With the burgeoning growth of aquaculture industry,high concentration of NH_(4)^(+)-N,phosphorus and tetracycline are the prevalent pollutants in aquaculturewastewater posing a significant health risk to aquatic organ...With the burgeoning growth of aquaculture industry,high concentration of NH_(4)^(+)-N,phosphorus and tetracycline are the prevalent pollutants in aquaculturewastewater posing a significant health risk to aquatic organisms.Therefore,an effective method for treating aquaculture wastewater should be urgently explored.Simultaneous removal of NH_(4)^(+)-N,phosphorus,tetracycline,and chemical oxygen demand(COD)in aquaculture wastewater was developed bymoving bed biofilm reactor(MBBR)under co-metabolic substances.The result showed that co-metabolism substances had different effects on MBBR performance,and 79.4%of tetracycline,68.2%of NH_(4)^(+)-N,61.3%of total nitrogen,88.3%of COD,and 38.1%of total phosphorus(TP)were synchronously removed with sodium acetate as a co-metabolic carbon source.Protein(PN),polysaccharide(PS),and electron transfer system activity were used to evaluate the MBBR performances,suggesting that PN/PS ratio was 1.48,0.91,1.07,3.58,and 0.79 at phases Ⅰ-Ⅴ.Additionally,a mode of tetracycline degradation and TP removal was explored,and the cell apoptosis was evaluated by flow cytometry.The result suggested that 74%,83%,and 83%of tetracycline were degraded by extracellular extracts,intracellular extracts,and cell debris,and there was no difference between extracts and non-enzyme in TP removal.The ratio of viable and dead cells from biofilm reached 33.3%and 7.68%with sodium acetate as a co-metabolic carbon source.Furthermore,Proteobacteria and Bacteroidetes in biofilm were identified as the dominant phyla for tetracycline and nutrients removal.This study provides a new strategy for tetracycline and nutrients removal from aquaculture wastewater through co-metabolism.展开更多
Moving bed biofilm reactor （MBBR） was used to treat real coal gasification wastewater. Nitrification of the MBBR was inhibited almost completely during start-up period. Sudden increase of influent total NH 3 concent...Moving bed biofilm reactor （MBBR） was used to treat real coal gasification wastewater. Nitrification of the MBBR was inhibited almost completely during start-up period. Sudden increase of influent total NH 3 concentration was the main factor inducing nitrification inhibition. Increasing DO concentration in the bulk liquid （from 2 to 3 mg/L） had little effect on nitrification recovery. Nitrification of the MBBR recovered partially by the addition of nitrifying sludge into the reactor and almost ceased within 5 days. Nitrification ratio of the MBBR achieved 65% within 12 days by increasing dilute ratio of the influent wastewater with tap water. The ratio of nitrification decreased to 25% when influent COD concentration increased from 650 to 1000 mg/L after nitrification recovery and recovered 70% for another 4 days.展开更多
Nitrogen removal via nitrite （the nitrite pathway） is more suitable for carbon-limited industrial wastewater. Partial nitrification to nitrite is the primary step to achieve nitrogen removal via nitrite. The effect ...Nitrogen removal via nitrite （the nitrite pathway） is more suitable for carbon-limited industrial wastewater. Partial nitrification to nitrite is the primary step to achieve nitrogen removal via nitrite. The effect of alkalinity on nitrite accumulation in a continuous process was investigated by progressively increasing the alkalinity dosage ratio （amount of alkalinity to ammonia ratio, mol/mol）. There is a close relationship among alkalinity, pH and the state of matter present in aqueous solution. When alkalinity was insufficient （compared to the theoretical alkalinity amount）, ammonia removal efficiency increased first and then decreased at each alkalinity dosage ratio, with an abrupt removal efficiency peak. Generally, ammonia removal efficiency rose with increasing alkalinity dosage ratio. Ammonia removal efficiency reached to 88% from 23% when alkalinity addition was sufficient. Nitrite accumulation could be achieved by inhibiting nitrite oxidizing bacteria （NOB） by free ammonia （FA） in the early period and free nitrous acid in the later period of nitrification when alkalinity was not adequate. Only FA worked to inhibit the activity of NOB when alkalinity addition was sufficient.展开更多
The anaerobic ammonia oxidation(Anammox) granular sludge bed reactor was started up successfully with nitrifying granular sludge. During the operation, the nitrifying granular sludge was gradually converted into Anamm...The anaerobic ammonia oxidation(Anammox) granular sludge bed reactor was started up successfully with nitrifying granular sludge. During the operation, the nitrifying granular sludge was gradually converted into Anammox granular sludge with good settling property and high conversion activity. The Anammox reactor worked well with the shortest HRT of 2 43 h. Under the condition that HRT w as 6 39 h and influent concentration of ammonia and nitrite was 10 mmol/L, the removal of ammonia and nitrite was 97 17% and 100 00%, respectively. Corresponding volumetric total nitrogen loading rate and volumetric total nitrogen conversion rate were 100 83 mmol/(L·d) and 98 95 mmol/(L·d). The performance of Anammox reactor was efficient and stable.展开更多
The oxidative coupling of methane （OCM） to ethylene over a perovskite titanate catalyst in a fixed bed reactor was studied experimentally and numerically. The two-dimensional steady state model accounted for separat...The oxidative coupling of methane （OCM） to ethylene over a perovskite titanate catalyst in a fixed bed reactor was studied experimentally and numerically. The two-dimensional steady state model accounted for separate energy equations for the gas and solid phases coupled with an experimental kinetic model. A lumped kinetic model containing four main species CH4, O2, COx （CO2, CO）, and C2 （C2H4 and C2H6） was used with a plug flow reactor model as well. The results from the model agreed with the experimental data. The model was used to analyze the influence of temperature and feed gas composition on the conversion and selectivity of the reactor performance. The analytical results indicate that the conversion decreases, whereas, C2 selectivity increases by increasing gas hourly space velocity （GHSV） and the methane conversion also decreases by increasing the methane to oxygen ratio.展开更多
