At present,one of the methods used to determine the height of points on the Earth’s surface is Global Navigation Satellite System(GNSS)leveling.It is possible to determine the orthometric or normal height by this met...At present,one of the methods used to determine the height of points on the Earth’s surface is Global Navigation Satellite System(GNSS)leveling.It is possible to determine the orthometric or normal height by this method only if there is a geoid or quasi-geoid height model available.This paper proposes the methodology for local correction of the heights of high-order global geoid models such as EGM08,EIGEN-6C4,GECO,and XGM2019e_2159.This methodology was tested in different areas of the research field,covering various relief forms.The dependence of the change in corrected height accuracy on the input data was analyzed,and the correction was also conducted for model heights in three tidal systems:"tide free","mean tide",and"zero tide".The results show that the heights of EIGEN-6C4 model can be corrected with an accuracy of up to 1 cm for flat and foothill terrains with the dimensionality of 1°×1°,2°×2°,and 3°×3°.The EGM08 model presents an almost identical result.The EIGEN-6C4 model is best suited for mountainous relief and provides an accuracy of 1.5 cm on the 1°×1°area.The height correction accuracy of GECO and XGM2019e_2159 models is slightly poor,which has fuzziness in terms of numerical fluctuation.展开更多
To obtain final parts with the desired dimensional accuracy and repeatability via electrochemical machining(ECM), the machining process must enter an ECM balanced state. However,for the ECM processing of blisk, a key ...To obtain final parts with the desired dimensional accuracy and repeatability via electrochemical machining(ECM), the machining process must enter an ECM balanced state. However,for the ECM processing of blisk, a key component of aerospace engines, the surface of the blade blank often has an uneven allowance distribution due to the narrow passage of the cascade. It is difficult to remedy this issue in subsequent processing steps, which is necessary to ensure the dimensional accuracy and repeatability of the final blade profile. To solve this problem, electrolytic machining must be preceded by electrolytic shaping, which requires cathode tools with large leveling ratios to quickly homogenize the blank surface of the blade. In this study, to obtain a cathode tool with an extremely high leveling ratio, a design method based on the variation in the electrode gap in the non-equilibrium electrolytic state is proposed, and a dissolution model based on the nonequilibrium state is established. In this design method, the allowance on the blank to be machined is first divided into many discrete allowances with the normal direction. The initial machining clearance, feed rate, and total machining time are then calculated using classical ECM equilibrium state theory based on the maximum allowance. Meanwhile, the point coordinates of the cathode tool at maximum allowance can be determined. The non-equilibrium model can then be used to calculate the relative coordinate positions corresponding to the remaining discrete allowances. Finally, the entire cathode tool profile is designed. Simulations, fundamental experiments, and blisk unit workpiece experiments were carried out to validate the design approach. In the simulated processing of the plane workpiece, the leveling ratio of the cathode tool designed by the proposed method(0.77)was 83% higher than that of the cathode tool designed using the traditional method. The simulation results were confirmed by processing experiments. In the machining of blisk unit workpieces with complex curved surfaces, the leveling ratios of the convex and concave parts of the blade machined using the proposed cathode tool respectively reached 0.75 and 0.54, which are 75% and 38% higher than those obtained using the traditional method. This new cathode design method and machining technology can significantly improve the surface allowance distribution of blank before electrolytic finishing. It is helpful for finishing machine to enter electrolytic equilibrium state. Finally, the final blade profile accuracy can be guaranteed and repeated errors can be reduced.展开更多
For the diagnostics and health management of lithium-ion batteries,numerous models have been developed to understand their degradation characteristics.These models typically fall into two categories:data-driven models...For the diagnostics and health management of lithium-ion batteries,numerous models have been developed to understand their degradation characteristics.These models typically fall into two categories:data-driven models and physical models,each offering unique advantages but also facing limitations.Physics-informed neural networks(PINNs)provide a robust framework to integrate data-driven models with physical principles,ensuring consistency with underlying physics while enabling generalization across diverse operational conditions.This study introduces a PINN-based approach to reconstruct open circuit voltage(OCV)curves and estimate key ageing parameters at both the cell and electrode levels.These parameters include available capacity,electrode capacities,and lithium inventory capacity.The proposed method integrates OCV reconstruction models as functional components into convolutional neural networks(CNNs)and is validated using a public dataset.The results reveal that the estimated ageing parameters closely align with those obtained through offline OCV tests,with errors in reconstructed OCV curves remaining within 15 mV.This demonstrates the ability of the method to deliver fast and accurate degradation diagnostics at the electrode level,advancing the potential for precise and efficient battery health management.展开更多
Computed tomography is an indispensable X-ray imaging modality used to diagnose numerous pathologies, but it can also involve the delivery of high ionizing radiation doses harmful to the health of patients. This study...Computed tomography is an indispensable X-ray imaging modality used to diagnose numerous pathologies, but it can also involve the delivery of high ionizing radiation doses harmful to the health of patients. This study aims to survey the level of radiation doses delivered to child patients during head exams in CT imaging to set up the Dosimetric Reference Levels (DRLs), a routine dose optimization tool, based on data acquired at the University Hospital of Angré (UHA), the University Hospital of Treichville (UHT) and the Polyclinic Hospital Farah (Farah) for optimizing procedures in Ivorian hospitals. Prospectively performed on 334 CT images of 186 child patients, this study was carried out on CT systems such as Hitachi Scenaria, Sinovision Insitum, and Philips Incisive used respectively at UHA, UHT and Farah. Children’s scan data were classified into four age bands: vol or dose-length product as DLP) value, whatever the hospital, increases with respect to the age of child patients. Based on the 75th percentile of the whole dose distributions, the DRLs of the CTDIvol is 54.37 mGy whatever the age groups and those of the DLP with respect to age bands are 1224.55 mGy∙cm, 1414.06 mGy∙cm, 1632.24 mGy.cm and 1544.57 mGy∙cm, respectively. The averaged values of CTDIvol and DLP smaller than the corresponding DRLs values suggest that practices in our three facilities are optimized. However, comparing our results with those from different international studies, we see that the CTDIvol and DLP values obtained in the present work are higher. These results suggest additional surveys to ensure our DRLs values and efforts from radiologists, imaging technicians and medical physicists to strengthen clinical procedures for the radiation protection of children undergoing CT scans in Côte d’Ivoire.展开更多
