In order to solve the problem of poor formability caused by different materials and properties in the process of tailor-welded sheets forming,a forming method was proposed to change the stress state of tailor-welded s...In order to solve the problem of poor formability caused by different materials and properties in the process of tailor-welded sheets forming,a forming method was proposed to change the stress state of tailor-welded sheets by covering the tailor-welded sheets with better plastic properties overlapping sheets.At the same time,the interface friction effect between the overlapping and tailor-welded sheets was utilized to control the stress magnitude and further improve the formability and quality of the tailor-welded sheets.In this work,the bulging process of the tailor-welded overlapping sheets was taken as the research object.Aluminum alloy tailor-welded overlapping sheets bulging specimens were studied by a combination of finite element analysis and experimental verification.The results show that the appropriate use of interface friction between tailor-welded and overlapping sheets can improve the formability of tailor-welded sheets and control the flow of weld seam to improve the forming quality.When increasing the interface friction coefficient on the side of tailor-welded sheets with higher strength and decreasing that on the side of tailor-welded sheets with lower strength,the deformation of the tailor-welded sheets are more uniform,the offset of the weld seam is minimal,the limit bulging height is maximal,and the forming quality is optimal.展开更多
Effectively handling imbalanced datasets remains a fundamental challenge in computational modeling and machine learning,particularly when class overlap significantly deteriorates classification performance.Traditional...Effectively handling imbalanced datasets remains a fundamental challenge in computational modeling and machine learning,particularly when class overlap significantly deteriorates classification performance.Traditional oversampling methods often generate synthetic samples without considering density variations,leading to redundant or misleading instances that exacerbate class overlap in high-density regions.To address these limitations,we propose Wasserstein Generative Adversarial Network Variational Density Estimation WGAN-VDE,a computationally efficient density-aware adversarial resampling framework that enhances minority class representation while strategically reducing class overlap.The originality of WGAN-VDE lies in its density-aware sample refinement,ensuring that synthetic samples are positioned in underrepresented regions,thereby improving class distinctiveness.By applying structured feature representation,targeted sample generation,and density-based selection mechanisms strategies,the proposed framework ensures the generation of well-separated and diverse synthetic samples,improving class separability and reducing redundancy.The experimental evaluation on 20 benchmark datasets demonstrates that this approach outperforms 11 state-of-the-art rebalancing techniques,achieving superior results in F1-score,Accuracy,G-Mean,and AUC metrics.These results establish the proposed method as an effective and robust computational approach,suitable for diverse engineering and scientific applications involving imbalanced data classification and computational modeling.展开更多
To meet the intelligent detection needs of underwater defects in large hydropower stations,the hydrodynamic performance of a bionic streamlined remotely operated vehicle containing a thruster protective net structure ...To meet the intelligent detection needs of underwater defects in large hydropower stations,the hydrodynamic performance of a bionic streamlined remotely operated vehicle containing a thruster protective net structure is numerically simulated via computational fluid dynamics and overlapping mesh technology.The results show that the entity model generates greater hydrodynamic force during steady motion,whereas the square net model experiences greater force and moment during unsteady motion.The lateral and vertical force coefficients of the entity model are 4.32 and 3.13 times greater than those of the square net model in the oblique towing test simulation.The square net model also offers better static and dynamic stability,with a 24.5%increase in dynamic stability,achieving the highest lift-to-drag ratio at attack angles of 6°∼8°.This research provides valuable insights for designing and controlling underwater defect detection vehicles for large hydropower stations.展开更多
The influences of strength coefficient K, work hardening exponent n and thickness t of the overlapping sheet on bulging process are analyzed based on hardening material model. Also, bulging experiments are carried out...The influences of strength coefficient K, work hardening exponent n and thickness t of the overlapping sheet on bulging process are analyzed based on hardening material model. Also, bulging experiments are carried out by taking the aluminum alloy LF21 as formed sheet metal, and selecting overlapping sheet with different thicknesses and material properties, by which accuracy of the above analysis result is verified in the aspects of geometric shape, thickness distribution and limit bulging height. The results show that higher strength coefficient K, larger work hardening exponent n and proper thickness of the overlapping sheet are helpful to improve the formability and forming uniformity of formed sheet metal.展开更多
In order to improve Chinese overlapping ambiguity resolution based on a support vector machine, statistical features are studied for representing the feature vectors. First, four statistical parameters-mutual informat...In order to improve Chinese overlapping ambiguity resolution based on a support vector machine, statistical features are studied for representing the feature vectors. First, four statistical parameters-mutual information, accessor variety, two-character word frequency and single-character word frequency are used to describe the feature vectors respectively. Then other parameters are tried to add as complementary features to the parameters which obtain the best results for further improving the classification performance. Experimental results show that features represented by mutual information, single-character word frequency and accessor variety can obtain an optimum result of 94. 39%. Compared with a commonly used word probability model, the accuracy has been improved by 6. 62%. Such comparative results confirm that the classification performance can be improved by feature selection and representation.展开更多
