Insufficient interfacial activity and poor wettability between fibers and matrix are the two main factors limiting the improvement of mechanical properties of Carbon Fiber Reinforced Plastics(CFRP).Owl feathers are kn...Insufficient interfacial activity and poor wettability between fibers and matrix are the two main factors limiting the improvement of mechanical properties of Carbon Fiber Reinforced Plastics(CFRP).Owl feathers are known for their unique compact structure;they are not only lightweight but also strong.In this study,an in-depth look at owl feathers was made and it found that owl feathers not only have the macro branches structure between feather shafts and branches but also have fine feather structures on the branches.The presence of these fine feather structures increases the specific surface area of the plume branches and allows neighboring plume branches to hook up with each other,forming an effective mechanical interlocking structure.These structures bring owl feathers excellent mechanical properties.Inspired by the natural structure of owl feathers,a weaving technique and a sizing process were combined to prepare bionic Carbon Fiber(CF)fabrics and then to fabricate the bionic CFRP with structural characteristics similar to owl feathers.To evaluate the effect of the fine feather structure on the mechanical properties of CFRP,a mechanical property study on CFRP with and without the fine feather imitation structure were conducted.The experimental results show that the introduction of the fine feather branch structure enhance the mechanical properties of CFRP significantly.Specifically,the tensile strength of the composites increased by 6.42%and 13.06%and the flexural strength increased by 8.02%and 16.87%in the 0°and 90°sample directions,respectively.These results provide a new design idea for the improvement of the mechanical properties of the CFRP,promoting the application of CFRP in engineering fields,such as automotive transportation,rail transit,aerospace,and construction.展开更多
This research explores the water uptake behavior of glass fiber/epoxy composites filled with nanoclay and establishes an Artificial Neural Network(ANN)to predict water uptake percentage fromexperimental parameters.Com...This research explores the water uptake behavior of glass fiber/epoxy composites filled with nanoclay and establishes an Artificial Neural Network(ANN)to predict water uptake percentage fromexperimental parameters.Composite laminates are fabricated with varying glass fiber(40-60 wt.%)and nanoclay(0-4 wt.%)contents.Water absorption is evaluated for 70 days of immersion following ASTM D570-98 standards.The inclusion of nanoclay reduces water uptake by creating a tortuous path for moisture diffusion due to its high aspect ratio and platelet morphology,thereby enhancing the composite’s barrier properties.The ANN model is developed with a 3-4-1 feedforward structure and learned through the Levenberg-Marquardt algorithm with soaking time(7 to 70 days),fiber content(40,50,and 60 wt.%)and nanoclay content(0,2,and 4 wt.%)as input parameters.The model’s output is the water uptake percentage.The model has high prediction efficiency,with a correlation coefficient(R)of 0.998 and a mean squared error of 1.38×10^(-4).Experimental and predicted values are in excellent agreement,ensuring the reliability of the ANN for the simulation of nonlinear water absorption behavior.The results identify the synergistic capability of nanoclay and fiber concentration to reduce water absorption and prove the feasibility of ANN as a substitute for time-consuming testing in composite durability estimation.展开更多
In order to explore the effect of artificial accelerated aging temperature on the performance of carbon fiber/epoxy resin composites,we used artificial seawater as the aging medium,designed the aging environment of se...In order to explore the effect of artificial accelerated aging temperature on the performance of carbon fiber/epoxy resin composites,we used artificial seawater as the aging medium,designed the aging environment of seawater at different temperatures under normal pressure,and studied the aging behavior of carbon fiber/epoxy composites.The infrared spectroscopy results show that,with the increase of aging temperature,the degree of hydrolysis of the composite is greater.At the same time,after 250 days of aging of artificial seawater at regular temperature,40 and 60 ℃,the moisture absorption rates of composite materials were 0.45%,0.63%,and 1.05%,and the retention rates of interlaminar shear strength were 91%,78%,and 62%,respectively.It is shown that the temperature of the aging environment has a significant impact on the hygroscopic behavior and mechanical properties of the composite,that is,the higher the temperature,the faster the moisture absorption of the composite,and the faster the decay of the mechanical properties of the composite.展开更多
Microwave processing was used to cure the carbon fiber/epoxy composites and designed for improving the compressive strength of the materials. By controlling the power of microwave heating, vacuum bagged laminates were...Microwave processing was used to cure the carbon fiber/epoxy composites and designed for improving the compressive strength of the materials. By controlling the power of microwave heating, vacuum bagged laminates were fabricated under one atmosphere pressure without arcing. The physical and mechanical properties of composites produced through vacuum bagging using microwave and thermal curing were compared and the multistep （2-step or 3-step） microwave curing process for improved compressive properties was established. The results indicated that microwave cured samples had somewhat differentiated molecular structure and showed slightly higher glass transition temperature. The 2-step process was found to be more conducive to the enhancement of the compressive strength than the 3-step process. A 39% cure cycle time reduction and a 22% compressive strength increment were achieved for the composites manufactured with microwave radiation. The improvement in specific compressive strength was attributed to better interracial bonding between resin matrix and the fibers, which was also demonstrated via scanning electron microscopy analysis.展开更多
Microwave irradiation was used to reduce the curing time of carbon fiber/epoxy resin composite material.The properties of carbon fiber/epoxy resin composite material under microwave curing were investigated by thermog...Microwave irradiation was used to reduce the curing time of carbon fiber/epoxy resin composite material.The properties of carbon fiber/epoxy resin composite material under microwave curing were investigated by thermogravimetry(TG),dynamic mechanical analysis(DMA),impact strength test and scanning electron microscope(SEM).The results show that composite materials patch have high thermal stability after microwave curing.The initial degradation temperature is 330.9℃,the maximum thermal decomposition rate is at 368.1℃.When the layer of composite materials patchis 4 layers,the dynamic mechanical properties are the best after microwave curing.The initial storage modulus is 43.2 GPa,increased 28.3 GPa and 27.1 GPa than 3 layers and 5 layers,the glass transition temperature(Tg)is 67.48℃,increased about 12 ℃than 3 layers and 5 layers.Microwave curing can significantly improve the infiltration capacity of epoxy resin,enhance interfacial bonding,and increase the impact strength of composite patch.Under microwave curing,the impact strength of 3,4,5-layers composite material patches increases 35.9%,6.4% and 15.1%,respectively than heating curing.The SEM analysis of impact fracture surface shows that microwave curing can improve the interface of carbon fiber and epoxy resin.展开更多