Metallogenic research on structural levels can reveal vertical patterns of mineralization and facilitate the deep exploration of economic minerals.However,research focusing on the correlation between structural levels...Metallogenic research on structural levels can reveal vertical patterns of mineralization and facilitate the deep exploration of economic minerals.However,research focusing on the correlation between structural levels and mineralization remains limited.In this study,we summarize the deformation patterns and associated mineral deposits observed at different crustal levels(i.e.,surface,shallow,middle,and deep structural levels,corresponding to depths of<2,2-8,8-15,and>15 km,respectively).Furthermore,we examine the genetic association between structural levels and metallogenesis,demonstrating that distinct structural levels are linked to specific types of mineralization.Key factors that vary across crustal levels include temperature,pressure,and fluid circulation.Ore-forming processes involve interactions between structures and fluids under varying temperatures and pressures.Structural levels influence mineralization by controlling the temperatures,pressures,and deformation mechanisms that drive the activation,migration,and enrichment of ore-forming materials.展开更多
BackgroundIt's crucial to study the effect of changes in thresholds(T)and most comfortable levels(M)on behavioral measurements in young children using cochlear implants.This would help the clinician with the optim...BackgroundIt's crucial to study the effect of changes in thresholds(T)and most comfortable levels(M)on behavioral measurements in young children using cochlear implants.This would help the clinician with the optimization and validation of programming parameters.ObjectiveThe study has attempted to describe the changes in behavioral responses with modification of T and M levels.MethodsTwenty-five participants in the age range 5 to 12 years using HR90K/HiFocus1J or HR90KAdvantage/HiFocus1J with Harmony speech processors participated in the study.A decrease in T levels,a rise in T levels,or a decrease in M levels in the everyday program were used to create experimental programs.Sound field thresholds and speech perception were measured at 50 dBHL for three experimental and everyday programs.ConclusionThe results indicated that only reductions of M levels resulted in significantly(p<0.01)poor aided thresholds and speech perception.On the other hand,variation in T levels did not have significant changes in either sound field thresholds or speech perception.The results highlight that M levels must be correctly established in order to prevent decreased speech perception and audibility.展开更多
The purpose of this research was to evaluate radiological safety in pediatric radiology in hospitals in the Kongo Central province of the DRC. To this end, we surveyed a convenience sample of 50 health professionals, ...The purpose of this research was to evaluate radiological safety in pediatric radiology in hospitals in the Kongo Central province of the DRC. To this end, we surveyed a convenience sample of 50 health professionals, including 10 radiologists working in the hospitals covered by the survey, to assess the practice of pediatric radiology and the degree of compliance with radiation protection principles for the safety of children and the environment. We collected radiophysical parameters to calculate entrance doses in pediatric radiology in radiology departments to determine the dosimetric level by comparison with the diagnostic reference levels of the International Commission on Radiological Protection (ICRP). All in all, we found that in Kongo Central in the DRC, many health personnel surveyed reported that more than 30% of requested radiological examinations are not justified. Also, after comparing the entrance doses produced in the surveyed departments with those of the International Commission on Radiological Protection (ICRP), a statistically significant difference was found in pediatric radiology between the average doses in five out of six surveyed departments and those of the ICRP. Therefore, almost all of the surveyed departments were found to be highly irradiating in children, while excessive X-ray irradiation in children can have significant effects due to their increased sensitivity to radiation. Among the risks are: increased cancer risks, damage to developing cells, potential genetic effects, and neurological effects. This is why support for implementing radiation protection principles is a necessity to promote the safety of patients and the environment against the harmful effects of X-rays in conventional radiology.展开更多
This paper aims to explore the development strategies for subject services in university libraries within the context of the“double first-class”initiative.By examining the relationship between“double first-class”c...This paper aims to explore the development strategies for subject services in university libraries within the context of the“double first-class”initiative.By examining the relationship between“double first-class”construction and university library subject services,the study analyzes the current state of subject services,including resource development,service models,and team building.Drawing on domestic and international case studies,the paper proposes a series of targeted and practical strategies to enhance the quality of subject services in university libraries,thereby providing robust support for the advancement of the“double first-class”initiative.展开更多
This article analyzes the application strategies of Building Information Modeling(BIM)support technology in a first-class highway reconstruction and expansion project based on its actual situation.According to the bas...This article analyzes the application strategies of Building Information Modeling(BIM)support technology in a first-class highway reconstruction and expansion project based on its actual situation.According to the basic situation of BIM technology and its application goals in this project,it explores application strategies such as BIM model construction,BIM prefabricated structural model deepening and schedule simulation,BIM collision detection,and BIM tunnel pre-construction simulation.Through this analysis,it is hoped to provide a reference for the rational application of BIM support technology and ensure the high-quality and efficient completion of first-class highway reconstruction and expansion projects.展开更多
