In today's era of continuous advancement in materials science,the properties of materials are constantly being enhanced,and their application fields are also expanding continuously.SAF(Super Absorbent Fiber),one s...In today's era of continuous advancement in materials science,the properties of materials are constantly being enhanced,and their application fields are also expanding continuously.SAF(Super Absorbent Fiber),one such material,stands out.Compared to traditional SAP(Super Absorbent Polymer),SAF boasts a unique fibrous form and exceptional performance,presenting broad application prospects.展开更多
Use of environmentally friendly approaches with the purpose of strengthening soil layers along with finding correlations between the mechanical characteristics of fiber-reinforced soils such as indirect tensile streng...Use of environmentally friendly approaches with the purpose of strengthening soil layers along with finding correlations between the mechanical characteristics of fiber-reinforced soils such as indirect tensile strength(ITS)and California bearing ratio(CBR)and as well as the evaluation of shear strength parameters obtained from the triaxial test would be very effective at geotechnical construction sites.This research was aimed at investigating the influence of natural fibers as sustainable ones including basalt(BS)and bagasse(BG)as well as synthetic polyester(PET)fibers on the strength behavior of clayey soil.To this end,the effects of various fiber contents(0.5%,1%and 2%)and lengths(2.5 mm,5 mm and 7.5 mm)were experimentally evaluated.By conducting ITS and CBR tests,it was found that increasing fiber content and length had a significant influence on CBR and ITS values.Moreover,2%of 7.5 mm-long fibers led to the largest values of CBR and ITS.The CBR values of soil reinforced with PET,BS,and BG fibers were determined as 19.17%,15.43%and 13.16%,respectively.The ITS values of specimens reinforced with PET,BS,and BG fibers were reported as 48.57 kPa,60.7 kPa and 47.48 kPa,respectively.The results of the triaxial compression test revealed that with the addition of BS fibers,the internal friction angle increased by about 100%,and with the addition of PET fibers,the cohesion increased by about 70%.Moreover,scanning electron microscope(SEM)analysis was employed to confirm the findings.The relationship between CBR and ITS values,obtained via statistical analysis and used for the optimum design of road pavement layers,demonstrated that these parameters had high correlation coefficients.The outcomes of multiple linear regression and sensitivity analysis also confirmed that the fiber content had a greater effect on CBR and ITS values than fiber length.展开更多
A new and practical fluorescence temperature detecting system based on fluorescence intensity ratio was proposed . The background theory of fluorescence intensity-ratio method was presented simply. And the characters ...A new and practical fluorescence temperature detecting system based on fluorescence intensity ratio was proposed . The background theory of fluorescence intensity-ratio method was presented simply. And the characters of rare earth doped samples were detailed. The erbium-doped fiber was chosen as the sensing element. The energy levels of 2H11/2 and 4S3/2 are responsible for the emission of radiation at approximately 530 and 555 nm. The erbium-doped (960 ppm) fiber of length 20 cm and core diameter 3.2μm was used as the sensing part. A silica photodiode transfers the fluorescence signal to electric signal, then the ratio of the average of the two different signals was calculated by the computer and the temperature was obtained. The ratio R of the intensity resulting from the transition between the two levels varies proportionly with temperature interval from 293 K to 373 K. The sensitivity of the sensor is approximately 0.05 K-1.展开更多
The effect of chemical modification, reinforcement structure and fiber weight ratio on the flexural proprieties of Luffa-polyester composites was studied. A unsaturated polyester matrix reinforced with a mat of Luffa ...The effect of chemical modification, reinforcement structure and fiber weight ratio on the flexural proprieties of Luffa-polyester composites was studied. A unsaturated polyester matrix reinforced with a mat of Luffa external wall fibers (ComLEMat), a short Luffa external wall fibers(ComLEBC) and a short Luffa core fi-bers (ComLCBC) was fabricated under various conditions of fibers treatments (combined process, acetylat-ing and cyanoethylating) and fiber weight ratio. It resorts that acetylating and cyanoethylating enhance the flexural strength and the flexural modulus. The fiber weight ratio influenced the flexural properties of com-posites. Indeed, a maximum value of strength and strain is observed over a 10% fiber weight ratio. The uses of various reinforcement structures were investigated. The enhancement of elongation at break and the strain values of the composite reinforced by natural mat was proved.展开更多
