Modeling the dynamics of flapping wing aerial vehicle is challenging due to the complexity of aerodynamic effects and mechanical structures.The aim of this work is to develop an accurate dynamics model of flapping win...Modeling the dynamics of flapping wing aerial vehicle is challenging due to the complexity of aerodynamic effects and mechanical structures.The aim of this work is to develop an accurate dynamics model of flapping wing aerial vehicle based on real flight data.We propose a modeling framework that combines rigid body dynamics with a neural network to predict aerodynamic effects.By incorporating the concept of flapping phase,we significantly enhance the network’s ability to analyze transient aerodynamic behavior.We design and utilize a phase-functioned neural network structure for aerodynamic predictions and train the network using real flight data.Evaluation results show that the network can predict aerodynamic effects and demonstrate clear physical significance.We verify that the framework can be used for dynamic propagation and is expected to be utilized for building simulators for flapping wing aerial vehicles.展开更多
Flapping Wing Micro Aerial Vehicles(FWMAVs)have caused great concern in various fields because of their high efficiency and maneuverability.Flapping wing motion is a very important factor that affects the performance ...Flapping Wing Micro Aerial Vehicles(FWMAVs)have caused great concern in various fields because of their high efficiency and maneuverability.Flapping wing motion is a very important factor that affects the performance of the aircraft,and previous works have always focused on the time-averaged performance optimization.However,the time-history performance is equally important in the design of motion mechanism and flight control system.In this paper,a time-history performance optimization framework based on deep learning and multi-island genetic algorithm is presented,which is designed in order to obtain the optimal two-dimensional flapping wing motion.Firstly,the training dataset for deep learning neural network is constructed based on a validated computational fluid dynamics method.The aerodynamic surrogate model for flapping wing is obtained after the convergence of training.The surrogate model is tested and proved to be able to accurately and quickly predict the time-history curves of lift,thrust and moment.Secondly,the optimization framework is used to optimize the flapping wing motion in two specific cases,in which the optimized propulsive efficiencies have been improved by over 40%compared with the baselines.Thirdly,a dimensionless parameter C_(variation)is proposed to describe the variation of the time-history characteristics,and it is found that C_(variation)of lift varies significantly even under close time-averaged performances.Considering the importance of time-history performance in practical applications,the optimization that integrates the propulsion efficiency as well as C_(variation)is carried out.The final optimal flapping wing motion balances good time-averaged and time-history performance.展开更多
Certain insect species have been observed to exploit the resonance mechanism of their wings.In order to achieve resonance and optimize aerodynamic performance,the conventional approach is to set the flapping frequency...Certain insect species have been observed to exploit the resonance mechanism of their wings.In order to achieve resonance and optimize aerodynamic performance,the conventional approach is to set the flapping frequency of flexible wings based on the Traditional Structural Modal(TSM)analysis.However,there exists controversy among researchers regarding the relationship between frequency and aerodynamic performance.Recognizing that the structural response of wings can be influenced by the surrounding air vibrations,an analysis known as Acoustic Structure Interaction Modal(ASIM)is introduced to calculate the resonant frequency.In this study,Fluid Structure Interaction(FSI)simulations are employed to investigate the aerodynamic performance of flapping wings at modal frequencies derived from both TSM and ASIM analyses.The performance is evaluated for various mass ratios and frequency ratios,and the findings indicate that the deformation and changes in vortex structure exhibit similarities at mass ratios that yield the highest aerodynamic performance.Notably,the flapping frequency associated with the maximum time-averaged vertical force coefficient at each mass ratio closely aligns with the ASIM frequency,as does the frequency corresponding to maximum efficiency.Thus,the ASIM analysis can provide an effective means for predicting the optimal flapping frequency for flexible wings.Furthermore,it enables the prediction that flexible wings with varying mass ratios will exhibit similar deformation and vortex structure changes.This paper offers a fresh perspective on the ongoing debate concerning the resonance mechanism of Flexible Flapping Wings(FFWs)and proposes an effective methodology for predicting their aerodynamic performance.展开更多
To better understand the aerodynamic reasons for highly organized movements of flying organisms,the three-flapping wing system in tandem formation was studied numerically in this paper.Different from previous relevant...To better understand the aerodynamic reasons for highly organized movements of flying organisms,the three-flapping wing system in tandem formation was studied numerically in this paper.Different from previous relevant studies on the multiple flapping wings that are equally spaced,this study emphasizes the impact of unequal spacing between individuals on the aerodynamics of each individual wing as well as the whole system.It is found that swapping the distance between the first and second wing with the distance between the second wing and the rearmost wing does not affect the overall aerodynamic performance,but significantly changes the distribution of aerodynamic benefits across each wing.During the whole flapping cycle,three effects are at play.The narrow channel effect and the downwash effect can promote and weaken the wing lift,respectively,while the wake capture effect can boost the thrust.It also shows that these effects could be manipulated by changing the spacing between adjacent wings.These findings provide a novel way for flow control in tandem formation flight and are also inspiring for designing the formation flight of bionic aircraft.展开更多