The Thwaites Glacier in western Antarctica(Fig. 1) keeps glaciologists and climate scientists awake at night. The 120 kmwide glacier loses about 45 billion tonnes of ice each year, accounting for about 4% of global se...The Thwaites Glacier in western Antarctica(Fig. 1) keeps glaciologists and climate scientists awake at night. The 120 kmwide glacier loses about 45 billion tonnes of ice each year, accounting for about 4% of global sea level rise [1]. If it melted completely, sea levels would climb 65 cm, and follow-on effects could lead to a 3 m increase [2]. But if some scientists' vision becomes reality, in 10–15 years construction crews will sail into the Amundsen Sea off Antarctica to begin building an 80 km long underwater curtain that will shield the glacier from the warm currents that are accelerating its decline [3].展开更多
Water level is the overriding control on carbon cycles in peatlands,which are important for global carbon cycles and ecosystem services.To date,our knowledge of the pattern of water level fluctuations in peatlands and...Water level is the overriding control on carbon cycles in peatlands,which are important for global carbon cycles and ecosystem services.To date,our knowledge of the pattern of water level fluctuations in peatlands and the influence of precipitation and air temperature on them in the subtropical remains poor.In this study,we conducted continuous high-resolution monitoring of water levels from 2014 to 2021 in the Dajiuhu peatland,a typically subtropical peatland in central China.Monitoring results showed that the water level had strong annual(370 days) and seasonal(130 days) oscillations in the Dajiuhu peatland.The annual oscillation is associated with both precipitation and temperature,while the seasonal oscillation is mainly controlled by precipitation.In addition,the depth of peat surface to the water table(DWT) has weak but significant correlations with precipitation and temperature on the daily and weekly scales(r = 0.1–0.21,p<0.01).Once replacing DWT with water table fluctuation cumulation,the correlation coefficients increase apparently(r = 0.47–0.69,p<0.01),especially on the monthly scale.These findings highlight a more important role of the fluctuation than the mean position of water level and have the potential to improve the interpretation of water-level related paleoenvironmental proxies and the understanding of the relationship between water level and biogeochemical processes.展开更多
Separation between water and land is vital for marine scientific research and coastal zone planning and management.The contrasting backscatter properties of land and ocean enable clear water edge line identification i...Separation between water and land is vital for marine scientific research and coastal zone planning and management.The contrasting backscatter properties of land and ocean enable clear water edge line identification in synthetic aperture radar(SAR)imagery.However,SAR images are prone to speckle noise,and the complexity of the water-land boundaries environment makes accurate water-land separation challenging.To overcome noise and complex background interference in remote sensing images,an improved level set method was employed to enhance water-land separation.In the traditional distance regularized level set method,the selection of the image correlation weight coefficient and the edge indicator function directly influences the accuracy of the final segmentation results.A novel level set segmentation algorithm incorporating an improved edge indicator function is proposed to efficiently and accurately separate the water edge lines in SAR images.The distance regularized level set evolution model is enhanced by incorporating the signed pressure force function as an adaptive parameter,which serves as an external constraint for curve evolution.A novel level set model with an adaptive edge indicator function,combining gradient and regional information,is proposed.Experimental results demonstrate that the proposed model enhances the accuracy of waterland separation in SAR images.However,further research is needed to evaluate its potential for detecting boundaries in diverse marine environments and across different types of SAR imagery.展开更多
A cylindrical chamber with a rotating bottom holds significant potential for application in cell culture bioreactors due to its ability to generate more stable swirling flows.In order to control vortex breakdown withi...A cylindrical chamber with a rotating bottom holds significant potential for application in cell culture bioreactors due to its ability to generate more stable swirling flows.In order to control vortex breakdown within the chamber,this study first establishes a computational fluid dynamics simulation coupled with the level set method.Verified by experimental results in literature,this method accurately simulates the position and shape of vortex breakdown,and also predicts the critical Reynolds numbers for the appearance and detachment of vortex breakdown bubbles from the center.Additionally,it precisely captures the gas-liquid interface and depicts the vortex breakdown phenomenon in the air above the liquid for the first time.Finally,it predicts the impact of physical property of gas-liquid systems on vortex breakdown in response to significant changes in viscosity of microbial process systems.展开更多
A data-driven model ofmultiple variable cutting(M-VCUT)level set-based substructure is proposed for the topology optimization of lattice structures.TheM-VCUTlevel setmethod is used to represent substructures,enriching...A data-driven model ofmultiple variable cutting(M-VCUT)level set-based substructure is proposed for the topology optimization of lattice structures.TheM-VCUTlevel setmethod is used to represent substructures,enriching their diversity of configuration while ensuring connectivity.To construct the data-driven model of substructure,a database is prepared by sampling the space of substructures spanned by several substructure prototypes.Then,for each substructure in this database,the stiffness matrix is condensed so that its degrees of freedomare reduced.Thereafter,the data-drivenmodel of substructures is constructed through interpolationwith compactly supported radial basis function(CS-RBF).The inputs of the data-driven model are the design variables of topology optimization,and the outputs are the condensed stiffness matrix and volume of substructures.During the optimization,this data-driven model is used,thus avoiding repeated static condensation that would requiremuch computation time.Several numerical examples are provided to verify the proposed method.展开更多
The optimization of hole transport layer(HTL)is crucial for achieving high efficiency and stability in inverted perovskite solar cells(PSCs)due to its role in facilitating hole transport and passivating the perovskite...The optimization of hole transport layer(HTL)is crucial for achieving high efficiency and stability in inverted perovskite solar cells(PSCs)due to its role in facilitating hole transport and passivating the perovskite bottom interface.While self-assembled monolayers(SAMs)are commonly used for this purpose,the inherent limitations of a single SAM,such as fixed energy levels and rigid structure,restrict their adaptability for different perovskite components and further efficiency enhancement.Here,we demonstrate a stepwise deposition method for SAM-based HTLs to address this issue.We regulated the energy level gradient by depositing two SAMs with distinct energy levels,while the interactions between the phosphate groups in the SAMs and perovskite effectively reduce defect density at the bottom interface of the perovskite film.The as-fabricated PSCs achieved enhanced efficiency and stability with PCEs of 25.7% and 24.0% for rigid and flexible PSCs,respectively;these devices maintain 90% of their initial PCE after 500 h of maximum power point tracking,and retain 98% of their initial PCE after 4,000 bending cycles,representing one of the most stable flexible PSCs reported to date.展开更多