treatability of synthetic sago wastewater was investigated in a laboratory anaerobic tapered fluidized bed reactor （ATFBR） with a mesoporous granular activated carbon （GAC） as a support material. The experimental ...treatability of synthetic sago wastewater was investigated in a laboratory anaerobic tapered fluidized bed reactor （ATFBR） with a mesoporous granular activated carbon （GAC） as a support material. The experimental protocol was defined to examine the effect of the maximum organic loading rate （OLR）, hydraulic retention time （HRT）, the efficiency of the reactor and to report on its steady- state performance. The reactor was subjected to a steady-state operation over a range of OLR up to 85.44 kg COD/（m^3·d）. The COD removal efficiency was found to be 92% in the reactor while the biogas produced in the digester reached 25.38 m^3/（m^3·d） of the reactor. With the increase of OLR from 83.7 kg COD/（m^3·d）, the COD removal efficiency decreased. Also an artificial neural network （ANN） model using multilayer perceptron （MLP） has been developed for a system of two input variable and five output dependent variables. For the training of the input-output data, the experimental values obtained have been used. The output parameters predicted have been found to be much closer to the corresponding experimental ones and the model was validated for 30% of the untrained data. The mean square error （MSE） was found to be only 0.0146.展开更多
A new gas-liquid-solid circulating fluidized bed photocatalytic reactor （GLSCFBPR） with internally placed multi-layered UV lamps was developed. Micrometer Gd-TiO2 particles and commercial nanometer P25-TiO2 were cho...A new gas-liquid-solid circulating fluidized bed photocatalytic reactor （GLSCFBPR） with internally placed multi-layered UV lamps was developed. Micrometer Gd-TiO2 particles and commercial nanometer P25-TiO2 were chosen as the photocatalysts, and the hazardous substance bisphenol A （BPA） was chosen as the model pollutant to investigate the performance of this new photocatalytic system. The results showed that the photocatalytic degradation efficiency of the micrometer Gd-TiO2 particles was similar to that of the nanometer P-25 particles at their respective optimum dosage but the former could be easily separated out by gravity. After investigating the effects of process parameters on the photocatalytic BPA degradation, the response surface method （RSM） was further used for process optimization. The interactions among process parameters, i.e., TiO2 concentration, superficial gas velocity and superficial liquid velocity were discovered and a related analysis was carried out to explore the underlying mechanism. A quadratic mathematic model was established and performed satisfactorily when used for prediction. The optimum conditions for this new process were as follows： TiO2 concentration 4.5 g/L, superficial gas velocity 7.83 x 10-3 m/sec and superficial liquid velocity 8.65 x 10-3 m/sec.展开更多
In this study,the performances of fixed and fluidized bed reactors in the production of single-walled carbon nanotubes（SWNTs）have been investigated.In both reactors,single-walled carbon nanotubes were grown by catal...In this study,the performances of fixed and fluidized bed reactors in the production of single-walled carbon nanotubes（SWNTs）have been investigated.In both reactors,single-walled carbon nanotubes were grown by catalytic chemical vapor decomposition（CCVD）of methane over Co-Mo/MgO nanocatalyst under two different operating conditions.The synthesized samples were characterized by TEM,TGA and Raman spectroscopy.It is found that the performance of a fluidized bed in the synthesis of carbon nanotubes is much better than that of a fixed bed.The quality of carbon nanotubes obtained from the fluidized bed was significantly higher than that from the fixed bed and the former one with the ID/IG ratio of 0.11 while the latter one with the ID/IG ratio of 0.71.Also,the yield of SWNTs in the fluidized bed was 92 wt%,while it was 78 wt%in the fixed bed.These advantages of fluidized bed reactors for the synthesis of carbon nanotubes can be attributed to more available space for the growth of carbon nanotubes and more uniform temperature and concentration profiles.展开更多
Fluidized beds enable good solids mixing,high rates of heat and mass transfer,and large throughputs,but there remain issues related to fluidization quality and scale-up.In this work I review modification techniques fo...Fluidized beds enable good solids mixing,high rates of heat and mass transfer,and large throughputs,but there remain issues related to fluidization quality and scale-up.In this work I review modification techniques for fluidized beds from the perspective of the principles of process intensification(PI),that is,effective bubbling suppression and elutriation control.These techniques are further refined into(1)design factors,e.g.modifying the bed configuration,or the application of internal and external forces,and(2)operational factors,including altering the particle properties(e.g.size,density,surface area)and fluidizing gas properties(e.g.density,viscosity,or velocity).As far as two proposed PI principles are concerned,our review suggests that it ought to be possible to gain improvements of between 2 and 4 times over conventional fluidized bed designs by the application of these techniques.展开更多
Pyrolysis of bagasse followed by thermal cracking of tar was carded out at atmospheric pressure using a dual bed reactor. The first bed was used for the pyrolysis and the second bed was used for thermal cracking of ta...Pyrolysis of bagasse followed by thermal cracking of tar was carded out at atmospheric pressure using a dual bed reactor. The first bed was used for the pyrolysis and the second bed was used for thermal cracking of tar. Iron fillings were used as the packed bed material in the second bed. The effects of reaction time （20 to 40 rain）, reactor temperature （600 to 900 ℃） and packed bed height （40-100 mm） on the product （char, tar and gas） yield and gas （H2, CO, CO2, CH4, CnHm） composition were studied. Over the ranges of the experimental conditions used, the operating conditions were optimized for pyrolysis temperature around 850 ℃, a reaction time of 30 min and packed bed height of 100 mm, thus we could obtain a gas richer in hydrogen and carbon monoxide and poorer in carbon dioxide and hydrocarbons. It was observed that compared with single bed process, dual bed process increased the gas yield from 0.397 to 0.750 m3/kg and decreased the tar yield from 0.445 to 0.268 g/g while the heating value of the product gas remained almost constant （10-11 M J/m3）.展开更多
