Shock waves in the nozzle during supersonic separation under different conditions can disrupt the flow field’s thermodynamic equilibrium.While it contributes to the recovery of pressure energy,it also leads to the di...Shock waves in the nozzle during supersonic separation under different conditions can disrupt the flow field’s thermodynamic equilibrium.While it contributes to the recovery of pressure energy,it also leads to the dissipation of mechanical energy.This study aimed to investigate the effects of changes in back pressure on the shock wave position and its subsequent impact on the refrigeration performance of nozzles.A mathematical model for the supersonic gas in a nozzle was established and evaluated via experiments.The results show that when the back pressure is less than 0.2 MPa,no shock wave is generated in the nozzle,and high refrigeration and liquefaction efficiency can be ensured while effective pressure recovery is achieved.When the back pressure(pb)is increased from 0.3 to 0.6 MPa,the refrigeration efficiency of the nozzle decreases,and the shock wave position(x shock)is advanced from 157 to 118 mm.The maximum Mach number(Ma)that can be reached by the fluid in the nozzle is reduced from 1.97 to 1.27.When the back pressure is increased from 0.2 to 0.6 MPa,the minimum temperature is increased by 55.18 K.When the back pressure is greater than 0.3 MPa,the Mach number upstream of the shock wave is reduced from 1.97 to 1.27,the shock wave intensity is weakened,and the thickness of the boundary layer separation caused by the shock wave is also decreased accordingly.Therefore,to ensure refrigeration efficiency,measures should be taken to control the back pressure within a reasonable range.展开更多
We propose an optimization method based on evolutionary computation for the design of broadband high-efficiency current-biased reverse load-modulation power amplifiers(CB-RLM PAs).First,given the reverse load-modulati...We propose an optimization method based on evolutionary computation for the design of broadband high-efficiency current-biased reverse load-modulation power amplifiers(CB-RLM PAs).First,given the reverse load-modulation characteristics of CB-RLM PAs,a comprehensive objective function is proposed that combines multi-state impedance trajectory constraints with in-band performance deviations.For the saturation and 6 dB power back-off(PBO)states,approximately optimal impedance regions on the Smith chart are derived using impedance constraint circles based on load-pull simulations.These regions are used together with in-band performance deviations(e.g.,saturated efficiency,6 dB PBO efficiency,and saturated output power)for matching network optimization and design.Second,a multi-objective evolutionary algorithm based on decomposition with adaptive weights,neighborhood,and global replacement is integrated with harmonic balance simulations to optimize design parameters and evaluate performance.Finally,to validate the proposed method,a broadband CB-RLM PA operating from 0.6 to 1.8 GHz is designed and fabricated.Measurement results show that the efficiencies at saturation,6 dB PBO,and 8 dB PBO all exceed 43.6%,with saturated output power being maintained at 40.9–41.5 dBm,which confirms the feasibility and effectiveness of the proposed broadband high-efficiency CB-RLM PA optimization and design approach.展开更多
Evaluating the effectivenes s of forest restoration projects is crucial for designing adaptive restoration strategies.However,existing studies have primarily focused on ecological outcomes while overlooking cost input...Evaluating the effectivenes s of forest restoration projects is crucial for designing adaptive restoration strategies.However,existing studies have primarily focused on ecological outcomes while overlooking cost inputs.This gap can lead to increased uncertainties in restoration planning.Here we investigated forest dynamics in China's Upper Yangtze River Basin(UYRB)using kernel Normalized Difference Vegetation Index(kNDVI),Leaf Area Index(LAI),Gross Primary Productivity(GPP),Ku-band Vegetation Optical Depth(Ku-VOD)time series and climate data from1982 to 2020.Subsequently,we employed a residual trend analysis integrating temporal effects to determine the relative contributions of climate change and human activities to forest dynamics before and after the implementation of forest restoration engineering in 1998.Additionally,we developed an Afforestation Efficiency Index(AEI)to quantitatively assess the cost efficiency of afforestation projects.Results indicated that forest in the UYRB showed sustained increases during 1982-2020,with most areas experiencing greater growth after 1998 than before.Temporal effects of climatic factors influenced over 42.7%of the forest,and incorporating time-lag and cumulative effects enhanced climate-based explanations of forest variations by 1.61-24.73%.Human activities emerged as the dominant driver of forest dynamics post 1998,whereas climate variables predominated before this period.The cost-effectiveness of forest restoration projects in the UYRB typically ranges from moderate to high,with higher success predominantly observed in the northeastern and eastern counties,while the central,western,and northwestern counties mainly showed relatively low efficiency.These findings stress the need for assessing forest restoration outcomes from both ecological and cost perspectives,and can offer valuable insights for optimizing the layout of forest restoration initiatives in the UYRB.展开更多
The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measu...The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.展开更多
Towards the development of highly efficient electrochromic coatings,the crystallinity,morphology(e.g.size and shape)of electrochromic nanomaterials,and their charge insertion capacities play a significant role.Herein,...Towards the development of highly efficient electrochromic coatings,the crystallinity,morphology(e.g.size and shape)of electrochromic nanomaterials,and their charge insertion capacities play a significant role.Herein,we report the structure-dependent colouration effciency in electrochromic coatings based on the use of 0D,1D and 2D tungsten trioxide(WO_(3))nanostructures.A series of WO_(3)with different nanostructures were prepared and used as working electrodes to fabricate electrochromic devices for smart windows applications.Facile spray coating was applied on fluorine-doped tin oxide(FTO)substrate to make~70%transparent working electrodes to investigate their charge insertion capacities,electrochromic active surface area,and colouration efficiency.Results showed that the 2D WO_(3)nanoflakes displayed the highest diffusion coefficient for the intercalation of 1.52×10^(-10)cm^(2)/s with an increased electrochemical active surface area of 25.10 mF/cm^(2),a large modulation of optical reflectance(42.63%)with 3.79 s shorter response time for bleaching and a greater colouration efficiency(CE)value(89.29 cm^(2)/C)at 700 nm compared to the CE value for 1D WO_(3)(of 22 cm^(2)/C)and 0D WO_(3)(8 cm^(2)/C).The outcome of this study provides a new insight and valuable contribution to design an efficient electrochromic coating by controlling and optimising the nanostructures of selective electrochromic materials.展开更多
