Uncertain parameters are widespread in engineering systems.This study investigates the modal analysis of a fluid-conveying pipe subjected to elastic supports with unknown-but-bound parameters.The governing equation fo...Uncertain parameters are widespread in engineering systems.This study investigates the modal analysis of a fluid-conveying pipe subjected to elastic supports with unknown-but-bound parameters.The governing equation for the elastically supported fluid-conveying pipe is transformed into ordinary differential equations using the Galerkin truncation method.The Chebyshev interval approach,integrated with the assumed mode method is then used to investigate the effects of uncertainties of support stiffness,fluid speed,and pipe length on the natural frequencies and mode shapes of the pipe.Additionally,both symmetrical and asymmetrical support stiffnesses are discussed.The accuracy and effectiveness of the Chebyshev interval approach are verified through comparison with the Monte Carlo method.The results reveal that,for the same deviation coefficient,uncertainties in symmetrical support stiffness have a greater impact on the first four natural frequencies than those of the asymmetrical one.There may be significant differences in the sensitivity of natural frequencies and mode shapes of the same order to uncertain parameters.Notably,mode shapes susceptible to uncertain parameters exhibit wider fluctuation intervals near the elastic supports,requiring more attention.展开更多
This paper puts forward a rigorous approach for a sensitivity analysis of stochastic user equilibrium with the elastic demand （SUEED） model. First, proof is given for the existence of derivatives of output variables...This paper puts forward a rigorous approach for a sensitivity analysis of stochastic user equilibrium with the elastic demand （SUEED） model. First, proof is given for the existence of derivatives of output variables with respect to the perturbation parameters for the SUEED model. Then by taking advantage of the gradient-based method for sensitivity analysis of a general nonlinear program, detailed formulae are developed for calculating the derivatives of designed variables with respect to perturbation parameters at the equilibrium state of the SUEED model. This method is not only applicable for a sensitivity analysis of the logit-type SUEED problem, but also for the probit-type SUEED problem. The application of the proposed method in a numerical example shows that the proposed method can be used to approximate the equilibrium link flow solutions for both logit-type SUEED and probit-type SUEED problems when small perturbations are introduced in the input parameters.展开更多
In this work,a computational modelling and analysis framework is developed to investigate the thermal buckling behavior of doubly-curved composite shells reinforced with graphene-origami(G-Ori)auxetic metamaterials.A ...In this work,a computational modelling and analysis framework is developed to investigate the thermal buckling behavior of doubly-curved composite shells reinforced with graphene-origami(G-Ori)auxetic metamaterials.A semi-analytical formulation based on the First-Order Shear Deformation Theory(FSDT)and the principle of virtual displacements is established,and closed-form solutions are derived via Navier’s method for simply supported boundary conditions.The G-Ori metamaterial reinforcements are treated as programmable constructs whose effective thermo-mechanical properties are obtained via micromechanical homogenization and incorporated into the shell model.A comprehensive parametric study examines the influence of folding geometry,dispersion arrangement,reinforcement weight fraction,curvature parameters,and elastic foundation support on the critical buckling temperature(CBT).The results reveal that,under optimal folding geometry and reinforcement alignment with principal stress trajectories,the CBT can increase by more than 150%.Furthermore,the combined effect of G-Ori reinforcement and elastic foundation substantially enhances thermal buckling resistance.These findings establish design guidelines for architected composite shells in applications such as aerospace thermal skins,morphing structures,and thermally-responsive systems,and illustrate the potential of auxetic graphene metamaterials for multifunctional,lightweight,and thermally robust structural components.展开更多
A flight dynamics model based on elastic blades for helicopters is developed.Modal shape analysis is used to describe the rotating elastic blades for the purpose of reducing the elastic degrees of freedom for blades.T...A flight dynamics model based on elastic blades for helicopters is developed.Modal shape analysis is used to describe the rotating elastic blades for the purpose of reducing the elastic degrees of freedom for blades.The analytical result is employed to predict the rotor forces and moments.The equilibrium equation of the flight dynamics model is then constructed for the elastic motion for blades and the rigid motion for other parts.The nonlinear equation is further simplified,and the gradient descent algorithm is adopted to implement the trim simulation.The trim analysis shows that the effect of blade elasticity on the accuracy of rotor forces and moments is apparent at high speed,and the proposed method presents good accuracy for trim performance.The timedomain response is realized by a combination of the Newmark method and the adaptive RungeKutta method.The helicopter control responses of collective pitch show that the response accuracy of the model at a yaw-and-pitch attitude is improved.Finally,the influence of blade elasticity on the helicopter dynamic response in low-altitude wind shear is investigated.An increase in blade elasticity reduces the oscillation amplitude of the yaw angle and the vertical speed by more than 70%.Compared with a rigid blade,an elastic blade reduces the vibration frequency of the angular velocity and results in a fast return of the helicopter to its stable flight.展开更多