Catalytic decomposition of methane using a Fe-based catalyst for hydrogen production has been studied in this work. A Fe/Al2O3 catalyst previously developed by our research group has been tested in a fluidized bed rea...Catalytic decomposition of methane using a Fe-based catalyst for hydrogen production has been studied in this work. A Fe/Al2O3 catalyst previously developed by our research group has been tested in a fluidized bed reactor （FBR）. A parametric study ot the effects of some process variables, including reaction temperature and space velocity, is undertaken. The operating conditions strongly affect the catalyst performance. Methane conversion was increased by increasing the temperature and lowering the space velocity. Using temperatures between 700 and 900℃ and space velocities between 3 and 6 LN/（gcat·h）, a methane conversion in the range of 25%-40% for the gas exiting the reactor could be obtained during a 6 h run. In addition, carbon was deposited in the form of nanofilaments （chain like nanofibers and multiwall nanotubes） with similar properties to those obtained in a fixed bed reactor.展开更多
On the basis of the analysis of the process of treating low concentrations of sulfur dioxide （SO2） gas in a fixed bed reactor, a kinetic model is proposed for this process after taking into consideration the effects...On the basis of the analysis of the process of treating low concentrations of sulfur dioxide （SO2） gas in a fixed bed reactor, a kinetic model is proposed for this process after taking into consideration the effects of internal diffusion, cell concentration, and production yield of microorganisms but ignoring the effect of external diffusion. The results obtained from the model simulation show that this model can indicate the influence of the process factors, Cin, η μmax, Cx, A, h, Kin, and Q, on the removal of SO2 and that the prediction of the results by this model is also satisfactory. This kinetic model can also provide some very important indications regarding the preparation of immobilized microorganisms, selection and domestication of proper species of microorganisms, as well as the design of bioreactors.展开更多
One of the commercial means to convert heavy oil residue is hydrocracking in an ebullated bed. The ebullated bed reactor includes a complex gas–liquid–solid backmixed system which attracts the attention of many scie...One of the commercial means to convert heavy oil residue is hydrocracking in an ebullated bed. The ebullated bed reactor includes a complex gas–liquid–solid backmixed system which attracts the attention of many scientists and research groups. This work is aimed at the calculation of the internal recycle flow rate and understanding its effect on other parameters of the ebullated bed. Measured data were collected from an industrial scale residual hydrocracking unit consisting of a cascade of three ebullated bed reactors. A simplified block model of the ebullated bed reactors was created in Aspen Plus and fed with measured data. For reaction yield calculation, a lumped kinetic model was used. The model was verified by comparing experimental and calculated distillation curves as well as the calculated and measured reactor inlet temperature. Influence of the feed rate on the recycle ratio(recycle to feed flow rate) was estimated. A relation between the recycle flow rate, pump pressure difference and catalyst inventory has been identified. The recycle ratio also affects the temperature gradient along the reactor cascade. Influence of the recycle ratio on the temperature gradient decreased with the cascade member order.展开更多
A dynamic mass transfer model of isobutane/butene alkylation over solid acid catalysts in a fixed bed reactor was established. In the model, a modified equation for the relationship between point activity and effectiv...A dynamic mass transfer model of isobutane/butene alkylation over solid acid catalysts in a fixed bed reactor was established. In the model, a modified equation for the relationship between point activity and effective diffusion coefficient was proposed. It is found that the simulation results fit the experimental data well and the breakthrough time of the bed layer is predicted accurately. By modeling the alkylation process, the time-space distribution of butene and point activity profiles of catalysts can be obtained. Furthermore, the reasons for the deactivation of solid acid catalysts were investigated. It indicates that the main reason for the deactivation of catalysts is the site coverage near the inlet of the reactor, while it is ascribed to the steric effect in the region far away from the inlet.展开更多
A process of treatment for containing Cd 2+ wastewater by sulfate reducing bacteria with upflow anaerobic fluidized bed reactor has been studied. When the concentration of COD and Cd 2+ in the influent were...A process of treatment for containing Cd 2+ wastewater by sulfate reducing bacteria with upflow anaerobic fluidized bed reactor has been studied. When the concentration of COD and Cd 2+ in the influent were 270 5mg/L and 100mg/L respectively and hydraulic retention time was 4 hours, the removal rate of COD and Cd 2+ were higher than 73 8% and 99 8% respectively. The reactor can treat as high as 1000mg/L of concentration of Cd 2+ . The highest removal velocity rate of Cd 2+ reached 2999 1mg/(L·d). And the possible relationship between sulfate reducing bacteria and methanogenic bacteria was discussed.展开更多
An improved generalized predictive control algorithm is presented in thispaper by incorporating offline identification into online identification. Unlike the existinggeneralized predictive control algorithms, the prop...An improved generalized predictive control algorithm is presented in thispaper by incorporating offline identification into online identification. Unlike the existinggeneralized predictive control algorithms, the proposed approach divides parameters of a predictivemodel into the time invariant and time-varying ones, which are treated respectively by offline andonline identification algorithms. Therefore, both the reliability and accuracy of the predictivemodel are improved. Two simulation examples of control of a fixed bed reactor show that this newalgorithm is not only reliable and stable in the case of uncertainties and abnormal disturbances,but also adaptable to slow time varying processes.展开更多
