The high-quality assembly of Large Aircraft Components(LACs)is essential in modern aviation manufacturing.Numerical control locators are employed for the posture adjustment of LAC,yet the system's multi-input mult...The high-quality assembly of Large Aircraft Components(LACs)is essential in modern aviation manufacturing.Numerical control locators are employed for the posture adjustment of LAC,yet the system's multi-input multi-output,nonlinearity,and strong coupling presents significant challenges.The substantial internal force generated during the adjustment process can potentially damage the LAC and degrade the assembly quality.Hence,a workspace-based hybrid force position control scheme was developed to achieve high quality assembly with high-precision and lower internal force.Firstly,an offline workspace analysis with inherent geometric characteristics to form time-varying posture error constraint.Then,the posture error is integrated into the online position axis control to ensure tracking the ideal posture,while the force control axis compensates for posture deviation by minimizing internal force,thereby achieving high precision and low internal force.Finally,the effectiveness was demonstrated through experiments.The root mean square errors of orientation and position are 104 rad and 0.1 mm,respectively.A reduction in internal force can range from 10.96%to 57.4%compared to the traditional method.Key points'max position error is decreased from 0.32 mm to 0.18 mm,satisfying the 0.5 mm tolerance.Therefore,the proposed method will help promote the development of high-performance manufacturing.展开更多
A shaking table test was performed to investigate the different responses of piles with and without cement-soil reinforcement,considering both inertial and kinematic interactions.A comparison of the dynamic shear stre...A shaking table test was performed to investigate the different responses of piles with and without cement-soil reinforcement,considering both inertial and kinematic interactions.A comparison of the dynamic shear stress−strain hysteresis curves of soil profiles on the pile side with and without cement-soil reinforced piles indicates that cement-soil reinforced piles not only bear more tremendous shear stress but also have smaller strains under the action of cyclic shear stress.Furthermore,the cement-soil on the pile side not only shares part of the shear stress and modifies the bending moment distribution but also significantly enhances the resistance of the pile-side soil,reducing the lateral displacement of the superstructure.Cement-soil reinforcement reduced shear strains,inhibited sand liquefaction,and reduced superstructure displacements by 27%−47%(instantaneous)and 40%−65%(permanent).The proportion of horizontal load sharing between cement-soil reinforcement and saturated sand is considered,along with the change pattern of the subgrade reaction after sand liquefaction.An equivalent subgrade reaction calculation method is proposed,which accounts for the horizontal load-sharing ratios of soils with two different strengths.The test results indicate that the pile stress and displacement,estimated using the equivalent subgrade reaction,are in good agreement with the observed results.展开更多
Considering the Hamaker constant,inclusion size,and distance between inclusions on the surface of the molten steel,a new collision model of the inclusions on the surface of the molten steel was established based on in...Considering the Hamaker constant,inclusion size,and distance between inclusions on the surface of the molten steel,a new collision model of the inclusions on the surface of the molten steel was established based on in-situ observed results of the collision process of different types of inclusions on the surface of the molten steel.The developed model can be used to calculate the attraction of inclusions on the surface of the molten steel including Al_(2)O_(3)MgO,SiO_(2),etc.展开更多
Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pell...Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.展开更多
High entropy alloy attracts widespread attention due to its excellent mechanical properties.It becomes a new type of alloy material with high application potential,but the grinding performance of High entropy alloy re...High entropy alloy attracts widespread attention due to its excellent mechanical properties.It becomes a new type of alloy material with high application potential,but the grinding performance of High entropy alloy receives little attention.This paper conducts grinding simulation and surface grinding experiments on FeCoCrNi high entropy and alloys to analyze the grinding removal mechanism of the FeCoCrNi-based High entropy alloy.We also discuss the influence of grinding parameters,element types,element content and forming methods on grinding force and sub-surface plastic deformation after grinding.The simulation and experimental results show that as the increase of grinding depth,both tangential grinding force and normal grinding force increase,and the thickness of sub-surface plastic deformation layer decreases.With the increase of grinding speed,both tangential grinding force and normal grinding force decrease,and the thickness of sub-surface plastic deformation layer caused by grinding process shows a trend of gradual decrease.Under the same processing parameters,the normal grinding force is greater than the tangential grinding force.In FeCoCrNi series high entropy alloys,the grinding force and subsurface plastic deformation layer thickness of high entropy alloys increased with the addition in Ti content.The grinding force and plastic deformation formed by adding Ti element are greater than those formed by adding Al element,and High entropy alloys prepared using laser cladding method exhibit greater grinding force and plastic deformation than those prepared using selective laser melting method.The research results provide theoretical reference and experimental basis for high-quality grinding of high entropy alloys,which may be helpful for the design and manufacturing of high entropy alloy parts.展开更多
