Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
We take the established inductively coupled plasma(ICP) wind tunnel as a research object to investigate the thermal protection system of re-entry vehicles. A 1.2-MW high power ICP wind tunnel is studied through numeri...We take the established inductively coupled plasma(ICP) wind tunnel as a research object to investigate the thermal protection system of re-entry vehicles. A 1.2-MW high power ICP wind tunnel is studied through numerical simulation and experimental validation. The distribution characteristics and interaction mechanism of the flow field and electromagnetic field of the ICP wind tunnel are investigated using the multi-field coupling method of flow, electromagnetic, chemical, and thermodynamic field. The accuracy of the numerical simulation is validated by comparing the experimental results with the simulation results. Thereafter, the wind tunnel pressure, air velocity, electron density, Joule heating rate, Lorentz force, and electric field intensity obtained using the simulation are analyzed and discussed. The results indicate that for the 1.2-MW ICP wind tunnel, the maximum values of temperature, pressure, electron number density, and other parameters are observed during coil heating. The influence of the radial Lorentz force on the momentum transfer is stronger than that of the axial Lorentz force. The electron number density at the central axis and the amplitude and position of the Joule heating rate are affected by the radial Lorentz force. Moreover, the plasma in the wind tunnel is constantly in the subsonic flow state, and a strong eddy flow is easily generated at the inlet of the wind tunnel.展开更多
Two full 3D steady mathematical models are developed by finite element method （FEM） to calcalate coupled physics fields. the electro-magnetic model is built and solved first and so is the fluid motion model with the...Two full 3D steady mathematical models are developed by finite element method （FEM） to calcalate coupled physics fields. the electro-magnetic model is built and solved first and so is the fluid motion model with the acquired electromagnetic force as source body forces in Navier-Stokes equations. Effects caused by the ferromagnetic shell, busbar system around, and open boundary problem as well as inside induced current were considered in terms of the magnetic field. Furthermore, a new modeling method is found to set up solid models and then mesh them entirely with so-called structuralized grids, namely hex-mesh. Examples of 75kA prebaked cell with two kinds of busbar arrangements are presented. Results agree with those disclosed in the literature and confirm that the coupled simulation is valid. It is also concluded that the usage of these models facilitates the consistent analysis of the electric field to magnetic field and then flow motion to the greater extent, local distributions of current density and magnetic flux density are very much dependent on the cell structure, the steel shell is a shield to reduce the magnetic field and flow pattern is two dimensional in the main body of the metal pad.展开更多
When charged bodies come up close to each other,the field energy is diffused and their states are regulated under bidirectional field coupling.For biological neurons,the diversity in intrinsic electric and magnetic fi...When charged bodies come up close to each other,the field energy is diffused and their states are regulated under bidirectional field coupling.For biological neurons,the diversity in intrinsic electric and magnetic field energy can create synaptic connection for fast energy balance and synaptic current is passed across the synapse channel;as a result,energy is pumped and exchanged to induce synchronous firing modes.In this paper,a capacitor is used to connect two neural circuits and energy propagation is activated along the coupling channel.The intrinsic field energy in the two neural circuits is exchanged and the coupling intensity is controlled adaptively using the Heaviside function.Some field energy is saved in the coupling channel and is then sent back to the coupled neural circuits to reach energy balance.Therefore the circuits can reach possible energy balance and complete synchronization.It is possible that the diffusive energy of the coupled neurons inspires the synaptic connections to grow stronger for possible energy balance.展开更多
The electron heating characteristics of magnetic enhancement capacitively coupled argon plasmas in presence of both longitudinal and transverse uniform magnetic field have been explored through both theoretical and nu...The electron heating characteristics of magnetic enhancement capacitively coupled argon plasmas in presence of both longitudinal and transverse uniform magnetic field have been explored through both theoretical and numerical calculations.It is found that the longitudinal magnetic field can affect the heating by changing the level of the pressure heating along the longitudinal direction and that of the Ohmic heating along the direction which is perpendicular to both driving electric field and the applied transverse magnetic field,and a continuously increased longitudinal magnetic field can induce pressure heating to become dominant.Moreover,the electron temperature as well as proportion of some low energy electrons will increase if a small longitudinal magnetic field is introduced,which is attributed to the increased average electron energy.We believe that the research will provide guidance for optimizing the magnetic field configuration of some discharge systems having both transverse and longitudinal magnetic field.展开更多