Compared to the traditional flapping-wing structure with single motion mode,a micro servoactuator driven Flapping-Wing Air Vehicle(FWAV)breaks free from the limitations imposed by the motion parameters of the crank-co...Compared to the traditional flapping-wing structure with single motion mode,a micro servoactuator driven Flapping-Wing Air Vehicle(FWAV)breaks free from the limitations imposed by the motion parameters of the crank-connecting rod mechanism.It allows for simultaneous control of wings’position and velocity attitude through pulse width modulation,showcasing unrivaled controllability and promising extensive applications.However,this method of motion control also brings new challenges to the design of the wings’motion parameters.This study seeks to investigate the relationship between the motion parameters of micro servoactuator driven FWAV and its aerodynamic characteristics,then explore a servo control method that can optimize its thrust-producing performance.To achieve this,this paper involves the establishment of Amplitude Loss Model(ALM),Flapping Wing Dynamic Model(FWDM),and Power Load Model(PLM),followed by motion capture experiments,dynamic monitoring experiments,and power monitoring experiments.Experimental results show that the proposed modeling method,which fully considers the amplitude loss effect and advanced twisting effect in flapping-wing motion,can accurately calculate thrust,power,and power load,with prediction errors of less than 10%,5%and 13%,respectively.This high-precision model can effectively optimize motion parameters,allowing for better performance of flapping-wing motion.展开更多
The development of a tailless Flapping Wing Micro Aerial Vehicle(FWMAV)inspired by the hummingbird is presented in this work.By implementing mechanical simplifications,it is possible to use planar machining technology...The development of a tailless Flapping Wing Micro Aerial Vehicle(FWMAV)inspired by the hummingbird is presented in this work.By implementing mechanical simplifications,it is possible to use planar machining technology for manufacturing of the FWMAV’s body,greatly reducing assembly errors.Traditionally,studies on flapping wing aircraft are limited to open-loop wing kinematics control.In this work,an instantaneous closed-loop wing trajectory tracking control system is introduced to minimize wings’trajectory tracking errors.The control system is based on Field-Oriented Control(FOC)with a loop shaping compensation technique near the flapping frequency.Through frequency analysis,the loop shaping compensator ensures the satisfactory bandwidth and performance for the closed-loop flapping system.To implement the proposed controller,a compact autopilot board integrated with FOC hardware is designed,weighing only 2.5 g.By utilizing precise wing trajectory tracking control,the hummingbird-inspired FWMAV demonstrates superior ability to resist external disturbances and exhibits reduced attitude tracking errors during hovering flight compared to the open-loop wing motion.展开更多
The current work aims at employing a gradient descent algorithm for optimizing the thrust of a flapping wing. An in-house solver has been employed, along with mesh movement methodologies to capture the dynamics of flo...The current work aims at employing a gradient descent algorithm for optimizing the thrust of a flapping wing. An in-house solver has been employed, along with mesh movement methodologies to capture the dynamics of flow around the airfoil. An efficient framework for implementing the coupled solver and optimization in a multicore environment has been implemented for the generation of optimized solutionsmaximizing thrust performance & computational speed.展开更多
A generic approach to model the kinematics and aerodynamics of flapping wing ornithopter has been followed, to model and analyze a flapping bi- and quad-wing ornithopter and to mimic flapping wing biosystems to produc...A generic approach to model the kinematics and aerodynamics of flapping wing ornithopter has been followed, to model and analyze a flapping bi- and quad-wing ornithopter and to mimic flapping wing biosystems to produce lift and thrust for hovering and forward flight. Considerations are given to the motion of a rigid and thin bi-wing and quad-wing ornithopter in flapping and pitching motion with phase lag. Basic Unsteady Aerodynamic Approach incorporating salient features of viscous effect and leading-edge suction are utilized. Parametric study is carried out to reveal the aerodynamic characteristics of flapping bi- and quad-wing ornithopter flight characteristics and for comparative analysis with various selected simple models in the literature, in an effort to develop a flapping bi- and quad-wing ornithopter models. In spite of their simplicity, results obtained for both models are able to reveal the mechanism of lift and thrust, and compare well with other work.展开更多
The application of biomimetics in the development of unmanned-aerial-vehicles （UAV） has advanced to an exceptionally small scale of nano-aerial-vehicles （NAV）, which has surpassed its immediate predecessor of micr...The application of biomimetics in the development of unmanned-aerial-vehicles （UAV） has advanced to an exceptionally small scale of nano-aerial-vehicles （NAV）, which has surpassed its immediate predecessor of micro-aerial-vehicles （MAV）, leaving a vast range of development possi- bilities that MAVs have to offer. Because of the prompt advancement into the NAV research devel- opment, the true potential and challenges presented by MAV development were never solved, understood, and truly uncovered, especially under the influence of transition and low Reynolds number flow characteristics. This paper reviews a part of previous MAV research developments which are deemed important of notification; kinematics, membranes, and flapping mechanisms ranges from small birds to big insects, which resides within the transition and low Reynolds number regimes. This paper also reviews the possibility of applying a piezoelectric transmission used to pro- duce NAV flapping wing motion and mounted on a MAV, replacing the conventional motorized flapping wing transmission. Findings suggest that limited work has been done for MAVs matching these criteria. The preferred research approach has seen bias towards numerical analysis as compared to experimental analysis.展开更多
A three-wing Flapping Wing Rotor Micro Aerial Vehicle(FWR-MAV)which can perform controlled flight is introduced and an experimental study on this vehicle is presented.A mechanically driven flapping rotary mechanism is...A three-wing Flapping Wing Rotor Micro Aerial Vehicle(FWR-MAV)which can perform controlled flight is introduced and an experimental study on this vehicle is presented.A mechanically driven flapping rotary mechanism is designed to drive the three flapping wings and generate lift,and control mechanisms are designed to control the pose of the FWR-MAV.A flight control board for attitude control with robust onboard attitude estimation and a control algorithm is also developed to perform stable hovering flight and forward flight.A series of flight tests was conducted,with hovering flight and forward flight tests performed to optimize the control parameters and assess the performance of the FWR-MAV.The hovering flight test shows the ability of the FWR-MAV to counteract the moment generated by rotary motion and maintain the attitude of the FWR-MAV in space;the experiment of forward flight shows that the FWR-MAV can track the desired attitude.展开更多