A two-phase dynamic model, describing gas phase propylene polymerization in a fluidized bed reactor, was used to explore the dynamic behavior and process control of the polypropylene production rate and reactor temper...A two-phase dynamic model, describing gas phase propylene polymerization in a fluidized bed reactor, was used to explore the dynamic behavior and process control of the polypropylene production rate and reactor temperature. The open loop analysis revealed the nonlinear behavior of the polypropylene fluidized bed reactor, jus- tifying the use of an advanced control algorithm for efficient control of the process variables. In this case, a central- ized model predictive control （MPC） technique was implemented to control the polypropylene production rate and reactor temperature by manipulating the catalyst feed rate and cooling water flow rate respectively. The corre- sponding MPC controller was able to track changes in the setpoint smoothly for the reactor temperature and pro- duction rate while the setpoint tracking of the conventional proportional-integral （PI） controller was oscillatory with overshoots and obvious interaction between the reactor temperature and production rate loops. The MPC was able to produce controller moves which not only were well within the specified input constraints for both control vari- ables, but also non-aggressive and sufficiently smooth for practical implementations. Furthermore, the closed loop dynamic simulations indicated that the speed of rejecting the process disturbances for the MPC controller were also acceotable for both controlled variables.展开更多
The feasibility of struvite recovery at low （12.5 mg/L） and high （120 mg[L） phosphorus concentrations was studied by constructing a novel fluidized bed reactor with cones （FBRwc） and without cones （FBRwoc）. Th...The feasibility of struvite recovery at low （12.5 mg/L） and high （120 mg[L） phosphorus concentrations was studied by constructing a novel fluidized bed reactor with cones （FBRwc） and without cones （FBRwoc）. The crystallization process was continuously operated for 133 days under different hydraulic retention times （HRT = 1-10 hr）, pH （7.5-10）, and molar ratios of Mg/P （0.75-1.75）, N/P （1-10） and Ca/Mg （0-2）. The optimum operating conditions of HRT, pH, Mg/P and N/P molar ratios were found to be 2 hr, 9, 1.25, and 7.5, respectively. Under these optimum conditions, the phosphorus precipitation efficiencies of FBRwc were 93% for low and 98% for high phosphorus influent; however, the efficiencies were 78% and 81% for FBRwoc, respectively. Due to crystal losses at each junction （17%-31%）, the crystal recovery efficiency of FBRwoc was relatively low （47%-65%） for both influent concentrations. However, the losses were minimal in FBRwc, which showed 75% and 92% crystal recovery for low and high phosphorus concentrations, respectively. At low calcium concentration, crystal chemical analysis showed the product to be pure struvite （〉 99%）. The scanning electron microscope and X-ray diffraction results further confirmed that the crystal recovered from FBRwc contained pure struvite, which could be considered a high quality fertilizer. Except HRT, all parameters （pH, Mg/P, N/P and Ca/Mg） were found to be influencing factors for FBRwc performance. Overall, inserting cones in each part of the reactor played a significant role in enhancing struvite recovery from a wide range of phosphorus-containing wastewater.展开更多
The disposal of waste brines has become a major challenge that hinders the wide application of ion- exchange resins in the water industry in recent decades. In this study, high sulfate removal efficiency （80%-90%） w...The disposal of waste brines has become a major challenge that hinders the wide application of ion- exchange resins in the water industry in recent decades. In this study, high sulfate removal efficiency （80%-90%） was achieved at the influent sulfate concentration of 3600 mg/L and 3% NaC1 after 145 days in an expanded granular sludge bed （EGSB） reactor. Furthermore, the feasibility of treating synthetic waste brine containing high levels of sulfate and nitrate was investigated in a single EGSB reactor during an operation period of 261 days. The highest nitrate and sulfate loading rate reached 6.38 and 5.78 kg/（m3-day） at SO42--S/NO3-N mass ratio of 4/3, and the corresponding removal efficiency was 99.97% and 82.26% at 3% NaC1, respectively. Meanwhile, 454-pyrosequencing technology was used to analyze the bacterial diversity of the sludge on the 240th day for stable operation of phase X. Results showed that a total of 9194 sequences were obtained, which could be affiliated to 14 phyla, including Proteobacteria, Firmicutes, Chlorobi, Bacteroidetes, Synergistetes and so on. Proteobacteria （77.66%） was the dominant microbial population, followed by Firmicutes （12.23%） and Chlorobi （2.71%）.展开更多
Selective hydrogenation plays an important role in chemical industries,yet its selectivity is usually limited by the mass transfer.In this work,the enhanced hydrogenation selectivity was achieved in a rotating packed ...Selective hydrogenation plays an important role in chemical industries,yet its selectivity is usually limited by the mass transfer.In this work,the enhanced hydrogenation selectivity was achieved in a rotating packed bed(RPB)reactor with excellent mass transfer efficiency.Aiming to be used under the centrifugal filed,a monolithic catalyst Pd/c-Al_(2)O_(3)/nickel foam suiting for the shape and size of the rotor of RPB reactor was prepared by the electrophoretic deposition method.The mechanical strength of the catalyst can meet the requirement of high centrifugal force in the RPB.The hydrogenation selectivity in the RPB reactor using the 3-methyl-1-pentyn-3-ol hydrogenation system was 3–8 times higher than that in a stirred tank reactor under similar conditions.This work proves the feasibility of intensifying the selectivity of hydrogenation process in the RPB reactor.展开更多
基金supported by the Research Support Project for Stabilizing and Introducing Talents of Anhui Agricultural University(No.rc522010).