Magnetohydrodynamic(MHD)induction pumps are contactless pumps able to withstand harsh environments.The rate of fluid flow through the pump directly affects the efficiency and stability of the device.To explore the inf...Magnetohydrodynamic(MHD)induction pumps are contactless pumps able to withstand harsh environments.The rate of fluid flow through the pump directly affects the efficiency and stability of the device.To explore the influence of induction pump settings on the related delivery speed,in this study,a numerical model for coupled electromagnetic and flow field effects is introduced and used to simulate liquid metal lithium flow in the induction pump.The effects of current intensity,frequency,coil turns and coil winding size on the velocity of the working fluid are analyzed.It is shown that the first three parameters have a significant impact,while changes in the coil turns have a negligible influence.The maximum increase in working fluid velocity within the pump for the parameter combination investigated in this paper is approximately 618%.As the frequency is increased from 20 to 60 Hz,the maximum increase in the mean flow rate of the working fluid is approximately 241%.These research findings are intended to support the design and optimization of these devices.展开更多
It is difficult to accurately calculate the short-circuit impedance, due to the complexity of axial dual-low-voltage split-winding transformer winding structure. In this paper, firstly, the leakage magnetic field and ...It is difficult to accurately calculate the short-circuit impedance, due to the complexity of axial dual-low-voltage split-winding transformer winding structure. In this paper, firstly, the leakage magnetic field and short-circuit impedance model of axial dual-low-voltage split-winding transformer is established, and then the 2D and 3D leakage magnetic field are analyzed. Secondly, the short-circuit impedance and split parallel branch current distribution in different working conditions are calculated, which is based on field-circuit coupled method. At last, effectiveness and feasibility of the proposed model is verified by comparison between experiment, analysis and simulation. The results showed that the 3D analysis method is a better approach to calculate the short-circuit impedance, since its analytical value is more closer to the experimental value compared with the 2D analysis results, the finite element method calculation error is less than 2%, while the leakage flux method maximum error is 7.2%.展开更多
This article investigates the near-field dynamics in a particle-laden round turbulent jet in a large-eddy simulation （LES）. A point-force two-way coupling model is adopted in the simulation to reveal the particle mo...This article investigates the near-field dynamics in a particle-laden round turbulent jet in a large-eddy simulation （LES）. A point-force two-way coupling model is adopted in the simulation to reveal the particle modulation of turbulence. The particles mainly excite the initial instability of the jet and bring about the earlier breakup of vortex rings in the near-field. The flow fluc- tuating intensity either in the axial or in the radial directions is hence increased by particles. The article also describes the mean velocity modulated by particles. The changing statistical velocity induced by particle modulation implies the effects of modulation of the local flow structures. This study is expected to be useful to the control of two-phase turbulent jets.展开更多
The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field...The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field-circuit coupling method and equivalent circuit method. The average EFI of the inner surface of the outer semi-conducting shield can be calculated from the current in the measuring circuit. The relative error between these two methods is about 15%, which roughly proves the consistency of the two methods. Further practical application research enables online monitoring of cable joints.展开更多
This paper presents an analytical method for electromagnetic acoustic transducers （EMATs） under voltage excitation and considers the non-uniform distribution of the biased magnetic field. A complete model of EMATs i...This paper presents an analytical method for electromagnetic acoustic transducers （EMATs） under voltage excitation and considers the non-uniform distribution of the biased magnetic field. A complete model of EMATs including the non-uniform biased magnetic field, a pulsed eddy current field and the acoustic field is built up. The pulsed voltage excitation is transformed to the frequency domain by fast Fourier transformation （FFT）. In terms of the time harmonic field equations of the EMAT system, the impedances of the coils under different frequencies are calculated according to the circuit-field coupling method and Poynting＇s theorem. Then the currents under different frequencies are calculated according to Ohm＇s law and the pulsed current excitation is obtained by inverse fast Fourier transformation （IFFT）. Lastly, the sequentially coupled finite element method （FEM） is used to calculate the Lorentz force in the EMATs under the current excitation. An actual EMAT with a two-layer two-bundle printed circuit board （PCB） coil, a rectangular permanent magnet and an aluminium specimen is analysed. The coil impedances and the pulsed current are calculated and compared with the experimental results. Their agreement verified the validity of the proposed method. Furthermore, the influences of lift-off distances and the non-uniform static magnetic field on the Lorentz force under pulsed voltage excitation are studied.展开更多
