Based on the proper assumptions and approximations, the coupling mechanism of the electromagnetic acoustic transducer (EMAT) for ultrasonic generation within ferromagnetic material was studied by analyzing the eddy cu...Based on the proper assumptions and approximations, the coupling mechanism of the electromagnetic acoustic transducer (EMAT) for ultrasonic generation within ferromagnetic material was studied by analyzing the eddy current distribution, Lorentz force, magnetostriction force and magnetization force. Some useful numerical calculations are presented to explain the EMAT behavior with general geometric arrangements. It is indicated that for the ferromagnetic material the magnetostriction effect dominates the EMAT phenomenon for ultrasonic wave generation in low magnetic field intensity, while the material does not reach its magnetizing saturation. But, with the increase of the bias magnetic field and saturation, the magnetostrictive terms will make no contributions to the ultrasonic generation and the Lorentz force becomes the only exciting mechanism. It is important to determine both the Lorentz and magnetostriction forces and select the appropriate working manner for achieving an optimized design.展开更多
FLUENT and ANSYS codes are used to solve the magnethydrodynamics （MHD） equations and electromagnetic field equations, respectively. An interface code is developed to implement the bi-direction transfer of calculatio...FLUENT and ANSYS codes are used to solve the magnethydrodynamics （MHD） equations and electromagnetic field equations, respectively. An interface code is developed to implement the bi-direction transfer of calculation data between FLUENT and ANSYS. Then a 2-D MHD arc model is built up with the consideration of the nonlinear ferromagnetic material. The arc shape, gas flow velocity and magnetic field distribution are presented at a current of 200 A. The influence of the number of splitter plates on arc motion is also analyzed.展开更多
Magnetic Barkhausen Noise(MBN) method is known as an effective nondestructive evaluation(NDE) method for evaluation of residual stress in ferromagnetic materials. Some studies on the feasibility of the MBN method for ...Magnetic Barkhausen Noise(MBN) method is known as an effective nondestructive evaluation(NDE) method for evaluation of residual stress in ferromagnetic materials. Some studies on the feasibility of the MBN method for NDE of residual strains were also conducted and found applicable. However, these studies are mainly focused on the state of residual strains which were introduced through a one-cycle-loading process. In practice, however, structures may suffer from an unpredictable and complicated loading history, i.e., the final state of plastic strain may be induced by several times of large loads. Whether the loading history has influences on MBN signals or not is of great importance for the practical application of the MBN method. In this paper, several ferromagnetic specimens with the same final state of residual strain but of different loading history were fabricated and inspected by using a MBN testing system. The experimental results reveal that the loading history has a significant influence on the detected MBN signals especially for a residual strain in range less than 1%, which doubts the feasibility to apply the MBN method simply in the practical environment. In addition, micro-observations on the magnetic domain structures of the plastic damaged specimens were also carried out to clarify the influence mechanism of loading history on the MBN signals.展开更多
The transient response in a bi-material cylinder of soft ferromagnetic material under magnetic shock is investigated in this study.The analytical solutions for displacement and stress have been derived using the finit...The transient response in a bi-material cylinder of soft ferromagnetic material under magnetic shock is investigated in this study.The analytical solutions for displacement and stress have been derived using the finite Hankel transform and the Laplace transform.The numerical examples show that the displacement and stress fields respond dynamically in the bi-material cylinder under magnetic shock.The derived displacement at the center and radial stress on the surface of the cylinder satisfy the boundary conditions,showing the correctness of calculation.The displacement and stress waves propagate from the surface to the center of the cylinder when the magnetic field is loaded.The stress fields increase from the center to the surface of the cylinder and are much larger than the quasi-static state since the waves reflect,collide and concentrate in the body of the cylinder.The method of this paper can be used in the design of soft ferromagnetic structures.展开更多
Magnetic Barkhausen Noise (MBN) is a phenomenon of electromagnetic energy emission due to the movement of magnetic domain walls inside ferromagnetic materials when they are locally magnetized by an alternating magneti...Magnetic Barkhausen Noise (MBN) is a phenomenon of electromagnetic energy emission due to the movement of magnetic domain walls inside ferromagnetic materials when they are locally magnetized by an alternating magnetic field. According to Faraday’s law of electromagnetic induction, the noise can be received by the coil attached to the surface of the material being magnetized and the noise carries the message of the characteristics of the material such as stresses, hardness, phase content, etc. Based on the characteristic of the noise, research about the relationship between the welding stresses in the welding assembly and the noise, the fatigue damage of the plate structure and the noise, and the influence of heat treatment and the variation of phase content to the noise are carried out in this paper.展开更多
This paper focuses on mathematical models describing the mechanical behavior of ferromagnetic materials under magnetization. Through combination of the electromagnetic field theory with the theory of elastic mechanics...This paper focuses on mathematical models describing the mechanical behavior of ferromagnetic materials under magnetization. Through combination of the electromagnetic field theory with the theory of elastic mechanics, several nonlinear systems of fourth order partial differential equations were deduced. By making further assumption, the first-order approximation of the above equations was established, of which the solutions are good enough for engineering application.展开更多