To study the characteristics of the 5-prismatic–spherical–spherical(PSS)/universal–prismatic–universal(UPU)parallel mechanism with elastically active branched chains,the dynamics modeling and solutions of the para...To study the characteristics of the 5-prismatic–spherical–spherical(PSS)/universal–prismatic–universal(UPU)parallel mechanism with elastically active branched chains,the dynamics modeling and solutions of the parallel mechanism were investigated.First,the active branched chains and screw sliders were considered as spatial beam elements and plane beam element models,respectively,and the dynamic equations of each element model were derived using the Lagrange method.Second,the equations of the 5-PSS/UPU parallel mechanism were obtained according to the kinematic coupling relationship between the active branched chains and moving platform.Finally,based on the parallel mechanism dynamic equations,the natural frequency distribution of the 5-PSS/UPU parallel mechanism in the working space and elastic displacement of the moving platform were obtained.The results show that the natural frequency of the 5-PSS/UPU parallel mechanism under a given motion situation is greater than its operating frequency.The maximum position error is -0.096 mm in direction Y,and the maximum orientation error is -0.29°around the X-axis.The study provides important information for analyzing the dynamic performance,dynamic optimization design,and dynamic control of the 5-PSS/UPU parallel mechanism with elastically active branched chains.展开更多
An analytical solution for buckling of an eccentrically stiffened sandwich truncated conical shell is investigated. The shell consists of two functionally graded material （FGM） coating layers and a core layer which ...An analytical solution for buckling of an eccentrically stiffened sandwich truncated conical shell is investigated. The shell consists of two functionally graded material （FGM） coating layers and a core layer which are metal or ceramic subjected to an axial compressive load and an external uniform pressure. Shells are reinforced by stringers and rings, in which the material properties of shells and stiffeners are graded in the thickness direction following a general sigmoid law distribution. Two models of coated shell-stiffener arrangements are investigated. The change of the spacing between stringers in the meridional direction is taken into account. A couple set of three-variable- coefficient partial differential equations in terms of displacement components are solved by the Galerkin method. A closed-form expression for determining the buckling load is obtained. The numerical examples are presented and compared with previous works.展开更多
Using bathymetry and altimetric gravity anomalies, a 1°×9 1° lithospheric effective elastic thickness（Te） model over the Louisville Ridge and its adjacent regions is calculated using the moving window...Using bathymetry and altimetric gravity anomalies, a 1°×9 1° lithospheric effective elastic thickness（Te） model over the Louisville Ridge and its adjacent regions is calculated using the moving window admittance technique. For comparison, three bathymetry models are used： general bathymetric charts of the oceans, SIO V15.1,and BAT_VGG. The results show that BAT_VGG is more suitable for calculating T e than the other two models. T e along the Louisville Ridge was re-evaluated. The southeast of the ridge has a medium Te of 10–20 km, while Te increases dramatically seaward of the Tonga-Kermadec trench as a result of the collision of the Pacific and IndoAustralian plates.展开更多
Recently novel mechanisms with compact size and without many mechanical elements such as bearing are strongly required for medical devices such as surgical operation devices. This paper describes analysis and synthesi...Recently novel mechanisms with compact size and without many mechanical elements such as bearing are strongly required for medical devices such as surgical operation devices. This paper describes analysis and synthesis of elastic link mechanisms of a single spring beam which can be manufactured by NC coiling machines. These mechanisms are expected as disposable micro forceps. Smooth Curvature Model（SCM） with 3rd order Legendre polynomial curvature functions is applied to calculate large deformation of a curved cantilever beam by taking account of the balance between external and internal elastic forces and moments. SCM is then extended to analyze large deformation of a closed-loop curved elastic beam which is composed of multiple free curved beams. A closed-loop elastic link is divided into two free curved cantilever beams each of which is assumed as serially connected free curved cantilever beams described with SCM. The sets of coefficients of Legendre polynomials of SCM in all free curved cantilever beams are determined by taking account of the force and moment balance at connecting point where external input force is applied. The sets of coefficients of Legendre polynomials of a nonleaded closed-loop elastic link are optimized to design a link mechanism which can generate specified output motion due to input force applied at the assumed dividing point. For example, two planar micro grippers with a single pulling input force are analyzed and designed. The elastic deformation analyzed with proposed method agrees very well with that calculated with FEM. The designed micro gripper can generate the desired pinching motion. The proposed method can contribute to design compact and simple elastic mechanisms without high calculation costs.展开更多
A feasible method to improve the reliability and processing efficiency of large vibrating screen via the application of an elastic screen surface with multiple attached substructures （ESSMAS） was proposed. In the ES...A feasible method to improve the reliability and processing efficiency of large vibrating screen via the application of an elastic screen surface with multiple attached substructures （ESSMAS） was proposed. In the ESSMAS, every screen rod, with ends embedded into elastomer, is coupled to the main screen structure in a relatively flexible manner. The theoretical analysis was conducted, which consists of establishing dynamic model promoted from the fuzzy structure theory as well as calculating for the equivalent stiffness of each attached structure. According to the numerical simulation using the NEWMARK-fl integration method, this assembling pattern significantly leads to the screen surface/rod having larger vibration intensity than that of the corresponding position on screen structure, which specifically, with an averaged acceleration amplitude increasing ratio of 11.37% in theoretical analysis and 20.27% in experimental test. The experimental results, within a tolerant error, also confirm the established model and demonstrate the feasibility of ESSMAS.展开更多