All-solid-state lithium metal batteries represent leading candidates for the next generation of highenergy-density rechargeable batteries.However,the coupled mechanisms governing dendrite growth and crack propagation ...All-solid-state lithium metal batteries represent leading candidates for the next generation of highenergy-density rechargeable batteries.However,the coupled mechanisms governing dendrite growth and crack propagation within solid-state electrolytes(SSEs)remain inadequately understood.To address this knowledge gap,we propose an electrochemical-mechanical coupled phase-field model designed to simulate the complex processes of lithium deposition and crack propagation in SSEs.This framework systematically examines the influence of initial defect characteristics—including morphology,dimensions,and fracture toughness—on dendrite penetration dynamics.Furthermore,it identifies potential initiation pathways for detrimental lithium deposition within the electrolyte bulk.The model also quantifies the critical role of electrolyte elastic modulus and grain boundary orientation in modulating deposition behavior.Notably,simulation results demonstrate concordance with existing experimental observations,thereby establishing a fundamental theoretical framework for understanding failure mechanisms.This work provides crucial mechanistic insights and predictive capabilities to guide the rational design of failure-resistant SSEs for all-solid-state lithium metal batteries.展开更多
Tofigure out the process and controlling factors of gas reservoir formation in deep-waters,based on an analysis of geological features,source of natural gas and process of reservoir formation in the Liwan 3-1 gasfield...Tofigure out the process and controlling factors of gas reservoir formation in deep-waters,based on an analysis of geological features,source of natural gas and process of reservoir formation in the Liwan 3-1 gasfield,physical simulation experiment of the gas reservoir formation process has been performed,consequently,pattern and features of gas reservoir formation in the Baiyun sag has been found out.The results of the experiment show that:①the formation of the Liwan 3-1 faulted anticline gasfield is closely related to the longstanding active large faults,where natural gas is composed of a high proportion of hydrocarbons,a small amount of non-hydrocarbons,and the wet gas generated during highly mature stage shows obvious vertical migration signs;②liquid hydrocarbons associated with natural gas there are derived from source rock of the Enping&Zhuhai Formation,whereas natural gas comes mainly from source rock of the Enping Formation,and source rock of the Wenchang Formation made a little contribution during the early Eocene period as well;③although there was gas migration and accumulation,yet most of the natural gas mainly scattered and dispersed due to the stronger activity of faults in the early period;later as fault activity gradually weakened,gas started to accumulate into reservoirs in the Baiyun sag;④there is stronger vertical migration of oil and gas than lateral migration,and the places where fault links effective source rocks with reservoirs are most likely for gas accumulation;⑤effective temporal-spatial coupling of source-fault-reservoir in late stage is the key to gas reservoir formation in the Baiyun sag;⑥the nearer the distance from a trap to a large-scale fault and hydrocarbon source kitchen,the more likely gas may accumulate in the trap in late stage,therefore gas accumulation efficiency is much lower for the traps which are far away from large-scale faults and hydrocarbon source kitchens.展开更多
In order to study the temperature distribution of deep field,mathematical mod- els of temperature field in field and surrounding rock were built based on heat transfer and seepage theory.Combined test data with mathem...In order to study the temperature distribution of deep field,mathematical mod- els of temperature field in field and surrounding rock were built based on heat transfer and seepage theory.Combined test data with mathematical model,the temperature distribution under heat-transfer and underground-water coupling was studied by using Golden Soft- ware Surfer and Matlab.The results show that distribution law of most isothermal lines is very similar in deep field,and temperature gradient is equal in general.At the same time, temperature distribution is influenced by underground-water and fault.In surrounding rock, seepage changes symmetrical distribution of temperature field and vector,and the tem- perature field may divide into inward-diffusion area and outward-diffusion area.Peripheral temperature of working will approach to the temperature of airflow.In inward diffusion area the distribution of temperature and temperature vector is symmetric,and the direction of temperature vector point to the center of working.The action of airflow is stronger than seepage in inward diffusion area,however,the case opposite is true in outward diffusion area.展开更多
