Submerged horizontal plate can be considered as a new concept breakwater. In order to reveal the wave elimination mechanism of this type breakwater, boundary element method is utilized to investigate the velocity fiel...Submerged horizontal plate can be considered as a new concept breakwater. In order to reveal the wave elimination mechanism of this type breakwater, boundary element method is utilized to investigate the velocity field around plate carefully. The flow field analysis shows that the interaction between incident wave and reverse flow caused by submerged plate will lead to the formation of wave elimination area around both sides of the plate. The velocity magnitude of flow field has been reduced and this is the main reason of wave elimination.展开更多
In order to solve the problem of using new nozzle is proposed in fire rescue robot. middle or low water pressure to form fine water mist, a Existing water mist nozzles are basically used for high pressure and in large...In order to solve the problem of using new nozzle is proposed in fire rescue robot. middle or low water pressure to form fine water mist, a Existing water mist nozzles are basically used for high pressure and in large size, complex structure and poor low pressure atomization effect in comparison with requirement of snake-like fire rescue robots. On the basis of comprehensive typical spray noz- zles, a direct spiral double helix converging nozzle （DSDHCN） is proposed, which has the advanta- ges of small volume, light weight, simple structure, and convenient installation. To make the spray nozzle have good performance, and meet the requirements of more efficient fire extinguishing, a nu- merical study is carried out to analyze the internal and external full flow field of nozzle. A gas-liquid two-phase flow is applied to simulate the external full flow field of nozzle with VOF model in fluent software. The simulation results show the real situation of water flow out of the atomization nozzle and the water jet trajectory. Some simulations about middle or low water pressure direct spiral double he- lix converging optimized nozzle have been done in 30bar pressure. The simulation results show that the optimized nozzle structure not only makes the spray droplets have a good cone angle, but also have a sufficient axial velocity,which proves the structure rationality of the proposed optimized nozzle.展开更多
This paper presents a field based method to deal with the displacement of building cluster, which is driven by the street widening. The compress of street boundary results in the force to push the building moving insi...This paper presents a field based method to deal with the displacement of building cluster, which is driven by the street widening. The compress of street boundary results in the force to push the building moving inside and the force propagation is a decay process. To describe the phenomenon above, the field theory is introduced with the representation model of isoline. On the basis of the skeleton of Delaunay triangulation, the displacement field is built in which the propagation force is related to the adjacency degree with respect to the street boundary. The study offers the computation of displacement direction and offset distance for the building displacement. The vector operation is performed on the basis of grade and other field concepts.展开更多
In this study. an automated conformer selection procedure using generic algorithm (GA) has been applied in comparative molecular field analysis (CoMFA) method. Using genetic algorithm. the 3D-QSAR model is optimized t...In this study. an automated conformer selection procedure using generic algorithm (GA) has been applied in comparative molecular field analysis (CoMFA) method. Using genetic algorithm. the 3D-QSAR model is optimized to an optimal one. From the calculation results, a group of QSAR models with high predictive ability can be obtained, which is superior than using conventional CoMFA: meanwhile. the active conformers for these compounds in data set can be determined fi om the best model.展开更多
The objective of this research is to show a new methodology for modeling phenomena present in complex economic systems. The case study we analyzed is the adoption of open organization model among firms operating in a ...The objective of this research is to show a new methodology for modeling phenomena present in complex economic systems. The case study we analyzed is the adoption of open organization model among firms operating in a particular industry. A firm with an open system model creates and captures value taking advantage not only from the internal resource but also from external. The organization could approach to open model acquisition using different focus： external focus namely looking out of its boundary, acting and reacting to competitor innovation, costumers＇ changing, demand growth, or internal focus remaining inside its boundary improving its best capabilities ignoring what happened outside （Vagnani, Moran, ＆ Simoni, 2010）. The actors involved are firms, customers and suppliers linked together through a business to business model. The methodology is based on an Object-Oriented Analysis Field Model that allows to intuitively describe systems characterized by a large number of objects that interact, as in this case of a system composed by different organizational entities. The system simulation allows to analyze how the actors influence the acquisition and diffusion of the open organization model. This approach permits the generation of different classes of objects to represent all actors involved in the evolution of the system and to define the dynamics that determine their interaction. The solution of the model can be approximated using the Mean-Field analysis technique （Kurtz, 1978）, following the results proposed in Bobbio, Gribaudo, and Yelek （2008）. A qualitative result is illustrated in order to show the applicability of the proposed methodology and to emphasize its relevant features： flexible modeling approach, capacity of solving complex systems and output management facilities. The presented model is comprehensive and its scope is wide; it could be used to study the behavior of enterprises changing model in many different scenarios and situations. In future works quantitative results will be given, and different situations will be analyzed.展开更多
