To achieve a low-complexity nonlinearity compensation(NLC)in high-symbol-rate(HSR)systems,we propose a modified weighted digital backpropagation(M-W-DBP)by jointly shifting the calculated position of nonlinear phase n...To achieve a low-complexity nonlinearity compensation(NLC)in high-symbol-rate(HSR)systems,we propose a modified weighted digital backpropagation(M-W-DBP)by jointly shifting the calculated position of nonlinear phase noise and considering the correlation of neighboring symbols in the NLC section of DBP.Based on this model,with the aid of neural network optimization,a learned version of M-W-DBP(M-W-LDBP)is also proposed and explored.Furthermore,enough technical details are revealed for the first time,including the principle of our proposed M-W-DBP and M-W-LDBP,the training process,and the complexity analysis of different DBPclass NLC algorithms.Evaluated numerically with QPSK,16QAM,and PS-64QAM modulation formats,1-step-per-span(1-StPS)M-W-DBP/LDBP achieves up to 1.29/1.49 dB and 0.63/0.74 dB signal-to-noise ratio improvement compared to chromatic dispersion compensation(CDC)in 90-GBaud and 128-GBaud 1000-km single-channel transmission systems,respectively.Moreover,1-StPS M-W-DBP/LDBP provides a more powerful NLC ability than 2-StPS LDBP but only needs about 60%of the complexity.The effectiveness of the proposed M-W-DBP and M-W-LDBP in the presence of laser phase noise is also verified and the necessity of using the learned version of M-WDBP is also discussed.This work is a comprehensive study of M-W-DBP/LDBP and other DBP-class NLC algorithms in HSR systems.展开更多
A novel chaotic optical time-domain reflectometry(OTDR)-based approach was proposed for monitoring long-haul fiber communication systems with multiple fiber segments. The self-phase modulation and group velocity dispe...A novel chaotic optical time-domain reflectometry(OTDR)-based approach was proposed for monitoring long-haul fiber communication systems with multiple fiber segments. The self-phase modulation and group velocity dispersion effects of the optical cable was considered in demonstrating the proof-of-concept experiment and simulation. In experiments, the correlation peaks are clearly obtained from the correlation trace between the reference and reflected(or scattered) light signals propagating in three optical-fiber segments. The technique affords a high spatial resolution of 2 m, and further long-haul fiber simulations indicate that the sensing distance can be more than 3300 km. Thus, the new proposed technique can be effectively applied for health monitoring of long-haul fiber communication systems.展开更多
This article puts forward long-reach and high-performance Radio over Fiber (RoF) Communication Systems.Two schemes are proposed for solving the transmission restriction factors of the RoF system and verifies the syste...This article puts forward long-reach and high-performance Radio over Fiber (RoF) Communication Systems.Two schemes are proposed for solving the transmission restriction factors of the RoF system and verifies the system through experiments.One scheme is 40GHz RoF system based on external modulation with odd-order sideband-suppressed.The other one is 40GHz Optical Frequency Division Multiplexing (OFDM) system based on Optical Carrier-Suppression (OCS),external modulation.Both theory and experiment prove that the two systems allow not only low chromatic dispersion,but also long-distance transmission.展开更多
Low-cost,flexible and intelligent optical performance monitoring and management is a key enabling technology for network quality guarantee,especially in the era of explosive growth of communication capacity and networ...Low-cost,flexible and intelligent optical performance monitoring and management is a key enabling technology for network quality guarantee,especially in the era of explosive growth of communication capacity and network scale.However,to the best of our knowledge,it is extremely challenging to implement real-time performance monitoring and operations,administration and maintenance(OAM) in a highly complex dynamic network.In this paper,we propose an innovative optical identification(OID) scheme that can realize both performance monitoring and some advanced OAM sub-functions.The basic concepts,applications,challenges and evolution directions of this OID tool are also discussed.展开更多
