We derive the potential energy of gravity waves(GWs)in the upper troposphere and stratosphere at 45°S-45°N from December 2019 to November 2022 by using temperature profiles retrieved from the Constellation O...We derive the potential energy of gravity waves(GWs)in the upper troposphere and stratosphere at 45°S-45°N from December 2019 to November 2022 by using temperature profiles retrieved from the Constellation Observing System for Meteorology,Ionosphere,and Climate-2(COSMIC-2)satellite.Owing to the dense sampling of COSMIC-2,in addition to the strong peaks of gravity wave potential energy(GWPE)above the Andes and Tibetan Plateau,we found weak peaks above the Rocky,Atlas,Caucasus,and Tianshan Mountains.The land-sea contrast is responsible for the longitudinal variations of the GWPE in the lower and upper stratosphere.At 40°N/S,the peaks were mainly above the topographic regions during the winter.At 20°N/S,the peaks were a slight distance away from the topographic regions and might be the combined effect of nontopographic GWs and mountain waves.Near the Equator,the peaks were mainly above the regions with the lowest sea level altitude and may have resulted from convection.Our results indicate that even above the local regions with lower sea level altitudes compared with the Andes and Tibetan Plateau,the GWPE also exhibits fine structures in geographic distributions.We found that dissipation layers above the tropopause jet provide the body force to generate secondary waves in the upper stratosphere,especially during the winter months of each hemisphere and at latitudes of greater than 20°N/S.展开更多
The microphase separation extent of biomedical segmented polyetherurethanes were greatly enhanced due to the presence of sulfoalkyl pendant groups contained in the hard segments,and the hard segments were more orderly...The microphase separation extent of biomedical segmented polyetherurethanes were greatly enhanced due to the presence of sulfoalkyl pendant groups contained in the hard segments,and the hard segments were more orderly aggregated through ionic interaction.展开更多
Seventy-one occurrences of coronal mass ejections （CMEs） associated with radio bursts, seemingly associated with type III bursts/fine structures （FSs）, in the centimeter-metric frequency range during 2003-2005, we...Seventy-one occurrences of coronal mass ejections （CMEs） associated with radio bursts, seemingly associated with type III bursts/fine structures （FSs）, in the centimeter-metric frequency range during 2003-2005, were obtained with the spectrometers at the National Astronomical Observatories, Chinese Academy of Sciences （NAOC） and the Culgoora radio spectrometer and are presented. The statistical results of 68 out of 71 events associated with the radio type III bursts or FSs during the initiation or early stages of the CMEs indicate that most CMEs contain the emissions of radio type III bursts/FSs near the time of the CME＇s onset, in spite of their fast or slow speeds. Therefore, we propose that type III bursts and FSs are possible precursors of the onset of CMEs. We stress that the radio type III bursts/FSs in the centimetermetric wavelength region and the CME transients possibly occurred in conjunction with the origin of the coronal precursor structures. Thus, the statistical results support the suggestions that type III bursts/FSs are indicators of extra energy input into the corona at the CMEs＇ onset, and that the type III bursts/FSs are produced primarily due to a coronal instability which eventually triggers the CME process. This may signify that the centimeter-metric radio bursts corresponding to or near the CME＇s onset are caused by the disturbed corona （possibly including minor magnetic reconnections）.展开更多
The fine and hyperfine structures of pionic helium metastable states is calculated within the formalism of the Breit-Pauli Hamiltonian by using the variationally generated wave functions in Hylleraas coordinates.Our r...The fine and hyperfine structures of pionic helium metastable states is calculated within the formalism of the Breit-Pauli Hamiltonian by using the variationally generated wave functions in Hylleraas coordinates.Our results not only verify the existing values of Hori et al.[Phys.Rev.A 89,042515(2014)]for the fine structure of π^(4)He^(+),but also determine the hyperfine structure of π^(3)He^(+).展开更多
The characteristic of interface depending on the atomic structure exerts an inportant,and sometime controlling,influence on performance of the interacial materials. The present paper reviews the main studies on fine s...The characteristic of interface depending on the atomic structure exerts an inportant,and sometime controlling,influence on performance of the interacial materials. The present paper reviews the main studies on fine structure of both the materials inter- faces and interfacial reaction products in semiconductor uperlattice,metal multilayer ceram- ics and composite materials by mean of selected area electron doffraction patterns and high resolution electron microscopy. The following features of interfaces are reviewed:the orientation relationships;the char- acteristic of steps,facets and ronghness of interfaces;atomic bonding across the interface;the degree of coherency,the structure of misfit dislocations and elastic relaxations at the inter- faces:the presence of defects at the onterfaces:the structure of the interfacial reaction prod- ucts as well as the reaction kinetics and reaetion mechanism.展开更多
Although fine equiaxed structure benefits both strength and ductility in titanium alloys,it is often considered incompatible with high toughness,for its insufficient ability to deflect propagating cracks compared to c...Although fine equiaxed structure benefits both strength and ductility in titanium alloys,it is often considered incompatible with high toughness,for its insufficient ability to deflect propagating cracks compared to coarse lamellar structure.This work reports an excellent combination of standard Charpy impact toughness(∼100 J)and yield strength(∼820 MPa)in a powder metallurgy titanium alloy with fine equiaxed structure(∼1.5μm),wherein the β matrix exists as equiaxed nodules and fine ligaments for globularization of α grains.The impact curve divided with the“compliance changing rate”(CCR)method indicates that the energy consumed by crack propagation is dominant(∼82%)during the impact process.Fractographic and structural examinations indicate that multiple micro-voids nucleation near boundaries between fine β ligaments and α grains mitigates local stress concentration,and that coordinated deformation between equiaxed β nodules and α grains hinders crack propagation,which together enable the excellent combination of yield strength and impact toughness.Our work provides a new pathway for designing impact-resistant titanium alloys.展开更多
