The simulation of the ground effect has always been a technical difficulty in wind tunnel tests of high-speed trains.In this paper,large eddy simulation and the curl acoustic integral equation were used to simulate th...The simulation of the ground effect has always been a technical difficulty in wind tunnel tests of high-speed trains.In this paper,large eddy simulation and the curl acoustic integral equation were used to simulate the flow-acoustic field results of high-speed trains under four ground simulation systems(GSSs):“moving ground+rotating wheel”,“stationary ground+rotating wheel”,“moving ground+stationary wheel”,and“stationary ground+stationary wheel”.By comparing the fluid-acoustic field results of the four GSSs,the influence laws of different GSSs on the flow field structure,aero-acoustic source,and far-field radiation noise characteristics were investigated,providing guidance for the acoustic wind tunnel testing of high-speed trains.The calculation results of the aerodynamic noise of a 350 km/h high-speed train show that the moving ground and rotating wheel affect mainly the aero-acoustic performance under the train bottom.The influence of the rotating wheel on the equivalent sound source power of the whole vehicle was not more than 5%,but that of the moving ground slip was more than 15%.The average influence of the rotating wheel on the sound pressure level radiated by the whole vehicle was 0.3 dBA,while that of the moving ground was 1.8 dBA.展开更多
This study investigates the modulation of initial wind field structure on the relationship between the size and intensity of a simulated vortex.A series of idealized experiments are conducted by varying the radius of ...This study investigates the modulation of initial wind field structure on the relationship between the size and intensity of a simulated vortex.A series of idealized experiments are conducted by varying the radius of maximum wind(RMW)and shape parameter of the initial vortices.The size–intensity relationship is quantified by the linear regression coefficient of the azimuthally-averaged gale-force wind radius against the maximum wind during the development stage,reflecting the degree of size expansion at the same intensity increment.The regression coefficient increases with increased RMW and decreased,with the RMW being the primary constraint.The effect of lowering on the elevation of the regression coefficient gradually stands out when the initial RMW is large.Enlarging the RMW leads to a secondary circulation with a horizontally elongated structure,which retards the intensification while promoting size expansion,thus substantially enhancing size expansion as the vortex intensifies.Broadening the wind field outside the RMW by reducing results in abounding convection in the outer region,which promotes size expansion.Based on the axisymmetric tangential wind tendency and Sawyer–Eliassen equations,when the RMW is large,the active convection in the outer region can weaken the radial inflow induced by the eyewall heating in the inner region,thus retarding the intensification by reducing the radial imports of vorticity near the RMW.展开更多
In this paper,a specially designed Pancharatnam–Berry(PB)phase is used to fuse two-dimensional Airy-like beams to adjust and construct a new nano-interferometric field structure.The calculation results show that this...In this paper,a specially designed Pancharatnam–Berry(PB)phase is used to fuse two-dimensional Airy-like beams to adjust and construct a new nano-interferometric field structure.The calculation results show that this nano-interferometric structure is highly dependent on the PB phase parameterγand the ratio of pupil radius to beam waistβ.The flexible setting of the nano-field with adjustable size,spacing and internal details can be realized.In addition,we found that the longitudinal field components always keep a clear pattern.Hence,it is expected that the longitudinal field components can be applied to each application scene separately.展开更多
In this study,we present a physical model to explain the generation mechanism of nonlinear periodic waveswith a large amplitude electric field structures propagating obliquely and exactly parallel to the magnetic fiel...In this study,we present a physical model to explain the generation mechanism of nonlinear periodic waveswith a large amplitude electric field structures propagating obliquely and exactly parallel to the magnetic field.The'Sagdeev potential' from the MHD equations is derived and the nonlinear electric field waveforms are obtained when theMach number,direction of propagation,and the initial electric field satisfy certain plasma conditions.For the parallelpropagation,the amplitude of the electric field waves with ion-acoustic mode increases with the increase of initial electricfield and Mach number but its frequency decreases with the increase of Mach number.The amplitude and frequency ofthe electric field waves with ion-cyclotron mode decrease with the increase of Mach number and become less spiky,andits amplitude increases with the increase of initial electric field.For the oblique propagation,only periodic electric fieldwave with an ion-cyclotron mode obtained,its amplitude and frequency increase with the increase of Mach number andbecome spiky.From our model the electric field structures show periodic,spiky,and saw-tooth behaviours correspondingto different plasma conditions.展开更多
Surface/underwater target classification is a key topic in marine information research.However,the complex underwater environment,coupled with the diversity of target types and their variable characteristics,presents ...Surface/underwater target classification is a key topic in marine information research.However,the complex underwater environment,coupled with the diversity of target types and their variable characteristics,presents significant challenges for classifier design.For shallow-water waveguides with a negative thermocline,a residual neural network(ResNet)model based on the sound field elevation structure is constructed.This model demonstrates robust classification performance even when facing low signal-to-noise ratios and environmental mismatches.Meanwhile,to address the reduced generalization ability caused by limited labeled acoustic data,an improved ResNet model based on unsupervised domain adaptation(“proposed UDA-ResNet”)is further constructed.This model incorporates data on simulated elevation structures of the sound field to augment the training process.Adversarial training is employed to extract domain-invariant features from simulated and trial data.These strategies help reduce the negative impact caused by domain differences.Experimental results demonstrate that the proposed method shows strong surface/underwater target classification ability under limited sample sizes,thus confirming its feasibility and effectiveness.展开更多
