The advancement of planar micro-supercapacitors(PMSCs)for micro-electromechanical systems(MEMS)has been significantly hindered by the challenge of achieving high energy and power densities.This study addresses this is...The advancement of planar micro-supercapacitors(PMSCs)for micro-electromechanical systems(MEMS)has been significantly hindered by the challenge of achieving high energy and power densities.This study addresses this issue by leveraging screen-printing technology to fabricate high-performance PMSCs using innovative composite ink.The ink,a synergistic blend of few-layer graphene(Gt),carbon black(CB),and NiCo_(2)O_(4),was meticulously mixed to form a conductive and robust coating that enhanced the capacitive performance of the PMSCs.The optimized ink formulation and printing process result in a micro-supercapacitor with an exceptional areal capacitance of 18.95 mF/cm^(2)and an areal energy density of 2.63μW·h/cm^(2)at a current density of 0.05 mA/cm^(2),along with an areal power density of 0.025 mW/cm^(2).The devices demonstrated impressive durability with a capacitance retention rate of 94.7%after a stringent 20000-cycle test,demonstrating their potential for long-term applications.Moreover,the PMSCs displayed excellent mechanical flexibility,with a capacitance decrease of only 3.43%after 5000 bending cycles,highlighting their suitability for flexible electronic devices.The ease of integrating these PMSCs into series and parallel configurations for customized power further underscores their practicality for integrated power supply solutions in various technologies.展开更多
We report that the twisted few layer graphite(tFL-graphite)is a new family of moiréheterostructures(MHSs),which has richer and highly tunable moiréflat band structures entirely distinct from all the known MH...We report that the twisted few layer graphite(tFL-graphite)is a new family of moiréheterostructures(MHSs),which has richer and highly tunable moiréflat band structures entirely distinct from all the known MHSs.A tFL-graphite is composed of two few-layer graphite(Bernal stacked multilayer graphene),which are stacked on each other with a small twisted angle.The moiréband structure of the tFL-graphite strongly depends on the layer number of its composed two van der Waals layers.Near the magic angle,a tFL-graphite always has two nearly flat bands coexisting with a few pairs of narrowed dispersive(parabolic or linear)bands at the Fermi level,thus,enhances the DOS at EF.This coexistence property may also enhance the possible superconductivity as been demonstrated in other multiband superconductivity systems.Therefore,we expect strong multiband correlation effects in tFL-graphite.Meanwhile,a proper perpendicular electric field can induce several isolated nearly flat bands with nonzero valley Chern number in some simple tFL-graphites,indicating that tFL-graphite is also a novel topological flat band system.展开更多
Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon ...Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.展开更多
Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,...Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.展开更多
To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as wel...To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.展开更多
In this paper,we introduced a novel method to prepare the few-layer nitrogen-doped graphene(FNG)from expandable graphite with melamine.The super-capacitive properties of FNG were thoroughly characterized by a three-el...In this paper,we introduced a novel method to prepare the few-layer nitrogen-doped graphene(FNG)from expandable graphite with melamine.The super-capacitive properties of FNG were thoroughly characterized by a three-electrode system,and the results showed the FNG electrode achieved a specific capacitance as high as 83.8 mF/cm2 together with excellent cycling stability.This method could be a novel approach to combine the pseudo-capacitors and electric double layer capacitors.展开更多
Graphdiyne(GDY)is a two-dimensional carbon allotrope with exceptional physical and chemical properties that is gaining increasing attention.However,its efficient and scalable synthesis remains a significant challenge....Graphdiyne(GDY)is a two-dimensional carbon allotrope with exceptional physical and chemical properties that is gaining increasing attention.However,its efficient and scalable synthesis remains a significant challenge.We present a microwave-assisted approach for its continuous,large-scale production which enables synthesis at a rate of 0.6 g/h,with a yield of up to 90%.The synthesized GDY nanosheets have an average diameter of 246 nm and a thickness of 4 nm.We used GDY as a stable coating for potassium(K)metal anodes(K@GDY),taking advantage of its unique molecular structure to provide favorable paths for K-ion transport.This modification significantly inhibited dendrite formation and improved the cycling stability of K metal batteries.Full-cells with perylene-3,4,9,10-tetracarboxylic dianhydride(PTCDA)cathodes showed the clear superiority of the K@GDY anodes over bare K anodes in terms of performance,stability,and cycle life.The K@GDY maintained a stable voltage plateau and gave an excellent capacity retention after 600 cycles with nearly 100%Coulombic efficiency.This work not only provides a scalable and efficient way for GDY synthesis but also opens new possibilities for its use in energy storage and other advanced technologies.展开更多
We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) change...We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) changed from 0.5:1 to 4:1,and the impregnation time changed from 1 to 7 h.The typical composite phase change thermal storage materials doped with the as-treated graphite were fabricated using form-stable technique.To investigate the oxidation and anti-oxidation behavior of the impregnated graphite at high temperatures,the samples were put into a muffle furnace for a cyclic heat test.Based on SEM,EDS,DSC techniques,analyses on the impregnated technique suggested an optimized processing conditions of a 3 h impregnation time with the ratio of graphite:Al(H_(2)PO_(4))_(3) as 1:3 for graphite impregnation treatment.Further investigations on high-temperature phase change heat storage materials doped by the treated graphite suggested excellent oxidation resistance and thermal cycling performance.展开更多