A nonfused ring electron acceptor(NFREA),designated as TT-Ph-C6,has been synthesized with the aim of enhancing the power conversion efficiency(PCE)of organic solar cells(OSCs).By integrating asymmetric phenylalkylamin...A nonfused ring electron acceptor(NFREA),designated as TT-Ph-C6,has been synthesized with the aim of enhancing the power conversion efficiency(PCE)of organic solar cells(OSCs).By integrating asymmetric phenylalkylamino side groups,TT-Ph-C6 demonstrates excellent solubility and its crystal structure exhibits compact packing structures with a three-dimensional molecular stacking network.These structural attributes markedly promote exciton diffusion and charge carrier mobility,particularly advantageous for the fabrication of thick-film devices.TT-Ph-C6-based devices have attained a PCE of 18.01%at a film thickness of 100 nm,and even at a film thickness of 300 nm,the PCE remains at 14.64%,surpassing that of devices based on 2BTh-2F.These remarkable properties position TT-Ph-C6 as a highly promising NFREA material for boosting the efficiency of OSCs.展开更多
UAV-mounted intelligent reflecting surface(IRS)helps address the line-of-sight(LoS)blockage between sensor nodes(SNs)and the fusion center(FC)in Internet of Things(IoT).This paper considers an IoT assisted by multiple...UAV-mounted intelligent reflecting surface(IRS)helps address the line-of-sight(LoS)blockage between sensor nodes(SNs)and the fusion center(FC)in Internet of Things(IoT).This paper considers an IoT assisted by multiple UAVs-mounted IRS(U-IRS),where the data from ground SNs are transmitted to the FC.In practice,energy efficiency(EE)and mission completion time are crucial metrics for evaluating system performance and operational costs.Recognizing their importance during data collection,we formulate a multi-objective optimization problem to maximize EE and minimize total mission completion time simultaneously.To characterize this tradeoff while considering optimization objective consistency,we construct an optimization problem that minimizes the weighted sum of the total mission completion time and the reciprocal of EE.Due to the non-convex nature of the formulated problem,obtaining optimal solutions is generally challenging.To tackle this issue,we decompose it into three subproblems:UAV-SN association,number of reflecting elements allocation,andUAVtrajectory optimization.An iterative algorithmcombining genetic algorithm,CS-BJ algorithm,and successive convex approximation technique is proposed to solve these sub-problems.Simulation results demonstrate that when the transmitted data amount is 10 and 30Mbits,compared to the static collection benchmark(the UAV hovers directly above each SN),the EE of the proposed method improves by more than 10.4% and 5.2%,while the total mission completion time is reduced by more than 5.4% and 3.3%,respectively.展开更多
Human-modified landscapes serve as ecological filters,determining species distributions and persistence.Energy-efficient technologies,while crucial for climate change mitigation,represent novel filters whose impacts o...Human-modified landscapes serve as ecological filters,determining species distributions and persistence.Energy-efficient technologies,while crucial for climate change mitigation,represent novel filters whose impacts on synanthropic biodiversity are poorly understood.We investigated how attached sunspaces,a widely adopted energy-saving technology in rural China,filter the distribution of two ecologically important aerial insectivores,the Barn Swallow(Hirundo rustica)and Red-rumped Swallow(Cecropis daurica).We surveyed 106 villages during the 2024 and 2025 breeding seasons and recorded a total of 2323 nests(612 Barn Swallow,1711 Red-rumped Swallow).Using Generalized Linear Models,we assessed their responses to building characteristics,landscape composition and the prevalence of sunspaces.Barn Swallow nests preferred perches at the base and single attachment faces,while Red-rumped Swallow nests favored multiple attachment faces and avoided long shelters.The proportion of buildings with sunspaces acted as a strong positive filter for Barn Swallow nest abundance(+24%)but as a significant negative filter for Red-rumped Swallow(-51%).Other landscape variables(e.g.,human population density,NDVI,Human Footprint Index)were not significant.This study demonstrates that specific architectural innovations can act as powerful ecological filters,leading to divergent distributional outcomes for sympatric species reliant on anthropogenic structures.Our findings reveal a critical trade-off in sustainable development:energy efficiency gains may inadvertently reduce habitat suitability for certain species.To reconcile climate and biodiversity goals in rural landscapes,we advocate integrating species-specific habitat requirements into building design.We propose actionable modifications to sunspaces to support swallows without compromising energy savings.These principles provide a template for mitigating the distributional impacts of green infrastructure globally.展开更多
We here report a high system detection efficiency(SDE)superconducting single-photon detector(SSPD)at 2μm wavelength.The device integrates a SiO_(2)/Ta_(2)O_(5)distributed Bragg reflector(DBR)and a sandwich-structured...We here report a high system detection efficiency(SDE)superconducting single-photon detector(SSPD)at 2μm wavelength.The device integrates a SiO_(2)/Ta_(2)O_(5)distributed Bragg reflector(DBR)and a sandwich-structured double-layer NbN nanowire to enhance the optical absorption efficiency.A cold development technique is implemented to optimize the superconducting nanowires with sub-40-nm linewidths,thus enhancing the intrinsic detection efficiency(IDE).The fabricated SSPD shows an SDE exceeding 90% at 2μm wavelength.Moreover,the detector allows an operational working temperature of 2.2 K provided by a compact GM cryo-cooler.This detector delivers excellent performance at the 2μm wavelength,and its optimized structural design implies promising potential for extending detection toward longer infrared bands.It thus holds value for advancing high-sensitivity quantum technologies,mid-infrared optical communications,and dark matter detection research.展开更多
Hard carbon is a vital anode material for sodium-ion batteries;however,the nonuniform growth of solid electrolyte interphase(SEI)film substantially diminishes its initial coulombic efficiency(ICE)and cycle life.The ch...Hard carbon is a vital anode material for sodium-ion batteries;however,the nonuniform growth of solid electrolyte interphase(SEI)film substantially diminishes its initial coulombic efficiency(ICE)and cycle life.The chemical and morphological properties of surface highly influence the electrode/electrolyte interfacial reactions.In this study,we have tuned orbital hybridization states forming an interface enriched with sp^(2) hybridized carbon(sp^(2)-C),which decreases the binding energy to solvent molecules and inhibits excessive solvent decomposition during SEI formation.Benefiting from successfully constructed inorganic-rich SEI,the ICE increased to 91%and sodium storage capacity reached 346 mAh/g.Besides,the capacity retention rate was 90.7%after 700 cycles at 1 A/g higher than pristine electrode(83.8%).展开更多