We present a detailed theoretical analysis on the possibilities and conditions for negative permeability and negative refraction occuring in the magnetic materials with both pronounced magnetic and dielectric response...We present a detailed theoretical analysis on the possibilities and conditions for negative permeability and negative refraction occuring in the magnetic materials with both pronounced magnetic and dielectric responses to electromagnetic waves. The results indicate that the permeability is always positive for 5 = （2q ＋0.5）π （5 is the initial phase difference of magnetic components hx and hy of incident electromagnetic wave, q is integer）, which means that it is difficult to realize negative refraction. However, for 5 = 2qπ, 5 = （2q ＋ 1）π, or 5 = （2q - 0.5）π, the negative permeability occurs at some range of free procession frequency, which means that the refraction can become negative under certain conditions. Further analysis reveals that for general positive permittivity there are various opportunities for realizing the negative refraction provided that some requirements are met. One concludes also that the refractive index for δ = 2qπ case is similar to 5 = （2q ＋ 1）π The only difference between two cases of δ = 2qπ and 5 = （2q ＋ 1）π is that the x-direction for δ = 2qπ corresponds to the y-direction for 5 = （2q ＋ 1）π and the y-direction for 5 = 2qπ corresponds to the x-direction for δ = （2q ＋ 1）π. The results are valuable for designing and analysing the complex negative refraction of magnetic materials.展开更多
Due to the small size,active mobility,and intrinsic softness,miniature soft robots hold promising po-tentials in reaching the deep region inside living bodies otherwise inaccessible with compelling agility,adaptabilit...Due to the small size,active mobility,and intrinsic softness,miniature soft robots hold promising po-tentials in reaching the deep region inside living bodies otherwise inaccessible with compelling agility,adaptability and safety.Various materials and actuation strategies have been developed for creating soft robots,among which,ferromagnetic soft materials that self-actuate in response to external magnetic fields have attracted worldwide attention due to their remote controllability and excellent compatibil-ity with biological tissues.This review presents comprehensive and systematic research advancements in the design,fabrication,and applications of ferromagnetic soft materials for miniature robots,providing in-sights into their potential use in biomedical fields and beyond.The programming strategies of ferromag-netic soft materials are summarized and classified,including mold-assisted programming,3D printing-assisted programming,microassembly-assisted programming,and magnetization reprogramming.Each approach possesses unique advantages in manipulating the magnetic responsiveness of ferromagnetic soft materials to achieve outstanding actuation and deformation performances.We then discuss the biomedi-cal applications of ferromagnetic soft material-based soft robots(e.g.,minimally invasive surgery,targeted delivery,and tissue engineering),highlighting their potentials in revolutionizing biomedical technologies.This review also points out the current challenges and provides insights into future research directions,which we hope can serve as a useful reference for the development of next-generation adaptive miniature robots.展开更多
Two-dimensional （2D） materials with robust ferromagnetism have played a key role in realizing next- generation spin-electronic devices, but many challenges remain, especially the lack of intrinsic ferro- magnetic be...Two-dimensional （2D） materials with robust ferromagnetism have played a key role in realizing next- generation spin-electronic devices, but many challenges remain, especially the lack of intrinsic ferro- magnetic behavior in almost all 2D materials. Here, we highlight ultrathin Mn3O4 nanosheets as a new 2D ferromagnetic material with strong magnetocrystalline anisotropy. Magnetic measurements along the in-plane and out-of-plane directions confirm that the out-of-plane direction is the easy axis. The 2D-confined environment and Rashba-type spin-orbit coupling are thought to be responsible for the magnetocrystaUine anisotropy. The robust ferromagnetism in 2D MnaO4 nanosheets with magne- tocrystalline anisotropy not only paves a new way for realizing the intrinsic ferromagnetic behavior in 2D materials but also provides a novel candidate for building next-generation spin-electronic devices.展开更多
Exploring two-dimensional(2D)magnetic heterostructures is essential for future spintronic and optoelectronic devices.Herein,using first-principle calculations,stable ferromagnetic ordering and colorful electronic prop...Exploring two-dimensional(2D)magnetic heterostructures is essential for future spintronic and optoelectronic devices.Herein,using first-principle calculations,stable ferromagnetic ordering and colorful electronic properties are established by constructing the VS_(2)/C_(3)N van der Waals(vdW)heterostructure.Unlike the semiconductive properties with indirect band gaps in both the VS2 and C3N monolayers,our results indicate that a direct band gap with type-Ⅱband alignment and p-doping characters are realized in the spin-up channel of the VS_(2)/C_(3)N heterostructure,and a typical type-Ⅲband alignment with a broken-gap in the spin-down channel.Furthermore,the band alignments in the two spin channels can be effectively tuned by applying tensile strain.An interchangement between the type-Ⅱand type-Ⅲband alignments occurs in the two spin channels,as the tensile strain increases to 4%.The attractive magnetic properties and the unique band alignments could be useful for prospective applications in the next-generation tunneling devices and spintronic devices.展开更多