This study aims to improve the performances of the high-pressure water descaling technology used in steel hot rolling processes.In particular,a 2050 mm hot rolling line is considered,and the problem is investigated by...This study aims to improve the performances of the high-pressure water descaling technology used in steel hot rolling processes.In particular,a 2050 mm hot rolling line is considered,and the problem is investigated by means of a fluid–structure interaction(FSI)method by which the descaling effect produced by rolling coils with different section sizes is examined.Assuming a flat fan-shaped nozzle at the entrance of the R1R2 roughing mill,the outflow field characteristics and the velocity distribution curve on the strike line(at a target distance of 30–120 mm)are determined.It is found that the velocity in the center region of the water jet with different target distances is higher than that in the boundary region.As the target distance increases,the velocity of the water jet in the central region decreases.Through comparison with experimental results,it is shown that the simulation model can accurately predict the impact position of the high-pressure water on the impact plate,thereby providing a computational scheme that can be used to optimize the nozzle space layout and improve the slabs’descent effect for different rolling specifications.展开更多
To accurately acquire deep-sea live biological samples,a hydraulic suction macro-biological pressure-retaining sampler(HSMPS)was designed to achieve active capture of seafloor biological by a suction pump.The complex ...To accurately acquire deep-sea live biological samples,a hydraulic suction macro-biological pressure-retaining sampler(HSMPS)was designed to achieve active capture of seafloor biological by a suction pump.The complex flow fields of deep-sea biologicals at three different locations were simulated.The deep-sea biologicals cause the flow field pressure and velocity to rise at different locations of the sampler,and the magnitude of the rise varies at different locations.The internal flow properties of the sampler were analyzed for different pumping flow rates the sampler.When the flow rate of the sampler pump was greater than 14 m3/h,the velocity of the inlet of the inflow area was greater than the limiting velocity of the deep-sea biologicals.The pumping test of deep-sea biologicals pumping sampler was carried out in the laboratory,and the test results were basically consistent with the simulation analysis.In order to balance the deep-sea biologicals damage and escape rate,the pumping flow of the sampler should be controlled between 14 and 16 m3/h.The test results provide a theoretical basis for the design of deep-sea biologicals sampling equipment.展开更多
This study explores the aerodynamic performance and flow field characteristics of supercritical carbon dioxide(sCO_(2))centrifugal compressors under varying operating conditions.In particular,the Sandia main compresso...This study explores the aerodynamic performance and flow field characteristics of supercritical carbon dioxide(sCO_(2))centrifugal compressors under varying operating conditions.In particular,the Sandia main compressor impeller model is used as a reference system.Through three-dimensional numerical simulations,we examine the Mach number distribution,temperature field,blade pressure pulsation spectra,and velocity field evolution,and identify accordingly the operating boundaries ensuring stability and the mechanisms responsible for performance degradation.Findings indicate a stable operating range for mass flow rate between 0.74 and 3.74 kg/s.At the lower limit(0.74 kg/s),the maximum Mach number within the compressor decreases by 28%,while the temperature gradient sharpens,entropy rises notably,and fluid density varies significantly.The maximum pressure near the blades increases by 6%,yet flow velocity near the blades and outlet declines,with a 19%reduction in peak speed.Consequently,isentropic efficiency falls by 13%.Conversely,at 3.74 kg/s,the maximum Mach number increases by 23.7%,with diminished temperature gradients and minor fluid density variations.However,insufficient enthalpy gain and intensified pressure pulsations near the blades result in a 12%pressure drop.Peak velocity within the impeller channel surges by 23%,amplifying velocity gradients,inducing flow separation,and ultimately reducing the pressure ratio from 1.47 to 1.34.展开更多
In western China seismic wave fields are very complicated and have low signal to noise ratio.In this paper,we focus on complex wave field research by forward modeling and indicate that density should not be ignored in...In western China seismic wave fields are very complicated and have low signal to noise ratio.In this paper,we focus on complex wave field research by forward modeling and indicate that density should not be ignored in wave field simulation if the subsurface physical properties are quite different.We use the acoustic wave equation with density in the staggered finite-difference method to simulate the wave fields.For this purpose a complicated geologic structural model with rugged surfaces,near-surface low-velocity layers,and high-velocity outcropping layers was designed.Based on the instantaneous wave field distribution,we analyzed the mechanism forming complex wave fields.The influence of low velocity layers on the wave field is very strong.A strong waveguide occurs between the top and base of a low velocity layer,producing multiples which penetrate into the earth and form strong complex wave fields in addition to reflections from subsurface interfaces.For verifying the correctness of the simulated wave fields,prestack depth migration was performed using different algorithms from the forward modeling.The structure revealed by the stacked migration profile is same as the known structure.展开更多
Accurate on-site determination of arsenic （As） concentration as well as its speciation presents a great environmental challenge especially to developing countries. To meet the need of routine field monitoring, we de...Accurate on-site determination of arsenic （As） concentration as well as its speciation presents a great environmental challenge especially to developing countries. To meet the need of routine field monitoring, we developed a rapid colorimetric method with a wide dynamic detection range and high precision. The novel application of KMnO4 and CHaN2S as effective As（III） oxidant and As（V） reductant, respectively, in the formation of molybdenum blue complexes enabled the differentiation of As（III） and As（V）. The detection limit of the method was 8 ~tg/L with a linear range （R2 = 0.998） of four orders of magnitude in total As concentrations. The As speciation in groundwater samples determined with the colorimetric method in the field were consistent with the results using the high performance liquid chromatography atomic fluorescence spectrometry, as evidenced by a linear correlation in paired analysis with a slope of 0.9990- 0.9997 （p 〈 0.0001, n = 28）. The recovery of 96%-116% for total As, 85%-122% for As（III）, and 88%-127% for As（V） were achieved for groundwater samples with a total As concentration range 100-800 μg/L. The colorimetric result showed that 3.61 g/L As（III） existed as the only As species in a real industrial wastewater, which was in good agreement with the HPLC-AFS result of 3.56 g/L As（Ⅲ）. No interference with the color development was observed in the presence of sulfate, phosphate, silicate, humic acid, and heavy metals from complex water matrix. This accurate, sensitive, and easy-to-use method is especially suitable for field As determination.展开更多
