The problem for calculating EM energy absorption by lossy dielectric scatterer ir-radiated by plane wave are discussed.The factors affecting the accuracy of computation arediscussed.The calculated results of EM energy...The problem for calculating EM energy absorption by lossy dielectric scatterer ir-radiated by plane wave are discussed.The factors affecting the accuracy of computation arediscussed.The calculated results of EM energy absorption and its distribution in homogeneousand layered homogenous lossy dielectric spheres are presented,and a comparison of these resultswith analytical solution is given.The calculation is carried out for dielectric cylinder on conduct-ing ground as well,and the results are compared with the image theory.All the computationsshew that the finite-difference time-domain method can give satisfactory results.展开更多
An efficient conformal locally one-dimensional finite-difference time-domain（LOD-CFDTD） method is presented for solving two-dimensional（2D） electromagnetic（EM） scattering problems. The formulation for the 2D tra...An efficient conformal locally one-dimensional finite-difference time-domain（LOD-CFDTD） method is presented for solving two-dimensional（2D） electromagnetic（EM） scattering problems. The formulation for the 2D transverse-electric（TE） case is presented and its stability property and numerical dispersion relationship are theoretically investigated. It is shown that the introduction of irregular grids will not damage the numerical stability. Instead of the staircasing approximation, the conformal scheme is only employed to model the curve boundaries, whereas the standard Yee grids are used for the remaining regions. As the irregular grids account for a very small percentage of the total space grids, the conformal scheme has little effect on the numerical dispersion. Moreover, the proposed method, which requires fewer arithmetic operations than the alternating-direction-implicit（ADI） CFDTD method, leads to a further reduction of the CPU time. With the total-field/scattered-field（TF/SF） boundary and the perfectly matched layer（PML）, the radar cross section（RCS） of two2 D structures is calculated. The numerical examples verify the accuracy and efficiency of the proposed method.展开更多
The piecewise linear recursive convolution （PLRC） finite-different time-domain （FDTD） method improves accuracy over the original recursive convolution （RC） FDTD approach and current density convolution （JEC） b...The piecewise linear recursive convolution （PLRC） finite-different time-domain （FDTD） method improves accuracy over the original recursive convolution （RC） FDTD approach and current density convolution （JEC） but retains their advantages in speed and efficiency. This paper describes a revised piecewise linear recursive convolution PLRC-FDTD formulation for magnetized plasma which incorporates both anisotropy and frequency dispersion at the same time, enabling the transient analysis of magnetized plasma media. The technique is illustrated by numerical simulations of the reflection and transmission coefficients through a magnetized plasma layer. The results show that the revised PLRC-FDTD method has improved the accuracy over the original RC FDTD method and JEC FDTD method.展开更多
In order to eliminate Courant-Friedrich-Levy(CFL) condition restraint and improvecomputational efficiency,a new finite-difference time-domain(FDTD)method based on the alternating-direction implicit(ADI) technique is i...In order to eliminate Courant-Friedrich-Levy(CFL) condition restraint and improvecomputational efficiency,a new finite-difference time-domain(FDTD)method based on the alternating-direction implicit(ADI) technique is introduced recently.In this paper,a theoretical proof of the stabilityof the three-dimensional(3-D)ADI-FDTD method is presented.It is shown that the 3-D ADI-FDTDmethod is unconditionally stable and free from the CFL condition restraint.展开更多
This paper proposes a hybrid full-wave analysis using Finite-Difference Time-Domain (FDTD) and Wave Concept Iterative Process (WCIP) methods, developed to analyze locally arbitrarily shaped microwave structures and Mu...This paper proposes a hybrid full-wave analysis using Finite-Difference Time-Domain (FDTD) and Wave Concept Iterative Process (WCIP) methods, developed to analyze locally arbitrarily shaped microwave structures and Multilayer Planar structure. Using the equivalence principle, the original problem can be decomposed into two sub regions and solve each sub region separately. An interpolation scheme is proposed for communicating between the FDTD fields and WCIP wave, which will not require the effort of fitting the WCIP mesh to the FDTD cells in the interface region. This method is applied to calculate the scattering parameters of arbitrary (3-D) microwave structures. Applying FDTD to 3D discontinuity and WCIP to the remaining region preserves the advantages of both WCIP flexibility and FDTD efficiency. A comparison of the results with the FDTD staircasing data verifies the accuracy of the proposed method.展开更多