A metal-assisted method is proposed for the evaluation of gases’molecular abundance ratio in fiber-optic laser-induced breakdown spectroscopy(FO-LIBS).This method can reduce the laser ablation energy and make gas com...A metal-assisted method is proposed for the evaluation of gases’molecular abundance ratio in fiber-optic laser-induced breakdown spectroscopy(FO-LIBS).This method can reduce the laser ablation energy and make gas composition identification possible.The principle comes from the collision between the detected gases and the plasma produced by the laser ablation of the metal substrate.The interparticle collision in the plasma plume leads to gas molecules dissociating and sparking,which can be used to determine the gas composition.The quantitative relationship between spectral line intensity and molecular abundance ratio was developed over a large molecular abundance ratio range.The influence of laser ablation energy and substrate material on gas quantitative calibration measurement is also analyzed.The proposed metal-assisted method makes the measurement of gases’molecular abundance ratios possible with an FO-LIBS system.展开更多
The chiral materials were prepared by using the carbon fiber helices as chiral inclusions, and the composite of Fe3O4 and polyaniline as matrix. The electromagnetic properties, including the rotation angles, the axial...The chiral materials were prepared by using the carbon fiber helices as chiral inclusions, and the composite of Fe3O4 and polyaniline as matrix. The electromagnetic properties, including the rotation angles, the axial ratios and the complex chirality parameters, were measured by using a circular waveguide method in the 8.5-11.0 GHz frequency range. The dependence of these electromagnetic properties on the frequency and the concentration of the Fe3O4 in the composite matrix were analyzed. The results show that an appropriate concentration of Fe3O4 in the matrix is useful in improving the electromagnetic properties of the chiral material.展开更多
In this paper, two methods were developed to assess the blending ratio of two-componentfiber bundles. They were the peak-height method and the slope method. The relationship be-tween blending ratio and testing data wa...In this paper, two methods were developed to assess the blending ratio of two-componentfiber bundles. They were the peak-height method and the slope method. The relationship be-tween blending ratio and testing data was analysed, and the regression curves were obtained bystepwise regression method. It was pointed out that the testing errors of both methods were lessthan two percent. The validities of both methods were verified by experiments, All calculationsof both methods were completed by computer. The blending ratio was ascertained from the test-ing data of bundle fiber strength tester which was made by the authors themselves.展开更多
To adapt to the change of aquaculture workshop site,optimize the shape of aquaculture tanks and improve the utilization rate of breeding space,it is necessary to determine the appropriate length width ratio parameters...To adapt to the change of aquaculture workshop site,optimize the shape of aquaculture tanks and improve the utilization rate of breeding space,it is necessary to determine the appropriate length width ratio parameters of aquaculture tanks.In this paper,computational fluid dynamics(CFD)technology is adopted to study the flow field performance of aquaculture tanks with different L/B ratios(L:the length;B:the width,of aquaculture tank)and different jet direction conditions(lengthways jet and widthways jet).A three-dimensional numerical calculation model of turbulence in rounded rectangle aquaculture tanks in dual-diagonal-inlet layout was established.Jet directions are arranged lengthways and widthways,and the water flow velocity,resistance coefficient change,vorticity,etc.are analyzed under two working conditions.Results show that the flow field performance in aquaculture tank decreases with the increase of the L/B ratio.The flow field performed well when L/B was 1.0-1.3,sharply dropped at 1.4-1.6,and poor at 1.7-1.9.The results provided a theoretical basis for the design and optimization in flow field performance of the industrialized circulating aquaculture tanks.展开更多