Most insects and hummingbirds can generate lift during both upstroke and downstroke with a nearly horizontal flapping stroke plane,and perform precise hovering flight.Further,most birds can utilize tails and muscles i...Most insects and hummingbirds can generate lift during both upstroke and downstroke with a nearly horizontal flapping stroke plane,and perform precise hovering flight.Further,most birds can utilize tails and muscles in wings to actively control the flight performance,while insects control their flight with muscles based on wing root along with wing’s passive deformation.Based on the above flight principles of birds and insects,Flapping Wing Micro Air Vehicles(FWMAVs)are classified as either bird-inspired or insect-inspired FWMAVs.In this review,the research achievements on mechanisms of insect-inspired,hoverable FWMAVs over the last ten years(2011-2020)are provided.We also provide the definition,function,research status and development prospect of hoverable FWMAVs.Then discuss it from three aspects:bio-inspiration,motor-driving mechanisms and intelligent actuator-driving mechanisms.Following this,research groups involved in insect-inspired,hoverable FWMAV research and their major achievements are summarized and classified in tables.Problems,trends and challenges about the mechanism are compiled and presented.Finally,this paper presents conclusions about research on mechanical structure,and the future is discussed to enable further research interests.展开更多
This paper establishes and analyzes a high-fidelity nonlinear time-periodic dynamic model and the corresponding state observer for flapping vibration suppression of a novel tailless Flapping Wing Micro Air Vehicle(FWM...This paper establishes and analyzes a high-fidelity nonlinear time-periodic dynamic model and the corresponding state observer for flapping vibration suppression of a novel tailless Flapping Wing Micro Air Vehicle(FWMAV),named NPU-Tinybird.Firstly,a complete modeling of NPU-Tinybird is determined,including the aerodynamic model based on the quasi-steady method,the kinematic and dynamic model about the mechanism of flapping and attitude control,combined with the single rigid body dynamic model.Based on this,a linearized longitudinal pitch dynamic cycle-averaged model is obtained and analyzed through the methods of neural network fitting and system identification,preparing for the design of flapping vibration suppression observer.Flapping vibration is an inherent property of the tailless FWMAV,which arises from the influence of time-periodic aerodynamic forces and moments.It can be captured by attitude and position sensors on the plane,which impairs the flight performance and efficiency of flight controller and actuators.To deal with this problem,a novel state observer for flapping vibration suppression is designed.A robust optimal controller based on the linear quadratic theory is also designed to stabilize the closed-loop system.Simulation results are given to verify the performance of the observer,including the closed loop responses combined with robust optimal controller,the comparison of different parameters of observer and the comparison with several classic methods,such as Kalman filter,H-infinity filter and low-pass filter,which prove that the novel observer owns a fairly good suppression effect on flapping vibration and benefits for the improvement of flight performance and control efficiency.展开更多
With the goal of designing a biologically inspired robot that can hold a stable hover under internal and external disturbances.We designed a tailless Flapping-wing Micro Aerial Vehicle(FMAV)with onboard 3D velocity pe...With the goal of designing a biologically inspired robot that can hold a stable hover under internal and external disturbances.We designed a tailless Flapping-wing Micro Aerial Vehicle(FMAV)with onboard 3D velocity perception.In this way,the wind disturbance caused by the relative motion of the FMAV can be quantified in real time based on the established altitudinal dynamics model.For the rest of the total disturbance,an active disturbance rejection controller is proposed to estimate and suppress those disturbances.In comparison with the traditional PID controller,this proposed approach has been validated.The results show that,in the hovering flight with the internal unmodeled dynamics,the root-mean-square of height controlled is only 2.53 cm.Even with the different weights of loads mounting on the FMAV,the ascending trajectory of flights remains impressively consistent.In the forward flight with the external disturbance,the root-mean-square error of height controlled is 2.78 cm.When the FMAV flies over a ladder introducing an abrupt external disturbance,the maximum overshoot is only half of that controlled by the PID controller.To our best knowledge,this is the first demonstration of FMAVs with the capability of sensing motion-generated wind disturbance onboard and handling the internal and external disturbances in hover flight.展开更多
Dragonflies have naturally high flying ability and flight maneuverability,making them more adaptable to harsh ecological environments.In this paper,a flapping wing bionic air vehicle with three-degrees-of-freedom is d...Dragonflies have naturally high flying ability and flight maneuverability,making them more adaptable to harsh ecological environments.In this paper,a flapping wing bionic air vehicle with three-degrees-of-freedom is designed and manufactured by simulating the flight mode of dragonfly.Firstly,the body structure of dragonfly was analyzed,and then the design scheme of flapping wing micro air vehicle was proposed based on the flight motion characteristics and musculoskeletal system of dragonfly.By optimizing the configuration and using Adams to do kinematic simulation,it is shown that the designed structure can make the wings move in an“8”shape trajectory,and the motion in three directions can maintain good consistency,with good dynamic performance.Based on CFD simulation method,we analyzed that the wing has the conditions to achieve flight with good aerodynamic performance at the incoming flow speed of 5 m s^(-1)and frequency of 4 Hz,and studied the effects of angle of attack and flutter frequency on the aerodynamic performance of the aircraft.Finally,the force measurement test of the aircraft prototype is carried out using a force balance and a small wind tunnel.The test results show that the prototype can provide the average lift of 3.62 N and the average thrust of 2.54 N,which are in good agreement with the simulation results.展开更多
