Geometry parameters of optical fiber are crucial in evaluating the quality of the optical fiber.Near⁃field light distribution method is recommended in GB15972.20-2008 for the measurement of geometry parameters.To dist...Geometry parameters of optical fiber are crucial in evaluating the quality of the optical fiber.Near⁃field light distribution method is recommended in GB15972.20-2008 for the measurement of geometry parameters.To distinguish the boundary between fiber core and cladding,it is necessary to illuminate the fiber.The end face of the core is a bright spot with unclear edge,so the true edge of the core and the cladding cannot be accurately judged.A method is proposed in this paper to measure the geometry parameters of optical fiber by Bessel function fitting.Theoretically,the solution to the electromagnetic vector of mode field satisfies Bessel function,and the boundary between the core and the cladding can be precisely extracted by Bessel function fitting.Edges of the fiber were fitted by elliptical curves,and the geometry parameters of the fibers could be calculated.Results show that the maximum deviations of the diameters and the average differences of the fibers were decreased under normal and abnormal conditions respectively.The proposed method is an efficient way to obtain edge data and can improve the accuracy and stability of geometry parameters of optical fibers.展开更多
The aim of the paper is to discover the general creep mechanisms for the short fiber reinforcement matrix composites (MMCs) under uniaxial stress states and to build a relationship between the macroscopic steady creep...The aim of the paper is to discover the general creep mechanisms for the short fiber reinforcement matrix composites (MMCs) under uniaxial stress states and to build a relationship between the macroscopic steady creep behavior and the material micro geometric parameters. The unit cell models were used to calculate the macroscopic creep behavior with different micro geometric parameters of fibers on different loading directions. The influence of the geometric parameters of the fibers and loading directions on the macroscopic creep behavior had been obtained, and described quantitatively. The matrix/fiber interface had been considered by a third layer, matrix/fiber interlayer, in the unit cells with different creep properties and thickness. Based on the numerical results of the unit cell models, a statistic model had been presented for the plane randomly-distributed-fiber MMCs. The fiber breakage had been taken into account in the statistic model for it starts experimentally early in the creep life. With the distribution of the geometric parameters of the fibers, the results of the statistic model agree well with the experiments. With the statistic model, the influence of the geometric parameters and the breakage of the fibers as well as the properties and thickness of, the interlayer on the macroscopic steady creep rate have been discussed.展开更多
Photonic crystal fibers （PCFs） with a stepped raised-core profile and one layer equally spaced holes in the cladding are analyzed. Using effective index method and considering a raised step refractive index differen...Photonic crystal fibers （PCFs） with a stepped raised-core profile and one layer equally spaced holes in the cladding are analyzed. Using effective index method and considering a raised step refractive index difference between the index of the core and the effective index of the cladding, we improve the characteristic parameters such as numerical aperture and V-parameter, and reduce its bending loss to about one tenth of a conventional PCF. Implementing such a structure in PCFs may be one step forward to achieve low loss PCFs for communication applications.展开更多
We studied the effect of growth on wood anatomical dimensions and specific gravity of seed-raised plantation wood of Dalbergia sissoo with twelve trees of different diameters and similar ages. Fiber length ranged from...We studied the effect of growth on wood anatomical dimensions and specific gravity of seed-raised plantation wood of Dalbergia sissoo with twelve trees of different diameters and similar ages. Fiber length ranged from 925 to1,287 lm, fiber-diameter was 19–23 lm, wall thickness was4.2–5.4 lm, vessel-element-length was 152–188 lm, vesselelement-diameter was 152–200 lm, and specific gravity was0.59–0.72. Growth parameters including tree height, diameter at breast height, net primary productivity and net ecosystem productivity were significantly and positively correlated.Growth parameters showed non-significant positive relationships with fiber-length, fiber diameter, wall thickness, vessel element length, and vessel element diameter. The trend of wood traits increased with growth. Specific gravity showed non-significant negative relationships with growth parameters. Although the growth rate had varied relationships with wood properties, as reported by various workers, the wood element dimensions showed no significant relationship with growth parameters and there was little effect of growth rate on wood traits in seed-raised plantation of D. sissoo.展开更多
We investigate two configurations of Raman fiber amplifier in the 1530-1570 nm region. The gain spectrum variation is decreased from 8.31 dB to 2.48 dB when appropriately adjust the individual two pumps and optical fi...We investigate two configurations of Raman fiber amplifier in the 1530-1570 nm region. The gain spectrum variation is decreased from 8.31 dB to 2.48 dB when appropriately adjust the individual two pumps and optical fiber.展开更多
基金Sponsored by the National Science Foundation for Young Scholars of China(Grant No.61605114).