A downburst is a strong downdraft generated by intense thunderstorm clouds,producing radially divergent and highly destructive winds near the ground.Its characteristic scales are expressed through random variations in...A downburst is a strong downdraft generated by intense thunderstorm clouds,producing radially divergent and highly destructive winds near the ground.Its characteristic scales are expressed through random variations in jet height,velocity,and diameter during an event.In this study,a reduced-scale parked wind turbine is exposed to downburst wind fields to investigate the resulting extreme wind loads.The analysis emphasizes both the flow structure of downbursts and the variations of surface wind pressure on turbine blades under different jet parameters.Results show that increasing jet velocity markedly enhances the maximum horizontal wind speed,while greater jet height reduces the horizontal wind speed and shifts the peak velocity closer to the jet center.Increasing jet diameter primarily affects the radial position of the maximum horizontal wind speed.For the wind turbine,the maximum equivalent stress and blade displacement increase almost linearly with jet velocity,but exhibit the opposite trend with jet diameter.Specifically,as jet velocity rises from 10 m/s to 20 m/s,the surface pressure coefficient at the blade tip increases by approximately 4.5 times.Changes in jet diameter indirectly alter the turbine’s relative position within the wind field,leading to variations in wind load direction and exposure area.Conversely,increasing jet height extends the dissipation path of the downdraft,thereby reducing the intensity of the airflow acting on the blades.For example,when jet height increases from 0.3 m to 1.2 m,the surface pressure coefficient at the blade tip decreases by nearly 50%.展开更多
As the only controllable means of a micro gas turbine(MGT)combustor during unit operation,pilot fuel ratio(PFR)is the key to achieving stable combustion and low pollutant emission.This paper discusses the influence of...As the only controllable means of a micro gas turbine(MGT)combustor during unit operation,pilot fuel ratio(PFR)is the key to achieving stable combustion and low pollutant emission.This paper discusses the influence of PFR on the inner flow field structure and pollutant emissions.The steady-state three-dimensional RANS method with a 40-step reduced methane-air kinetics mechanism is used to study the reaction flow field and species field with PFR of 9.0%,12.7%,15.2%and 17.6%.Results show that,with the decrease in PFR,the axial velocity and temperature near the central axis of the combustion chamber show a tendency to decrease.A similar separation phenomenon occurred in the core pyrolysis reaction zone(measured by HCO)and oxidation zone(measured by OH),which is more conducive to promoting the oxidation of CO.The quantitative effect of the pilot flame on nitrogen oxides(NO_(x))was separated by using inert gas instead of nitrogen in combustion air.It was found that the NOx produced by the pilot flame under the operation condition with a PFR of 9.0%was 3.2×10^(−6),accounting for 17.4%of the total NOx emission,which was twice that of PFR.展开更多
The improved delayed detached eddy simulation method with shear stress transport model was used to analyze the evolution of vortex structure,velocity and pressure fields of swirling jet.The influence of nozzle pressur...The improved delayed detached eddy simulation method with shear stress transport model was used to analyze the evolution of vortex structure,velocity and pressure fields of swirling jet.The influence of nozzle pressure drop on vortex structure development and turbulence pulsation was investigated.The development of vortex structure could be divided into three stages:Kelvin-Helmholtz(K-H)instability,transition stage and swirling flow instability.Swirling flow could significantly enhance radial turbulence pulsation and increase diffusion angle.At the downstream of the jet flow,turbulence pulsation dissipation was the main reason for jet velocity attenuation.With the increase of pressure drop,the jet velocity,pulsation amplitude and the symmetry of velocity distribution increased correspondingly.Meanwhile the pressure pulsation along with the axis and vortex transport intensity also increased significantly.When the jet distance exceeded about 9 times the dimensionless jet distance,the impact distance of swirling jet could not be improved effectively by increasing the pressure drop.However,it could effectively increase the swirl intensity and jet diffusion angle.The swirling jet is more suitable for radial horizontal drilling with large hole size,coalbed methane horizontal well cavity completion and roadway drilling and pressure relief,etc.展开更多
The Shangzhuang altered-rock type gold ore deposit is located in the middle segment of and controlled by the Wang＇ershan fault zone in the northwestern part of the Jiaodong gold province, China. The deformation evolu...The Shangzhuang altered-rock type gold ore deposit is located in the middle segment of and controlled by the Wang＇ershan fault zone in the northwestern part of the Jiaodong gold province, China. The deformation evolution, the structure of strain and stress fields and its ore-controlling effect in the Shangzhuang deposit are discussed in this paper. It is revealed that the deformation evolution has mainly undergone four phases： the early ductile deformation, the second NE-striking horizontal simple shear, the third NE-striking compression-shear and the final NW-striking compression. The mineralization happened during the third stage in which the maximum principal stress gradually transited from NE to NW. The 3-D numerical simulations of the stress field show that, on the condition that the maximum principal stress is NE-striking, the fracture development in the fault zone is favored, while when the maximum principal stress is NW-striking, the fault zone is relatively extensional and it is suitable for the influx and emplacement of ore-forming fluids. The compression-shear strain field during the mineralization is characterized by the λ-type structure, the positive flower structure, etc. Orebodies are mostly equidistantly located in the dilatational spaces, which are distributed in the integral compressional circumstances. And the dilatational spaces are developed where the fault attitude changes or shear joint systems develop. In the overall compression-shear stress field, the strain field bears self-similarity at multiple scales, including the orebody, ore deposit and orefield. The selfsimilarity of the structure comprises the subequidistant distribution of fractures at the same scale and the similar shape of the fractures at various scales. Yet, due to the special geological structure, the orebodies are mostly located in the hanging wall in the Shangzhuang deposit, which is different from most deposits in the Jiaodong gold province. Analyses of the ore-controlling stress and strain fields in the deposit provide an important basis for deposit seeking.展开更多