A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were c...A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were coupled to the main screen structure with ends embedded into the elastomers, and the secondary robs were attached to adjacent two primary robs with elastic bands. The dynamic model of vibrating screen with NTESSMDF was established based on Lagrange's equation and the equivalent stiffnesses of the elastomer and elastic band were calculated. According to numerical simulation using the 4th order Runge-Kutta method, the vibration intensity of screen surface can be enhanced substantially with an averaged acceleration amplitude increasing ratio of 72.36%. The primary robs and secondary robs vibrate inversely in steady state, which would result in the friability of materials and avoid stoppage. The experimental results validate the dynamic characteristics with acceleration amplitude rising by62.93% on average, which demonstrates the feasibility of NTESSMDF.展开更多
Search logs in a timely and efficient manner are an important part of SRE (Site Reliability Engineer). Logs help us solve the problems during our development work. In this paper, we will introduce you a way how to bui...Search logs in a timely and efficient manner are an important part of SRE (Site Reliability Engineer). Logs help us solve the problems during our development work. In this paper, we will introduce you a way how to build an efficient logs analysis system based on kafka and Elastic Search. We hope you can learn something through the iteration of the Version and get some inspiration with your own log analysis system.展开更多
As a new type of marine structure,floating breakwater can provide suitable water area for coastal residents.In this paper,a multi-module floating breakwater with three cylinders was designed.According to the character...As a new type of marine structure,floating breakwater can provide suitable water area for coastal residents.In this paper,a multi-module floating breakwater with three cylinders was designed.According to the characteristics of each module,the elastic connector was created.The cabins with functions such as living,generating electricity and entertainment were arranged.A linear spring constrained design wave(LSCDW)method for strength analysis of floating marine structures with multi-module elastic connections was proposed.The numerical model was verified by 1:50 similarity ratio in the test tank.According to the analysis of design wave and extreme wave conditions,considering the mooring loads and environmental loads and connector loads,the overall strength of breakwater was analyzed by LSCDW method.These studies can provide new insights and theoretical guidance for the design of multi-module floating structures.展开更多
In this paper,a new M3Y-type effective nucleon–nucleon interaction,derived based on the lowest order constrained variational approach(LOCV)and termed B3Y-Fetal,has been used in DDM3Y1,BDM3Y1,BDM3Y2,and BDM3Y3 density...In this paper,a new M3Y-type effective nucleon–nucleon interaction,derived based on the lowest order constrained variational approach(LOCV)and termed B3Y-Fetal,has been used in DDM3Y1,BDM3Y1,BDM3Y2,and BDM3Y3 density-dependent versions in a heavy ion(HI)optical potential based on four types of a real folded potential and a phenomenological Woods–Saxon imaginary potential to study the elastic scattering of the^(16)O+^(16)O nuclear system within the framework of the optical model(OM)by computing the associated differential cross sections at various incident energies.The results of the folding analyses have shown the DDB3Y1-Fetal and BDB3Y1-Fetal,out of the four folded potentials,give a reasonably better description of the elastic data of the nuclear system.These best-fit folded potentials are followed,in performance,by the BDB3Y2-Fetal,with the BDB3Y3-Fetal potential coming last.This performance trend was also demonstrated by the optical potentials based on the M3Y-Reid interaction.Furthermore,the best-fit folded potentials,renormalized by a factor NRof approximately 0.9,have been shown to reproduce the energy dependence of the real optical potential for^(16)O scattering found in previous optical model analyses creditably well.In excellent agreement with previous works,they have also been identified in this work to belong to the family of deep refractive potentials because they have been able to reproduce and consistently describe the evolution of Airylike structures,at large scattering angles,observed in the^(16)O scattering data at different energies.Finally,a comparison of the performances of B3Y-Fetal and M3Y-Reid effective interactions undertaken in this work has shown impressive agreement between them.展开更多
Flow?induced vibration plays a positive role on heat transfer enhancement. Meanwhile, it is also a negative factor for fatigue strength. Satisfying the fatigue strength is the primary prerequisite for heat transfer en...Flow?induced vibration plays a positive role on heat transfer enhancement. Meanwhile, it is also a negative factor for fatigue strength. Satisfying the fatigue strength is the primary prerequisite for heat transfer enhancement. This paper numerically studied the flow?induced vibration of planar elastic tube bundle based on a two?way fluid–structure interaction(FSI) calculation. The numerical calculation involved the unsteady, three?dimensional incompressible governing equations solved with finite volume approach and the dynamic balance equation of planar elastic tube bundle solved with finite element method combined with dynamic mesh scheme. The numerical approach was verified by comparing with the published experimental results. Then the vibration trajectory, deformation and stress contour of planar elastic tube bundle were all studied. Results show that the combined movement of planar elastic tube bundle represents the agitation from inside to outside. The vibration of out?of?plane is the main vibration form with the typically sinusoidal behavior because the magnitude of displacement along the out?of?plane direction is the 100 times than the value of in?plane direction. The dangerous point locates in the innermost tube where the equivalent stress can be utilized to study the multiaxial fatigue of planar elastic tube bundle due to the alternating stress concentration. In the velocity range of 0.2-3 m/s, it is inferred that the vibration amplitude plays a role on the stress response and the stress amplitude is susceptible to the fluid velocity. This research paves a way for studying the fatigue strength of planar elastic tube bundle by flow?induced vibration.展开更多