To meet the requirements of spacecraft for the thermal conductivity of resins and solve the problem of low thermal conduction efficiency when 3D printing complex parts,we propose a new type of continuous mesophase-pit...To meet the requirements of spacecraft for the thermal conductivity of resins and solve the problem of low thermal conduction efficiency when 3D printing complex parts,we propose a new type of continuous mesophase-pitch-based carbon fiber/thermoplastic polyurethane/epoxy(CMPCF/TPU/epoxy)composite filament and its preparation process in this study.The composite filament is based on the high thermal conductivity of CMPCF,the high elasticity of TPU,and the high-temperature resistance of epoxy.The tensile strength and thermal conductivity of the CMPCF/TPU/epoxy composite filament were tested.The CMPCF/TPU/epoxy composites are formed by 3D printing technology,and the composite filament is laid according to the direction of heat conduction so that the printed part can meet the needs of directional heat conduction.The experimental results show that the thermal conductivity of the printed sample is 40.549 W/(m·K),which is 160 times that of pure epoxy resin(0.254 W/(m·K)).It is also approximately 13 times better than that of polyacrylonitrile carbon fiber/epoxy(PAN-CF/epoxy)composites.This study breaks through the technical bottleneck of poor printability of CMPCF.It provides a new method for achieving directional thermal conductivity printing,which is important for the development of complex high-performance thermal conductivity products.展开更多
In this study,the influence of sodium hydroxide(NaOH)treatment and microwave treatment of coir fibers on the mechanical and physical properties of pressed coir fiber/epoxy composite were evaluated.The composite was fa...In this study,the influence of sodium hydroxide(NaOH)treatment and microwave treatment of coir fibers on the mechanical and physical properties of pressed coir fiber/epoxy composite were evaluated.The composite was fabricated with a hand lay-up method with compression molding.Before composite fabrication,pressed coir fiber was treated with NaOH and microwave treatments.Mechanical testing(tensile,flexural,and impact testing)of the composite was conducted.Then,water absorption and thickness swelling testing are also performed.The fractured composite surface morphology after the tensile test was analyzed by scanning electronic microscopy(SEM).The results revealed that tensile,flexural,and impact strengths of composite tend to increase after NaOH treatment of coir fiber followed by microwave treatment for 10 and 20 minutes of exposure time compared to untreated fiber.However,for NaOH treatment,the tensile,flexural and,impact strengths of composite reduce.The reducing of the tensile strength of the composite is due to the agglomeration fiber occurred,which is displayed in the SEM micrograph.Furthermore,microwave treatment of fiber for 10 minutes and NaOH treatment followed by microwave treatment for 20 minutes of exposure time decreases the water absorption and thickness swelling of the composite.展开更多
The residual resources of ramie fiber-based textile products were used as raw materials.Ramie fiber felt(RF)was modified by NaClO_(2) aqueous solution and then impregnated with water-based epoxy resin(WER).RF/WER tran...The residual resources of ramie fiber-based textile products were used as raw materials.Ramie fiber felt(RF)was modified by NaClO_(2) aqueous solution and then impregnated with water-based epoxy resin(WER).RF/WER transparent composite materials were prepared by lamination hot pressing process.The composite materials’color difference,transmittance,haze,density,water absorption,and mechanical properties were determined to assess the effects of NaClO_(2) treatment and the number of ramie fiber layers on the properties of the prepared composites.The results showed significantly improved optical and mechanical properties of the RF/WER transparent composites after NaClO_(2) treatment.With the increase of ramie fiber layers,the composites’whiteness,transmittance,and water absorption decreased while the haze increased.For material with three layers,the optical transmittance in the visible light region was 82%,and the haze was 96%,indicating the material has both high transmittance and high haze characteristics.The tensile strength increases with the increase of the number of layers,and the tensile strength of the composite with six layers is 243 MPa.This study broadens the scope of application of ramie fiber as a new option for home decoration materials.展开更多
Microwave processing has great potential for improving composite manufacturing such as reduction of curing time, energy requirements and operational costs. In this paper, the effects of microwave irradiation for resin...Microwave processing has great potential for improving composite manufacturing such as reduction of curing time, energy requirements and operational costs. In this paper, the effects of microwave irradiation for resin-curing of carbon fiber/epoxy resin composite that was composed of discontinuous carbon fibers of 130 μm or 3 mm were investigated. The mechanical properties of carbon fiber/epoxy resin composite cured by microwave irradiation for 20 min at 120°C were similar to ones of the sample prepared by conventional oven for 180 min at 120°C. Microwavecured carbon fiber/epoxy resin composite had higher glass transition temperature than the one prepared by conventional oven. The relation between curing time and flexural modulus indicated that the curing velocity of microwave-irradiated carbon fiber/epoxy resin composite was 9 times faster than the one prepared by conventional oven. Furthermore, activation energies for resincuring reaction on microwave and conventional-cured carbon fiber/epoxy resin composite were estimated. The resin-curing reaction in carbon fiber/epoxy resin composite was promoted by microwave irradiation.展开更多
In order to enhance the interfacial adhesion of carbon fiber(CF)and polymer matrix,a multiscale gradient modulus intermediate layer with rigid-flexible(GO-PA)hierarchical structure was designed and fabricated between ...In order to enhance the interfacial adhesion of carbon fiber(CF)and polymer matrix,a multiscale gradient modulus intermediate layer with rigid-flexible(GO-PA)hierarchical structure was designed and fabricated between CFs and matrix by a facile and businesslike strategy.The polarity,roughness and wettability of CFs surface as well as the thickness of intermediate layer in composite have been significantly increased after rigid-flexible hierarchical structure was constructed.The IFSS,ILSS,compression and impact toughness manifested that the hierarchical structure could bring about a fantastic improvement(76.8%,46.4%,40.7%and 37.8%)for the interfacial and mechanical properties than other previous reports.Consequently,the establishment of CF surface with gradient modulus rigid-flexible hierarchical structure via regulation of nanoparticles and polymer array would open a new,viable and promising route to obtaining high-performance composites.展开更多