文摘Geometry parameters of optical fiber are crucial in evaluating the quality of the optical fiber.Near⁃field light distribution method is recommended in GB15972.20-2008 for the measurement of geometry parameters.To distinguish the boundary between fiber core and cladding,it is necessary to illuminate the fiber.The end face of the core is a bright spot with unclear edge,so the true edge of the core and the cladding cannot be accurately judged.A method is proposed in this paper to measure the geometry parameters of optical fiber by Bessel function fitting.Theoretically,the solution to the electromagnetic vector of mode field satisfies Bessel function,and the boundary between the core and the cladding can be precisely extracted by Bessel function fitting.Edges of the fiber were fitted by elliptical curves,and the geometry parameters of the fibers could be calculated.Results show that the maximum deviations of the diameters and the average differences of the fibers were decreased under normal and abnormal conditions respectively.The proposed method is an efficient way to obtain edge data and can improve the accuracy and stability of geometry parameters of optical fibers.
文摘The aim of the paper is to discover the general creep mechanisms for the short fiber reinforcement matrix composites (MMCs) under uniaxial stress states and to build a relationship between the macroscopic steady creep behavior and the material micro geometric parameters. The unit cell models were used to calculate the macroscopic creep behavior with different micro geometric parameters of fibers on different loading directions. The influence of the geometric parameters of the fibers and loading directions on the macroscopic creep behavior had been obtained, and described quantitatively. The matrix/fiber interface had been considered by a third layer, matrix/fiber interlayer, in the unit cells with different creep properties and thickness. Based on the numerical results of the unit cell models, a statistic model had been presented for the plane randomly-distributed-fiber MMCs. The fiber breakage had been taken into account in the statistic model for it starts experimentally early in the creep life. With the distribution of the geometric parameters of the fibers, the results of the statistic model agree well with the experiments. With the statistic model, the influence of the geometric parameters and the breakage of the fibers as well as the properties and thickness of, the interlayer on the macroscopic steady creep rate have been discussed.
文摘Photonic crystal fibers （PCFs） with a stepped raised-core profile and one layer equally spaced holes in the cladding are analyzed. Using effective index method and considering a raised step refractive index difference between the index of the core and the effective index of the cladding, we improve the characteristic parameters such as numerical aperture and V-parameter, and reduce its bending loss to about one tenth of a conventional PCF. Implementing such a structure in PCFs may be one step forward to achieve low loss PCFs for communication applications.
文摘We studied the effect of growth on wood anatomical dimensions and specific gravity of seed-raised plantation wood of Dalbergia sissoo with twelve trees of different diameters and similar ages. Fiber length ranged from 925 to1,287 lm, fiber-diameter was 19–23 lm, wall thickness was4.2–5.4 lm, vessel-element-length was 152–188 lm, vesselelement-diameter was 152–200 lm, and specific gravity was0.59–0.72. Growth parameters including tree height, diameter at breast height, net primary productivity and net ecosystem productivity were significantly and positively correlated.Growth parameters showed non-significant positive relationships with fiber-length, fiber diameter, wall thickness, vessel element length, and vessel element diameter. The trend of wood traits increased with growth. Specific gravity showed non-significant negative relationships with growth parameters. Although the growth rate had varied relationships with wood properties, as reported by various workers, the wood element dimensions showed no significant relationship with growth parameters and there was little effect of growth rate on wood traits in seed-raised plantation of D. sissoo.
文摘We investigate two configurations of Raman fiber amplifier in the 1530-1570 nm region. The gain spectrum variation is decreased from 8.31 dB to 2.48 dB when appropriately adjust the individual two pumps and optical fiber.