Based on Kirchhoff plate theory and the Rayleigh-Ritz method,the model for free vibration of rectangular plate with rectangular cutouts under arbitrary elastic boundary conditions is established by using the improved ...Based on Kirchhoff plate theory and the Rayleigh-Ritz method,the model for free vibration of rectangular plate with rectangular cutouts under arbitrary elastic boundary conditions is established by using the improved Fourier series in combination with the independent coordinate coupling method(ICCM).The effect of the cutout is taken into account by subtracting the energies of the cutouts from the total energies of the whole plate.The vibration displacement function of the hole domain is based on the coordinate system of the hole domain in this method.From the continuity condition of the vibration displacement function at the cutout,the transition matrix between the two coordinate systems is constructed,and the mass and stiffness matrices are completely obtained.As a result,the calculation is simplified and the computational efficiency of the solution is improved.In this paper,numerical examples and modal experiments are presented to validate the effectiveness of the modeling methods,and parameters related to influencing factors of the rectangular plate are analyzed to study the vibration characteristics.展开更多
In this paper a new 2D-FGM material model based on Mori-Tanaka scheme and third-order transition function has been developed for a thick hollow cylinder of finite length.Elastic mechanical stress analysis is performed...In this paper a new 2D-FGM material model based on Mori-Tanaka scheme and third-order transition function has been developed for a thick hollow cylinder of finite length.Elastic mechanical stress analysis is performed by utilizing the finite element method.The corresponding material,displacement and stress distributions are evaluated for different values of nr and nz.Moreover,the effects of different material property distributions on the effective stress with respect to the metallic phase volume fraction are investigated.It is demonstrated that the increase in nr and V_m leads to a significant reduction in the effective stress.Finally,it is shown that the ceramic phase rich cylinder wall has lower maximum effective stresses of which the lowest value of effective stress has been evaluated for nr=20 and nz=5.This minimum value is about half the maximum effective stress which has been evaluated for the non-FGM cylinder case（nr=nz=0.1）.展开更多
Two-dimensional stress wares in n general incompressible elastic solid are investigated. First, baxic equations for simple wares and shock waves are presented for a general strain energy junction. Then the characteris...Two-dimensional stress wares in n general incompressible elastic solid are investigated. First, baxic equations for simple wares and shock waves are presented for a general strain energy junction. Then the characteristic ware speeds and the associated characteristic vectors are deduced. It is shown that there usually exist two simple waves and two shock wares. Finally, two examples are given for the case of plane strain deformation and antiplane strain deformation, respectively. It is proved that, in the case of plane strain deformation, the oblique reflection problem of a plane shock is not solvable in general.展开更多
The MeV proton non- Rutherford elastic backscattering (PEBS) has been used to measure a variety of low Z element- containing samples including thick SiC film, N implanted stainless steel, thin films interface (Ag on C...The MeV proton non- Rutherford elastic backscattering (PEBS) has been used to measure a variety of low Z element- containing samples including thick SiC film, N implanted stainless steel, thin films interface (Ag on Cu) and very deep (4μ m) SOI structure by high energy oxygen implantation. It is demonstrated that by using the significant enhancement of cross sections for low Z elements and selecting the proper energy region of the excitation curves both the sensitivities for detecting low Z elements and the accessible depth of the PEBS technique are remarkablely improved over the ordinary RBS method. The disadvantages of the PEBS as compared with RBS as well as high energy He elastic backscattering (HeEBS) are also discussed.展开更多
Previous work examined the effect of the attached stiffness matrix terms on stability of an elastic beam undergoing prescribed large overall motion. The aim of the present work is to extend the nonlinear formulations ...Previous work examined the effect of the attached stiffness matrix terms on stability of an elastic beam undergoing prescribed large overall motion. The aim of the present work is to extend the nonlinear formulations to an elastic beam with free large overall motion. Based on initial stress method, the nonlinear coupling equations of elastic beams are obtained with free large overall motion and the attached stiffness matrix is derived by solving sub-static formulation. The angular velocity and the tip deformation of the elastic pendulum are calculated. The analytical results show that the simulation results of the present model are tabled and coincide with the one-order approximate model. It is shown that the simulation results accord with energy conservation principle.展开更多
Elastic layers with varying dilative eigenstrains through the thickness were concerned. A general procedure was proposed for the analysis of such layers under arbitrary loads. The study is based on the state-space met...Elastic layers with varying dilative eigenstrains through the thickness were concerned. A general procedure was proposed for the analysis of such layers under arbitrary loads. The study is based on the state-space method and an asymptotic expansion technique. When the external loads are uniform, the expansion terminates after some leading terms, and an explicit representation for the mechanical field in a layer is obtained. This representation relies only on the displacement components of the mid-plane, which are governed by a set of two-dimensional differential equations similar to those in the classical plate theory. Consequently, obtaining the solution to the two-dimensional equations immediately gives the three-dimensional responses of the layer. As an illustrative example, a clamped elliptical layer under a uniformly distributed transverse load is analyzed in detail.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.12272211,12072181,and 12121002).