A three-dimensional wind field analysis sollware based on the Beigng-Gucheng dual-Doppler weather radar system has been built, and evaluated by using the numerical cloud model producing storm flow and hydrometeor fiel...A three-dimensional wind field analysis sollware based on the Beigng-Gucheng dual-Doppler weather radar system has been built, and evaluated by using the numerical cloud model producing storm flow and hydrometeor fields. The effects of observation noise and the spatial distribution of wind field analysis error are also investigated.展开更多
A new approach is proposed to solve the elastic-plastic fields near the major-axis line of an elliptical hole. The complex variable method is used to determine the elastic fields near the major-axis line of the ellipt...A new approach is proposed to solve the elastic-plastic fields near the major-axis line of an elliptical hole. The complex variable method is used to determine the elastic fields near the major-axis line of the elliptical hole. Then, by using the line field analysis method, the exact and new solutions of the stresses, strains in the plastic zone, the size of the plastic region and the unit normal vector of the elastic-plastic boundary near the major-axis line of the elliptical hole are obtained for an anti-plane elliptical hole in a perfectly elastic-plastic solid. The usual small scale yielding assumptions are not adopted in the analysis. The present method is simple, easy and efficient. The influences of applied mechanical loading on the size of plastic zone are discussed.展开更多
Three-dimensional flow field of turbine in torque converter is simulated by numerical calculation in order to improve the performance of torque converter. Calculation model of a torque converter is presented based on ...Three-dimensional flow field of turbine in torque converter is simulated by numerical calculation in order to improve the performance of torque converter. Calculation model of a torque converter is presented based on the mixing-plane technology. In the calculation of flow field, the 3D N-S equations are separated by finite-volume method and solved by semi-implicit method for pressure-linked equations（SIMPLE）. Based on flow field calculation, the flow field of turbine is simulated. The velocity and pressure in the flow field of turbine are analyzed. The external performance of the torque converter is also calculated. Results of flow simulation show that there are secondary flow, off flow and velocity gradient in turbine passage. The validity of numerical simulation is verified by comparing the results of numerical simulation with experiment data.展开更多
The physical model based on heat transfer theory and virtual boundary method for analyzing unsteady thermal field of rotor plate for eddy current retarder used in automobile is established and boundary conditions are ...The physical model based on heat transfer theory and virtual boundary method for analyzing unsteady thermal field of rotor plate for eddy current retarder used in automobile is established and boundary conditions are also defined. The finite element governing equation is derived by Galerkin method. The time differential item is discrete based on Galerkin format that is stable at any condition. And a new style of varying time step method is used in iteration process. The thermal field on the rotor plate at the radial and axle directions is analyzed and varying temperature at appointed points on two side-surfaces is measured. The testing and analytical data are uniform approximately. Finite element method can be used for estimating thermal field of the rotor plate at initial design stage of eddy current retarder.展开更多
The exact shape and size of the gasification channel during underground coal gasification(UGC) are of vital importance for the safety and stability of the upper parts of the geological formation.In practice existing g...The exact shape and size of the gasification channel during underground coal gasification(UGC) are of vital importance for the safety and stability of the upper parts of the geological formation.In practice existing geological measurements are insufficient to obtain such information because the coal seam is typically deeply buried and the geological conditions are often complex.This paper introduces a cylindrical model for the gasification channel.The rock and soil masses are assumed to be homogeneous and isotropic and the effect of seepage on the temperature field was neglected.The theory of heat conduction was used to write the equation predicting the temperature field around the gasification channel.The idea of an excess temperature was introduced to solve the equations.Applying this model to UCG in the field for an influence radius,r,of 70 m gave the model parameters,u1,2,3...,of 2.4,5.5,8.7...By adjusting the radius(2,4,or 6 m) reasonable temperatures of the gasification channel were found for 4 m.The temperature distribution in the vertical direction,and the combustion volume,were also calculated.Comparison to field measurements shows that the results obtained from the proposed model are very close to practice.展开更多
In terms of formation mechanisms of linear dunes,there are open arguments for their widespread distribution and multi-morphological diversities.In order to clarify the formation mechanism of linear dunes of Qarhan Sal...In terms of formation mechanisms of linear dunes,there are open arguments for their widespread distribution and multi-morphological diversities.In order to clarify the formation mechanism of linear dunes of Qarhan Salt Lake,we used pattern analysis method to analyze the statistical characteristics and spatial variation of their pattern parameters.Except at the west-northwest margin,the pattern parameters showed regular spatial variation from the up-middle part towards the downwind end of the dune field.Based on the cumulative probability plots for inter-crest spacing and crest length,we divided the linear dunes into three groups,which corresponding to the three evolution stages of these dunes.The first group comprises erosional relics,with shorter crests,smaller inter-crest spacing and more random dune orientation.The second group comprises dunes whose sand supply is just sufficient to maintain stability and these dunes are approaching the net erosion stage.The crest length and inter-crest spacing of these dunes are much larger than those of the first group,and dune orientation is closer to the resultant drift direction （RDD） .The last group comprises linear dunes that are still undergoing vertical accretion and longitudinal elongation,which follows the RDD of the modern wind regime.The presence of regular spatial variation of pattern parameters and a similar geometry with the vegetated linear dunes suggest that deposition and erosion coexist in the development and evolution of linear dunes of Qarhan Salt Lake,i.e.deposition predominates at the downwind end of linear dunes in the vertical accretion and longitudinal elongation stage,whereas erosion mainly occurs at the upwind end of linear dunes in the degradation stage.Therefore,the formation mechanism of linear dunes in Qarhan Salt Lake can be reasonably explained by the combination of depositional and erosional theories.展开更多