The Laves phase alloy Tb-Dy-Fe, commercially known as Terfenol-D, exhibits the giant room-temperature magnetostriction at moderate field strength of a few kOe due to its combination of high magnetostriction and low ma...The Laves phase alloy Tb-Dy-Fe, commercially known as Terfenol-D, exhibits the giant room-temperature magnetostriction at moderate field strength of a few kOe due to its combination of high magnetostriction and low magnetocrystalline anisotropic energy. Thus, this pseudobinary rare earth iron compound has found quite a number of applications such as in magnetomechanical transducers, actuators and adaptive vibration control systems. The simultaneous measurements of magnetostriction and magnetization at various fixed compressive pre-stresses applied in the axial direction for Tb0.3Dy0.7Fe1.95 samples are presented. The results show that the magnetostriction increases with increasing compressive stress until it reaches 1742 ×10^6 under 25 MPa, so does the coercive magnetic field. And the hysteresis loop area for magnetization and magnetostriction also increases with the increment of applied compressive stresses. But the maximum magnetic susceptibility χ（dM/dH） is obtained under zero stress field and the strain derivative dλ/dH increases to the highest amplitude of 0.039×10^-6 A^-1m at a stress level of 5 MPa. In the strain versus magnetization intensity curve, the initial fiat stage mainly consisting of a 180° domain wall motion becomes shorter with increasing stress. It means more initial domains are driven to the transversal direction under the compressive stress before magnetization, which is consistent with the improvement of the magnetostriction.展开更多
The authors discovered in first time that the weight of materials or its gravitational force by earth related to its temperature and its ferromagnetism. An experiment was designed to elevate the temperatures of six di...The authors discovered in first time that the weight of materials or its gravitational force by earth related to its temperature and its ferromagnetism. An experiment was designed to elevate the temperatures of six different materials （Au, Ag, Cu, Fe, Al, Ni） up to 600 ℃and precisely measured their weights. It is found all the materials weigh about 0.33 ‰ - 0. 82 ‰ less. For example the weight of silver sample weighted by a precision electronic scale in a manner of special design decreases about 0.8 ‰, when its temperature is elevated to 600 ℃. Thus different metals＇ gravitational forces or weights are adjusted with temperature variation.展开更多
Two-dimensional （2D） ferromagnetic （FM） materials have great potential for applications in next-generation spin- tronic devices. Since most 2D FM materials come from van der Waals crystals, stabilizing them on a c...Two-dimensional （2D） ferromagnetic （FM） materials have great potential for applications in next-generation spin- tronic devices. Since most 2D FM materials come from van der Waals crystals, stabilizing them on a certain substrate without killing the ferromagnetism is still a challenge. Through systematic first-principles calculations, we proposed a new family of 2D FM materials which combines TaX （X= S, Se or Te） monolayer and A1203（0001） substrate. The TaX monolayers provide magnetic states and the A1203（0001） substrate stabilizes the former. Interestingly, the A1203（0001） substrate leads to a metal-to-insulator transition in the TaX monolayers and induces a band gap up to 303 meV. Our study paves the way to explore promising 2D FM materials for practical applications in spintronics devices.展开更多
Ferromagnetic materials play an important role in memory materials,but conventional control methods are often limited by issues such as high power consumption and volatility.Multiferroic heterostructures provide a pro...Ferromagnetic materials play an important role in memory materials,but conventional control methods are often limited by issues such as high power consumption and volatility.Multiferroic heterostructures provide a promising alternative to achieve low power consumption and nonvolatile electric control of magnetic properties.In this paper,a two-dimensional multiferroic van der Waals heterostructure OsCl_(2)/Sc_(2)CO_(2),which is composed of ferromagnetic monolayer OsCl_(2)and ferroelectric monolayer Sc_(2)CO_(2),is studied by first-principles density functional theory.The results show that by reversing the direction of the electric polarization of Sc_(2)CO_(2),OsCl_(2)can be transformed from a semiconductor to a half-metal,demonstrating a nonvolatile electrical manipulation of the heterostructure through ferroelectric polarization.The underlying physical mechanism is explained by band alignments and charge density differences.Furthermore,based on the heterostructure,we construct a multiferroic tunnel junction with a tunnel electroresistance ratio of 3.38×10^(14)%and a tunnel magnetoresistance ratio of 5.04×10^(6)%,allowing control of conduction states via instantaneous electric or magnetic fields.The findings provide a feasible strategy for designing advanced nanodevices based on the giant tunnel electroresistance and tunnel magnetoresistance effects.展开更多
Crystalline Co nanocomposites in the rutile TiO2 were synthesized by 180 keV Co ion beam implantation at temperature of 623 K with the fluence of 4×10^16 cm^-2. The structural and magnetic properties of samples w...Crystalline Co nanocomposites in the rutile TiO2 were synthesized by 180 keV Co ion beam implantation at temperature of 623 K with the fluence of 4×10^16 cm^-2. The structural and magnetic properties of samples with different thermal treatment were characterized by synchrotron radiation X-ray diffraction （SR-XRD）, high resolution transmission electron mi- croscopy （HRTEM）, Rutherford backscattering/channeling and the superconducting quantum interference device magnetometer. The SR-XRD results reveal the formation of hcp and fce phases of Co clusters, and the SR-XRD and HRTEM show that Co nanocrystals （NCs） have been formed in TiO2 after ion implantation. With increasing of annealing temperature, the transition of hcp to fcc Co is observed, and the Co NCs sizes were increased with increasing post-annealing temperature. At annealing temperature 1073 K, the lattice damaged is significantly removed compared with the virgin sample. The Co NCs forming inside TiO2 are the major contribution of the measured ferromagnetism.展开更多
