The Reynolds analogy concept has been used in almost all turbulent reacting flow RANS(Reynoldsaveraged Navier–Stokes)simulations,where the turbulence scalar transfers in flow fields are calculated based on the modele...The Reynolds analogy concept has been used in almost all turbulent reacting flow RANS(Reynoldsaveraged Navier–Stokes)simulations,where the turbulence scalar transfers in flow fields are calculated based on the modeled turbulence momentum transfer.This concept,applied to a lean premixed combustion system,was assessed in this paper in terms of exit temperature distribution.Because of the isotropic assumption involved in this analogy,the prediction in some flow condition,such as jet cross flow mixing,would be inaccurate.In this study,using Flamelet Generated Manifold as reaction model,some of the numerical results,obtained from an annular combustor configuration with the turbulent Schmidt number varying from 0.85 to 0.2,were presented and compared with a benchmark atmospheric test results.It was found that the Schmidt numberσt in mean mass fraction f transport equation had significant effect on dilution air mixing process.The mixing between dilution air and reaction products from the primary zone obviously improved asσt decreased on the combustor exit surface.Meanwhile,the sensitivity ofσt in three turbulence models including Realizable k-ε,SST(Shear Stress Transport)and RSM(Reynolds Stress Model)has been compared as well.Since the calculation method of eddy viscosity was different within these three models,RSM was proved to be less sensitive than another two models and can guarantee the best prediction of mixing process condition.On the other hand,the results of dilution air mixing were almost independent of Schmidt number Sct in progress variable c transport equation.This study suggested that for accurate prediction of combustor exit temperature distribution in steady state reacting flow simulation,the turbulent Schmidt number in steady state simulation should be modified to cater to dilution air mixing process.展开更多
基金funded by the Key Programs of Chinese Academy of Sciences (Project No. ZDRW-CN-2017-2)
文摘The Reynolds analogy concept has been used in almost all turbulent reacting flow RANS(Reynoldsaveraged Navier–Stokes)simulations,where the turbulence scalar transfers in flow fields are calculated based on the modeled turbulence momentum transfer.This concept,applied to a lean premixed combustion system,was assessed in this paper in terms of exit temperature distribution.Because of the isotropic assumption involved in this analogy,the prediction in some flow condition,such as jet cross flow mixing,would be inaccurate.In this study,using Flamelet Generated Manifold as reaction model,some of the numerical results,obtained from an annular combustor configuration with the turbulent Schmidt number varying from 0.85 to 0.2,were presented and compared with a benchmark atmospheric test results.It was found that the Schmidt numberσt in mean mass fraction f transport equation had significant effect on dilution air mixing process.The mixing between dilution air and reaction products from the primary zone obviously improved asσt decreased on the combustor exit surface.Meanwhile,the sensitivity ofσt in three turbulence models including Realizable k-ε,SST(Shear Stress Transport)and RSM(Reynolds Stress Model)has been compared as well.Since the calculation method of eddy viscosity was different within these three models,RSM was proved to be less sensitive than another two models and can guarantee the best prediction of mixing process condition.On the other hand,the results of dilution air mixing were almost independent of Schmidt number Sct in progress variable c transport equation.This study suggested that for accurate prediction of combustor exit temperature distribution in steady state reacting flow simulation,the turbulent Schmidt number in steady state simulation should be modified to cater to dilution air mixing process.
