In electrolytic capacitorless permanent magnet synchronous motor(PMSM) drives, the DC-link voltage will fluctuate in a wide range due to the use of slim film capacitor. When the flux-weakening current is lower than-ψ...In electrolytic capacitorless permanent magnet synchronous motor(PMSM) drives, the DC-link voltage will fluctuate in a wide range due to the use of slim film capacitor. When the flux-weakening current is lower than-ψf/Ld during the high speed operation, the flux-weakening control loop will transform to a positive feedback mode, which means the reduction of flux-weakening current will lead to the acceleration of the voltage saturation, thus the whole system will be unstable. In order to solve this issue, this paper proposes a novel flux-weakening method for electrolytic capacitorless motor drives to maintain a negative feedback characteristic of the control loop during high speed operation. Based on the analysis of the instability mechanism in flux-weakening region, a quadrature voltage constrain mechanism is constructed to stabilize the system.Meanwhile, the parameters of the controller are theoretically designed for easier industrial application. The proposed algorithm is implemented on a 1.5 kW electrolytic capacitorless PMSM drive to verify the effectiveness of the flux-weakening performance.展开更多
A novel double extended state observer(DESO)based on model predictive torque control(MPTC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive system without current sensor.In general,to...A novel double extended state observer(DESO)based on model predictive torque control(MPTC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive system without current sensor.In general,to achieve high-precision control,two-phase current sensors are necessary for successful implementation of MPTC.For this purpose,two ESOs are used to estimate q-axis current and stator resistance respectively,and then based on this,d-axis current is estimated.Moreover,to reduce torque and flux ripple and to improve the performance of the torque and speed,MPTC strategy is designed.The simulation results validate the feasibility and effectiveness of the proposed scheme.展开更多
A novel double extended state observers(ESOs)-based field-oriented control(FOC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive systems without any phase current sensor.In principle,...A novel double extended state observers(ESOs)-based field-oriented control(FOC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive systems without any phase current sensor.In principle,two current sensors are essential parts of the drive system for implementation of the feedback to achieve high accuracy control.For this purpose,the double ESOs are created to provide feedback stator currents instead of actual current sensors.The first one of the double ESOs is designed to estimate the benchmark value of q-axis stator current,which is a primary premise;While the second is designed to estimate real-time stator currents of d-axis and q-axis simultaneously.The resultant double ESOs can rapidly and accurately give estimation of the actual currents of a-axis,b-axis and c-axis,and the synthesized double ESOs-based FOC strategy for PMSM drive system without any current sensors has satisfactory control performance and strong robustness.Numerical experiments validate the feasibility and effectiveness of the proposed scheme.展开更多
This paper compares the torque characteristics of single stator permanent magnet synchronous motor(PMSM)and double-stator PMSM under different split-ratios,air-gap lengths and shaft diameters by finite element method....This paper compares the torque characteristics of single stator permanent magnet synchronous motor(PMSM)and double-stator PMSM under different split-ratios,air-gap lengths and shaft diameters by finite element method.Firstly,the effects of split-ratio towards the torque characteristics of the two motor structures under different air-gap lengths are researched,the results show that the optimal split-ratios of the two motor structures do not change under different air-gap lengths,and the optimal split-ratio of the double-stator motor is greater than that of single-stator,and the torque of the double-stator motor is greater than that of single-stator motor with arbitrary split-ratio under the same air-gap length;Finally,the effects of the shaft diameter to the torque of the two motor structures are investigated,obtaining that with the increasing of shaft diameter,the electromagnetic torque of the single-stator motor is almost unchanged,however,the torque of the double-stator is gradually reduced,when the shaft diameter reached a certain extent,the electromagnetic torque of the double-stator motor is smaller than that of single-stator motor with the split ratio within a certain range,and the torque/quality ratio of the double-stator motor is smaller than that of single-stator motor with their optimal split ratio separately.展开更多
Motor drives form an essential part of the electric compressors,pumps,braking and actuation systems in the More-Electric Aircraft(MEA).In this paper,the application of Machine Learning(ML)in motor-drive design and opt...Motor drives form an essential part of the electric compressors,pumps,braking and actuation systems in the More-Electric Aircraft(MEA).In this paper,the application of Machine Learning(ML)in motor-drive design and optimization process is investigated.The general idea of using ML is to train surrogate models for the optimization.This training process is based on sample data collected from detailed simulation or experiment of motor drives.However,the Surrogate Role(SR)of ML may vary for different applications.This paper first introduces the principles of ML and then proposes two SRs(direct mapping approach and correction approach)of the ML in a motor-drive optimization process.Two different cases are given for the method comparison and validation of ML SRs.The first case is using the sample data from experiments to train the ML surrogate models.For the second case,the joint-simulation data is utilized for a multi-objective motor-drive optimization problem.It is found that both surrogate roles of ML can provide a good mapping model for the cases and in the second case,three feasible design schemes of ML are proposed and validated for the two SRs.Regarding the time consumption in optimizaiton,the proposed ML models can give one motor-drive design point up to 0.044 s while it takes more than 1.5 mins for the used simulation-based models.展开更多
基金supported in part by the Research Fund for the National Natural Science Foundation of China under Grant 52125701, 52007039, 51877054in part by the Key areas R&D Program of Guangdong Province China under Grant 2021B0101310001。
文摘In electrolytic capacitorless permanent magnet synchronous motor(PMSM) drives, the DC-link voltage will fluctuate in a wide range due to the use of slim film capacitor. When the flux-weakening current is lower than-ψf/Ld during the high speed operation, the flux-weakening control loop will transform to a positive feedback mode, which means the reduction of flux-weakening current will lead to the acceleration of the voltage saturation, thus the whole system will be unstable. In order to solve this issue, this paper proposes a novel flux-weakening method for electrolytic capacitorless motor drives to maintain a negative feedback characteristic of the control loop during high speed operation. Based on the analysis of the instability mechanism in flux-weakening region, a quadrature voltage constrain mechanism is constructed to stabilize the system.Meanwhile, the parameters of the controller are theoretically designed for easier industrial application. The proposed algorithm is implemented on a 1.5 kW electrolytic capacitorless PMSM drive to verify the effectiveness of the flux-weakening performance.