In this paper, the effects of test temperatures and time on the impact damage behavior of unidirectional carbon fiber reinforced epoxy resin composites, immersed in pure water, on a pendulum impact tester, was studied...In this paper, the effects of test temperatures and time on the impact damage behavior of unidirectional carbon fiber reinforced epoxy resin composites, immersed in pure water, on a pendulum impact tester, was studied. The results show that immersion in liquids has a significant effect on the impact resistance of the unidirectional composite material. It is obvious that after immersion, the mass of the material increases. The fracture initiation forces as well as the fracture initiation energy decrease as the immersion time lengthens. Moreover, the higher the temperature and the longer the time are, the more the crack propagation energy and the ductility index will be. Immersion makes the fracture mode change from the dominant fiber fracture into dominant delamination. All in all, immersion decreases the impact resistance of the composites and causes the fracture mode to change.展开更多
The effects of the number of layers,the arrangement of carbon fiber(CF)tow and the epoxy resin(ER)matrix on the fire performance of carbon fiber/epoxy composites(CFEC)were studied by a variety of experimental methods....The effects of the number of layers,the arrangement of carbon fiber(CF)tow and the epoxy resin(ER)matrix on the fire performance of carbon fiber/epoxy composites(CFEC)were studied by a variety of experimental methods.The results show that the number of layers of CF tow has influence on the combustion characteristics and fire propagation of the composites.The arrangement of CF tow has influence on flame propagation rate and high temperature mechanicalproperties.The mechanism of the influence of the number of layers of CF tow on the composite is mainly due to the different thermal capacity of ER matrix.The effect of the arrangement of CF tow on the fire performance of the composite is mainly due to the inhibition and obstruction of the tow on the combustion of ER matrix.The influence on the high temperature mechanicalproperties is mainly due to the different arrangement direction of CF tow.The fitting equation of the mechanicalproperties of the samples was obtained.This equation could be used to predict the samples’tensile strength from 25°C to 150℃by comparing with the experimental results.Taking the carbon fiber woven cloth(C)applied in the fuselage material as an example,combining the influencing factors of various parameters in the fire field,some suggestions are put forward combined with the research conclusion.展开更多
Carbon-fiber-reinforced plastics(CFRP)with improved mechanical properties based on modified epoxy binders were investigated in this study.By adding 15 parts by weight(p.b.w.)of copolymer of polysulfone with cardo phth...Carbon-fiber-reinforced plastics(CFRP)with improved mechanical properties based on modified epoxy binders were investigated in this study.By adding 15 parts by weight(p.b.w.)of copolymer of polysulfone with cardo phthalide group(PSFP-70C)to the epoxyanhydride binder,the flexural strength of the epoxy polymer was increased by 60%,the CFRP based on it by 57%,the flexural modulus of the epoxy polymer was increased by 83%,and the composite by 96%.The adhesion strength of the binder to carbon fiber reached a high level at 10 p.b.w.of thermoplastic modifier and increased by 65%compared to the unmodified binder.Scanning electron microscopy(SEM)was used to determine that in epoxyanhydride systems with a polysulfone content of 5–15 p.b.w.,the structure belongs to the"matrix dispersion"type and with a content of 20 p.b.w.to the"interpenetrating phase"type.A heterogeneous structure was also observed using dynamic mechanical analysis.展开更多
It is a good practice to change the site soil properties when dealing with inappropriate soils in geotechnical engineering,referred to as soil improvement.This study investigated the effects of epoxy resin LR202 stabi...It is a good practice to change the site soil properties when dealing with inappropriate soils in geotechnical engineering,referred to as soil improvement.This study investigated the effects of epoxy resin LR202 stabilizer(5 wt%of soil as an optimum percentage)and glass fibers(0 wt%,0.4 wt%and 0.8 wt%of stabilized soil)as reinforcement on silty sand’s durability.For this purpose,the unconfined compressive strength test(12 tests),durability test(12 tests),ultrasonic pulse velocity(UPV)test(48 tests),and standard compactions test(5 tests)were performed.The results of this study showed that the addition of epoxy resin improves the durability of silty sand soil.The stabilized samples containing 5 wt%epoxy resin resisted 12 freeze-thaw cycles,and the sample behavior was enhanced by adding 0.4 wt%and 0.8 wt%fibers to the stabilized samples.Hence,the samples stabilized with epoxy resin exhibited acceptable behavior under freeze-thaw durability cycles.This indicates that epoxy resin stabilizer is appropriate in areas with possible frost and exhibits good behavior.The results of the UPV test showed that it could be used as a non-destructive test to control the durability of epoxy resin-stabilized soils.展开更多
Carbon fiber-reinforced composites(CFRCs)have a wide range of applications in the aerospace,automotive,and energy sectors.A higher specific strength-to-weight ratio is desired in high-performance applications.The fail...Carbon fiber-reinforced composites(CFRCs)have a wide range of applications in the aerospace,automotive,and energy sectors.A higher specific strength-to-weight ratio is desired in high-performance applications.The failure mechanism of CFRCs involves multiscale phenomena,such as failure that can occur at the matrix,fibers,interface,layers,lamina,and laminates.When an impactor hits the CFRCs,the design involves analyzing each of these stages to prevent failure and optimize the properties of CFRCs under various loading conditions.A numerical model was employed to predict the fracture toughness of CFRCs with varying weight fractions and orientations.Finite Element Analysis(FEA)was conducted at the fiber level on a micrometer scale for the CFRCs against an impact loading.Epoxy composite samples at the coupon level were prepared using the hand layup technique with carbon fibers laid at three different angles,i.e.,longitudinal,transverse,and angular orientations.Samples with five different weight percentages of carbon fibers were prepared and investigated.An Izod impact tester was used to fracture the samples and characterize the energy absorption.The fractured surfaces were observed with a scanning electron microscope(SEM).The numerical and experimental results show that crack propagation is inhibited at higher loading fractions at an angular orientation by creating obstacles for the crack to propagate and arresting the dislocation motion.The fractography analysis through a scanning electron microscope exhibits how the angular orientations of the fibers are reoriented after fracture to prevent further crack propagation.展开更多