文摘Uncertain parameters are widespread in engineering systems.This study investigates the modal analysis of a fluid-conveying pipe subjected to elastic supports with unknown-but-bound parameters.The governing equation for the elastically supported fluid-conveying pipe is transformed into ordinary differential equations using the Galerkin truncation method.The Chebyshev interval approach,integrated with the assumed mode method is then used to investigate the effects of uncertainties of support stiffness,fluid speed,and pipe length on the natural frequencies and mode shapes of the pipe.Additionally,both symmetrical and asymmetrical support stiffnesses are discussed.The accuracy and effectiveness of the Chebyshev interval approach are verified through comparison with the Monte Carlo method.The results reveal that,for the same deviation coefficient,uncertainties in symmetrical support stiffness have a greater impact on the first four natural frequencies than those of the asymmetrical one.There may be significant differences in the sensitivity of natural frequencies and mode shapes of the same order to uncertain parameters.Notably,mode shapes susceptible to uncertain parameters exhibit wider fluctuation intervals near the elastic supports,requiring more attention.
基金The Scientific Innovation Research of College Graduates in Jiangsu Province(No.CXLX13_110)the Young Scientists Fund of National Natural Science Foundation of China(No.51408253)the Young Scientists Fund of Huaiyin Institute of Technology(No.491713328)
文摘This paper puts forward a rigorous approach for a sensitivity analysis of stochastic user equilibrium with the elastic demand （SUEED） model. First, proof is given for the existence of derivatives of output variables with respect to the perturbation parameters for the SUEED model. Then by taking advantage of the gradient-based method for sensitivity analysis of a general nonlinear program, detailed formulae are developed for calculating the derivatives of designed variables with respect to perturbation parameters at the equilibrium state of the SUEED model. This method is not only applicable for a sensitivity analysis of the logit-type SUEED problem, but also for the probit-type SUEED problem. The application of the proposed method in a numerical example shows that the proposed method can be used to approximate the equilibrium link flow solutions for both logit-type SUEED and probit-type SUEED problems when small perturbations are introduced in the input parameters.
文摘In this work,a computational modelling and analysis framework is developed to investigate the thermal buckling behavior of doubly-curved composite shells reinforced with graphene-origami(G-Ori)auxetic metamaterials.A semi-analytical formulation based on the First-Order Shear Deformation Theory(FSDT)and the principle of virtual displacements is established,and closed-form solutions are derived via Navier’s method for simply supported boundary conditions.The G-Ori metamaterial reinforcements are treated as programmable constructs whose effective thermo-mechanical properties are obtained via micromechanical homogenization and incorporated into the shell model.A comprehensive parametric study examines the influence of folding geometry,dispersion arrangement,reinforcement weight fraction,curvature parameters,and elastic foundation support on the critical buckling temperature(CBT).The results reveal that,under optimal folding geometry and reinforcement alignment with principal stress trajectories,the CBT can increase by more than 150%.Furthermore,the combined effect of G-Ori reinforcement and elastic foundation substantially enhances thermal buckling resistance.These findings establish design guidelines for architected composite shells in applications such as aerospace thermal skins,morphing structures,and thermally-responsive systems,and illustrate the potential of auxetic graphene metamaterials for multifunctional,lightweight,and thermally robust structural components.
基金co-supported by the National Natural Science Foundation of China-China(No.11302011)the Specialized Research Fund for the Doctoral Program of Higher Education-China(No.20131102120051)
文摘A flight dynamics model based on elastic blades for helicopters is developed.Modal shape analysis is used to describe the rotating elastic blades for the purpose of reducing the elastic degrees of freedom for blades.The analytical result is employed to predict the rotor forces and moments.The equilibrium equation of the flight dynamics model is then constructed for the elastic motion for blades and the rigid motion for other parts.The nonlinear equation is further simplified,and the gradient descent algorithm is adopted to implement the trim simulation.The trim analysis shows that the effect of blade elasticity on the accuracy of rotor forces and moments is apparent at high speed,and the proposed method presents good accuracy for trim performance.The timedomain response is realized by a combination of the Newmark method and the adaptive RungeKutta method.The helicopter control responses of collective pitch show that the response accuracy of the model at a yaw-and-pitch attitude is improved.Finally,the influence of blade elasticity on the helicopter dynamic response in low-altitude wind shear is investigated.An increase in blade elasticity reduces the oscillation amplitude of the yaw angle and the vertical speed by more than 70%.Compared with a rigid blade,an elastic blade reduces the vibration frequency of the angular velocity and results in a fast return of the helicopter to its stable flight.