基金National Natural Science Foundation of China(No.61463025)Opening Foundation of Key Laboratory of Opto-technology and Intelligent Control(Lanzhou Jiaotong University),Ministry of Education(No.KFKT2018-8)
文摘A novel double extended state observer(DESO)based on model predictive torque control(MPTC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive system without current sensor.In general,to achieve high-precision control,two-phase current sensors are necessary for successful implementation of MPTC.For this purpose,two ESOs are used to estimate q-axis current and stator resistance respectively,and then based on this,d-axis current is estimated.Moreover,to reduce torque and flux ripple and to improve the performance of the torque and speed,MPTC strategy is designed.The simulation results validate the feasibility and effectiveness of the proposed scheme.
基金National Natural Science Foundation of China(No.61463025)Opening Foundation of Key Laboratory of Opto-technology and Intelligent Control(Lanzhou Jiaotong University),Ministry of Education(No.KFKT2018-8)Program for Excellent Team of Scientific Research in Lanzhou Jiaotong University(No.201701)
文摘A novel double extended state observers(ESOs)-based field-oriented control(FOC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive systems without any phase current sensor.In principle,two current sensors are essential parts of the drive system for implementation of the feedback to achieve high accuracy control.For this purpose,the double ESOs are created to provide feedback stator currents instead of actual current sensors.The first one of the double ESOs is designed to estimate the benchmark value of q-axis stator current,which is a primary premise;While the second is designed to estimate real-time stator currents of d-axis and q-axis simultaneously.The resultant double ESOs can rapidly and accurately give estimation of the actual currents of a-axis,b-axis and c-axis,and the synthesized double ESOs-based FOC strategy for PMSM drive system without any current sensors has satisfactory control performance and strong robustness.Numerical experiments validate the feasibility and effectiveness of the proposed scheme.
基金supported in part by the National Natural Science Foundation of China under Grant 51977011。
文摘This paper compares the torque characteristics of single stator permanent magnet synchronous motor(PMSM)and double-stator PMSM under different split-ratios,air-gap lengths and shaft diameters by finite element method.Firstly,the effects of split-ratio towards the torque characteristics of the two motor structures under different air-gap lengths are researched,the results show that the optimal split-ratios of the two motor structures do not change under different air-gap lengths,and the optimal split-ratio of the double-stator motor is greater than that of single-stator,and the torque of the double-stator motor is greater than that of single-stator motor with arbitrary split-ratio under the same air-gap length;Finally,the effects of the shaft diameter to the torque of the two motor structures are investigated,obtaining that with the increasing of shaft diameter,the electromagnetic torque of the single-stator motor is almost unchanged,however,the torque of the double-stator is gradually reduced,when the shaft diameter reached a certain extent,the electromagnetic torque of the double-stator motor is smaller than that of single-stator motor with the split ratio within a certain range,and the torque/quality ratio of the double-stator motor is smaller than that of single-stator motor with their optimal split ratio separately.
基金funding from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and Innovation Programme No.807081。
文摘Motor drives form an essential part of the electric compressors,pumps,braking and actuation systems in the More-Electric Aircraft(MEA).In this paper,the application of Machine Learning(ML)in motor-drive design and optimization process is investigated.The general idea of using ML is to train surrogate models for the optimization.This training process is based on sample data collected from detailed simulation or experiment of motor drives.However,the Surrogate Role(SR)of ML may vary for different applications.This paper first introduces the principles of ML and then proposes two SRs(direct mapping approach and correction approach)of the ML in a motor-drive optimization process.Two different cases are given for the method comparison and validation of ML SRs.The first case is using the sample data from experiments to train the ML surrogate models.For the second case,the joint-simulation data is utilized for a multi-objective motor-drive optimization problem.It is found that both surrogate roles of ML can provide a good mapping model for the cases and in the second case,three feasible design schemes of ML are proposed and validated for the two SRs.Regarding the time consumption in optimizaiton,the proposed ML models can give one motor-drive design point up to 0.044 s while it takes more than 1.5 mins for the used simulation-based models.