Lithium-ion batteries(LIBs)are an electrochemical energy storage technology that has been widely used for portable electrical devices,electric vehicles,and grid storage,etc.To satisfy the demand for user convenience e...Lithium-ion batteries(LIBs)are an electrochemical energy storage technology that has been widely used for portable electrical devices,electric vehicles,and grid storage,etc.To satisfy the demand for user convenience especially for electric vehicles,the development of a fast-charging technology for LIBs has become a critical focus.In commercial LIBs,the slow kinetics of Li+intercalation into the graphite anode from the electrolyte solution is known as the main restriction for fast-charging.We summarize the recent advances in obtaining fast-charging graphite-based anodes,mainly involving modifications of the electrolyte solution and graphite anode.Specifically,strategies for increasing the ionic conductivity and regulating the Li+solvation/desolvation state in the electrolyte solution,as well as optimizing the fabrication and the intrinsic activity of graphite-based anodes are discussed in detail.This review considers practical ways to obtain fast Li+intercalation kinetics into a graphite anode from the electrolyte as well as analysing progress in the commercialization of fast-charging LIBs.展开更多
Magnesium potassium phosphate cement(MKPC)coatings exhibit potential for carbon steel protection but face challenges in practical application due to the preparation process and properties.This study develops flake gra...Magnesium potassium phosphate cement(MKPC)coatings exhibit potential for carbon steel protection but face challenges in practical application due to the preparation process and properties.This study develops flake graphite(FG)-modified MKPC coatings via spraying process,investigating the effects of FG size and dosage on phase composition,microstructure,mechanical properties,corrosion protection,and thermal conductivity.Results show that a low FG dosage(5 wt%)synergistically optimizes multifunctional performance.Compared to unmodified MKPC,FG2-1 exhibited exceptional impact resistance,associated with a 57%reduction in corrosion current density(icorr),a 356.3% increase in low-frequency impedance modulus(Z_(0.01 Hz))and a 37% increase in thermal conductivity.However,the coating with a high FG dosage(15 wt%)degraded performance due to defect accumulation and reduced crystallinity of KMgPO_(4)·6H_(2)O.This work advances the rational design of multifunctional inorganic coatings for extreme service environments requiring coupled corrosion protection and thermal management.展开更多
High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production meth...High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production method relies on repeated impregnation-carbonization and graphitization,and is plagued by lengthy preparation cycles and high energy consumption.Phase transition-assisted self-pressurized selfsintering technology can rapidly produce high-strength graphite materials,but the fracture strain of the graphite materials produced is poor.To solve this problem,this study used a two-step sintering method to uniformly introduce micro-nano pores into natural graphite-based bulk graphite,achieving improved fracture strain of the samples without reducing their density and mechanical properties.Using natural graphite powder,micron-diamond,and nano-diamond as raw materials,and by precisely controlling the staged pressure release process,the degree of diamond phase transition expansion was effectively regulated.The strain-to-failure of the graphite samples reached 1.2%,a 35%increase compared to samples produced by fullpressure sintering.Meanwhile,their flexural strength exceeded 110 MPa,and their density was over 1.9 g/cm^(3).The process therefore produced both a high strength and a high fracture strain.The interface evolution and toughening mechanism during the two-step sintering process were investigated.It is believed that the micro-nano pores formed have two roles:as stress concentrators they induce yielding by shear and as multi-crack propagation paths they significantly lengthen the crack propagation path.The two-step sintering phase transition strategy introduces pores and provides a new approach for increasing the fracture strain of brittle materials.展开更多
CeO_(2) based semiconductor are widely used in solar-driven photothermal catalytic dry reforming of methane(DRM)reaction,but still suffer from low activity and low light utilization efficiency.This study developed gra...CeO_(2) based semiconductor are widely used in solar-driven photothermal catalytic dry reforming of methane(DRM)reaction,but still suffer from low activity and low light utilization efficiency.This study developed graphite-CeO_(2) interfaces to enhance solar-driven photothermal catalytic DRM.Compared with carbon nanotubes-modified CeO_(2)(CeO_(2)-CNT),graphite-modified CeO_(2)(CeO_(2)-GRA)constructed graphite-CeO_(2) interfaces with distortion in CeO_(2),leading to the formation abundant oxygen vacancies.These graphite-CeO_(2) interfaces with oxygen vacancies enhanced optical absorption and promoted the generation and separation of photogenerated carriers.The high endothermic capacity of graphite elevated the catalyst surface temperature from 592.1−691.3℃,boosting light-to-thermal conversion.The synergy between photogenerated carriers and localized heat enabled Ni/CeO_(2)-GRA to achieve a CO production rate of 9985.6 mmol/(g·h)(vs 7192.4 mmol/(g·h)for Ni/CeO_(2))and a light-to-fuel efficiency of 21.8%(vs 13.8%for Ni/CeO_(2)).This work provides insights for designing graphite-semiconductor interfaces to advance photothermal catalytic efficiency.展开更多