基金Supported by Zhejiang Provincial Natural Science Foundation of China (Grant No. LR18E050003)National Natural Science Foundation of China (Grant Nos. 51975523,51905481)+1 种基金Postdoctoral Preferred Funding Project of Zhejiang Province (Grant No. zj2019019)Open Foundation of the Key Laboratory of E&M,Ministry of Education&Zhejiang Province (Grant No. EM2019120102)
文摘To study the characteristics of the 5-prismatic–spherical–spherical(PSS)/universal–prismatic–universal(UPU)parallel mechanism with elastically active branched chains,the dynamics modeling and solutions of the parallel mechanism were investigated.First,the active branched chains and screw sliders were considered as spatial beam elements and plane beam element models,respectively,and the dynamic equations of each element model were derived using the Lagrange method.Second,the equations of the 5-PSS/UPU parallel mechanism were obtained according to the kinematic coupling relationship between the active branched chains and moving platform.Finally,based on the parallel mechanism dynamic equations,the natural frequency distribution of the 5-PSS/UPU parallel mechanism in the working space and elastic displacement of the moving platform were obtained.The results show that the natural frequency of the 5-PSS/UPU parallel mechanism under a given motion situation is greater than its operating frequency.The maximum position error is -0.096 mm in direction Y,and the maximum orientation error is -0.29°around the X-axis.The study provides important information for analyzing the dynamic performance,dynamic optimization design,and dynamic control of the 5-PSS/UPU parallel mechanism with elastically active branched chains.
基金supported by the Vietnam National Foundation for Science and Technology Development(No.107.02-2015.11)
文摘An analytical solution for buckling of an eccentrically stiffened sandwich truncated conical shell is investigated. The shell consists of two functionally graded material （FGM） coating layers and a core layer which are metal or ceramic subjected to an axial compressive load and an external uniform pressure. Shells are reinforced by stringers and rings, in which the material properties of shells and stiffeners are graded in the thickness direction following a general sigmoid law distribution. Two models of coated shell-stiffener arrangements are investigated. The change of the spacing between stringers in the meridional direction is taken into account. A couple set of three-variable- coefficient partial differential equations in terms of displacement components are solved by the Galerkin method. A closed-form expression for determining the buckling load is obtained. The numerical examples are presented and compared with previous works.
基金supported financially by the Key Foundation of the Institute of Seismology,China Earthquake Administration (No. IS201506205)the National Natural Science Foundation of China (Nos. 41504017, 41204019, 41304003)
文摘Using bathymetry and altimetric gravity anomalies, a 1°×9 1° lithospheric effective elastic thickness（Te） model over the Louisville Ridge and its adjacent regions is calculated using the moving window admittance technique. For comparison, three bathymetry models are used： general bathymetric charts of the oceans, SIO V15.1,and BAT_VGG. The results show that BAT_VGG is more suitable for calculating T e than the other two models. T e along the Louisville Ridge was re-evaluated. The southeast of the ridge has a medium Te of 10–20 km, while Te increases dramatically seaward of the Tonga-Kermadec trench as a result of the collision of the Pacific and IndoAustralian plates.
文摘Recently novel mechanisms with compact size and without many mechanical elements such as bearing are strongly required for medical devices such as surgical operation devices. This paper describes analysis and synthesis of elastic link mechanisms of a single spring beam which can be manufactured by NC coiling machines. These mechanisms are expected as disposable micro forceps. Smooth Curvature Model（SCM） with 3rd order Legendre polynomial curvature functions is applied to calculate large deformation of a curved cantilever beam by taking account of the balance between external and internal elastic forces and moments. SCM is then extended to analyze large deformation of a closed-loop curved elastic beam which is composed of multiple free curved beams. A closed-loop elastic link is divided into two free curved cantilever beams each of which is assumed as serially connected free curved cantilever beams described with SCM. The sets of coefficients of Legendre polynomials of SCM in all free curved cantilever beams are determined by taking account of the force and moment balance at connecting point where external input force is applied. The sets of coefficients of Legendre polynomials of a nonleaded closed-loop elastic link are optimized to design a link mechanism which can generate specified output motion due to input force applied at the assumed dividing point. For example, two planar micro grippers with a single pulling input force are analyzed and designed. The elastic deformation analyzed with proposed method agrees very well with that calculated with FEM. The designed micro gripper can generate the desired pinching motion. The proposed method can contribute to design compact and simple elastic mechanisms without high calculation costs.