The rapid development of new-quality productive forces(NQPF)has intensified the demand for high-level innovative talent.As a representative of NQPF,generative artificial intelligence(GenAI)offers powerful tools to res...The rapid development of new-quality productive forces(NQPF)has intensified the demand for high-level innovative talent.As a representative of NQPF,generative artificial intelligence(GenAI)offers powerful tools to reshape talent cultivation but also presents significant challenges,including skill hollowing,ethical risks,and a growing disconnect between education and industry needs.Currently,graduate-level software engineering education struggles with outdated curricula and insufficient alignment with practical demands.In this paper,we propose a dual-core collaborative framework driven by“GenAI technology”and“industry demand”.Under this framework,we design a four-dimensional capability development path to enhance graduate students’innovation in software engineering practice.This path focuses on①scientific research innovation,②engineering problem-solving,③cross-domain collaborative evolution,and④ethical risk governance.The proposed approach promotes a shift from traditional knowledge transfer to human-machine collaborative innovation,aligning talent cultivation with the demands of the NQPF.展开更多
Understanding the complex interplay between structured light and particles is crucial for unlocking advanced optical manipulation techniques.However,existing theories for optical force/torque are often limited to smal...Understanding the complex interplay between structured light and particles is crucial for unlocking advanced optical manipulation techniques.However,existing theories for optical force/torque are often limited to small particles within the dipole regime or specific light fields,thereby lacking universality and sometimes leading to ambiguity.To overcome these limitations,we establish a fully analytical and comprehensive framework for optical force/torque based on the Cartesian multipole expansion theory,which is applicable to arbitrary-sized bi-isotropic(chiral)spherical particles immersed in arbitrary monochromatic optical fields.Rigorous expressions are thus derived,which explicitly bridge the optical force/torque with particle-propertydependent coefficients and“force/torque source”quantities characterizing the incident light structures.Such quantities identify the ultimate physical origins of optical force/torque and are systematically classified into four categories based on their parity(P)and duality(D)symmetries.Each category interacts selectively with particles exhibiting specific P and D(a)symmetries,thus inducing distinct optical forces or torques with characteristic physical behaviors.This classification establishes the mutual symmetry-breaking criteria necessary for both particles and light beams to generate optical force/torque,offering a physics-based roadmap for engineering optical manipulations such as chirality sorting,light-driven micromotors,and beyond.展开更多
In the context of the coordinated pursuit of"carbon peak and neutrality"objectives,alongside the strategy to establish a robust agricultural nation,the economic and social development of rural areas is under...In the context of the coordinated pursuit of"carbon peak and neutrality"objectives,alongside the strategy to establish a robust agricultural nation,the economic and social development of rural areas is undergoing a profound paradigm shift.The traditional rural division of labor pattern,which depends on tangible factors such as land,labor,and capital,has increasingly encountered developmental challenges characterized by diminishing marginal returns and a detrimental cycle of internal competition.The new quality productive force,centered on data,algorithms,green technologies,bioengineering,and clean energy,offers a potential pathway for the rural division of labor system to overcome the"low-level equilibrium".This force is characterized by attributes such as non-exclusivity,replicability,network collaboration,and ecological compatibility.This paper develops a three-dimensional collaborative analytical framework encompassing"technology,institution,and culture".It systematically elucidates the internal logic by which new quality productive forces drive the transformation of the rural division of labor from"quantitative factor matching"to"qualitative structural reorganization"through three principal mechanisms:technology embedding,institutional reconstruction,and cultural coupling.Furthermore,the study proposes corresponding policy recommendations,thereby offering theoretical insights to support the modernization of China s agriculture and rural areas,as well as the development of a strong agricultural country.展开更多
The surfaces of brittle materials are susceptible to defects such as scratches,cracks,and chipping during con-ventional grinding processes,which significantly compromise surface quality and service performance.A flexi...The surfaces of brittle materials are susceptible to defects such as scratches,cracks,and chipping during con-ventional grinding processes,which significantly compromise surface quality and service performance.A flexible ball-end body-armor-like abrasive tool(BAAT)can effectively remove micro-convex peaks from the surfaces of brittle materials by employing a high tangential grinding force and a low normal grinding force,thereby achieving nano-level surface roughness and ultra-smooth mirror finishes.However,the surface contact me-chanism,pressure distribution pattern,and grinding force behavior between BAAT and workpiece remain in-adequately understood.This study examines the mechanism of liquid film formation and the distribution pattern of elastohydrodynamic pressure in high-shear and low-pressure grinding areas,drawing on the theories of elastohydrodynamic lubrication,non-Newtonian fluid dynamics,and material mechanics.A high-shear low-pressure grinding force model,which incorporates elastohydrodynamic liquid film thickness and abrasive grain size,was developed.The effects of the main grinding parameters(normal load,spindle rotational speed,and abrasive grain size)on the tangential grinding force were investigated through the processing of lithium niobate crystals using an intelligent precision-grinding system.The experimental results indicated that the relative error between the predicted and experimental values was 10.74%,thereby confirming the accuracy of the grinding force model.This study advances the understanding of elastohydrodynamic lubrication mechanisms in abrasive machining and provides a crucial theoretical foundation for the application of flexible ball-end BAAT.展开更多
Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properti...Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properties.The integration of FG materials with auxetic structures enhances their adaptability in advanced engineering applications.However,understanding their dynamic behavior under external excitations is essential for optimal design and structural reliability.Nonlinear interactions in such structures pose significant challenges in vibration analysis,necessitating robust analytical methods.This study presents a closed-form solution for the nonlinear forced vibration analysis of sandwich FG auxetic beams,offering an accurate and efficient method for predicting their dynamic response.The beam consists of two FG face sheets with material properties varying through the thickness and a re-entrant honeycomb auxetic core with an adjustable Poisson's ratio.The governing nonlinear equations of motion are derived using the first-order shear deformation theory(FSDT),the modified Gibson model,and the von Kármán relations,formulated through Hamilton's principle.A closed-form solution is obtained via the Galerkin method and multiple-scale technique.The results demonstrate that FG layers enable control of the overweight and dynamic response amplitude,with positive power law indexes reducing weight.Comparisons with finite element results confirm the accuracy of the proposed formulation.展开更多
Manned aerial vehicle-unmanned aerial vehicle(MAV-UAV)combat organization is a MAV-UAV combat collective formed from the perspective of organization design theory and methodology,and the generation of force formation ...Manned aerial vehicle-unmanned aerial vehicle(MAV-UAV)combat organization is a MAV-UAV combat collective formed from the perspective of organization design theory and methodology,and the generation of force formation plan is a key step in the organizational planning.Based on the description of the problem and the definition of organizational elements,the matching model of platform-target attack wave is constructed to minimize the redundancy of command and decision-making capability,resource capability and the number of platforms used.Based on the non-dominated sorting genetic algorithmⅢ(NSGA-Ⅲ)framework,which includes encoding/decoding method and constraint handling method,the generation model of organizational force formation plan is solved,and the effectiveness and superiority of the algorithm are verified by simulation experiments.展开更多
Digital modeling and autonomous control of the die forging process are significant challenges in realizing high-quality intelli-gent forging of components.Using the die forging of AA2014 aluminum alloy as a case study...Digital modeling and autonomous control of the die forging process are significant challenges in realizing high-quality intelli-gent forging of components.Using the die forging of AA2014 aluminum alloy as a case study,a machine-learning-assisted method for di-gital modeling of the forging force and autonomous control in response to forging parameter disturbances was proposed.First,finite ele-ment simulations of the forging processes were conducted under varying friction factors,die temperatures,billet temperatures,and for-ging velocities,and the sample data,including process parameters and forging force under different forging strokes,were gathered.Pre-diction models for the forging force were established using the support vector regression algorithm.The prediction error of F_(f),that is,the forging force required to fill the die cavity fully,was as low as 4.1%.To further improve the prediction accuracy of the model for the ac-tual F_(f),two rounds of iterative forging experiments were conducted using the Bayesian optimization algorithm,and the prediction error of F_(f) in the forging experiments was reduced from 6.0%to 1.5%.Finally,the prediction model of F_(f) combined with a genetic algorithm was used to establish an autonomous optimization strategy for the forging velocity at each stage of the forging stroke,when the billet and die temperatures were disturbed,which realized the autonomous control in response to disturbances.In cases of−20 or−40℃ reductions in the die and billet temperatures,forging experiments conducted with the autonomous optimization strategy maintained the measured F_(f) around the target value of 180 t,with the relative error ranging from−1.3%to+3.1%.This work provides a reference for the study of di-gital modeling and autonomous optimization control of quality factors in the forging process.展开更多
Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive ...Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.展开更多