The stability of matrix graphite under neutron irradiation and in corrosive environments is crucial for the safe operation of molten salt reactors(MSRs).Raman spectroscopy and a slow positron beam were employed to inv...The stability of matrix graphite under neutron irradiation and in corrosive environments is crucial for the safe operation of molten salt reactors(MSRs).Raman spectroscopy and a slow positron beam were employed to investigate the effects of He ion irradiation fluences and subsequent annealing on the microstructure and defects of the matrix graphite.He ions with 500 keV energy and fluences ranging from 1.1×10^(15)ions∕cm^(2)to 3.5×10^(17)ions∕cm^(2)were used to simulate neutron irradiation at 300 K.The samples with an irradiation fluence of 3.5×10^(16)ions∕cm^(2)were subjected to isochronal annealing at different temperatures(573 K,873 K and 1173 K)for 3 h.The Raman results revealed that the D peak gradually increased,whereas the intrinsic G peak decreased with increasing irradiation fluence.At the same irradiation fluence,the D peak gradually decreased,whereas the intrinsic G peak increased with increasing annealing temperature.Slow positron beam analysis demonstrated that the density or size of irradiation defects(vacancy type)increased with higher irradiation fluence,but decreased rapidly with increasing annealing temperature.The Raman spectral analysis of sample cross sections subjected to high irradiation fluences revealed the emergence of amorphization precisely at the depth where ion damage was most pronounced,whereas the surface retained its crystalline structure.Raman and positron annihilation analyses indicated that the matrix graphite exhibited good irradiation resistance to He ions at 300 K.However,vacancy-type defects induced by He ion irradiation exhibit poor thermal stability and can be easily removed during annealing.展开更多
As an alternative to lithium-ion batteries,aqueous zinc-graphite batteries(ZnGBs)are being explored as safer and low-cost options with the expectation of scalability to large energy storage systems.However,the current...As an alternative to lithium-ion batteries,aqueous zinc-graphite batteries(ZnGBs)are being explored as safer and low-cost options with the expectation of scalability to large energy storage systems.However,the currently adopted polyatomic and metal complex anion intercalation process at the graphite electrode in ZnGB exhibits poor electrochemical performances.Alternatively,incorporating halogen anions offers exceptional electrochemical performance to graphite electrodes due to their redox process.In this work,ZnGBs are assembled using a LiCl/ZnCl2/KBr^(-)based water-in-salt electrolyte,which efficiently supplies bromide(Br^(−))ions for conversion into Br_(x)^(−)and facilitates Br_(2)intercalation at the graphite electrode.The conversion and intercalation of bromine together enable the ZnGB to achieve a discharge capacity of 2.73 mAh/cm^(2)with 91.0%of coulombic efficiency(CE)while supporting high current density operations of up to 150 mA/cm^(2).With high energy density(4.56 Wh/cm^(2)),high power density(199.5 mW/cm^(2)),and excellent rate capability(∼93.0%CE at 150 mA/cm^(2)),the ZnGB is shown to operate efficiently for as much as 800 cycles.Beguilingly,an anode-free ZnGB offers enhanced stability for up to 1100 cycles without performance decay,matching the electrochemical performance of Zn metal electrodes.This work provides insights into the bromine reaction mechanism at graphite electrodes and the role of surface exfoliation in enabling efficient Br_(x)^(−)formation,along with Br_(2)intercalation,for achieving high-performance ZnGBs.展开更多
Although graphite(G)materials dominate the commercial lithium-ion battery(LIBs)anode market due to their excellent overall performance,their limited rate performance and cycle life hinder applications in highperforman...Although graphite(G)materials dominate the commercial lithium-ion battery(LIBs)anode market due to their excellent overall performance,their limited rate performance and cycle life hinder applications in highperformance fields.To improve the cycling and rate performance of graphite anodes,this study first employed economical and eco-friendly tannic acid(TA)as a carbon coating precursor to coat graphite surfaces viaπ-πstacking interactions.In an oxygen-rich alkaline environment,tannic acid undergoes oxidation polymerization and crosslinks with formaldehyde to form a polymer matrix that coats the graphite surface.After subsequent carbonization,carbon-coated graphite material(G@C)was successfully synthesized.Carbon coatings on graphite effectively lower LIB resistance,enhance lithium-ion diffusion,and prevent exfoliation during cycling,thereby significantly boosting rate performance and prolonging the cycle life of graphite.After 500 cycles at 2C,the specific capacity of G@C was 103.7 mAh g^(-1),with a retention of 89%.However,G exhibited only 68.7 mAh g^(-1) and 85%retention under identical conditions.This carbon-coated graphite modification strategy offers a novel,green,and economical approach for designing and tailoring graphite anode materials for lithium-ion batteries with long cycle life and high rate.展开更多
The operational lifespan of nuclear graphite is significantly affected by irradiation creep,yet the microstructural mechanism underlying this creep phenomenon remains unclear.Some theories attempt to link microstructu...The operational lifespan of nuclear graphite is significantly affected by irradiation creep,yet the microstructural mechanism underlying this creep phenomenon remains unclear.Some theories attempt to link microstructural evolution with creep behavior,but the rapid migration rate of defects under irradiation and loading makes it difficult to capture the specific evolution process experimentally,resulting in a lack of direct structural evidence.Therefore,in this study,molecular dynamics simulations are employed to investigate the irradiation behavior and microstructural migration under external loading.The aim is to provide microstructural evidence for theories such as the dislocation pinning-unpinning and crystal yielding.The results demonstrate that high tensile loads can increase the potential energy and reduce threshold displacement energy of graphite crystals.Consequently,displacement damage probability and creep rate increase,which is not considered in previous theories.Meanwhile,different creep mechanisms are observed at different damage states and applied loads.In low-dose damage states dominated by interstitials and vacancies,the pinning-unpinning process at basal plane may be caused by a defect diffusion mode.Under high stress levels,direct breaking of pinning structures occurs,leading to rapid migration of basal planes,demonstrating the microstructural evolution process of irradiated crystal yielding and plastic flow.In high-dose damage states characterized significantly by amorphous components,short-range atomic diffusion can become the dominant creep mechanism,and diffusion along the c-axis of graphite crystals is no longer constrained.These findings provide a crucial reference for understanding the irradiation and creep behavior of nuclear graphite in reactors.展开更多