Advancements in mode-division multiplexing(MDM)techniques,aimed at surpassing the Shannon limit and augmenting transmission capacity,have garnered significant attention in optical fiber communica-tion,propelling the d...Advancements in mode-division multiplexing(MDM)techniques,aimed at surpassing the Shannon limit and augmenting transmission capacity,have garnered significant attention in optical fiber communica-tion,propelling the demand for high-quality multiplexers and demultiplexers.However,the criteria for ideal-mode multiplexers/demultiplexers,such as performance,scalability,compatibility,and ultra-compactness,have only partially been achieved using conventional bulky devices(e.g.,waveguides,grat-ings,and free space optics)—an issue that will substantially restrict the application of MDM techniques.Here,we present a neuro-meta-router(NMR)optimized through deep learning that achieves spatial multi-mode division and supports multi-channel communication,potentially offering scalability,com-patibility,and ultra-compactness.An MDM communication system based on an NMR is theoretically designed and experimentally demonstrated to enable simultaneous and independent multi-dataset transmission,showcasing a capacity of up to 100 gigabits per second(Gbps)and a symbol error rate down to the order of 104,all achieved without any compensation technologies or correlation devices.Our work presents a paradigm that merges metasurfaces,fiber communications,and deep learning,with potential applications in intelligent metasurface-aided optical interconnection,as well as all-optical pat-tern recognition and classification.展开更多
With the continuous development of automotive intelligent networking and autonomous driving technologies,the number of in-vehicle electronic systems and applications is increasing rapidly.This change increases the amo...With the continuous development of automotive intelligent networking and autonomous driving technologies,the number of in-vehicle electronic systems and applications is increasing rapidly.This change increases the amount of data to be transmitted in the vehicle and puts forward further requirements of higher speed and safety for in-vehicle communication.Traditional vehicle bus technologies are no longer sufficient to meet today’s high-speed transmission requirements,in which copper cables are used extensively,resulting in serious electromagnetic interference(EMI).Vehicle optical fiber communication technology,besides greatly improving the data transmission rate,has the advantages of anti-EMI,reducing cable space and vehicle mass.This paper first presents the motivation of applying vehicle optical fiber communication technology and reviews the development history of vehicle optical fiber communication technology.Then,the paper researches the devel-opment trend of automotive electrical and electronic architecture(EEA),from distributed EEA to domain centralized EEA and zone-oriented EEA.Based on the discussion of the development trend of automotive EEA,an EEA based on vehicle optical fiber communication technology is proposed.Finally,the key points and future directions of vehicle optical fiber communication technology research are highlighted,including vehicle multi-mode optical fiber technology,vehicle optical fiber network protocol,and topology.展开更多
A new receiver is proposed, which uses the fiber optical parametric amplifier(FOPA) in optical code division multiple access(OCDMA) over free space optic(FSO) communication system. The noise tolerance as the performan...A new receiver is proposed, which uses the fiber optical parametric amplifier(FOPA) in optical code division multiple access(OCDMA) over free space optic(FSO) communication system. The noise tolerance as the performance index in this receiver is derived. The receiver can not only improve the noise tolerance but also change the pump data conveniently for adapting to the length variation of the coding sequence under a complex and fast-changing weather condition. The influence of different factors on the noise tolerance is analyzed, and a significant improvement of about 18.77 d B for the noise tolerance can be achieved when the pump power and the length of coding sequence are 5 W and 256, respectively.展开更多
In this paper,a double-effect DNN-based Digital Back-Propagation(DBP)scheme is proposed and studied to achieve the Integrated Communication and Sensing(ICS)ability,which can not only realize nonlinear damage mitigatio...In this paper,a double-effect DNN-based Digital Back-Propagation(DBP)scheme is proposed and studied to achieve the Integrated Communication and Sensing(ICS)ability,which can not only realize nonlinear damage mitigation but also monitor the optical power and dispersion profile over multi-span links.The link status information can be extracted by the characteristics of the learned optical fiber parameters without any other measuring instruments.The efficiency and feasibility of this method have been investigated in different fiber link conditions,including various launch power,transmission distance,and the location and the amount of the abnormal losses.A good monitoring performance can be obtained while the launch optical power is 2 dBm which does not affect the normal operation of the optical communication system and the step size of DBP is 20 km which can provide a better distance resolution.This scheme successfully detects the location of single or multiple optical attenuators in long-distance multi-span fiber links,including different abnormal losses of 2 dB,4 dB,and 6 dB in 360 km and serval combinations of abnormal losses of(1 dB,5 dB),(3 dB,3 dB),(5 dB,1 dB)in 360 km and 760 km.Meanwhile,the transfer relationship of the estimated coefficient values with different step sizes is further investigated to reduce the complexity of the fiber nonlinear damage compensation.These results provide an attractive approach for precisely sensing the optical fiber link status information and making correct strategies timely to ensure optical communication system operations.展开更多