This study focuses on the distribution of high-resistance media(pores and spinels)within ZnO varistors and explores the mechanical and electrical failure mechanisms of varistors under different pulse actions.Micro-CT ...This study focuses on the distribution of high-resistance media(pores and spinels)within ZnO varistors and explores the mechanical and electrical failure mechanisms of varistors under different pulse actions.Micro-CT technology revealed that the proportion of high-resistance media in the edge area is much higher than in the internal area.Simulation results indicated that a high porosity significantly increased temperature rise and thermal stress concentration,while a high spinel proportion exacerbated current concentration but had a relatively minor impact on the distribution of temperature rise and thermal stress.Under an electric field of 1000-1250 V/mm,pores transition from an insulating state to a conductive state,especially in the edge area,leading to concentrated temperature rise and thermal stress.Once the thermal stress exceeded the critical value of the mechanical strength of the pores,cracking failure occurred.The high spinel proportion in the edge area further intensified current concentration under high electric fields,working together with the conductivity of the pores to produce a significant local temperature rise,melting grain structure,and ultimately leading to puncture failure.This study provides a new perspective for understanding the failure mechanism of ZnO varistors and lays a theoretical foundation for the development of varistor materials with high energy absorption capacity.展开更多
Discusses the interval between laminations in a permanent magnet inductor motor which makes the air gap magnetic field produced by the permanent magnet very uneven in the axial direction, and limits the performance of...Discusses the interval between laminations in a permanent magnet inductor motor which makes the air gap magnetic field produced by the permanent magnet very uneven in the axial direction, and limits the performance of a motor. Proposes a hybrid magnetic circuit multi couple motor to compensate for the uneven air gap magnetic field, thereby improving the performance of a motor.展开更多
In this paper, the development status of casting numerical simulation technology is introduced. In additional, mathematical model, solution method, initial condition, boundary condition and defect predicting scheme of...In this paper, the development status of casting numerical simulation technology is introduced. In additional, mathematical model, solution method, initial condition, boundary condition and defect predicting scheme of foundry process are also analyzed, which include the mold filling process, solidification process and the process coupling fluid flow with heat transfer. Finally, a practical casting is taken out to show how to predict defects and optimize foundry process with numerical simulation technology.展开更多
Coupled turbulent flow, temperature fields of the twin-roll casting strip process were simulated by three-dimensional finite element method. Based on the heat balance calculation and using inverse methods between the ...Coupled turbulent flow, temperature fields of the twin-roll casting strip process were simulated by three-dimensional finite element method. Based on the heat balance calculation and using inverse methods between the simulations and real experiments, the relational models among casting speed, location, and coefficient of heat transfer between molten metal and rolls in different regions are given. In the simulation, the calculated surface temperatures are in good agreement with the measured values. An on-line model of kiss point is derived by simulations and the geometry of molten pool, corresponding control strategy is also proposed.展开更多
The coupling mechanism in freezing process of seepage ground was studied and a simplified coupling math model was proposed. The nonlinear and coupling problems of PDEs were well solved using the exponential function, ...The coupling mechanism in freezing process of seepage ground was studied and a simplified coupling math model was proposed. The nonlinear and coupling problems of PDEs were well solved using the exponential function, error function and normal distribution function, and a series of FEM equations of coupled fields of temperature and seepage were deduced and put forward. With the example of shaft ground freezing, the formation of freezing wall in seepage ground was simulated.展开更多
An upwind finite element(FE)based algorithm to calculate the ion flow field in the vicinity of multi-circuit DC transmission lines is described.The initial value estimation and boundary condition are optimized,so deta...An upwind finite element(FE)based algorithm to calculate the ion flow field in the vicinity of multi-circuit DC transmission lines is described.The initial value estimation and boundary condition are optimized,so details of the transmission lines such as bundle conductors and ground wires can be taken into account in the simulation model.Comparison between measured and computed ground level total electrical field and ion current density shows satisfactory agreement.The ion flow field of a ±500 kV HVDC project with bipolar lines on the same tower is simulated.The total electrical field and ion current density on ground level are compared among different line arrangements.展开更多