Identifying the damage and fracture properties of nuclear graphite materials and accurately simulating them are crucial when designing graphite core structures.To simulate the damage evolution and crack propagation of...Identifying the damage and fracture properties of nuclear graphite materials and accurately simulating them are crucial when designing graphite core structures.To simulate the damage evolution and crack propagation of graphite under stress in a finite element model,compression tests on disks and three-point bending tests on center-notched beams for fine-grained graphite(CDI-1D and IG11 graphite)were conducted.During these tests,digital image correlation and electronic speckle pattern interferometry techniques were utilized to observe the surface full-field displacements of the specimens.A segmented finite element inverse analysis method was developed to characterize the graphite’s damage evolution by quantifying the reduction in Young’s modulus with tensile and compressive strains in disk specimens.The fracture energy and bilinear tensile softening curve of the graphite were determined by comparing the load–displacement responses of the three-point bending tests and the finite element simulation.Finally,by combining the identified damage laws with a fracture criterion based on fracture energy,a damage–fracture model was established and used to simulate tensile tests on L-shaped specimens with different fillet radii.Simulations indicate that the damage area at the fillet expands with increasing radius,creating a blunting effect that enhances the load-bearing capacity of the specimens.This damage–fracture model can be applied to simulate graphite components in core structures.展开更多
In order to avoid poor machinability caused by excessive hardness under high-silicon conditions in the traditional free-cutting graphited steel,it is important to develop a suitable silicon-saving,aluminum-containing ...In order to avoid poor machinability caused by excessive hardness under high-silicon conditions in the traditional free-cutting graphited steel,it is important to develop a suitable silicon-saving,aluminum-containing free-cutting steel.This study investigated the microstructure and graphite precipitation behavior of Fe–0.58C–1.0Al(wt%)steels with varying silicon contents(0.55wt%–2.67wt%)after tempering at different temperatures(680℃,715℃).The tempering structure and the precipitation behavior of graphite and Fe_(3)C in Fe–0.58C–1.0Al steels were systematically studied by optical microscopy(OM),field emission scanning electron microscopy(FESEM),and electron microprobe analyzer(EPMA).The results showed that,at both tempering temperatures,the microstructure of 0.55wt%Si steel is ferrite+granular Fe_(3)C,and the microstructures of 1.38wt%–2.67wt%Si steels are ferrite+petaloid graphite+granular Fe_(3)C.With increasing Si content from 1.38wt%to 2.67wt%at constant tempering temperature,the number density of graphite particles increases,though their average size decreases.Meanwhile,the number density and average size of Fe_(3)C in experimental steels continuously decrease with the increase of Si content.For 0.55wt%Si steel without graphite precipitation,increasing tempering temperature promotes the accumulation and growth of Fe_(3)C.For 1.38wt%–2.67wt%Si steels with graphite precipitation,higher tempering temperature promotes graphite particles growth while accelerating the decomposition and refinement of Fe_(3)C.Furthermore,compared with the experimental steels containing 0.55wt%Si,1.38wt%Si,and 2.67wt%Si,the 1.89wt%Si steel exhibits significantly lower hardness.Especially,when tempered at 715℃,Fe–0.58C–1.0Al steel with 1.89wt%Si exhibits enhanced graphitization behavior and reduced hardness,which is nearly HV 20 lower than previously reported Fe–0.55C–2.33Si steel.展开更多
Poor Li plating reversibility and high thermal runaway risks are key challenges for fast charging lithiumion batteries with graphite anodes.Herein,a dielectric and fire-resistant separator based on hybrid nanofibers o...Poor Li plating reversibility and high thermal runaway risks are key challenges for fast charging lithiumion batteries with graphite anodes.Herein,a dielectric and fire-resistant separator based on hybrid nanofibers of barium sulfate(BS)and bacterial cellulose(BC)is developed to synchronously enhance the battery's fast charging and thermal-safety performances.The regulation mechanism of the dielectric BS/BC separator in enhancing the Li^(+)ion transport and Li plating reversibility is revealed.(1)The Max-Wagner polarization electric field of the dielectric BS/BC separator can accelerate the desolvation of solvated Li^(+)ions,enhancing their transport kinetics.(2)Moreover,due to the charge balancing effect,the dielectric BS/BC separator homogenizes the electric field/Li^(+)ion flux at the graphite anode-separator interface,facilitating uniform Li plating and suppressing Li dendrite growth.Consequently,the fast-charge graphite anode with the BS/BC separator shows higher Coulombic efficiency(99.0%vs.96.9%)and longer cycling lifespan(100 cycles vs.59 cycles)than that with the polypropylene(PP)separator in the constantlithiation cycling test at 2 mA cm^(-2).The high-loading LiFePO4(15.5 mg cm^(-2))//graphite(7.5 mg cm^(-2))full cell with the BS/BC separator exhibits excellent fast charging performance,retaining 70%of its capacity after 500 cycles at a high rate of 2C,which is significantly better than that of the cell with the PP separator(retaining only 27%of its capacity after 500 cycles).More importantly,the thermally stable BS/BC separator effectively elevates the critical temperature and reduces the heat release rate during thermal runaway,thereby significantly enhancing the battery's safety.展开更多
基金supported by the Shanxi Province Central Guidance Fund for Local Science and Technology Development Project(YDZJSX2024D030)the National Natural Science Foundation of China(22075197,22278290)+2 种基金the Shanxi Province Key Research and Development Program Project(2021020660301013)the Shanxi Provincial Natural Science Foundation of China(202103021224079)the Research and Development Project of Key Core and Common Technology of Shanxi Province(20201102018).