An equivalent noise model of optical receiver amplifiers as shown in Fig.1 has been given in many fiber optical communication literatures. It is proved in this paper that this equivalent noise model is neither equiva...An equivalent noise model of optical receiver amplifiers as shown in Fig.1 has been given in many fiber optical communication literatures. It is proved in this paper that this equivalent noise model is neither equivalent to the original one nor measurable. The main reason is that the position of the input impedance in this noise model is not the same with its in the typical noise model,but the same S vn , S in with the typical noise model are used. So the equivalent noise model above is wrong and is not fit to be taken into application.展开更多
Erbium fiber grating ring laser (EFRL) witn an integrated travelling wave and low polarization mode noise is reported. Through modulated experiment of a successful 2.488 Gb/s RZ data, it is shown that the EFRL is a pr...Erbium fiber grating ring laser (EFRL) witn an integrated travelling wave and low polarization mode noise is reported. Through modulated experiment of a successful 2.488 Gb/s RZ data, it is shown that the EFRL is a promising alternative to DFB lasers for high-speed transmission applications.展开更多
2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includ...2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includes a 4： 1 multiplexer and a laser diode driver （LDD）, has four 622 Mbit/s random signals as its inputs and gets a 2.5 Gbit/s driving signal as its output; the receiver detects a 2.5 Gbit/s random signal and gets four 622 Mbit/s signals at the output. The main circuits include a trans-impedance amplifier （TIA）, a limiting amplifier, a clock and data recovery （CDR） unit, and a 1： 4 demultiplexer （DEMUX）. Test results prove the logic functions of the transmitter to be right, and the 10% to 90% rise and fall times of transmitter＇s output data eye diagram are 211.1 ps and 200 ps, respectively. The sensitivity of the receiver is measured to be better than 20 mV. The root mean square jitter of the DEMUX＇s output data is 15.6 ps and that of the clock after 1： 4 frequency dividing is 1.9 ps. Two chips are both applicable to 2.5 Gbit/s optical fiber communication systems.展开更多
We demonstrate the generation of supercontinuum(SC) spectrum covering S+C+L band of optical communication by injecting 1.4 ps optical pulses with center wavelength of 1552 nm and repetition rate of 10 GHz into an all-...We demonstrate the generation of supercontinuum(SC) spectrum covering S+C+L band of optical communication by injecting 1.4 ps optical pulses with center wavelength of 1552 nm and repetition rate of 10 GHz into an all-normal dispersion photonic crystal fiber(PCF) with length of 80 m. The experimental results are in good agreement with the numerical simulations, which are used to illustrate the SC generation dynamics by self-phase modulation and optical wave breaking(WB).展开更多
Multiwavelength chirped fiber Bragg grating (MCFBG) is a more valuable approach to chromatic dispersion compensation. And adjusting the structure of FBG will optimize the performance of dispersion compensator in 8...Multiwavelength chirped fiber Bragg grating (MCFBG) is a more valuable approach to chromatic dispersion compensation. And adjusting the structure of FBG will optimize the performance of dispersion compensator in 8×10 Gb/s DWDM network, which is proved by simulating calculation.展开更多
For the efficient dynamic dispersion compensation, it is essential to monitor the dispersion accurately. The existing main dispersion monitoring techniques in high bit-rate optical communication systems are presented ...For the efficient dynamic dispersion compensation, it is essential to monitor the dispersion accurately. The existing main dispersion monitoring techniques in high bit-rate optical communication systems are presented as well as their operating principles and research progress. The advantages and disadvantages of these methods are analyzed and discussed.展开更多
Abstract:Based on optical fiber technology, the main electric circuit of the remote I/O unit controller is studied. And the application of the system is illustrated.