<div style="text-align:justify;"> Rainfall infiltration is a porous medium flow problem with variable saturation. Based on the theoretical analysis of the flow field, electrical conductivity of rocks, ...<div style="text-align:justify;"> Rainfall infiltration is a porous medium flow problem with variable saturation. Based on the theoretical analysis of the flow field, electrical conductivity of rocks, the electrical field, the paper simulates the coupling relationship between the water saturation in soil and the apparent resistivity distribution. It combines the Richards equation, the Archie formula and the Laplace equation. The experiment simulates the potential field data by the Wenner setting in electrical exploration on a two-layer geologic model with continuous rainfall during 5 days, which shows that the effective saturation in soil is increasing with the rainfall time, while the apparent resistivity is decreasing. This can provide a theoretical basis for the analyzing the rainfall infiltration and porosity of the soil by using high-density electrical method in the future. </div>展开更多
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
基金supported by the National Natural Science Foundation of China (Grant No. 11705143)the Open Foundation for Key Laboratories of National Defense Science and Technology of China (Grant No. 6142202031901)the Foundation for Research and Development of Applied Technology in Beilin District of Xi’an,China (Grant No. GX2047)。
文摘We take the established inductively coupled plasma(ICP) wind tunnel as a research object to investigate the thermal protection system of re-entry vehicles. A 1.2-MW high power ICP wind tunnel is studied through numerical simulation and experimental validation. The distribution characteristics and interaction mechanism of the flow field and electromagnetic field of the ICP wind tunnel are investigated using the multi-field coupling method of flow, electromagnetic, chemical, and thermodynamic field. The accuracy of the numerical simulation is validated by comparing the experimental results with the simulation results. Thereafter, the wind tunnel pressure, air velocity, electron density, Joule heating rate, Lorentz force, and electric field intensity obtained using the simulation are analyzed and discussed. The results indicate that for the 1.2-MW ICP wind tunnel, the maximum values of temperature, pressure, electron number density, and other parameters are observed during coil heating. The influence of the radial Lorentz force on the momentum transfer is stronger than that of the axial Lorentz force. The electron number density at the central axis and the amplitude and position of the Joule heating rate are affected by the radial Lorentz force. Moreover, the plasma in the wind tunnel is constantly in the subsonic flow state, and a strong eddy flow is easily generated at the inlet of the wind tunnel.
基金the National High Technical Reasearch and Development Programme of China （No. 2003AA327140） the National Natural Science Foundation of China （No. 50374081）.
文摘Two full 3D steady mathematical models are developed by finite element method （FEM） to calcalate coupled physics fields. the electro-magnetic model is built and solved first and so is the fluid motion model with the acquired electromagnetic force as source body forces in Navier-Stokes equations. Effects caused by the ferromagnetic shell, busbar system around, and open boundary problem as well as inside induced current were considered in terms of the magnetic field. Furthermore, a new modeling method is found to set up solid models and then mesh them entirely with so-called structuralized grids, namely hex-mesh. Examples of 75kA prebaked cell with two kinds of busbar arrangements are presented. Results agree with those disclosed in the literature and confirm that the coupled simulation is valid. It is also concluded that the usage of these models facilitates the consistent analysis of the electric field to magnetic field and then flow motion to the greater extent, local distributions of current density and magnetic flux density are very much dependent on the cell structure, the steel shell is a shield to reduce the magnetic field and flow pattern is two dimensional in the main body of the metal pad.
基金Project supported by the National Natural Science Foundation of China(Grant No.12062009)the Gansu National Science of Foundation,China(Grant No.20JR5RA473)。
文摘When charged bodies come up close to each other,the field energy is diffused and their states are regulated under bidirectional field coupling.For biological neurons,the diversity in intrinsic electric and magnetic field energy can create synaptic connection for fast energy balance and synaptic current is passed across the synapse channel;as a result,energy is pumped and exchanged to induce synchronous firing modes.In this paper,a capacitor is used to connect two neural circuits and energy propagation is activated along the coupling channel.The intrinsic field energy in the two neural circuits is exchanged and the coupling intensity is controlled adaptively using the Heaviside function.Some field energy is saved in the coupling channel and is then sent back to the coupled neural circuits to reach energy balance.Therefore the circuits can reach possible energy balance and complete synchronization.It is possible that the diffusive energy of the coupled neurons inspires the synaptic connections to grow stronger for possible energy balance.