Unbalanced force produced by the unbalanced mass will affect vibrations of rotor systems,which probably results in the components failures of rotating machinery.To study the effects of unbalanced mass on the vibration...Unbalanced force produced by the unbalanced mass will affect vibrations of rotor systems,which probably results in the components failures of rotating machinery.To study the effects of unbalanced mass on the vibration characteristics of rotor systems,a flexible rotor system model considering the unbalanced mass is proposed.The time-varying bearing force is considered.The developed model is verified by the experimental and theoretical frequency spectrums.The displacements and axis orbits of flexible and rigid rotor systems are compared.The results show that the unbalanced mass will affect the vibration characteristics of rotor system.This model can be more suitable and effective to calculate vibration characteristics of rotor system with the flexible deformation and unbalanced mass.This paper provides a new reference and research method for predicting the vibrations of flexible rotor system considering the unbalanced mass.展开更多
This study proposes a framework for the concept of“new quality productive forces”in the ice and snow economy(ISE)as a strategic response to global climate change and the demands of technological and industrial trans...This study proposes a framework for the concept of“new quality productive forces”in the ice and snow economy(ISE)as a strategic response to global climate change and the demands of technological and industrial transformation for high-quality development.These new quality productive forces in the ISE have developed alongside the zonal distribution of natural resources,strictly adhere to ecological principles,and integrate value transformation mechanisms specific to ice and snow resources.Their development is projected to generate multiple benefits across ecological,economic,and social dimensions.The new quality productive forces in the ISE are characterized by technology-driven resource development,synergistic integration across the entire ice and snow industry value chain,and a focus on high-quality,green growth.Grounded in geography and economics,the new quality productive forces in the ISE link scientific innovation,the reallocation of productive factors,and industrial upgrading within the context of resource constraints.Furthermore,they expand the growth potential of the ISE by fostering new production relations through digital,intelligent,and green integration,while advancing low-carbon,sustainable development under the guiding principle that“ice and snow landscapes are also mountains of gold and silver.”For China's ISE,these new quality productive forces emphasize rigorous resource protection,balanced human-environment relationships,a resilient integrated supply chain framework,and an efficient“dual circulation”economic model.Practical strategies include integrating production factors,optimizing spatial resource allocation,fostering industrial synergy,and adapting production relations,all aimed at advancing the sustainable and high-quality development of China's ISE.展开更多
A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which ca...A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.展开更多
Moles exhibit highly effective capabilities due to their unique body structures and digging techniques,making them ideal models for biomimetic research.However,a major challenge for mole-inspired robots lies in overco...Moles exhibit highly effective capabilities due to their unique body structures and digging techniques,making them ideal models for biomimetic research.However,a major challenge for mole-inspired robots lies in overcoming resistance in granular media when burrowing with forelimbs.In the absence of effective forepaw design strategies,most robotic designs rely on increased power to enhance performance.To address this issue,this paper employs Resistive Force Theory to optimize mole-inspired forepaws,aiming to enhance burrowing efficiency.By analyzing the relationship between geometric parameters and burrowing forces,we propose several forepaw design variations.Through granular resistance assessments,an effective forepaw configuration is identified and further refined using parameters such as longitudinal and transverse curvature.Subsequently,the Particle Swarm Optimization algorithm is applied to determine the optimal forepaw design.In force-loading tests,the optimized forepaw demonstrated a 79.44%reduction in granular lift force and a 22.55%increase in propulsive force compared with the control group.In robotic burrowing experiments,the optimized forepaw achieved the longest burrow displacement(179.528 mm)and the lowest burrowing lift force(0.9355 mm/s),verifying its effectiveness in reducing the lift force and enhancing the propulsive force.展开更多
基金co-supported by the National Natural Science Foundation of China(No.52125504)the Liaoning Revitalization Talents Program(No.XLYC2202017)Dalian Support Policy Project for Innovation of Technological Talents(No.2023RG001)。
文摘The high-quality assembly of Large Aircraft Components(LACs)is essential in modern aviation manufacturing.Numerical control locators are employed for the posture adjustment of LAC,yet the system's multi-input multi-output,nonlinearity,and strong coupling presents significant challenges.The substantial internal force generated during the adjustment process can potentially damage the LAC and degrade the assembly quality.Hence,a workspace-based hybrid force position control scheme was developed to achieve high quality assembly with high-precision and lower internal force.Firstly,an offline workspace analysis with inherent geometric characteristics to form time-varying posture error constraint.Then,the posture error is integrated into the online position axis control to ensure tracking the ideal posture,while the force control axis compensates for posture deviation by minimizing internal force,thereby achieving high precision and low internal force.Finally,the effectiveness was demonstrated through experiments.The root mean square errors of orientation and position are 104 rad and 0.1 mm,respectively.A reduction in internal force can range from 10.96%to 57.4%compared to the traditional method.Key points'max position error is decreased from 0.32 mm to 0.18 mm,satisfying the 0.5 mm tolerance.Therefore,the proposed method will help promote the development of high-performance manufacturing.