Split-step digital backward propagation （DBP） can be combined with coherent detection to compensate for fiber nonlinear impairments. A large number of DBP steps is usually needed for a long-haul fiber system, and th...Split-step digital backward propagation （DBP） can be combined with coherent detection to compensate for fiber nonlinear impairments. A large number of DBP steps is usually needed for a long-haul fiber system, and this creates a heavy computational load. In a trade-off between complexity and performance, interchannel nonlinearity can be disregarded in order to simplify the DBP algorithm. The number of steps can also be reduced at the expense of performance. In periodic dispersion-managed long-haul transmission systems, optical waveform distortion is dominated by chromatic dispersion. As a result, the nonlinearity of the optical signal repeats in every dispersion period. Because of this periodic behavior, DBP of many fiber spans can be folded into one span. Using this distance-folded DBP method, the required computation for a transoceanic transmission system with full inline dispersion compensation can be reduced by up to two orders of magnitude with negligible penalty. The folded DBP method can be modified to compensate for nonlinearity in fiber links with non-zero residua dispersion per span.展开更多
This paper introduces a new-developed mine fire-resistant optical fiber cable (OFC)KL5004,its structural characteristics, main feature, the theory about fire resistance and its application in high output and efficienc...This paper introduces a new-developed mine fire-resistant optical fiber cable (OFC)KL5004,its structural characteristics, main feature, the theory about fire resistance and its application in high output and efficiency mine.展开更多
<div style="text-align:justify;"> In order to meet the needs of the rapid development of optical fiber communication technology, combined with the thinking of the Internet of Things, a new idea of desi...<div style="text-align:justify;"> In order to meet the needs of the rapid development of optical fiber communication technology, combined with the thinking of the Internet of Things, a new idea of designing an optical fiber test equipment using Raspberry Pi is proposed. At the same time, the design of a multi-parameter measuring device for optical fiber signals based on Flask was completed. </div>展开更多
The configuration of the novel three-stage L-band erbium-doped fiber amplifier with very large and flat gain and very low noise figure presented in this paper uses the forward ASE (amplified spontaneous emission) from...The configuration of the novel three-stage L-band erbium-doped fiber amplifier with very large and flat gain and very low noise figure presented in this paper uses the forward ASE (amplified spontaneous emission) from the first section of the EDF (erbium-doped fiber) and the backward ASE from the third section of the EDF (both serve as the secondary pump sources of energy) to pump the second EDF. To improve the pump efficiency, the power of the pump is split into two parts (with a ratio of e.g. 2:7). The characteristics of this L-band EDFA are studied on the basis of the Giles Model with ASE.展开更多
基金supported in part by National Natural Science Foundation of China(No.62271080)in part by Fund of State Key Laboratory of IPOC(BUPT)(No.IPOC2022ZT06)in part by BUPT Excellent Ph.D Students Foundation(No.CX2022102).
文摘To achieve a low-complexity nonlinearity compensation(NLC)in high-symbol-rate(HSR)systems,we propose a modified weighted digital backpropagation(M-W-DBP)by jointly shifting the calculated position of nonlinear phase noise and considering the correlation of neighboring symbols in the NLC section of DBP.Based on this model,with the aid of neural network optimization,a learned version of M-W-DBP(M-W-LDBP)is also proposed and explored.Furthermore,enough technical details are revealed for the first time,including the principle of our proposed M-W-DBP and M-W-LDBP,the training process,and the complexity analysis of different DBPclass NLC algorithms.Evaluated numerically with QPSK,16QAM,and PS-64QAM modulation formats,1-step-per-span(1-StPS)M-W-DBP/LDBP achieves up to 1.29/1.49 dB and 0.63/0.74 dB signal-to-noise ratio improvement compared to chromatic dispersion compensation(CDC)in 90-GBaud and 128-GBaud 1000-km single-channel transmission systems,respectively.Moreover,1-StPS M-W-DBP/LDBP provides a more powerful NLC ability than 2-StPS LDBP but only needs about 60%of the complexity.The effectiveness of the proposed M-W-DBP and M-W-LDBP in the presence of laser phase noise is also verified and the necessity of using the learned version of M-WDBP is also discussed.This work is a comprehensive study of M-W-DBP/LDBP and other DBP-class NLC algorithms in HSR systems.