The increasing dependence on fossil fuels and the consequent CO_(2)emissions have prompted urgent energy and environmental challenges[1,2].Solar-driven CO_(2)conversion into value-added fuels offers a sustainable and ...The increasing dependence on fossil fuels and the consequent CO_(2)emissions have prompted urgent energy and environmental challenges[1,2].Solar-driven CO_(2)conversion into value-added fuels offers a sustainable and promising solution to these issues[3].However,the practical implementation of CO_(2)photoreduction is constrained by low efficiency,primarily due to the rapid recombination of photogenerated electron-hole pairs[4].展开更多
Objective:To explore the associations between income levels,employment risk,lifestyles,occupational stress,and male fertility.Methods:This cross-sectional study analyzed 294 men seeking fertility treatment at fertilit...Objective:To explore the associations between income levels,employment risk,lifestyles,occupational stress,and male fertility.Methods:This cross-sectional study analyzed 294 men seeking fertility treatment at fertility clinics in Terengganu,Pahang,and Kuala Lumpur from November 2021 to June 2023.Data were collected through structured questionnaires covering income levels,lifestyles,employment risks,occupational stress,and semen quality.Multinomial logistic regression was employed to assess predictors of semen quality,with crude and adjusted odds ratios(OR)reported.Results:The lower-income group exhibited higher odds of having abnormal semen quality compared to normal semen quality.Specifically,these participants were more likely to experience azoospermia[crude OR 6.68,95%confidence interval(CI)1.84-52.63;adjusted OR 6.26,95%CI 1.76-51.38],indicating a link between low income and infertility issues.Lifestyle factors did not show significant associations with semen abnormalities after adjustment.High employment risks had significant associations with oligozoospermia after adjustment(crude OR 5.50,95%CI 2.14-14.11;adjusted OR 5.15,95%CI 1.93-13.71),while high occupational stress was linked to asthenozoospermia(crude OR 2.26,95%CI 1.09-4.68;adjusted OR 2.25,95%CI 1.07-4.69).Conclusions:The findings underscore the influence of socioeconomic and occupational factors on male fertility,showing associations between lower income levels,high-risk occupations,and semen abnormalities.In contrast,lifestyle factors did not show significant associations with semen abnormalities after adjustment.Nevertheless,the current findings should be further confirmed through more extensive studies focusing on abnormal semen and lifestyle factors.展开更多
In recent years,the water level in the Mekong Delta(MD)has undergone changes,attributed to the impacts of anthropogenic activities and climate change.Declining water levels have had implications for various aspects of...In recent years,the water level in the Mekong Delta(MD)has undergone changes,attributed to the impacts of anthropogenic activities and climate change.Declining water levels have had implications for various aspects of life and aquatic ecosystems in the lower basin water bodies.Analyzing long-term trends in rainfall and water levels is crucial for enhancing our understanding.This study aims to examine the evolving patterns of water level and rainfall in the region.Data on water levels and rainfall from observation stations were gathered from the National Center for Hydrometeorological Forecasting,Vietnam,spanning from 2000 to 2014.The assessment of homogeneity and identification of trend changes were conducted using the Standard Normal Homogeneity Test(SNHT)and the Mann-Kendall test.The results indicate that changes in water levels at the Tan Chau and Chau Doc stations have been observed since 2010 due to the operation of flow-regulating structures in the upper Mekong River.Following the commencement of upstream dam operations,the water level at the headwater stations of the Mekong River has been higher than the long-term average during the dry season and lower than the average during the flood season.The study findings highlight the influence of altered rainfall patterns under the impact of climate variability(ICC)on water level trends in the study area.While rainfall plays a significant role in increasing water levels during the flood season,the operation of hydropower dams(UHDs)stands out as the primary factor driving water level reductions in the study area.展开更多
Ensuring a harmonious coexistence between man and nature is crucial for China’s economic and social development.However,with increasing industrialization and urbanization,there is a growing mismatch between China’s ...Ensuring a harmonious coexistence between man and nature is crucial for China’s economic and social development.However,with increasing industrialization and urbanization,there is a growing mismatch between China’s ecological resilience(ER)and economic level(EL)of development,which poses a notable social threat.Currently,the link between ER and EL in China remains unclear,especially in terms of spatial dislocation(SD),referring to the disconnect between the locations where environmental impacts occur and those where economic benefits or activities are concentrated.Therefore,this paper aims to provide theoretical support and an empirical basis for policy-based solutions to address this gap.Based on the SD theory,this study systematically discusses the temporal changes,spatial patterns,and SD characteristics of China’s ER and EL using spatial auto-correlation and barycentric analysis to analyze data from 30 provinces covering the period 2011-2021.The key results are as follows.China’s ER shows a general trend of growth;however,its distribution is uneven.The spatial pattern generally decreases from the southeastern coastal provinces to the northwest.Moreover,a gradually increasing positive correlation is observed between the ER and EL,but this correlation varies by region,with some showing regional linkages and others developing independently.Finally,the dislocation index of ER and EL presents divergent results based on region-the eastern and central regions primarily show a high level of dislocation,whereas the western and northeastern regions show a low level of dislocation.The results provide a comprehensive overview of the spatiotemporal patterns in the association between ER and EL in China.The results emphasize that to balance sustainable regional development and ecological governance,a region-specific approach must be employed,prioritizing innovation-driven strategies for high ER in more developed regions and market-oriented strategies in less developed regions.展开更多
基金the International Center for Global Earth Models(ICGEM)for the height anomaly and gravity anomaly data and Bureau Gravimetrique International(BGI)for free-air gravity anomaly data from the World Gravity Map project(WGM2012)The authors are grateful to Głowny Urza˛d Geodezji i Kartografii of Poland for the height anomaly data of the quasi-geoid PL-geoid2021.
