This study systematically investigated the influence of deposition rate on the structure,broadband opti⁃cal properties(1.0-13.0μm),and stress characteristics of Germanium(Ge)films.Additionally,a method for enhancing ...This study systematically investigated the influence of deposition rate on the structure,broadband opti⁃cal properties(1.0-13.0μm),and stress characteristics of Germanium(Ge)films.Additionally,a method for enhancing the performance of infrared filters based on rate-modulated deposition of Ge films was proposed.The optical absorption of Ge films in the short-wave infrared(SWIR)and long-wave infrared(LWIR)bands can be effectively reduced by modulating the deposition rate.As the deposition rate increases,the Ge films maintain an amorphous structure.The optical constants of the films in the 1.0-2.5μm and 2.5-13.0μm bands were precisely determined using the Cody-Lorentz model and the classical Lorentz oscillator model,respectively.Notably,high⁃er deposition rates result in a gradual increase in the refractive index.The extinction coefficient increases with the deposition rate in the SWIR region,attributed to the widening of the Urbach tail,while it decreases in the LWIR region due to the reduced absorption caused by the Ge-O stretching mode.Additionally,the films exhibit a tensile stress that decreases with increasing deposition rate.Finally,the effectiveness of the proposed fabrication method for an infrared filter with Ge films deposited at an optimized rate was demonstrated through practical examples.This work provides theoretical and technical support for the application of Ge films in high-performance infrared filters.展开更多
The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recogni...The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.展开更多
Accurate estimation of the State of Charge(SOC),State of Health(SOH),and Terminal Resistance(TR)is crucial for the effective operation of Battery Management Systems(BMS)in lithium-ion batteries.This study conducts a c...Accurate estimation of the State of Charge(SOC),State of Health(SOH),and Terminal Resistance(TR)is crucial for the effective operation of Battery Management Systems(BMS)in lithium-ion batteries.This study conducts a comprehensive comparative analysis of four Kalman filter variants Extended Kalman Filter(EKF),Extended Kalman-Bucy Filter(EKBF),Unscented Kalman Filter(UKF),and Unscented Kalman-Bucy Filter(UKBF)under varying battery parameter conditions.These include temperature fluctuation,self-discharge,current direction,cell capacity,process noise,and measurement noise.Our findings reveal significant variations in the performance of SOC and SOH predictions across filters,emphasizing that UKF demonstrates superior robustness to noise,while EKF performs better under accurate system dynamics.The study underscores the need for adaptive filtering strategies that can dynamically adjust to evolving battery parameters,thereby enhancing BMS reliability and extending battery lifespan.展开更多
1 Introduction Recently,the increasing demand for advanced telecommunication systems has spurred extensive research into bandpass filters(BPFs),with particular emphasis on miniaturization,reduction of insertion loss(I...1 Introduction Recently,the increasing demand for advanced telecommunication systems has spurred extensive research into bandpass filters(BPFs),with particular emphasis on miniaturization,reduction of insertion loss(IL),and enhancement of upper stopband rejection(Huang et al.,2021;Snyder et al.,2021;Lin et al.,2023;Zeng et al.,2023).展开更多
In this study,a fifth-degree cubature particle filter(5CPF)is proposed to address the limited estimation accuracy in traditional particle filter algorithms for bearings-only tracking(BOT).This algorithm calculates the...In this study,a fifth-degree cubature particle filter(5CPF)is proposed to address the limited estimation accuracy in traditional particle filter algorithms for bearings-only tracking(BOT).This algorithm calculates the recommended density function by introducing a fifth-degree cubature Kalman filter algorithm to guide particle sampling,which effectively alleviates the problem of particle degradation and significantly improves the estimation accuracy of the filter.However,the 5CPF algorithm exhibits high computational complexity,particularly in scenarios with a large number of particles.Therefore,we propose the extended Kalman filter(EKF)-5CPF algorithm,which employs an EKF to replace the time update step for each particle in the 5CPF.This enhances the algorithm’s real-time capability while maintaining the high precision advantage of the 5CPF algorithm.In addition,we construct bearing-only dual-station and single-motion station target tracking systems,and the filtering performances of 5CPF and EKF-5CPF algorithms under different conditions are analyzed.The results show that both the 5CPF algorithm and EKF-5CPF have strong robustness and can adapt to different noise environments.Furthermore,both algorithms significantly outperform traditional nonlinear filtering algorithms in terms of convergence speed,tracking accuracy,and overall stability.展开更多