The daily intake of total dietary fiber (TDF) was evaluated from data of the National Nutrition Survey (NNS) in Japan for 41 years since 1947. An interrelationship between the nutrient intake, including TDF, and the m...The daily intake of total dietary fiber (TDF) was evaluated from data of the National Nutrition Survey (NNS) in Japan for 41 years since 1947. An interrelationship between the nutrient intake, including TDF, and the mortality from colon cancer in Japanese people was calculated by a simple correlation coefficient and time-series correlation coeffcient.TDF intake per capita decreased rapidly from 27.4 g in 1947 to 15.8 g in 1963, and subsequently decreased by a lesser rate to 15.3 g in 1987. Fat intake increased rapidly from 18.0 g in 1950 to 56.6 g in 1987.The age-adjusted mortality from colon cancer shows a significant positive correlation with both the intakes of animal protein and of total fat, and the fat energy ratio. A time-series analysis indicates that the mortality from colon cancer was negatively correlated with TDF with a 15-27 year delay, the maximum correlation existing with a 23-year lag (r = -0.947). The TDF intake was less than 17.9 g in 1965. At the same time, the mortality from colon cancer increased rapidly. A fat/TDF ratio above 3.0 resulted in a rapid increase in colon cancer mortality.The non-adjusted mortality from colon cancer has much the same interrelationship with TDF and fat intake as the adjusted figures. It is suggested that the cause of the increased mortality from colon cancer in Japan is positively related to the increased intake of fat and protein. In addition, the decrease in TDF intake has accelerated the mortality of colon cancer after a delay of 23-24 years. The importance of fat/TDF as a nutritional criterion for the incidence of colon cancer needs to be better recognized展开更多
The main objective of this research is to study the effect of fiber weight ratio and chemical fiber modification on flexural properties of composites reinforced with Posidonia fiber. An unsaturated polyester matrix re...The main objective of this research is to study the effect of fiber weight ratio and chemical fiber modification on flexural properties of composites reinforced with Posidonia fiber. An unsaturated polyester matrix reinforced with untreated and treated Posidonia fibers was fabricated under various fiber weight ratios. Results showed that the combined chemical treatment provided better mechanical properties of composites in comparison with untreated fiber. The fiber weight ratio influenced the flexural properties of composites. Indeed, a maximum value of flexural modulus was observed for 10% fiber weight ratio for composites reinforced with treated fibers. SEM photographs revealed a different fracture surface between Posidonia fibers reinforced polyester composites.展开更多
The vibration reduction characteristics of composite beams filled with magnetorheological elastomer core are studied experimentally.The fiber metal laminates with magnetorheological elastomers core is self-designed an...The vibration reduction characteristics of composite beams filled with magnetorheological elastomer core are studied experimentally.The fiber metal laminates with magnetorheological elastomers core is self-designed and prepared.Internal magnetic field is applied to the beam to explore its action of damping vibration performance under the magnetic field for the first time.The composite elements test system with controllable magnetic field intensity is designed and the function of each part is introduced.Then,a set of reasonable and standard vibration test flow of this type of composite beam under different magnetic field intensity is clarified,and the practical test is conducted.It has been found that the composite beam has excellent damping performance with the first 4 damping ratios being greater than 10%.Moreover,after the magnetic field is applied,its damping results can be further improved to meet the active control purpose.展开更多
The vibration attenuation and damping characteristics of carbon fiber reinforced composite laminates with different thicknesses were investigated by hammering experiments under free boundary constraints in different d...The vibration attenuation and damping characteristics of carbon fiber reinforced composite laminates with different thicknesses were investigated by hammering experiments under free boundary constraints in different directions.The dynamic signal testing and analysis system is applied to collect and analyze the vibration signals of the composite specimens,and combine the self-spectrum analysis and logarithmic decay method to identify the fundamental frequencies of different specimens and calculate the damping ratios of different directions of the specimens.The results showed that the overall stiffness of the specimen increased with the increase of the specimen thickness,and when the thickness of the sample increases from 24mm to 32mm,the fundamental frequency increases by 35.1%,the vibration showed the same vibration attenuation and energy dissipation characteristics in the 0°and 90°directions of the specimen,compared with the specimen in the 45°direction,which was less likely to be excited and had poorer vibration attenuation ability,while the upper and lower surfaces of the same specimen showed slightly different attenuation characteristics to the vibration,the maximum difference of damping capacity between top and bottom surfaces of CFRP plates is about 70%.展开更多