Managing massive data flows effectively and resolving spectrum shortages are two challenges that smart grid communication networks(SGCN)must overcome.To address these problems,we provide a combined optimization approa...Managing massive data flows effectively and resolving spectrum shortages are two challenges that smart grid communication networks(SGCN)must overcome.To address these problems,we provide a combined optimization approach that makes use of cognitive radio(CR)and non-orthogonal multiple access(NOMA)technologies.Our work focuses on using user pairing(UP)and power allocation(PA)techniques to maximize energy efficiency(EE)in SGCN,particularly within neighbourhood area networks(NANs).We develop a joint optimization problem that takes into account the real-world limitations of a CR-NOMA setting.This problem is NP-hard,nonlinear,and nonconvex by nature.To address the computational complexity of the problem,we use the block coordinate descent(BCD)method,which breaks the problem into UP and PA subproblems.Initially,we proposed the zebra-optimization user pairing(ZOUP)algorithm to tackle the UP problem,which outperforms both orthogonal multiple access(OMA)and non-optimized NOMA(UPWO)by 78.8%and13.6%,respectively,at a SNR of 15 dB.Based on the ZOUP pairs,we subsequently proposed the PA approach,i.e.,ZOUPPA,which significantly outperforms UPWO and ZOUP by 53.2%and 25.4%,respectively,at an SNR of 15 dB.A detailed analysis of key parameters,including varying SNRs,power allocation constants,path loss exponents,user density,channel availability,and coverage radius,underscores the superiority of our approach.By facilitating the effective use of communication resources in SGCN,our research opens the door to more intelligent and energy-efficient grid systems.Our work tackles important issues in SGCN and lays the groundwork for future developments in smart grid communication technologies by combining modern optimization approaches with CR-NOMA.展开更多
A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescenc...A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescence(TADF)properties.All calculations were performed using density functional theory(DFT)and time‑dependent density functional theory(TDDFT).Calculations for electronic structures,frontier molecular orbital characteristics(which determine the efficiency roll‑off effect of the complexes),and photophysical properties were conducted using the Gaussian 09 software package.The calculation of spin‑orbit coupling matrix elements<T|HSOC|S>,which determine the TADF properties of the complexes,was performed using the ORCA software package.The calculation results show that the auxiliary ligand tetraphenylimidodiphosphinate(tpip),a strong electron‑withdrawing group,can mitigate the efficiency roll‑off effect of the complex.Furthermore,TADF is observed in one of the designed complexes,(F_(3)Phppy)_(2)Ir(tpip),where F_(3)Phppy=2‑[4‑(2,4,6‑trifluorophenyl)phenyl]pyridine.展开更多
Coordinating light and nitrogen(N)distribution within a canopy is essential for improving rice yield and resource use efficiency.However,limited research has examined light and N distribution in response to planting d...Coordinating light and nitrogen(N)distribution within a canopy is essential for improving rice yield and resource use efficiency.However,limited research has examined light and N distribution in response to planting density and N rate,and their relationships with grain yield,radiation use efficiency(RUE),and N use efficiency for grain production(NUEg)in rice.A two-year field experiment was conducted with two hybrid varieties under three N levels,0 kg ha^(-1)(N1),90 kg ha^(-1)(N2)and 180 kg ha^(-1)(N3),and two planting densities,22.2 hills m-2(D1)and 33.3 hills m^(-2)(D2).Results showed 3.4%higher yield and 4.4%higher NUEg under N2D2 compared with N3D1.The extinction coefficient for N(K_(N))and light(K_(L))and their ratio(K_(N)/K_(L))at heading stage were significantly influenced by N rate,planting density,and their interaction.K_(N)decreased with the increase of N input or planting density.Compared to N1,K_(N)decreased by 43.5 and 58.8%under N2 and N3,respectively,while K_(N)under D2 decreased by 16.0%compared to D1.Higher K_(L)and K_(N)/K_(L)values occurred under low N rates,with opposite trends under high N rates.Increased planting density led to decreased K_(L)and K_(N)/K_(L)values.N2D2 demonstrated higher K_(L)and K_(N),and thus comparable K_(N)/K_(L),compared to N3D1.Correlation analysis revealed K_(L)negatively correlated with RUE,while K_(N)and K_(N)/K_(L)positively correlated with NUEg.These findings indicate that increasing planting density under reduced N input could maintain rice yield while enhancing resource use efficiency through regulation of canopy light and N distribution.展开更多
Transforming urban spatial structures to promote green and low-carbon development is an effective strategy.Although prior studies have examined the impact of urban polycentricity on carbon emissions and economic devel...Transforming urban spatial structures to promote green and low-carbon development is an effective strategy.Although prior studies have examined the impact of urban polycentricity on carbon emissions and economic development,research on its role in the synergistic relationship between these factors regarding carbon emission efficiency is limited.Furthermore,existing literature often overlooks nonlinear effects and interactions with other urban variables.This paper analyzed data from 295 Chinese cities in 2020,calculating urban population polycentricity,population dispersion indices,and carbon emission efficiency.Utilizing local spatial autocorrelation tools,we reveal interactions among urban population polycentricity,dispersion,carbon emissions,and carbon emission efficiency.We then employ a gradient boosting decision tree model(GBDT)to explore nonlinear and synergistic effects of polycentric urbanization.Key findings include:1)polycentric urbanization in Chinese cities exhibits significant spatial differentiation characteristics.The Polycentricity index is relatively high in economically developed eastern coastal regions with an overall low level,carbon emissions are concentrated in industrialized north-central cities and some Yangtze River Delta hubs,and carbon emission efficiency is the highest in the Yangtze River Delta while relatively low in Northeast China;there are significant spatially heterogeneous interaction characteristics among population polycentricity,population dispersion,carbon emissions,and carbon emission efficiency.2)Urban population polycentricity contributes 9.42%to total carbon emissions and 6.24%to carbon emission efficiency.3)The polycentricity index has a nonlinear impact on carbon emissions and carbon emission efficiency:no significant effect when below 0.50 or above 0.55,increased carbon emissions in 0.50-0.53,and reduced carbon emissions with improved efficiency in 0.53-0.55.4)The polycentricity index has an interaction effect with other variables;specifically,when the polycentricity index is between 0.53 and 0.55,its interaction with urban gross domestic product(GDP),urban population,urban built-up area,green coverage rate in built-up areas,urban technological expenditure,and the proportion of the output value of the secondary industry will reduce carbon emissions and improve carbon emission efficiency.These findings enhance the understanding of urban spatial structures and carbon emissions,providing valuable insights for policymakers in developing green and low-carbon strategies.展开更多