The HT-7U super-conducting tokamak is a full super-conducting magnetically confined fusion device, It mainly consists of super-conducting toroidal field (TF) coils and super conducting poloidal field (PF) coils. This...The HT-7U super-conducting tokamak is a full super-conducting magnetically confined fusion device, It mainly consists of super-conducting toroidal field (TF) coils and super conducting poloidal field (PF) coils. This paper describes the distribution of magnetic field, ripple and electromagnetic loads of TF system, some results are necessary to analyze and calculate the stresses and deformation on TF system by a finite element method. Meanwhile, in this paper, the main scope of the calculation is carried out for the case of constant magnetic field on conductor of the TF coil winding in order to provide electromagnet parameters for the quench analysis of Cable-in-Conduit Conductor (CICC) of TF system in HT-7U.展开更多
The structural feature shown on a remote sensing image is a synthetic result ofcombination of the deformations produced during the entire geological history of an area.Therefore, the respective tectonic stress field o...The structural feature shown on a remote sensing image is a synthetic result ofcombination of the deformations produced during the entire geological history of an area.Therefore, the respective tectonic stress field of each of the different stages in the complexdeformation of an area can be reconstructed in three steps: (1) geological structures formed atdifferent times are distinguished in remote sensing image interpretation; (2) structuraldeformation fields at different stages are determined by analyzing relationships betweenmicrostructures (joints and fractures) and the related structures (folds and faults); and (3)tectonic stress fields at different stages are respectively recovered through a study of the featuresof structural deformation fields in different periods. Circular structures and related circlular and radial joints are correlated in space to con-cealed structural rises. The authors propose a new method for establishing a natural model ofthe concealed structural rises and calculating the tectonic stress field by using quantitative dataof the remote sensing information of circular structures and related linear structures.展开更多
We successfully developed a set of technical methods constructing fine climatic analysis field for regional precipitation considering terrain influence based on PRISM monthly climatic precipitation analysis field and ...We successfully developed a set of technical methods constructing fine climatic analysis field for regional precipitation considering terrain influence based on PRISM monthly climatic precipitation analysis field and DEM. By using harmonic analysis and Shepard inverse distance interpolation,we quantitatively analyzed precipitation observation data at 68 reference weather stations of Zhejiang Province in recent 50 years,and established climatic analysis field of daily precipitation at 1 km grid of Zhejiang Province considering terrain influence. Systemic cross-examination of the method was conducted. Result showed that the established fine climatic field for precipitation could reproduce rapid seasonal evolution characteristics of precipitation induced by monsoon migration and typhoon landing with better quantitative accuracy.展开更多
During summer Monex-79, a variety of observing systems viz. research ships, research aircrafts, constant pressure balloons and geostationary satellite etc. were deployed, besides the regular conventional observations....During summer Monex-79, a variety of observing systems viz. research ships, research aircrafts, constant pressure balloons and geostationary satellite etc. were deployed, besides the regular conventional observations. The purpose of these additional systems was to make the best possible data for the studies on various aspects of monsoon circulation. The present study is aimed at the construction of vertical wind profile using cloud motion vectors obtained from GOES (I-O) satellite and to examine whether the constructed wind profiles improves the representation of the monsoon system, flow pattern etc. in the objective analysis. For this purpose, climatological normals of the wind field are considered as the initial guess and the objective analyses of the wind field are made with, first using only data from conventional observations over land areas, subsequently including the constructed winds from cloud motion vectors. These analyses are then compared with the standard analyses of wind field obtained from Quick Look Atlas by T. N. Krishnamurti et al. (1979).It is inferred that satellite estimated mean wind profiles show good agreement with the mean wind profiles of the research ships with RMS errors less than 5 mps below 500 hPa and less than 8 mps above 500 hPa. It is further inferred that the inclusion of constructed winds shows a positive impact on the objective analysis and improvement is seen to be more marked in the data-sparse region of the Arabian sea. Analyses which include the constructed winds show better agreement with the standard analysis, than the analyses obtained using only conventional winds. Thus, results of our study suggest that the wind profiles constructed using cloud motion vectors are of potential use in objective analysis to depict the major circulation features over the Indian region.展开更多
基金supported by the Fundamental Research Funds for the Dalian University of Technology(Grant No.DUT10LK43)the National Key Basic Research Program of China(Grant No.2013CB036101)
文摘Submerged horizontal plate can be considered as a new concept breakwater. In order to reveal the wave elimination mechanism of this type breakwater, boundary element method is utilized to investigate the velocity field around plate carefully. The flow field analysis shows that the interaction between incident wave and reverse flow caused by submerged plate will lead to the formation of wave elimination area around both sides of the plate. The velocity magnitude of flow field has been reduced and this is the main reason of wave elimination.