In this paper,we have mainly studied the amplification effect of thulium-doped fiber amplifier(TDFA)at 2µm,and compared different amplification effects of the one-stage TDFA,two-stage TDFA and three-stage TDFA at...In this paper,we have mainly studied the amplification effect of thulium-doped fiber amplifier(TDFA)at 2µm,and compared different amplification effects of the one-stage TDFA,two-stage TDFA and three-stage TDFA at proper conditions.The simulation results show that within the effective threshold,with the increase of the pump power,the amplification effect of the optical amplifier improves,but the signal-to-noise ratio(SNR)of the output signal decreases,in order to balance the gain benefit and noise coefficient of TDFA,we can use a multi-stage amplification structure.Three-stage backward-pumped series 2.06µm TDFA,whose slope efficiency can achieve 11%at certain condition.At 5.2 W pump power,the output signal gain of 2µm TDFA exceeds 20 dB,and the output SNR is higher than 32 dB.In addition,the effect of the optimum length of thulium-doped fiber on the amplification performance of 2µm TDFA is also analyzed in this paper.These simulation results are important for the experiment and design of 2µm TDFA.展开更多
In this paper we investigate the reinforcement mechanism of high viscosity rubber/SBS modified asphalt mortar mixed with fiber （mineral, lignin or carbon fiber） and deoiled asphalt （DOA）. The softening point, pene...In this paper we investigate the reinforcement mechanism of high viscosity rubber/SBS modified asphalt mortar mixed with fiber （mineral, lignin or carbon fiber） and deoiled asphalt （DOA）. The softening point, penetration and viscosity tests were conducted to characterize the engineering properties of asphalt-fiber mortar. The microstructure of fiber was observed using scanning electron microscopy （SEM）, and the results indicated that fiber can effectively improve the toughness of asphalt matrix through forming a spatial network structure, and then adhesion and stabilization of asphalt binder. The cone penetration test was designed to study the rheological property of fiber modified asphalt. The results indicated that the reinforcement effect increased with fibers and DOA fraction increasing to a certain threshold, and the optimal fiber content was dependent on the fiber type and its length. Fiber content and filler-asphalt ratio had significant effects on the softening point, penetration, viscosity and cone penetration of asphalt mortar.展开更多
文摘In today's era of continuous advancement in materials science,the properties of materials are constantly being enhanced,and their application fields are also expanding continuously.SAF(Super Absorbent Fiber),one such material,stands out.Compared to traditional SAP(Super Absorbent Polymer),SAF boasts a unique fibrous form and exceptional performance,presenting broad application prospects.
文摘Use of environmentally friendly approaches with the purpose of strengthening soil layers along with finding correlations between the mechanical characteristics of fiber-reinforced soils such as indirect tensile strength(ITS)and California bearing ratio(CBR)and as well as the evaluation of shear strength parameters obtained from the triaxial test would be very effective at geotechnical construction sites.This research was aimed at investigating the influence of natural fibers as sustainable ones including basalt(BS)and bagasse(BG)as well as synthetic polyester(PET)fibers on the strength behavior of clayey soil.To this end,the effects of various fiber contents(0.5%,1%and 2%)and lengths(2.5 mm,5 mm and 7.5 mm)were experimentally evaluated.By conducting ITS and CBR tests,it was found that increasing fiber content and length had a significant influence on CBR and ITS values.Moreover,2%of 7.5 mm-long fibers led to the largest values of CBR and ITS.The CBR values of soil reinforced with PET,BS,and BG fibers were determined as 19.17%,15.43%and 13.16%,respectively.The ITS values of specimens reinforced with PET,BS,and BG fibers were reported as 48.57 kPa,60.7 kPa and 47.48 kPa,respectively.The results of the triaxial compression test revealed that with the addition of BS fibers,the internal friction angle increased by about 100%,and with the addition of PET fibers,the cohesion increased by about 70%.Moreover,scanning electron microscope(SEM)analysis was employed to confirm the findings.The relationship between CBR and ITS values,obtained via statistical analysis and used for the optimum design of road pavement layers,demonstrated that these parameters had high correlation coefficients.The outcomes of multiple linear regression and sensitivity analysis also confirmed that the fiber content had a greater effect on CBR and ITS values than fiber length.