To investigate the differences and the development trends of the 400 kA aluminum reduction cell, four representative cells were deeply analyzed. By using numerical simulation methods in ANSYS software, the structure p...To investigate the differences and the development trends of the 400 kA aluminum reduction cell, four representative cells were deeply analyzed. By using numerical simulation methods in ANSYS software, the structure parameters were firstly compared, and then three-dimensional models of electric-magnetic-flow field were built and solved with finite element method(FEM). The comparison of the structures reveals that the cell bodies are similar while the current flow path and distribution ratio of bus bars are different. It appears that most of the current(70%-80%) in side A are used as the magnetic field compensation current and flow through two ends. The numerical simulation results indicate that the distributions of magnetic fields are different but all satisfy with the magnetohydrodynamics(MHD) stabilization, and the flow patterns are all two or multi vortexes with appropriate velocities. The comparison shows that all studied cells can satisfy with the physical field requirement, and the commercial applications also verify that the 400 kA cells have become the product of the mature and world's leading technology.展开更多
The anomalous dimensions of the quantum fields are the Hausdorff dimensiongrad. The present candidate of the renormalization constant is the generalized Cantor discontinuum. The Hausdorff dimensiongrad of the Minkowsk...The anomalous dimensions of the quantum fields are the Hausdorff dimensiongrad. The present candidate of the renormalization constant is the generalized Cantor discontinuum. The Hausdorff dimensiongrad of the Minkowski space time is based upon the point set with σ-length on light cone.展开更多
We consider an entangled Ising-XY Z diamond chain structure. Quantum correlations for this model are inves- tigated by using quantum discord and trace distance discord. Quantum correlations are obtained for different ...We consider an entangled Ising-XY Z diamond chain structure. Quantum correlations for this model are inves- tigated by using quantum discord and trace distance discord. Quantum correlations are obtained for different values of the anisotropy parameter, magnetic field and temperature. By comparison between quantum correlations, we show that the trace distance discord is always larger than quantum discord. Finally, some novel effects such as increasing the quantum correlations with temperature and constructive role of anisotropy parameter, which may play to the quantum correlations, are observed.展开更多
The Toroidal Field (TF) coil case of the HT-7U superconducting tokamak device is made of austenitic stainless steel 316LN and is designed to operate at cryogenic temperature (4 K). 316LN can retain high strength and f...The Toroidal Field (TF) coil case of the HT-7U superconducting tokamak device is made of austenitic stainless steel 316LN and is designed to operate at cryogenic temperature (4 K). 316LN can retain high strength and fracture toughness at 4 K. Feasibility study on technical process of welding has been experimentally considered as a hopeful joint method for suppression of post-welding deformation and reduction of over-heating. Meanwhile the final range of stress intensity and the stress intensity factor (K) for pre-cracks of welding structure have been determined by using J-integral. These related results are optimistic and have shown that there's no problem in strength and fracture toughness at the vicinity of the pre-crack tip. This paper introduces the welding structure of TF coil case in detail.展开更多
The solar temperature field of a large three-span continuous bridge with steel-concrete composite box girder and variable cross-section is measured to verify a calculation method for the temperature field of steel-con...The solar temperature field of a large three-span continuous bridge with steel-concrete composite box girder and variable cross-section is measured to verify a calculation method for the temperature field of steel-concrete composite beams. The test results show that the temperature of an external steel web- plate is higher than that of an internal web-plate due to the difference in solar radiation. Air temperature inside the box matches the average temperature of the whole steel box. Based on actual measurements, a transient thermal analysis with multiple boundary conditions is also carried out by a software program ANSYS. Convective boundary situation and states of solar radiation on steel web plates in different situations are determined in the analysis. The feature of the temperature field is preliminarily achieved through a comparative study between the actual measurement and the finite element analysis. The computed results are in good consistence with the actual measurement results, with the maximum difference within 2 ℃. This indicates that the theoretical calculation method is reliable and it provides a foundation for further research on temperature field distribution in the steel-concrete composite box girder.展开更多
Gaseous detonation propagating in a toroidal chamber was numerically studied for hydrogen/oxygen/nitrogen mixtures. The numerical method used is based on the three-dimensional Euler equations with detailed finiterate ...Gaseous detonation propagating in a toroidal chamber was numerically studied for hydrogen/oxygen/nitrogen mixtures. The numerical method used is based on the three-dimensional Euler equations with detailed finiterate chemistry. The results show that the calculated streak picture is in qualitative agreement with the picture recorded by a high speed streak camera from published literature. The three-dimensional flow field induced by a continuously rotating detonation was visualized and distinctive features of the rotating detonations were clearly depicted. Owing to the unconfined character of detonation wavelet, a deficit of detonation parameters was observed. Due to the effects of wall geometries, the strength of the outside detonation front is stronger than that of the inside portion. The detonation thus propagates with a constant circular velocity. Numerical simulation also shows three-dimensional rotating detonation structures, which display specific feature of the detonation- shock combined wave. Discrete burning gas pockets are formed due to instability of the discontinuity. It is believed that the present study could give an insight into the interest- ing properties of the continuously rotating detonation, and is thus beneficial to the design of continuous detonation propulsion systems.展开更多