文摘At present,one of the methods used to determine the height of points on the Earth’s surface is Global Navigation Satellite System(GNSS)leveling.It is possible to determine the orthometric or normal height by this method only if there is a geoid or quasi-geoid height model available.This paper proposes the methodology for local correction of the heights of high-order global geoid models such as EGM08,EIGEN-6C4,GECO,and XGM2019e_2159.This methodology was tested in different areas of the research field,covering various relief forms.The dependence of the change in corrected height accuracy on the input data was analyzed,and the correction was also conducted for model heights in three tidal systems:"tide free","mean tide",and"zero tide".The results show that the heights of EIGEN-6C4 model can be corrected with an accuracy of up to 1 cm for flat and foothill terrains with the dimensionality of 1°×1°,2°×2°,and 3°×3°.The EGM08 model presents an almost identical result.The EIGEN-6C4 model is best suited for mountainous relief and provides an accuracy of 1.5 cm on the 1°×1°area.The height correction accuracy of GECO and XGM2019e_2159 models is slightly poor,which has fuzziness in terms of numerical fluctuation.
基金sponsored by the Industrial Technology Development Program (Grant No. JCKY2021605B026, and National Natural Science Foundation of China (Grant No. 92160301))。
文摘To obtain final parts with the desired dimensional accuracy and repeatability via electrochemical machining(ECM), the machining process must enter an ECM balanced state. However,for the ECM processing of blisk, a key component of aerospace engines, the surface of the blade blank often has an uneven allowance distribution due to the narrow passage of the cascade. It is difficult to remedy this issue in subsequent processing steps, which is necessary to ensure the dimensional accuracy and repeatability of the final blade profile. To solve this problem, electrolytic machining must be preceded by electrolytic shaping, which requires cathode tools with large leveling ratios to quickly homogenize the blank surface of the blade. In this study, to obtain a cathode tool with an extremely high leveling ratio, a design method based on the variation in the electrode gap in the non-equilibrium electrolytic state is proposed, and a dissolution model based on the nonequilibrium state is established. In this design method, the allowance on the blank to be machined is first divided into many discrete allowances with the normal direction. The initial machining clearance, feed rate, and total machining time are then calculated using classical ECM equilibrium state theory based on the maximum allowance. Meanwhile, the point coordinates of the cathode tool at maximum allowance can be determined. The non-equilibrium model can then be used to calculate the relative coordinate positions corresponding to the remaining discrete allowances. Finally, the entire cathode tool profile is designed. Simulations, fundamental experiments, and blisk unit workpiece experiments were carried out to validate the design approach. In the simulated processing of the plane workpiece, the leveling ratio of the cathode tool designed by the proposed method(0.77)was 83% higher than that of the cathode tool designed using the traditional method. The simulation results were confirmed by processing experiments. In the machining of blisk unit workpieces with complex curved surfaces, the leveling ratios of the convex and concave parts of the blade machined using the proposed cathode tool respectively reached 0.75 and 0.54, which are 75% and 38% higher than those obtained using the traditional method. This new cathode design method and machining technology can significantly improve the surface allowance distribution of blank before electrolytic finishing. It is helpful for finishing machine to enter electrolytic equilibrium state. Finally, the final blade profile accuracy can be guaranteed and repeated errors can be reduced.
基金supported by the Beijing Natural Science Foundation(Grant No.L223013)。
文摘For the diagnostics and health management of lithium-ion batteries,numerous models have been developed to understand their degradation characteristics.These models typically fall into two categories:data-driven models and physical models,each offering unique advantages but also facing limitations.Physics-informed neural networks(PINNs)provide a robust framework to integrate data-driven models with physical principles,ensuring consistency with underlying physics while enabling generalization across diverse operational conditions.This study introduces a PINN-based approach to reconstruct open circuit voltage(OCV)curves and estimate key ageing parameters at both the cell and electrode levels.These parameters include available capacity,electrode capacities,and lithium inventory capacity.The proposed method integrates OCV reconstruction models as functional components into convolutional neural networks(CNNs)and is validated using a public dataset.The results reveal that the estimated ageing parameters closely align with those obtained through offline OCV tests,with errors in reconstructed OCV curves remaining within 15 mV.This demonstrates the ability of the method to deliver fast and accurate degradation diagnostics at the electrode level,advancing the potential for precise and efficient battery health management.