Color filters are essential components for optical modulation.However,conventional filters are restricted to operating exclusively in either reflective or transmissive mode.Furthermore,they suffer from limited UV and ...Color filters are essential components for optical modulation.However,conventional filters are restricted to operating exclusively in either reflective or transmissive mode.Furthermore,they suffer from limited UV and thermal stability,low color purity,and exhibit identical coloration on both surfaces.Herein,we propose a novel design strategy for trans-reflective color filters by integrating the absorptive properties of dye-doped polysulfone(PSU)with the diffractive capabilities of photonic crystals.This composite filter achieved broad-spectrum transmission with deep color outputs—yellow(0.410,0.510),magenta(0.446,0.231),and cyan(0.201,0.425)—closely aligned with standard color space coordinates.By tuning the refractive index of CeO_(2)@SiO_(2)nanoparticles to match dye-based PSU matrix,the transmittance of filters exceeded 70%.Moreover,dye-mediated absorption reduces the scattering light,thereby enhancing reflection color purity(full width at half maxima(FWHM)=25 nm)and producing vibrant blue,green,and red hues.The incorporation of UV-absorbing CeO_(2)@SiO_(2)nanoparticles effectively mitigated dye photodegradation,yielding exceptional UV stability(ΔT<2%under prolonged UV exposure).The filters also exhibited outstanding thermal stability(ΔT<1%after 30 min heat treatment at 230°C).This work establishes a robust materials design framework for multifunctional optical filters,advancing the development of highfidelity dual-mode color systems for next-generation display technologies.展开更多
Recommendation systems are an integral and indispensable part of every digital platform,as they can suggest content or items to users based on their respective needs.Collaborative filtering is a technique often used i...Recommendation systems are an integral and indispensable part of every digital platform,as they can suggest content or items to users based on their respective needs.Collaborative filtering is a technique often used in various studies,which produces recommendations by analyzing similarities between users and items based on their behavior.Although often used,traditional collaborative filtering techniques still face the main challenge of sparsity.Sparsity problems occur when the data in the system is sparse,meaning that only a portion of users provide feedback on some items,resulting in inaccurate recommendations generated by the system.To overcome this problem,we developed aHybrid Collaborative Filtering model based onMatrix Factorization andGradient Boosting(HCF-MFGB),a new hybrid approach.Our proposed model integrates SVD++,the XGBoost ensemble learning algorithm,and utilizes user demographic data and meta items.We utilize information,both explicitly and implicitly,to learn user preference patterns using SVD++.The XGBoost algorithm is used to create hundreds of decision trees incrementally,thereby improving model accuracy.Meanwhile,user demographic and meta-item data are clustered using the K-Means Clustering algorithm to capture similarities in user and item characteristics.This combination is designed to improve rating prediction accuracy by reducing reliance on minimal explicit rating data,while addressing sparsity issues in movie recommendation systems.The results of experiments on the MovieLens 100K,MovieLens 1M,and CiaoDVD datasets show significant improvements,outperforming various other baselinemodels in terms of RMSE and MAE.On theMovieLens 100K dataset,the HCF-MFGB model obtained an RMSE value of 0.853 and an MAE value of 0.674.On theMovieLens 1M dataset,the HCF-MFGB model obtained an RMSE value of 0.763 and an MAE value of 0.61.On the CiaoDCD dataset,the HCF-MFGB model achieved an RMSE value of 0.718 and an MAE value of 0.495.These results confirm a significant improvement in movie recommendation accuracy with the proposed approach.展开更多
This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temp...This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temperature distribution,suitable for control design due to its balance between physical fidelity and computational simplicity.The controller uses a wavelet-based neural proportional,integral,derivative(PID)controller with IIR filtering(infinite impulse response).The dynamic model captures the essential heat and mass transfer phenomena through a nonlinear energy balance,where the cooling capacity“Qevap”is expressed as a non-linear function of the compressor frequency and the temperature difference,specifically,Q_(evap)=k_(1)u(T_(in)−T_(e))with u as compressor frequency,Te evaporator temperature,and Tin inlet fluid temperature.The operating conditions of the system,in general terms,focus on the following variables,the overall thermal capacity is 1000 J/K,typical for small-capacity heat exchangers,The mass flow is 0.05 kg/s,typical for secondary liquid cooling circuits,the overall loss coefficient of 50 W/K that corresponds to small evaporators with partial insulation,the temperatures(inlet)of 10℃and the temperature of environment of 25℃,thermal load of 200 W that corresponds to a small-scaled air conditioning applications.To handle system nonlinearities and improve control performance,aMorlet wavelet-based neural network(Wavenet)is used to dynamically adjust the PID gains online.An IIR filter is incorporated to smooth the adaptive gains,improving stability and reducing oscillations.In contrast to prior wavelet-or neural-adaptive PID controllers in HVAC applications,which typically adjust gains without explicit filtering or not tailored to evaporator dynamics,this work introduces the first PID–Wavenet scheme augmented with an IIR-based stabilization layer,specifically designed to address the combined challenges of nonlinear evaporator behavior,gain oscillation,and real-time implementability.The proposed controller(PID-Wavenet+IIR)is