Morphology as well as kinematics is a critical determinant of performance in flapping flight.To understand the effects of the structural traits on aerodynamics of bioflyers,three rectangular wings with aspect ratios...Morphology as well as kinematics is a critical determinant of performance in flapping flight.To understand the effects of the structural traits on aerodynamics of bioflyers,three rectangular wings with aspect ratios（AR）of1,2,and 4 performing hovering-like sinusoidal kinematics at wingtip based Reynolds number of 5 300 are experimentally investigated.Flow structures on sectional cuts along the wing span are compared.Stronger K-H instability is found on the leading edge vortex of wings with higher aspect ratios.Vortex bursting only appears on the outer spanwise locations of high-aspect-ratio wings.The vortex bursting on high-aspect-ratio wings is perhaps one of the reasons why bio-flyers normally have low-aspect-ratio wings.Quantitative analysis exhibits larger dimensionless circulation of the leading edge vortex（LEV）over higher aspect ratio wings except when vortex bursting happens.The average dimensionless circulation of AR1 and AR2 along the span almost equals the dimensionless circulation at the 50%span.The flow structure and the circulation analysis show that the sinusoidal kinematics suppresses breakdown of the LEV compared with simplified flapping kinematics used in similar studies.The Reynolds number effect results on AR4 show that in the current Re range,the overall flow structure is not sensitive to Reynolds number.展开更多
Bird-like flapping-wing vehicles with a high aspect ratio have the potential to fulfill missions given to micro air vehicles,such as high-altitude reconnaissance,surveillance,rescue,and bird group guidance,due to thei...Bird-like flapping-wing vehicles with a high aspect ratio have the potential to fulfill missions given to micro air vehicles,such as high-altitude reconnaissance,surveillance,rescue,and bird group guidance,due to their good loading and long endurance capacities.Biologists and aeronautical researchers have explored the mystery of avian flight and made efforts to reproduce flapping flight in bioinspired aircraft for decades.However,the cognitive depth from theory to practice is still very limited.The mechanism of generating sufficient lift and thrust during avian flight is still not fully understood.Moving wings with unique biological structures such as feathers make modeling,simulation,experimentation,and analysis much more difficult.This paper reviews the research progress on bird-like flapping wings from flight mechanisms to modeling.Commonly used numerical computing methods are briefly compared.The aeroelastic problems are also highlighted.The results of the investigation show that a leading-edge vortex can be found during avian flight.Its induction and maintenance may have a close relationship with wing configuration,kinematics and deformation.The present models of flapping wings are mainly two-dimensional airfoils or three-dimensional single root-jointed geometric plates,which still exhibit large differences from real bird wings.Aeroelasticity is encouraged to consider the nonignorable effect on aerodynamic performance due to large-scale nonlinear deformation.Introducing appropriate flexibility can improve the peak values and efficiencies of lift and thrust,but the detailed conclusions always have strong background dependence.展开更多
The 3D model of flapping wing mechanism and veins is constructed in 3D computer aided design (CAD) software UG.Then the co-simulation model is established by using multibody dynamics software ADAMS and MATLAB.The vali...The 3D model of flapping wing mechanism and veins is constructed in 3D computer aided design (CAD) software UG.Then the co-simulation model is established by using multibody dynamics software ADAMS and MATLAB.The validation of this co-simulation model is verified by comparing the simulation results with final experiments.The simulation results and experiments reveal that the relation between flapping frequency and driving voltage of motor is approximately linear under various wingspans.The variance of flapping frequency among different wingspans augments gradually with increasing voltage.Furthermore,the simulation results suggest that flapping frequency is sensitive to wingspan and decreases with increasing wingspan of veins,and the relation between flapping frequency and moment of inertia of veins is also approximately linear for various voltages.展开更多
In order to design and verify control algorithms for flapping wing aerial vehicles(FWAVs),calculation models of the translational force,rotational force and virtual mass force were established with the basis on the mo...In order to design and verify control algorithms for flapping wing aerial vehicles(FWAVs),calculation models of the translational force,rotational force and virtual mass force were established with the basis on the modified quasi-steady aerodynamic theory and high lift mechanisms of insect flight.The simulation results show that the rotational force and virtual mass force can be ignored in the hovering FWAVs with simple harmonic motions in a cycle.The effects of the wing deformation on aerodynamic forces were investigated by regarding the maximum rotational angle of wingtip as a reference variable.The simulation results also show that the average lift coefficient increases and drag coefficient decreases with the increase of the maximum rotational angle of wingtip in the range of 0-90°.展开更多
In this project,the miniaturization of the aircraft was realized under the premise of strong maneuverability,high concealability,and driving a certain load,and the flight mode and structural characteristics of birds w...In this project,the miniaturization of the aircraft was realized under the premise of strong maneuverability,high concealability,and driving a certain load,and the flight mode and structural characteristics of birds were imitated.A small bionic flapping wing aircraft was built.The flapping of the wing was realized by the crank slider mechanism,and the sizes of each part were calculated according to the bionics formula.The wingspan was 360.37 mm,the body width was 22 mm,the body length was 300 mm,the wing area was 0.05 m^(2),the flapping amplitude was 71°.ADAMS software was used to simulate the dynamics of the designed aircraft,and the variation of flapping amplitude and angular velocity during the movement of the aircraft was obtained,which verified the feasibility of the mechanism.The prototype aircraft was made for flight test,and the designed bionic flapping wing aircraft achieved the expected effect.It provides a theoretical basis and data support for the design and manufacture of small flapping wing aircraft.展开更多
基金supported by National Natural Science Foundation of China under Grant No.62236007the specialized research projects of Huanjiang Laboratory.