文摘The advancement of planar micro-supercapacitors(PMSCs)for micro-electromechanical systems(MEMS)has been significantly hindered by the challenge of achieving high energy and power densities.This study addresses this issue by leveraging screen-printing technology to fabricate high-performance PMSCs using innovative composite ink.The ink,a synergistic blend of few-layer graphene(Gt),carbon black(CB),and NiCo_(2)O_(4),was meticulously mixed to form a conductive and robust coating that enhanced the capacitive performance of the PMSCs.The optimized ink formulation and printing process result in a micro-supercapacitor with an exceptional areal capacitance of 18.95 mF/cm^(2)and an areal energy density of 2.63μW·h/cm^(2)at a current density of 0.05 mA/cm^(2),along with an areal power density of 0.025 mW/cm^(2).The devices demonstrated impressive durability with a capacitance retention rate of 94.7%after a stringent 20000-cycle test,demonstrating their potential for long-term applications.Moreover,the PMSCs displayed excellent mechanical flexibility,with a capacitance decrease of only 3.43%after 5000 bending cycles,highlighting their suitability for flexible electronic devices.The ease of integrating these PMSCs into series and parallel configurations for customized power further underscores their practicality for integrated power supply solutions in various technologies.
基金the National Natural Science Foundation of China(Grant Nos.11874160,12141401,and 11534001)the National Key Research and Development Program of China(Grant No.2017YFA0403501)the Fundamental Research Funds for the Central Universities(HUST:2017KFYXJJ027).
文摘We report that the twisted few layer graphite(tFL-graphite)is a new family of moiréheterostructures(MHSs),which has richer and highly tunable moiréflat band structures entirely distinct from all the known MHSs.A tFL-graphite is composed of two few-layer graphite(Bernal stacked multilayer graphene),which are stacked on each other with a small twisted angle.The moiréband structure of the tFL-graphite strongly depends on the layer number of its composed two van der Waals layers.Near the magic angle,a tFL-graphite always has two nearly flat bands coexisting with a few pairs of narrowed dispersive(parabolic or linear)bands at the Fermi level,thus,enhances the DOS at EF.This coexistence property may also enhance the possible superconductivity as been demonstrated in other multiband superconductivity systems.Therefore,we expect strong multiband correlation effects in tFL-graphite.Meanwhile,a proper perpendicular electric field can induce several isolated nearly flat bands with nonzero valley Chern number in some simple tFL-graphites,indicating that tFL-graphite is also a novel topological flat band system.
基金supported by European Union's Horizon Europe,UK Research and Innovation(UKRI).
文摘Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.
基金supported by the National Key Research and Development Program of China(2024YFA1612900)the National Natural Science Foundation of China(Grant No.52103365 and No.12375270)the Guangdong Innovative and Entrepreneurial Research Team Program,China(Grant No.2021ZT09L227).
文摘Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.NRF-2021M3H4A1A02048529)the Ministry of Trade,Industry and Energy(MOTIE)of the Korean government under grant No.RS-2022-00155854support from the DGIST Supercomputing and Big Data Center.
文摘To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.
基金supported by the National Natural Science Foundation of China(Nos.21271082 and 21371068)。
文摘In this paper,we introduced a novel method to prepare the few-layer nitrogen-doped graphene(FNG)from expandable graphite with melamine.The super-capacitive properties of FNG were thoroughly characterized by a three-electrode system,and the results showed the FNG electrode achieved a specific capacitance as high as 83.8 mF/cm2 together with excellent cycling stability.This method could be a novel approach to combine the pseudo-capacitors and electric double layer capacitors.
基金supported by National Natural Science Foundation of China(52302034,52402060,52202201,52021006)Beijing National Laboratory for Molecular Sciences(BNLMS-CXTD202001)+1 种基金Shenzhen Science and Technology Innovation Commission(KQTD20221101115627004)China Postdoctoral Science Foundation(2024T170972)。
文摘Graphdiyne(GDY)is a two-dimensional carbon allotrope with exceptional physical and chemical properties that is gaining increasing attention.However,its efficient and scalable synthesis remains a significant challenge.We present a microwave-assisted approach for its continuous,large-scale production which enables synthesis at a rate of 0.6 g/h,with a yield of up to 90%.The synthesized GDY nanosheets have an average diameter of 246 nm and a thickness of 4 nm.We used GDY as a stable coating for potassium(K)metal anodes(K@GDY),taking advantage of its unique molecular structure to provide favorable paths for K-ion transport.This modification significantly inhibited dendrite formation and improved the cycling stability of K metal batteries.Full-cells with perylene-3,4,9,10-tetracarboxylic dianhydride(PTCDA)cathodes showed the clear superiority of the K@GDY anodes over bare K anodes in terms of performance,stability,and cycle life.The K@GDY maintained a stable voltage plateau and gave an excellent capacity retention after 600 cycles with nearly 100%Coulombic efficiency.This work not only provides a scalable and efficient way for GDY synthesis but also opens new possibilities for its use in energy storage and other advanced technologies.