The finite element method is presented to attain the numerical simulation of the residual stresses field in the material treated by laser shock processing. The distribution of residual stresses generated by a single l...The finite element method is presented to attain the numerical simulation of the residual stresses field in the material treated by laser shock processing. The distribution of residual stresses generated by a single laser shock with square and round laser spot is predicted and validated by experimental results. With the Finite Element Method （FEM） model, effects of different overlapping rates and impact sequences on the distribution of residual stresses are simulated. The results indicate that： （1） Overlapping laser shock can increase the compressive residual stresses. However, it is not effective on the growth of plastically affected depth; （2） Overlapping rate should be optimized and selected carefully for the large area treatment. Appropriate overlapping rate is beneficial to obtain a homogeneous residual stress field; （3） The impact sequence has a great effect on the residual stress field. It can greatly attenuate the phenomenon of the “residual stress hole” to obtain a homogeneous residual stress field.展开更多
Community detection is an important methodology for understanding the intrinsic structure and function of a realworld network. In this paper, we propose an effective and efficient algorithm, called Dominant Label Prop...Community detection is an important methodology for understanding the intrinsic structure and function of a realworld network. In this paper, we propose an effective and efficient algorithm, called Dominant Label Propagation Algorithm（Abbreviated as DLPA）, to detect communities in complex networks. The algorithm simulates a special voting process to detect overlapping and non-overlapping community structure in complex networks simultaneously. Our algorithm is very efficient, since its computational complexity is almost linear to the number of edges in the network. Experimental results on both real-world and synthetic networks show that our algorithm also possesses high accuracies on detecting community structure in networks.展开更多
This work is concerned with the analysis of blood flow through inclined catheterized arteries having a balloon(angioplasty) with time-variant overlapping stenosis. The nature of blood in small arteries is analyzed mat...This work is concerned with the analysis of blood flow through inclined catheterized arteries having a balloon(angioplasty) with time-variant overlapping stenosis. The nature of blood in small arteries is analyzed mathematically by considering it as a Carreau nanofluid. The highly nonlinear momentum equations of nanofluid model are simplified by considering the mild stenosis case. The formulated problem is solved by a homotopy perturbation expansion in terms of a variant of the Weissenberg number to obtain explicit forms for the axial velocity, the stream function, the pressure gradient, the resistance impedance and the wall shear stress distribution. These solutions depend on the Brownian motion number, thermophoresis number, local temperature Grashof number G_r and local nanoparticle Grash of number B_r. The results were also studied for various values of the physical parameters, such as the Weissenberg number W_i, the power law index n, the taper angle φ, the maximum height of stenosis δ~*, the angle of inclination α, the maximum height of balloon σ~*, the axial displacement of the balloon z_d~*,the flow rate F and the Froud number Fr. The obtained results show that the transmission of axial velocity curves through a Newtonian fluid(Wi=0, n=1, Gr=0, Br=0, Nt=0, Nb≠0) is substantially lower than that through a Carreau nanofluid near the wall of balloon while the inverse occurs in the region between the balloon and stenosis. The streamlines have a clearly distinguished shifting toward the stenotic region and this shifting appears near the wall of the balloon, while it has almost disappeared near the stenotic wall and the trapping bolus in the case of horizontal arteries and Newtonian fluid(Wi=0, n=1, Gr=0, Br=0, Nt=0, Nb≠0) does not appear but for the case of Carreau nanofluid bolus appears.展开更多
The effect of overlapping treatment on microstructure of laser clad WC/Ni60A composite coating was studied with XRD, SEM, TEM and SAED etc. The results show that during the overlapping treatment the existence of the ...The effect of overlapping treatment on microstructure of laser clad WC/Ni60A composite coating was studied with XRD, SEM, TEM and SAED etc. The results show that during the overlapping treatment the existence of the residual heat and edge angle effect on the substrate has changed the composition and microstructure of the coating by raising the fusion temperature and increasing the dilution degree of the coating.展开更多
Aluminum alloy 5 A02 with low plasticity was used as target sheet, and stainless steel SUS304 with good plasticity was used as overlapping sheet to investigate the effect of interface friction on bulging formability a...Aluminum alloy 5 A02 with low plasticity was used as target sheet, and stainless steel SUS304 with good plasticity was used as overlapping sheet to investigate the effect of interface friction on bulging formability and microstructure of target sheet in overlapping sheets bulging process. Sheet sliding experiment was performed to measure interface friction coefficient of 5 A02/SUS304 in different lubricating conditions and normal pressure. Overlapping sheets bulging experiment of 5 A02/SUS304 was carried out to investigate the influence of interface friction on limit bulging height, wall thickness distribution, microstructure and fracture morphology of 5 A02 bulging specimens. The results showed that increase of the interface friction coefficient of 5 A02/SUS304 could effectively improve the limit bulging height and deformation uniformity of 5 A02. And the fracture style of 5 A02 transformed from toughness fracture of dimples-micropores gathered to fault slip separation fracture. Therefore, target sheet bulging formability is improved with the increase of interface friction coefficient.展开更多