基金supported by National Natural Science Foundation of China (Nos. 11975163 and 12175160)a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘The electron heating characteristics of magnetic enhancement capacitively coupled argon plasmas in presence of both longitudinal and transverse uniform magnetic field have been explored through both theoretical and numerical calculations.It is found that the longitudinal magnetic field can affect the heating by changing the level of the pressure heating along the longitudinal direction and that of the Ohmic heating along the direction which is perpendicular to both driving electric field and the applied transverse magnetic field,and a continuously increased longitudinal magnetic field can induce pressure heating to become dominant.Moreover,the electron temperature as well as proportion of some low energy electrons will increase if a small longitudinal magnetic field is introduced,which is attributed to the increased average electron energy.We believe that the research will provide guidance for optimizing the magnetic field configuration of some discharge systems having both transverse and longitudinal magnetic field.
文摘Magnetohydrodynamic(MHD)induction pumps are contactless pumps able to withstand harsh environments.The rate of fluid flow through the pump directly affects the efficiency and stability of the device.To explore the influence of induction pump settings on the related delivery speed,in this study,a numerical model for coupled electromagnetic and flow field effects is introduced and used to simulate liquid metal lithium flow in the induction pump.The effects of current intensity,frequency,coil turns and coil winding size on the velocity of the working fluid are analyzed.It is shown that the first three parameters have a significant impact,while changes in the coil turns have a negligible influence.The maximum increase in working fluid velocity within the pump for the parameter combination investigated in this paper is approximately 618%.As the frequency is increased from 20 to 60 Hz,the maximum increase in the mean flow rate of the working fluid is approximately 241%.These research findings are intended to support the design and optimization of these devices.
文摘It is difficult to accurately calculate the short-circuit impedance, due to the complexity of axial dual-low-voltage split-winding transformer winding structure. In this paper, firstly, the leakage magnetic field and short-circuit impedance model of axial dual-low-voltage split-winding transformer is established, and then the 2D and 3D leakage magnetic field are analyzed. Secondly, the short-circuit impedance and split parallel branch current distribution in different working conditions are calculated, which is based on field-circuit coupled method. At last, effectiveness and feasibility of the proposed model is verified by comparison between experiment, analysis and simulation. The results showed that the 3D analysis method is a better approach to calculate the short-circuit impedance, since its analytical value is more closer to the experimental value compared with the 2D analysis results, the finite element method calculation error is less than 2%, while the leakage flux method maximum error is 7.2%.
基金National Natural Science Foundation of China (50706021)Ph.D.Programs Foundation of Ministry of Education of China (20070003018)TNList Cross-discipline Foundation
文摘This article investigates the near-field dynamics in a particle-laden round turbulent jet in a large-eddy simulation （LES）. A point-force two-way coupling model is adopted in the simulation to reveal the particle modulation of turbulence. The particles mainly excite the initial instability of the jet and bring about the earlier breakup of vortex rings in the near-field. The flow fluc- tuating intensity either in the axial or in the radial directions is hence increased by particles. The article also describes the mean velocity modulated by particles. The changing statistical velocity induced by particle modulation implies the effects of modulation of the local flow structures. This study is expected to be useful to the control of two-phase turbulent jets.
文摘The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field-circuit coupling method and equivalent circuit method. The average EFI of the inner surface of the outer semi-conducting shield can be calculated from the current in the measuring circuit. The relative error between these two methods is about 15%, which roughly proves the consistency of the two methods. Further practical application research enables online monitoring of cable joints.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10974115)
文摘This paper presents an analytical method for electromagnetic acoustic transducers （EMATs） under voltage excitation and considers the non-uniform distribution of the biased magnetic field. A complete model of EMATs including the non-uniform biased magnetic field, a pulsed eddy current field and the acoustic field is built up. The pulsed voltage excitation is transformed to the frequency domain by fast Fourier transformation （FFT）. In terms of the time harmonic field equations of the EMAT system, the impedances of the coils under different frequencies are calculated according to the circuit-field coupling method and Poynting＇s theorem. Then the currents under different frequencies are calculated according to Ohm＇s law and the pulsed current excitation is obtained by inverse fast Fourier transformation （IFFT）. Lastly, the sequentially coupled finite element method （FEM） is used to calculate the Lorentz force in the EMATs under the current excitation. An actual EMAT with a two-layer two-bundle printed circuit board （PCB） coil, a rectangular permanent magnet and an aluminium specimen is analysed. The coil impedances and the pulsed current are calculated and compared with the experimental results. Their agreement verified the validity of the proposed method. Furthermore, the influences of lift-off distances and the non-uniform static magnetic field on the Lorentz force under pulsed voltage excitation are studied.