基金Funded by Scientific and Technological Innovation Project of Carbon Emission Peak and Carbon Neutrality of Jiangsu Province(No.BE2022028-4)。
文摘We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) changed from 0.5:1 to 4:1,and the impregnation time changed from 1 to 7 h.The typical composite phase change thermal storage materials doped with the as-treated graphite were fabricated using form-stable technique.To investigate the oxidation and anti-oxidation behavior of the impregnated graphite at high temperatures,the samples were put into a muffle furnace for a cyclic heat test.Based on SEM,EDS,DSC techniques,analyses on the impregnated technique suggested an optimized processing conditions of a 3 h impregnation time with the ratio of graphite:Al(H_(2)PO_(4))_(3) as 1:3 for graphite impregnation treatment.Further investigations on high-temperature phase change heat storage materials doped by the treated graphite suggested excellent oxidation resistance and thermal cycling performance.
文摘Lithium-ion batteries(LIBs)are an electrochemical energy storage technology that has been widely used for portable electrical devices,electric vehicles,and grid storage,etc.To satisfy the demand for user convenience especially for electric vehicles,the development of a fast-charging technology for LIBs has become a critical focus.In commercial LIBs,the slow kinetics of Li+intercalation into the graphite anode from the electrolyte solution is known as the main restriction for fast-charging.We summarize the recent advances in obtaining fast-charging graphite-based anodes,mainly involving modifications of the electrolyte solution and graphite anode.Specifically,strategies for increasing the ionic conductivity and regulating the Li+solvation/desolvation state in the electrolyte solution,as well as optimizing the fabrication and the intrinsic activity of graphite-based anodes are discussed in detail.This review considers practical ways to obtain fast Li+intercalation kinetics into a graphite anode from the electrolyte as well as analysing progress in the commercialization of fast-charging LIBs.
基金National Key Research and Development Program of China(2024YFB3714804)National Natural Science Foundation of China(52171277)+1 种基金Baima Lake Laboratory Joint Funds of the Zhejiang Provincial Natural Science Foundation of China(LBMHZ24E020001)Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(2022SZ-TD006).
文摘Magnesium potassium phosphate cement(MKPC)coatings exhibit potential for carbon steel protection but face challenges in practical application due to the preparation process and properties.This study develops flake graphite(FG)-modified MKPC coatings via spraying process,investigating the effects of FG size and dosage on phase composition,microstructure,mechanical properties,corrosion protection,and thermal conductivity.Results show that a low FG dosage(5 wt%)synergistically optimizes multifunctional performance.Compared to unmodified MKPC,FG2-1 exhibited exceptional impact resistance,associated with a 57%reduction in corrosion current density(icorr),a 356.3% increase in low-frequency impedance modulus(Z_(0.01 Hz))and a 37% increase in thermal conductivity.However,the coating with a high FG dosage(15 wt%)degraded performance due to defect accumulation and reduced crystallinity of KMgPO_(4)·6H_(2)O.This work advances the rational design of multifunctional inorganic coatings for extreme service environments requiring coupled corrosion protection and thermal management.
基金Natural Science Foundation of Shanghai(24ZR1400800)he Natural Science Foundation of China(U23A20685,52073058,91963204)+1 种基金the National Key R&D Program of China(2021YFB3701400)Shanghai Sailing Program(23YF1400200)。
文摘High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production method relies on repeated impregnation-carbonization and graphitization,and is plagued by lengthy preparation cycles and high energy consumption.Phase transition-assisted self-pressurized selfsintering technology can rapidly produce high-strength graphite materials,but the fracture strain of the graphite materials produced is poor.To solve this problem,this study used a two-step sintering method to uniformly introduce micro-nano pores into natural graphite-based bulk graphite,achieving improved fracture strain of the samples without reducing their density and mechanical properties.Using natural graphite powder,micron-diamond,and nano-diamond as raw materials,and by precisely controlling the staged pressure release process,the degree of diamond phase transition expansion was effectively regulated.The strain-to-failure of the graphite samples reached 1.2%,a 35%increase compared to samples produced by fullpressure sintering.Meanwhile,their flexural strength exceeded 110 MPa,and their density was over 1.9 g/cm^(3).The process therefore produced both a high strength and a high fracture strain.The interface evolution and toughening mechanism during the two-step sintering process were investigated.It is believed that the micro-nano pores formed have two roles:as stress concentrators they induce yielding by shear and as multi-crack propagation paths they significantly lengthen the crack propagation path.The two-step sintering phase transition strategy introduces pores and provides a new approach for increasing the fracture strain of brittle materials.
文摘CeO_(2) based semiconductor are widely used in solar-driven photothermal catalytic dry reforming of methane(DRM)reaction,but still suffer from low activity and low light utilization efficiency.This study developed graphite-CeO_(2) interfaces to enhance solar-driven photothermal catalytic DRM.Compared with carbon nanotubes-modified CeO_(2)(CeO_(2)-CNT),graphite-modified CeO_(2)(CeO_(2)-GRA)constructed graphite-CeO_(2) interfaces with distortion in CeO_(2),leading to the formation abundant oxygen vacancies.These graphite-CeO_(2) interfaces with oxygen vacancies enhanced optical absorption and promoted the generation and separation of photogenerated carriers.The high endothermic capacity of graphite elevated the catalyst surface temperature from 592.1−691.3℃,boosting light-to-thermal conversion.The synergy between photogenerated carriers and localized heat enabled Ni/CeO_(2)-GRA to achieve a CO production rate of 9985.6 mmol/(g·h)(vs 7192.4 mmol/(g·h)for Ni/CeO_(2))and a light-to-fuel efficiency of 21.8%(vs 13.8%for Ni/CeO_(2)).This work provides insights for designing graphite-semiconductor interfaces to advance photothermal catalytic efficiency.
基金supported by the National Natural Science Foundation of China(Nos.12005289,52072397)State Key Laboratory of Nuclear Detection and Electronics,University of Science and Technology of China(SKLPDE-KF-202316).