文摘A new and practical fluorescence temperature detecting system based on fluorescence intensity ratio was proposed . The background theory of fluorescence intensity-ratio method was presented simply. And the characters of rare earth doped samples were detailed. The erbium-doped fiber was chosen as the sensing element. The energy levels of 2H11/2 and 4S3/2 are responsible for the emission of radiation at approximately 530 and 555 nm. The erbium-doped (960 ppm) fiber of length 20 cm and core diameter 3.2μm was used as the sensing part. A silica photodiode transfers the fluorescence signal to electric signal, then the ratio of the average of the two different signals was calculated by the computer and the temperature was obtained. The ratio R of the intensity resulting from the transition between the two levels varies proportionly with temperature interval from 293 K to 373 K. The sensitivity of the sensor is approximately 0.05 K-1.
文摘The effect of chemical modification, reinforcement structure and fiber weight ratio on the flexural proprieties of Luffa-polyester composites was studied. A unsaturated polyester matrix reinforced with a mat of Luffa external wall fibers (ComLEMat), a short Luffa external wall fibers(ComLEBC) and a short Luffa core fi-bers (ComLCBC) was fabricated under various conditions of fibers treatments (combined process, acetylat-ing and cyanoethylating) and fiber weight ratio. It resorts that acetylating and cyanoethylating enhance the flexural strength and the flexural modulus. The fiber weight ratio influenced the flexural properties of com-posites. Indeed, a maximum value of strength and strain is observed over a 10% fiber weight ratio. The uses of various reinforcement structures were investigated. The enhancement of elongation at break and the strain values of the composite reinforced by natural mat was proved.
基金supported by the National Key R&D Program of China(No.2017YFC1200400)the Development Fund of Institute of Fluid Physics,China Academy of Engineering Physics(No.SFZ20150302)。
文摘A metal-assisted method is proposed for the evaluation of gases’molecular abundance ratio in fiber-optic laser-induced breakdown spectroscopy(FO-LIBS).This method can reduce the laser ablation energy and make gas composition identification possible.The principle comes from the collision between the detected gases and the plasma produced by the laser ablation of the metal substrate.The interparticle collision in the plasma plume leads to gas molecules dissociating and sparking,which can be used to determine the gas composition.The quantitative relationship between spectral line intensity and molecular abundance ratio was developed over a large molecular abundance ratio range.The influence of laser ablation energy and substrate material on gas quantitative calibration measurement is also analyzed.The proposed metal-assisted method makes the measurement of gases’molecular abundance ratios possible with an FO-LIBS system.
基金Hubei Provincial department of education(No.2000A4002)
文摘The chiral materials were prepared by using the carbon fiber helices as chiral inclusions, and the composite of Fe3O4 and polyaniline as matrix. The electromagnetic properties, including the rotation angles, the axial ratios and the complex chirality parameters, were measured by using a circular waveguide method in the 8.5-11.0 GHz frequency range. The dependence of these electromagnetic properties on the frequency and the concentration of the Fe3O4 in the composite matrix were analyzed. The results show that an appropriate concentration of Fe3O4 in the matrix is useful in improving the electromagnetic properties of the chiral material.
文摘In this paper, two methods were developed to assess the blending ratio of two-componentfiber bundles. They were the peak-height method and the slope method. The relationship be-tween blending ratio and testing data was analysed, and the regression curves were obtained bystepwise regression method. It was pointed out that the testing errors of both methods were lessthan two percent. The validities of both methods were verified by experiments, All calculationsof both methods were completed by computer. The blending ratio was ascertained from the test-ing data of bundle fiber strength tester which was made by the authors themselves.