The layout and characteristics of the hard X-ray spectroscopy beamline(BL11B)at the Shanghai synchrotron radiation facility are described herein.BL11B is a bending-magnet beamline dedicated to conventional and millise...The layout and characteristics of the hard X-ray spectroscopy beamline(BL11B)at the Shanghai synchrotron radiation facility are described herein.BL11B is a bending-magnet beamline dedicated to conventional and millisecond-scale quick-scanning X-ray absorption fine structures.It is equipped with a cylindrical collimating mirror,a double-crystal monochromator comprising Si(111)and Si(311),a channel-cut quick-scanning Si(111)monochromator,a toroidal focusing mirror,and a high harmonics rejection mirror.It can provide 5-30 keV of X-rays with a photon flux of~5×10^(11)photons/s and an energy resolution of~1.31×10^(-4)at 10 keV.The performance of the beamline can satisfy the demands of users in the fields of catalysis,materials,and environmental science.This paper presents an overview of the beamline design and a detailed description of its performance and capabilities.展开更多
A cluster model is used to calculate electron energy-loss fine structures in crystal. The multiple-scattering self-consistent-field method is employed in the calculation. Our theoretical results of N near K-edge energ...A cluster model is used to calculate electron energy-loss fine structures in crystal. The multiple-scattering self-consistent-field method is employed in the calculation. Our theoretical results of N near K-edge energy loss fine structures in hexagonal GaN crystal are in good agreement with the experimental spectra. Future possible experiments in energy-filtered transmission electron microscopy (EFTEM) are discussed and proposed because our theoretical work can provide clear assignments for transmitted electrons with different energy losses.展开更多
Denote by SFin（v） the set of all integer pairs （t, s） for which there exist three symmetric Latin squares of order v on the same set having fine structure （t, s）. We completely determine the set SFin（2n） for a...Denote by SFin（v） the set of all integer pairs （t, s） for which there exist three symmetric Latin squares of order v on the same set having fine structure （t, s）. We completely determine the set SFin（2n） for any integer n ≥ 5.展开更多
Fine structure and elemental composition of envelopes of 10 taxa of Trachelomonas and Strombomonas from natural freshwater bodies in China were studied and phylogeny of both genera were discussed. The results indicate...Fine structure and elemental composition of envelopes of 10 taxa of Trachelomonas and Strombomonas from natural freshwater bodies in China were studied and phylogeny of both genera were discussed. The results indicate that iron (Fe) and silicon (Si) are the primary mineral elements of the envelopes. Composition of mineral elements was uncorrelated with envelope color, however, it was highly correlated with the microarchitecture of the envelopes. Content of Si was higher than that of Fe in all species of Strombomonas and some species of Trachelomonas with rough surface. In most species of Trachelomonas, especially those with dense and smoothy surface, content of Fe was higher than that of Si. Based on the above results, we propose to assign those species of Strombomonas into Trachelomonas and consider them as a group of the latter. These species were the most primitive among the group with envelopes in Euglenaceae.展开更多
Shock wave/boundary layer interaction(SWBLI)is still one of the unresolved bottlenecks that restrict the development of more advanced flight vehicles.Supersonic forward-facing step(FFS),an extreme case of compression ...Shock wave/boundary layer interaction(SWBLI)is still one of the unresolved bottlenecks that restrict the development of more advanced flight vehicles.Supersonic forward-facing step(FFS),an extreme case of compression ramp,often occurs severe SWBLIs with a large separation bubble.In this paper,experimental investigations on vortical structures and density fluctuations characteristics of supersonic FFS controlled by self-sustaining dual synthetic jets(SDSJ)are carried out in a Mach number 2.95 wind tunnel.High spatial–temporal resolution flowfield images of FFS without/with active flow control are captured by adopting nano-particle-based planar laser scattering technique.The control effects of the distance between the actuator and the step are mainly compared.The paper finds that the SDSJ can effectively change the feature of flowfield,eliminate the separation shock and the reattachment shock,compel the original shock induced by the step leading edge to distort and reduce its intensity finally.Density fluctuations analysis demonstrates that the whole flows seem to move upstream with the increase of distance(dS-J).Discrete Fourier transformation spectrums results reveal that the fluctuations are mainly located in the low-frequency region at first.High-frequency components and frequency bandwidth increase slightly after the SDSJ are applied.展开更多