文摘The stability of matrix graphite under neutron irradiation and in corrosive environments is crucial for the safe operation of molten salt reactors(MSRs).Raman spectroscopy and a slow positron beam were employed to investigate the effects of He ion irradiation fluences and subsequent annealing on the microstructure and defects of the matrix graphite.He ions with 500 keV energy and fluences ranging from 1.1×10^(15)ions∕cm^(2)to 3.5×10^(17)ions∕cm^(2)were used to simulate neutron irradiation at 300 K.The samples with an irradiation fluence of 3.5×10^(16)ions∕cm^(2)were subjected to isochronal annealing at different temperatures(573 K,873 K and 1173 K)for 3 h.The Raman results revealed that the D peak gradually increased,whereas the intrinsic G peak decreased with increasing irradiation fluence.At the same irradiation fluence,the D peak gradually decreased,whereas the intrinsic G peak increased with increasing annealing temperature.Slow positron beam analysis demonstrated that the density or size of irradiation defects(vacancy type)increased with higher irradiation fluence,but decreased rapidly with increasing annealing temperature.The Raman spectral analysis of sample cross sections subjected to high irradiation fluences revealed the emergence of amorphization precisely at the depth where ion damage was most pronounced,whereas the surface retained its crystalline structure.Raman and positron annihilation analyses indicated that the matrix graphite exhibited good irradiation resistance to He ions at 300 K.However,vacancy-type defects induced by He ion irradiation exhibit poor thermal stability and can be easily removed during annealing.
基金The authors acknowledge the University of Sharjah for financial support through a competitive research project grant(project number:23020406277)。
文摘As an alternative to lithium-ion batteries,aqueous zinc-graphite batteries(ZnGBs)are being explored as safer and low-cost options with the expectation of scalability to large energy storage systems.However,the currently adopted polyatomic and metal complex anion intercalation process at the graphite electrode in ZnGB exhibits poor electrochemical performances.Alternatively,incorporating halogen anions offers exceptional electrochemical performance to graphite electrodes due to their redox process.In this work,ZnGBs are assembled using a LiCl/ZnCl2/KBr^(-)based water-in-salt electrolyte,which efficiently supplies bromide(Br^(−))ions for conversion into Br_(x)^(−)and facilitates Br_(2)intercalation at the graphite electrode.The conversion and intercalation of bromine together enable the ZnGB to achieve a discharge capacity of 2.73 mAh/cm^(2)with 91.0%of coulombic efficiency(CE)while supporting high current density operations of up to 150 mA/cm^(2).With high energy density(4.56 Wh/cm^(2)),high power density(199.5 mW/cm^(2)),and excellent rate capability(∼93.0%CE at 150 mA/cm^(2)),the ZnGB is shown to operate efficiently for as much as 800 cycles.Beguilingly,an anode-free ZnGB offers enhanced stability for up to 1100 cycles without performance decay,matching the electrochemical performance of Zn metal electrodes.This work provides insights into the bromine reaction mechanism at graphite electrodes and the role of surface exfoliation in enabling efficient Br_(x)^(−)formation,along with Br_(2)intercalation,for achieving high-performance ZnGBs.
基金supported by the Science and Technology Projects of the State Grid Corporation of China(5500-202323102A-1-1-ZN).
文摘Although graphite(G)materials dominate the commercial lithium-ion battery(LIBs)anode market due to their excellent overall performance,their limited rate performance and cycle life hinder applications in highperformance fields.To improve the cycling and rate performance of graphite anodes,this study first employed economical and eco-friendly tannic acid(TA)as a carbon coating precursor to coat graphite surfaces viaπ-πstacking interactions.In an oxygen-rich alkaline environment,tannic acid undergoes oxidation polymerization and crosslinks with formaldehyde to form a polymer matrix that coats the graphite surface.After subsequent carbonization,carbon-coated graphite material(G@C)was successfully synthesized.Carbon coatings on graphite effectively lower LIB resistance,enhance lithium-ion diffusion,and prevent exfoliation during cycling,thereby significantly boosting rate performance and prolonging the cycle life of graphite.After 500 cycles at 2C,the specific capacity of G@C was 103.7 mAh g^(-1),with a retention of 89%.However,G exhibited only 68.7 mAh g^(-1) and 85%retention under identical conditions.This carbon-coated graphite modification strategy offers a novel,green,and economical approach for designing and tailoring graphite anode materials for lithium-ion batteries with long cycle life and high rate.
基金supported the Science and Technology Commission of Shanghai Municipality(No.21DZ2206900)。
文摘The operational lifespan of nuclear graphite is significantly affected by irradiation creep,yet the microstructural mechanism underlying this creep phenomenon remains unclear.Some theories attempt to link microstructural evolution with creep behavior,but the rapid migration rate of defects under irradiation and loading makes it difficult to capture the specific evolution process experimentally,resulting in a lack of direct structural evidence.Therefore,in this study,molecular dynamics simulations are employed to investigate the irradiation behavior and microstructural migration under external loading.The aim is to provide microstructural evidence for theories such as the dislocation pinning-unpinning and crystal yielding.The results demonstrate that high tensile loads can increase the potential energy and reduce threshold displacement energy of graphite crystals.Consequently,displacement damage probability and creep rate increase,which is not considered in previous theories.Meanwhile,different creep mechanisms are observed at different damage states and applied loads.In low-dose damage states dominated by interstitials and vacancies,the pinning-unpinning process at basal plane may be caused by a defect diffusion mode.Under high stress levels,direct breaking of pinning structures occurs,leading to rapid migration of basal planes,demonstrating the microstructural evolution process of irradiated crystal yielding and plastic flow.In high-dose damage states characterized significantly by amorphous components,short-range atomic diffusion can become the dominant creep mechanism,and diffusion along the c-axis of graphite crystals is no longer constrained.These findings provide a crucial reference for understanding the irradiation and creep behavior of nuclear graphite in reactors.