基金Supported by the National Natural Science Foundation of China(No.61105086)Self-Planned Task(SKLRS-2010-MS-12)of State Key Laboratory of Robotics and System(HIT)Hubei Province Natural Science Foundation(No.2010CDB03405)
文摘In order to solve the problem of using new nozzle is proposed in fire rescue robot. middle or low water pressure to form fine water mist, a Existing water mist nozzles are basically used for high pressure and in large size, complex structure and poor low pressure atomization effect in comparison with requirement of snake-like fire rescue robots. On the basis of comprehensive typical spray noz- zles, a direct spiral double helix converging nozzle （DSDHCN） is proposed, which has the advanta- ges of small volume, light weight, simple structure, and convenient installation. To make the spray nozzle have good performance, and meet the requirements of more efficient fire extinguishing, a nu- merical study is carried out to analyze the internal and external full flow field of nozzle. A gas-liquid two-phase flow is applied to simulate the external full flow field of nozzle with VOF model in fluent software. The simulation results show the real situation of water flow out of the atomization nozzle and the water jet trajectory. Some simulations about middle or low water pressure direct spiral double he- lix converging optimized nozzle have been done in 30bar pressure. The simulation results show that the optimized nozzle structure not only makes the spray droplets have a good cone angle, but also have a sufficient axial velocity,which proves the structure rationality of the proposed optimized nozzle.
文摘This paper presents a field based method to deal with the displacement of building cluster, which is driven by the street widening. The compress of street boundary results in the force to push the building moving inside and the force propagation is a decay process. To describe the phenomenon above, the field theory is introduced with the representation model of isoline. On the basis of the skeleton of Delaunay triangulation, the displacement field is built in which the propagation force is related to the adjacency degree with respect to the street boundary. The study offers the computation of displacement direction and offset distance for the building displacement. The vector operation is performed on the basis of grade and other field concepts.
文摘In this study. an automated conformer selection procedure using generic algorithm (GA) has been applied in comparative molecular field analysis (CoMFA) method. Using genetic algorithm. the 3D-QSAR model is optimized to an optimal one. From the calculation results, a group of QSAR models with high predictive ability can be obtained, which is superior than using conventional CoMFA: meanwhile. the active conformers for these compounds in data set can be determined fi om the best model.
文摘The objective of this research is to show a new methodology for modeling phenomena present in complex economic systems. The case study we analyzed is the adoption of open organization model among firms operating in a particular industry. A firm with an open system model creates and captures value taking advantage not only from the internal resource but also from external. The organization could approach to open model acquisition using different focus： external focus namely looking out of its boundary, acting and reacting to competitor innovation, costumers＇ changing, demand growth, or internal focus remaining inside its boundary improving its best capabilities ignoring what happened outside （Vagnani, Moran, ＆ Simoni, 2010）. The actors involved are firms, customers and suppliers linked together through a business to business model. The methodology is based on an Object-Oriented Analysis Field Model that allows to intuitively describe systems characterized by a large number of objects that interact, as in this case of a system composed by different organizational entities. The system simulation allows to analyze how the actors influence the acquisition and diffusion of the open organization model. This approach permits the generation of different classes of objects to represent all actors involved in the evolution of the system and to define the dynamics that determine their interaction. The solution of the model can be approximated using the Mean-Field analysis technique （Kurtz, 1978）, following the results proposed in Bobbio, Gribaudo, and Yelek （2008）. A qualitative result is illustrated in order to show the applicability of the proposed methodology and to emphasize its relevant features： flexible modeling approach, capacity of solving complex systems and output management facilities. The presented model is comprehensive and its scope is wide; it could be used to study the behavior of enterprises changing model in many different scenarios and situations. In future works quantitative results will be given, and different situations will be analyzed.
基金The research was funded by Science and Technology Project of Hebei Education Department(Project Number:QN2022198).Y.C.received the grant.