implemented and validated inMATLAB/Simulink,demonstrating superior performance compared to a conventional PID tuned using Simulink’s auto-tuning function.Key results include a reduction in settling time from 13.3 to 8.2 s,a reduction in overshoot from 3.5%to 0.8%,a reduction in steady-state error from 0.12℃ to 0.02℃and a 13%reduction in energy overall consumption.The controller also exhibits greater robustness and adaptability under varying thermal loads.This explicit integration of wavelet-driven adaptation with IIR-filtered gain shaping constitutes the main methodological contribution and novelty of the work.These findings validate the effectiveness of the wavelet-based adaptive approach for advanced thermal management in refrigeration and HVAC systems,with potential applications in controlling variable-speed compressors,liquid chillers,and compact cooling units.展开更多
This article proposes a generalized strongly coupled resonator quartet(GSCRQ)filter along with its synthesis approach.By introducing out-of-band reflection zeros(RZs),the proposed GSCRQ can generate a transmission zer...This article proposes a generalized strongly coupled resonator quartet(GSCRQ)filter along with its synthesis approach.By introducing out-of-band reflection zeros(RZs),the proposed GSCRQ can generate a transmission zero on each side of the passband without negative couplings.The coupling coefficients in this coupling structure change with the positions of the out-of-band RZs.Thus,the GSCRQ configuration admits flexible design solutions.For GSCRQ coaxial combline filters,all couplings can be implemented as inductive couplings,simplifying the design and manufacturing process.In this article,a 6-2 filter in the GSCRQ configuration is synthesized and designed.The simulated results of the designed filter agree very well with the theoretical characteristics.展开更多
Deep graph contrastive clustering has attracted widespread attentions due to its self-supervised representation learning paradigm and superior clustering performance.Although,two challenges emerge and result in high c...Deep graph contrastive clustering has attracted widespread attentions due to its self-supervised representation learning paradigm and superior clustering performance.Although,two challenges emerge and result in high computational costs.Most existing contrastive methods adopt the data augmentation and then representation learning strategy,where representation learning with trainable graph convolution is coupled with complex and fixed data augmentation,inevitably limiting the efficiency and flexibility.The similarity metric between positive-negative sample pairs is complex and contrastive objective is partial,limiting the discriminability of representation learning.To solve these challenges,a novel wide graph clustering network(WGCN)adhering to representation and then augmentation framework is proposed,which mainly consists of multiorder filter fusion(MFF)and double-level contrastive learning(DCL)modules.Specifically,the MFF module integrates multiorder low-pass filters to extract smooth and multi-scale topological features,utilizing self-attention fusion to reduce redundancy and obtain comprehensive embedding representation.Further,the DCL module constructs two augmented views by the parallel parameter-unshared Siamese encoders rather than complex augmentations on graph.To achieve simple yet effective self-supervised learning,representation self-supervision and structural consistency oriented double-level contrastive loss is designed,where representation self-supervision maximizes the agreement between pairwise augmented embedding representations and structural consistency promotes the mutual information correlation between appending neighborhoods with similar semantics.Extensive experiments on six benchmark datasets demonstrate the superiority of the proposed WGCN,especially highlighting its time-saving characteristic.The code could be available in the https://github.com/Tianxiang Zhao0474/WGCN.展开更多
胃肠动力障碍性疾病(disorders of gastrointestinal motility,DGIM)是指因胃肠动力失常引起的以消化道症状为主要临床表现的疾病。DGIM的发病率有逐年升高的趋势,降低人们生活质量的同时,还增加了社会的医疗支出。DGIM的发病机制尚未...胃肠动力障碍性疾病(disorders of gastrointestinal motility,DGIM)是指因胃肠动力失常引起的以消化道症状为主要临床表现的疾病。DGIM的发病率有逐年升高的趋势,降低人们生活质量的同时,还增加了社会的医疗支出。DGIM的发病机制尚未完全阐明,多项研究表明其发生发展与胃肠道动力异常关系密切。胃肠动力与胃肠道Cajal间质细胞(ICC)密切相关。ICC是胃肠道产生慢波运动的特殊细胞,ICC数量和形态的保持又与SCF/c-kit信号通路密切相关。近年来的研究表明,SCF/c-kit信号通路的异常改变可导致DGIM的发生。目前,DGIM的西医治疗主要为促动力及抑酸等对症治疗,在一定程度上能够缓解DGIM的症状,但常伴有不良反应,使药物的应用范围受限,而大量研究证实,中药、中药单体或成分、复方、中医外治法均可通过调节SCF/c-kit信号通路,有效改善胃肠动力的同时,不良反应较小。虽然中医药通过调控SCF/c-kit信号通路干预DGIM具有西医难以取代的独特优势,但目前中医药调控SCF/c-kit信号通路治疗DGIM系统综述仍较少。文章就SCF/c-kit信号通路与DGIM之间的相关性、中医药调控SCF/c-kit信号通路干预DGIM的作用机制进行系统性总结,旨在为临床治疗DGIM及新药研发提供新思考。展开更多
The SKP1 gene is an important component of the SCF(SKP1-Cullin1-F-box)complex and serves as a bridge connecting the F-box and Cullin1genes(F-box-SKP1-Cullin1).The pattern of S-RNase being ubiquitously labelled by the ...The SKP1 gene is an important component of the SCF(SKP1-Cullin1-F-box)complex and serves as a bridge connecting the F-box and Cullin1genes(F-box-SKP1-Cullin1).The pattern of S-RNase being ubiquitously labelled by the SCF complex and degraded by the 26S protease accounts for the bulk of the available self-incompatibility studies.In this study,15 ClSKP1s from the‘Xiangshui'lemon genome and ubiquitome exist in the same SKP1 conserved domain(CD)as SKP1s in other species.The q PCR results showed that SKP1-6 and SKP1-14 have tissue expression patterns specific for expression in pollen.In addition,SKP1-6 and SKP1-14 in the