文摘With the burgeoning growth of aquaculture industry,high concentration of NH_(4)^(+)-N,phosphorus and tetracycline are the prevalent pollutants in aquaculturewastewater posing a significant health risk to aquatic organisms.Therefore,an effective method for treating aquaculture wastewater should be urgently explored.Simultaneous removal of NH_(4)^(+)-N,phosphorus,tetracycline,and chemical oxygen demand(COD)in aquaculture wastewater was developed bymoving bed biofilm reactor(MBBR)under co-metabolic substances.The result showed that co-metabolism substances had different effects on MBBR performance,and 79.4%of tetracycline,68.2%of NH_(4)^(+)-N,61.3%of total nitrogen,88.3%of COD,and 38.1%of total phosphorus(TP)were synchronously removed with sodium acetate as a co-metabolic carbon source.Protein(PN),polysaccharide(PS),and electron transfer system activity were used to evaluate the MBBR performances,suggesting that PN/PS ratio was 1.48,0.91,1.07,3.58,and 0.79 at phases Ⅰ-Ⅴ.Additionally,a mode of tetracycline degradation and TP removal was explored,and the cell apoptosis was evaluated by flow cytometry.The result suggested that 74%,83%,and 83%of tetracycline were degraded by extracellular extracts,intracellular extracts,and cell debris,and there was no difference between extracts and non-enzyme in TP removal.The ratio of viable and dead cells from biofilm reached 33.3%and 7.68%with sodium acetate as a co-metabolic carbon source.Furthermore,Proteobacteria and Bacteroidetes in biofilm were identified as the dominant phyla for tetracycline and nutrients removal.This study provides a new strategy for tetracycline and nutrients removal from aquaculture wastewater through co-metabolism.
基金supported by the High Technology Research and Development Program(863)of China(No.2007AA06A411)
文摘Moving bed biofilm reactor （MBBR） was used to treat real coal gasification wastewater. Nitrification of the MBBR was inhibited almost completely during start-up period. Sudden increase of influent total NH 3 concentration was the main factor inducing nitrification inhibition. Increasing DO concentration in the bulk liquid （from 2 to 3 mg/L） had little effect on nitrification recovery. Nitrification of the MBBR recovered partially by the addition of nitrifying sludge into the reactor and almost ceased within 5 days. Nitrification ratio of the MBBR achieved 65% within 12 days by increasing dilute ratio of the influent wastewater with tap water. The ratio of nitrification decreased to 25% when influent COD concentration increased from 650 to 1000 mg/L after nitrification recovery and recovered 70% for another 4 days.
基金supported by the State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No.2013DX10)the National Water Special Funds of China(No.2008ZX07207)
文摘Nitrogen removal via nitrite （the nitrite pathway） is more suitable for carbon-limited industrial wastewater. Partial nitrification to nitrite is the primary step to achieve nitrogen removal via nitrite. The effect of alkalinity on nitrite accumulation in a continuous process was investigated by progressively increasing the alkalinity dosage ratio （amount of alkalinity to ammonia ratio, mol/mol）. There is a close relationship among alkalinity, pH and the state of matter present in aqueous solution. When alkalinity was insufficient （compared to the theoretical alkalinity amount）, ammonia removal efficiency increased first and then decreased at each alkalinity dosage ratio, with an abrupt removal efficiency peak. Generally, ammonia removal efficiency rose with increasing alkalinity dosage ratio. Ammonia removal efficiency reached to 88% from 23% when alkalinity addition was sufficient. Nitrite accumulation could be achieved by inhibiting nitrite oxidizing bacteria （NOB） by free ammonia （FA） in the early period and free nitrous acid in the later period of nitrification when alkalinity was not adequate. Only FA worked to inhibit the activity of NOB when alkalinity addition was sufficient.
文摘The anaerobic ammonia oxidation(Anammox) granular sludge bed reactor was started up successfully with nitrifying granular sludge. During the operation, the nitrifying granular sludge was gradually converted into Anammox granular sludge with good settling property and high conversion activity. The Anammox reactor worked well with the shortest HRT of 2 43 h. Under the condition that HRT w as 6 39 h and influent concentration of ammonia and nitrite was 10 mmol/L, the removal of ammonia and nitrite was 97 17% and 100 00%, respectively. Corresponding volumetric total nitrogen loading rate and volumetric total nitrogen conversion rate were 100 83 mmol/(L·d) and 98 95 mmol/(L·d). The performance of Anammox reactor was efficient and stable.