The China-ASEAN Free Trade Area(CAFTA)3.0Upgrade Protocol added a section on“Supply Chain Connectivity,”which emphasizes that all parties recognize the lessons learned from the COVID-19 pandemic and cooperate to enh...The China-ASEAN Free Trade Area(CAFTA)3.0Upgrade Protocol added a section on“Supply Chain Connectivity,”which emphasizes that all parties recognize the lessons learned from the COVID-19 pandemic and cooperate to enhance the resilience of the regional supply chain.This is an inevitable trend amid the current accelerated restructuring of the global supply chain,the complex and severe international economic and trade situation,and the impact on the regional industrial chain.It also represents a fundamental shift and consensus on the logic of supply chain cooperation between China and ASEAN countries—a transformation from“Efficiency First”to“Resilience First.”展开更多
A high-sensitivity,low-noise single photon avalanche diode(SPAD)detector was presented based on a 180 nm BCD process.The proposed device utilizes a p-implant layer/high-voltage n-well(HVNW)junction to form a deep aval...A high-sensitivity,low-noise single photon avalanche diode(SPAD)detector was presented based on a 180 nm BCD process.The proposed device utilizes a p-implant layer/high-voltage n-well(HVNW)junction to form a deep avalanche multiplication region for near-infrared(NIR)sensitivity enhancement.By optimizing the device size and electric field of the guard ring,the fill factor(FF)is significantly improved,further increasing photon detection efficiency(PDE).To solve the dark noise caused by the increasing active diameter,a field polysilicon gate structure connected to the p+anode was investigated,effectively suppressing dark count noise by 76.6%.It is experimentally shown that when the active diameter increases from 5 to 10μm,the FF is significantly improved from 20.7%to 39.1%,and thus the peak PDE also rises from 13.3%to 25.8%.At an excess bias voltage of 5 V,a NIR photon detection probability(PDP)of 6.8%at 905 nm,a dark count rate(DCR)of 2.12 cps/μm^(2),an afterpulsing probability(AP)of 1.2%,and a timing jitter of 216 ps are achieved,demonstrating excellent single photon detection performance.展开更多
Emerging and powerful genome editing tools,particularly CRISPR/Cas9,are facilitating functional genomics research and accelerating crop improvement(Jiang et al.2021;Cao et al.2023;Chen C et al.2023;Liu et al.2023a).Ho...Emerging and powerful genome editing tools,particularly CRISPR/Cas9,are facilitating functional genomics research and accelerating crop improvement(Jiang et al.2021;Cao et al.2023;Chen C et al.2023;Liu et al.2023a).However,the detection and screening of transgenic lines remain major bottlenecks,being time-consuming,labor-intensive,and inefficient during transformation and subsequent mutation identification.A simple and efficient visual marker system plays a critical role in addressing these challenges.Recent studies demonstrated that the GmW1 and RUBY reporter systems were used to obtain visual transgenic soybean(Glycine max) plants(Chen L et al.2023;Chen et al.2024).展开更多
The growing need for sustainable energy solutions,driven by rising energy shortages,environmental concerns,and the depletion of conventional energy sources,has led to a significant focus on renewable energy.Solar ener...The growing need for sustainable energy solutions,driven by rising energy shortages,environmental concerns,and the depletion of conventional energy sources,has led to a significant focus on renewable energy.Solar energy,among the various renewable sources,is particularly appealing due to its abundant availability.However,the efficiency of commercial solar photovoltaic(PV)modules is hindered by several factors,notably their conversion efficiency,which averages around 19%.This efficiency can further decline to 10%–16%due to temperature increases during peak sunlight hours.This study investigates the cooling of PV modules by applying water to their front surface through Computational fluid dynamics(CFD).The study aimed to determine the optimal conditions for cooling the PV module by analyzing the interplay between water film thickness,Reynolds number,and their effects on temperature reduction and heat transfer.The CFD analysis revealed that the most effective cooling condition occurred with a 5 mm thick water film and a Reynolds number of 10.These specific parameters were found to maximize the heat transfer and temperature reduction efficiency.This finding is crucial for the development of practical and efficient cooling systems for PV modules,potentially leading to improved performance and longevity of solar panels.Alternative cooling fluids or advanced cooling techniques that might offer even better efficiency or practical benefits.展开更多
With the objective of investigating the basis of phosphorus(P)utilization efficiency(PUE),physiological and morphological traits,two P-efficient and two P-inefficient rapeseed(Brassica napus L.)cultivars were compared...With the objective of investigating the basis of phosphorus(P)utilization efficiency(PUE),physiological and morphological traits,two P-efficient and two P-inefficient rapeseed(Brassica napus L.)cultivars were compared at the seedling stage.P-efficient cultivars showed root morphological adaptation,high P uptake activity,and greater phospholipid degradation under low P stress.Improving root morphological adaptation and reducing lipid-P allocation could allow increasing PUE in rapeseed seedlings.展开更多
Water use efficiency(WUE),as a pivotal indicator of the coupling degree within the carbon–water cycle of ecosystems,holds considerable importance in assessment of the carbon–water balance within terrestrial ecosyste...Water use efficiency(WUE),as a pivotal indicator of the coupling degree within the carbon–water cycle of ecosystems,holds considerable importance in assessment of the carbon–water balance within terrestrial ecosystems.However,in the context of global warming,WUE evolution and its primary drivers on the Tibetan Plateau remain unclear.This study employed the ensemble empirical mode decomposition method and the random forest algorithm to decipher the nonlinear trends and drivers of WUE on the Tibetan Plateau in 2001–2020.Results indicated an annual mean WUE of 0.8088 gC/mm·m^(2)across the plateau,with a spatial gradient reflecting decrease from the southeast toward the northwest.Areas manifesting monotonous trends of increase or decrease in WUE accounted for 23.64%and 9.69%of the total,respectively.Remarkably,66.67%of the region exhibited trend reversals,i.e.,39.94%of the area of the Tibetan Plateau showed transition from a trend of increase to a trend of decrease,and 26.73%of the area demonstrated a shift from a trend of decrease to a trend of increase.Environmental factors accounted for 70.79%of the variability in WUE.The leaf area index and temperature served as the major driving forces of WUE variation.展开更多
基金supported by the National Science and Technology Major Project of China(2025ZD1406703)the Open Fund of Key Laboratory of Oil&Gas Equipment,Ministry of Education(Southwest Petroleum University)(Grant No.OGE20230206).