基金supported by the National Natural Science Foundation of China(No.52476053,No.22409209)Beijing Natural Science Foundation(No.3242017)。
文摘All-solid-state lithium metal batteries represent leading candidates for the next generation of highenergy-density rechargeable batteries.However,the coupled mechanisms governing dendrite growth and crack propagation within solid-state electrolytes(SSEs)remain inadequately understood.To address this knowledge gap,we propose an electrochemical-mechanical coupled phase-field model designed to simulate the complex processes of lithium deposition and crack propagation in SSEs.This framework systematically examines the influence of initial defect characteristics—including morphology,dimensions,and fracture toughness—on dendrite penetration dynamics.Furthermore,it identifies potential initiation pathways for detrimental lithium deposition within the electrolyte bulk.The model also quantifies the critical role of electrolyte elastic modulus and grain boundary orientation in modulating deposition behavior.Notably,simulation results demonstrate concordance with existing experimental observations,thereby establishing a fundamental theoretical framework for understanding failure mechanisms.This work provides crucial mechanistic insights and predictive capabilities to guide the rational design of failure-resistant SSEs for all-solid-state lithium metal batteries.
基金National High Technology Research and Development Program of China“Fundamental Study on Formation and Distribution of Hydrocarbon Resources in Deep-water Basins,South China Sea”(No.2009CB219400).
文摘Tofigure out the process and controlling factors of gas reservoir formation in deep-waters,based on an analysis of geological features,source of natural gas and process of reservoir formation in the Liwan 3-1 gasfield,physical simulation experiment of the gas reservoir formation process has been performed,consequently,pattern and features of gas reservoir formation in the Baiyun sag has been found out.The results of the experiment show that:①the formation of the Liwan 3-1 faulted anticline gasfield is closely related to the longstanding active large faults,where natural gas is composed of a high proportion of hydrocarbons,a small amount of non-hydrocarbons,and the wet gas generated during highly mature stage shows obvious vertical migration signs;②liquid hydrocarbons associated with natural gas there are derived from source rock of the Enping&Zhuhai Formation,whereas natural gas comes mainly from source rock of the Enping Formation,and source rock of the Wenchang Formation made a little contribution during the early Eocene period as well;③although there was gas migration and accumulation,yet most of the natural gas mainly scattered and dispersed due to the stronger activity of faults in the early period;later as fault activity gradually weakened,gas started to accumulate into reservoirs in the Baiyun sag;④there is stronger vertical migration of oil and gas than lateral migration,and the places where fault links effective source rocks with reservoirs are most likely for gas accumulation;⑤effective temporal-spatial coupling of source-fault-reservoir in late stage is the key to gas reservoir formation in the Baiyun sag;⑥the nearer the distance from a trap to a large-scale fault and hydrocarbon source kitchen,the more likely gas may accumulate in the trap in late stage,therefore gas accumulation efficiency is much lower for the traps which are far away from large-scale faults and hydrocarbon source kitchens.
基金Foundation of Liaoning Educational Committee(2007F049,20060390)
文摘In order to study the temperature distribution of deep field,mathematical mod- els of temperature field in field and surrounding rock were built based on heat transfer and seepage theory.Combined test data with mathematical model,the temperature distribution under heat-transfer and underground-water coupling was studied by using Golden Soft- ware Surfer and Matlab.The results show that distribution law of most isothermal lines is very similar in deep field,and temperature gradient is equal in general.At the same time, temperature distribution is influenced by underground-water and fault.In surrounding rock, seepage changes symmetrical distribution of temperature field and vector,and the tem- perature field may divide into inward-diffusion area and outward-diffusion area.Peripheral temperature of working will approach to the temperature of airflow.In inward diffusion area the distribution of temperature and temperature vector is symmetric,and the direction of temperature vector point to the center of working.The action of airflow is stronger than seepage in inward diffusion area,however,the case opposite is true in outward diffusion area.