文摘The oxidative coupling of methane （OCM） to ethylene over a perovskite titanate catalyst in a fixed bed reactor was studied experimentally and numerically. The two-dimensional steady state model accounted for separate energy equations for the gas and solid phases coupled with an experimental kinetic model. A lumped kinetic model containing four main species CH4, O2, COx （CO2, CO）, and C2 （C2H4 and C2H6） was used with a plug flow reactor model as well. The results from the model agreed with the experimental data. The model was used to analyze the influence of temperature and feed gas composition on the conversion and selectivity of the reactor performance. The analytical results indicate that the conversion decreases, whereas, C2 selectivity increases by increasing gas hourly space velocity （GHSV） and the methane conversion also decreases by increasing the methane to oxygen ratio.
文摘treatability of synthetic sago wastewater was investigated in a laboratory anaerobic tapered fluidized bed reactor （ATFBR） with a mesoporous granular activated carbon （GAC） as a support material. The experimental protocol was defined to examine the effect of the maximum organic loading rate （OLR）, hydraulic retention time （HRT）, the efficiency of the reactor and to report on its steady- state performance. The reactor was subjected to a steady-state operation over a range of OLR up to 85.44 kg COD/（m^3·d）. The COD removal efficiency was found to be 92% in the reactor while the biogas produced in the digester reached 25.38 m^3/（m^3·d） of the reactor. With the increase of OLR from 83.7 kg COD/（m^3·d）, the COD removal efficiency decreased. Also an artificial neural network （ANN） model using multilayer perceptron （MLP） has been developed for a system of two input variable and five output dependent variables. For the training of the input-output data, the experimental values obtained have been used. The output parameters predicted have been found to be much closer to the corresponding experimental ones and the model was validated for 30% of the untrained data. The mean square error （MSE） was found to be only 0.0146.
基金supported by a key project grant (No.CSTC2010AA7060) from Chongqing Science and Technology Committeethe key discipline construction project of "chemical engineering and technology" in Chongqing University of Technology
文摘A new gas-liquid-solid circulating fluidized bed photocatalytic reactor （GLSCFBPR） with internally placed multi-layered UV lamps was developed. Micrometer Gd-TiO2 particles and commercial nanometer P25-TiO2 were chosen as the photocatalysts, and the hazardous substance bisphenol A （BPA） was chosen as the model pollutant to investigate the performance of this new photocatalytic system. The results showed that the photocatalytic degradation efficiency of the micrometer Gd-TiO2 particles was similar to that of the nanometer P-25 particles at their respective optimum dosage but the former could be easily separated out by gravity. After investigating the effects of process parameters on the photocatalytic BPA degradation, the response surface method （RSM） was further used for process optimization. The interactions among process parameters, i.e., TiO2 concentration, superficial gas velocity and superficial liquid velocity were discovered and a related analysis was carried out to explore the underlying mechanism. A quadratic mathematic model was established and performed satisfactorily when used for prediction. The optimum conditions for this new process were as follows： TiO2 concentration 4.5 g/L, superficial gas velocity 7.83 x 10-3 m/sec and superficial liquid velocity 8.65 x 10-3 m/sec.
文摘In this study,the performances of fixed and fluidized bed reactors in the production of single-walled carbon nanotubes（SWNTs）have been investigated.In both reactors,single-walled carbon nanotubes were grown by catalytic chemical vapor decomposition（CCVD）of methane over Co-Mo/MgO nanocatalyst under two different operating conditions.The synthesized samples were characterized by TEM,TGA and Raman spectroscopy.It is found that the performance of a fluidized bed in the synthesis of carbon nanotubes is much better than that of a fixed bed.The quality of carbon nanotubes obtained from the fluidized bed was significantly higher than that from the fixed bed and the former one with the ID/IG ratio of 0.11 while the latter one with the ID/IG ratio of 0.71.Also,the yield of SWNTs in the fluidized bed was 92 wt%,while it was 78 wt%in the fixed bed.These advantages of fluidized bed reactors for the synthesis of carbon nanotubes can be attributed to more available space for the growth of carbon nanotubes and more uniform temperature and concentration profiles.
文摘Fluidized beds enable good solids mixing,high rates of heat and mass transfer,and large throughputs,but there remain issues related to fluidization quality and scale-up.In this work I review modification techniques for fluidized beds from the perspective of the principles of process intensification(PI),that is,effective bubbling suppression and elutriation control.These techniques are further refined into(1)design factors,e.g.modifying the bed configuration,or the application of internal and external forces,and(2)operational factors,including altering the particle properties(e.g.size,density,surface area)and fluidizing gas properties(e.g.density,viscosity,or velocity).As far as two proposed PI principles are concerned,our review suggests that it ought to be possible to gain improvements of between 2 and 4 times over conventional fluidized bed designs by the application of these techniques.