文摘Shock waves in the nozzle during supersonic separation under different conditions can disrupt the flow field’s thermodynamic equilibrium.While it contributes to the recovery of pressure energy,it also leads to the dissipation of mechanical energy.This study aimed to investigate the effects of changes in back pressure on the shock wave position and its subsequent impact on the refrigeration performance of nozzles.A mathematical model for the supersonic gas in a nozzle was established and evaluated via experiments.The results show that when the back pressure is less than 0.2 MPa,no shock wave is generated in the nozzle,and high refrigeration and liquefaction efficiency can be ensured while effective pressure recovery is achieved.When the back pressure(pb)is increased from 0.3 to 0.6 MPa,the refrigeration efficiency of the nozzle decreases,and the shock wave position(x shock)is advanced from 157 to 118 mm.The maximum Mach number(Ma)that can be reached by the fluid in the nozzle is reduced from 1.97 to 1.27.When the back pressure is increased from 0.2 to 0.6 MPa,the minimum temperature is increased by 55.18 K.When the back pressure is greater than 0.3 MPa,the Mach number upstream of the shock wave is reduced from 1.97 to 1.27,the shock wave intensity is weakened,and the thickness of the boundary layer separation caused by the shock wave is also decreased accordingly.Therefore,to ensure refrigeration efficiency,measures should be taken to control the back pressure within a reasonable range.
基金supported by the National Natural Science Foundation of China(Nos.62171204,62171129,62001192).
文摘We propose an optimization method based on evolutionary computation for the design of broadband high-efficiency current-biased reverse load-modulation power amplifiers(CB-RLM PAs).First,given the reverse load-modulation characteristics of CB-RLM PAs,a comprehensive objective function is proposed that combines multi-state impedance trajectory constraints with in-band performance deviations.For the saturation and 6 dB power back-off(PBO)states,approximately optimal impedance regions on the Smith chart are derived using impedance constraint circles based on load-pull simulations.These regions are used together with in-band performance deviations(e.g.,saturated efficiency,6 dB PBO efficiency,and saturated output power)for matching network optimization and design.Second,a multi-objective evolutionary algorithm based on decomposition with adaptive weights,neighborhood,and global replacement is integrated with harmonic balance simulations to optimize design parameters and evaluate performance.Finally,to validate the proposed method,a broadband CB-RLM PA operating from 0.6 to 1.8 GHz is designed and fabricated.Measurement results show that the efficiencies at saturation,6 dB PBO,and 8 dB PBO all exceed 43.6%,with saturated output power being maintained at 40.9–41.5 dBm,which confirms the feasibility and effectiveness of the proposed broadband high-efficiency CB-RLM PA optimization and design approach.
基金supported by the National Natural Science Foundation of China(42071238)the Jiuzhaigou Post-Disaster Restoration and Reconstruction Program(5132202020000046)+1 种基金the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)the Ministry of Science and Technology of the People's Republic of China(2019QZKK0402)。
文摘Evaluating the effectivenes s of forest restoration projects is crucial for designing adaptive restoration strategies.However,existing studies have primarily focused on ecological outcomes while overlooking cost inputs.This gap can lead to increased uncertainties in restoration planning.Here we investigated forest dynamics in China's Upper Yangtze River Basin(UYRB)using kernel Normalized Difference Vegetation Index(kNDVI),Leaf Area Index(LAI),Gross Primary Productivity(GPP),Ku-band Vegetation Optical Depth(Ku-VOD)time series and climate data from1982 to 2020.Subsequently,we employed a residual trend analysis integrating temporal effects to determine the relative contributions of climate change and human activities to forest dynamics before and after the implementation of forest restoration engineering in 1998.Additionally,we developed an Afforestation Efficiency Index(AEI)to quantitatively assess the cost efficiency of afforestation projects.Results indicated that forest in the UYRB showed sustained increases during 1982-2020,with most areas experiencing greater growth after 1998 than before.Temporal effects of climatic factors influenced over 42.7%of the forest,and incorporating time-lag and cumulative effects enhanced climate-based explanations of forest variations by 1.61-24.73%.Human activities emerged as the dominant driver of forest dynamics post 1998,whereas climate variables predominated before this period.The cost-effectiveness of forest restoration projects in the UYRB typically ranges from moderate to high,with higher success predominantly observed in the northeastern and eastern counties,while the central,western,and northwestern counties mainly showed relatively low efficiency.These findings stress the need for assessing forest restoration outcomes from both ecological and cost perspectives,and can offer valuable insights for optimizing the layout of forest restoration initiatives in the UYRB.
文摘The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.
基金the funding by the ARC Research Hub for Advanced Manufacturing with 2D Materials(ARC IH210100025)。
文摘Towards the development of highly efficient electrochromic coatings,the crystallinity,morphology(e.g.size and shape)of electrochromic nanomaterials,and their charge insertion capacities play a significant role.Herein,we report the structure-dependent colouration effciency in electrochromic coatings based on the use of 0D,1D and 2D tungsten trioxide(WO_(3))nanostructures.A series of WO_(3)with different nanostructures were prepared and used as working electrodes to fabricate electrochromic devices for smart windows applications.Facile spray coating was applied on fluorine-doped tin oxide(FTO)substrate to make~70%transparent working electrodes to investigate their charge insertion capacities,electrochromic active surface area,and colouration efficiency.Results showed that the 2D WO_(3)nanoflakes displayed the highest diffusion coefficient for the intercalation of 1.52×10^(-10)cm^(2)/s with an increased electrochemical active surface area of 25.10 mF/cm^(2),a large modulation of optical reflectance(42.63%)with 3.79 s shorter response time for bleaching and a greater colouration efficiency(CE)value(89.29 cm^(2)/C)at 700 nm compared to the CE value for 1D WO_(3)(of 22 cm^(2)/C)and 0D WO_(3)(8 cm^(2)/C).The outcome of this study provides a new insight and valuable contribution to design an efficient electrochromic coating by controlling and optimising the nanostructures of selective electrochromic materials.
基金Financial support from the National Natural Science Foundation of China(22375024,21975031,21734009,51933001,22109080,and 52173174)the Natural Science Foundation of Shandong Province(No.ZR2022YQ45)+2 种基金the Taishan Scholars Program(Nos.tstp20221121 and tsqnz20221134)The Beijing Natural Science Foundation(No.2244073)supported by State Key Laboratory of Bio-Fibers and Eco-Textiles(Qingdao University)(RZ2200002821)is acknowledged.