基金the Project Funding National Natural Science Foundation of China (NSFC) (61527819)University Natural Science Research Project of Jiangsu Province (19KJB510005)High-Level Training Fund project of Nanjing Xiaozhuang University (2019NXY18)
文摘A novel chaotic optical time-domain reflectometry(OTDR)-based approach was proposed for monitoring long-haul fiber communication systems with multiple fiber segments. The self-phase modulation and group velocity dispersion effects of the optical cable was considered in demonstrating the proof-of-concept experiment and simulation. In experiments, the correlation peaks are clearly obtained from the correlation trace between the reference and reflected(or scattered) light signals propagating in three optical-fiber segments. The technique affords a high spatial resolution of 2 m, and further long-haul fiber simulations indicate that the sensing distance can be more than 3300 km. Thus, the new proposed technique can be effectively applied for health monitoring of long-haul fiber communication systems.
基金partially supported by the National High-Tech Research and Development Plan of China("863" Program)under Grant No.2007AA01Z263
文摘This article puts forward long-reach and high-performance Radio over Fiber (RoF) Communication Systems.Two schemes are proposed for solving the transmission restriction factors of the RoF system and verifies the system through experiments.One scheme is 40GHz RoF system based on external modulation with odd-order sideband-suppressed.The other one is 40GHz Optical Frequency Division Multiplexing (OFDM) system based on Optical Carrier-Suppression (OCS),external modulation.Both theory and experiment prove that the two systems allow not only low chromatic dispersion,but also long-distance transmission.
基金supported in part by the National Key R&D Program of China under Grant No.2019YFB2205302。
文摘Low-cost,flexible and intelligent optical performance monitoring and management is a key enabling technology for network quality guarantee,especially in the era of explosive growth of communication capacity and network scale.However,to the best of our knowledge,it is extremely challenging to implement real-time performance monitoring and operations,administration and maintenance(OAM) in a highly complex dynamic network.In this paper,we propose an innovative optical identification(OID) scheme that can realize both performance monitoring and some advanced OAM sub-functions.The basic concepts,applications,challenges and evolution directions of this OID tool are also discussed.
基金supported by the National Key Research and Development Program of China(2023YFB2804704)the National Natural Science Foundation of China(12174292,12374278,and 62105250).
文摘Advancements in mode-division multiplexing(MDM)techniques,aimed at surpassing the Shannon limit and augmenting transmission capacity,have garnered significant attention in optical fiber communica-tion,propelling the demand for high-quality multiplexers and demultiplexers.However,the criteria for ideal-mode multiplexers/demultiplexers,such as performance,scalability,compatibility,and ultra-compactness,have only partially been achieved using conventional bulky devices(e.g.,waveguides,grat-ings,and free space optics)—an issue that will substantially restrict the application of MDM techniques.Here,we present a neuro-meta-router(NMR)optimized through deep learning that achieves spatial multi-mode division and supports multi-channel communication,potentially offering scalability,com-patibility,and ultra-compactness.An MDM communication system based on an NMR is theoretically designed and experimentally demonstrated to enable simultaneous and independent multi-dataset transmission,showcasing a capacity of up to 100 gigabits per second(Gbps)and a symbol error rate down to the order of 104,all achieved without any compensation technologies or correlation devices.Our work presents a paradigm that merges metasurfaces,fiber communications,and deep learning,with potential applications in intelligent metasurface-aided optical interconnection,as well as all-optical pat-tern recognition and classification.
基金supported by the National Key Research and Development Program of China(under Grant 2020YFB1600203).