The integration of electric field enhancement structures(EFESs)with Rydberg atomic sensors(RASs)has garnered considerable interest due to their potential to enhance detection sensitivity in quantum measurement systems...The integration of electric field enhancement structures(EFESs)with Rydberg atomic sensors(RASs)has garnered considerable interest due to their potential to enhance detection sensitivity in quantum measurement systems.Despite this,there is a dearth of research on the directional response of EFES,and the analysis of the three-dimensional(3D)patterns of RAS remains a formidable challenge.RASs are employed in non-destructive measurement techniques,and are responsive to electric fields,primarily serving as reception devices.However,analyzing their reception patterns is a complex task that requires a sophisticated approach.To address this,we adopt characteristic mode(CM)analysis to illustrate the omnidirectional performance of RAS.According to the CM theory,the reception pattern can be calculated by a series of modal currents and their corresponding coefficients.The analytical representation of these coeficients negates the need for time-consuming full-wave(FW)numerical simulations,which are typically required to generate EFES patterns due to the necessity of scanning numerous angle parameters.This approach significantly reduces the complexity of solving EFES patterns,and provides insightful guidance for the design process.To validate the efficacy of our proposed method,we construct three prototypes.The results indicate that the final model resonates at 1.96 GHz,achieving an electric field gain of 25 dB and an out-of-roundness of 2.4 dB.These findings underscore the effectiveness of our method in analyzing EFES patterns,highlighting its potential for future applications in the field.展开更多
Conventional methods for near-field characterization have typically relied on the nanoprobe to point-scan the field,rendering the measurements vulnerable to external environmental influences.Here,we study the direct f...Conventional methods for near-field characterization have typically relied on the nanoprobe to point-scan the field,rendering the measurements vulnerable to external environmental influences.Here,we study the direct far-field imaging of the near-field polarizations based on the four-wave mixing effect.We construct a simulation model to realize the instantaneous extraction of the near-field distributions of a wide range of structured light fields,such as cylindrical vector vortex beams,plasmonic Weber beams,and topological spin textures,including photonic skyrmions and merons.This method is valuable for the studies on manipulation of structured light fields and light-matter interaction at the micro/nano scales.展开更多
We compute the wake of a two-dimensional and three-dimensional flexible fin in an unsteady flow field with heaving and pitching motions using FLUENT. Deflexion mode is used for a non-uniform cantilever beam with non-u...We compute the wake of a two-dimensional and three-dimensional flexible fin in an unsteady flow field with heaving and pitching motions using FLUENT. Deflexion mode is used for a non-uniform cantilever beam with non-uniformly distributed load. The effect of chordwise deflexion length on the characteristics of propulsion is discussed for two-dimensional flexible fin. The thrust coefficient decreases, propulsive efficiency increases and the intensity of turbulence attenuates gradually as the deflexion length increases. For a three-dimensional flexible fin, the intensity of the vortex in the plane of symmetry is higher than that in the plane at 3/4 span length of the caudal fin. But the propulsive perform.ance achieved is not what we expected with the given deflexion mode.展开更多
A fluid–structure interaction method combining a nonlinear finite element algorithm with a preconditioning finite volume method is proposed in this paper to simulate parachute transient dynamics. This method uses a t...A fluid–structure interaction method combining a nonlinear finite element algorithm with a preconditioning finite volume method is proposed in this paper to simulate parachute transient dynamics. This method uses a three-dimensional membrane–cable fabric model to represent a parachute system at a highly folded configuration. The large shape change during parachute inflation is computed by the nonlinear Newton–Raphson iteration and the linear system equation is solved by the generalized minimal residual（GMRES） method. A membrane wrinkling algorithm is also utilized to evaluate the special uniaxial tension state of membrane elements on the parachute canopy. In order to avoid large time expenses during structural nonlinear iteration, the implicit Hilber–Hughes–Taylor（HHT） time integration method is employed. For the fluid dynamic simulations, the Roe and HLLC（Harten–Lax–van Leer contact） scheme has been modified and extended to compute flow problems at all speeds. The lower–upper symmetric Gauss–Seidel（LUSGS） approximate factorization is applied to accelerate the numerical convergence speed. Finally,the test model of a highly folded C-9 parachute is simulated at a prescribed speed and the results show similar characteristics compared with experimental results and previous literature.展开更多
Comprehensive studies on the crustal structures, the anomalies of geophysical field and the seismicity in Central-South Shanxi are conducted. The research results show that there are deep tectonic background for occu...Comprehensive studies on the crustal structures, the anomalies of geophysical field and the seismicity in Central-South Shanxi are conducted. The research results show that there are deep tectonic background for occurring moderate earthquakes in Lingshi-Jiexiu region between Linfen and Taiyuan. From now on, the region should be attached closely.展开更多
基金This work is supported by the National Natural Science Foundation of China(No.52272363)the Foundation of the Key Laboratory of Aerodynamic Noise Control(No.ANCL20200302),China.