文摘A nonfused ring electron acceptor(NFREA),designated as TT-Ph-C6,has been synthesized with the aim of enhancing the power conversion efficiency(PCE)of organic solar cells(OSCs).By integrating asymmetric phenylalkylamino side groups,TT-Ph-C6 demonstrates excellent solubility and its crystal structure exhibits compact packing structures with a three-dimensional molecular stacking network.These structural attributes markedly promote exciton diffusion and charge carrier mobility,particularly advantageous for the fabrication of thick-film devices.TT-Ph-C6-based devices have attained a PCE of 18.01%at a film thickness of 100 nm,and even at a film thickness of 300 nm,the PCE remains at 14.64%,surpassing that of devices based on 2BTh-2F.These remarkable properties position TT-Ph-C6 as a highly promising NFREA material for boosting the efficiency of OSCs.
基金supported in part by the Opening Project of Guangxi Wireless Broadband Communication and Signal Processing Key Laboratory under Grant AD25069102in part by the Basic Ability Improvement Project of Young and Middle Aged Teachers in Guangxi Universities,under Grant 2023KY0226+6 种基金in part by Key Laboratory of Cognitive Radio and Information Processing,Ministry of Education of China,underGrant CRKL220108in part by the Innovation Project of Guangxi Graduate Education,under Grant YCBZ2023131in part by the Doctoral Research Foundation of Guilin University of Electronic Technology,under Grant UF23038Yin part by the Bagui Youth Top Talent Projectin part by the Guangxi Key Research and Development Program under Grant AB25069510in part by Open Fund of IPOC(BUPT),No.IPOC2024B07in part by Guangxi Key Laboratory of Precision Navigation Technology and Application,under Grant DH202309.
文摘UAV-mounted intelligent reflecting surface(IRS)helps address the line-of-sight(LoS)blockage between sensor nodes(SNs)and the fusion center(FC)in Internet of Things(IoT).This paper considers an IoT assisted by multiple UAVs-mounted IRS(U-IRS),where the data from ground SNs are transmitted to the FC.In practice,energy efficiency(EE)and mission completion time are crucial metrics for evaluating system performance and operational costs.Recognizing their importance during data collection,we formulate a multi-objective optimization problem to maximize EE and minimize total mission completion time simultaneously.To characterize this tradeoff while considering optimization objective consistency,we construct an optimization problem that minimizes the weighted sum of the total mission completion time and the reciprocal of EE.Due to the non-convex nature of the formulated problem,obtaining optimal solutions is generally challenging.To tackle this issue,we decompose it into three subproblems:UAV-SN association,number of reflecting elements allocation,andUAVtrajectory optimization.An iterative algorithmcombining genetic algorithm,CS-BJ algorithm,and successive convex approximation technique is proposed to solve these sub-problems.Simulation results demonstrate that when the transmitted data amount is 10 and 30Mbits,compared to the static collection benchmark(the UAV hovers directly above each SN),the EE of the proposed method improves by more than 10.4% and 5.2%,while the total mission completion time is reduced by more than 5.4% and 3.3%,respectively.
基金funded by the National Natural Science Foundation of China(No.32201304)the Fundamental Research Funds for the Central Universities(2412022QD026)。
文摘Human-modified landscapes serve as ecological filters,determining species distributions and persistence.Energy-efficient technologies,while crucial for climate change mitigation,represent novel filters whose impacts on synanthropic biodiversity are poorly understood.We investigated how attached sunspaces,a widely adopted energy-saving technology in rural China,filter the distribution of two ecologically important aerial insectivores,the Barn Swallow(Hirundo rustica)and Red-rumped Swallow(Cecropis daurica).We surveyed 106 villages during the 2024 and 2025 breeding seasons and recorded a total of 2323 nests(612 Barn Swallow,1711 Red-rumped Swallow).Using Generalized Linear Models,we assessed their responses to building characteristics,landscape composition and the prevalence of sunspaces.Barn Swallow nests preferred perches at the base and single attachment faces,while Red-rumped Swallow nests favored multiple attachment faces and avoided long shelters.The proportion of buildings with sunspaces acted as a strong positive filter for Barn Swallow nest abundance(+24%)but as a significant negative filter for Red-rumped Swallow(-51%).Other landscape variables(e.g.,human population density,NDVI,Human Footprint Index)were not significant.This study demonstrates that specific architectural innovations can act as powerful ecological filters,leading to divergent distributional outcomes for sympatric species reliant on anthropogenic structures.Our findings reveal a critical trade-off in sustainable development:energy efficiency gains may inadvertently reduce habitat suitability for certain species.To reconcile climate and biodiversity goals in rural landscapes,we advocate integrating species-specific habitat requirements into building design.We propose actionable modifications to sunspaces to support swallows without compromising energy savings.These principles provide a template for mitigating the distributional impacts of green infrastructure globally.
基金supported by the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDA0520403)Shanghai Municipal Science and Technology Major Project(Grant No.2019SHZDZX01)+1 种基金Innovation Program for Quantum Science and Technology(Grant No.2023ZD0300100)the National Natural Science Foundation of China(Grant Nos.U24A20320 and 62401554)。
文摘We here report a high system detection efficiency(SDE)superconducting single-photon detector(SSPD)at 2μm wavelength.The device integrates a SiO_(2)/Ta_(2)O_(5)distributed Bragg reflector(DBR)and a sandwich-structured double-layer NbN nanowire to enhance the optical absorption efficiency.A cold development technique is implemented to optimize the superconducting nanowires with sub-40-nm linewidths,thus enhancing the intrinsic detection efficiency(IDE).The fabricated SSPD shows an SDE exceeding 90% at 2μm wavelength.Moreover,the detector allows an operational working temperature of 2.2 K provided by a compact GM cryo-cooler.This detector delivers excellent performance at the 2μm wavelength,and its optimized structural design implies promising potential for extending detection toward longer infrared bands.It thus holds value for advancing high-sensitivity quantum technologies,mid-infrared optical communications,and dark matter detection research.
基金support from the Heilongjiang Province"Double First Class"Discipline Collaborative Innovation Project(No.LJGXCG2023-061).