文摘With the continuous development of automotive intelligent networking and autonomous driving technologies,the number of in-vehicle electronic systems and applications is increasing rapidly.This change increases the amount of data to be transmitted in the vehicle and puts forward further requirements of higher speed and safety for in-vehicle communication.Traditional vehicle bus technologies are no longer sufficient to meet today’s high-speed transmission requirements,in which copper cables are used extensively,resulting in serious electromagnetic interference(EMI).Vehicle optical fiber communication technology,besides greatly improving the data transmission rate,has the advantages of anti-EMI,reducing cable space and vehicle mass.This paper first presents the motivation of applying vehicle optical fiber communication technology and reviews the development history of vehicle optical fiber communication technology.Then,the paper researches the devel-opment trend of automotive electrical and electronic architecture(EEA),from distributed EEA to domain centralized EEA and zone-oriented EEA.Based on the discussion of the development trend of automotive EEA,an EEA based on vehicle optical fiber communication technology is proposed.Finally,the key points and future directions of vehicle optical fiber communication technology research are highlighted,including vehicle multi-mode optical fiber technology,vehicle optical fiber network protocol,and topology.
基金supported by the National Key Basic Research Special Foundation(Nos.2010CB327605 and 2010CB328300)the National Natural Science Foundation of China(No.61307109)+2 种基金the National High Technology Research and Development Program of China(Nos.2013AA031501 and 2013AA013303)the Specialized Research Fund for the Doctoral Program of Higher Education(No.20120005120021)the Fundamental Research Funds for the Central Universities(No.2013RC1202)
文摘A new receiver is proposed, which uses the fiber optical parametric amplifier(FOPA) in optical code division multiple access(OCDMA) over free space optic(FSO) communication system. The noise tolerance as the performance index in this receiver is derived. The receiver can not only improve the noise tolerance but also change the pump data conveniently for adapting to the length variation of the coding sequence under a complex and fast-changing weather condition. The influence of different factors on the noise tolerance is analyzed, and a significant improvement of about 18.77 d B for the noise tolerance can be achieved when the pump power and the length of coding sequence are 5 W and 256, respectively.
基金supported by the National Key Research and Development Program of China (2019YFB1803905)the National Natural Science Foundation of China (No.62171022)+2 种基金Beijing Natural Science Foundation (4222009)Guangdong Basic and Applied Basic Research Foundation (2021B1515120057)the Scientific and Technological Innovation Foundation of Shunde Graduate School,USTB (No.BK19AF005)。
文摘In this paper,a double-effect DNN-based Digital Back-Propagation(DBP)scheme is proposed and studied to achieve the Integrated Communication and Sensing(ICS)ability,which can not only realize nonlinear damage mitigation but also monitor the optical power and dispersion profile over multi-span links.The link status information can be extracted by the characteristics of the learned optical fiber parameters without any other measuring instruments.The efficiency and feasibility of this method have been investigated in different fiber link conditions,including various launch power,transmission distance,and the location and the amount of the abnormal losses.A good monitoring performance can be obtained while the launch optical power is 2 dBm which does not affect the normal operation of the optical communication system and the step size of DBP is 20 km which can provide a better distance resolution.This scheme successfully detects the location of single or multiple optical attenuators in long-distance multi-span fiber links,including different abnormal losses of 2 dB,4 dB,and 6 dB in 360 km and serval combinations of abnormal losses of(1 dB,5 dB),(3 dB,3 dB),(5 dB,1 dB)in 360 km and 760 km.Meanwhile,the transfer relationship of the estimated coefficient values with different step sizes is further investigated to reduce the complexity of the fiber nonlinear damage compensation.These results provide an attractive approach for precisely sensing the optical fiber link status information and making correct strategies timely to ensure optical communication system operations.
文摘An equivalent noise model of optical receiver amplifiers as shown in Fig.1 has been given in many fiber optical communication literatures. It is proved in this paper that this equivalent noise model is neither equivalent to the original one nor measurable. The main reason is that the position of the input impedance in this noise model is not the same with its in the typical noise model,but the same S vn , S in with the typical noise model are used. So the equivalent noise model above is wrong and is not fit to be taken into application.
文摘Erbium fiber grating ring laser (EFRL) witn an integrated travelling wave and low polarization mode noise is reported. Through modulated experiment of a successful 2.488 Gb/s RZ data, it is shown that the EFRL is a promising alternative to DFB lasers for high-speed transmission applications.
基金The National High Technology Research and Develop-ment Program of China (863 Program) (No.2001AA312010).