基金supported by the National Natural Science Foundation of China(No.52278251)Guizhou Provincial Sciences and Technology Projects(ZK[2022]Key 007).
文摘Identifying the damage and fracture properties of nuclear graphite materials and accurately simulating them are crucial when designing graphite core structures.To simulate the damage evolution and crack propagation of graphite under stress in a finite element model,compression tests on disks and three-point bending tests on center-notched beams for fine-grained graphite(CDI-1D and IG11 graphite)were conducted.During these tests,digital image correlation and electronic speckle pattern interferometry techniques were utilized to observe the surface full-field displacements of the specimens.A segmented finite element inverse analysis method was developed to characterize the graphite’s damage evolution by quantifying the reduction in Young’s modulus with tensile and compressive strains in disk specimens.The fracture energy and bilinear tensile softening curve of the graphite were determined by comparing the load–displacement responses of the three-point bending tests and the finite element simulation.Finally,by combining the identified damage laws with a fracture criterion based on fracture energy,a damage–fracture model was established and used to simulate tensile tests on L-shaped specimens with different fillet radii.Simulations indicate that the damage area at the fillet expands with increasing radius,creating a blunting effect that enhances the load-bearing capacity of the specimens.This damage–fracture model can be applied to simulate graphite components in core structures.
基金supports by the National Natural Science Foundation of China(No.52274311)the Natural Science Research Project of Anhui Educational Committee,China(No.2023AH051081).
文摘In order to avoid poor machinability caused by excessive hardness under high-silicon conditions in the traditional free-cutting graphited steel,it is important to develop a suitable silicon-saving,aluminum-containing free-cutting steel.This study investigated the microstructure and graphite precipitation behavior of Fe–0.58C–1.0Al(wt%)steels with varying silicon contents(0.55wt%–2.67wt%)after tempering at different temperatures(680℃,715℃).The tempering structure and the precipitation behavior of graphite and Fe_(3)C in Fe–0.58C–1.0Al steels were systematically studied by optical microscopy(OM),field emission scanning electron microscopy(FESEM),and electron microprobe analyzer(EPMA).The results showed that,at both tempering temperatures,the microstructure of 0.55wt%Si steel is ferrite+granular Fe_(3)C,and the microstructures of 1.38wt%–2.67wt%Si steels are ferrite+petaloid graphite+granular Fe_(3)C.With increasing Si content from 1.38wt%to 2.67wt%at constant tempering temperature,the number density of graphite particles increases,though their average size decreases.Meanwhile,the number density and average size of Fe_(3)C in experimental steels continuously decrease with the increase of Si content.For 0.55wt%Si steel without graphite precipitation,increasing tempering temperature promotes the accumulation and growth of Fe_(3)C.For 1.38wt%–2.67wt%Si steels with graphite precipitation,higher tempering temperature promotes graphite particles growth while accelerating the decomposition and refinement of Fe_(3)C.Furthermore,compared with the experimental steels containing 0.55wt%Si,1.38wt%Si,and 2.67wt%Si,the 1.89wt%Si steel exhibits significantly lower hardness.Especially,when tempered at 715℃,Fe–0.58C–1.0Al steel with 1.89wt%Si exhibits enhanced graphitization behavior and reduced hardness,which is nearly HV 20 lower than previously reported Fe–0.55C–2.33Si steel.
基金financially supported by the National Natural Science Foundation of China(Grant No.52202328,52372099)the Shanghai Sailing Program(22YF1455500).
文摘Poor Li plating reversibility and high thermal runaway risks are key challenges for fast charging lithiumion batteries with graphite anodes.Herein,a dielectric and fire-resistant separator based on hybrid nanofibers of barium sulfate(BS)and bacterial cellulose(BC)is developed to synchronously enhance the battery's fast charging and thermal-safety performances.The regulation mechanism of the dielectric BS/BC separator in enhancing the Li^(+)ion transport and Li plating reversibility is revealed.(1)The Max-Wagner polarization electric field of the dielectric BS/BC separator can accelerate the desolvation of solvated Li^(+)ions,enhancing their transport kinetics.(2)Moreover,due to the charge balancing effect,the dielectric BS/BC separator homogenizes the electric field/Li^(+)ion flux at the graphite anode-separator interface,facilitating uniform Li plating and suppressing Li dendrite growth.Consequently,the fast-charge graphite anode with the BS/BC separator shows higher Coulombic efficiency(99.0%vs.96.9%)and longer cycling lifespan(100 cycles vs.59 cycles)than that with the polypropylene(PP)separator in the constantlithiation cycling test at 2 mA cm^(-2).The high-loading LiFePO4(15.5 mg cm^(-2))//graphite(7.5 mg cm^(-2))full cell with the BS/BC separator exhibits excellent fast charging performance,retaining 70%of its capacity after 500 cycles at a high rate of 2C,which is significantly better than that of the cell with the PP separator(retaining only 27%of its capacity after 500 cycles).More importantly,the thermally stable BS/BC separator effectively elevates the critical temperature and reduces the heat release rate during thermal runaway,thereby significantly enhancing the battery's safety.