文摘This study aims to improve the performances of the high-pressure water descaling technology used in steel hot rolling processes.In particular,a 2050 mm hot rolling line is considered,and the problem is investigated by means of a fluid–structure interaction(FSI)method by which the descaling effect produced by rolling coils with different section sizes is examined.Assuming a flat fan-shaped nozzle at the entrance of the R1R2 roughing mill,the outflow field characteristics and the velocity distribution curve on the strike line(at a target distance of 30–120 mm)are determined.It is found that the velocity in the center region of the water jet with different target distances is higher than that in the boundary region.As the target distance increases,the velocity of the water jet in the central region decreases.Through comparison with experimental results,it is shown that the simulation model can accurately predict the impact position of the high-pressure water on the impact plate,thereby providing a computational scheme that can be used to optimize the nozzle space layout and improve the slabs’descent effect for different rolling specifications.
基金Supported by National Key Research and Development Program of China(Grant Nos.2023YFC2809304,2022YFC2805904)National Natural Science Foundation of China(Grant No.52275106)Special Project for the Construction of Innovative City in Xiangtan of China(Grant No.ZX-ZD20221005).
文摘To accurately acquire deep-sea live biological samples,a hydraulic suction macro-biological pressure-retaining sampler(HSMPS)was designed to achieve active capture of seafloor biological by a suction pump.The complex flow fields of deep-sea biologicals at three different locations were simulated.The deep-sea biologicals cause the flow field pressure and velocity to rise at different locations of the sampler,and the magnitude of the rise varies at different locations.The internal flow properties of the sampler were analyzed for different pumping flow rates the sampler.When the flow rate of the sampler pump was greater than 14 m3/h,the velocity of the inlet of the inflow area was greater than the limiting velocity of the deep-sea biologicals.The pumping test of deep-sea biologicals pumping sampler was carried out in the laboratory,and the test results were basically consistent with the simulation analysis.In order to balance the deep-sea biologicals damage and escape rate,the pumping flow of the sampler should be controlled between 14 and 16 m3/h.The test results provide a theoretical basis for the design of deep-sea biologicals sampling equipment.
基金National Science Foundation of China(grant numbers 52366009 and 52130607)Doble First-Class Key Programof Gansu Provincial Department of Education(grant number GCJ2022-38)+1 种基金2022 Gansu Provincial University Industry Support Plan Project(grant number 2022CYZC-21)KeyR&DProgramofGansu Province of China(grant number 22YF7GA163).
文摘This study explores the aerodynamic performance and flow field characteristics of supercritical carbon dioxide(sCO_(2))centrifugal compressors under varying operating conditions.In particular,the Sandia main compressor impeller model is used as a reference system.Through three-dimensional numerical simulations,we examine the Mach number distribution,temperature field,blade pressure pulsation spectra,and velocity field evolution,and identify accordingly the operating boundaries ensuring stability and the mechanisms responsible for performance degradation.Findings indicate a stable operating range for mass flow rate between 0.74 and 3.74 kg/s.At the lower limit(0.74 kg/s),the maximum Mach number within the compressor decreases by 28%,while the temperature gradient sharpens,entropy rises notably,and fluid density varies significantly.The maximum pressure near the blades increases by 6%,yet flow velocity near the blades and outlet declines,with a 19%reduction in peak speed.Consequently,isentropic efficiency falls by 13%.Conversely,at 3.74 kg/s,the maximum Mach number increases by 23.7%,with diminished temperature gradients and minor fluid density variations.However,insufficient enthalpy gain and intensified pressure pulsations near the blades result in a 12%pressure drop.Peak velocity within the impeller channel surges by 23%,amplifying velocity gradients,inducing flow separation,and ultimately reducing the pressure ratio from 1.47 to 1.34.
基金supported in part by the National Natural Science Foundation of China(Grant No.40974069)PetroChina Innovation Foundation(Grant No.2009D-5006-03-01)+1 种基金National Key Basic Research Development Program(GrantNo.2007CB209601)National Major Science and Technology Program(Grant Nos.2008ZX05010-002 and 2008ZX05024-001)
文摘In western China seismic wave fields are very complicated and have low signal to noise ratio.In this paper,we focus on complex wave field research by forward modeling and indicate that density should not be ignored in wave field simulation if the subsurface physical properties are quite different.We use the acoustic wave equation with density in the staggered finite-difference method to simulate the wave fields.For this purpose a complicated geologic structural model with rugged surfaces,near-surface low-velocity layers,and high-velocity outcropping layers was designed.Based on the instantaneous wave field distribution,we analyzed the mechanism forming complex wave fields.The influence of low velocity layers on the wave field is very strong.A strong waveguide occurs between the top and base of a low velocity layer,producing multiples which penetrate into the earth and form strong complex wave fields in addition to reflections from subsurface interfaces.For verifying the correctness of the simulated wave fields,prestack depth migration was performed using different algorithms from the forward modeling.The structure revealed by the stacked migration profile is same as the known structure.