Static tensile test and tensile-tensile fatigue test of medium carbon steel sheet specimens with surface crack precut were performed on MTS810 hydraulic testing machine to clear the meaning of the point of Hp(y) value...Static tensile test and tensile-tensile fatigue test of medium carbon steel sheet specimens with surface crack precut were performed on MTS810 hydraulic testing machine to clear the meaning of the point of Hp(y) value zero. Magnetic memory signals were measured during the test process. The results show that only one point of Hp(y) zero value exists in all measured magnetic signal curves during the loading process, which should be a sign of intersection of positive-negative magnetic poles after magnetic ordered state appears and does not indicate the position of surface crack precut. The analysis shows that the surface crack precut can not interrupt the magnetic ordered state occurred during the test completely, hence its Hp(y) value is not zero. However, the crack extending to a penetrated defect at the instant of specimen′s fracture leads to the discontinuance of magnetic ordered state.展开更多
By combining the advantages of effcient damping and high mechanical properties,Ni-Mn-Ga particle composites have a very good prospect for applications in damping structure design.In this paper,a ferromagnetic shape me...By combining the advantages of effcient damping and high mechanical properties,Ni-Mn-Ga particle composites have a very good prospect for applications in damping structure design.In this paper,a ferromagnetic shape memory alloy Ni-Mn-Ga composite is prepared.Ni-Mn-Ga particle/bisphenol-A epoxy composite cantilever beam vibration tests under a magnetic feld and without the magnetic feld are conducted to analyze the structural damping ratios n.Meanwhile,the damping characteristics of the Ni-Mn-Ga composite are studied through the axial loading-unloading method and the acoustic emission signals method.The damping coeffcient of the composite for different Ni-Mn-Ga volume fractions is obtained.The interface properties of the composite are discussed by micro examination and axial loading.The relationships between the damping of the composite and that of the component materials are discussed.The specifc damping capacity（SDC）and acoustic emission counts diagram of different specimens with different Ni-Mn-Ga volume fractions are analyzed.展开更多
High-quality Fe-doped TiO_(2) films are epitaxially grown on MgF_(2) substrates by pulsed laser deposition.The x-ray diffraction and Raman spectra prove that they are of pure rutile phase.High-resolution transmission ...High-quality Fe-doped TiO_(2) films are epitaxially grown on MgF_(2) substrates by pulsed laser deposition.The x-ray diffraction and Raman spectra prove that they are of pure rutile phase.High-resolution transmission electron microscopy(TEM)further demonstrates that the epitaxial relationship between rutile-phased TiO_(2) and MgF_(2) substrates is 110 TiO_(2)||110 MgF_(2).The room temperature ferromagnetism is detected by alternative gradient magnetometer.By increasing the ambient oxygen pressure,magnetization shows that it decreases monotonically while absorption edge shows a red shift.The transport property measurement demonstrates a strong correlation between magnetization and carrier concentration.The influence of ambient oxygen pressure on magnetization can be well explained by a modified bound magnetization polarization model.展开更多
The electromagnetic properties of Ba2Co1.8Cu0.2Fe12O22 （Co2Y） and Ba3Co2Fe23.4Zn0.6O41 （Co2Z） were studied by measuring microwave scattering parameters.In the transmission spectra of Ba2Co1.8Cu0.2Fe12O22,a forbidd...The electromagnetic properties of Ba2Co1.8Cu0.2Fe12O22 （Co2Y） and Ba3Co2Fe23.4Zn0.6O41 （Co2Z） were studied by measuring microwave scattering parameters.In the transmission spectra of Ba2Co1.8Cu0.2Fe12O22,a forbidden band emerges due to ferromagnetic resonance,and the permeability will turn to negative in the vicinity of the ferromagnetic resonance frequency.In the complex permittivity spectra of Ba3Co2Fe23.4Zn0.6O41,the negative permittivity can be obtained due to dielectric resonance.Therefore,Co2Y and Co2Z can be used to construct left-handed materials possessing negative permeability and negative permittivity simultaneously.展开更多
Two-dimensional(2D)transition metal oxyhalides and nitrogen-halides(T_(M)BXs,where T_(M)=transition metal,B=O-group and N-group elements,X=halogen)have emerged as promising candidates for exploring multiferroic orders...Two-dimensional(2D)transition metal oxyhalides and nitrogen-halides(T_(M)BXs,where T_(M)=transition metal,B=O-group and N-group elements,X=halogen)have emerged as promising candidates for exploring multiferroic orders and spintronic applications.In this study,we conduct a systematic firstprinciples high-throughput screening combined with machine learning to identify novel 2D ferromagnetic and multiferroic materials within T_(M)BX family.From a comprehensive dataset comprising 672 T_(M)BX monolayers,we identify 78 ferromagnetic systems,of which 38 exhibit high Curie temperatures(TC≥200 K),significantly expanding the known library of 2D magnetic materials.A machine learningmodel is developed to elucidate the key factors governing ferromagnetism,revealing that the second-nearest neighbor exchange interaction(J_(2))plays a dominant role in determining TC.Furthermore,we discovered seven ferromagnetic-ferroelectric multiferroic systems,revealing unique polarization switching pathways.Notably,spin transport simulations using the nonequilibriumGreen’s function formalism demonstrate exceptional spin filtering capabilities(~100%)and giant biasdependent tunneling magnetoresistance(>10^(5)%).These findings deepen the fundamental understanding of 2D multiferroics and establish a desired platformfor future experimental exploration and the development of next-generation spintronic devices.展开更多
文摘Based on the proper assumptions and approximations, the coupling mechanism of the electromagnetic acoustic transducer (EMAT) for ultrasonic generation within ferromagnetic material was studied by analyzing the eddy current distribution, Lorentz force, magnetostriction force and magnetization force. Some useful numerical calculations are presented to explain the EMAT behavior with general geometric arrangements. It is indicated that for the ferromagnetic material the magnetostriction effect dominates the EMAT phenomenon for ultrasonic wave generation in low magnetic field intensity, while the material does not reach its magnetizing saturation. But, with the increase of the bias magnetic field and saturation, the magnetostrictive terms will make no contributions to the ultrasonic generation and the Lorentz force becomes the only exciting mechanism. It is important to determine both the Lorentz and magnetostriction forces and select the appropriate working manner for achieving an optimized design.