In marine engineering,appendages such as fin stabilizers and/or T-foils are made to rotate and to reduce the motion of ships.Research on the hydrodynamics of ships fitted with active appendages has significantly impro...In marine engineering,appendages such as fin stabilizers and/or T-foils are made to rotate and to reduce the motion of ships.Research on the hydrodynamics of ships fitted with active appendages has significantly improved the design and control of such ships.However,most studies focus on fixed rather than rotating appendages,thereby ignoring the hydrodynamic unsteadiness of active appendages.To enhance the reliability and precision of the numerical simulations,we propose the use of overlapping grids for simulating advanced catamarans fitted with a pair of rotating T-foils under each bow.The fundamental purpose of the overlapping grid technique is to realize information exchange via regional overlap sharing in each subdomain of the computing domain,instead of using the method of boundary sharing,thus greatly alleviating the difficulty of generating the subdomain grid;moreover,the technique guarantees the quality of the subdomain grid.Within the main computational domain,a subdomain was allocated to accommodate the T-foil.Overlapping meshes near the interface between the two domains enable information flow during the simulation;the overlapping grids are updated at every iteration step because the subdomain rotates.The instantaneous trim and sinkage responses of the catamaran to the T-foil rotation were reproduced.From the moment the active T-foil stopped moving,there was no change in the ship’s sailing attitude,indicating that the response was in real time.By comparing with EFD data,the numerical results showed reasonable agreement,indicating the feasibility and effectiveness of the technique in simulating the hydrodynamics of ships fitted with active appendages.展开更多
When components overlap, the aircraft multiple-hit vulnerability analysis usually consists of two steps. The first is to determine the aircraft unique existent states using vulnerable area decomposition method, and th...When components overlap, the aircraft multiple-hit vulnerability analysis usually consists of two steps. The first is to determine the aircraft unique existent states using vulnerable area decomposition method, and the second is to calculate the aircraft cumulated probability of kill using Markov chain method for exact solution or Monte Carlo method for solving the combinatorial explosion problem. This article proposes a direct simulation method for calculating the aircraft multiple-hit vulnerability in order to avoid the complex vulnerable area decomposition issue. In this method, random method is adopted to produce the multiple-hit locations and Bernoulli trial is used to determine the kill or no kill of each component hit by one shot line, and kill tree is checked to determine aircraft existent states during one simulation. When the number of times of simulation is large enough, the aircraft multiple-hit vulnerability can be statistically obtained. Analysis shows that the proposed direct simulation method can provide good accuracy compared with Markov chain method and avoid the combinatorial explosion problem, and does not need the complex vulnerable area decomposition and can directly calculate the aircraft multiple-hit vulnerability. Another important finding is the binomial or Poisson simplified approach is sometimes very poor in accuracy, and should be used cautiously.展开更多
Based on the nearest surface function formula, a quantitative formula to measure the overlapping degree between the interfacial transition zone （ITZ） of neighboring aggregate particles was put forward. The formula w...Based on the nearest surface function formula, a quantitative formula to measure the overlapping degree between the interfacial transition zone （ITZ） of neighboring aggregate particles was put forward. The formula was further deduced to quantitatively analyze the influence of the volume fraction of aggregate, ITZ thickness and the maximum aggregate diameter on the overlapping degree between neighboring ITZ. The volume of ITZ was quantitatively calculated in actual concrete by comparing the nearest surface function formula with an approximate method, that is the surface area of the aggregates multiplied by the uniform thickness of the ITZ layers. The results showed that the influencing order of these three factors on the overlapping degree between neighboring ITZ in turn was the interface thickness, aggregate volume fraction and the maximum aggregate diameter; As long as the interface thickness 50 μm and the aggregate volume fraction 50%, the calculated error between two methods mentioned above is about 10 %.展开更多
Identification of nuclear pulse signal is of importance in radioactive measurements,especially in recognizing adjacent overlapping nuclear pulses.In this article,we propose an estimation method for parameters of typic...Identification of nuclear pulse signal is of importance in radioactive measurements,especially in recognizing adjacent overlapping nuclear pulses.In this article,we propose an estimation method for parameters of typical overlapping nuclear pulse signals.First,the nuclear pulses are regarded as individual genes and the norm is set as the fitness function.Second,the global optimal solution is found by searching the population of genetic algorithm,so as to estimate the parameters of nuclear pulse.With high precision,this method can identify parameters of overlapping nuclear pulses in the Sallen-Key Gaussian signal decomposition experiments.This pulse recognition method is of great significance to improve the precision of radioactive measurement and is suitable for serious overlap of nuclear pluses.展开更多