This paper aims to develop a nonrigid registration method of preoperative and intraoperative thoracoabdominal CT images in computer-assisted interventional surgeries for accurate tumor localization and tissue visualiz...This paper aims to develop a nonrigid registration method of preoperative and intraoperative thoracoabdominal CT images in computer-assisted interventional surgeries for accurate tumor localization and tissue visualization enhancement.However,fine structure registration of complex thoracoabdominal organs and large deformation registration caused by respiratory motion is challenging.To deal with this problem,we propose a 3D multi-scale attention VoxelMorph(MAVoxelMorph)registration network.To alleviate the large deformation problem,a multi-scale axial attention mechanism is utilized by using a residual dilated pyramid pooling for multi-scale feature extraction,and position-aware axial attention for long-distance dependencies between pixels capture.To further improve the large deformation and fine structure registration results,a multi-scale context channel attention mechanism is employed utilizing content information via adjacent encoding layers.Our method was evaluated on four public lung datasets(DIR-Lab dataset,Creatis dataset,Learn2Reg dataset,OASIS dataset)and a local dataset.Results proved that the proposed method achieved better registration performance than current state-of-the-art methods,especially in handling the registration of large deformations and fine structures.It also proved to be fast in 3D image registration,using about 1.5 s,and faster than most methods.Qualitative and quantitative assessments proved that the proposed MA-VoxelMorph has the potential to realize precise and fast tumor localization in clinical interventional surgeries.展开更多
Rare earth elements(REEs) are associated with phosphorite,which is an important strategic reserve resource.During sorting process of phosphorite,REEs may move with specific host minerals,however,occurrence state and m...Rare earth elements(REEs) are associated with phosphorite,which is an important strategic reserve resource.During sorting process of phosphorite,REEs may move with specific host minerals,however,occurrence state and moving pattern of REEs from rock to products are still unclear,which limits separation and enrichment of REEs from phosphorite.Mappings of scanning electron microscope(SEM) and electron probe X-ray micro-analyzer(EPMA) of REEs are highly consistent with those of calcium and phosphorus,and complementary with that of magnesium,which indicates that fluorapatite(Fap) is the main host mineral of REEs.The results of flotation and leaching experiments further indicate that REEs are enriched along with Fap from phosphorite to products.Occupied sites and occupation number of REEs were obtained by X-ray diffraction(XRD) refinement based on the Rietveld method.La,Ce,Nd,and Y can occupy both Ca1 and Ca2 sites.The ratios of La,Ce,Nd,and Y at Ca2 and Cal sites are 4.20,3.70,3.00,and 1.33,showing a decreasing trend,indicating that La,Ce,and Nd tend to occupy Ca2 sites,while Y tends to occupy Ca1 sites.X-ray absorption fine structure(XAFS) shows that REEs mainly form coordinate structures with oxygen and fluorine,which is a direct evidence that REEs replace calcium(Ⅱ) in phosphorite in an isomorphism form.Coordination structure and polyhedral configuration analysis indicate that substitution degree of La,Ce,Nd,and Y is Y> La> Ce≈Nd from easy to difficult at Cal and Ca2 sites.The research enriches the mineralization theory of REEs-bearing phosphorite and provides certain theoretical guidance for selective enrichment of REEs from phosphorite.展开更多
P2-type layered transition-metal oxides with high energy density and rich variety have attracted extensive attention for sodium-ion batteries(SIBs)in grid-scale energy storage application,but they usually suffer from ...P2-type layered transition-metal oxides with high energy density and rich variety have attracted extensive attention for sodium-ion batteries(SIBs)in grid-scale energy storage application,but they usually suffer from sluggish kinetics and large volume change upon cycling.Herein,we designed a highperformance P2-type Na_(0.67)Ni_(0.31)Mn_(0.67)Mo_(0.02)O_(2)(NNMMO)cathode with regulated electronic environment and Na^(+)zigzag ordering modulation via high-valence Mo6+stabilization engineering.The achieved NNMMO cathode exhibits a high-rate capability with a reversible capacity of 77.2 m Ah/g at 10 C and a long cycle life with a capacity retention of 75%at 2 C after 1000 cycles.In addition,in situ X-ray diffraction and ex-situ X-ray absorption fine structure spectroscopy characterizations verify that the presence of Mo^(6+)also stabilizes the desodiated structure through a pinning effect,achieving an extremely low volume change of 1.04%upon Na^(+)extraction.The quantified diffusional analysis and theoretical calculations demonstrate that the Mo^(6+)-doping improves the Na+diffusion kinetics,optimizes the energy band structure and enhances the TM-O bond strength.Additionally,the as-fabricated pouch cells by paring NNMMO cathode and hard carbon anode show impressive cycling stability with an energy density of 296.7 Wh/kg.This study broadens the perspective for high-valence metal ion doping to obtain superior cathode materials and pave the way for developing high-energy-density SIBs.展开更多
Lithium-and manganese-rich(LMR)oxide cathode materials are among the most attractive candidates for next-generation energy-storage materials owing to their anomalous capacity.However,severe Mn dissolution that occurs ...Lithium-and manganese-rich(LMR)oxide cathode materials are among the most attractive candidates for next-generation energy-storage materials owing to their anomalous capacity.However,severe Mn dissolution that occurs during long-term cycling,which leads to capacity loss,hinders their application prospects.In this study,nanoscale AlPO_(4)-coated Li_(1.2)Ni_(0.13)Co_(0.13)Mn_(0.54)O_(2)(LMR@APO)with significantly enhanced electrochemical performance is successfully synthesized using a simple and effective sol–gel method to mitigate Mn dissolution and suppress local structural distortion at high voltages.Because of the complex evolution of the structure and oxidation state of LMR materials during electrochemical cycling,observing and analyzing them using traditional single characterization methods may be difficult.Therefore,we combine various synchrotron-based characterization techniques to conduct a detailed analysis of the electronic and coordination structures of the cathode material from the surface to the bulk.Synchrotron-based hard and soft X-ray spectroscopies are integrated to investigate the differences in O and Mn evolution between the surfaces and bulk of the cathode.Advanced synchrotron-based transmission X-ray microscopy combined with X-ray near-edge absorption-structure technology is utilized to visualize the two-dimensional nanometer-scale reactivity of the LMR cathode.The AlPO_(4)-coating layer can stabilize the surface structure of the LMR material,effectively alleviating irreversible oxygen release on the surface and preventing the dissolution of Mn^(2+)at the interface caused by side reactions after a long cycle.Therefore,the spatial reaction uniformity of Mn is enhanced by the AlPO_(4)-coating layer,and rapid capacity decay caused by Mn deactivation is prevented.The AlPO_(4)-coating method is a facile modification strategy for high-performance LMR materials.展开更多