文摘Computed tomography is an indispensable X-ray imaging modality used to diagnose numerous pathologies, but it can also involve the delivery of high ionizing radiation doses harmful to the health of patients. This study aims to survey the level of radiation doses delivered to child patients during head exams in CT imaging to set up the Dosimetric Reference Levels (DRLs), a routine dose optimization tool, based on data acquired at the University Hospital of Angré (UHA), the University Hospital of Treichville (UHT) and the Polyclinic Hospital Farah (Farah) for optimizing procedures in Ivorian hospitals. Prospectively performed on 334 CT images of 186 child patients, this study was carried out on CT systems such as Hitachi Scenaria, Sinovision Insitum, and Philips Incisive used respectively at UHA, UHT and Farah. Children’s scan data were classified into four age bands: vol or dose-length product as DLP) value, whatever the hospital, increases with respect to the age of child patients. Based on the 75th percentile of the whole dose distributions, the DRLs of the CTDIvol is 54.37 mGy whatever the age groups and those of the DLP with respect to age bands are 1224.55 mGy∙cm, 1414.06 mGy∙cm, 1632.24 mGy.cm and 1544.57 mGy∙cm, respectively. The averaged values of CTDIvol and DLP smaller than the corresponding DRLs values suggest that practices in our three facilities are optimized. However, comparing our results with those from different international studies, we see that the CTDIvol and DLP values obtained in the present work are higher. These results suggest additional surveys to ensure our DRLs values and efforts from radiologists, imaging technicians and medical physicists to strengthen clinical procedures for the radiation protection of children undergoing CT scans in Côte d’Ivoire.
基金supported by National Key Research and Development Program of China(Grant Nos.2022YFF0800903 and 2024YFC2909905)the National Natural Science Foundation of China(NSFC)(Grant Nos.42261144669,42262026,and 42273073).
文摘Metallogenic research on structural levels can reveal vertical patterns of mineralization and facilitate the deep exploration of economic minerals.However,research focusing on the correlation between structural levels and mineralization remains limited.In this study,we summarize the deformation patterns and associated mineral deposits observed at different crustal levels(i.e.,surface,shallow,middle,and deep structural levels,corresponding to depths of<2,2-8,8-15,and>15 km,respectively).Furthermore,we examine the genetic association between structural levels and metallogenesis,demonstrating that distinct structural levels are linked to specific types of mineralization.Key factors that vary across crustal levels include temperature,pressure,and fluid circulation.Ore-forming processes involve interactions between structures and fluids under varying temperatures and pressures.Structural levels influence mineralization by controlling the temperatures,pressures,and deformation mechanisms that drive the activation,migration,and enrichment of ore-forming materials.
文摘BackgroundIt's crucial to study the effect of changes in thresholds(T)and most comfortable levels(M)on behavioral measurements in young children using cochlear implants.This would help the clinician with the optimization and validation of programming parameters.ObjectiveThe study has attempted to describe the changes in behavioral responses with modification of T and M levels.MethodsTwenty-five participants in the age range 5 to 12 years using HR90K/HiFocus1J or HR90KAdvantage/HiFocus1J with Harmony speech processors participated in the study.A decrease in T levels,a rise in T levels,or a decrease in M levels in the everyday program were used to create experimental programs.Sound field thresholds and speech perception were measured at 50 dBHL for three experimental and everyday programs.ConclusionThe results indicated that only reductions of M levels resulted in significantly(p<0.01)poor aided thresholds and speech perception.On the other hand,variation in T levels did not have significant changes in either sound field thresholds or speech perception.The results highlight that M levels must be correctly established in order to prevent decreased speech perception and audibility.
文摘The purpose of this research was to evaluate radiological safety in pediatric radiology in hospitals in the Kongo Central province of the DRC. To this end, we surveyed a convenience sample of 50 health professionals, including 10 radiologists working in the hospitals covered by the survey, to assess the practice of pediatric radiology and the degree of compliance with radiation protection principles for the safety of children and the environment. We collected radiophysical parameters to calculate entrance doses in pediatric radiology in radiology departments to determine the dosimetric level by comparison with the diagnostic reference levels of the International Commission on Radiological Protection (ICRP). All in all, we found that in Kongo Central in the DRC, many health personnel surveyed reported that more than 30% of requested radiological examinations are not justified. Also, after comparing the entrance doses produced in the surveyed departments with those of the International Commission on Radiological Protection (ICRP), a statistically significant difference was found in pediatric radiology between the average doses in five out of six surveyed departments and those of the ICRP. Therefore, almost all of the surveyed departments were found to be highly irradiating in children, while excessive X-ray irradiation in children can have significant effects due to their increased sensitivity to radiation. Among the risks are: increased cancer risks, damage to developing cells, potential genetic effects, and neurological effects. This is why support for implementing radiation protection principles is a necessity to promote the safety of patients and the environment against the harmful effects of X-rays in conventional radiology.
基金Heilongjiang Provincial Library Work Committee Project“Double First-Class Construction Research on the Development Strategy of Subject Services in University Libraries”(2024-016-B)。
文摘This paper aims to explore the development strategies for subject services in university libraries within the context of the“double first-class”initiative.By examining the relationship between“double first-class”construction and university library subject services,the study analyzes the current state of subject services,including resource development,service models,and team building.Drawing on domestic and international case studies,the paper proposes a series of targeted and practical strategies to enhance the quality of subject services in university libraries,thereby providing robust support for the advancement of the“double first-class”initiative.
文摘This article analyzes the application strategies of Building Information Modeling(BIM)support technology in a first-class highway reconstruction and expansion project based on its actual situation.According to the basic situation of BIM technology and its application goals in this project,it explores application strategies such as BIM model construction,BIM prefabricated structural model deepening and schedule simulation,BIM collision detection,and BIM tunnel pre-construction simulation.Through this analysis,it is hoped to provide a reference for the rational application of BIM support technology and ensure the high-quality and efficient completion of first-class highway reconstruction and expansion projects.
文摘The Thwaites Glacier in western Antarctica(Fig. 1) keeps glaciologists and climate scientists awake at night. The 120 kmwide glacier loses about 45 billion tonnes of ice each year, accounting for about 4% of global sea level rise [1]. If it melted completely, sea levels would climb 65 cm, and follow-on effects could lead to a 3 m increase [2]. But if some scientists' vision becomes reality, in 10–15 years construction crews will sail into the Amundsen Sea off Antarctica to begin building an 80 km long underwater curtain that will shield the glacier from the warm currents that are accelerating its decline [3].