For high reliability and long life systems, system pass/fail data are often rare. Integrating lower-level data, such as data drawn from the subsystem or component pass/fail testing,the Bayesian analysis can improve th...For high reliability and long life systems, system pass/fail data are often rare. Integrating lower-level data, such as data drawn from the subsystem or component pass/fail testing,the Bayesian analysis can improve the precision of the system reliability assessment. If the multi-level pass/fail data are overlapping,one challenging problem for the Bayesian analysis is to develop a likelihood function. Since the computation burden of the existing methods makes them infeasible for multi-component systems, this paper proposes an improved Bayesian approach for the system reliability assessment in light of overlapping data. This approach includes three steps： fristly searching for feasible paths based on the binary decision diagram, then screening feasible points based on space partition and constraint decomposition, and finally simplifying the likelihood function. An example of a satellite rolling control system demonstrates the feasibility and the efficiency of the proposed approach.展开更多
The scattering of plane harmonic P and SV waves by a pair of vertically overlapping lined tunnels buried in an elastic half space is solved using a semi-analytic indirect boundary integration equation method. Then the...The scattering of plane harmonic P and SV waves by a pair of vertically overlapping lined tunnels buried in an elastic half space is solved using a semi-analytic indirect boundary integration equation method. Then the effect of the distance between the two tunnels, the stiffness and density of the lining material, and the incident frequency on the seismic response of the tunnels is investigated. Numerical results demonstrate that the dynamic interaction between the twin tunnels cannot be ignored and the lower tunnel has a significant shielding effect on the upper tunnel for high-frequency incident waves, resulting in great decrease of the dynamic hoop stress in the upper tunnel; for the low-frequency incident waves, in contrast, the lower tunnel can lead to amplification effect on the upper tunnel. It also reveals that the frequency-spectrum characteristics of dynamic stress of the lower tunnel are significantly different from those of the upper tunnel. In addition, for incident P waves in low-frequency region, the soft lining tunnels have significant amplification effect on the surface displacement amplitude, which is slightly larger than that of the corresponding single tunnel.展开更多
In this paper, we present a nonorthogonal overlapping Yee method for solv- ing Maxwell＇s equations using the diagonal split-cell model. When material interface is presented, the diagonal split-cell model does not req...In this paper, we present a nonorthogonal overlapping Yee method for solv- ing Maxwell＇s equations using the diagonal split-cell model. When material interface is presented, the diagonal split-cell model does not require permittivity averaging so that better accuracy can be achieved. Our numerical results on optical force computation show that the standard FDTD method converges linearly, while the proposed method achieves quadratic convergence and better accuracy.展开更多
There are currently many approaches to identify the community structure of a network, but relatively few specific to detect overlapping community structures. Likewise, there are few networks with ground truth overlapp...There are currently many approaches to identify the community structure of a network, but relatively few specific to detect overlapping community structures. Likewise, there are few networks with ground truth overlapping nodes. For this reason,we introduce a new network, Pilgrim, with known overlapping nodes, and a new genetic algorithm for detecting such nodes. Pilgrim is comprised of a variety of structures including two communities with dense overlap,which is common in real social structures. This study initially explores the potential of the community detection algorithm LabelRank for consistent overlap detection;however, the deterministic nature of this algorithm restricts it to very few candidate solutions. Therefore, we propose a genetic algorithm using a restricted edge-based clustering technique to detect overlapping communities by maximizing an efficient overlapping modularity function. The proposed restriction to the edge-based representation precludes the possibility of disjoint communities, thereby, dramatically reducing the search space and decreasing the number of generations required to produce an optimal solution. A tunable parameterr allows the strictness of the definition of overlap to be adjusted allowing for refinement in the number of identified overlapping nodes. Our method, tested on several real social networks, yields results comparable to the most effective overlapping community detection algorithms to date.展开更多
Detection of community structures in the complex networks is significant to understand the network structures and analyze the network properties. However, it is still a problem on how to select initial seeds as well a...Detection of community structures in the complex networks is significant to understand the network structures and analyze the network properties. However, it is still a problem on how to select initial seeds as well as to determine the number of communities. In this paper, we proposed the detecting overlapping communities based on vital nodes algorithm（DOCBVA）, an algorithm based on vital nodes and initial seeds to detect overlapping communities. First, through some screening method, we find the vital nodes and then the seed communities through the pretreatment of vital nodes. This process differs from most existing methods, and the speed is faster. Then the seeds will be extended. We also adopt a new parameter of attribution degree to extend the seeds and find the overlapping communities. Finally, the remaining nodes that have not been processed in the first two steps will be reprocessed. The number of communities is likely to change until the end of algorithm. The experimental results using some real-world network data and artificial network data are satisfactory and can prove the superiority of the DOCBVA algorithm.展开更多