Because the grinding temperature is high when grinding using conventional disordered grinding wheels,the grinding quality improvement is limited when using single abrasive ordered grinding wheels,and the wheel prepara...Because the grinding temperature is high when grinding using conventional disordered grinding wheels,the grinding quality improvement is limited when using single abrasive ordered grinding wheels,and the wheel preparation process is complex and costly when using microstructured grinding wheels,abrasive groups ordered grinding wheels are widely investigated.However,there is a paucity of systematic analyses and comprehensive reviews focused on abrasive groups ordered grinding wheels.Therefore,this paper defines abrasive groups ordered grinding wheels and classifies them,based on their unique characteristics,into groups such as abrasive blocks ordered grinding wheel,fine grain structured grinding wheel,abrasive clusters ordered grinding wheel,and abrasive fibers ordered grinding wheel.We provide an overview of the latest advances in wheel structures,preparation methods,and abrasive selection for various types of abrasive groups ordered grinding wheels.Furthermore,we conduct a comparative analysis of the existing types,significant advantages,and challenges associated with the four types of abrasive groups ordered grinding wheels.Looking ahead,given the potential of abrasive groups ordered grinding wheels in reducing grinding force and temperature,we recommend further exploration of their application in combination with special processing techniques.This could pave the way for the development of machining processes that are more environmentally friendly,energy-efficient,and precise.展开更多
An oblique detonation wave for a Mach 7 inlet flow over a long enough wedge of 30 turning angle is simulated numerically using Euler equation and one-step rection model.The fifth-order WENO scheme is adopted to captur...An oblique detonation wave for a Mach 7 inlet flow over a long enough wedge of 30 turning angle is simulated numerically using Euler equation and one-step rection model.The fifth-order WENO scheme is adopted to capture the shock wave.The numerical results show that with the compression of the wedge wall the detonation wave front structure is divided into three sections：the ZND model-like strcuture,single-sided triple point structure and dual-headed triple point strucuture.The first structure is the smooth straight,and the second has the characteristic of the triple points propagating dowanstream only with the same velocity,while the dual-headed triple point structure is very complicated.The detonation waves facing upstream and downstream propagate with different velocities,in which the periodic collisions of the triple points cause the oscillation of the detonation wave front.This oscillation process has temporal and spatial periodicity.In addition,the triple point trace are recorded to obtain different cell structures in three sections.展开更多
An 1100 MPa grade ultra-high strength steel with different martensite fine structures, characterized by prior austenite grain size, martensite packet size, block width and lath width, was studied by various heat treat...An 1100 MPa grade ultra-high strength steel with different martensite fine structures, characterized by prior austenite grain size, martensite packet size, block width and lath width, was studied by various heat treatment processes. The result shows that with decreasing prior austenite grain size, both the packet size and block width decrease, while the lath width has virtually no change. Accordingly, both strength and toughness increase, while total elongation decreases. The yield strength has a Hall Petch type relationship with the prior austenite grain size, packet size and block width, and the block width may be regarded as a key factor influencing strength. On the other hand, the ductile to brittle transition temperature （DBTT） is found to be more related lo the packet size, which may be considered as a dominant factor influencing toughness.展开更多
The oxidation of antimony （Ⅲ） in soils was studied using X-ray absorption fine structure （XAFS） spectra. An andosol soft sample and artificial soil samples （SiO2 blended with iron （Ⅲ） hydroxide and manganese...The oxidation of antimony （Ⅲ） in soils was studied using X-ray absorption fine structure （XAFS） spectra. An andosol soft sample and artificial soil samples （SiO2 blended with iron （Ⅲ） hydroxide and manganese （Ⅳ） oxide） were used herein. After adding antimony （Ⅲ） oxide to all soil samples, the oxidation process was observed by recording the XAFS spectra of Sb K-edge, Fe Kedge, and Mn K-edge. The results indicated that manganese （Ⅳ） oxide played an important role in the oxidation of Sb（Ⅲ）; however iron （Ⅲ） hydroxide was not directly related to the reaction. During a 2-hr continuous Sb K-edge X-ray absorption near edge structure （XANES） measurement with an interval of I rain of one of the artificial soil samples （SiO2 ＋ MnO2 ＋ Sb2O3）, a pseudo-first-order reaction was determined with an average estimated rate of 0.52 ±0.04 hr-1. Compared to the lower oxidation rate of andosol, it is suggested that because of the low concentration of Mn（Ⅳ） in natural soils, the oxidation process of Sb（Ⅲ） might be relatively slow and require more time to convert Sb（Ⅲ） to Sb（V）.展开更多
基金the National Natural Science Foundation of China(Grant Nos.41831073,42174196,and 42374205)the Project of Stable Support for Youth Team in Basic Research Field,Chinese Academy of Sciences(CAS+4 种基金Grant No.YSBR-018)the Informatization Plan of CAS(Grant No.CAS-WX2021PY-0101)the Youth Cross Team Scientific Research project of the Chinese Academy of Sciences(Grant No.JCTD-2021-10)the Open Research Project of Large Research Infrastructures of CAS titled“Study on the Interaction Between Low-/Mid-Latitude Atmosphere and Ionosphere Based on the Chinese Meridian Project.”This work was also supported in part by the Specialized Research Fund and the Open Research Program of the State Key Laboratory of Space Weather.