基金Project(52078129)supported by the National Natural Science Foundation of ChinaProject(MTF2023009)supported by the Open Project of Key Laboratory of Transport Industry of Comprehensive Transportation Theory(Nanjing Modern Multimodal Transportation Laboratory),ChinaProject(2242024K40037)supported by the Fundamental Research Funds for the Central Universities,China。
文摘A shaking table test was performed to investigate the different responses of piles with and without cement-soil reinforcement,considering both inertial and kinematic interactions.A comparison of the dynamic shear stress−strain hysteresis curves of soil profiles on the pile side with and without cement-soil reinforced piles indicates that cement-soil reinforced piles not only bear more tremendous shear stress but also have smaller strains under the action of cyclic shear stress.Furthermore,the cement-soil on the pile side not only shares part of the shear stress and modifies the bending moment distribution but also significantly enhances the resistance of the pile-side soil,reducing the lateral displacement of the superstructure.Cement-soil reinforcement reduced shear strains,inhibited sand liquefaction,and reduced superstructure displacements by 27%−47%(instantaneous)and 40%−65%(permanent).The proportion of horizontal load sharing between cement-soil reinforcement and saturated sand is considered,along with the change pattern of the subgrade reaction after sand liquefaction.An equivalent subgrade reaction calculation method is proposed,which accounts for the horizontal load-sharing ratios of soils with two different strengths.The test results indicate that the pile stress and displacement,estimated using the equivalent subgrade reaction,are in good agreement with the observed results.
基金support from the National Natural Science Foundation of China(Grant No.U22A20171)the National Key Research and Development Program Project(2023YFB3709901)+3 种基金the China Baowu Low Carbon Metallurgical Innovation Fund(BWLCF202315)the Pangang-USTB Vanadium and Titanium Research Institute Research Projectthe High Steel Center(HSC)at North China University of TechnologyYanshan University and University of Science and Technology Beijing,China.
文摘Considering the Hamaker constant,inclusion size,and distance between inclusions on the surface of the molten steel,a new collision model of the inclusions on the surface of the molten steel was established based on in-situ observed results of the collision process of different types of inclusions on the surface of the molten steel.The developed model can be used to calculate the attraction of inclusions on the surface of the molten steel including Al_(2)O_(3)MgO,SiO_(2),etc.
基金financial support by the National Key Research and Development Program of China(No.2023YFC2907801)the Hunan Provincial Natural Science Foundation of China(No.2023JJ40760)the Scientific and Technological Project of Yunnan Precious Metals Laboratory,China(No.YPML-2023050276)。
文摘Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.
基金Supported by National Natural Science Foundation of China(Grant No.52275412)Fundamental Research Funds for the Central Universities of China(Grant No.N2403015).
文摘High entropy alloy attracts widespread attention due to its excellent mechanical properties.It becomes a new type of alloy material with high application potential,but the grinding performance of High entropy alloy receives little attention.This paper conducts grinding simulation and surface grinding experiments on FeCoCrNi high entropy and alloys to analyze the grinding removal mechanism of the FeCoCrNi-based High entropy alloy.We also discuss the influence of grinding parameters,element types,element content and forming methods on grinding force and sub-surface plastic deformation after grinding.The simulation and experimental results show that as the increase of grinding depth,both tangential grinding force and normal grinding force increase,and the thickness of sub-surface plastic deformation layer decreases.With the increase of grinding speed,both tangential grinding force and normal grinding force decrease,and the thickness of sub-surface plastic deformation layer caused by grinding process shows a trend of gradual decrease.Under the same processing parameters,the normal grinding force is greater than the tangential grinding force.In FeCoCrNi series high entropy alloys,the grinding force and subsurface plastic deformation layer thickness of high entropy alloys increased with the addition in Ti content.The grinding force and plastic deformation formed by adding Ti element are greater than those formed by adding Al element,and High entropy alloys prepared using laser cladding method exhibit greater grinding force and plastic deformation than those prepared using selective laser melting method.The research results provide theoretical reference and experimental basis for high-quality grinding of high entropy alloys,which may be helpful for the design and manufacturing of high entropy alloy parts.
基金supported in part by the Graduate Education Reform Research Project of Hubei University of Technology under Grant 2024YB003the Hubei University of Arts and Science,Teaching Research Project,under Grant JY2025018.