Rapid dissipation of shear stress and frictional energy in the matrix of polymer-based self-lubricating composites can improve their friction-reduction and anti-wear performance.In this work,regenerated lignocellulose...Rapid dissipation of shear stress and frictional energy in the matrix of polymer-based self-lubricating composites can improve their friction-reduction and anti-wear performance.In this work,regenerated lignocellulose(RLC)with a flexible architecture was used to assist ball-milling to exfoliate bulk molybdenum disulfide(MoS_(2))and introduce it into an epoxy(EP)resin matrix to improve the mechanical and tribological properties of the final products.The abundant functional groups(hydroxyl and aldehyde groups)in RLC undergo an additional reaction with the active hydrogen atoms or epoxy groups in the EP resin,improving the curing performance of the EP matrix and enhancing the flexibility and interfacial strength of the carbon fiber/epoxy(CF/EP)composites.Owing to the simultaneous introduction of rigid MoS_(2) nanosheets and flexible plant-fiber constructs in the EP matrix,external stresses can be transferred from the polymer matrix to the reinforcement fibers more efficiently.The tensile strength and toughness of the final products increased by 42.71% and 53.38%,respectively,and the friction coefficient and wear rate decreased by 37.50% and 30.77%,respectively,over those of the CFs/EP@RLC composites.This approach of using RLC to assist in exfoliating MoS_(2) nanosheets and building a"flexible&rigid"transition framework in an EP matrix provides a valuable reference for improving the interfacial strength and friction properties of polymer-based self-lubricating composites.展开更多
Plastic waste recycling is a focal point in today's sustainable development efforts.Improper disposal can lead to secondary pollution,posing threats to the environment and human health.In this study,we aim to recy...Plastic waste recycling is a focal point in today's sustainable development efforts.Improper disposal can lead to secondary pollution,posing threats to the environment and human health.In this study,we aim to recycle waste epoxy resin and glass fiber-reinforced epoxy resin composites via an electroless plating and a carbonization process,to design high-value-added carbon materials for microwave absorption.By pulverizing solid waste and introducing magnetic metal nanoparticles onto its surface,a composite carbon material capable of excellent microwave absorption performance was successfully developed.Specifically,doping nickel particles into carbon materials derived from glass fiber/epoxy resin achieved a wide effective absorption bandwidth(EAB)of 5.9 GHz with a matching thickness of 1.9 mm,covering nearly the entire Ku band,and achieving a minimum reflection loss(RLmin)of−36 dB simultaneously.The superior absorption performance is attributed to multiple reflections or scattering of electromagnetic waves within the material,as well as conduction and magnetic losses,dipole and interfacial polarization effects.These results demonstrate that through rational design and optimization,waste epoxy and waste glass fiber-reinforced epoxy resin-based composite materials can be effectively recycled into high-performance microwave absorbing materials,offering a straightforward and efficient pathway for waste resource utilization.展开更多
Solar-driven thermo-electric generation(STEG)emerges as a promising solution to mitigate the global en-ergy shortage.However,the practical application of conventional photothermal materials equipped with STEG is limit...Solar-driven thermo-electric generation(STEG)emerges as a promising solution to mitigate the global en-ergy shortage.However,the practical application of conventional photothermal materials equipped with STEG is limited due to low solar thermal conversion efficiency.Herein,we fabricated an epoxy resin(EP)nanocomposite,EP/CCA80,with excellent photo-thermal-electric conversion properties by embedding a vertically aligned aerogel consisting of cellulose nanofibers(CNF)and carboxylated multi-walled carbon nanotubes(CMWCNTs)into a transparent EP matrix.EP/CCA80 composites possessed a broad light ab-sorption range from 200 nm to 2500 nm and excellent photothermal properties.Under illumination of 1.0 kW m^(-2),EP/CCA80 achieved a notable stable temperature of 93.2℃ and a photothermal conversion efficiency of up to 54.35%with only 0.65 wt%CMWCNTs inclusion.Additionally,coupled with thermo-electric(TE)devices,the EP/CCA80 composite facilitated a significant temperature difference and voltage output of up to 25.3℃ and 160.29 mV(1.0 kW m^(-2)),respectively,which could power a small fan to rotate at a speed of 193 min^(-1).Such materials are poised to offer viable solutions for enhancing energy accessibility in remote regions,thereby contributing to the reduction of energy shortages and environ-mental degradation.展开更多
A Shape Memory Polymer Composite(SMPC)is developed by reinforcing an epoxy-based polymer with randomly oriented short glass fibers.Diverging from previous research,which primarily focused on the hot programming of sho...A Shape Memory Polymer Composite(SMPC)is developed by reinforcing an epoxy-based polymer with randomly oriented short glass fibers.Diverging from previous research,which primarily focused on the hot programming of short glass fiber-based SMPCs,this work explores the potential for programming below the glass transition temperature(Tg)for epoxy-based SMPCs.To mitigate the inherent brittleness of the SMPC during deformation,a linear polymer is incorporated,and a temperature between room temperature and Tg is chosen as the deformation temperature to study the shape memory properties.The findings demonstrate an enhancement in shape fixity and recovery stress,alongside a reduction in shape recovery,with the incorporation of short glass fibers.In addition to tensile properties,thermal properties such as thermal conductivity,specific heat capacity,and glass transition temperature are investigated for their dependence on fiber content.Microscopic properties,such as fiber-matrix adhesion and the dispersion of glass fibers,are examined through Scanning Electron Microscope imaging.The fiber length distribution and mean fiber lengths are also measured for different fiber fractions.展开更多
We report a method for increasing the mechanical strength of carbon nanotube(CNT)fibers while enabling the uniform adhesion of cerium oxide(CeO_(2))abrasive particles to them using polyethyleneimine(PEI).Results show ...We report a method for increasing the mechanical strength of carbon nanotube(CNT)fibers while enabling the uniform adhesion of cerium oxide(CeO_(2))abrasive particles to them using polyethyleneimine(PEI).Results show that 5%of PEI increases the tensile strength of CNT fibers by approximately 175%.CeO_(2) particles were uniformly deposited on the reinforced CNT fibers by electrophoretic deposition.A flexible polishing tool was fabricated by weaving the CeO_(2)-CNT fibers into a non-woven fabric substrate.When used to polish potassium dihydrogen phosphate crystals,the tool reduced the surface roughness from 200 to 7.6 nm within 10 min.This approach has potential use for the development of new precision processing tools.展开更多