基金Projects(50574091,50774084) supported by the National Natural Science Foundation of China
文摘A feasible method to improve the reliability and processing efficiency of large vibrating screen via the application of an elastic screen surface with multiple attached substructures （ESSMAS） was proposed. In the ESSMAS, every screen rod, with ends embedded into elastomer, is coupled to the main screen structure in a relatively flexible manner. The theoretical analysis was conducted, which consists of establishing dynamic model promoted from the fuzzy structure theory as well as calculating for the equivalent stiffness of each attached structure. According to the numerical simulation using the NEWMARK-fl integration method, this assembling pattern significantly leads to the screen surface/rod having larger vibration intensity than that of the corresponding position on screen structure, which specifically, with an averaged acceleration amplitude increasing ratio of 11.37% in theoretical analysis and 20.27% in experimental test. The experimental results, within a tolerant error, also confirm the established model and demonstrate the feasibility of ESSMAS.
基金Project(51221462)supported by the National Natural Science Foundation of China for Innovative Research GroupProject(20120095110001)supported by the Doctoral Fund of Ministry of Education of China+1 种基金Project supported by the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions,ChinaProject(CXJJ201303)supported by the Innovation Foundation of Xuyi Research and Development Center of Mining Equipment and Materials,China University of Mining and Technology,China
文摘A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were coupled to the main screen structure with ends embedded into the elastomers, and the secondary robs were attached to adjacent two primary robs with elastic bands. The dynamic model of vibrating screen with NTESSMDF was established based on Lagrange's equation and the equivalent stiffnesses of the elastomer and elastic band were calculated. According to numerical simulation using the 4th order Runge-Kutta method, the vibration intensity of screen surface can be enhanced substantially with an averaged acceleration amplitude increasing ratio of 72.36%. The primary robs and secondary robs vibrate inversely in steady state, which would result in the friability of materials and avoid stoppage. The experimental results validate the dynamic characteristics with acceleration amplitude rising by62.93% on average, which demonstrates the feasibility of NTESSMDF.
文摘Search logs in a timely and efficient manner are an important part of SRE (Site Reliability Engineer). Logs help us solve the problems during our development work. In this paper, we will introduce you a way how to build an efficient logs analysis system based on kafka and Elastic Search. We hope you can learn something through the iteration of the Version and get some inspiration with your own log analysis system.
基金the National Natural Science Foundation of China(No.52071161)。
文摘As a new type of marine structure,floating breakwater can provide suitable water area for coastal residents.In this paper,a multi-module floating breakwater with three cylinders was designed.According to the characteristics of each module,the elastic connector was created.The cabins with functions such as living,generating electricity and entertainment were arranged.A linear spring constrained design wave(LSCDW)method for strength analysis of floating marine structures with multi-module elastic connections was proposed.The numerical model was verified by 1:50 similarity ratio in the test tank.According to the analysis of design wave and extreme wave conditions,considering the mooring loads and environmental loads and connector loads,the overall strength of breakwater was analyzed by LSCDW method.These studies can provide new insights and theoretical guidance for the design of multi-module floating structures.
基金Prof.Dao T.Khoa of the Institute for Nuclear Science and Technology(INST),Vietnam,is specially and gratefully acknowledged for providing helpful academic materials and excellent guidance in this work.
文摘In this paper,a new M3Y-type effective nucleon–nucleon interaction,derived based on the lowest order constrained variational approach(LOCV)and termed B3Y-Fetal,has been used in DDM3Y1,BDM3Y1,BDM3Y2,and BDM3Y3 density-dependent versions in a heavy ion(HI)optical potential based on four types of a real folded potential and a phenomenological Woods–Saxon imaginary potential to study the elastic scattering of the^(16)O+^(16)O nuclear system within the framework of the optical model(OM)by computing the associated differential cross sections at various incident energies.The results of the folding analyses have shown the DDB3Y1-Fetal and BDB3Y1-Fetal,out of the four folded potentials,give a reasonably better description of the elastic data of the nuclear system.These best-fit folded potentials are followed,in performance,by the BDB3Y2-Fetal,with the BDB3Y3-Fetal potential coming last.This performance trend was also demonstrated by the optical potentials based on the M3Y-Reid interaction.Furthermore,the best-fit folded potentials,renormalized by a factor NRof approximately 0.9,have been shown to reproduce the energy dependence of the real optical potential for^(16)O scattering found in previous optical model analyses creditably well.In excellent agreement with previous works,they have also been identified in this work to belong to the family of deep refractive potentials because they have been able to reproduce and consistently describe the evolution of Airylike structures,at large scattering angles,observed in the^(16)O scattering data at different energies.Finally,a comparison of the performances of B3Y-Fetal and M3Y-Reid effective interactions undertaken in this work has shown impressive agreement between them.