stigma,style and ovary were significantly upregulated after self-pollination compared to those after cross-pollination.A subcellular location showed that SKP1-6 and SKP1-14 were located in the nucleus.In addition,yeast two-hybrid(Y2H)assays,bimolecular fluorescence complementation(BiFC)and luciferase complementation imaging(LCI)assays showed that SKP1-6 interacted with F-box1,F-box33,F-box34,F-box17,F-box19,Cullin1-2 and 26S proteasome subunit 4 homolog A(26S PS4HA).SKP1-14 interacted with F-box17,F-box19,F-box35,Cullin1-2 and 26S PS4HA.The interaction of Cullin1-2 and the F-box with SKP1 as a bridge was verified by a yeast three-hybrid experiment.The ability of S3-RNase to inhibit pollen and pollen tube growth and development was assessed using in vitro pollen co-culture experiments with recombinant S3-RNase proteins.Overall,this study provides important experimental evidence and theoretical basis for understanding the mechanism of self-incompatibility in plants by revealing the key role of the SCF complex in‘Xiangshui'lemon,which is bridged by ClSKP1-6,in self-incompatibility.The results of this study are of great significance for the future indepth exploration of the molecular mechanism of the SCF complex and its wide application in the self-incompatibility of plants.展开更多
The surge of large-scale models in recent years has led to breakthroughs in numerous fields,but it has also introduced higher computational costs and more complex network architectures.These increasingly large and int...The surge of large-scale models in recent years has led to breakthroughs in numerous fields,but it has also introduced higher computational costs and more complex network architectures.These increasingly large and intricate networks pose challenges for deployment and execution while also exacerbating the issue of network over-parameterization.To address this issue,various network compression techniques have been developed,such as network pruning.A typical pruning algorithm follows a three-step pipeline involving training,pruning,and retraining.Existing methods often directly set the pruned filters to zero during retraining,significantly reducing the parameter space.However,this direct pruning strategy frequently results in irreversible information loss.In the early stages of training,a network still contains much uncertainty,and evaluating filter importance may not be sufficiently rigorous.To manage the pruning process effectively,this paper proposes a flexible neural network pruning algorithm based on the logistic growth differential equation,considering the characteristics of network training.Unlike other pruning algorithms that directly reduce filter weights,this algorithm introduces a three-stage adaptive weight decay strategy inspired by the logistic growth differential equation.It employs a gentle decay rate in the initial training stage,a rapid decay rate during the intermediate stage,and a slower decay rate in the network convergence stage.Additionally,the decay rate is adjusted adaptively based on the filter weights at each stage.By controlling the adaptive decay rate at each stage,the pruning of neural network filters can be effectively managed.In experiments conducted on the CIFAR-10 and ILSVRC-2012 datasets,the pruning of neural networks significantly reduces the floating-point operations while maintaining the same pruning rate.Specifically,when implementing a 30%pruning rate on the ResNet-110 network,the pruned neural network not only decreases floating-point operations by 40.8%but also enhances the classification accuracy by 0.49%compared to the original network.展开更多
With the rapid development of wireless techniques,the bandpass filter(BPF)is required to cover microwave and millimeter-wave frequency bands simultaneously with good mid-band suppression.However,it is difficult to imp...With the rapid development of wireless techniques,the bandpass filter(BPF)is required to cover microwave and millimeter-wave frequency bands simultaneously with good mid-band suppression.However,it is difficult to implement such BPF due to the large frequency ratio and wideband rejection.This paper presents a superior method to realize a dual-band BPF with a large frequency ratio maintaining compact size and low design complexity.This is contributed by an ultra-wide stopband BPF with inherent discriminating excited degree at spurious frequencies.By properly arranging the feeding position and electrical length ratio of stepped impedance resonator(SIR),the excited degree at specific spurious frequencies can be flexibly adjusted to achieve desired suppression level without affecting characteristics at the fundamental passband.For validation,two BPFs were simulated,fabricated and measured,exhibiting suppression levels of 20.3 dB and 35 dB up to 18f0 and 10.53f0 respectively.Based on this,a dual-band BPF with a large frequency ratio can be easily constructed.For demonstration,a dual-band BPF operating at 3.55 GHz and 43.15 GHz is implemented.A frequency ratio up to 12.15 and mid-band suppression level better than 28 dB had been achieved.Advantages of compactness,simplicity and excellent performance of the proposed work can be observed.展开更多
基金Supported by the National Natural Science Foundation of China(62275053,62275256)the National key Research and Development Program of China(2021YFB3701500)+1 种基金the Youth Innovation Promotion Association of the Chinese Academy of Sciences(2023248)the Eastern Talent Plan Youth Project 2022,the Shanghai Key Laboratory of Optical Coatings and Spectral Modulation(23dz2260500).