文摘The simulation of the ground effect has always been a technical difficulty in wind tunnel tests of high-speed trains.In this paper,large eddy simulation and the curl acoustic integral equation were used to simulate the flow-acoustic field results of high-speed trains under four ground simulation systems(GSSs):“moving ground+rotating wheel”,“stationary ground+rotating wheel”,“moving ground+stationary wheel”,and“stationary ground+stationary wheel”.By comparing the fluid-acoustic field results of the four GSSs,the influence laws of different GSSs on the flow field structure,aero-acoustic source,and far-field radiation noise characteristics were investigated,providing guidance for the acoustic wind tunnel testing of high-speed trains.The calculation results of the aerodynamic noise of a 350 km/h high-speed train show that the moving ground and rotating wheel affect mainly the aero-acoustic performance under the train bottom.The influence of the rotating wheel on the equivalent sound source power of the whole vehicle was not more than 5%,but that of the moving ground slip was more than 15%.The average influence of the rotating wheel on the sound pressure level radiated by the whole vehicle was 0.3 dBA,while that of the moving ground was 1.8 dBA.
基金This study is supported by the National Natural Science Foundation of China(Grant Nos.42175073 and 41975071).
文摘This study investigates the modulation of initial wind field structure on the relationship between the size and intensity of a simulated vortex.A series of idealized experiments are conducted by varying the radius of maximum wind(RMW)and shape parameter of the initial vortices.The size–intensity relationship is quantified by the linear regression coefficient of the azimuthally-averaged gale-force wind radius against the maximum wind during the development stage,reflecting the degree of size expansion at the same intensity increment.The regression coefficient increases with increased RMW and decreased,with the RMW being the primary constraint.The effect of lowering on the elevation of the regression coefficient gradually stands out when the initial RMW is large.Enlarging the RMW leads to a secondary circulation with a horizontally elongated structure,which retards the intensification while promoting size expansion,thus substantially enhancing size expansion as the vortex intensifies.Broadening the wind field outside the RMW by reducing results in abounding convection in the outer region,which promotes size expansion.Based on the axisymmetric tangential wind tendency and Sawyer–Eliassen equations,when the RMW is large,the active convection in the outer region can weaken the radial inflow induced by the eyewall heating in the inner region,thus retarding the intensification by reducing the radial imports of vorticity near the RMW.
文摘In this paper,a specially designed Pancharatnam–Berry(PB)phase is used to fuse two-dimensional Airy-like beams to adjust and construct a new nano-interferometric field structure.The calculation results show that this nano-interferometric structure is highly dependent on the PB phase parameterγand the ratio of pupil radius to beam waistβ.The flexible setting of the nano-field with adjustable size,spacing and internal details can be realized.In addition,we found that the longitudinal field components always keep a clear pattern.Hence,it is expected that the longitudinal field components can be applied to each application scene separately.
基金Supported by National Natural Science Foundation of China under Grant Nos.40674091 and 40621003the Specialized Research Fund for State Key Laboratories
文摘In this study,we present a physical model to explain the generation mechanism of nonlinear periodic waveswith a large amplitude electric field structures propagating obliquely and exactly parallel to the magnetic field.The'Sagdeev potential' from the MHD equations is derived and the nonlinear electric field waveforms are obtained when theMach number,direction of propagation,and the initial electric field satisfy certain plasma conditions.For the parallelpropagation,the amplitude of the electric field waves with ion-acoustic mode increases with the increase of initial electricfield and Mach number but its frequency decreases with the increase of Mach number.The amplitude and frequency ofthe electric field waves with ion-cyclotron mode decrease with the increase of Mach number and become less spiky,andits amplitude increases with the increase of initial electric field.For the oblique propagation,only periodic electric fieldwave with an ion-cyclotron mode obtained,its amplitude and frequency increase with the increase of Mach number andbecome spiky.From our model the electric field structures show periodic,spiky,and saw-tooth behaviours correspondingto different plasma conditions.
基金supported by the National Natural Science Foundation of China(Grant Nos.62471024 and 62301183)the Open Research Fund of Hanjiang Laboratory(KF2024001).