文摘Modeling the dynamics of flapping wing aerial vehicle is challenging due to the complexity of aerodynamic effects and mechanical structures.The aim of this work is to develop an accurate dynamics model of flapping wing aerial vehicle based on real flight data.We propose a modeling framework that combines rigid body dynamics with a neural network to predict aerodynamic effects.By incorporating the concept of flapping phase,we significantly enhance the network’s ability to analyze transient aerodynamic behavior.We design and utilize a phase-functioned neural network structure for aerodynamic predictions and train the network using real flight data.Evaluation results show that the network can predict aerodynamic effects and demonstrate clear physical significance.We verify that the framework can be used for dynamic propagation and is expected to be utilized for building simulators for flapping wing aerial vehicles.
基金This work was supported by the specialized research projects of Huanjiang Laboratory,and the Defence Industrial Technology Development Programme,China(Nos.JCKY2019205A006,JCKY2021205B003).
文摘Flapping Wing Micro Aerial Vehicles(FWMAVs)have caused great concern in various fields because of their high efficiency and maneuverability.Flapping wing motion is a very important factor that affects the performance of the aircraft,and previous works have always focused on the time-averaged performance optimization.However,the time-history performance is equally important in the design of motion mechanism and flight control system.In this paper,a time-history performance optimization framework based on deep learning and multi-island genetic algorithm is presented,which is designed in order to obtain the optimal two-dimensional flapping wing motion.Firstly,the training dataset for deep learning neural network is constructed based on a validated computational fluid dynamics method.The aerodynamic surrogate model for flapping wing is obtained after the convergence of training.The surrogate model is tested and proved to be able to accurately and quickly predict the time-history curves of lift,thrust and moment.Secondly,the optimization framework is used to optimize the flapping wing motion in two specific cases,in which the optimized propulsive efficiencies have been improved by over 40%compared with the baselines.Thirdly,a dimensionless parameter C_(variation)is proposed to describe the variation of the time-history characteristics,and it is found that C_(variation)of lift varies significantly even under close time-averaged performances.Considering the importance of time-history performance in practical applications,the optimization that integrates the propulsion efficiency as well as C_(variation)is carried out.The final optimal flapping wing motion balances good time-averaged and time-history performance.
基金This study was co-supported by the National Natural Science Foundation of China(No.52275293)the Guangdong Basic and Applied Basic Research Foundation,China(No.2023A1515010774)+1 种基金the Basic Research Program of Shenzhen,China(No.JCYJ 20190806142816524)the National Key Laboratory of Science and Technology on Aerodynamic Design and Research,China(No.61422010301).
文摘Certain insect species have been observed to exploit the resonance mechanism of their wings.In order to achieve resonance and optimize aerodynamic performance,the conventional approach is to set the flapping frequency of flexible wings based on the Traditional Structural Modal(TSM)analysis.However,there exists controversy among researchers regarding the relationship between frequency and aerodynamic performance.Recognizing that the structural response of wings can be influenced by the surrounding air vibrations,an analysis known as Acoustic Structure Interaction Modal(ASIM)is introduced to calculate the resonant frequency.In this study,Fluid Structure Interaction(FSI)simulations are employed to investigate the aerodynamic performance of flapping wings at modal frequencies derived from both TSM and ASIM analyses.The performance is evaluated for various mass ratios and frequency ratios,and the findings indicate that the deformation and changes in vortex structure exhibit similarities at mass ratios that yield the highest aerodynamic performance.Notably,the flapping frequency associated with the maximum time-averaged vertical force coefficient at each mass ratio closely aligns with the ASIM frequency,as does the frequency corresponding to maximum efficiency.Thus,the ASIM analysis can provide an effective means for predicting the optimal flapping frequency for flexible wings.Furthermore,it enables the prediction that flexible wings with varying mass ratios will exhibit similar deformation and vortex structure changes.This paper offers a fresh perspective on the ongoing debate concerning the resonance mechanism of Flexible Flapping Wings(FFWs)and proposes an effective methodology for predicting their aerodynamic performance.
基金supported by the National Natural Science Foundation of China(Grant No.12172276)Shaanxi key research and development program(Grant No.2022ZDLGY02-07).
文摘To better understand the aerodynamic reasons for highly organized movements of flying organisms,the three-flapping wing system in tandem formation was studied numerically in this paper.Different from previous relevant studies on the multiple flapping wings that are equally spaced,this study emphasizes the impact of unequal spacing between individuals on the aerodynamics of each individual wing as well as the whole system.It is found that swapping the distance between the first and second wing with the distance between the second wing and the rearmost wing does not affect the overall aerodynamic performance,but significantly changes the distribution of aerodynamic benefits across each wing.During the whole flapping cycle,three effects are at play.The narrow channel effect and the downwash effect can promote and weaken the wing lift,respectively,while the wake capture effect can boost the thrust.It also shows that these effects could be manipulated by changing the spacing between adjacent wings.These findings provide a novel way for flow control in tandem formation flight and are also inspiring for designing the formation flight of bionic aircraft.