文摘Pyrolysis of bagasse followed by thermal cracking of tar was carded out at atmospheric pressure using a dual bed reactor. The first bed was used for the pyrolysis and the second bed was used for thermal cracking of tar. Iron fillings were used as the packed bed material in the second bed. The effects of reaction time （20 to 40 rain）, reactor temperature （600 to 900 ℃） and packed bed height （40-100 mm） on the product （char, tar and gas） yield and gas （H2, CO, CO2, CH4, CnHm） composition were studied. Over the ranges of the experimental conditions used, the operating conditions were optimized for pyrolysis temperature around 850 ℃, a reaction time of 30 min and packed bed height of 100 mm, thus we could obtain a gas richer in hydrogen and carbon monoxide and poorer in carbon dioxide and hydrocarbons. It was observed that compared with single bed process, dual bed process increased the gas yield from 0.397 to 0.750 m3/kg and decreased the tar yield from 0.445 to 0.268 g/g while the heating value of the product gas remained almost constant （10-11 M J/m3）.
基金the Spanish Science and InnovationMinistry for the financial support of Project ENE2008-06516-C03-01
文摘Catalytic decomposition of methane using a Fe-based catalyst for hydrogen production has been studied in this work. A Fe/Al2O3 catalyst previously developed by our research group has been tested in a fluidized bed reactor （FBR）. A parametric study ot the effects of some process variables, including reaction temperature and space velocity, is undertaken. The operating conditions strongly affect the catalyst performance. Methane conversion was increased by increasing the temperature and lowering the space velocity. Using temperatures between 700 and 900℃ and space velocities between 3 and 6 LN/（gcat·h）, a methane conversion in the range of 25%-40% for the gas exiting the reactor could be obtained during a 6 h run. In addition, carbon was deposited in the form of nanofilaments （chain like nanofibers and multiwall nanotubes） with similar properties to those obtained in a fixed bed reactor.
基金This project was supported by the National Natural Science Foundation of China (2003E0027M)
文摘On the basis of the analysis of the process of treating low concentrations of sulfur dioxide （SO2） gas in a fixed bed reactor, a kinetic model is proposed for this process after taking into consideration the effects of internal diffusion, cell concentration, and production yield of microorganisms but ignoring the effect of external diffusion. The results obtained from the model simulation show that this model can indicate the influence of the process factors, Cin, η μmax, Cx, A, h, Kin, and Q, on the removal of SO2 and that the prediction of the results by this model is also satisfactory. This kinetic model can also provide some very important indications regarding the preparation of immobilized microorganisms, selection and domestication of proper species of microorganisms, as well as the design of bioreactors.
基金supported by the Grant APVV-15-0148 provided by the Slovak Research and Development Agency
文摘One of the commercial means to convert heavy oil residue is hydrocracking in an ebullated bed. The ebullated bed reactor includes a complex gas–liquid–solid backmixed system which attracts the attention of many scientists and research groups. This work is aimed at the calculation of the internal recycle flow rate and understanding its effect on other parameters of the ebullated bed. Measured data were collected from an industrial scale residual hydrocracking unit consisting of a cascade of three ebullated bed reactors. A simplified block model of the ebullated bed reactors was created in Aspen Plus and fed with measured data. For reaction yield calculation, a lumped kinetic model was used. The model was verified by comparing experimental and calculated distillation curves as well as the calculated and measured reactor inlet temperature. Influence of the feed rate on the recycle ratio(recycle to feed flow rate) was estimated. A relation between the recycle flow rate, pump pressure difference and catalyst inventory has been identified. The recycle ratio also affects the temperature gradient along the reactor cascade. Influence of the recycle ratio on the temperature gradient decreased with the cascade member order.
文摘A dynamic mass transfer model of isobutane/butene alkylation over solid acid catalysts in a fixed bed reactor was established. In the model, a modified equation for the relationship between point activity and effective diffusion coefficient was proposed. It is found that the simulation results fit the experimental data well and the breakthrough time of the bed layer is predicted accurately. By modeling the alkylation process, the time-space distribution of butene and point activity profiles of catalysts can be obtained. Furthermore, the reasons for the deactivation of solid acid catalysts were investigated. It indicates that the main reason for the deactivation of catalysts is the site coverage near the inlet of the reactor, while it is ascribed to the steric effect in the region far away from the inlet.
文摘A process of treatment for containing Cd 2+ wastewater by sulfate reducing bacteria with upflow anaerobic fluidized bed reactor has been studied. When the concentration of COD and Cd 2+ in the influent were 270 5mg/L and 100mg/L respectively and hydraulic retention time was 4 hours, the removal rate of COD and Cd 2+ were higher than 73 8% and 99 8% respectively. The reactor can treat as high as 1000mg/L of concentration of Cd 2+ . The highest removal velocity rate of Cd 2+ reached 2999 1mg/(L·d). And the possible relationship between sulfate reducing bacteria and methanogenic bacteria was discussed.
基金Supported by the National Natural Science Foundation of China (No. 20206028) and the Qingdao Municipal Major Lab of Industry Information Technology.
文摘An improved generalized predictive control algorithm is presented in thispaper by incorporating offline identification into online identification. Unlike the existinggeneralized predictive control algorithms, the proposed approach divides parameters of a predictivemodel into the time invariant and time-varying ones, which are treated respectively by offline andonline identification algorithms. Therefore, both the reliability and accuracy of the predictivemodel are improved. Two simulation examples of control of a fixed bed reactor show that this newalgorithm is not only reliable and stable in the case of uncertainties and abnormal disturbances,but also adaptable to slow time varying processes.