文摘We derive the potential energy of gravity waves(GWs)in the upper troposphere and stratosphere at 45°S-45°N from December 2019 to November 2022 by using temperature profiles retrieved from the Constellation Observing System for Meteorology,Ionosphere,and Climate-2(COSMIC-2)satellite.Owing to the dense sampling of COSMIC-2,in addition to the strong peaks of gravity wave potential energy(GWPE)above the Andes and Tibetan Plateau,we found weak peaks above the Rocky,Atlas,Caucasus,and Tianshan Mountains.The land-sea contrast is responsible for the longitudinal variations of the GWPE in the lower and upper stratosphere.At 40°N/S,the peaks were mainly above the topographic regions during the winter.At 20°N/S,the peaks were a slight distance away from the topographic regions and might be the combined effect of nontopographic GWs and mountain waves.Near the Equator,the peaks were mainly above the regions with the lowest sea level altitude and may have resulted from convection.Our results indicate that even above the local regions with lower sea level altitudes compared with the Andes and Tibetan Plateau,the GWPE also exhibits fine structures in geographic distributions.We found that dissipation layers above the tropopause jet provide the body force to generate secondary waves in the upper stratosphere,especially during the winter months of each hemisphere and at latitudes of greater than 20°N/S.
文摘The microphase separation extent of biomedical segmented polyetherurethanes were greatly enhanced due to the presence of sulfoalkyl pendant groups contained in the hard segments,and the hard segments were more orderly aggregated through ionic interaction.
基金Supported by the National Natural Science Foundation of Chinasupported by the National Basic Research Program of the MOST (Grant No.2011CB811403)the CAS-NSFC Key Project (Grant No. 10978006)
文摘Seventy-one occurrences of coronal mass ejections （CMEs） associated with radio bursts, seemingly associated with type III bursts/fine structures （FSs）, in the centimeter-metric frequency range during 2003-2005, were obtained with the spectrometers at the National Astronomical Observatories, Chinese Academy of Sciences （NAOC） and the Culgoora radio spectrometer and are presented. The statistical results of 68 out of 71 events associated with the radio type III bursts or FSs during the initiation or early stages of the CMEs indicate that most CMEs contain the emissions of radio type III bursts/FSs near the time of the CME＇s onset, in spite of their fast or slow speeds. Therefore, we propose that type III bursts and FSs are possible precursors of the onset of CMEs. We stress that the radio type III bursts/FSs in the centimetermetric wavelength region and the CME transients possibly occurred in conjunction with the origin of the coronal precursor structures. Thus, the statistical results support the suggestions that type III bursts/FSs are indicators of extra energy input into the corona at the CMEs＇ onset, and that the type III bursts/FSs are produced primarily due to a coronal instability which eventually triggers the CME process. This may signify that the centimeter-metric radio bursts corresponding to or near the CME＇s onset are caused by the disturbed corona （possibly including minor magnetic reconnections）.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11974382 and 11474316)the support from NSERC and SHARCnet of Canada
文摘The fine and hyperfine structures of pionic helium metastable states is calculated within the formalism of the Breit-Pauli Hamiltonian by using the variationally generated wave functions in Hylleraas coordinates.Our results not only verify the existing values of Hori et al.[Phys.Rev.A 89,042515(2014)]for the fine structure of π^(4)He^(+),but also determine the hyperfine structure of π^(3)He^(+).
文摘The characteristic of interface depending on the atomic structure exerts an inportant,and sometime controlling,influence on performance of the interacial materials. The present paper reviews the main studies on fine structure of both the materials inter- faces and interfacial reaction products in semiconductor uperlattice,metal multilayer ceram- ics and composite materials by mean of selected area electron doffraction patterns and high resolution electron microscopy. The following features of interfaces are reviewed:the orientation relationships;the char- acteristic of steps,facets and ronghness of interfaces;atomic bonding across the interface;the degree of coherency,the structure of misfit dislocations and elastic relaxations at the inter- faces:the presence of defects at the onterfaces:the structure of the interfacial reaction prod- ucts as well as the reaction kinetics and reaetion mechanism.
基金financially supported by the National Natural Science Foundation of China(No.52371156).