文摘The rapid development of new-quality productive forces(NQPF)has intensified the demand for high-level innovative talent.As a representative of NQPF,generative artificial intelligence(GenAI)offers powerful tools to reshape talent cultivation but also presents significant challenges,including skill hollowing,ethical risks,and a growing disconnect between education and industry needs.Currently,graduate-level software engineering education struggles with outdated curricula and insufficient alignment with practical demands.In this paper,we propose a dual-core collaborative framework driven by“GenAI technology”and“industry demand”.Under this framework,we design a four-dimensional capability development path to enhance graduate students’innovation in software engineering practice.This path focuses on①scientific research innovation,②engineering problem-solving,③cross-domain collaborative evolution,and④ethical risk governance.The proposed approach promotes a shift from traditional knowledge transfer to human-machine collaborative innovation,aligning talent cultivation with the demands of the NQPF.
基金supported by the National Natural Science Foundation of China(Grant Nos.12204117,12564043,12174076,12074084,and 12074169)the Guangxi Science and Technology Project(Grant Nos.2023GXNSFFA026002,2024GXNSFBA010261,2021GXNSFDA196001,and AD23026117)+3 种基金the Open Project of State Key Laboratory of Surface Physics in Fudan University(Grant No.KF2022_15)the Guangdong Province Talent Recruitment Program(Grant No.2021QN02C103)supported by the Research Grants Council of Hong Kong(Grant Nos.16310422 and AoE/P-502/20)the Innovation Project of Guangxi Graduate Education(Grant No.11241018)。
文摘Understanding the complex interplay between structured light and particles is crucial for unlocking advanced optical manipulation techniques.However,existing theories for optical force/torque are often limited to small particles within the dipole regime or specific light fields,thereby lacking universality and sometimes leading to ambiguity.To overcome these limitations,we establish a fully analytical and comprehensive framework for optical force/torque based on the Cartesian multipole expansion theory,which is applicable to arbitrary-sized bi-isotropic(chiral)spherical particles immersed in arbitrary monochromatic optical fields.Rigorous expressions are thus derived,which explicitly bridge the optical force/torque with particle-propertydependent coefficients and“force/torque source”quantities characterizing the incident light structures.Such quantities identify the ultimate physical origins of optical force/torque and are systematically classified into four categories based on their parity(P)and duality(D)symmetries.Each category interacts selectively with particles exhibiting specific P and D(a)symmetries,thus inducing distinct optical forces or torques with characteristic physical behaviors.This classification establishes the mutual symmetry-breaking criteria necessary for both particles and light beams to generate optical force/torque,offering a physics-based roadmap for engineering optical manipulations such as chirality sorting,light-driven micromotors,and beyond.
基金Supported by Key Project of Jiangsu Education Science Planning"Research on the Structural Adjustment of Higher Education in Jiangsu in the Context of High-Quality Economic Development"(B/2021/01/67).
文摘In the context of the coordinated pursuit of"carbon peak and neutrality"objectives,alongside the strategy to establish a robust agricultural nation,the economic and social development of rural areas is undergoing a profound paradigm shift.The traditional rural division of labor pattern,which depends on tangible factors such as land,labor,and capital,has increasingly encountered developmental challenges characterized by diminishing marginal returns and a detrimental cycle of internal competition.The new quality productive force,centered on data,algorithms,green technologies,bioengineering,and clean energy,offers a potential pathway for the rural division of labor system to overcome the"low-level equilibrium".This force is characterized by attributes such as non-exclusivity,replicability,network collaboration,and ecological compatibility.This paper develops a three-dimensional collaborative analytical framework encompassing"technology,institution,and culture".It systematically elucidates the internal logic by which new quality productive forces drive the transformation of the rural division of labor from"quantitative factor matching"to"qualitative structural reorganization"through three principal mechanisms:technology embedding,institutional reconstruction,and cultural coupling.Furthermore,the study proposes corresponding policy recommendations,thereby offering theoretical insights to support the modernization of China s agriculture and rural areas,as well as the development of a strong agricultural country.
基金Supported by National Natural Science Foundation of China(Grant Nos.52575516,51875329)Taishan Scholar Special Foundation of Shandong Province(Grant Nos.tstp20240826,tsqn201812064)+2 种基金Shandong Provincial Natural Science Foundation(Grant No.ZR2023ME112)Key Research and Development Project of the Ningxia Hui Autonomous Region(Grant No.2024BEE02019)Innovation Capacity Improvement Programme for High-tech SMEs of Shandong Province(Grant Nos.2022TSGC1333,2022TSGC1261).