文摘Hard carbon is a vital anode material for sodium-ion batteries;however,the nonuniform growth of solid electrolyte interphase(SEI)film substantially diminishes its initial coulombic efficiency(ICE)and cycle life.The chemical and morphological properties of surface highly influence the electrode/electrolyte interfacial reactions.In this study,we have tuned orbital hybridization states forming an interface enriched with sp^(2) hybridized carbon(sp^(2)-C),which decreases the binding energy to solvent molecules and inhibits excessive solvent decomposition during SEI formation.Benefiting from successfully constructed inorganic-rich SEI,the ICE increased to 91%and sodium storage capacity reached 346 mAh/g.Besides,the capacity retention rate was 90.7%after 700 cycles at 1 A/g higher than pristine electrode(83.8%).
文摘Managing massive data flows effectively and resolving spectrum shortages are two challenges that smart grid communication networks(SGCN)must overcome.To address these problems,we provide a combined optimization approach that makes use of cognitive radio(CR)and non-orthogonal multiple access(NOMA)technologies.Our work focuses on using user pairing(UP)and power allocation(PA)techniques to maximize energy efficiency(EE)in SGCN,particularly within neighbourhood area networks(NANs).We develop a joint optimization problem that takes into account the real-world limitations of a CR-NOMA setting.This problem is NP-hard,nonlinear,and nonconvex by nature.To address the computational complexity of the problem,we use the block coordinate descent(BCD)method,which breaks the problem into UP and PA subproblems.Initially,we proposed the zebra-optimization user pairing(ZOUP)algorithm to tackle the UP problem,which outperforms both orthogonal multiple access(OMA)and non-optimized NOMA(UPWO)by 78.8%and13.6%,respectively,at a SNR of 15 dB.Based on the ZOUP pairs,we subsequently proposed the PA approach,i.e.,ZOUPPA,which significantly outperforms UPWO and ZOUP by 53.2%and 25.4%,respectively,at an SNR of 15 dB.A detailed analysis of key parameters,including varying SNRs,power allocation constants,path loss exponents,user density,channel availability,and coverage radius,underscores the superiority of our approach.By facilitating the effective use of communication resources in SGCN,our research opens the door to more intelligent and energy-efficient grid systems.Our work tackles important issues in SGCN and lays the groundwork for future developments in smart grid communication technologies by combining modern optimization approaches with CR-NOMA.
文摘A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescence(TADF)properties.All calculations were performed using density functional theory(DFT)and time‑dependent density functional theory(TDDFT).Calculations for electronic structures,frontier molecular orbital characteristics(which determine the efficiency roll‑off effect of the complexes),and photophysical properties were conducted using the Gaussian 09 software package.The calculation of spin‑orbit coupling matrix elements<T|HSOC|S>,which determine the TADF properties of the complexes,was performed using the ORCA software package.The calculation results show that the auxiliary ligand tetraphenylimidodiphosphinate(tpip),a strong electron‑withdrawing group,can mitigate the efficiency roll‑off effect of the complex.Furthermore,TADF is observed in one of the designed complexes,(F_(3)Phppy)_(2)Ir(tpip),where F_(3)Phppy=2‑[4‑(2,4,6‑trifluorophenyl)phenyl]pyridine.
基金supported by the Hubei Provincial Science and Technology Project,China(2025CSA039)the National Natural Science Foundation of China(32001467)。
文摘Coordinating light and nitrogen(N)distribution within a canopy is essential for improving rice yield and resource use efficiency.However,limited research has examined light and N distribution in response to planting density and N rate,and their relationships with grain yield,radiation use efficiency(RUE),and N use efficiency for grain production(NUEg)in rice.A two-year field experiment was conducted with two hybrid varieties under three N levels,0 kg ha^(-1)(N1),90 kg ha^(-1)(N2)and 180 kg ha^(-1)(N3),and two planting densities,22.2 hills m-2(D1)and 33.3 hills m^(-2)(D2).Results showed 3.4%higher yield and 4.4%higher NUEg under N2D2 compared with N3D1.The extinction coefficient for N(K_(N))and light(K_(L))and their ratio(K_(N)/K_(L))at heading stage were significantly influenced by N rate,planting density,and their interaction.K_(N)decreased with the increase of N input or planting density.Compared to N1,K_(N)decreased by 43.5 and 58.8%under N2 and N3,respectively,while K_(N)under D2 decreased by 16.0%compared to D1.Higher K_(L)and K_(N)/K_(L)values occurred under low N rates,with opposite trends under high N rates.Increased planting density led to decreased K_(L)and K_(N)/K_(L)values.N2D2 demonstrated higher K_(L)and K_(N),and thus comparable K_(N)/K_(L),compared to N3D1.Correlation analysis revealed K_(L)negatively correlated with RUE,while K_(N)and K_(N)/K_(L)positively correlated with NUEg.These findings indicate that increasing planting density under reduced N input could maintain rice yield while enhancing resource use efficiency through regulation of canopy light and N distribution.
基金Under the auspices of National Natural Science Foundation of China(No.42571300)。
文摘Transforming urban spatial structures to promote green and low-carbon development is an effective strategy.Although prior studies have examined the impact of urban polycentricity on carbon emissions and economic development,research on its role in the synergistic relationship between these factors regarding carbon emission efficiency is limited.Furthermore,existing literature often overlooks nonlinear effects and interactions with other urban variables.This paper analyzed data from 295 Chinese cities in 2020,calculating urban population polycentricity,population dispersion indices,and carbon emission efficiency.Utilizing local spatial autocorrelation tools,we reveal interactions among urban population polycentricity,dispersion,carbon emissions,and carbon emission efficiency.We then employ a gradient boosting decision tree model(GBDT)to explore nonlinear and synergistic effects of polycentric urbanization.Key findings include:1)polycentric urbanization in Chinese cities exhibits significant spatial differentiation characteristics.The Polycentricity index is relatively high in economically developed eastern coastal regions with an overall low level,carbon emissions are concentrated in industrialized north-central cities and some Yangtze River Delta hubs,and carbon emission efficiency is the highest in the Yangtze River Delta while relatively low in Northeast China;there are significant spatially heterogeneous interaction characteristics among population polycentricity,population dispersion,carbon emissions,and carbon emission efficiency.2)Urban population polycentricity contributes 9.42%to total carbon emissions and 6.24%to carbon emission efficiency.3)The polycentricity index has a nonlinear impact on carbon emissions and carbon emission efficiency:no significant effect when below 0.50 or above 0.55,increased carbon emissions in 0.50-0.53,and reduced carbon emissions with improved efficiency in 0.53-0.55.4)The polycentricity index has an interaction effect with other variables;specifically,when the polycentricity index is between 0.53 and 0.55,its interaction with urban gross domestic product(GDP),urban population,urban built-up area,green coverage rate in built-up areas,urban technological expenditure,and the proportion of the output value of the secondary industry will reduce carbon emissions and improve carbon emission efficiency.These findings enhance the understanding of urban spatial structures and carbon emissions,providing valuable insights for policymakers in developing green and low-carbon strategies.