Objective In order to find early latent faults and prevent catastrophic failures, diagnosis of insulation condition by measuring technique of partial discharge(PD) in gas insulated switchgear (GIS) is applied in this ...Objective In order to find early latent faults and prevent catastrophic failures, diagnosis of insulation condition by measuring technique of partial discharge(PD) in gas insulated switchgear (GIS) is applied in this paper, which is one of the most basic ways for diagnosis of insulation condition. Methods Ultra high frequency(UHF) PD detection method by using internal sensors has been proved efficient, because it may avoid the disturbance of corona, but the sensor installation of this method will be limited by the structure and operation condition of GIS. There are some of electromagnetic (E-M) waves leak from the place of insulation spacer, therefore, the external sensors UHF measuring PD technique is applied, which isn't limited by the operation condition of GIS. Results This paper analyzes propagated electromagnetic (E-M) waves of partial discharge pulse excited by using the finite-difference time-domain (FDTD) method. The signal collected at the outer point is more complex than that of the inner point, and the signals' amplitude of outer is about half of the inner, because it propagates through spacer and insulation slot. Set up UHF PD measuring system. The typical PD in 252kV GIS bus bar was measured using PD detection UHF technique with external sensors. Finally, compare the results of UHF measuring technique using external sensors with the results of FDTD method simulation and the traditional IEC60270 method detection. Conclusion The results of experiment shows that the UHF technique can realize the diagnosis of insulation condition, the results of FDTD method simulation and the result UHF method detection can demonstrate each other, which gives references to further researches and application for UHF PD measuring technique.展开更多
The analysis of electromagnetic propagation in a dispersive medium is complicated in the time-domain because its dielectric constant is frequency-dependent. In this paper, the dielectric constant of the dispersive med...The analysis of electromagnetic propagation in a dispersive medium is complicated in the time-domain because its dielectric constant is frequency-dependent. In this paper, the dielectric constant of the dispersive medium is written as a rational polynomial function, and the relationship between D and E is derived in the time-domain. It is referred to as the shift operator finite-different time-domain （SO-FDTD） method. Compared to an analytical solution and a piecewise linear current density recursive convolution （PLJERC） solution, the high accuracy and efl%iency of this method is verified by calculating the reflectance of the electromagnetic wave through a cold plasma slab. As the electron density in plasma is distributed as the Epstein formula, the effect of distribution grads and electron collision frequency on the reflectance is calculated by using the SO-FDTD method. The result shows that the increase in the distribution grads coefficient affects the reflectance sharply. When it comes to a smaller distribution grads coelBcient, the increase of the collision frequency showed a significant effect on the reflectance, but on the contrary, there is actually less and less effect till it disappears.展开更多
The characteristics of a cylindrical conformal microstrip patch antenna are analyzed by using the characteristic-based time domain （CBTD） method. A governing equation in the cylindrical coordinate system is formulat...The characteristics of a cylindrical conformal microstrip patch antenna are analyzed by using the characteristic-based time domain （CBTD） method. A governing equation in the cylindrical coordinate system is formulated directly to facilitate the analysis of cylindrically conformal microstrip patch antennas. The algorithm has second-order accuracy both in time and space domain and has the potential to eliminate the spurious wave reflection from the numerical boundaries of the computational domain, Numerical results demonstrate the important merits and accuracy of the proposed technique in computational electromagnetics,展开更多
The objective of this paper is to design a microstrip patch antenna for the miniature electro-capsule communicating with external recorder at 915MHz located in Industry, Science, and Medical (ISM) bands. Microstrip an...The objective of this paper is to design a microstrip patch antenna for the miniature electro-capsule communicating with external recorder at 915MHz located in Industry, Science, and Medical (ISM) bands. Microstrip antenna design parameters, resonance characteristics and radiation patterns are evaluated using the finite-difference time-domain (FDTD) method. The effects of location of feed point and human body are analyzed, and the radiation performances of the proposed antenna are estimated in terms of radiation patterns. Finally, specific absorption rate (SAR) computations are also performed, and the peak 1-g and 10-g SAR values are calculated. According to peak SAR values, the maximum delivered power for the designed antenna was found so that the SAR values of the antennas satisfy ANSI limitations.展开更多
Electromagnetic bandgap （EBG） materials are periodic structures capable of prohibiting the propagation of electromagnetic waves within a certain band of frequencies. This characteristic of EBG has wide application. ...Electromagnetic bandgap （EBG） materials are periodic structures capable of prohibiting the propagation of electromagnetic waves within a certain band of frequencies. This characteristic of EBG has wide application. The structures to be studied here are mainly planar EBG materials of two dimensions, which are periodic arrays of holes etched in the ground plane of a conventional microstrip line. EBG structures are calculated with finite-difference time-domain （FDTD） method in this paper. Technique of the perfectly matched layer is used for the absorption of electromagnetic waves in FDTD. The FDTD method is programmed with the blend of C++ and Matlab languages, which makes the program both simple and fast computing. A kind of new EBG structure is brought out through a lot of experiments and analyses. A filter with wide stop-band and another filter with two stop-bands are designed.展开更多