基金supported by the Science and Technology Development Program of Jilin Province(No.20240101122JC)and(No.20240101143JC)the Key Scientific and Technological Research and Development Projects of Jilin Provincial Science and Technology Department(Grant Number 20230201108GX)。
文摘Insufficient interfacial activity and poor wettability between fibers and matrix are the two main factors limiting the improvement of mechanical properties of Carbon Fiber Reinforced Plastics(CFRP).Owl feathers are known for their unique compact structure;they are not only lightweight but also strong.In this study,an in-depth look at owl feathers was made and it found that owl feathers not only have the macro branches structure between feather shafts and branches but also have fine feather structures on the branches.The presence of these fine feather structures increases the specific surface area of the plume branches and allows neighboring plume branches to hook up with each other,forming an effective mechanical interlocking structure.These structures bring owl feathers excellent mechanical properties.Inspired by the natural structure of owl feathers,a weaving technique and a sizing process were combined to prepare bionic Carbon Fiber(CF)fabrics and then to fabricate the bionic CFRP with structural characteristics similar to owl feathers.To evaluate the effect of the fine feather structure on the mechanical properties of CFRP,a mechanical property study on CFRP with and without the fine feather imitation structure were conducted.The experimental results show that the introduction of the fine feather branch structure enhance the mechanical properties of CFRP significantly.Specifically,the tensile strength of the composites increased by 6.42%and 13.06%and the flexural strength increased by 8.02%and 16.87%in the 0°and 90°sample directions,respectively.These results provide a new design idea for the improvement of the mechanical properties of the CFRP,promoting the application of CFRP in engineering fields,such as automotive transportation,rail transit,aerospace,and construction.
文摘This research explores the water uptake behavior of glass fiber/epoxy composites filled with nanoclay and establishes an Artificial Neural Network(ANN)to predict water uptake percentage fromexperimental parameters.Composite laminates are fabricated with varying glass fiber(40-60 wt.%)and nanoclay(0-4 wt.%)contents.Water absorption is evaluated for 70 days of immersion following ASTM D570-98 standards.The inclusion of nanoclay reduces water uptake by creating a tortuous path for moisture diffusion due to its high aspect ratio and platelet morphology,thereby enhancing the composite’s barrier properties.The ANN model is developed with a 3-4-1 feedforward structure and learned through the Levenberg-Marquardt algorithm with soaking time(7 to 70 days),fiber content(40,50,and 60 wt.%)and nanoclay content(0,2,and 4 wt.%)as input parameters.The model’s output is the water uptake percentage.The model has high prediction efficiency,with a correlation coefficient(R)of 0.998 and a mean squared error of 1.38×10^(-4).Experimental and predicted values are in excellent agreement,ensuring the reliability of the ANN for the simulation of nonlinear water absorption behavior.The results identify the synergistic capability of nanoclay and fiber concentration to reduce water absorption and prove the feasibility of ANN as a substitute for time-consuming testing in composite durability estimation.
文摘In order to explore the effect of artificial accelerated aging temperature on the performance of carbon fiber/epoxy resin composites,we used artificial seawater as the aging medium,designed the aging environment of seawater at different temperatures under normal pressure,and studied the aging behavior of carbon fiber/epoxy composites.The infrared spectroscopy results show that,with the increase of aging temperature,the degree of hydrolysis of the composite is greater.At the same time,after 250 days of aging of artificial seawater at regular temperature,40 and 60 ℃,the moisture absorption rates of composite materials were 0.45%,0.63%,and 1.05%,and the retention rates of interlaminar shear strength were 91%,78%,and 62%,respectively.It is shown that the temperature of the aging environment has a significant impact on the hygroscopic behavior and mechanical properties of the composite,that is,the higher the temperature,the faster the moisture absorption of the composite,and the faster the decay of the mechanical properties of the composite.
基金the Innovation Funds of China-National Engineering and Research Center for Commercial Aircraft Manufacturing (SAMC12-JS-15-015) for financial support
文摘Microwave processing was used to cure the carbon fiber/epoxy composites and designed for improving the compressive strength of the materials. By controlling the power of microwave heating, vacuum bagged laminates were fabricated under one atmosphere pressure without arcing. The physical and mechanical properties of composites produced through vacuum bagging using microwave and thermal curing were compared and the multistep （2-step or 3-step） microwave curing process for improved compressive properties was established. The results indicated that microwave cured samples had somewhat differentiated molecular structure and showed slightly higher glass transition temperature. The 2-step process was found to be more conducive to the enhancement of the compressive strength than the 3-step process. A 39% cure cycle time reduction and a 22% compressive strength increment were achieved for the composites manufactured with microwave radiation. The improvement in specific compressive strength was attributed to better interracial bonding between resin matrix and the fibers, which was also demonstrated via scanning electron microscopy analysis.
基金National Key Laboratory Foundation for Remanufacting(9140C85040209OC8510)
文摘Microwave irradiation was used to reduce the curing time of carbon fiber/epoxy resin composite material.The properties of carbon fiber/epoxy resin composite material under microwave curing were investigated by thermogravimetry(TG),dynamic mechanical analysis(DMA),impact strength test and scanning electron microscope(SEM).The results show that composite materials patch have high thermal stability after microwave curing.The initial degradation temperature is 330.9℃,the maximum thermal decomposition rate is at 368.1℃.When the layer of composite materials patchis 4 layers,the dynamic mechanical properties are the best after microwave curing.The initial storage modulus is 43.2 GPa,increased 28.3 GPa and 27.1 GPa than 3 layers and 5 layers,the glass transition temperature(Tg)is 67.48℃,increased about 12 ℃than 3 layers and 5 layers.Microwave curing can significantly improve the infiltration capacity of epoxy resin,enhance interfacial bonding,and increase the impact strength of composite patch.Under microwave curing,the impact strength of 3,4,5-layers composite material patches increases 35.9%,6.4% and 15.1%,respectively than heating curing.The SEM analysis of impact fracture surface shows that microwave curing can improve the interface of carbon fiber and epoxy resin.