文摘The China-ASEAN Free Trade Area(CAFTA)3.0Upgrade Protocol added a section on“Supply Chain Connectivity,”which emphasizes that all parties recognize the lessons learned from the COVID-19 pandemic and cooperate to enhance the resilience of the regional supply chain.This is an inevitable trend amid the current accelerated restructuring of the global supply chain,the complex and severe international economic and trade situation,and the impact on the regional industrial chain.It also represents a fundamental shift and consensus on the logic of supply chain cooperation between China and ASEAN countries—a transformation from“Efficiency First”to“Resilience First.”
基金supported by the National Natural Science Foundation of China under Grant 62171233the Natural Science Foundation of China,Jiangsu Province under Grant BK20241891the Jiangsu Province Graduate Research and Practice Innovation Plan under Grants SJCX24_0313 and KYCX24_1169。
文摘A high-sensitivity,low-noise single photon avalanche diode(SPAD)detector was presented based on a 180 nm BCD process.The proposed device utilizes a p-implant layer/high-voltage n-well(HVNW)junction to form a deep avalanche multiplication region for near-infrared(NIR)sensitivity enhancement.By optimizing the device size and electric field of the guard ring,the fill factor(FF)is significantly improved,further increasing photon detection efficiency(PDE).To solve the dark noise caused by the increasing active diameter,a field polysilicon gate structure connected to the p+anode was investigated,effectively suppressing dark count noise by 76.6%.It is experimentally shown that when the active diameter increases from 5 to 10μm,the FF is significantly improved from 20.7%to 39.1%,and thus the peak PDE also rises from 13.3%to 25.8%.At an excess bias voltage of 5 V,a NIR photon detection probability(PDP)of 6.8%at 905 nm,a dark count rate(DCR)of 2.12 cps/μm^(2),an afterpulsing probability(AP)of 1.2%,and a timing jitter of 216 ps are achieved,demonstrating excellent single photon detection performance.
基金supported by the Jilin Science and Technology Development Program,China (20240602032RC)the Jilin Agricultural Science and Technology Innovation Project,China (CXGC2024ZD001)+1 种基金the Jilin Agricultural Science and Technology Innovation Project,China (CXGC2024ZY012)the Jilin Province Development and Reform Commission-Project for Improving the Independent Innovation Capacity of Major Grain Crops,China (2024C002)。
文摘Emerging and powerful genome editing tools,particularly CRISPR/Cas9,are facilitating functional genomics research and accelerating crop improvement(Jiang et al.2021;Cao et al.2023;Chen C et al.2023;Liu et al.2023a).However,the detection and screening of transgenic lines remain major bottlenecks,being time-consuming,labor-intensive,and inefficient during transformation and subsequent mutation identification.A simple and efficient visual marker system plays a critical role in addressing these challenges.Recent studies demonstrated that the GmW1 and RUBY reporter systems were used to obtain visual transgenic soybean(Glycine max) plants(Chen L et al.2023;Chen et al.2024).
文摘The growing need for sustainable energy solutions,driven by rising energy shortages,environmental concerns,and the depletion of conventional energy sources,has led to a significant focus on renewable energy.Solar energy,among the various renewable sources,is particularly appealing due to its abundant availability.However,the efficiency of commercial solar photovoltaic(PV)modules is hindered by several factors,notably their conversion efficiency,which averages around 19%.This efficiency can further decline to 10%–16%due to temperature increases during peak sunlight hours.This study investigates the cooling of PV modules by applying water to their front surface through Computational fluid dynamics(CFD).The study aimed to determine the optimal conditions for cooling the PV module by analyzing the interplay between water film thickness,Reynolds number,and their effects on temperature reduction and heat transfer.The CFD analysis revealed that the most effective cooling condition occurred with a 5 mm thick water film and a Reynolds number of 10.These specific parameters were found to maximize the heat transfer and temperature reduction efficiency.This finding is crucial for the development of practical and efficient cooling systems for PV modules,potentially leading to improved performance and longevity of solar panels.Alternative cooling fluids or advanced cooling techniques that might offer even better efficiency or practical benefits.
基金supported by the National Key Research and Development Program of China(2024YFD2301200)National Nature Science Foundation of China(32172662).
文摘With the objective of investigating the basis of phosphorus(P)utilization efficiency(PUE),physiological and morphological traits,two P-efficient and two P-inefficient rapeseed(Brassica napus L.)cultivars were compared at the seedling stage.P-efficient cultivars showed root morphological adaptation,high P uptake activity,and greater phospholipid degradation under low P stress.Improving root morphological adaptation and reducing lipid-P allocation could allow increasing PUE in rapeseed seedlings.
基金National Nonprofit Institute Research Grant of CAF,No.CAFYBB2018ZA004,No.CAFYBB2023ZA009Fengyun Application Pioneering Project,No.FY-APP-ZX-2023.02。
文摘Water use efficiency(WUE),as a pivotal indicator of the coupling degree within the carbon–water cycle of ecosystems,holds considerable importance in assessment of the carbon–water balance within terrestrial ecosystems.However,in the context of global warming,WUE evolution and its primary drivers on the Tibetan Plateau remain unclear.This study employed the ensemble empirical mode decomposition method and the random forest algorithm to decipher the nonlinear trends and drivers of WUE on the Tibetan Plateau in 2001–2020.Results indicated an annual mean WUE of 0.8088 gC/mm·m^(2)across the plateau,with a spatial gradient reflecting decrease from the southeast toward the northwest.Areas manifesting monotonous trends of increase or decrease in WUE accounted for 23.64%and 9.69%of the total,respectively.Remarkably,66.67%of the region exhibited trend reversals,i.e.,39.94%of the area of the Tibetan Plateau showed transition from a trend of increase to a trend of decrease,and 26.73%of the area demonstrated a shift from a trend of decrease to a trend of increase.Environmental factors accounted for 70.79%of the variability in WUE.The leaf area index and temperature served as the major driving forces of WUE variation.