基金Supported by the National Natural Science Foundation of China(No.31872609)the Innovation Support Program for High-level Talents of Dalian City(No.2019RD12)+1 种基金the Key Research Project of Liaoning Provincial Department of Education in 2022(No.LJKZZ 20220091)the earmarked fund for CARS-49(CARS-49)。
文摘To adapt to the change of aquaculture workshop site,optimize the shape of aquaculture tanks and improve the utilization rate of breeding space,it is necessary to determine the appropriate length width ratio parameters of aquaculture tanks.In this paper,computational fluid dynamics(CFD)technology is adopted to study the flow field performance of aquaculture tanks with different L/B ratios(L:the length;B:the width,of aquaculture tank)and different jet direction conditions(lengthways jet and widthways jet).A three-dimensional numerical calculation model of turbulence in rounded rectangle aquaculture tanks in dual-diagonal-inlet layout was established.Jet directions are arranged lengthways and widthways,and the water flow velocity,resistance coefficient change,vorticity,etc.are analyzed under two working conditions.Results show that the flow field performance in aquaculture tank decreases with the increase of the L/B ratio.The flow field performed well when L/B was 1.0-1.3,sharply dropped at 1.4-1.6,and poor at 1.7-1.9.The results provided a theoretical basis for the design and optimization in flow field performance of the industrialized circulating aquaculture tanks.
文摘The daily intake of total dietary fiber (TDF) was evaluated from data of the National Nutrition Survey (NNS) in Japan for 41 years since 1947. An interrelationship between the nutrient intake, including TDF, and the mortality from colon cancer in Japanese people was calculated by a simple correlation coefficient and time-series correlation coeffcient.TDF intake per capita decreased rapidly from 27.4 g in 1947 to 15.8 g in 1963, and subsequently decreased by a lesser rate to 15.3 g in 1987. Fat intake increased rapidly from 18.0 g in 1950 to 56.6 g in 1987.The age-adjusted mortality from colon cancer shows a significant positive correlation with both the intakes of animal protein and of total fat, and the fat energy ratio. A time-series analysis indicates that the mortality from colon cancer was negatively correlated with TDF with a 15-27 year delay, the maximum correlation existing with a 23-year lag (r = -0.947). The TDF intake was less than 17.9 g in 1965. At the same time, the mortality from colon cancer increased rapidly. A fat/TDF ratio above 3.0 resulted in a rapid increase in colon cancer mortality.The non-adjusted mortality from colon cancer has much the same interrelationship with TDF and fat intake as the adjusted figures. It is suggested that the cause of the increased mortality from colon cancer in Japan is positively related to the increased intake of fat and protein. In addition, the decrease in TDF intake has accelerated the mortality of colon cancer after a delay of 23-24 years. The importance of fat/TDF as a nutritional criterion for the incidence of colon cancer needs to be better recognized
文摘The main objective of this research is to study the effect of fiber weight ratio and chemical fiber modification on flexural properties of composites reinforced with Posidonia fiber. An unsaturated polyester matrix reinforced with untreated and treated Posidonia fibers was fabricated under various fiber weight ratios. Results showed that the combined chemical treatment provided better mechanical properties of composites in comparison with untreated fiber. The fiber weight ratio influenced the flexural properties of composites. Indeed, a maximum value of flexural modulus was observed for 10% fiber weight ratio for composites reinforced with treated fibers. SEM photographs revealed a different fracture surface between Posidonia fibers reinforced polyester composites.
基金This study was supported by the National Natural Science Foundation of China(granted No.51505070)the Fundamental Research Funds for the Central Universities of China(granted No.N160313002,N160312001,N170302001,N180302004,N180703018,N180312012 and N180313006)the National Key Laboratory of Science and Technology on Advanced Composites in Special Environments,Harbin Institute of Technology(granted No.6142905192512).