基金supported by the National Natural Science Foundation of China(Nos.52175474 and 52275498)。
文摘To meet the requirements of spacecraft for the thermal conductivity of resins and solve the problem of low thermal conduction efficiency when 3D printing complex parts,we propose a new type of continuous mesophase-pitch-based carbon fiber/thermoplastic polyurethane/epoxy(CMPCF/TPU/epoxy)composite filament and its preparation process in this study.The composite filament is based on the high thermal conductivity of CMPCF,the high elasticity of TPU,and the high-temperature resistance of epoxy.The tensile strength and thermal conductivity of the CMPCF/TPU/epoxy composite filament were tested.The CMPCF/TPU/epoxy composites are formed by 3D printing technology,and the composite filament is laid according to the direction of heat conduction so that the printed part can meet the needs of directional heat conduction.The experimental results show that the thermal conductivity of the printed sample is 40.549 W/(m·K),which is 160 times that of pure epoxy resin(0.254 W/(m·K)).It is also approximately 13 times better than that of polyacrylonitrile carbon fiber/epoxy(PAN-CF/epoxy)composites.This study breaks through the technical bottleneck of poor printability of CMPCF.It provides a new method for achieving directional thermal conductivity printing,which is important for the development of complex high-performance thermal conductivity products.
文摘In this study,the influence of sodium hydroxide(NaOH)treatment and microwave treatment of coir fibers on the mechanical and physical properties of pressed coir fiber/epoxy composite were evaluated.The composite was fabricated with a hand lay-up method with compression molding.Before composite fabrication,pressed coir fiber was treated with NaOH and microwave treatments.Mechanical testing(tensile,flexural,and impact testing)of the composite was conducted.Then,water absorption and thickness swelling testing are also performed.The fractured composite surface morphology after the tensile test was analyzed by scanning electronic microscopy(SEM).The results revealed that tensile,flexural,and impact strengths of composite tend to increase after NaOH treatment of coir fiber followed by microwave treatment for 10 and 20 minutes of exposure time compared to untreated fiber.However,for NaOH treatment,the tensile,flexural and,impact strengths of composite reduce.The reducing of the tensile strength of the composite is due to the agglomeration fiber occurred,which is displayed in the SEM micrograph.Furthermore,microwave treatment of fiber for 10 minutes and NaOH treatment followed by microwave treatment for 20 minutes of exposure time decreases the water absorption and thickness swelling of the composite.
基金supported by the National Natural Science Foundation of China (No.32171882)the Science and Technology Innovation Program of Hunan Province of China (2021RC4062)Scientific Research Project of Hunan Provincial Department of Education (20K143).
文摘The residual resources of ramie fiber-based textile products were used as raw materials.Ramie fiber felt(RF)was modified by NaClO_(2) aqueous solution and then impregnated with water-based epoxy resin(WER).RF/WER transparent composite materials were prepared by lamination hot pressing process.The composite materials’color difference,transmittance,haze,density,water absorption,and mechanical properties were determined to assess the effects of NaClO_(2) treatment and the number of ramie fiber layers on the properties of the prepared composites.The results showed significantly improved optical and mechanical properties of the RF/WER transparent composites after NaClO_(2) treatment.With the increase of ramie fiber layers,the composites’whiteness,transmittance,and water absorption decreased while the haze increased.For material with three layers,the optical transmittance in the visible light region was 82%,and the haze was 96%,indicating the material has both high transmittance and high haze characteristics.The tensile strength increases with the increase of the number of layers,and the tensile strength of the composite with six layers is 243 MPa.This study broadens the scope of application of ramie fiber as a new option for home decoration materials.
文摘Microwave processing has great potential for improving composite manufacturing such as reduction of curing time, energy requirements and operational costs. In this paper, the effects of microwave irradiation for resin-curing of carbon fiber/epoxy resin composite that was composed of discontinuous carbon fibers of 130 μm or 3 mm were investigated. The mechanical properties of carbon fiber/epoxy resin composite cured by microwave irradiation for 20 min at 120°C were similar to ones of the sample prepared by conventional oven for 180 min at 120°C. Microwavecured carbon fiber/epoxy resin composite had higher glass transition temperature than the one prepared by conventional oven. The relation between curing time and flexural modulus indicated that the curing velocity of microwave-irradiated carbon fiber/epoxy resin composite was 9 times faster than the one prepared by conventional oven. Furthermore, activation energies for resincuring reaction on microwave and conventional-cured carbon fiber/epoxy resin composite were estimated. The resin-curing reaction in carbon fiber/epoxy resin composite was promoted by microwave irradiation.
基金the National Natural Science Foundation of China(Nos.51803102 and 51903129)Natural Science Foundation of Shandong Province(Nos.201807070028 and 201808220020)+2 种基金the Source Innovation Project of Qingdao(No.19-6-2-75-cg)Industry and Education Cooperation Program of The Ministry of Education(Nos.201802201002,201901078008 and 201802230009)Opening Project of Shanxi Province Key Laboratory of Functional Nanocomposites,North University of China(No.NFCM202001).
文摘In order to enhance the interfacial adhesion of carbon fiber(CF)and polymer matrix,a multiscale gradient modulus intermediate layer with rigid-flexible(GO-PA)hierarchical structure was designed and fabricated between CFs and matrix by a facile and businesslike strategy.The polarity,roughness and wettability of CFs surface as well as the thickness of intermediate layer in composite have been significantly increased after rigid-flexible hierarchical structure was constructed.The IFSS,ILSS,compression and impact toughness manifested that the hierarchical structure could bring about a fantastic improvement(76.8%,46.4%,40.7%and 37.8%)for the interfacial and mechanical properties than other previous reports.Consequently,the establishment of CF surface with gradient modulus rigid-flexible hierarchical structure via regulation of nanoparticles and polymer array would open a new,viable and promising route to obtaining high-performance composites.