基金supported by National Natural Science Foundation of China (No. 50507016)the Program for New Century Excellent Talents in Universities of China (NCET-07-0671)
文摘FLUENT and ANSYS codes are used to solve the magnethydrodynamics （MHD） equations and electromagnetic field equations, respectively. An interface code is developed to implement the bi-direction transfer of calculation data between FLUENT and ANSYS. Then a 2-D MHD arc model is built up with the consideration of the nonlinear ferromagnetic material. The arc shape, gas flow velocity and magnetic field distribution are presented at a current of 200 A. The influence of the number of splitter plates on arc motion is also analyzed.
基金Supported by National Key Research and Development Program of China(Grant No.2018YFC0809003)National Natural Science Foundation of China(Grant No.51577139)Innovative Talents Program of Far East NDT New Technology&Application Forum
文摘Magnetic Barkhausen Noise(MBN) method is known as an effective nondestructive evaluation(NDE) method for evaluation of residual stress in ferromagnetic materials. Some studies on the feasibility of the MBN method for NDE of residual strains were also conducted and found applicable. However, these studies are mainly focused on the state of residual strains which were introduced through a one-cycle-loading process. In practice, however, structures may suffer from an unpredictable and complicated loading history, i.e., the final state of plastic strain may be induced by several times of large loads. Whether the loading history has influences on MBN signals or not is of great importance for the practical application of the MBN method. In this paper, several ferromagnetic specimens with the same final state of residual strain but of different loading history were fabricated and inspected by using a MBN testing system. The experimental results reveal that the loading history has a significant influence on the detected MBN signals especially for a residual strain in range less than 1%, which doubts the feasibility to apply the MBN method simply in the practical environment. In addition, micro-observations on the magnetic domain structures of the plastic damaged specimens were also carried out to clarify the influence mechanism of loading history on the MBN signals.
基金supported by the National Natural Science Foundation of China under Grant No.11802145Jiangsu Provincial Natural Science Foundation of China under Grant No.BK20191450.
文摘The transient response in a bi-material cylinder of soft ferromagnetic material under magnetic shock is investigated in this study.The analytical solutions for displacement and stress have been derived using the finite Hankel transform and the Laplace transform.The numerical examples show that the displacement and stress fields respond dynamically in the bi-material cylinder under magnetic shock.The derived displacement at the center and radial stress on the surface of the cylinder satisfy the boundary conditions,showing the correctness of calculation.The displacement and stress waves propagate from the surface to the center of the cylinder when the magnetic field is loaded.The stress fields increase from the center to the surface of the cylinder and are much larger than the quasi-static state since the waves reflect,collide and concentrate in the body of the cylinder.The method of this paper can be used in the design of soft ferromagnetic structures.
文摘Magnetic Barkhausen Noise (MBN) is a phenomenon of electromagnetic energy emission due to the movement of magnetic domain walls inside ferromagnetic materials when they are locally magnetized by an alternating magnetic field. According to Faraday’s law of electromagnetic induction, the noise can be received by the coil attached to the surface of the material being magnetized and the noise carries the message of the characteristics of the material such as stresses, hardness, phase content, etc. Based on the characteristic of the noise, research about the relationship between the welding stresses in the welding assembly and the noise, the fatigue damage of the plate structure and the noise, and the influence of heat treatment and the variation of phase content to the noise are carried out in this paper.
文摘This paper focuses on mathematical models describing the mechanical behavior of ferromagnetic materials under magnetization. Through combination of the electromagnetic field theory with the theory of elastic mechanics, several nonlinear systems of fourth order partial differential equations were deduced. By making further assumption, the first-order approximation of the above equations was established, of which the solutions are good enough for engineering application.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 50772120 and 60977004)Funds of the Chinese Academy of Sciences for Key Topics in Innovation Engineering (Grant No. KJCXZYW.NANO.06)+1 种基金Shanghai Rising StarTracking Program (Grant No. 10QH1402700)UNAM-DGAPA Mexico IN120406-3
文摘We present a detailed theoretical analysis on the possibilities and conditions for negative permeability and negative refraction occuring in the magnetic materials with both pronounced magnetic and dielectric responses to electromagnetic waves. The results indicate that the permeability is always positive for 5 = （2q ＋0.5）π （5 is the initial phase difference of magnetic components hx and hy of incident electromagnetic wave, q is integer）, which means that it is difficult to realize negative refraction. However, for 5 = 2qπ, 5 = （2q ＋ 1）π, or 5 = （2q - 0.5）π, the negative permeability occurs at some range of free procession frequency, which means that the refraction can become negative under certain conditions. Further analysis reveals that for general positive permittivity there are various opportunities for realizing the negative refraction provided that some requirements are met. One concludes also that the refractive index for δ = 2qπ case is similar to 5 = （2q ＋ 1）π The only difference between two cases of δ = 2qπ and 5 = （2q ＋ 1）π is that the x-direction for δ = 2qπ corresponds to the y-direction for 5 = （2q ＋ 1）π and the y-direction for 5 = 2qπ corresponds to the x-direction for δ = （2q ＋ 1）π. The results are valuable for designing and analysing the complex negative refraction of magnetic materials.