基金supported by the National Natural Science Foundation of China(No.U20A2094)。
文摘Water level is the overriding control on carbon cycles in peatlands,which are important for global carbon cycles and ecosystem services.To date,our knowledge of the pattern of water level fluctuations in peatlands and the influence of precipitation and air temperature on them in the subtropical remains poor.In this study,we conducted continuous high-resolution monitoring of water levels from 2014 to 2021 in the Dajiuhu peatland,a typically subtropical peatland in central China.Monitoring results showed that the water level had strong annual(370 days) and seasonal(130 days) oscillations in the Dajiuhu peatland.The annual oscillation is associated with both precipitation and temperature,while the seasonal oscillation is mainly controlled by precipitation.In addition,the depth of peat surface to the water table(DWT) has weak but significant correlations with precipitation and temperature on the daily and weekly scales(r = 0.1–0.21,p<0.01).Once replacing DWT with water table fluctuation cumulation,the correlation coefficients increase apparently(r = 0.47–0.69,p<0.01),especially on the monthly scale.These findings highlight a more important role of the fluctuation than the mean position of water level and have the potential to improve the interpretation of water-level related paleoenvironmental proxies and the understanding of the relationship between water level and biogeochemical processes.
基金The National Natural Science Foundation of China under contract Nos 61701416 and 61901195Natural Science Foundation of Jiangsu Province of China under contract No.BK20211341China Postdoctoral Science Foundation under contract No.2022M712687.
文摘Separation between water and land is vital for marine scientific research and coastal zone planning and management.The contrasting backscatter properties of land and ocean enable clear water edge line identification in synthetic aperture radar(SAR)imagery.However,SAR images are prone to speckle noise,and the complexity of the water-land boundaries environment makes accurate water-land separation challenging.To overcome noise and complex background interference in remote sensing images,an improved level set method was employed to enhance water-land separation.In the traditional distance regularized level set method,the selection of the image correlation weight coefficient and the edge indicator function directly influences the accuracy of the final segmentation results.A novel level set segmentation algorithm incorporating an improved edge indicator function is proposed to efficiently and accurately separate the water edge lines in SAR images.The distance regularized level set evolution model is enhanced by incorporating the signed pressure force function as an adaptive parameter,which serves as an external constraint for curve evolution.A novel level set model with an adaptive edge indicator function,combining gradient and regional information,is proposed.Experimental results demonstrate that the proposed model enhances the accuracy of waterland separation in SAR images.However,further research is needed to evaluate its potential for detecting boundaries in diverse marine environments and across different types of SAR imagery.
基金National Natural Science Foundation of China(22178228,22178326)
文摘A cylindrical chamber with a rotating bottom holds significant potential for application in cell culture bioreactors due to its ability to generate more stable swirling flows.In order to control vortex breakdown within the chamber,this study first establishes a computational fluid dynamics simulation coupled with the level set method.Verified by experimental results in literature,this method accurately simulates the position and shape of vortex breakdown,and also predicts the critical Reynolds numbers for the appearance and detachment of vortex breakdown bubbles from the center.Additionally,it precisely captures the gas-liquid interface and depicts the vortex breakdown phenomenon in the air above the liquid for the first time.Finally,it predicts the impact of physical property of gas-liquid systems on vortex breakdown in response to significant changes in viscosity of microbial process systems.
基金supported by the National Natural Science Foundation of China(Grant No.12272144).
文摘A data-driven model ofmultiple variable cutting(M-VCUT)level set-based substructure is proposed for the topology optimization of lattice structures.TheM-VCUTlevel setmethod is used to represent substructures,enriching their diversity of configuration while ensuring connectivity.To construct the data-driven model of substructure,a database is prepared by sampling the space of substructures spanned by several substructure prototypes.Then,for each substructure in this database,the stiffness matrix is condensed so that its degrees of freedomare reduced.Thereafter,the data-drivenmodel of substructures is constructed through interpolationwith compactly supported radial basis function(CS-RBF).The inputs of the data-driven model are the design variables of topology optimization,and the outputs are the condensed stiffness matrix and volume of substructures.During the optimization,this data-driven model is used,thus avoiding repeated static condensation that would requiremuch computation time.Several numerical examples are provided to verify the proposed method.
基金supported by the National Natural Science Foundation of China(22305119,12204234)the Natural Science Foundation of Jiangsu Province(BK20220878)+3 种基金the Fundamental Research Funds for the Central Universities(NS2023059)the China Postdoctoral Science Foundation(2022TQ0157,2023M741695)the Liaoning University Talent Introduction Research Startup Project(d295000048)the Center for Microscopy and Analysis of Nanjing University of Aeronautics and Astronautics for characterization support。
文摘The optimization of hole transport layer(HTL)is crucial for achieving high efficiency and stability in inverted perovskite solar cells(PSCs)due to its role in facilitating hole transport and passivating the perovskite bottom interface.While self-assembled monolayers(SAMs)are commonly used for this purpose,the inherent limitations of a single SAM,such as fixed energy levels and rigid structure,restrict their adaptability for different perovskite components and further efficiency enhancement.Here,we demonstrate a stepwise deposition method for SAM-based HTLs to address this issue.We regulated the energy level gradient by depositing two SAMs with distinct energy levels,while the interactions between the phosphate groups in the SAMs and perovskite effectively reduce defect density at the bottom interface of the perovskite film.The as-fabricated PSCs achieved enhanced efficiency and stability with PCEs of 25.7% and 24.0% for rigid and flexible PSCs,respectively;these devices maintain 90% of their initial PCE after 500 h of maximum power point tracking,and retain 98% of their initial PCE after 4,000 bending cycles,representing one of the most stable flexible PSCs reported to date.