基金aeronautical Science Foundation of China(04A51011)
文摘In this paper, the effects of test temperatures and time on the impact damage behavior of unidirectional carbon fiber reinforced epoxy resin composites, immersed in pure water, on a pendulum impact tester, was studied. The results show that immersion in liquids has a significant effect on the impact resistance of the unidirectional composite material. It is obvious that after immersion, the mass of the material increases. The fracture initiation forces as well as the fracture initiation energy decrease as the immersion time lengthens. Moreover, the higher the temperature and the longer the time are, the more the crack propagation energy and the ductility index will be. Immersion makes the fracture mode change from the dominant fiber fracture into dominant delamination. All in all, immersion decreases the impact resistance of the composites and causes the fracture mode to change.
基金sponsored by Project 51874313 supported by National Natural Science Foundation of China.
文摘The effects of the number of layers,the arrangement of carbon fiber(CF)tow and the epoxy resin(ER)matrix on the fire performance of carbon fiber/epoxy composites(CFEC)were studied by a variety of experimental methods.The results show that the number of layers of CF tow has influence on the combustion characteristics and fire propagation of the composites.The arrangement of CF tow has influence on flame propagation rate and high temperature mechanicalproperties.The mechanism of the influence of the number of layers of CF tow on the composite is mainly due to the different thermal capacity of ER matrix.The effect of the arrangement of CF tow on the fire performance of the composite is mainly due to the inhibition and obstruction of the tow on the combustion of ER matrix.The influence on the high temperature mechanicalproperties is mainly due to the different arrangement direction of CF tow.The fitting equation of the mechanicalproperties of the samples was obtained.This equation could be used to predict the samples’tensile strength from 25°C to 150℃by comparing with the experimental results.Taking the carbon fiber woven cloth(C)applied in the fuselage material as an example,combining the influencing factors of various parameters in the fire field,some suggestions are put forward combined with the research conclusion.
基金financially supported by the Ministry of Science and Higher Education of the Russian Federation。
文摘Carbon-fiber-reinforced plastics(CFRP)with improved mechanical properties based on modified epoxy binders were investigated in this study.By adding 15 parts by weight(p.b.w.)of copolymer of polysulfone with cardo phthalide group(PSFP-70C)to the epoxyanhydride binder,the flexural strength of the epoxy polymer was increased by 60%,the CFRP based on it by 57%,the flexural modulus of the epoxy polymer was increased by 83%,and the composite by 96%.The adhesion strength of the binder to carbon fiber reached a high level at 10 p.b.w.of thermoplastic modifier and increased by 65%compared to the unmodified binder.Scanning electron microscopy(SEM)was used to determine that in epoxyanhydride systems with a polysulfone content of 5–15 p.b.w.,the structure belongs to the"matrix dispersion"type and with a content of 20 p.b.w.to the"interpenetrating phase"type.A heterogeneous structure was also observed using dynamic mechanical analysis.
文摘It is a good practice to change the site soil properties when dealing with inappropriate soils in geotechnical engineering,referred to as soil improvement.This study investigated the effects of epoxy resin LR202 stabilizer(5 wt%of soil as an optimum percentage)and glass fibers(0 wt%,0.4 wt%and 0.8 wt%of stabilized soil)as reinforcement on silty sand’s durability.For this purpose,the unconfined compressive strength test(12 tests),durability test(12 tests),ultrasonic pulse velocity(UPV)test(48 tests),and standard compactions test(5 tests)were performed.The results of this study showed that the addition of epoxy resin improves the durability of silty sand soil.The stabilized samples containing 5 wt%epoxy resin resisted 12 freeze-thaw cycles,and the sample behavior was enhanced by adding 0.4 wt%and 0.8 wt%fibers to the stabilized samples.Hence,the samples stabilized with epoxy resin exhibited acceptable behavior under freeze-thaw durability cycles.This indicates that epoxy resin stabilizer is appropriate in areas with possible frost and exhibits good behavior.The results of the UPV test showed that it could be used as a non-destructive test to control the durability of epoxy resin-stabilized soils.
基金supported by the University of Texas(UT)system STARs grant,Semester Undergraduate Research Experience(SURE)program at the College of Engineering at the University of Texas Permian Basin(UTPB)EM-STEP(Engineering Minority Student Engagement Project)at UTPB College of Engineering,funded by Department of Education.
文摘Carbon fiber-reinforced composites(CFRCs)have a wide range of applications in the aerospace,automotive,and energy sectors.A higher specific strength-to-weight ratio is desired in high-performance applications.The failure mechanism of CFRCs involves multiscale phenomena,such as failure that can occur at the matrix,fibers,interface,layers,lamina,and laminates.When an impactor hits the CFRCs,the design involves analyzing each of these stages to prevent failure and optimize the properties of CFRCs under various loading conditions.A numerical model was employed to predict the fracture toughness of CFRCs with varying weight fractions and orientations.Finite Element Analysis(FEA)was conducted at the fiber level on a micrometer scale for the CFRCs against an impact loading.Epoxy composite samples at the coupon level were prepared using the hand layup technique with carbon fibers laid at three different angles,i.e.,longitudinal,transverse,and angular orientations.Samples with five different weight percentages of carbon fibers were prepared and investigated.An Izod impact tester was used to fracture the samples and characterize the energy absorption.The fractured surfaces were observed with a scanning electron microscope(SEM).The numerical and experimental results show that crack propagation is inhibited at higher loading fractions at an angular orientation by creating obstacles for the crack to propagate and arresting the dislocation motion.The fractography analysis through a scanning electron microscope exhibits how the angular orientations of the fibers are reoriented after fracture to prevent further crack propagation.
基金supported by the National Key R&D Program of China(No.2022YFB3809000)the National Natural Science Foundation of China(No.52473334)+1 种基金the Youth Innovation Team of Shaanxi Universities(No.24JP027)the Key Research and Development Plan of Shaanxi Province(No.2023-YBGY-429).