基金Funded by the National Natural Science Foundation of China(Nos.52075347,51575364)and the Natural Science Foundation of Liaoning Provincial(No.2022-MS-295)。
文摘In order to solve the problem of poor formability caused by different materials and properties in the process of tailor-welded sheets forming,a forming method was proposed to change the stress state of tailor-welded sheets by covering the tailor-welded sheets with better plastic properties overlapping sheets.At the same time,the interface friction effect between the overlapping and tailor-welded sheets was utilized to control the stress magnitude and further improve the formability and quality of the tailor-welded sheets.In this work,the bulging process of the tailor-welded overlapping sheets was taken as the research object.Aluminum alloy tailor-welded overlapping sheets bulging specimens were studied by a combination of finite element analysis and experimental verification.The results show that the appropriate use of interface friction between tailor-welded and overlapping sheets can improve the formability of tailor-welded sheets and control the flow of weld seam to improve the forming quality.When increasing the interface friction coefficient on the side of tailor-welded sheets with higher strength and decreasing that on the side of tailor-welded sheets with lower strength,the deformation of the tailor-welded sheets are more uniform,the offset of the weld seam is minimal,the limit bulging height is maximal,and the forming quality is optimal.
基金supported by Ongoing Research Funding Program(ORF-2025-488)King Saud University,Riyadh,Saudi Arabia.
文摘Effectively handling imbalanced datasets remains a fundamental challenge in computational modeling and machine learning,particularly when class overlap significantly deteriorates classification performance.Traditional oversampling methods often generate synthetic samples without considering density variations,leading to redundant or misleading instances that exacerbate class overlap in high-density regions.To address these limitations,we propose Wasserstein Generative Adversarial Network Variational Density Estimation WGAN-VDE,a computationally efficient density-aware adversarial resampling framework that enhances minority class representation while strategically reducing class overlap.The originality of WGAN-VDE lies in its density-aware sample refinement,ensuring that synthetic samples are positioned in underrepresented regions,thereby improving class distinctiveness.By applying structured feature representation,targeted sample generation,and density-based selection mechanisms strategies,the proposed framework ensures the generation of well-separated and diverse synthetic samples,improving class separability and reducing redundancy.The experimental evaluation on 20 benchmark datasets demonstrates that this approach outperforms 11 state-of-the-art rebalancing techniques,achieving superior results in F1-score,Accuracy,G-Mean,and AUC metrics.These results establish the proposed method as an effective and robust computational approach,suitable for diverse engineering and scientific applications involving imbalanced data classification and computational modeling.
基金supported by the National Key R&D Program of China(Grant No.2022YFB4703401).
文摘To meet the intelligent detection needs of underwater defects in large hydropower stations,the hydrodynamic performance of a bionic streamlined remotely operated vehicle containing a thruster protective net structure is numerically simulated via computational fluid dynamics and overlapping mesh technology.The results show that the entity model generates greater hydrodynamic force during steady motion,whereas the square net model experiences greater force and moment during unsteady motion.The lateral and vertical force coefficients of the entity model are 4.32 and 3.13 times greater than those of the square net model in the oblique towing test simulation.The square net model also offers better static and dynamic stability,with a 24.5%increase in dynamic stability,achieving the highest lift-to-drag ratio at attack angles of 6°∼8°.This research provides valuable insights for designing and controlling underwater defect detection vehicles for large hydropower stations.
基金Project(51205260)supported by the National Natural Science Foundation of ChinaProject(L2012046)supported by the Liaoning Provincial Committee of Education,China
文摘The influences of strength coefficient K, work hardening exponent n and thickness t of the overlapping sheet on bulging process are analyzed based on hardening material model. Also, bulging experiments are carried out by taking the aluminum alloy LF21 as formed sheet metal, and selecting overlapping sheet with different thicknesses and material properties, by which accuracy of the above analysis result is verified in the aspects of geometric shape, thickness distribution and limit bulging height. The results show that higher strength coefficient K, larger work hardening exponent n and proper thickness of the overlapping sheet are helpful to improve the formability and forming uniformity of formed sheet metal.
文摘In order to improve Chinese overlapping ambiguity resolution based on a support vector machine, statistical features are studied for representing the feature vectors. First, four statistical parameters-mutual information, accessor variety, two-character word frequency and single-character word frequency are used to describe the feature vectors respectively. Then other parameters are tried to add as complementary features to the parameters which obtain the best results for further improving the classification performance. Experimental results show that features represented by mutual information, single-character word frequency and accessor variety can obtain an optimum result of 94. 39%. Compared with a commonly used word probability model, the accuracy has been improved by 6. 62%. Such comparative results confirm that the classification performance can be improved by feature selection and representation.