基金the National Key R&D Program of China(No.2023YFE0208700)National Natural Sci-ence Foundation of China(No.92163109 and 52072095)+7 种基金Shenzhen Science and Technology Program(No.RCJC20231211090000001,GXWD20231129101105001)the National Natural Science Foundation of China(No.52205590)the Natural Science Foundation of Jiangsu Province(No.BK20220834)the Start-up Research Fund of Southeast University(No.RF1028623098)the State Key Laboratory of Robotics and Systems(HIT)(No.SKLRS-2024-KF-11)National Natural Science Foundation of China(No.52202348)Guangdong Basic and Applied Basic Research Foundation(No.2023A1515011491)Shenzhen Science and Technology Program(Nos.GXWD20220818224716001,KJZD20231023100302006).
文摘Due to the small size,active mobility,and intrinsic softness,miniature soft robots hold promising po-tentials in reaching the deep region inside living bodies otherwise inaccessible with compelling agility,adaptability and safety.Various materials and actuation strategies have been developed for creating soft robots,among which,ferromagnetic soft materials that self-actuate in response to external magnetic fields have attracted worldwide attention due to their remote controllability and excellent compatibil-ity with biological tissues.This review presents comprehensive and systematic research advancements in the design,fabrication,and applications of ferromagnetic soft materials for miniature robots,providing in-sights into their potential use in biomedical fields and beyond.The programming strategies of ferromag-netic soft materials are summarized and classified,including mold-assisted programming,3D printing-assisted programming,microassembly-assisted programming,and magnetization reprogramming.Each approach possesses unique advantages in manipulating the magnetic responsiveness of ferromagnetic soft materials to achieve outstanding actuation and deformation performances.We then discuss the biomedi-cal applications of ferromagnetic soft material-based soft robots(e.g.,minimally invasive surgery,targeted delivery,and tissue engineering),highlighting their potentials in revolutionizing biomedical technologies.This review also points out the current challenges and provides insights into future research directions,which we hope can serve as a useful reference for the development of next-generation adaptive miniature robots.
基金This work was financially supported by the National Basic Research Program of China （Grant No. 2015CB932302）, the Youth Innovation Promotion Association CAS, the National Natural Science Foundation of China （Grant Nos. 21501164, U1632154, and J1030412）, National Young Top- Notch Talent Support Program, the Chinese Academy of Sciences （Grant No. XDB01020300）, the Fok Ying-Tong Education Foundation, China （Grant No. 141042）, the Anhui Provincial Natural Science Foundation （Grant No. 1608085QA08）, and tile Fundamental Research Funds for the Central Universities （Grant Nos. WK2060190027, WK2310000055, and WK2340000065）. We would like to thank the staff at beamlines BL14W1 （Shanghai Synchrotron Radiation Facility） for providing beam time and for their helpful discussions.
文摘Two-dimensional （2D） materials with robust ferromagnetism have played a key role in realizing next- generation spin-electronic devices, but many challenges remain, especially the lack of intrinsic ferro- magnetic behavior in almost all 2D materials. Here, we highlight ultrathin Mn3O4 nanosheets as a new 2D ferromagnetic material with strong magnetocrystalline anisotropy. Magnetic measurements along the in-plane and out-of-plane directions confirm that the out-of-plane direction is the easy axis. The 2D-confined environment and Rashba-type spin-orbit coupling are thought to be responsible for the magnetocrystaUine anisotropy. The robust ferromagnetism in 2D MnaO4 nanosheets with magne- tocrystalline anisotropy not only paves a new way for realizing the intrinsic ferromagnetic behavior in 2D materials but also provides a novel candidate for building next-generation spin-electronic devices.
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFA0207500)Natural Science Foundation of Henan Province,China(Grant No.202300410507)Key Research&Development and Promotion Projects in Henan Province,China(Grant No.212102210134).
文摘Exploring two-dimensional(2D)magnetic heterostructures is essential for future spintronic and optoelectronic devices.Herein,using first-principle calculations,stable ferromagnetic ordering and colorful electronic properties are established by constructing the VS_(2)/C_(3)N van der Waals(vdW)heterostructure.Unlike the semiconductive properties with indirect band gaps in both the VS2 and C3N monolayers,our results indicate that a direct band gap with type-Ⅱband alignment and p-doping characters are realized in the spin-up channel of the VS_(2)/C_(3)N heterostructure,and a typical type-Ⅲband alignment with a broken-gap in the spin-down channel.Furthermore,the band alignments in the two spin channels can be effectively tuned by applying tensile strain.An interchangement between the type-Ⅱand type-Ⅲband alignments occurs in the two spin channels,as the tensile strain increases to 4%.The attractive magnetic properties and the unique band alignments could be useful for prospective applications in the next-generation tunneling devices and spintronic devices.
基金the National Natural Science Foundation of China(Nos.10572069 and 10121202).