文摘2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includes a 4： 1 multiplexer and a laser diode driver （LDD）, has four 622 Mbit/s random signals as its inputs and gets a 2.5 Gbit/s driving signal as its output; the receiver detects a 2.5 Gbit/s random signal and gets four 622 Mbit/s signals at the output. The main circuits include a trans-impedance amplifier （TIA）, a limiting amplifier, a clock and data recovery （CDR） unit, and a 1： 4 demultiplexer （DEMUX）. Test results prove the logic functions of the transmitter to be right, and the 10% to 90% rise and fall times of transmitter＇s output data eye diagram are 211.1 ps and 200 ps, respectively. The sensitivity of the receiver is measured to be better than 20 mV. The root mean square jitter of the DEMUX＇s output data is 15.6 ps and that of the clock after 1： 4 frequency dividing is 1.9 ps. Two chips are both applicable to 2.5 Gbit/s optical fiber communication systems.
基金supported by the Guangdong Science and Technology Program(No.2012B090600009)the Guangdong Natural Science Fund(No.10451170003004948)
文摘We demonstrate the generation of supercontinuum(SC) spectrum covering S+C+L band of optical communication by injecting 1.4 ps optical pulses with center wavelength of 1552 nm and repetition rate of 10 GHz into an all-normal dispersion photonic crystal fiber(PCF) with length of 80 m. The experimental results are in good agreement with the numerical simulations, which are used to illustrate the SC generation dynamics by self-phase modulation and optical wave breaking(WB).
文摘Multiwavelength chirped fiber Bragg grating (MCFBG) is a more valuable approach to chromatic dispersion compensation. And adjusting the structure of FBG will optimize the performance of dispersion compensator in 8×10 Gb/s DWDM network, which is proved by simulating calculation.
文摘For the efficient dynamic dispersion compensation, it is essential to monitor the dispersion accurately. The existing main dispersion monitoring techniques in high bit-rate optical communication systems are presented as well as their operating principles and research progress. The advantages and disadvantages of these methods are analyzed and discussed.
文摘Abstract:Based on optical fiber technology, the main electric circuit of the remote I/O unit controller is studied. And the application of the system is illustrated.
文摘Split-step digital backward propagation （DBP） can be combined with coherent detection to compensate for fiber nonlinear impairments. A large number of DBP steps is usually needed for a long-haul fiber system, and this creates a heavy computational load. In a trade-off between complexity and performance, interchannel nonlinearity can be disregarded in order to simplify the DBP algorithm. The number of steps can also be reduced at the expense of performance. In periodic dispersion-managed long-haul transmission systems, optical waveform distortion is dominated by chromatic dispersion. As a result, the nonlinearity of the optical signal repeats in every dispersion period. Because of this periodic behavior, DBP of many fiber spans can be folded into one span. Using this distance-folded DBP method, the required computation for a transoceanic transmission system with full inline dispersion compensation can be reduced by up to two orders of magnitude with negligible penalty. The folded DBP method can be modified to compensate for nonlinearity in fiber links with non-zero residua dispersion per span.
文摘This paper introduces a new-developed mine fire-resistant optical fiber cable (OFC)KL5004,its structural characteristics, main feature, the theory about fire resistance and its application in high output and efficiency mine.
文摘<div style="text-align:justify;"> In order to meet the needs of the rapid development of optical fiber communication technology, combined with the thinking of the Internet of Things, a new idea of designing an optical fiber test equipment using Raspberry Pi is proposed. At the same time, the design of a multi-parameter measuring device for optical fiber signals based on Flask was completed. </div>
文摘The configuration of the novel three-stage L-band erbium-doped fiber amplifier with very large and flat gain and very low noise figure presented in this paper uses the forward ASE (amplified spontaneous emission) from the first section of the EDF (erbium-doped fiber) and the backward ASE from the third section of the EDF (both serve as the secondary pump sources of energy) to pump the second EDF. To improve the pump efficiency, the power of the pump is split into two parts (with a ratio of e.g. 2:7). The characteristics of this L-band EDFA are studied on the basis of the Giles Model with ASE.