文摘This study systematically investigated the influence of deposition rate on the structure,broadband opti⁃cal properties(1.0-13.0μm),and stress characteristics of Germanium(Ge)films.Additionally,a method for enhancing the performance of infrared filters based on rate-modulated deposition of Ge films was proposed.The optical absorption of Ge films in the short-wave infrared(SWIR)and long-wave infrared(LWIR)bands can be effectively reduced by modulating the deposition rate.As the deposition rate increases,the Ge films maintain an amorphous structure.The optical constants of the films in the 1.0-2.5μm and 2.5-13.0μm bands were precisely determined using the Cody-Lorentz model and the classical Lorentz oscillator model,respectively.Notably,high⁃er deposition rates result in a gradual increase in the refractive index.The extinction coefficient increases with the deposition rate in the SWIR region,attributed to the widening of the Urbach tail,while it decreases in the LWIR region due to the reduced absorption caused by the Ge-O stretching mode.Additionally,the films exhibit a tensile stress that decreases with increasing deposition rate.Finally,the effectiveness of the proposed fabrication method for an infrared filter with Ge films deposited at an optimized rate was demonstrated through practical examples.This work provides theoretical and technical support for the application of Ge films in high-performance infrared filters.
文摘The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.
基金supported by the Royal Academy of Engineering,UK,in the scheme of Distinguished International Associate(DIA-2424-5-134).
文摘Accurate estimation of the State of Charge(SOC),State of Health(SOH),and Terminal Resistance(TR)is crucial for the effective operation of Battery Management Systems(BMS)in lithium-ion batteries.This study conducts a comprehensive comparative analysis of four Kalman filter variants Extended Kalman Filter(EKF),Extended Kalman-Bucy Filter(EKBF),Unscented Kalman Filter(UKF),and Unscented Kalman-Bucy Filter(UKBF)under varying battery parameter conditions.These include temperature fluctuation,self-discharge,current direction,cell capacity,process noise,and measurement noise.Our findings reveal significant variations in the performance of SOC and SOH predictions across filters,emphasizing that UKF demonstrates superior robustness to noise,while EKF performs better under accurate system dynamics.The study underscores the need for adaptive filtering strategies that can dynamically adjust to evolving battery parameters,thereby enhancing BMS reliability and extending battery lifespan.
基金supported by the National Natural Science Foundation of China(No.62371263)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.SJCK25_1995).
文摘1 Introduction Recently,the increasing demand for advanced telecommunication systems has spurred extensive research into bandpass filters(BPFs),with particular emphasis on miniaturization,reduction of insertion loss(IL),and enhancement of upper stopband rejection(Huang et al.,2021;Snyder et al.,2021;Lin et al.,2023;Zeng et al.,2023).
基金Supported by the Guangxi Special Program for Technological Innovation Guidance(No.GuiKeAC25069006).
文摘In this study,a fifth-degree cubature particle filter(5CPF)is proposed to address the limited estimation accuracy in traditional particle filter algorithms for bearings-only tracking(BOT).This algorithm calculates the recommended density function by introducing a fifth-degree cubature Kalman filter algorithm to guide particle sampling,which effectively alleviates the problem of particle degradation and significantly improves the estimation accuracy of the filter.However,the 5CPF algorithm exhibits high computational complexity,particularly in scenarios with a large number of particles.Therefore,we propose the extended Kalman filter(EKF)-5CPF algorithm,which employs an EKF to replace the time update step for each particle in the 5CPF.This enhances the algorithm’s real-time capability while maintaining the high precision advantage of the 5CPF algorithm.In addition,we construct bearing-only dual-station and single-motion station target tracking systems,and the filtering performances of 5CPF and EKF-5CPF algorithms under different conditions are analyzed.The results show that both the 5CPF algorithm and EKF-5CPF have strong robustness and can adapt to different noise environments.Furthermore,both algorithms significantly outperform traditional nonlinear filtering algorithms in terms of convergence speed,tracking accuracy,and overall stability.
基金supported by the Program of the National Natural Science Foundation of China(22238002)the Fundamental Research Funds for the Central Universities(DUT22-LAB610)Research and Innovation Team Project of Dalian University of Technology(DUT2022TB10).