基金Supported by National Natural Science Foundation of China(Grant No.51475268)National Basic Research Program of China(973 Program,Grant No.2007CB206903)
文摘Flow?induced vibration plays a positive role on heat transfer enhancement. Meanwhile, it is also a negative factor for fatigue strength. Satisfying the fatigue strength is the primary prerequisite for heat transfer enhancement. This paper numerically studied the flow?induced vibration of planar elastic tube bundle based on a two?way fluid–structure interaction(FSI) calculation. The numerical calculation involved the unsteady, three?dimensional incompressible governing equations solved with finite volume approach and the dynamic balance equation of planar elastic tube bundle solved with finite element method combined with dynamic mesh scheme. The numerical approach was verified by comparing with the published experimental results. Then the vibration trajectory, deformation and stress contour of planar elastic tube bundle were all studied. Results show that the combined movement of planar elastic tube bundle represents the agitation from inside to outside. The vibration of out?of?plane is the main vibration form with the typically sinusoidal behavior because the magnitude of displacement along the out?of?plane direction is the 100 times than the value of in?plane direction. The dangerous point locates in the innermost tube where the equivalent stress can be utilized to study the multiaxial fatigue of planar elastic tube bundle due to the alternating stress concentration. In the velocity range of 0.2-3 m/s, it is inferred that the vibration amplitude plays a role on the stress response and the stress amplitude is susceptible to the fluid velocity. This research paves a way for studying the fatigue strength of planar elastic tube bundle by flow?induced vibration.
基金support of this work by the National Natural Science Foundation of China(No.51405096)the Fundamental Research Funds for the Central Universities(HEUCF210710).
文摘Based on Kirchhoff plate theory and the Rayleigh-Ritz method,the model for free vibration of rectangular plate with rectangular cutouts under arbitrary elastic boundary conditions is established by using the improved Fourier series in combination with the independent coordinate coupling method(ICCM).The effect of the cutout is taken into account by subtracting the energies of the cutouts from the total energies of the whole plate.The vibration displacement function of the hole domain is based on the coordinate system of the hole domain in this method.From the continuity condition of the vibration displacement function at the cutout,the transition matrix between the two coordinate systems is constructed,and the mass and stiffness matrices are completely obtained.As a result,the calculation is simplified and the computational efficiency of the solution is improved.In this paper,numerical examples and modal experiments are presented to validate the effectiveness of the modeling methods,and parameters related to influencing factors of the rectangular plate are analyzed to study the vibration characteristics.
文摘In this paper a new 2D-FGM material model based on Mori-Tanaka scheme and third-order transition function has been developed for a thick hollow cylinder of finite length.Elastic mechanical stress analysis is performed by utilizing the finite element method.The corresponding material,displacement and stress distributions are evaluated for different values of nr and nz.Moreover,the effects of different material property distributions on the effective stress with respect to the metallic phase volume fraction are investigated.It is demonstrated that the increase in nr and V_m leads to a significant reduction in the effective stress.Finally,it is shown that the ceramic phase rich cylinder wall has lower maximum effective stresses of which the lowest value of effective stress has been evaluated for nr=20 and nz=5.This minimum value is about half the maximum effective stress which has been evaluated for the non-FGM cylinder case（nr=nz=0.1）.
文摘Two-dimensional stress wares in n general incompressible elastic solid are investigated. First, baxic equations for simple wares and shock waves are presented for a general strain energy junction. Then the characteristic ware speeds and the associated characteristic vectors are deduced. It is shown that there usually exist two simple waves and two shock wares. Finally, two examples are given for the case of plane strain deformation and antiplane strain deformation, respectively. It is proved that, in the case of plane strain deformation, the oblique reflection problem of a plane shock is not solvable in general.
文摘The MeV proton non- Rutherford elastic backscattering (PEBS) has been used to measure a variety of low Z element- containing samples including thick SiC film, N implanted stainless steel, thin films interface (Ag on Cu) and very deep (4μ m) SOI structure by high energy oxygen implantation. It is demonstrated that by using the significant enhancement of cross sections for low Z elements and selecting the proper energy region of the excitation curves both the sensitivities for detecting low Z elements and the accessible depth of the PEBS technique are remarkablely improved over the ordinary RBS method. The disadvantages of the PEBS as compared with RBS as well as high energy He elastic backscattering (HeEBS) are also discussed.
基金supported by the National Natural Science Foundation of China (11132007)
文摘Previous work examined the effect of the attached stiffness matrix terms on stability of an elastic beam undergoing prescribed large overall motion. The aim of the present work is to extend the nonlinear formulations to an elastic beam with free large overall motion. Based on initial stress method, the nonlinear coupling equations of elastic beams are obtained with free large overall motion and the attached stiffness matrix is derived by solving sub-static formulation. The angular velocity and the tip deformation of the elastic pendulum are calculated. The analytical results show that the simulation results of the present model are tabled and coincide with the one-order approximate model. It is shown that the simulation results accord with energy conservation principle.
文摘Elastic layers with varying dilative eigenstrains through the thickness were concerned. A general procedure was proposed for the analysis of such layers under arbitrary loads. The study is based on the state-space method and an asymptotic expansion technique. When the external loads are uniform, the expansion terminates after some leading terms, and an explicit representation for the mechanical field in a layer is obtained. This representation relies only on the displacement components of the mid-plane, which are governed by a set of two-dimensional differential equations similar to those in the classical plate theory. Consequently, obtaining the solution to the two-dimensional equations immediately gives the three-dimensional responses of the layer. As an illustrative example, a clamped elliptical layer under a uniformly distributed transverse load is analyzed in detail.