文摘The surfaces of brittle materials are susceptible to defects such as scratches,cracks,and chipping during con-ventional grinding processes,which significantly compromise surface quality and service performance.A flexible ball-end body-armor-like abrasive tool(BAAT)can effectively remove micro-convex peaks from the surfaces of brittle materials by employing a high tangential grinding force and a low normal grinding force,thereby achieving nano-level surface roughness and ultra-smooth mirror finishes.However,the surface contact me-chanism,pressure distribution pattern,and grinding force behavior between BAAT and workpiece remain in-adequately understood.This study examines the mechanism of liquid film formation and the distribution pattern of elastohydrodynamic pressure in high-shear and low-pressure grinding areas,drawing on the theories of elastohydrodynamic lubrication,non-Newtonian fluid dynamics,and material mechanics.A high-shear low-pressure grinding force model,which incorporates elastohydrodynamic liquid film thickness and abrasive grain size,was developed.The effects of the main grinding parameters(normal load,spindle rotational speed,and abrasive grain size)on the tangential grinding force were investigated through the processing of lithium niobate crystals using an intelligent precision-grinding system.The experimental results indicated that the relative error between the predicted and experimental values was 10.74%,thereby confirming the accuracy of the grinding force model.This study advances the understanding of elastohydrodynamic lubrication mechanisms in abrasive machining and provides a crucial theoretical foundation for the application of flexible ball-end BAAT.
文摘Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properties.The integration of FG materials with auxetic structures enhances their adaptability in advanced engineering applications.However,understanding their dynamic behavior under external excitations is essential for optimal design and structural reliability.Nonlinear interactions in such structures pose significant challenges in vibration analysis,necessitating robust analytical methods.This study presents a closed-form solution for the nonlinear forced vibration analysis of sandwich FG auxetic beams,offering an accurate and efficient method for predicting their dynamic response.The beam consists of two FG face sheets with material properties varying through the thickness and a re-entrant honeycomb auxetic core with an adjustable Poisson's ratio.The governing nonlinear equations of motion are derived using the first-order shear deformation theory(FSDT),the modified Gibson model,and the von Kármán relations,formulated through Hamilton's principle.A closed-form solution is obtained via the Galerkin method and multiple-scale technique.The results demonstrate that FG layers enable control of the overweight and dynamic response amplitude,with positive power law indexes reducing weight.Comparisons with finite element results confirm the accuracy of the proposed formulation.
基金supported by the Natural Science Foundation of Shaanxi Province(2023-JC-QN-0728)the China Postdoctoral Science Foundation(2021M693942)。
文摘Manned aerial vehicle-unmanned aerial vehicle(MAV-UAV)combat organization is a MAV-UAV combat collective formed from the perspective of organization design theory and methodology,and the generation of force formation plan is a key step in the organizational planning.Based on the description of the problem and the definition of organizational elements,the matching model of platform-target attack wave is constructed to minimize the redundancy of command and decision-making capability,resource capability and the number of platforms used.Based on the non-dominated sorting genetic algorithmⅢ(NSGA-Ⅲ)framework,which includes encoding/decoding method and constraint handling method,the generation model of organizational force formation plan is solved,and the effectiveness and superiority of the algorithm are verified by simulation experiments.
基金financially supported by the National Key Research and Development Program of China(No.2022YFB3706901)the National Natural Science Foundation of China(No.52090041)the Young Elite Scientists Sponsorship Program by CAST(No.2022QNRC 001).
文摘Digital modeling and autonomous control of the die forging process are significant challenges in realizing high-quality intelli-gent forging of components.Using the die forging of AA2014 aluminum alloy as a case study,a machine-learning-assisted method for di-gital modeling of the forging force and autonomous control in response to forging parameter disturbances was proposed.First,finite ele-ment simulations of the forging processes were conducted under varying friction factors,die temperatures,billet temperatures,and for-ging velocities,and the sample data,including process parameters and forging force under different forging strokes,were gathered.Pre-diction models for the forging force were established using the support vector regression algorithm.The prediction error of F_(f),that is,the forging force required to fill the die cavity fully,was as low as 4.1%.To further improve the prediction accuracy of the model for the ac-tual F_(f),two rounds of iterative forging experiments were conducted using the Bayesian optimization algorithm,and the prediction error of F_(f) in the forging experiments was reduced from 6.0%to 1.5%.Finally,the prediction model of F_(f) combined with a genetic algorithm was used to establish an autonomous optimization strategy for the forging velocity at each stage of the forging stroke,when the billet and die temperatures were disturbed,which realized the autonomous control in response to disturbances.In cases of−20 or−40℃ reductions in the die and billet temperatures,forging experiments conducted with the autonomous optimization strategy maintained the measured F_(f) around the target value of 180 t,with the relative error ranging from−1.3%to+3.1%.This work provides a reference for the study of di-gital modeling and autonomous optimization control of quality factors in the forging process.