文摘The finite element method is presented to attain the numerical simulation of the residual stresses field in the material treated by laser shock processing. The distribution of residual stresses generated by a single laser shock with square and round laser spot is predicted and validated by experimental results. With the Finite Element Method （FEM） model, effects of different overlapping rates and impact sequences on the distribution of residual stresses are simulated. The results indicate that： （1） Overlapping laser shock can increase the compressive residual stresses. However, it is not effective on the growth of plastically affected depth; （2） Overlapping rate should be optimized and selected carefully for the large area treatment. Appropriate overlapping rate is beneficial to obtain a homogeneous residual stress field; （3） The impact sequence has a great effect on the residual stress field. It can greatly attenuate the phenomenon of the “residual stress hole” to obtain a homogeneous residual stress field.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61173093 and 61202182)the Postdoctoral Science Foundation of China(Grant No.2012 M521776)+2 种基金the Fundamental Research Funds for the Central Universities of Chinathe Postdoctoral Science Foundation of Shannxi Province,Chinathe Natural Science Basic Research Plan of Shaanxi Province,China(Grant Nos.2013JM8019 and 2014JQ8359)
文摘Community detection is an important methodology for understanding the intrinsic structure and function of a realworld network. In this paper, we propose an effective and efficient algorithm, called Dominant Label Propagation Algorithm（Abbreviated as DLPA）, to detect communities in complex networks. The algorithm simulates a special voting process to detect overlapping and non-overlapping community structure in complex networks simultaneously. Our algorithm is very efficient, since its computational complexity is almost linear to the number of edges in the network. Experimental results on both real-world and synthetic networks show that our algorithm also possesses high accuracies on detecting community structure in networks.
文摘This work is concerned with the analysis of blood flow through inclined catheterized arteries having a balloon(angioplasty) with time-variant overlapping stenosis. The nature of blood in small arteries is analyzed mathematically by considering it as a Carreau nanofluid. The highly nonlinear momentum equations of nanofluid model are simplified by considering the mild stenosis case. The formulated problem is solved by a homotopy perturbation expansion in terms of a variant of the Weissenberg number to obtain explicit forms for the axial velocity, the stream function, the pressure gradient, the resistance impedance and the wall shear stress distribution. These solutions depend on the Brownian motion number, thermophoresis number, local temperature Grashof number G_r and local nanoparticle Grash of number B_r. The results were also studied for various values of the physical parameters, such as the Weissenberg number W_i, the power law index n, the taper angle φ, the maximum height of stenosis δ~*, the angle of inclination α, the maximum height of balloon σ~*, the axial displacement of the balloon z_d~*,the flow rate F and the Froud number Fr. The obtained results show that the transmission of axial velocity curves through a Newtonian fluid(Wi=0, n=1, Gr=0, Br=0, Nt=0, Nb≠0) is substantially lower than that through a Carreau nanofluid near the wall of balloon while the inverse occurs in the region between the balloon and stenosis. The streamlines have a clearly distinguished shifting toward the stenotic region and this shifting appears near the wall of the balloon, while it has almost disappeared near the stenotic wall and the trapping bolus in the case of horizontal arteries and Newtonian fluid(Wi=0, n=1, Gr=0, Br=0, Nt=0, Nb≠0) does not appear but for the case of Carreau nanofluid bolus appears.
文摘The effect of overlapping treatment on microstructure of laser clad WC/Ni60A composite coating was studied with XRD, SEM, TEM and SAED etc. The results show that during the overlapping treatment the existence of the residual heat and edge angle effect on the substrate has changed the composition and microstructure of the coating by raising the fusion temperature and increasing the dilution degree of the coating.
基金Funded by the National Natural Science Foundation of China(No.51575364)the Program for Liaoning Innovation Talents in University(No.LR2017069)the Shenyang Science and Technology Innovation Support Program for Young Talented People(No.RC180189)
文摘Aluminum alloy 5 A02 with low plasticity was used as target sheet, and stainless steel SUS304 with good plasticity was used as overlapping sheet to investigate the effect of interface friction on bulging formability and microstructure of target sheet in overlapping sheets bulging process. Sheet sliding experiment was performed to measure interface friction coefficient of 5 A02/SUS304 in different lubricating conditions and normal pressure. Overlapping sheets bulging experiment of 5 A02/SUS304 was carried out to investigate the influence of interface friction on limit bulging height, wall thickness distribution, microstructure and fracture morphology of 5 A02 bulging specimens. The results showed that increase of the interface friction coefficient of 5 A02/SUS304 could effectively improve the limit bulging height and deformation uniformity of 5 A02. And the fracture style of 5 A02 transformed from toughness fracture of dimples-micropores gathered to fault slip separation fracture. Therefore, target sheet bulging formability is improved with the increase of interface friction coefficient.