文摘Although fine equiaxed structure benefits both strength and ductility in titanium alloys,it is often considered incompatible with high toughness,for its insufficient ability to deflect propagating cracks compared to coarse lamellar structure.This work reports an excellent combination of standard Charpy impact toughness(∼100 J)and yield strength(∼820 MPa)in a powder metallurgy titanium alloy with fine equiaxed structure(∼1.5μm),wherein the β matrix exists as equiaxed nodules and fine ligaments for globularization of α grains.The impact curve divided with the“compliance changing rate”(CCR)method indicates that the energy consumed by crack propagation is dominant(∼82%)during the impact process.Fractographic and structural examinations indicate that multiple micro-voids nucleation near boundaries between fine β ligaments and α grains mitigates local stress concentration,and that coordinated deformation between equiaxed β nodules and α grains hinders crack propagation,which together enable the excellent combination of yield strength and impact toughness.Our work provides a new pathway for designing impact-resistant titanium alloys.
文摘The layout and characteristics of the hard X-ray spectroscopy beamline(BL11B)at the Shanghai synchrotron radiation facility are described herein.BL11B is a bending-magnet beamline dedicated to conventional and millisecond-scale quick-scanning X-ray absorption fine structures.It is equipped with a cylindrical collimating mirror,a double-crystal monochromator comprising Si(111)and Si(311),a channel-cut quick-scanning Si(111)monochromator,a toroidal focusing mirror,and a high harmonics rejection mirror.It can provide 5-30 keV of X-rays with a photon flux of~5×10^(11)photons/s and an energy resolution of~1.31×10^(-4)at 10 keV.The performance of the beamline can satisfy the demands of users in the fields of catalysis,materials,and environmental science.This paper presents an overview of the beamline design and a detailed description of its performance and capabilities.
基金the National Natural Science Foundation of China ( Grant Nos.19874035, 59831020, 19734030), National 973 Project, National 863 Program, Climbing Project, The Ministry of Science and Technology of China, National High-Tec ICF Committee, the Ministry of
文摘A cluster model is used to calculate electron energy-loss fine structures in crystal. The multiple-scattering self-consistent-field method is employed in the calculation. Our theoretical results of N near K-edge energy loss fine structures in hexagonal GaN crystal are in good agreement with the experimental spectra. Future possible experiments in energy-filtered transmission electron microscopy (EFTEM) are discussed and proposed because our theoretical work can provide clear assignments for transmitted electrons with different energy losses.
基金Supported by National Natural Science Foundation of China （Grant No. 10771013）
文摘Denote by SFin（v） the set of all integer pairs （t, s） for which there exist three symmetric Latin squares of order v on the same set having fine structure （t, s）. We completely determine the set SFin（2n） for any integer n ≥ 5.
文摘Fine structure and elemental composition of envelopes of 10 taxa of Trachelomonas and Strombomonas from natural freshwater bodies in China were studied and phylogeny of both genera were discussed. The results indicate that iron (Fe) and silicon (Si) are the primary mineral elements of the envelopes. Composition of mineral elements was uncorrelated with envelope color, however, it was highly correlated with the microarchitecture of the envelopes. Content of Si was higher than that of Fe in all species of Strombomonas and some species of Trachelomonas with rough surface. In most species of Trachelomonas, especially those with dense and smoothy surface, content of Fe was higher than that of Si. Based on the above results, we propose to assign those species of Strombomonas into Trachelomonas and consider them as a group of the latter. These species were the most primitive among the group with envelopes in Euglenaceae.
基金The present research was supported by the National Natural Science Foundation of China(Grants 11972369,51809271,11872374 and 11602299).
文摘Shock wave/boundary layer interaction(SWBLI)is still one of the unresolved bottlenecks that restrict the development of more advanced flight vehicles.Supersonic forward-facing step(FFS),an extreme case of compression ramp,often occurs severe SWBLIs with a large separation bubble.In this paper,experimental investigations on vortical structures and density fluctuations characteristics of supersonic FFS controlled by self-sustaining dual synthetic jets(SDSJ)are carried out in a Mach number 2.95 wind tunnel.High spatial–temporal resolution flowfield images of FFS without/with active flow control are captured by adopting nano-particle-based planar laser scattering technique.The control effects of the distance between the actuator and the step are mainly compared.The paper finds that the SDSJ can effectively change the feature of flowfield,eliminate the separation shock and the reattachment shock,compel the original shock induced by the step leading edge to distort and reduce its intensity finally.Density fluctuations analysis demonstrates that the whole flows seem to move upstream with the increase of distance(dS-J).Discrete Fourier transformation spectrums results reveal that the fluctuations are mainly located in the low-frequency region at first.High-frequency components and frequency bandwidth increase slightly after the SDSJ are applied.
基金supported in part by the National Natural Science Foundation of China[62301374]Hubei Provincial Natural Science Foundation of China[2022CFB804]+2 种基金Hubei Provincial Education Research Project[B2022057]the Youths Science Foundation of Wuhan Institute of Technology[K202240]the 15th Graduate Education Innovation Fund of Wuhan Institute of Technology[CX2023295].