基金supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China(No.51521003)the Natural Science Foundation of Heilongjiang Province(No.ZD2023E002)+1 种基金HIT Wuhu Robot Technology Research Institute(No.HIT-CXY-CMP2-RVJDT-21-01)the Open Fund for Laboratory of Aerospace Servo Actuation and Transmission(No.LASAT-2022-A01-02).
文摘Compared to the traditional flapping-wing structure with single motion mode,a micro servoactuator driven Flapping-Wing Air Vehicle(FWAV)breaks free from the limitations imposed by the motion parameters of the crank-connecting rod mechanism.It allows for simultaneous control of wings’position and velocity attitude through pulse width modulation,showcasing unrivaled controllability and promising extensive applications.However,this method of motion control also brings new challenges to the design of the wings’motion parameters.This study seeks to investigate the relationship between the motion parameters of micro servoactuator driven FWAV and its aerodynamic characteristics,then explore a servo control method that can optimize its thrust-producing performance.To achieve this,this paper involves the establishment of Amplitude Loss Model(ALM),Flapping Wing Dynamic Model(FWDM),and Power Load Model(PLM),followed by motion capture experiments,dynamic monitoring experiments,and power monitoring experiments.Experimental results show that the proposed modeling method,which fully considers the amplitude loss effect and advanced twisting effect in flapping-wing motion,can accurately calculate thrust,power,and power load,with prediction errors of less than 10%,5%and 13%,respectively.This high-precision model can effectively optimize motion parameters,allowing for better performance of flapping-wing motion.
基金support by the National Natural Science Foundation of China(No.62073217,No.61871266)the Fund of the Ministry of Education of the People’s Republic of China(6141A02022607,6141A020227)the Fund of the Professional Technical Service Platform of Shanghai(19DZ2291103).
文摘The development of a tailless Flapping Wing Micro Aerial Vehicle(FWMAV)inspired by the hummingbird is presented in this work.By implementing mechanical simplifications,it is possible to use planar machining technology for manufacturing of the FWMAV’s body,greatly reducing assembly errors.Traditionally,studies on flapping wing aircraft are limited to open-loop wing kinematics control.In this work,an instantaneous closed-loop wing trajectory tracking control system is introduced to minimize wings’trajectory tracking errors.The control system is based on Field-Oriented Control(FOC)with a loop shaping compensation technique near the flapping frequency.Through frequency analysis,the loop shaping compensator ensures the satisfactory bandwidth and performance for the closed-loop flapping system.To implement the proposed controller,a compact autopilot board integrated with FOC hardware is designed,weighing only 2.5 g.By utilizing precise wing trajectory tracking control,the hummingbird-inspired FWMAV demonstrates superior ability to resist external disturbances and exhibits reduced attitude tracking errors during hovering flight compared to the open-loop wing motion.
文摘The current work aims at employing a gradient descent algorithm for optimizing the thrust of a flapping wing. An in-house solver has been employed, along with mesh movement methodologies to capture the dynamics of flow around the airfoil. An efficient framework for implementing the coupled solver and optimization in a multicore environment has been implemented for the generation of optimized solutionsmaximizing thrust performance & computational speed.
文摘A generic approach to model the kinematics and aerodynamics of flapping wing ornithopter has been followed, to model and analyze a flapping bi- and quad-wing ornithopter and to mimic flapping wing biosystems to produce lift and thrust for hovering and forward flight. Considerations are given to the motion of a rigid and thin bi-wing and quad-wing ornithopter in flapping and pitching motion with phase lag. Basic Unsteady Aerodynamic Approach incorporating salient features of viscous effect and leading-edge suction are utilized. Parametric study is carried out to reveal the aerodynamic characteristics of flapping bi- and quad-wing ornithopter flight characteristics and for comparative analysis with various selected simple models in the literature, in an effort to develop a flapping bi- and quad-wing ornithopter models. In spite of their simplicity, results obtained for both models are able to reveal the mechanism of lift and thrust, and compare well with other work.
文摘The application of biomimetics in the development of unmanned-aerial-vehicles （UAV） has advanced to an exceptionally small scale of nano-aerial-vehicles （NAV）, which has surpassed its immediate predecessor of micro-aerial-vehicles （MAV）, leaving a vast range of development possi- bilities that MAVs have to offer. Because of the prompt advancement into the NAV research devel- opment, the true potential and challenges presented by MAV development were never solved, understood, and truly uncovered, especially under the influence of transition and low Reynolds number flow characteristics. This paper reviews a part of previous MAV research developments which are deemed important of notification; kinematics, membranes, and flapping mechanisms ranges from small birds to big insects, which resides within the transition and low Reynolds number regimes. This paper also reviews the possibility of applying a piezoelectric transmission used to pro- duce NAV flapping wing motion and mounted on a MAV, replacing the conventional motorized flapping wing transmission. Findings suggest that limited work has been done for MAVs matching these criteria. The preferred research approach has seen bias towards numerical analysis as compared to experimental analysis.