基金Supported by the National Natural Science Foundation of China(Grant No.51509053)
文摘In marine engineering,appendages such as fin stabilizers and/or T-foils are made to rotate and to reduce the motion of ships.Research on the hydrodynamics of ships fitted with active appendages has significantly improved the design and control of such ships.However,most studies focus on fixed rather than rotating appendages,thereby ignoring the hydrodynamic unsteadiness of active appendages.To enhance the reliability and precision of the numerical simulations,we propose the use of overlapping grids for simulating advanced catamarans fitted with a pair of rotating T-foils under each bow.The fundamental purpose of the overlapping grid technique is to realize information exchange via regional overlap sharing in each subdomain of the computing domain,instead of using the method of boundary sharing,thus greatly alleviating the difficulty of generating the subdomain grid;moreover,the technique guarantees the quality of the subdomain grid.Within the main computational domain,a subdomain was allocated to accommodate the T-foil.Overlapping meshes near the interface between the two domains enable information flow during the simulation;the overlapping grids are updated at every iteration step because the subdomain rotates.The instantaneous trim and sinkage responses of the catamaran to the T-foil rotation were reproduced.From the moment the active T-foil stopped moving,there was no change in the ship’s sailing attitude,indicating that the response was in real time.By comparing with EFD data,the numerical results showed reasonable agreement,indicating the feasibility and effectiveness of the technique in simulating the hydrodynamics of ships fitted with active appendages.
基金Ph.D. Programs Foundation of Ministry of Education of China （200806991002） Natural Science Foundation of Shaanxi Province （SJ08A11）+2 种基金 NPU Foundation for Fundamental Research （NPU- FFR-JC200804） Young Teacher Foundation of NPU （W016208） ＂Aoxiang Star Project＂ of NPU.
文摘When components overlap, the aircraft multiple-hit vulnerability analysis usually consists of two steps. The first is to determine the aircraft unique existent states using vulnerable area decomposition method, and the second is to calculate the aircraft cumulated probability of kill using Markov chain method for exact solution or Monte Carlo method for solving the combinatorial explosion problem. This article proposes a direct simulation method for calculating the aircraft multiple-hit vulnerability in order to avoid the complex vulnerable area decomposition issue. In this method, random method is adopted to produce the multiple-hit locations and Bernoulli trial is used to determine the kill or no kill of each component hit by one shot line, and kill tree is checked to determine aircraft existent states during one simulation. When the number of times of simulation is large enough, the aircraft multiple-hit vulnerability can be statistically obtained. Analysis shows that the proposed direct simulation method can provide good accuracy compared with Markov chain method and avoid the combinatorial explosion problem, and does not need the complex vulnerable area decomposition and can directly calculate the aircraft multiple-hit vulnerability. Another important finding is the binomial or Poisson simplified approach is sometimes very poor in accuracy, and should be used cautiously.
基金Funded by the National Basic Research Program of China (No.2009CB623203)National High-tech R&D Program of China (No.2008AA030794)Postgraduates Research Innovation in University of Jiangsu Province in China (No.CX10B-064Z)
文摘Based on the nearest surface function formula, a quantitative formula to measure the overlapping degree between the interfacial transition zone （ITZ） of neighboring aggregate particles was put forward. The formula was further deduced to quantitatively analyze the influence of the volume fraction of aggregate, ITZ thickness and the maximum aggregate diameter on the overlapping degree between neighboring ITZ. The volume of ITZ was quantitatively calculated in actual concrete by comparing the nearest surface function formula with an approximate method, that is the surface area of the aggregates multiplied by the uniform thickness of the ITZ layers. The results showed that the influencing order of these three factors on the overlapping degree between neighboring ITZ in turn was the interface thickness, aggregate volume fraction and the maximum aggregate diameter; As long as the interface thickness 50 μm and the aggregate volume fraction 50%, the calculated error between two methods mentioned above is about 10 %.
基金supported by the National Natural Science Foundation of China(No.41204133)Sichuan Province Science and Technology Support Program(No.2014GZ0020)+1 种基金the Open Science Fund from Key Laboratory of Radioactive Geology and Exploration Technology Fundamental Science for National Defense,East China Institute of Technology(No.RGET1401)Scientific Research Fund of Sichuan Provincial Education Department(No.13ZA0066)
文摘Identification of nuclear pulse signal is of importance in radioactive measurements,especially in recognizing adjacent overlapping nuclear pulses.In this article,we propose an estimation method for parameters of typical overlapping nuclear pulse signals.First,the nuclear pulses are regarded as individual genes and the norm is set as the fitness function.Second,the global optimal solution is found by searching the population of genetic algorithm,so as to estimate the parameters of nuclear pulse.With high precision,this method can identify parameters of overlapping nuclear pulses in the Sallen-Key Gaussian signal decomposition experiments.This pulse recognition method is of great significance to improve the precision of radioactive measurement and is suitable for serious overlap of nuclear pluses.