基金the financial support of the National Natural Science Foundation of China (No. 20977098,20921063)the National Basic Research Program (973) of China (No. 2010CB933502)
文摘Accurate on-site determination of arsenic （As） concentration as well as its speciation presents a great environmental challenge especially to developing countries. To meet the need of routine field monitoring, we developed a rapid colorimetric method with a wide dynamic detection range and high precision. The novel application of KMnO4 and CHaN2S as effective As（III） oxidant and As（V） reductant, respectively, in the formation of molybdenum blue complexes enabled the differentiation of As（III） and As（V）. The detection limit of the method was 8 ~tg/L with a linear range （R2 = 0.998） of four orders of magnitude in total As concentrations. The As speciation in groundwater samples determined with the colorimetric method in the field were consistent with the results using the high performance liquid chromatography atomic fluorescence spectrometry, as evidenced by a linear correlation in paired analysis with a slope of 0.9990- 0.9997 （p 〈 0.0001, n = 28）. The recovery of 96%-116% for total As, 85%-122% for As（III）, and 88%-127% for As（V） were achieved for groundwater samples with a total As concentration range 100-800 μg/L. The colorimetric result showed that 3.61 g/L As（III） existed as the only As species in a real industrial wastewater, which was in good agreement with the HPLC-AFS result of 3.56 g/L As（Ⅲ）. No interference with the color development was observed in the presence of sulfate, phosphate, silicate, humic acid, and heavy metals from complex water matrix. This accurate, sensitive, and easy-to-use method is especially suitable for field As determination.
文摘A three-dimensional wind field analysis sollware based on the Beigng-Gucheng dual-Doppler weather radar system has been built, and evaluated by using the numerical cloud model producing storm flow and hydrometeor fields. The effects of observation noise and the spatial distribution of wind field analysis error are also investigated.
基金supported by the National Natural Science Foundation of China (Grant Nos. 10932001 and 11072015)the Scientific Research Key Program of Beijing Municipal Commission of Education (Grant No. KZ201010005003)the PhD Innovative Foundation of Beihang University (Grant No. 300351)
文摘A new approach is proposed to solve the elastic-plastic fields near the major-axis line of an elliptical hole. The complex variable method is used to determine the elastic fields near the major-axis line of the elliptical hole. Then, by using the line field analysis method, the exact and new solutions of the stresses, strains in the plastic zone, the size of the plastic region and the unit normal vector of the elastic-plastic boundary near the major-axis line of the elliptical hole are obtained for an anti-plane elliptical hole in a perfectly elastic-plastic solid. The usual small scale yielding assumptions are not adopted in the analysis. The present method is simple, easy and efficient. The influences of applied mechanical loading on the size of plastic zone are discussed.
基金This project is supported by National Natural Science Foundation of China (No. 50175042).
文摘Three-dimensional flow field of turbine in torque converter is simulated by numerical calculation in order to improve the performance of torque converter. Calculation model of a torque converter is presented based on the mixing-plane technology. In the calculation of flow field, the 3D N-S equations are separated by finite-volume method and solved by semi-implicit method for pressure-linked equations（SIMPLE）. Based on flow field calculation, the flow field of turbine is simulated. The velocity and pressure in the flow field of turbine are analyzed. The external performance of the torque converter is also calculated. Results of flow simulation show that there are secondary flow, off flow and velocity gradient in turbine passage. The validity of numerical simulation is verified by comparing the results of numerical simulation with experiment data.
基金Department of Science and Technology of Jiangsu Province,China(No. BE2003-46).
文摘The physical model based on heat transfer theory and virtual boundary method for analyzing unsteady thermal field of rotor plate for eddy current retarder used in automobile is established and boundary conditions are also defined. The finite element governing equation is derived by Galerkin method. The time differential item is discrete based on Galerkin format that is stable at any condition. And a new style of varying time step method is used in iteration process. The thermal field on the rotor plate at the radial and axle directions is analyzed and varying temperature at appointed points on two side-surfaces is measured. The testing and analytical data are uniform approximately. Finite element method can be used for estimating thermal field of the rotor plate at initial design stage of eddy current retarder.
基金supported by a grant from the Major State Basic Research and Development Program of China (No. 2007CB714102)sponsored by the Fundamental Research Funds for the Central Universities (No. 2009B00714)
文摘The exact shape and size of the gasification channel during underground coal gasification(UGC) are of vital importance for the safety and stability of the upper parts of the geological formation.In practice existing geological measurements are insufficient to obtain such information because the coal seam is typically deeply buried and the geological conditions are often complex.This paper introduces a cylindrical model for the gasification channel.The rock and soil masses are assumed to be homogeneous and isotropic and the effect of seepage on the temperature field was neglected.The theory of heat conduction was used to write the equation predicting the temperature field around the gasification channel.The idea of an excess temperature was introduced to solve the equations.Applying this model to UCG in the field for an influence radius,r,of 70 m gave the model parameters,u1,2,3...,of 2.4,5.5,8.7...By adjusting the radius(2,4,or 6 m) reasonable temperatures of the gasification channel were found for 4 m.The temperature distribution in the vertical direction,and the combustion volume,were also calculated.Comparison to field measurements shows that the results obtained from the proposed model are very close to practice.