文摘Rapid dissipation of shear stress and frictional energy in the matrix of polymer-based self-lubricating composites can improve their friction-reduction and anti-wear performance.In this work,regenerated lignocellulose(RLC)with a flexible architecture was used to assist ball-milling to exfoliate bulk molybdenum disulfide(MoS_(2))and introduce it into an epoxy(EP)resin matrix to improve the mechanical and tribological properties of the final products.The abundant functional groups(hydroxyl and aldehyde groups)in RLC undergo an additional reaction with the active hydrogen atoms or epoxy groups in the EP resin,improving the curing performance of the EP matrix and enhancing the flexibility and interfacial strength of the carbon fiber/epoxy(CF/EP)composites.Owing to the simultaneous introduction of rigid MoS_(2) nanosheets and flexible plant-fiber constructs in the EP matrix,external stresses can be transferred from the polymer matrix to the reinforcement fibers more efficiently.The tensile strength and toughness of the final products increased by 42.71% and 53.38%,respectively,and the friction coefficient and wear rate decreased by 37.50% and 30.77%,respectively,over those of the CFs/EP@RLC composites.This approach of using RLC to assist in exfoliating MoS_(2) nanosheets and building a"flexible&rigid"transition framework in an EP matrix provides a valuable reference for improving the interfacial strength and friction properties of polymer-based self-lubricating composites.
基金supported by the National Natural Science Foundation of China(No.52173264)the Natural Science Foundation Project of Chongqing(No.cstc2024ycjh-bgzxm0005)+1 种基金the Fundamental Research Funds for the Central Universities(No.SWU-XDJH202314)The authors thanks Dr.Xi Tang in Southwest University for the technical support in the use of the vector network analyzer.
文摘Plastic waste recycling is a focal point in today's sustainable development efforts.Improper disposal can lead to secondary pollution,posing threats to the environment and human health.In this study,we aim to recycle waste epoxy resin and glass fiber-reinforced epoxy resin composites via an electroless plating and a carbonization process,to design high-value-added carbon materials for microwave absorption.By pulverizing solid waste and introducing magnetic metal nanoparticles onto its surface,a composite carbon material capable of excellent microwave absorption performance was successfully developed.Specifically,doping nickel particles into carbon materials derived from glass fiber/epoxy resin achieved a wide effective absorption bandwidth(EAB)of 5.9 GHz with a matching thickness of 1.9 mm,covering nearly the entire Ku band,and achieving a minimum reflection loss(RLmin)of−36 dB simultaneously.The superior absorption performance is attributed to multiple reflections or scattering of electromagnetic waves within the material,as well as conduction and magnetic losses,dipole and interfacial polarization effects.These results demonstrate that through rational design and optimization,waste epoxy and waste glass fiber-reinforced epoxy resin-based composite materials can be effectively recycled into high-performance microwave absorbing materials,offering a straightforward and efficient pathway for waste resource utilization.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52073043 and 52173069)the Fundamental Research Funds for the Central Universities(Grant No.2572022CG03)+1 种基金the Key Research and Development Projects in Heilongjiang Province(Grant No.GZ20210089)the Australian Research Council(Grant Nos.LP220100278,DP240102628,and DP240102728).
文摘Solar-driven thermo-electric generation(STEG)emerges as a promising solution to mitigate the global en-ergy shortage.However,the practical application of conventional photothermal materials equipped with STEG is limited due to low solar thermal conversion efficiency.Herein,we fabricated an epoxy resin(EP)nanocomposite,EP/CCA80,with excellent photo-thermal-electric conversion properties by embedding a vertically aligned aerogel consisting of cellulose nanofibers(CNF)and carboxylated multi-walled carbon nanotubes(CMWCNTs)into a transparent EP matrix.EP/CCA80 composites possessed a broad light ab-sorption range from 200 nm to 2500 nm and excellent photothermal properties.Under illumination of 1.0 kW m^(-2),EP/CCA80 achieved a notable stable temperature of 93.2℃ and a photothermal conversion efficiency of up to 54.35%with only 0.65 wt%CMWCNTs inclusion.Additionally,coupled with thermo-electric(TE)devices,the EP/CCA80 composite facilitated a significant temperature difference and voltage output of up to 25.3℃ and 160.29 mV(1.0 kW m^(-2)),respectively,which could power a small fan to rotate at a speed of 193 min^(-1).Such materials are poised to offer viable solutions for enhancing energy accessibility in remote regions,thereby contributing to the reduction of energy shortages and environ-mental degradation.
文摘A Shape Memory Polymer Composite(SMPC)is developed by reinforcing an epoxy-based polymer with randomly oriented short glass fibers.Diverging from previous research,which primarily focused on the hot programming of short glass fiber-based SMPCs,this work explores the potential for programming below the glass transition temperature(Tg)for epoxy-based SMPCs.To mitigate the inherent brittleness of the SMPC during deformation,a linear polymer is incorporated,and a temperature between room temperature and Tg is chosen as the deformation temperature to study the shape memory properties.The findings demonstrate an enhancement in shape fixity and recovery stress,alongside a reduction in shape recovery,with the incorporation of short glass fibers.In addition to tensile properties,thermal properties such as thermal conductivity,specific heat capacity,and glass transition temperature are investigated for their dependence on fiber content.Microscopic properties,such as fiber-matrix adhesion and the dispersion of glass fibers,are examined through Scanning Electron Microscope imaging.The fiber length distribution and mean fiber lengths are also measured for different fiber fractions.
文摘We report a method for increasing the mechanical strength of carbon nanotube(CNT)fibers while enabling the uniform adhesion of cerium oxide(CeO_(2))abrasive particles to them using polyethyleneimine(PEI).Results show that 5%of PEI increases the tensile strength of CNT fibers by approximately 175%.CeO_(2) particles were uniformly deposited on the reinforced CNT fibers by electrophoretic deposition.A flexible polishing tool was fabricated by weaving the CeO_(2)-CNT fibers into a non-woven fabric substrate.When used to polish potassium dihydrogen phosphate crystals,the tool reduced the surface roughness from 200 to 7.6 nm within 10 min.This approach has potential use for the development of new precision processing tools.