Modeling technique for electromagnetic fields excited by antennas is an important topic in computational electromagnetics, which is concerned with the numerical solution of Maxwell's equations. In this paper, a no...Modeling technique for electromagnetic fields excited by antennas is an important topic in computational electromagnetics, which is concerned with the numerical solution of Maxwell's equations. In this paper, a novel hybrid technique that combines method of moments(MoM) with finite-difference time-domain(FDTD) method is presented to handle the problem. This approach employed Huygen's principle to realize the hybridization of the two classical numerical algorithms. For wideband electromagnetic data, the interpolation scheme is used in the MoM based on the dyadic Green's function. On the other hand, with the help of equivalence principle, the scattered electric and magnetic fields on the Huygen's surface calculated by MoM are taken as the sources for FDTD. Therefore, the electromagnetic fields in the environment can be obtained by employing finite-difference time-domain method. Finally, numerical results show the validity of the proposed technique by analyzing two canonical samples.展开更多
Indentations etched on the output surface of a metallic mask are proposed to produce fine lithographic patterns with a resolution of 500 nm using the finite-difference time domain （FDTD） method. Such a designed mask...Indentations etched on the output surface of a metallic mask are proposed to produce fine lithographic patterns with a resolution of 500 nm using the finite-difference time domain （FDTD） method. Such a designed mask is capable of enhancing near field lithography （NFL） resolution more than three times compared with the structure without indentations. The simulation results show that the interference disturbance between the adjacent lithographic channels can be eliminated efficiently by employing the indentations. As a straightforward consequence, the channel-to-channel interspaces can be shortened significantly, maintaining a uniform field distribution and high contrast.展开更多
Because the conventional ultra wideband（UWB） radar imaging algorithm cannot meet the demand in the capability of multiple targets detection,a novel UWB radar imaging algorithm based on the near field radiation theor...Because the conventional ultra wideband（UWB） radar imaging algorithm cannot meet the demand in the capability of multiple targets detection,a novel UWB radar imaging algorithm based on the near field radiation theory of dipole is presented.On the foundation of researching the principle of a time domain imaging algorithm,the back projection（BP） algorithm is derived and analyzed.Firstly,the far field sampling data are transferred to the near field sampling data by using the near field radiation theory of dipole.Then the BP algorithm is applied to target detection.The capability of the new algorithm to detect the multi-target is verified by using the finite-difference time-domain method,and the threedimensional images of targets are obtained.The coupling effect between targets for imaging is analyzed.The simulation results show that the new UWB radar imaging algorithm based on the near field radiation theory of dipole could weaken the coupling effect for imaging,and as a result the quality of imaging is improved.展开更多
文摘The problem for calculating EM energy absorption by lossy dielectric scatterer ir-radiated by plane wave are discussed.The factors affecting the accuracy of computation arediscussed.The calculated results of EM energy absorption and its distribution in homogeneousand layered homogenous lossy dielectric spheres are presented,and a comparison of these resultswith analytical solution is given.The calculation is carried out for dielectric cylinder on conduct-ing ground as well,and the results are compared with the image theory.All the computationsshew that the finite-difference time-domain method can give satisfactory results.
基金supported by the National Natural Science Foundation of China(Grant Nos.61331007 and 61471105)
文摘An efficient conformal locally one-dimensional finite-difference time-domain（LOD-CFDTD） method is presented for solving two-dimensional（2D） electromagnetic（EM） scattering problems. The formulation for the 2D transverse-electric（TE） case is presented and its stability property and numerical dispersion relationship are theoretically investigated. It is shown that the introduction of irregular grids will not damage the numerical stability. Instead of the staircasing approximation, the conformal scheme is only employed to model the curve boundaries, whereas the standard Yee grids are used for the remaining regions. As the irregular grids account for a very small percentage of the total space grids, the conformal scheme has little effect on the numerical dispersion. Moreover, the proposed method, which requires fewer arithmetic operations than the alternating-direction-implicit（ADI） CFDTD method, leads to a further reduction of the CPU time. With the total-field/scattered-field（TF/SF） boundary and the perfectly matched layer（PML）, the radar cross section（RCS） of two2 D structures is calculated. The numerical examples verify the accuracy and efficiency of the proposed method.