基金supported by the National Natural Science Foundation of China(No.:11572023)。
文摘A three-wing Flapping Wing Rotor Micro Aerial Vehicle(FWR-MAV)which can perform controlled flight is introduced and an experimental study on this vehicle is presented.A mechanically driven flapping rotary mechanism is designed to drive the three flapping wings and generate lift,and control mechanisms are designed to control the pose of the FWR-MAV.A flight control board for attitude control with robust onboard attitude estimation and a control algorithm is also developed to perform stable hovering flight and forward flight.A series of flight tests was conducted,with hovering flight and forward flight tests performed to optimize the control parameters and assess the performance of the FWR-MAV.The hovering flight test shows the ability of the FWR-MAV to counteract the moment generated by rotary motion and maintain the attitude of the FWR-MAV in space;the experiment of forward flight shows that the FWR-MAV can track the desired attitude.
文摘Most insects and hummingbirds can generate lift during both upstroke and downstroke with a nearly horizontal flapping stroke plane,and perform precise hovering flight.Further,most birds can utilize tails and muscles in wings to actively control the flight performance,while insects control their flight with muscles based on wing root along with wing’s passive deformation.Based on the above flight principles of birds and insects,Flapping Wing Micro Air Vehicles(FWMAVs)are classified as either bird-inspired or insect-inspired FWMAVs.In this review,the research achievements on mechanisms of insect-inspired,hoverable FWMAVs over the last ten years(2011-2020)are provided.We also provide the definition,function,research status and development prospect of hoverable FWMAVs.Then discuss it from three aspects:bio-inspiration,motor-driving mechanisms and intelligent actuator-driving mechanisms.Following this,research groups involved in insect-inspired,hoverable FWMAV research and their major achievements are summarized and classified in tables.Problems,trends and challenges about the mechanism are compiled and presented.Finally,this paper presents conclusions about research on mechanical structure,and the future is discussed to enable further research interests.
基金financial support of the projects from National Key Research and Development Program of China(No.2017YFB1300102)National Natural Science Foundation of China(Nos.11872314 and U1613227)Youth Program of Natural Science Basic Research Plan in Shaanxi Province of China(No.2019JQ-394)。
文摘This paper establishes and analyzes a high-fidelity nonlinear time-periodic dynamic model and the corresponding state observer for flapping vibration suppression of a novel tailless Flapping Wing Micro Air Vehicle(FWMAV),named NPU-Tinybird.Firstly,a complete modeling of NPU-Tinybird is determined,including the aerodynamic model based on the quasi-steady method,the kinematic and dynamic model about the mechanism of flapping and attitude control,combined with the single rigid body dynamic model.Based on this,a linearized longitudinal pitch dynamic cycle-averaged model is obtained and analyzed through the methods of neural network fitting and system identification,preparing for the design of flapping vibration suppression observer.Flapping vibration is an inherent property of the tailless FWMAV,which arises from the influence of time-periodic aerodynamic forces and moments.It can be captured by attitude and position sensors on the plane,which impairs the flight performance and efficiency of flight controller and actuators.To deal with this problem,a novel state observer for flapping vibration suppression is designed.A robust optimal controller based on the linear quadratic theory is also designed to stabilize the closed-loop system.Simulation results are given to verify the performance of the observer,including the closed loop responses combined with robust optimal controller,the comparison of different parameters of observer and the comparison with several classic methods,such as Kalman filter,H-infinity filter and low-pass filter,which prove that the novel observer owns a fairly good suppression effect on flapping vibration and benefits for the improvement of flight performance and control efficiency.
基金Supporting Foundation of the Ministry of Education of the People’s Republic of China(6141A02022607,6141A02022627).
文摘With the goal of designing a biologically inspired robot that can hold a stable hover under internal and external disturbances.We designed a tailless Flapping-wing Micro Aerial Vehicle(FMAV)with onboard 3D velocity perception.In this way,the wind disturbance caused by the relative motion of the FMAV can be quantified in real time based on the established altitudinal dynamics model.For the rest of the total disturbance,an active disturbance rejection controller is proposed to estimate and suppress those disturbances.In comparison with the traditional PID controller,this proposed approach has been validated.The results show that,in the hovering flight with the internal unmodeled dynamics,the root-mean-square of height controlled is only 2.53 cm.Even with the different weights of loads mounting on the FMAV,the ascending trajectory of flights remains impressively consistent.In the forward flight with the external disturbance,the root-mean-square error of height controlled is 2.78 cm.When the FMAV flies over a ladder introducing an abrupt external disturbance,the maximum overshoot is only half of that controlled by the PID controller.To our best knowledge,this is the first demonstration of FMAVs with the capability of sensing motion-generated wind disturbance onboard and handling the internal and external disturbances in hover flight.
基金the financial support from the National Nature Science Foundation of China(NSFC)(U1601203,U19A20104)Jilin Province Science and Technology Development Program(20180101321JC,20190302099GX)+1 种基金Jilin Province Industrial Technology of Research and Development(2019C037-3)Science and Technology Project of Jilin Provincial Department of Education(JJKH20200955KJ).
文摘Dragonflies have naturally high flying ability and flight maneuverability,making them more adaptable to harsh ecological environments.In this paper,a flapping wing bionic air vehicle with three-degrees-of-freedom is designed and manufactured by simulating the flight mode of dragonfly.Firstly,the body structure of dragonfly was analyzed,and then the design scheme of flapping wing micro air vehicle was proposed based on the flight motion characteristics and musculoskeletal system of dragonfly.By optimizing the configuration and using Adams to do kinematic simulation,it is shown that the designed structure can make the wings move in an“8”shape trajectory,and the motion in three directions can maintain good consistency,with good dynamic performance.Based on CFD simulation method,we analyzed that the wing has the conditions to achieve flight with good aerodynamic performance at the incoming flow speed of 5 m s^(-1)and frequency of 4 Hz,and studied the effects of angle of attack and flutter frequency on the aerodynamic performance of the aircraft.Finally,the force measurement test of the aircraft prototype is carried out using a force balance and a small wind tunnel.The test results show that the prototype can provide the average lift of 3.62 N and the average thrust of 2.54 N,which are in good agreement with the simulation results.