基金supported by the National Natural Science Foundation of China(61304218)
文摘For high reliability and long life systems, system pass/fail data are often rare. Integrating lower-level data, such as data drawn from the subsystem or component pass/fail testing,the Bayesian analysis can improve the precision of the system reliability assessment. If the multi-level pass/fail data are overlapping,one challenging problem for the Bayesian analysis is to develop a likelihood function. Since the computation burden of the existing methods makes them infeasible for multi-component systems, this paper proposes an improved Bayesian approach for the system reliability assessment in light of overlapping data. This approach includes three steps： fristly searching for feasible paths based on the binary decision diagram, then screening feasible points based on space partition and constraint decomposition, and finally simplifying the likelihood function. An example of a satellite rolling control system demonstrates the feasibility and the efficiency of the proposed approach.
基金supported by the Tianjin Research Program of Application Foundation Advanced Technology (14JCYBJC21900)the National Natural Science Foundation of China under grants 51278327
文摘The scattering of plane harmonic P and SV waves by a pair of vertically overlapping lined tunnels buried in an elastic half space is solved using a semi-analytic indirect boundary integration equation method. Then the effect of the distance between the two tunnels, the stiffness and density of the lining material, and the incident frequency on the seismic response of the tunnels is investigated. Numerical results demonstrate that the dynamic interaction between the twin tunnels cannot be ignored and the lower tunnel has a significant shielding effect on the upper tunnel for high-frequency incident waves, resulting in great decrease of the dynamic hoop stress in the upper tunnel; for the low-frequency incident waves, in contrast, the lower tunnel can lead to amplification effect on the upper tunnel. It also reveals that the frequency-spectrum characteristics of dynamic stress of the lower tunnel are significantly different from those of the upper tunnel. In addition, for incident P waves in low-frequency region, the soft lining tunnels have significant amplification effect on the surface displacement amplitude, which is slightly larger than that of the corresponding single tunnel.
基金supported by the Air Force Office of Scientific Research (AFOSR) under Grant numbers FA9550-04-1-0213 and FA9550-07-1-0010
文摘In this paper, we present a nonorthogonal overlapping Yee method for solv- ing Maxwell＇s equations using the diagonal split-cell model. When material interface is presented, the diagonal split-cell model does not require permittivity averaging so that better accuracy can be achieved. Our numerical results on optical force computation show that the standard FDTD method converges linearly, while the proposed method achieves quadratic convergence and better accuracy.
文摘There are currently many approaches to identify the community structure of a network, but relatively few specific to detect overlapping community structures. Likewise, there are few networks with ground truth overlapping nodes. For this reason,we introduce a new network, Pilgrim, with known overlapping nodes, and a new genetic algorithm for detecting such nodes. Pilgrim is comprised of a variety of structures including two communities with dense overlap,which is common in real social structures. This study initially explores the potential of the community detection algorithm LabelRank for consistent overlap detection;however, the deterministic nature of this algorithm restricts it to very few candidate solutions. Therefore, we propose a genetic algorithm using a restricted edge-based clustering technique to detect overlapping communities by maximizing an efficient overlapping modularity function. The proposed restriction to the edge-based representation precludes the possibility of disjoint communities, thereby, dramatically reducing the search space and decreasing the number of generations required to produce an optimal solution. A tunable parameterr allows the strictness of the definition of overlap to be adjusted allowing for refinement in the number of identified overlapping nodes. Our method, tested on several real social networks, yields results comparable to the most effective overlapping community detection algorithms to date.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61672124,61370145,61173183,and 61503375)the Password Theory Project of the 13th Five-Year Plan National Cryptography Development Fund,China(Grant No.MMJJ20170203)
文摘Detection of community structures in the complex networks is significant to understand the network structures and analyze the network properties. However, it is still a problem on how to select initial seeds as well as to determine the number of communities. In this paper, we proposed the detecting overlapping communities based on vital nodes algorithm（DOCBVA）, an algorithm based on vital nodes and initial seeds to detect overlapping communities. First, through some screening method, we find the vital nodes and then the seed communities through the pretreatment of vital nodes. This process differs from most existing methods, and the speed is faster. Then the seeds will be extended. We also adopt a new parameter of attribution degree to extend the seeds and find the overlapping communities. Finally, the remaining nodes that have not been processed in the first two steps will be reprocessed. The number of communities is likely to change until the end of algorithm. The experimental results using some real-world network data and artificial network data are satisfactory and can prove the superiority of the DOCBVA algorithm.