文摘The Laves phase alloy Tb-Dy-Fe, commercially known as Terfenol-D, exhibits the giant room-temperature magnetostriction at moderate field strength of a few kOe due to its combination of high magnetostriction and low magnetocrystalline anisotropic energy. Thus, this pseudobinary rare earth iron compound has found quite a number of applications such as in magnetomechanical transducers, actuators and adaptive vibration control systems. The simultaneous measurements of magnetostriction and magnetization at various fixed compressive pre-stresses applied in the axial direction for Tb0.3Dy0.7Fe1.95 samples are presented. The results show that the magnetostriction increases with increasing compressive stress until it reaches 1742 ×10^6 under 25 MPa, so does the coercive magnetic field. And the hysteresis loop area for magnetization and magnetostriction also increases with the increment of applied compressive stresses. But the maximum magnetic susceptibility χ（dM/dH） is obtained under zero stress field and the strain derivative dλ/dH increases to the highest amplitude of 0.039×10^-6 A^-1m at a stress level of 5 MPa. In the strain versus magnetization intensity curve, the initial fiat stage mainly consisting of a 180° domain wall motion becomes shorter with increasing stress. It means more initial domains are driven to the transversal direction under the compressive stress before magnetization, which is consistent with the improvement of the magnetostriction.
文摘The authors discovered in first time that the weight of materials or its gravitational force by earth related to its temperature and its ferromagnetism. An experiment was designed to elevate the temperatures of six different materials （Au, Ag, Cu, Fe, Al, Ni） up to 600 ℃and precisely measured their weights. It is found all the materials weigh about 0.33 ‰ - 0. 82 ‰ less. For example the weight of silver sample weighted by a precision electronic scale in a manner of special design decreases about 0.8 ‰, when its temperature is elevated to 600 ℃. Thus different metals＇ gravitational forces or weights are adjusted with temperature variation.
基金Project supported by the National Natural Science Foundation of China(Grant No.11574223)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20150303)the Jiangsu Specially-Appointed Professor Program of Jiangsu Province,China
文摘Two-dimensional （2D） ferromagnetic （FM） materials have great potential for applications in next-generation spin- tronic devices. Since most 2D FM materials come from van der Waals crystals, stabilizing them on a certain substrate without killing the ferromagnetism is still a challenge. Through systematic first-principles calculations, we proposed a new family of 2D FM materials which combines TaX （X= S, Se or Te） monolayer and A1203（0001） substrate. The TaX monolayers provide magnetic states and the A1203（0001） substrate stabilizes the former. Interestingly, the A1203（0001） substrate leads to a metal-to-insulator transition in the TaX monolayers and induces a band gap up to 303 meV. Our study paves the way to explore promising 2D FM materials for practical applications in spintronics devices.
基金supported by the National Natural Science Foundation of China(Grant Nos.12074213,11574108,and 12104253)the National Key R&D Program of China(Grant No.2022YFA1403103)+2 种基金the Major Basic Program of the Natural Science Foundation of Shandong Province(Grant No.ZR2021ZD01)the Natural Science Foundation of Shandong Provincial(Grant No.ZR2023MA082)the Project of Introduction and Cultivation for Young Innovative Talents in Colleges and Universities of Shandong Province。
文摘Ferromagnetic materials play an important role in memory materials,but conventional control methods are often limited by issues such as high power consumption and volatility.Multiferroic heterostructures provide a promising alternative to achieve low power consumption and nonvolatile electric control of magnetic properties.In this paper,a two-dimensional multiferroic van der Waals heterostructure OsCl_(2)/Sc_(2)CO_(2),which is composed of ferromagnetic monolayer OsCl_(2)and ferroelectric monolayer Sc_(2)CO_(2),is studied by first-principles density functional theory.The results show that by reversing the direction of the electric polarization of Sc_(2)CO_(2),OsCl_(2)can be transformed from a semiconductor to a half-metal,demonstrating a nonvolatile electrical manipulation of the heterostructure through ferroelectric polarization.The underlying physical mechanism is explained by band alignments and charge density differences.Furthermore,based on the heterostructure,we construct a multiferroic tunnel junction with a tunnel electroresistance ratio of 3.38×10^(14)%and a tunnel magnetoresistance ratio of 5.04×10^(6)%,allowing control of conduction states via instantaneous electric or magnetic fields.The findings provide a feasible strategy for designing advanced nanodevices based on the giant tunnel electroresistance and tunnel magnetoresistance effects.
基金The work was supported by the National Natural Science Foundation of China （No.10875004 and No.11005005）, and National Basic Research Program of China （No.2010CB832904）, the 2011 Self-Raised Funds Project of HeBei Science and Technology Bureau （No.11316736）, and the 2011 Key Project of the Langfang Teachers College （No.LSZZ201101）.
文摘Crystalline Co nanocomposites in the rutile TiO2 were synthesized by 180 keV Co ion beam implantation at temperature of 623 K with the fluence of 4×10^16 cm^-2. The structural and magnetic properties of samples with different thermal treatment were characterized by synchrotron radiation X-ray diffraction （SR-XRD）, high resolution transmission electron mi- croscopy （HRTEM）, Rutherford backscattering/channeling and the superconducting quantum interference device magnetometer. The SR-XRD results reveal the formation of hcp and fce phases of Co clusters, and the SR-XRD and HRTEM show that Co nanocrystals （NCs） have been formed in TiO2 after ion implantation. With increasing of annealing temperature, the transition of hcp to fcc Co is observed, and the Co NCs sizes were increased with increasing post-annealing temperature. At annealing temperature 1073 K, the lattice damaged is significantly removed compared with the virgin sample. The Co NCs forming inside TiO2 are the major contribution of the measured ferromagnetism.
基金This work was financially supported by the National Natural Science Foundation of China (No.50235030, 50505052).