基金National Natural Science Foundation of China (No. 60471002) and the Natural Science Foundation ofJiangxi Province (No. 0412014)
文摘The piecewise linear recursive convolution （PLRC） finite-different time-domain （FDTD） method improves accuracy over the original recursive convolution （RC） FDTD approach and current density convolution （JEC） but retains their advantages in speed and efficiency. This paper describes a revised piecewise linear recursive convolution PLRC-FDTD formulation for magnetized plasma which incorporates both anisotropy and frequency dispersion at the same time, enabling the transient analysis of magnetized plasma media. The technique is illustrated by numerical simulations of the reflection and transmission coefficients through a magnetized plasma layer. The results show that the revised PLRC-FDTD method has improved the accuracy over the original RC FDTD method and JEC FDTD method.
基金Supported by the Specialized Research Fund for the Doctoral Program of Higher Education(No.20010614003)
文摘In order to eliminate Courant-Friedrich-Levy(CFL) condition restraint and improvecomputational efficiency,a new finite-difference time-domain(FDTD)method based on the alternating-direction implicit(ADI) technique is introduced recently.In this paper,a theoretical proof of the stabilityof the three-dimensional(3-D)ADI-FDTD method is presented.It is shown that the 3-D ADI-FDTDmethod is unconditionally stable and free from the CFL condition restraint.
文摘This paper proposes a hybrid full-wave analysis using Finite-Difference Time-Domain (FDTD) and Wave Concept Iterative Process (WCIP) methods, developed to analyze locally arbitrarily shaped microwave structures and Multilayer Planar structure. Using the equivalence principle, the original problem can be decomposed into two sub regions and solve each sub region separately. An interpolation scheme is proposed for communicating between the FDTD fields and WCIP wave, which will not require the effort of fitting the WCIP mesh to the FDTD cells in the interface region. This method is applied to calculate the scattering parameters of arbitrary (3-D) microwave structures. Applying FDTD to 3D discontinuity and WCIP to the remaining region preserves the advantages of both WCIP flexibility and FDTD efficiency. A comparison of the results with the FDTD staircasing data verifies the accuracy of the proposed method.
文摘Objective In order to find early latent faults and prevent catastrophic failures, diagnosis of insulation condition by measuring technique of partial discharge(PD) in gas insulated switchgear (GIS) is applied in this paper, which is one of the most basic ways for diagnosis of insulation condition. Methods Ultra high frequency(UHF) PD detection method by using internal sensors has been proved efficient, because it may avoid the disturbance of corona, but the sensor installation of this method will be limited by the structure and operation condition of GIS. There are some of electromagnetic (E-M) waves leak from the place of insulation spacer, therefore, the external sensors UHF measuring PD technique is applied, which isn't limited by the operation condition of GIS. Results This paper analyzes propagated electromagnetic (E-M) waves of partial discharge pulse excited by using the finite-difference time-domain (FDTD) method. The signal collected at the outer point is more complex than that of the inner point, and the signals' amplitude of outer is about half of the inner, because it propagates through spacer and insulation slot. Set up UHF PD measuring system. The typical PD in 252kV GIS bus bar was measured using PD detection UHF technique with external sensors. Finally, compare the results of UHF measuring technique using external sensors with the results of FDTD method simulation and the traditional IEC60270 method detection. Conclusion The results of experiment shows that the UHF technique can realize the diagnosis of insulation condition, the results of FDTD method simulation and the result UHF method detection can demonstrate each other, which gives references to further researches and application for UHF PD measuring technique.
基金supported by National Natural Science Foundation of China(Nos.60271005 and 60431010)the National Science Fund for Distinguished Young Scholars of China(No.60325103)
文摘The analysis of electromagnetic propagation in a dispersive medium is complicated in the time-domain because its dielectric constant is frequency-dependent. In this paper, the dielectric constant of the dispersive medium is written as a rational polynomial function, and the relationship between D and E is derived in the time-domain. It is referred to as the shift operator finite-different time-domain （SO-FDTD） method. Compared to an analytical solution and a piecewise linear current density recursive convolution （PLJERC） solution, the high accuracy and efl%iency of this method is verified by calculating the reflectance of the electromagnetic wave through a cold plasma slab. As the electron density in plasma is distributed as the Epstein formula, the effect of distribution grads and electron collision frequency on the reflectance is calculated by using the SO-FDTD method. The result shows that the increase in the distribution grads coefficient affects the reflectance sharply. When it comes to a smaller distribution grads coelBcient, the increase of the collision frequency showed a significant effect on the reflectance, but on the contrary, there is actually less and less effect till it disappears.