文摘The increasing dependence on fossil fuels and the consequent CO_(2)emissions have prompted urgent energy and environmental challenges[1,2].Solar-driven CO_(2)conversion into value-added fuels offers a sustainable and promising solution to these issues[3].However,the practical implementation of CO_(2)photoreduction is constrained by low efficiency,primarily due to the rapid recombination of photogenerated electron-hole pairs[4].
基金supported by Malaysia's Ministry of Higher Education through the Fundamental Research Grant Scheme(FRGS)under the reference code FRGS/1/2020/SS0/UMT/02/3 and vote number 59637.
文摘Objective:To explore the associations between income levels,employment risk,lifestyles,occupational stress,and male fertility.Methods:This cross-sectional study analyzed 294 men seeking fertility treatment at fertility clinics in Terengganu,Pahang,and Kuala Lumpur from November 2021 to June 2023.Data were collected through structured questionnaires covering income levels,lifestyles,employment risks,occupational stress,and semen quality.Multinomial logistic regression was employed to assess predictors of semen quality,with crude and adjusted odds ratios(OR)reported.Results:The lower-income group exhibited higher odds of having abnormal semen quality compared to normal semen quality.Specifically,these participants were more likely to experience azoospermia[crude OR 6.68,95%confidence interval(CI)1.84-52.63;adjusted OR 6.26,95%CI 1.76-51.38],indicating a link between low income and infertility issues.Lifestyle factors did not show significant associations with semen abnormalities after adjustment.High employment risks had significant associations with oligozoospermia after adjustment(crude OR 5.50,95%CI 2.14-14.11;adjusted OR 5.15,95%CI 1.93-13.71),while high occupational stress was linked to asthenozoospermia(crude OR 2.26,95%CI 1.09-4.68;adjusted OR 2.25,95%CI 1.07-4.69).Conclusions:The findings underscore the influence of socioeconomic and occupational factors on male fertility,showing associations between lower income levels,high-risk occupations,and semen abnormalities.In contrast,lifestyle factors did not show significant associations with semen abnormalities after adjustment.Nevertheless,the current findings should be further confirmed through more extensive studies focusing on abnormal semen and lifestyle factors.
基金funded by the University of Science,VNU-HCM under grant number T2022-10 project entitled“Water level variability in the Mekong Delta under the impacts of anthropogenic and climatic factors”.
文摘In recent years,the water level in the Mekong Delta(MD)has undergone changes,attributed to the impacts of anthropogenic activities and climate change.Declining water levels have had implications for various aspects of life and aquatic ecosystems in the lower basin water bodies.Analyzing long-term trends in rainfall and water levels is crucial for enhancing our understanding.This study aims to examine the evolving patterns of water level and rainfall in the region.Data on water levels and rainfall from observation stations were gathered from the National Center for Hydrometeorological Forecasting,Vietnam,spanning from 2000 to 2014.The assessment of homogeneity and identification of trend changes were conducted using the Standard Normal Homogeneity Test(SNHT)and the Mann-Kendall test.The results indicate that changes in water levels at the Tan Chau and Chau Doc stations have been observed since 2010 due to the operation of flow-regulating structures in the upper Mekong River.Following the commencement of upstream dam operations,the water level at the headwater stations of the Mekong River has been higher than the long-term average during the dry season and lower than the average during the flood season.The study findings highlight the influence of altered rainfall patterns under the impact of climate variability(ICC)on water level trends in the study area.While rainfall plays a significant role in increasing water levels during the flood season,the operation of hydropower dams(UHDs)stands out as the primary factor driving water level reductions in the study area.
基金funded by the National Natural Science Foundation of China[Grant No.71963030]a subproject of China’s third comprehensive scientific expedition to Xinjiang[Grant No.SQ2021xjkk01800]+1 种基金a major science and technology project in the Xinjiang Uygur Autonomous Region[Grant No.2022A01003]a scientific research innovation project for excellent doctoral students of Xinjiang University[Grant No.XJU2022BS010].
文摘Ensuring a harmonious coexistence between man and nature is crucial for China’s economic and social development.However,with increasing industrialization and urbanization,there is a growing mismatch between China’s ecological resilience(ER)and economic level(EL)of development,which poses a notable social threat.Currently,the link between ER and EL in China remains unclear,especially in terms of spatial dislocation(SD),referring to the disconnect between the locations where environmental impacts occur and those where economic benefits or activities are concentrated.Therefore,this paper aims to provide theoretical support and an empirical basis for policy-based solutions to address this gap.Based on the SD theory,this study systematically discusses the temporal changes,spatial patterns,and SD characteristics of China’s ER and EL using spatial auto-correlation and barycentric analysis to analyze data from 30 provinces covering the period 2011-2021.The key results are as follows.China’s ER shows a general trend of growth;however,its distribution is uneven.The spatial pattern generally decreases from the southeastern coastal provinces to the northwest.Moreover,a gradually increasing positive correlation is observed between the ER and EL,but this correlation varies by region,with some showing regional linkages and others developing independently.Finally,the dislocation index of ER and EL presents divergent results based on region-the eastern and central regions primarily show a high level of dislocation,whereas the western and northeastern regions show a low level of dislocation.The results provide a comprehensive overview of the spatiotemporal patterns in the association between ER and EL in China.The results emphasize that to balance sustainable regional development and ecological governance,a region-specific approach must be employed,prioritizing innovation-driven strategies for high ER in more developed regions and market-oriented strategies in less developed regions.