文摘Static tensile test and tensile-tensile fatigue test of medium carbon steel sheet specimens with surface crack precut were performed on MTS810 hydraulic testing machine to clear the meaning of the point of Hp(y) value zero. Magnetic memory signals were measured during the test process. The results show that only one point of Hp(y) zero value exists in all measured magnetic signal curves during the loading process, which should be a sign of intersection of positive-negative magnetic poles after magnetic ordered state appears and does not indicate the position of surface crack precut. The analysis shows that the surface crack precut can not interrupt the magnetic ordered state occurred during the test completely, hence its Hp(y) value is not zero. However, the crack extending to a penetrated defect at the instant of specimen′s fracture leads to the discontinuance of magnetic ordered state.
基金supported by the National Natural Science Foundation of China (No:10972021)
文摘By combining the advantages of effcient damping and high mechanical properties,Ni-Mn-Ga particle composites have a very good prospect for applications in damping structure design.In this paper,a ferromagnetic shape memory alloy Ni-Mn-Ga composite is prepared.Ni-Mn-Ga particle/bisphenol-A epoxy composite cantilever beam vibration tests under a magnetic feld and without the magnetic feld are conducted to analyze the structural damping ratios n.Meanwhile,the damping characteristics of the Ni-Mn-Ga composite are studied through the axial loading-unloading method and the acoustic emission signals method.The damping coeffcient of the composite for different Ni-Mn-Ga volume fractions is obtained.The interface properties of the composite are discussed by micro examination and axial loading.The relationships between the damping of the composite and that of the component materials are discussed.The specifc damping capacity（SDC）and acoustic emission counts diagram of different specimens with different Ni-Mn-Ga volume fractions are analyzed.
基金Project supported by the National Natural Science Foundation of China(Grant No.11504192)the Natural Science Foundation of Shandong Province,China(Grant Nos.ZR201910230017 and BSB2014010).
文摘High-quality Fe-doped TiO_(2) films are epitaxially grown on MgF_(2) substrates by pulsed laser deposition.The x-ray diffraction and Raman spectra prove that they are of pure rutile phase.High-resolution transmission electron microscopy(TEM)further demonstrates that the epitaxial relationship between rutile-phased TiO_(2) and MgF_(2) substrates is 110 TiO_(2)||110 MgF_(2).The room temperature ferromagnetism is detected by alternative gradient magnetometer.By increasing the ambient oxygen pressure,magnetization shows that it decreases monotonically while absorption edge shows a red shift.The transport property measurement demonstrates a strong correlation between magnetization and carrier concentration.The influence of ambient oxygen pressure on magnetization can be well explained by a modified bound magnetization polarization model.
基金supported by the National Natural Science Foundation of China (No.50702005)the Basic and Frontier Research Programs of Henan Province,China (No.092300410242)the Natural Science Foundation of the Education Department of Henan Province,China (No.2010A430012)
文摘The electromagnetic properties of Ba2Co1.8Cu0.2Fe12O22 （Co2Y） and Ba3Co2Fe23.4Zn0.6O41 （Co2Z） were studied by measuring microwave scattering parameters.In the transmission spectra of Ba2Co1.8Cu0.2Fe12O22,a forbidden band emerges due to ferromagnetic resonance,and the permeability will turn to negative in the vicinity of the ferromagnetic resonance frequency.In the complex permittivity spectra of Ba3Co2Fe23.4Zn0.6O41,the negative permittivity can be obtained due to dielectric resonance.Therefore,Co2Y and Co2Z can be used to construct left-handed materials possessing negative permeability and negative permittivity simultaneously.
基金supported by the National Science Foundation of China (Grant No. 12347115)China Postdoctoral Science Foundation (No. 2024M760690)+2 种基金Hangzhou Science and Technology Bureau of Zhejiang Province (No. TD2020002)Work at HDU was supported by Zhejiang Provincial Natural Science Foundation (QN25A040026)the Foundation of Hangzhou Dianzi University (KYS075624288). We gratefully acknowledge HZWTECH for providing computational facilities. S. Xu thanks Taozhen Fu (from HZWTECH) for help and discussions on this study.
文摘Two-dimensional(2D)transition metal oxyhalides and nitrogen-halides(T_(M)BXs,where T_(M)=transition metal,B=O-group and N-group elements,X=halogen)have emerged as promising candidates for exploring multiferroic orders and spintronic applications.In this study,we conduct a systematic firstprinciples high-throughput screening combined with machine learning to identify novel 2D ferromagnetic and multiferroic materials within T_(M)BX family.From a comprehensive dataset comprising 672 T_(M)BX monolayers,we identify 78 ferromagnetic systems,of which 38 exhibit high Curie temperatures(TC≥200 K),significantly expanding the known library of 2D magnetic materials.A machine learningmodel is developed to elucidate the key factors governing ferromagnetism,revealing that the second-nearest neighbor exchange interaction(J_(2))plays a dominant role in determining TC.Furthermore,we discovered seven ferromagnetic-ferroelectric multiferroic systems,revealing unique polarization switching pathways.Notably,spin transport simulations using the nonequilibriumGreen’s function formalism demonstrate exceptional spin filtering capabilities(~100%)and giant biasdependent tunneling magnetoresistance(>10^(5)%).These findings deepen the fundamental understanding of 2D multiferroics and establish a desired platformfor future experimental exploration and the development of next-generation spintronic devices.