文摘Surface/underwater target classification is a key topic in marine information research.However,the complex underwater environment,coupled with the diversity of target types and their variable characteristics,presents significant challenges for classifier design.For shallow-water waveguides with a negative thermocline,a residual neural network(ResNet)model based on the sound field elevation structure is constructed.This model demonstrates robust classification performance even when facing low signal-to-noise ratios and environmental mismatches.Meanwhile,to address the reduced generalization ability caused by limited labeled acoustic data,an improved ResNet model based on unsupervised domain adaptation(“proposed UDA-ResNet”)is further constructed.This model incorporates data on simulated elevation structures of the sound field to augment the training process.Adversarial training is employed to extract domain-invariant features from simulated and trial data.These strategies help reduce the negative impact caused by domain differences.Experimental results demonstrate that the proposed method shows strong surface/underwater target classification ability under limited sample sizes,thus confirming its feasibility and effectiveness.
基金the National Natural Science Foundation of China(Grant Nos.52276197, 52166014)Gansu Province Key Research and Development Program—Industrial Project(Grant No.23YFGA0069).
文摘A downburst is a strong downdraft generated by intense thunderstorm clouds,producing radially divergent and highly destructive winds near the ground.Its characteristic scales are expressed through random variations in jet height,velocity,and diameter during an event.In this study,a reduced-scale parked wind turbine is exposed to downburst wind fields to investigate the resulting extreme wind loads.The analysis emphasizes both the flow structure of downbursts and the variations of surface wind pressure on turbine blades under different jet parameters.Results show that increasing jet velocity markedly enhances the maximum horizontal wind speed,while greater jet height reduces the horizontal wind speed and shifts the peak velocity closer to the jet center.Increasing jet diameter primarily affects the radial position of the maximum horizontal wind speed.For the wind turbine,the maximum equivalent stress and blade displacement increase almost linearly with jet velocity,but exhibit the opposite trend with jet diameter.Specifically,as jet velocity rises from 10 m/s to 20 m/s,the surface pressure coefficient at the blade tip increases by approximately 4.5 times.Changes in jet diameter indirectly alter the turbine’s relative position within the wind field,leading to variations in wind load direction and exposure area.Conversely,increasing jet height extends the dissipation path of the downdraft,thereby reducing the intensity of the airflow acting on the blades.For example,when jet height increases from 0.3 m to 1.2 m,the surface pressure coefficient at the blade tip decreases by nearly 50%.
基金supported by the Science and Technology Commission of Shanghai Municipality(20dz1204902).
文摘As the only controllable means of a micro gas turbine(MGT)combustor during unit operation,pilot fuel ratio(PFR)is the key to achieving stable combustion and low pollutant emission.This paper discusses the influence of PFR on the inner flow field structure and pollutant emissions.The steady-state three-dimensional RANS method with a 40-step reduced methane-air kinetics mechanism is used to study the reaction flow field and species field with PFR of 9.0%,12.7%,15.2%and 17.6%.Results show that,with the decrease in PFR,the axial velocity and temperature near the central axis of the combustion chamber show a tendency to decrease.A similar separation phenomenon occurred in the core pyrolysis reaction zone(measured by HCO)and oxidation zone(measured by OH),which is more conducive to promoting the oxidation of CO.The quantitative effect of the pilot flame on nitrogen oxides(NO_(x))was separated by using inert gas instead of nitrogen in combustion air.It was found that the NOx produced by the pilot flame under the operation condition with a PFR of 9.0%was 3.2×10^(−6),accounting for 17.4%of the total NOx emission,which was twice that of PFR.
基金Supported by the Beijing Natural Science Foundation Project(3222039)National Natural Science Foundation of China(51827804).
文摘The improved delayed detached eddy simulation method with shear stress transport model was used to analyze the evolution of vortex structure,velocity and pressure fields of swirling jet.The influence of nozzle pressure drop on vortex structure development and turbulence pulsation was investigated.The development of vortex structure could be divided into three stages:Kelvin-Helmholtz(K-H)instability,transition stage and swirling flow instability.Swirling flow could significantly enhance radial turbulence pulsation and increase diffusion angle.At the downstream of the jet flow,turbulence pulsation dissipation was the main reason for jet velocity attenuation.With the increase of pressure drop,the jet velocity,pulsation amplitude and the symmetry of velocity distribution increased correspondingly.Meanwhile the pressure pulsation along with the axis and vortex transport intensity also increased significantly.When the jet distance exceeded about 9 times the dimensionless jet distance,the impact distance of swirling jet could not be improved effectively by increasing the pressure drop.However,it could effectively increase the swirl intensity and jet diffusion angle.The swirling jet is more suitable for radial horizontal drilling with large hole size,coalbed methane horizontal well cavity completion and roadway drilling and pressure relief,etc.
基金This paper is supported by the National Natural Science Foundation of China （Grant Nos. 40572063 and 40272051）；the Fostering Plan Fund for Trans-Century Excellent Talents and the Project 111 （No. B07011）.