基金financially supported by the National Natural Science Foundation of China(Nos.52272160,U2330112,and 52002254)Sichuan Science and Technology Foundation(Nos.2020YJ0262,2021YFH0127,2022YFH0083,2022YFSY0045,and 2023YFSY0002)+1 种基金the Chunhui Plan of Ministry of Education,Fundamental Research Funds for the Central Universities,China(No.YJ201893)the Foundation of Key Laboratory of Lidar and Device,Sichuan Province,China(No.LLD2023-006)。
文摘Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.
基金Support by Shanxi Provincial Key Research and Development Plan of China(Grant No.2024GH-ZDXM-29)National Natural Science Foundation of China(Grant No.52175120)Shaanxi Provincial Innovation Capability Support Program of China(Grant No.2024RS-CXTD-15)。
文摘Unbalanced force produced by the unbalanced mass will affect vibrations of rotor systems,which probably results in the components failures of rotating machinery.To study the effects of unbalanced mass on the vibration characteristics of rotor systems,a flexible rotor system model considering the unbalanced mass is proposed.The time-varying bearing force is considered.The developed model is verified by the experimental and theoretical frequency spectrums.The displacements and axis orbits of flexible and rigid rotor systems are compared.The results show that the unbalanced mass will affect the vibration characteristics of rotor system.This model can be more suitable and effective to calculate vibration characteristics of rotor system with the flexible deformation and unbalanced mass.This paper provides a new reference and research method for predicting the vibrations of flexible rotor system considering the unbalanced mass.
基金The Third Scientific Expedition Project in Xinjiang,No.2022xjkk0905Project Commissioned by the General Administration of Sport of ChinaProject Commissioned by the Ministry of Culture and Tourism of the People’s Republic of China。
文摘This study proposes a framework for the concept of“new quality productive forces”in the ice and snow economy(ISE)as a strategic response to global climate change and the demands of technological and industrial transformation for high-quality development.These new quality productive forces in the ISE have developed alongside the zonal distribution of natural resources,strictly adhere to ecological principles,and integrate value transformation mechanisms specific to ice and snow resources.Their development is projected to generate multiple benefits across ecological,economic,and social dimensions.The new quality productive forces in the ISE are characterized by technology-driven resource development,synergistic integration across the entire ice and snow industry value chain,and a focus on high-quality,green growth.Grounded in geography and economics,the new quality productive forces in the ISE link scientific innovation,the reallocation of productive factors,and industrial upgrading within the context of resource constraints.Furthermore,they expand the growth potential of the ISE by fostering new production relations through digital,intelligent,and green integration,while advancing low-carbon,sustainable development under the guiding principle that“ice and snow landscapes are also mountains of gold and silver.”For China's ISE,these new quality productive forces emphasize rigorous resource protection,balanced human-environment relationships,a resilient integrated supply chain framework,and an efficient“dual circulation”economic model.Practical strategies include integrating production factors,optimizing spatial resource allocation,fostering industrial synergy,and adapting production relations,all aimed at advancing the sustainable and high-quality development of China's ISE.
基金supported in part by financial support from the National Key R&D Program of China(No.2023YFB3407003)the National Natural Science Foundation of China(No.52375378).
文摘A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.
基金financially supported in-part by the National Natural Science Foundation of China(52275011)the Natural Science Foundation of Guangdong Province(2023B1515020080)+3 种基金the Natural Science Foundation of Guangzhou(2024A04J2552)the Fundamental Research Funds for the Central Universities,the Young Elite Scientists Sponsorship Program by the China Association for Science and Technology(CAST)(2021QNRC001)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2023A1515011253)the Higher Education Institution Featured Innovation Project of Department of Education of Guangdong Province(GrantNo.2023KTSCX138).
文摘Moles exhibit highly effective capabilities due to their unique body structures and digging techniques,making them ideal models for biomimetic research.However,a major challenge for mole-inspired robots lies in overcoming resistance in granular media when burrowing with forelimbs.In the absence of effective forepaw design strategies,most robotic designs rely on increased power to enhance performance.To address this issue,this paper employs Resistive Force Theory to optimize mole-inspired forepaws,aiming to enhance burrowing efficiency.By analyzing the relationship between geometric parameters and burrowing forces,we propose several forepaw design variations.Through granular resistance assessments,an effective forepaw configuration is identified and further refined using parameters such as longitudinal and transverse curvature.Subsequently,the Particle Swarm Optimization algorithm is applied to determine the optimal forepaw design.In force-loading tests,the optimized forepaw demonstrated a 79.44%reduction in granular lift force and a 22.55%increase in propulsive force compared with the control group.In robotic burrowing experiments,the optimized forepaw achieved the longest burrow displacement(179.528 mm)and the lowest burrowing lift force(0.9355 mm/s),verifying its effectiveness in reducing the lift force and enhancing the propulsive force.