基金National Natural Science Foundation of China(Youth Fund Program),Grant/Award Number:52107158Natural Science Foundation of Sichuan Province,Grant/Award Number:2024NSFSC0116Project of‘Gathering Resources to Prosper Sichuan’,Grant/Award Number:25JYXC0046。
文摘This study focuses on the distribution of high-resistance media(pores and spinels)within ZnO varistors and explores the mechanical and electrical failure mechanisms of varistors under different pulse actions.Micro-CT technology revealed that the proportion of high-resistance media in the edge area is much higher than in the internal area.Simulation results indicated that a high porosity significantly increased temperature rise and thermal stress concentration,while a high spinel proportion exacerbated current concentration but had a relatively minor impact on the distribution of temperature rise and thermal stress.Under an electric field of 1000-1250 V/mm,pores transition from an insulating state to a conductive state,especially in the edge area,leading to concentrated temperature rise and thermal stress.Once the thermal stress exceeded the critical value of the mechanical strength of the pores,cracking failure occurred.The high spinel proportion in the edge area further intensified current concentration under high electric fields,working together with the conductivity of the pores to produce a significant local temperature rise,melting grain structure,and ultimately leading to puncture failure.This study provides a new perspective for understanding the failure mechanism of ZnO varistors and lays a theoretical foundation for the development of varistor materials with high energy absorption capacity.
文摘Discusses the interval between laminations in a permanent magnet inductor motor which makes the air gap magnetic field produced by the permanent magnet very uneven in the axial direction, and limits the performance of a motor. Proposes a hybrid magnetic circuit multi couple motor to compensate for the uneven air gap magnetic field, thereby improving the performance of a motor.
文摘In this paper, the development status of casting numerical simulation technology is introduced. In additional, mathematical model, solution method, initial condition, boundary condition and defect predicting scheme of foundry process are also analyzed, which include the mold filling process, solidification process and the process coupling fluid flow with heat transfer. Finally, a practical casting is taken out to show how to predict defects and optimize foundry process with numerical simulation technology.
基金supported by National Key Research Development Planning Project of China (2004CB619108).
文摘Coupled turbulent flow, temperature fields of the twin-roll casting strip process were simulated by three-dimensional finite element method. Based on the heat balance calculation and using inverse methods between the simulations and real experiments, the relational models among casting speed, location, and coefficient of heat transfer between molten metal and rolls in different regions are given. In the simulation, the calculated surface temperatures are in good agreement with the measured values. An on-line model of kiss point is derived by simulations and the geometry of molten pool, corresponding control strategy is also proposed.
文摘The coupling mechanism in freezing process of seepage ground was studied and a simplified coupling math model was proposed. The nonlinear and coupling problems of PDEs were well solved using the exponential function, error function and normal distribution function, and a series of FEM equations of coupled fields of temperature and seepage were deduced and put forward. With the example of shaft ground freezing, the formation of freezing wall in seepage ground was simulated.
基金Project Supported by China11th Five-year National Key Technologies R&D Program(2006BAA02A20)
文摘An upwind finite element(FE)based algorithm to calculate the ion flow field in the vicinity of multi-circuit DC transmission lines is described.The initial value estimation and boundary condition are optimized,so details of the transmission lines such as bundle conductors and ground wires can be taken into account in the simulation model.Comparison between measured and computed ground level total electrical field and ion current density shows satisfactory agreement.The ion flow field of a ±500 kV HVDC project with bipolar lines on the same tower is simulated.The total electrical field and ion current density on ground level are compared among different line arrangements.
文摘<div style="text-align:justify;"> Rainfall infiltration is a porous medium flow problem with variable saturation. Based on the theoretical analysis of the flow field, electrical conductivity of rocks, the electrical field, the paper simulates the coupling relationship between the water saturation in soil and the apparent resistivity distribution. It combines the Richards equation, the Archie formula and the Laplace equation. The experiment simulates the potential field data by the Wenner setting in electrical exploration on a two-layer geologic model with continuous rainfall during 5 days, which shows that the effective saturation in soil is increasing with the rainfall time, while the apparent resistivity is decreasing. This can provide a theoretical basis for the analyzing the rainfall infiltration and porosity of the soil by using high-density electrical method in the future. </div>