文摘The Shangzhuang altered-rock type gold ore deposit is located in the middle segment of and controlled by the Wang＇ershan fault zone in the northwestern part of the Jiaodong gold province, China. The deformation evolution, the structure of strain and stress fields and its ore-controlling effect in the Shangzhuang deposit are discussed in this paper. It is revealed that the deformation evolution has mainly undergone four phases： the early ductile deformation, the second NE-striking horizontal simple shear, the third NE-striking compression-shear and the final NW-striking compression. The mineralization happened during the third stage in which the maximum principal stress gradually transited from NE to NW. The 3-D numerical simulations of the stress field show that, on the condition that the maximum principal stress is NE-striking, the fracture development in the fault zone is favored, while when the maximum principal stress is NW-striking, the fault zone is relatively extensional and it is suitable for the influx and emplacement of ore-forming fluids. The compression-shear strain field during the mineralization is characterized by the λ-type structure, the positive flower structure, etc. Orebodies are mostly equidistantly located in the dilatational spaces, which are distributed in the integral compressional circumstances. And the dilatational spaces are developed where the fault attitude changes or shear joint systems develop. In the overall compression-shear stress field, the strain field bears self-similarity at multiple scales, including the orebody, ore deposit and orefield. The selfsimilarity of the structure comprises the subequidistant distribution of fractures at the same scale and the similar shape of the fractures at various scales. Yet, due to the special geological structure, the orebodies are mostly located in the hanging wall in the Shangzhuang deposit, which is different from most deposits in the Jiaodong gold province. Analyses of the ore-controlling stress and strain fields in the deposit provide an important basis for deposit seeking.
基金Projects(51104187,51274241,61321003) supported by the National Natural Science Foundation of ChinaProject(20100162120008) supported by Doctoral Fund of Ministry of Education of China
文摘To investigate the differences and the development trends of the 400 kA aluminum reduction cell, four representative cells were deeply analyzed. By using numerical simulation methods in ANSYS software, the structure parameters were firstly compared, and then three-dimensional models of electric-magnetic-flow field were built and solved with finite element method(FEM). The comparison of the structures reveals that the cell bodies are similar while the current flow path and distribution ratio of bus bars are different. It appears that most of the current(70%-80%) in side A are used as the magnetic field compensation current and flow through two ends. The numerical simulation results indicate that the distributions of magnetic fields are different but all satisfy with the magnetohydrodynamics(MHD) stabilization, and the flow patterns are all two or multi vortexes with appropriate velocities. The comparison shows that all studied cells can satisfy with the physical field requirement, and the commercial applications also verify that the 400 kA cells have become the product of the mature and world's leading technology.
文摘The anomalous dimensions of the quantum fields are the Hausdorff dimensiongrad. The present candidate of the renormalization constant is the generalized Cantor discontinuum. The Hausdorff dimensiongrad of the Minkowski space time is based upon the point set with σ-length on light cone.
基金Supported by the Azerbaijan Shahid Madani University
文摘We consider an entangled Ising-XY Z diamond chain structure. Quantum correlations for this model are inves- tigated by using quantum discord and trace distance discord. Quantum correlations are obtained for different values of the anisotropy parameter, magnetic field and temperature. By comparison between quantum correlations, we show that the trace distance discord is always larger than quantum discord. Finally, some novel effects such as increasing the quantum correlations with temperature and constructive role of anisotropy parameter, which may play to the quantum correlations, are observed.
文摘The Toroidal Field (TF) coil case of the HT-7U superconducting tokamak device is made of austenitic stainless steel 316LN and is designed to operate at cryogenic temperature (4 K). 316LN can retain high strength and fracture toughness at 4 K. Feasibility study on technical process of welding has been experimentally considered as a hopeful joint method for suppression of post-welding deformation and reduction of over-heating. Meanwhile the final range of stress intensity and the stress intensity factor (K) for pre-cracks of welding structure have been determined by using J-integral. These related results are optimistic and have shown that there's no problem in strength and fracture toughness at the vicinity of the pre-crack tip. This paper introduces the welding structure of TF coil case in detail.
文摘The solar temperature field of a large three-span continuous bridge with steel-concrete composite box girder and variable cross-section is measured to verify a calculation method for the temperature field of steel-concrete composite beams. The test results show that the temperature of an external steel web- plate is higher than that of an internal web-plate due to the difference in solar radiation. Air temperature inside the box matches the average temperature of the whole steel box. Based on actual measurements, a transient thermal analysis with multiple boundary conditions is also carried out by a software program ANSYS. Convective boundary situation and states of solar radiation on steel web plates in different situations are determined in the analysis. The feature of the temperature field is preliminarily achieved through a comparative study between the actual measurement and the finite element analysis. The computed results are in good consistence with the actual measurement results, with the maximum difference within 2 ℃. This indicates that the theoretical calculation method is reliable and it provides a foundation for further research on temperature field distribution in the steel-concrete composite box girder.
基金supported by the National Natural Science Foundation of China (10872096)the Open Fund of State Key Laboratory of Explosion Science and Technology, Beijing University of Science and Technology (KFJJ09-13)
文摘Gaseous detonation propagating in a toroidal chamber was numerically studied for hydrogen/oxygen/nitrogen mixtures. The numerical method used is based on the three-dimensional Euler equations with detailed finiterate chemistry. The results show that the calculated streak picture is in qualitative agreement with the picture recorded by a high speed streak camera from published literature. The three-dimensional flow field induced by a continuously rotating detonation was visualized and distinctive features of the rotating detonations were clearly depicted. Owing to the unconfined character of detonation wavelet, a deficit of detonation parameters was observed. Due to the effects of wall geometries, the strength of the outside detonation front is stronger than that of the inside portion. The detonation thus propagates with a constant circular velocity. Numerical simulation also shows three-dimensional rotating detonation structures, which display specific feature of the detonation- shock combined wave. Discrete burning gas pockets are formed due to instability of the discontinuity. It is believed that the present study could give an insight into the interest- ing properties of the continuously rotating detonation, and is thus beneficial to the design of continuous detonation propulsion systems.