文摘Color filters are essential components for optical modulation.However,conventional filters are restricted to operating exclusively in either reflective or transmissive mode.Furthermore,they suffer from limited UV and thermal stability,low color purity,and exhibit identical coloration on both surfaces.Herein,we propose a novel design strategy for trans-reflective color filters by integrating the absorptive properties of dye-doped polysulfone(PSU)with the diffractive capabilities of photonic crystals.This composite filter achieved broad-spectrum transmission with deep color outputs—yellow(0.410,0.510),magenta(0.446,0.231),and cyan(0.201,0.425)—closely aligned with standard color space coordinates.By tuning the refractive index of CeO_(2)@SiO_(2)nanoparticles to match dye-based PSU matrix,the transmittance of filters exceeded 70%.Moreover,dye-mediated absorption reduces the scattering light,thereby enhancing reflection color purity(full width at half maxima(FWHM)=25 nm)and producing vibrant blue,green,and red hues.The incorporation of UV-absorbing CeO_(2)@SiO_(2)nanoparticles effectively mitigated dye photodegradation,yielding exceptional UV stability(ΔT<2%under prolonged UV exposure).The filters also exhibited outstanding thermal stability(ΔT<1%after 30 min heat treatment at 230°C).This work establishes a robust materials design framework for multifunctional optical filters,advancing the development of highfidelity dual-mode color systems for next-generation display technologies.
基金funded by the Directorate General of Research and Development,Ministry of Higher Education,Science and Technology of the Republic of Indonesia,with grant number 2.6.63/UN32.14.1/LT/2025.
文摘Recommendation systems are an integral and indispensable part of every digital platform,as they can suggest content or items to users based on their respective needs.Collaborative filtering is a technique often used in various studies,which produces recommendations by analyzing similarities between users and items based on their behavior.Although often used,traditional collaborative filtering techniques still face the main challenge of sparsity.Sparsity problems occur when the data in the system is sparse,meaning that only a portion of users provide feedback on some items,resulting in inaccurate recommendations generated by the system.To overcome this problem,we developed aHybrid Collaborative Filtering model based onMatrix Factorization andGradient Boosting(HCF-MFGB),a new hybrid approach.Our proposed model integrates SVD++,the XGBoost ensemble learning algorithm,and utilizes user demographic data and meta items.We utilize information,both explicitly and implicitly,to learn user preference patterns using SVD++.The XGBoost algorithm is used to create hundreds of decision trees incrementally,thereby improving model accuracy.Meanwhile,user demographic and meta-item data are clustered using the K-Means Clustering algorithm to capture similarities in user and item characteristics.This combination is designed to improve rating prediction accuracy by reducing reliance on minimal explicit rating data,while addressing sparsity issues in movie recommendation systems.The results of experiments on the MovieLens 100K,MovieLens 1M,and CiaoDVD datasets show significant improvements,outperforming various other baselinemodels in terms of RMSE and MAE.On theMovieLens 100K dataset,the HCF-MFGB model obtained an RMSE value of 0.853 and an MAE value of 0.674.On theMovieLens 1M dataset,the HCF-MFGB model obtained an RMSE value of 0.763 and an MAE value of 0.61.On the CiaoDCD dataset,the HCF-MFGB model achieved an RMSE value of 0.718 and an MAE value of 0.495.These results confirm a significant improvement in movie recommendation accuracy with the proposed approach.
文摘This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temperature distribution,suitable for control design due to its balance between physical fidelity and computational simplicity.The controller uses a wavelet-based neural proportional,integral,derivative(PID)controller with IIR filtering(infinite impulse response).The dynamic model captures the essential heat and mass transfer phenomena through a nonlinear energy balance,where the cooling capacity“Qevap”is expressed as a non-linear function of the compressor frequency and the temperature difference,specifically,Q_(evap)=k_(1)u(T_(in)−T_(e))with u as compressor frequency,Te evaporator temperature,and Tin inlet fluid temperature.The operating conditions of the system,in general terms,focus on the following variables,the overall thermal capacity is 1000 J/K,typical for small-capacity heat exchangers,The mass flow is 0.05 kg/s,typical for secondary liquid cooling circuits,the overall loss coefficient of 50 W/K that corresponds to small evaporators with partial insulation,the temperatures(inlet)of 10℃and the temperature of environment of 25℃,thermal load of 200 W that corresponds to a small-scaled air conditioning applications.To handle system nonlinearities and improve control performance,aMorlet wavelet-based neural network(Wavenet)is used to dynamically adjust the PID gains online.An IIR filter is incorporated to smooth the adaptive gains,improving stability and reducing oscillations.In contrast to prior wavelet-or neural-adaptive PID controllers in HVAC applications,which typically adjust gains without explicit filtering or not tailored to evaporator dynamics,this work introduces the first PID–Wavenet scheme augmented with an IIR-based stabilization layer,specifically designed to address the combined challenges of nonlinear evaporator behavior,gain oscillation,and real-time implementability.The proposed controller(PID-Wavenet+IIR)is implemented and validated inMATLAB/Simulink,demonstrating superior performance compared to a conventional PID tuned using Simulink’s auto-tuning function.Key results include a reduction in settling time from 13.3 to 8.2 s,a reduction in overshoot from 3.5%to 0.8%,a reduction in steady-state error from 0.12℃ to 0.02℃and a 13%reduction in energy overall consumption.The controller also exhibits greater robustness and adaptability under varying thermal loads.This explicit integration of wavelet-driven adaptation with IIR-filtered gain shaping constitutes the main methodological contribution and novelty of the work.These findings validate the effectiveness of the wavelet-based adaptive approach for advanced thermal management in refrigeration and HVAC systems,with potential applications in controlling variable-speed compressors,liquid chillers,and compact cooling units.