文摘The vibration reduction characteristics of composite beams filled with magnetorheological elastomer core are studied experimentally.The fiber metal laminates with magnetorheological elastomers core is self-designed and prepared.Internal magnetic field is applied to the beam to explore its action of damping vibration performance under the magnetic field for the first time.The composite elements test system with controllable magnetic field intensity is designed and the function of each part is introduced.Then,a set of reasonable and standard vibration test flow of this type of composite beam under different magnetic field intensity is clarified,and the practical test is conducted.It has been found that the composite beam has excellent damping performance with the first 4 damping ratios being greater than 10%.Moreover,after the magnetic field is applied,its damping results can be further improved to meet the active control purpose.
基金supported by the Fundamental Research Funds for the Central Universities [grant nos.DUT21LAB108,DUT22LAB401].
文摘The vibration attenuation and damping characteristics of carbon fiber reinforced composite laminates with different thicknesses were investigated by hammering experiments under free boundary constraints in different directions.The dynamic signal testing and analysis system is applied to collect and analyze the vibration signals of the composite specimens,and combine the self-spectrum analysis and logarithmic decay method to identify the fundamental frequencies of different specimens and calculate the damping ratios of different directions of the specimens.The results showed that the overall stiffness of the specimen increased with the increase of the specimen thickness,and when the thickness of the sample increases from 24mm to 32mm,the fundamental frequency increases by 35.1%,the vibration showed the same vibration attenuation and energy dissipation characteristics in the 0°and 90°directions of the specimen,compared with the specimen in the 45°direction,which was less likely to be excited and had poorer vibration attenuation ability,while the upper and lower surfaces of the same specimen showed slightly different attenuation characteristics to the vibration,the maximum difference of damping capacity between top and bottom surfaces of CFRP plates is about 70%.
基金supported by the Natural Science Foundation of Guangdong Province(Nos.2023A1515010093)the Shenzhen Fundamental Research Program(Nos.JCYJ20220809170611004,20231121110828001 and 20231121113641002)the Taipei University of Technology-Shenzhen University Joint Research Program(No.2024001).
文摘In this paper,we have mainly studied the amplification effect of thulium-doped fiber amplifier(TDFA)at 2µm,and compared different amplification effects of the one-stage TDFA,two-stage TDFA and three-stage TDFA at proper conditions.The simulation results show that within the effective threshold,with the increase of the pump power,the amplification effect of the optical amplifier improves,but the signal-to-noise ratio(SNR)of the output signal decreases,in order to balance the gain benefit and noise coefficient of TDFA,we can use a multi-stage amplification structure.Three-stage backward-pumped series 2.06µm TDFA,whose slope efficiency can achieve 11%at certain condition.At 5.2 W pump power,the output signal gain of 2µm TDFA exceeds 20 dB,and the output SNR is higher than 32 dB.In addition,the effect of the optimum length of thulium-doped fiber on the amplification performance of 2µm TDFA is also analyzed in this paper.These simulation results are important for the experiment and design of 2µm TDFA.
基金supported by the National Natural Science Foundation of China (51008307)the Fundamental Research Funds for the Central Universities (09CX04039A)the Graduate Student Innovation Project of China University of Petroleum (East China) (12CX06055A)
文摘In this paper we investigate the reinforcement mechanism of high viscosity rubber/SBS modified asphalt mortar mixed with fiber （mineral, lignin or carbon fiber） and deoiled asphalt （DOA）. The softening point, penetration and viscosity tests were conducted to characterize the engineering properties of asphalt-fiber mortar. The microstructure of fiber was observed using scanning electron microscopy （SEM）, and the results indicated that fiber can effectively improve the toughness of asphalt matrix through forming a spatial network structure, and then adhesion and stabilization of asphalt binder. The cone penetration test was designed to study the rheological property of fiber modified asphalt. The results indicated that the reinforcement effect increased with fibers and DOA fraction increasing to a certain threshold, and the optimal fiber content was dependent on the fiber type and its length. Fiber content and filler-asphalt ratio had significant effects on the softening point, penetration, viscosity and cone penetration of asphalt mortar.