文摘This paper aims to develop a nonrigid registration method of preoperative and intraoperative thoracoabdominal CT images in computer-assisted interventional surgeries for accurate tumor localization and tissue visualization enhancement.However,fine structure registration of complex thoracoabdominal organs and large deformation registration caused by respiratory motion is challenging.To deal with this problem,we propose a 3D multi-scale attention VoxelMorph(MAVoxelMorph)registration network.To alleviate the large deformation problem,a multi-scale axial attention mechanism is utilized by using a residual dilated pyramid pooling for multi-scale feature extraction,and position-aware axial attention for long-distance dependencies between pixels capture.To further improve the large deformation and fine structure registration results,a multi-scale context channel attention mechanism is employed utilizing content information via adjacent encoding layers.Our method was evaluated on four public lung datasets(DIR-Lab dataset,Creatis dataset,Learn2Reg dataset,OASIS dataset)and a local dataset.Results proved that the proposed method achieved better registration performance than current state-of-the-art methods,especially in handling the registration of large deformations and fine structures.It also proved to be fast in 3D image registration,using about 1.5 s,and faster than most methods.Qualitative and quantitative assessments proved that the proposed MA-VoxelMorph has the potential to realize precise and fast tumor localization in clinical interventional surgeries.
基金Project supported by Guizhou Provincial Basic Research Program (Natural Science)(Qian Ke He Basic-ZK 2024 General 626)National Natural Science Foundation of China (52164018)Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology (13210025)。
文摘Rare earth elements(REEs) are associated with phosphorite,which is an important strategic reserve resource.During sorting process of phosphorite,REEs may move with specific host minerals,however,occurrence state and moving pattern of REEs from rock to products are still unclear,which limits separation and enrichment of REEs from phosphorite.Mappings of scanning electron microscope(SEM) and electron probe X-ray micro-analyzer(EPMA) of REEs are highly consistent with those of calcium and phosphorus,and complementary with that of magnesium,which indicates that fluorapatite(Fap) is the main host mineral of REEs.The results of flotation and leaching experiments further indicate that REEs are enriched along with Fap from phosphorite to products.Occupied sites and occupation number of REEs were obtained by X-ray diffraction(XRD) refinement based on the Rietveld method.La,Ce,Nd,and Y can occupy both Ca1 and Ca2 sites.The ratios of La,Ce,Nd,and Y at Ca2 and Cal sites are 4.20,3.70,3.00,and 1.33,showing a decreasing trend,indicating that La,Ce,and Nd tend to occupy Ca2 sites,while Y tends to occupy Ca1 sites.X-ray absorption fine structure(XAFS) shows that REEs mainly form coordinate structures with oxygen and fluorine,which is a direct evidence that REEs replace calcium(Ⅱ) in phosphorite in an isomorphism form.Coordination structure and polyhedral configuration analysis indicate that substitution degree of La,Ce,Nd,and Y is Y> La> Ce≈Nd from easy to difficult at Cal and Ca2 sites.The research enriches the mineralization theory of REEs-bearing phosphorite and provides certain theoretical guidance for selective enrichment of REEs from phosphorite.
基金partly supported by the National Natural Science Foundation of China(Nos.12275189 and 11705015)Natural Science Foundation of the Jiangsu Higher Education Institutions(No.23KJA430001)Collaborative Innovation Center of Suzhou Nano Science&Technology。
文摘P2-type layered transition-metal oxides with high energy density and rich variety have attracted extensive attention for sodium-ion batteries(SIBs)in grid-scale energy storage application,but they usually suffer from sluggish kinetics and large volume change upon cycling.Herein,we designed a highperformance P2-type Na_(0.67)Ni_(0.31)Mn_(0.67)Mo_(0.02)O_(2)(NNMMO)cathode with regulated electronic environment and Na^(+)zigzag ordering modulation via high-valence Mo6+stabilization engineering.The achieved NNMMO cathode exhibits a high-rate capability with a reversible capacity of 77.2 m Ah/g at 10 C and a long cycle life with a capacity retention of 75%at 2 C after 1000 cycles.In addition,in situ X-ray diffraction and ex-situ X-ray absorption fine structure spectroscopy characterizations verify that the presence of Mo^(6+)also stabilizes the desodiated structure through a pinning effect,achieving an extremely low volume change of 1.04%upon Na^(+)extraction.The quantified diffusional analysis and theoretical calculations demonstrate that the Mo^(6+)-doping improves the Na+diffusion kinetics,optimizes the energy band structure and enhances the TM-O bond strength.Additionally,the as-fabricated pouch cells by paring NNMMO cathode and hard carbon anode show impressive cycling stability with an energy density of 296.7 Wh/kg.This study broadens the perspective for high-valence metal ion doping to obtain superior cathode materials and pave the way for developing high-energy-density SIBs.
基金supported by the National Key R&D Program of China(No.2022YFB3807700)National Natural Science Foundation of China(Nos.U20A20248 and 52372247)+1 种基金Shanghai Pujiang Programme(23PJD110)Science and Technology Commission of Shanghai Municipality(No.18DZ2280800)。
文摘Lithium-and manganese-rich(LMR)oxide cathode materials are among the most attractive candidates for next-generation energy-storage materials owing to their anomalous capacity.However,severe Mn dissolution that occurs during long-term cycling,which leads to capacity loss,hinders their application prospects.In this study,nanoscale AlPO_(4)-coated Li_(1.2)Ni_(0.13)Co_(0.13)Mn_(0.54)O_(2)(LMR@APO)with significantly enhanced electrochemical performance is successfully synthesized using a simple and effective sol–gel method to mitigate Mn dissolution and suppress local structural distortion at high voltages.Because of the complex evolution of the structure and oxidation state of LMR materials during electrochemical cycling,observing and analyzing them using traditional single characterization methods may be difficult.Therefore,we combine various synchrotron-based characterization techniques to conduct a detailed analysis of the electronic and coordination structures of the cathode material from the surface to the bulk.Synchrotron-based hard and soft X-ray spectroscopies are integrated to investigate the differences in O and Mn evolution between the surfaces and bulk of the cathode.Advanced synchrotron-based transmission X-ray microscopy combined with X-ray near-edge absorption-structure technology is utilized to visualize the two-dimensional nanometer-scale reactivity of the LMR cathode.The AlPO_(4)-coating layer can stabilize the surface structure of the LMR material,effectively alleviating irreversible oxygen release on the surface and preventing the dissolution of Mn^(2+)at the interface caused by side reactions after a long cycle.Therefore,the spatial reaction uniformity of Mn is enhanced by the AlPO_(4)-coating layer,and rapid capacity decay caused by Mn deactivation is prevented.The AlPO_(4)-coating method is a facile modification strategy for high-performance LMR materials.