基金supported by the National Natural Science Foundation of China under Grant No.62471366。
文摘This article proposes a generalized strongly coupled resonator quartet(GSCRQ)filter along with its synthesis approach.By introducing out-of-band reflection zeros(RZs),the proposed GSCRQ can generate a transmission zero on each side of the passband without negative couplings.The coupling coefficients in this coupling structure change with the positions of the out-of-band RZs.Thus,the GSCRQ configuration admits flexible design solutions.For GSCRQ coaxial combline filters,all couplings can be implemented as inductive couplings,simplifying the design and manufacturing process.In this article,a 6-2 filter in the GSCRQ configuration is synthesized and designed.The simulated results of the designed filter agree very well with the theoretical characteristics.
基金supported by the National Natural Science Foundation of China(62225303,62403043,62433004)the Beijing Natural Science Foundation(4244085)+1 种基金the Postdoctoral Fellowship Program of China Postdoctoral Science Foundation(GZC20230203)the China Postdoctoral Science Foundation(2023M740201)。
文摘Deep graph contrastive clustering has attracted widespread attentions due to its self-supervised representation learning paradigm and superior clustering performance.Although,two challenges emerge and result in high computational costs.Most existing contrastive methods adopt the data augmentation and then representation learning strategy,where representation learning with trainable graph convolution is coupled with complex and fixed data augmentation,inevitably limiting the efficiency and flexibility.The similarity metric between positive-negative sample pairs is complex and contrastive objective is partial,limiting the discriminability of representation learning.To solve these challenges,a novel wide graph clustering network(WGCN)adhering to representation and then augmentation framework is proposed,which mainly consists of multiorder filter fusion(MFF)and double-level contrastive learning(DCL)modules.Specifically,the MFF module integrates multiorder low-pass filters to extract smooth and multi-scale topological features,utilizing self-attention fusion to reduce redundancy and obtain comprehensive embedding representation.Further,the DCL module constructs two augmented views by the parallel parameter-unshared Siamese encoders rather than complex augmentations on graph.To achieve simple yet effective self-supervised learning,representation self-supervision and structural consistency oriented double-level contrastive loss is designed,where representation self-supervision maximizes the agreement between pairwise augmented embedding representations and structural consistency promotes the mutual information correlation between appending neighborhoods with similar semantics.Extensive experiments on six benchmark datasets demonstrate the superiority of the proposed WGCN,especially highlighting its time-saving characteristic.The code could be available in the https://github.com/Tianxiang Zhao0474/WGCN.
文摘胃肠动力障碍性疾病(disorders of gastrointestinal motility,DGIM)是指因胃肠动力失常引起的以消化道症状为主要临床表现的疾病。DGIM的发病率有逐年升高的趋势,降低人们生活质量的同时,还增加了社会的医疗支出。DGIM的发病机制尚未完全阐明,多项研究表明其发生发展与胃肠道动力异常关系密切。胃肠动力与胃肠道Cajal间质细胞(ICC)密切相关。ICC是胃肠道产生慢波运动的特殊细胞,ICC数量和形态的保持又与SCF/c-kit信号通路密切相关。近年来的研究表明,SCF/c-kit信号通路的异常改变可导致DGIM的发生。目前,DGIM的西医治疗主要为促动力及抑酸等对症治疗,在一定程度上能够缓解DGIM的症状,但常伴有不良反应,使药物的应用范围受限,而大量研究证实,中药、中药单体或成分、复方、中医外治法均可通过调节SCF/c-kit信号通路,有效改善胃肠动力的同时,不良反应较小。虽然中医药通过调控SCF/c-kit信号通路干预DGIM具有西医难以取代的独特优势,但目前中医药调控SCF/c-kit信号通路治疗DGIM系统综述仍较少。文章就SCF/c-kit信号通路与DGIM之间的相关性、中医药调控SCF/c-kit信号通路干预DGIM的作用机制进行系统性总结,旨在为临床治疗DGIM及新药研发提供新思考。
基金supported by grants from the National Natural Science Foundation of China(Grant No.31960585)Science and Technology Major Project of Guangxi(Grant No.Guike AA22068092)+1 种基金Guangxi Science and Technology Vanguard Special Action Project(Grant No.202204)State Key Laboratory for Conservation and Utilization of Subtropical Agro-bioresources(Grant Nos.SKLCUSA-a201906,SKLCU-SA-c201901)。
文摘The SKP1 gene is an important component of the SCF(SKP1-Cullin1-F-box)complex and serves as a bridge connecting the F-box and Cullin1genes(F-box-SKP1-Cullin1).The pattern of S-RNase being ubiquitously labelled by the SCF complex and degraded by the 26S protease accounts for the bulk of the available self-incompatibility studies.In this study,15 ClSKP1s from the‘Xiangshui'lemon genome and ubiquitome exist in the same SKP1 conserved domain(CD)as SKP1s in other species.The q PCR results showed that SKP1-6 and SKP1-14 have tissue expression patterns specific for expression in pollen.In addition,SKP1-6 and SKP1-14 in the stigma,style and ovary were significantly upregulated after self-pollination compared to those after cross-pollination.A subcellular