文摘The characteristics of a cylindrical conformal microstrip patch antenna are analyzed by using the characteristic-based time domain （CBTD） method. A governing equation in the cylindrical coordinate system is formulated directly to facilitate the analysis of cylindrically conformal microstrip patch antennas. The algorithm has second-order accuracy both in time and space domain and has the potential to eliminate the spurious wave reflection from the numerical boundaries of the computational domain, Numerical results demonstrate the important merits and accuracy of the proposed technique in computational electromagnetics,
文摘The objective of this paper is to design a microstrip patch antenna for the miniature electro-capsule communicating with external recorder at 915MHz located in Industry, Science, and Medical (ISM) bands. Microstrip antenna design parameters, resonance characteristics and radiation patterns are evaluated using the finite-difference time-domain (FDTD) method. The effects of location of feed point and human body are analyzed, and the radiation performances of the proposed antenna are estimated in terms of radiation patterns. Finally, specific absorption rate (SAR) computations are also performed, and the peak 1-g and 10-g SAR values are calculated. According to peak SAR values, the maximum delivered power for the designed antenna was found so that the SAR values of the antennas satisfy ANSI limitations.
文摘Electromagnetic bandgap （EBG） materials are periodic structures capable of prohibiting the propagation of electromagnetic waves within a certain band of frequencies. This characteristic of EBG has wide application. The structures to be studied here are mainly planar EBG materials of two dimensions, which are periodic arrays of holes etched in the ground plane of a conventional microstrip line. EBG structures are calculated with finite-difference time-domain （FDTD） method in this paper. Technique of the perfectly matched layer is used for the absorption of electromagnetic waves in FDTD. The FDTD method is programmed with the blend of C++ and Matlab languages, which makes the program both simple and fast computing. A kind of new EBG structure is brought out through a lot of experiments and analyses. A filter with wide stop-band and another filter with two stop-bands are designed.
基金Supported in part by China Postdoctoral Science Foundation under Grant No.201M550839in part by the Key Research Program of the Chinese Academy of Sciences under Grant No.KGZD-EW-603
文摘Modeling technique for electromagnetic fields excited by antennas is an important topic in computational electromagnetics, which is concerned with the numerical solution of Maxwell's equations. In this paper, a novel hybrid technique that combines method of moments(MoM) with finite-difference time-domain(FDTD) method is presented to handle the problem. This approach employed Huygen's principle to realize the hybridization of the two classical numerical algorithms. For wideband electromagnetic data, the interpolation scheme is used in the MoM based on the dyadic Green's function. On the other hand, with the help of equivalence principle, the scattered electric and magnetic fields on the Huygen's surface calculated by MoM are taken as the sources for FDTD. Therefore, the electromagnetic fields in the environment can be obtained by employing finite-difference time-domain method. Finally, numerical results show the validity of the proposed technique by analyzing two canonical samples.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10974025)
文摘Indentations etched on the output surface of a metallic mask are proposed to produce fine lithographic patterns with a resolution of 500 nm using the finite-difference time domain （FDTD） method. Such a designed mask is capable of enhancing near field lithography （NFL） resolution more than three times compared with the structure without indentations. The simulation results show that the interference disturbance between the adjacent lithographic channels can be eliminated efficiently by employing the indentations. As a straightforward consequence, the channel-to-channel interspaces can be shortened significantly, maintaining a uniform field distribution and high contrast.
基金supported by the Key Laboratory of Millimeter Waves of China (K200907)
文摘Because the conventional ultra wideband（UWB） radar imaging algorithm cannot meet the demand in the capability of multiple targets detection,a novel UWB radar imaging algorithm based on the near field radiation theory of dipole is presented.On the foundation of researching the principle of a time domain imaging algorithm,the back projection（BP） algorithm is derived and analyzed.Firstly,the far field sampling data are transferred to the near field sampling data by using the near field radiation theory of dipole.Then the BP algorithm is applied to target detection.The capability of the new algorithm to detect the multi-target is verified by using the finite-difference time-domain method,and the threedimensional images of targets are obtained.The coupling effect between targets for imaging is analyzed.The simulation results show that the new UWB radar imaging algorithm based on the near field radiation theory of dipole could weaken the coupling effect for imaging,and as a result the quality of imaging is improved.