基金Supported by the Research Grants of the Research Council of Malaya
文摘A two-phase dynamic model, describing gas phase propylene polymerization in a fluidized bed reactor, was used to explore the dynamic behavior and process control of the polypropylene production rate and reactor temperature. The open loop analysis revealed the nonlinear behavior of the polypropylene fluidized bed reactor, jus- tifying the use of an advanced control algorithm for efficient control of the process variables. In this case, a central- ized model predictive control （MPC） technique was implemented to control the polypropylene production rate and reactor temperature by manipulating the catalyst feed rate and cooling water flow rate respectively. The corre- sponding MPC controller was able to track changes in the setpoint smoothly for the reactor temperature and pro- duction rate while the setpoint tracking of the conventional proportional-integral （PI） controller was oscillatory with overshoots and obvious interaction between the reactor temperature and production rate loops. The MPC was able to produce controller moves which not only were well within the specified input constraints for both control vari- ables, but also non-aggressive and sufficiently smooth for practical implementations. Furthermore, the closed loop dynamic simulations indicated that the speed of rejecting the process disturbances for the MPC controller were also acceotable for both controlled variables.
基金supported by the Fundamental Research Funds for the Central Universities and Shanghai Shuguang Tracking Program(No.10GG12)the National Science and Technology Pillar Programthe 1st World Mem-brane Bioreactor(MBR)Centre
文摘The feasibility of struvite recovery at low （12.5 mg/L） and high （120 mg[L） phosphorus concentrations was studied by constructing a novel fluidized bed reactor with cones （FBRwc） and without cones （FBRwoc）. The crystallization process was continuously operated for 133 days under different hydraulic retention times （HRT = 1-10 hr）, pH （7.5-10）, and molar ratios of Mg/P （0.75-1.75）, N/P （1-10） and Ca/Mg （0-2）. The optimum operating conditions of HRT, pH, Mg/P and N/P molar ratios were found to be 2 hr, 9, 1.25, and 7.5, respectively. Under these optimum conditions, the phosphorus precipitation efficiencies of FBRwc were 93% for low and 98% for high phosphorus influent; however, the efficiencies were 78% and 81% for FBRwoc, respectively. Due to crystal losses at each junction （17%-31%）, the crystal recovery efficiency of FBRwoc was relatively low （47%-65%） for both influent concentrations. However, the losses were minimal in FBRwc, which showed 75% and 92% crystal recovery for low and high phosphorus concentrations, respectively. At low calcium concentration, crystal chemical analysis showed the product to be pure struvite （〉 99%）. The scanning electron microscope and X-ray diffraction results further confirmed that the crystal recovered from FBRwc contained pure struvite, which could be considered a high quality fertilizer. Except HRT, all parameters （pH, Mg/P, N/P and Ca/Mg） were found to be influencing factors for FBRwc performance. Overall, inserting cones in each part of the reactor played a significant role in enhancing struvite recovery from a wide range of phosphorus-containing wastewater.
基金supported by the National Natural Science Foundation of China(No.51178215,51378251)the Jiangsu Provincial Natural Science Foundation(No.BK2011032,BK20130575)+1 种基金the Jiangxi Provincial Natural Science Foundation(No.2010GQC0106)the State Key Laboratory of Pollution Control and Resource Reuse Foundation(No.PCRRF12006)
文摘The disposal of waste brines has become a major challenge that hinders the wide application of ion- exchange resins in the water industry in recent decades. In this study, high sulfate removal efficiency （80%-90%） was achieved at the influent sulfate concentration of 3600 mg/L and 3% NaC1 after 145 days in an expanded granular sludge bed （EGSB） reactor. Furthermore, the feasibility of treating synthetic waste brine containing high levels of sulfate and nitrate was investigated in a single EGSB reactor during an operation period of 261 days. The highest nitrate and sulfate loading rate reached 6.38 and 5.78 kg/（m3-day） at SO42--S/NO3-N mass ratio of 4/3, and the corresponding removal efficiency was 99.97% and 82.26% at 3% NaC1, respectively. Meanwhile, 454-pyrosequencing technology was used to analyze the bacterial diversity of the sludge on the 240th day for stable operation of phase X. Results showed that a total of 9194 sequences were obtained, which could be affiliated to 14 phyla, including Proteobacteria, Firmicutes, Chlorobi, Bacteroidetes, Synergistetes and so on. Proteobacteria （77.66%） was the dominant microbial population, followed by Firmicutes （12.23%） and Chlorobi （2.71%）.
基金supported by the National Natural Science Foundation of China(22022802 and 91934303).
文摘Selective hydrogenation plays an important role in chemical industries,yet its selectivity is usually limited by the mass transfer.In this work,the enhanced hydrogenation selectivity was achieved in a rotating packed bed(RPB)reactor with excellent mass transfer efficiency.Aiming to be used under the centrifugal filed,a monolithic catalyst Pd/c-Al_(2)O_(3)/nickel foam suiting for the shape and size of the rotor of RPB reactor was prepared by the electrophoretic deposition method.The mechanical strength of the catalyst can meet the requirement of high centrifugal force in the RPB.The hydrogenation selectivity in the RPB reactor using the 3-methyl-1-pentyn-3-ol hydrogenation system was 3–8 times higher than that in a stirred tank reactor under similar conditions.This work proves the feasibility of intensifying the selectivity of hydrogenation process in the RPB reactor.