基金funded by the National Basic Research Program of China (2013CB956000)the National Natural Science Foundation of China (41171010,41371102,41301003)
文摘In terms of formation mechanisms of linear dunes,there are open arguments for their widespread distribution and multi-morphological diversities.In order to clarify the formation mechanism of linear dunes of Qarhan Salt Lake,we used pattern analysis method to analyze the statistical characteristics and spatial variation of their pattern parameters.Except at the west-northwest margin,the pattern parameters showed regular spatial variation from the up-middle part towards the downwind end of the dune field.Based on the cumulative probability plots for inter-crest spacing and crest length,we divided the linear dunes into three groups,which corresponding to the three evolution stages of these dunes.The first group comprises erosional relics,with shorter crests,smaller inter-crest spacing and more random dune orientation.The second group comprises dunes whose sand supply is just sufficient to maintain stability and these dunes are approaching the net erosion stage.The crest length and inter-crest spacing of these dunes are much larger than those of the first group,and dune orientation is closer to the resultant drift direction （RDD） .The last group comprises linear dunes that are still undergoing vertical accretion and longitudinal elongation,which follows the RDD of the modern wind regime.The presence of regular spatial variation of pattern parameters and a similar geometry with the vegetated linear dunes suggest that deposition and erosion coexist in the development and evolution of linear dunes of Qarhan Salt Lake,i.e.deposition predominates at the downwind end of linear dunes in the vertical accretion and longitudinal elongation stage,whereas erosion mainly occurs at the upwind end of linear dunes in the degradation stage.Therefore,the formation mechanism of linear dunes in Qarhan Salt Lake can be reasonably explained by the combination of depositional and erosional theories.
文摘The HT-7U super-conducting tokamak is a full super-conducting magnetically confined fusion device, It mainly consists of super-conducting toroidal field (TF) coils and super conducting poloidal field (PF) coils. This paper describes the distribution of magnetic field, ripple and electromagnetic loads of TF system, some results are necessary to analyze and calculate the stresses and deformation on TF system by a finite element method. Meanwhile, in this paper, the main scope of the calculation is carried out for the case of constant magnetic field on conductor of the TF coil winding in order to provide electromagnet parameters for the quench analysis of Cable-in-Conduit Conductor (CICC) of TF system in HT-7U.
基金This study was sponsored by The Open Research Laboratory of Quantitative Prediction,Exploration and Assessment of Mineral Resources,MGMR,China.
文摘The structural feature shown on a remote sensing image is a synthetic result ofcombination of the deformations produced during the entire geological history of an area.Therefore, the respective tectonic stress field of each of the different stages in the complexdeformation of an area can be reconstructed in three steps: (1) geological structures formed atdifferent times are distinguished in remote sensing image interpretation; (2) structuraldeformation fields at different stages are determined by analyzing relationships betweenmicrostructures (joints and fractures) and the related structures (folds and faults); and (3)tectonic stress fields at different stages are respectively recovered through a study of the featuresof structural deformation fields in different periods. Circular structures and related circlular and radial joints are correlated in space to con-cealed structural rises. The authors propose a new method for establishing a natural model ofthe concealed structural rises and calculating the tectonic stress field by using quantitative dataof the remote sensing information of circular structures and related linear structures.
基金Supported by Nonprofit Technology Application and Research Item of 2011,Zhejiang Science and Technology Department,China(2011C33G1610011)
文摘We successfully developed a set of technical methods constructing fine climatic analysis field for regional precipitation considering terrain influence based on PRISM monthly climatic precipitation analysis field and DEM. By using harmonic analysis and Shepard inverse distance interpolation,we quantitatively analyzed precipitation observation data at 68 reference weather stations of Zhejiang Province in recent 50 years,and established climatic analysis field of daily precipitation at 1 km grid of Zhejiang Province considering terrain influence. Systemic cross-examination of the method was conducted. Result showed that the established fine climatic field for precipitation could reproduce rapid seasonal evolution characteristics of precipitation induced by monsoon migration and typhoon landing with better quantitative accuracy.
文摘During summer Monex-79, a variety of observing systems viz. research ships, research aircrafts, constant pressure balloons and geostationary satellite etc. were deployed, besides the regular conventional observations. The purpose of these additional systems was to make the best possible data for the studies on various aspects of monsoon circulation. The present study is aimed at the construction of vertical wind profile using cloud motion vectors obtained from GOES (I-O) satellite and to examine whether the constructed wind profiles improves the representation of the monsoon system, flow pattern etc. in the objective analysis. For this purpose, climatological normals of the wind field are considered as the initial guess and the objective analyses of the wind field are made with, first using only data from conventional observations over land areas, subsequently including the constructed winds from cloud motion vectors. These analyses are then compared with the standard analyses of wind field obtained from Quick Look Atlas by T. N. Krishnamurti et al. (1979).It is inferred that satellite estimated mean wind profiles show good agreement with the mean wind profiles of the research ships with RMS errors less than 5 mps below 500 hPa and less than 8 mps above 500 hPa. It is further inferred that the inclusion of constructed winds shows a positive impact on the objective analysis and improvement is seen to be more marked in the data-sparse region of the Arabian sea. Analyses which include the constructed winds show better agreement with the standard analysis, than the analyses obtained using only conventional winds. Thus, results of our study suggest that the wind profiles constructed using cloud motion vectors are of potential use in objective analysis to depict the major circulation features over the Indian region.