基金supported by the Innovation Technology Commission(ITC)of the Government of the Hong Kong Special Administrative Region(HKSAR)with Project(ITS/115/13FP)Hong Kong Ph.D.Fellowship Scheme from the Research Grants Council(RGC)
文摘Morphology as well as kinematics is a critical determinant of performance in flapping flight.To understand the effects of the structural traits on aerodynamics of bioflyers,three rectangular wings with aspect ratios（AR）of1,2,and 4 performing hovering-like sinusoidal kinematics at wingtip based Reynolds number of 5 300 are experimentally investigated.Flow structures on sectional cuts along the wing span are compared.Stronger K-H instability is found on the leading edge vortex of wings with higher aspect ratios.Vortex bursting only appears on the outer spanwise locations of high-aspect-ratio wings.The vortex bursting on high-aspect-ratio wings is perhaps one of the reasons why bio-flyers normally have low-aspect-ratio wings.Quantitative analysis exhibits larger dimensionless circulation of the leading edge vortex（LEV）over higher aspect ratio wings except when vortex bursting happens.The average dimensionless circulation of AR1 and AR2 along the span almost equals the dimensionless circulation at the 50%span.The flow structure and the circulation analysis show that the sinusoidal kinematics suppresses breakdown of the LEV compared with simplified flapping kinematics used in similar studies.The Reynolds number effect results on AR4 show that in the current Re range,the overall flow structure is not sensitive to Reynolds number.
文摘Bird-like flapping-wing vehicles with a high aspect ratio have the potential to fulfill missions given to micro air vehicles,such as high-altitude reconnaissance,surveillance,rescue,and bird group guidance,due to their good loading and long endurance capacities.Biologists and aeronautical researchers have explored the mystery of avian flight and made efforts to reproduce flapping flight in bioinspired aircraft for decades.However,the cognitive depth from theory to practice is still very limited.The mechanism of generating sufficient lift and thrust during avian flight is still not fully understood.Moving wings with unique biological structures such as feathers make modeling,simulation,experimentation,and analysis much more difficult.This paper reviews the research progress on bird-like flapping wings from flight mechanisms to modeling.Commonly used numerical computing methods are briefly compared.The aeroelastic problems are also highlighted.The results of the investigation show that a leading-edge vortex can be found during avian flight.Its induction and maintenance may have a close relationship with wing configuration,kinematics and deformation.The present models of flapping wings are mainly two-dimensional airfoils or three-dimensional single root-jointed geometric plates,which still exhibit large differences from real bird wings.Aeroelasticity is encouraged to consider the nonignorable effect on aerodynamic performance due to large-scale nonlinear deformation.Introducing appropriate flexibility can improve the peak values and efficiencies of lift and thrust,but the detailed conclusions always have strong background dependence.
基金the National Natural Science Foundationof China(No.60375033)
文摘The 3D model of flapping wing mechanism and veins is constructed in 3D computer aided design (CAD) software UG.Then the co-simulation model is established by using multibody dynamics software ADAMS and MATLAB.The validation of this co-simulation model is verified by comparing the simulation results with final experiments.The simulation results and experiments reveal that the relation between flapping frequency and driving voltage of motor is approximately linear under various wingspans.The variance of flapping frequency among different wingspans augments gradually with increasing voltage.Furthermore,the simulation results suggest that flapping frequency is sensitive to wingspan and decreases with increasing wingspan of veins,and the relation between flapping frequency and moment of inertia of veins is also approximately linear for various voltages.
基金National Natural Science Foundation of China(5177041109)。
文摘In order to design and verify control algorithms for flapping wing aerial vehicles(FWAVs),calculation models of the translational force,rotational force and virtual mass force were established with the basis on the modified quasi-steady aerodynamic theory and high lift mechanisms of insect flight.The simulation results show that the rotational force and virtual mass force can be ignored in the hovering FWAVs with simple harmonic motions in a cycle.The effects of the wing deformation on aerodynamic forces were investigated by regarding the maximum rotational angle of wingtip as a reference variable.The simulation results also show that the average lift coefficient increases and drag coefficient decreases with the increase of the maximum rotational angle of wingtip in the range of 0-90°.
文摘In this project,the miniaturization of the aircraft was realized under the premise of strong maneuverability,high concealability,and driving a certain load,and the flight mode and structural characteristics of birds were imitated.A small bionic flapping wing aircraft was built.The flapping of the wing was realized by the crank slider mechanism,and the sizes of each part were calculated according to the bionics formula.The wingspan was 360.37 mm,the body width was 22 mm,the body length was 300 mm,the wing area was 0.05 m^(2),the flapping amplitude was 71°.ADAMS software was used to simulate the dynamics of the designed aircraft,and the variation of flapping amplitude and angular velocity during the movement of the aircraft was obtained,which verified the feasibility of the mechanism.The prototype aircraft was made for flight test,and the designed bionic flapping wing aircraft achieved the expected effect.It provides a theoretical basis and data support for the design and manufacture of small flapping wing aircraft.