基金Project supported by the National Natural Science Foundation of China(Nos.61901495,62401586,and U24B2009)the Hunan Provincial Natural Science Foundation(No.2022JJ40556)。
文摘The integration of electric field enhancement structures(EFESs)with Rydberg atomic sensors(RASs)has garnered considerable interest due to their potential to enhance detection sensitivity in quantum measurement systems.Despite this,there is a dearth of research on the directional response of EFES,and the analysis of the three-dimensional(3D)patterns of RAS remains a formidable challenge.RASs are employed in non-destructive measurement techniques,and are responsive to electric fields,primarily serving as reception devices.However,analyzing their reception patterns is a complex task that requires a sophisticated approach.To address this,we adopt characteristic mode(CM)analysis to illustrate the omnidirectional performance of RAS.According to the CM theory,the reception pattern can be calculated by a series of modal currents and their corresponding coefficients.The analytical representation of these coeficients negates the need for time-consuming full-wave(FW)numerical simulations,which are typically required to generate EFES patterns due to the necessity of scanning numerous angle parameters.This approach significantly reduces the complexity of solving EFES patterns,and provides insightful guidance for the design process.To validate the efficacy of our proposed method,we construct three prototypes.The results indicate that the final model resonates at 1.96 GHz,achieving an electric field gain of 25 dB and an out-of-roundness of 2.4 dB.These findings underscore the effectiveness of our method in analyzing EFES patterns,highlighting its potential for future applications in the field.
基金supported by the Guangdong Major Project of Basic Research(No.2020B0301030009)the National Natural Science Foundation of China(Nos.62075139,61935013,and 12004260)+4 种基金the Natural Science Foundation of Guangdong(No.2024A1515012503)the Innovation Team Project of Ordinary University of Guangdong Provincial Education Bureau(No.2024KCXTD014)the Shenzhen Science and Technology Program(Nos.RCJC20200714114435063 and JCYJ20241202124532024)the Research Team Cultivation Program of Shenzhen University(No.2023QNT012)the Shenzhen University 2035 Initiative(No.2023B004)。
文摘Conventional methods for near-field characterization have typically relied on the nanoprobe to point-scan the field,rendering the measurements vulnerable to external environmental influences.Here,we study the direct far-field imaging of the near-field polarizations based on the four-wave mixing effect.We construct a simulation model to realize the instantaneous extraction of the near-field distributions of a wide range of structured light fields,such as cylindrical vector vortex beams,plasmonic Weber beams,and topological spin textures,including photonic skyrmions and merons.This method is valuable for the studies on manipulation of structured light fields and light-matter interaction at the micro/nano scales.
文摘We compute the wake of a two-dimensional and three-dimensional flexible fin in an unsteady flow field with heaving and pitching motions using FLUENT. Deflexion mode is used for a non-uniform cantilever beam with non-uniformly distributed load. The effect of chordwise deflexion length on the characteristics of propulsion is discussed for two-dimensional flexible fin. The thrust coefficient decreases, propulsive efficiency increases and the intensity of turbulence attenuates gradually as the deflexion length increases. For a three-dimensional flexible fin, the intensity of the vortex in the plane of symmetry is higher than that in the plane at 3/4 span length of the caudal fin. But the propulsive perform.ance achieved is not what we expected with the given deflexion mode.
文摘A fluid–structure interaction method combining a nonlinear finite element algorithm with a preconditioning finite volume method is proposed in this paper to simulate parachute transient dynamics. This method uses a three-dimensional membrane–cable fabric model to represent a parachute system at a highly folded configuration. The large shape change during parachute inflation is computed by the nonlinear Newton–Raphson iteration and the linear system equation is solved by the generalized minimal residual（GMRES） method. A membrane wrinkling algorithm is also utilized to evaluate the special uniaxial tension state of membrane elements on the parachute canopy. In order to avoid large time expenses during structural nonlinear iteration, the implicit Hilber–Hughes–Taylor（HHT） time integration method is employed. For the fluid dynamic simulations, the Roe and HLLC（Harten–Lax–van Leer contact） scheme has been modified and extended to compute flow problems at all speeds. The lower–upper symmetric Gauss–Seidel（LUSGS） approximate factorization is applied to accelerate the numerical convergence speed. Finally,the test model of a highly folded C-9 parachute is simulated at a prescribed speed and the results show similar characteristics compared with experimental results and previous literature.
文摘Comprehensive studies on the crustal structures, the anomalies of geophysical field and the seismicity in Central-South Shanxi are conducted. The research results show that there are deep tectonic background for occurring moderate earthquakes in Lingshi-Jiexiu region between Linfen and Taiyuan. From now on, the region should be attached closely.