location showed that SKP1-6 and SKP1-14 were located in the nucleus.In addition,yeast two-hybrid(Y2H)assays,bimolecular fluorescence complementation(BiFC)and luciferase complementation imaging(LCI)assays showed that SKP1-6 interacted with F-box1,F-box33,F-box34,F-box17,F-box19,Cullin1-2 and 26S proteasome subunit 4 homolog A(26S PS4HA).SKP1-14 interacted with F-box17,F-box19,F-box35,Cullin1-2 and 26S PS4HA.The interaction of Cullin1-2 and the F-box with SKP1 as a bridge was verified by a yeast three-hybrid experiment.The ability of S3-RNase to inhibit pollen and pollen tube growth and development was assessed using in vitro pollen co-culture experiments with recombinant S3-RNase proteins.Overall,this study provides important experimental evidence and theoretical basis for understanding the mechanism of self-incompatibility in plants by revealing the key role of the SCF complex in‘Xiangshui'lemon,which is bridged by ClSKP1-6,in self-incompatibility.The results of this study are of great significance for the future indepth exploration of the molecular mechanism of the SCF complex and its wide application in the self-incompatibility of plants.
基金supported by the National Natural Science Foundation of China under Grant No.62172132.
文摘The surge of large-scale models in recent years has led to breakthroughs in numerous fields,but it has also introduced higher computational costs and more complex network architectures.These increasingly large and intricate networks pose challenges for deployment and execution while also exacerbating the issue of network over-parameterization.To address this issue,various network compression techniques have been developed,such as network pruning.A typical pruning algorithm follows a three-step pipeline involving training,pruning,and retraining.Existing methods often directly set the pruned filters to zero during retraining,significantly reducing the parameter space.However,this direct pruning strategy frequently results in irreversible information loss.In the early stages of training,a network still contains much uncertainty,and evaluating filter importance may not be sufficiently rigorous.To manage the pruning process effectively,this paper proposes a flexible neural network pruning algorithm based on the logistic growth differential equation,considering the characteristics of network training.Unlike other pruning algorithms that directly reduce filter weights,this algorithm introduces a three-stage adaptive weight decay strategy inspired by the logistic growth differential equation.It employs a gentle decay rate in the initial training stage,a rapid decay rate during the intermediate stage,and a slower decay rate in the network convergence stage.Additionally,the decay rate is adjusted adaptively based on the filter weights at each stage.By controlling the adaptive decay rate at each stage,the pruning of neural network filters can be effectively managed.In experiments conducted on the CIFAR-10 and ILSVRC-2012 datasets,the pruning of neural networks significantly reduces the floating-point operations while maintaining the same pruning rate.Specifically,when implementing a 30%pruning rate on the ResNet-110 network,the pruned neural network not only decreases floating-point operations by 40.8%but also enhances the classification accuracy by 0.49%compared to the original network.
基金supported by the National Natural Science Foundation of China(No.61671485).
文摘With the rapid development of wireless techniques,the bandpass filter(BPF)is required to cover microwave and millimeter-wave frequency bands simultaneously with good mid-band suppression.However,it is difficult to implement such BPF due to the large frequency ratio and wideband rejection.This paper presents a superior method to realize a dual-band BPF with a large frequency ratio maintaining compact size and low design complexity.This is contributed by an ultra-wide stopband BPF with inherent discriminating excited degree at spurious frequencies.By properly arranging the feeding position and electrical length ratio of stepped impedance resonator(SIR),the excited degree at specific spurious frequencies can be flexibly adjusted to achieve desired suppression level without affecting characteristics at the fundamental passband.For validation,two BPFs were simulated,fabricated and measured,exhibiting suppression levels of 20.3 dB and 35 dB up to 18f0 and 10.53f0 respectively.Based on this,a dual-band BPF with a large frequency ratio can be easily constructed.For demonstration,a dual-band BPF operating at 3.55 GHz and 43.15 GHz is implemented.A frequency ratio up to 12.15 and mid-band suppression level better than 28 dB had been achieved.Advantages of compactness,simplicity and excellent performance of the proposed work can be observed.