基金Supported by National Natural Science Foundation of China(Grant No.52175401)Hunan Provincial Postgraduate Scientific Research Innovation Project(Grant No.QL20230244)+1 种基金Enterprise Innovation and Development Joint Program of National Natural Science Foundation of China(Grant No.U20B2032)Hunan Provincial Science and Technology Innovation Program(Grant No.2022RC1050).
文摘Because the grinding temperature is high when grinding using conventional disordered grinding wheels,the grinding quality improvement is limited when using single abrasive ordered grinding wheels,and the wheel preparation process is complex and costly when using microstructured grinding wheels,abrasive groups ordered grinding wheels are widely investigated.However,there is a paucity of systematic analyses and comprehensive reviews focused on abrasive groups ordered grinding wheels.Therefore,this paper defines abrasive groups ordered grinding wheels and classifies them,based on their unique characteristics,into groups such as abrasive blocks ordered grinding wheel,fine grain structured grinding wheel,abrasive clusters ordered grinding wheel,and abrasive fibers ordered grinding wheel.We provide an overview of the latest advances in wheel structures,preparation methods,and abrasive selection for various types of abrasive groups ordered grinding wheels.Furthermore,we conduct a comparative analysis of the existing types,significant advantages,and challenges associated with the four types of abrasive groups ordered grinding wheels.Looking ahead,given the potential of abrasive groups ordered grinding wheels in reducing grinding force and temperature,we recommend further exploration of their application in combination with special processing techniques.This could pave the way for the development of machining processes that are more environmentally friendly,energy-efficient,and precise.
基金supported by the National Natural Science Foundation of China (10872096)the Open Fund of State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology (KFJJ09-13)
文摘An oblique detonation wave for a Mach 7 inlet flow over a long enough wedge of 30 turning angle is simulated numerically using Euler equation and one-step rection model.The fifth-order WENO scheme is adopted to capture the shock wave.The numerical results show that with the compression of the wedge wall the detonation wave front structure is divided into three sections：the ZND model-like strcuture,single-sided triple point structure and dual-headed triple point strucuture.The first structure is the smooth straight,and the second has the characteristic of the triple points propagating dowanstream only with the same velocity,while the dual-headed triple point structure is very complicated.The detonation waves facing upstream and downstream propagate with different velocities,in which the periodic collisions of the triple points cause the oscillation of the detonation wave front.This oscillation process has temporal and spatial periodicity.In addition,the triple point trace are recorded to obtain different cell structures in three sections.
文摘An 1100 MPa grade ultra-high strength steel with different martensite fine structures, characterized by prior austenite grain size, martensite packet size, block width and lath width, was studied by various heat treatment processes. The result shows that with decreasing prior austenite grain size, both the packet size and block width decrease, while the lath width has virtually no change. Accordingly, both strength and toughness increase, while total elongation decreases. The yield strength has a Hall Petch type relationship with the prior austenite grain size, packet size and block width, and the block width may be regarded as a key factor influencing strength. On the other hand, the ductile to brittle transition temperature （DBTT） is found to be more related lo the packet size, which may be considered as a dominant factor influencing toughness.
基金XAFS measurements were carried out at Photon Factory,Tsukuba,Japan(Nos.2014G066,2016G086).
文摘The oxidation of antimony （Ⅲ） in soils was studied using X-ray absorption fine structure （XAFS） spectra. An andosol soft sample and artificial soil samples （SiO2 blended with iron （Ⅲ） hydroxide and manganese （Ⅳ） oxide） were used herein. After adding antimony （Ⅲ） oxide to all soil samples, the oxidation process was observed by recording the XAFS spectra of Sb K-edge, Fe Kedge, and Mn K-edge. The results indicated that manganese （Ⅳ） oxide played an important role in the oxidation of Sb（Ⅲ）; however iron （Ⅲ） hydroxide was not directly related to the reaction. During a 2-hr continuous Sb K-edge X-ray absorption near edge structure （XANES） measurement with an interval of I rain of one of the artificial soil samples （SiO2 ＋ MnO2 ＋ Sb2O3）, a pseudo-first-order reaction was determined with an average estimated rate of 0.52 ±0.04 hr-1. Compared to the lower oxidation rate of andosol, it is suggested that because of the low concentration of Mn（Ⅳ） in natural soils, the oxidation process of Sb（Ⅲ） might be relatively slow and require more time to convert Sb（Ⅲ） to Sb（V）.
