Due to the widespread use of the Internet,customer information is vulnerable to computer systems attack,which brings urgent need for the intrusion detection technology.Recently,network intrusion detection has been one...Due to the widespread use of the Internet,customer information is vulnerable to computer systems attack,which brings urgent need for the intrusion detection technology.Recently,network intrusion detection has been one of the most important technologies in network security detection.The accuracy of network intrusion detection has reached higher accuracy so far.However,these methods have very low efficiency in network intrusion detection,even the most popular SOM neural network method.In this paper,an efficient and fast network intrusion detection method was proposed.Firstly,the fundamental of the two different methods are introduced respectively.Then,the selforganizing feature map neural network based on K-means clustering(KSOM)algorithms was presented to improve the efficiency of network intrusion detection.Finally,the NSLKDD is used as network intrusion data set to demonstrate that the KSOM method can significantly reduce the number of clustering iteration than SOM method without substantially affecting the clustering results and the accuracy is much higher than Kmeans method.The Experimental results show that our method can relatively improve the accuracy of network intrusion and significantly reduce the number of clustering iteration.展开更多
With the rapid development of digital and intelligent information systems, display of radar situation interface has become an important challenge in the field of human-computer interaction. We propose a method for the...With the rapid development of digital and intelligent information systems, display of radar situation interface has become an important challenge in the field of human-computer interaction. We propose a method for the optimization of radar situation interface from error-cognition through the mapping of information characteristics. A mapping method of matrix description is adopted to analyze the association properties between error-cognition sets and design information sets. Based on the mapping relationship between the domain of error-cognition and the domain of design information, a cross-correlational analysis is carried out between error-cognition and design information.We obtain the relationship matrix between the error-cognition of correlation between design information and the degree of importance among design information. Taking the task interface of a warfare navigation display as an example, error factors and the features of design information are extracted. Based on the results, we also propose an optimization design scheme for the radar situation interface.展开更多
Clustering analysis is one of the main concerns in data mining.A common approach to the clustering process is to bring together points that are close to each other and separate points that are away from each other.The...Clustering analysis is one of the main concerns in data mining.A common approach to the clustering process is to bring together points that are close to each other and separate points that are away from each other.Therefore,measuring the distance between sample points is crucial to the effectiveness of clustering.Filtering features by label information and mea-suring the distance between samples by these features is a common supervised learning method to reconstruct distance metric.However,in many application scenarios,it is very expensive to obtain a large number of labeled samples.In this paper,to solve the clustering problem in the few supervised sample and high data dimensionality scenarios,a novel semi-supervised clustering algorithm is proposed by designing an improved prototype network that attempts to reconstruct the distance metric in the sample space with a small amount of pairwise supervised information,such as Must-Link and Cannot-Link,and then cluster the data in the new metric space.The core idea is to make the similar ones closer and the dissimilar ones further away through embedding mapping.Extensive experiments on both real-world and synthetic datasets show the effectiveness of this algorithm.Average clustering metrics on various datasets improved by 8%compared to the comparison algorithm.展开更多
The performance of speaker verification systems is often compromised under real world environments. For example, variations in handset characteristics could cause severe performance degradation. This paper presents a...The performance of speaker verification systems is often compromised under real world environments. For example, variations in handset characteristics could cause severe performance degradation. This paper presents a novel method to overcome this problem by using a non linear handset mapper. Under this method, a mapper is constructed by training an elliptical basis function network using distorted speech features as inputs and the corresponding clean features as the desired outputs. During feature recuperation, clean features are recovered by feeding the distorted features to the feature mapper. The recovered features are then presented to a speaker model as if they were derived from clean speech. Experimental evaluations based on 258 speakers of the TIMIT and NTIMIT corpuses suggest that the feature mappers improve the verification performance remarkably.展开更多
Presented is a new testing system based on using the factor models and self-organizing feature maps as well as the method of filtering undesirable environment influence. Testing process is described by the factor mode...Presented is a new testing system based on using the factor models and self-organizing feature maps as well as the method of filtering undesirable environment influence. Testing process is described by the factor model with simplex structure, which represents the influences of genetics and environmental factors on the observed parameters - the answers to the questions of the test subjects in one case and for the time, which is spent on responding to each test question to another. The Monte Carlo method is applied to get sufficient samples for training self-organizing feature maps, which are used to estimate model goodness-of-fit measures and, consequently, ability level. A prototype of the system is implemented using the Raven＇s Progressive Matrices （Advanced Progressive Matrices） - an intelligence test of abstract reasoning. Elimination of environment influence results is performed by comparing the observed and predicted answers to the test tasks using the Kalman filter, which is adapted to solve the problem. The testing procedure is optimized by reducing the number of tasks using the distribution of measures to belong to different ability levels after performing each test task provided the required level of conclusion reliability is obtained.展开更多
Inverse lithography technology(ILT)is intended to achieve optimal mask design to print a lithography target for a given lithography process.Full chip implementation of rigorous inverse lithography remains a challengin...Inverse lithography technology(ILT)is intended to achieve optimal mask design to print a lithography target for a given lithography process.Full chip implementation of rigorous inverse lithography remains a challenging task because of enormous computational resource requirements and long computational time.To achieve full chip ILT solution,attempts have been made by using machine learning techniques based on deep convolution neural network(DCNN).The reported input for such DCNN is the rasterized images of the lithography target;such pure geometrical input requires DCNN to possess considerable number of layers to learn the optical properties of the mask,the nonlinear imaging process,and the rigorous ILT algorithm as well.To alleviate the difficulties,we have proposed the physics based optimal feature vector design for machine learning ILT in our early report.Although physics based feature vector followed by feedforward neural network can provide the solution to machine learning ILT,the feature vector is long and it can consume considerable amount of memory resource in practical implementation.To improve the resource efficiency,we proposed a hybrid approach in this study by combining first few physics based feature maps with a specially designed DCNN structure to learn the rigorous ILT algorithm.Our results show that this approach can make machine learning ILT easy,fast and more accurate.展开更多
Gully feature mapping is an indispensable prerequisite for the motioning and control of gully erosion which is a widespread natural hazard. The increasing availability of high-resolution Digital Elevation Model(DEM) a...Gully feature mapping is an indispensable prerequisite for the motioning and control of gully erosion which is a widespread natural hazard. The increasing availability of high-resolution Digital Elevation Model(DEM) and remote sensing imagery, combined with developed object-based methods enables automatic gully feature mapping. But still few studies have specifically focused on gully feature mapping on different scales. In this study, an object-based approach to two-level gully feature mapping, including gully-affected areas and bank gullies, was developed and tested on 1-m DEM and Worldview-3 imagery of a catchment in the Chinese Loess Plateau. The methodology includes a sequence of data preparation, image segmentation, metric calculation, and random forest based classification. The results of the two-level mapping were based on a random forest model after investigating the effects of feature selection and class-imbalance problem. Results show that the segmentation strategy adopted in this paper which considers the topographic information and optimal parameter combination can improve the segmentation results. The distribution of the gully-affected area is closely related to topographic information, however, the spectral features are more dominant for bank gully mapping. The highest overall accuracy of the gully-affected area mapping was 93.06% with four topographic features. The highest overall accuracy of bank gully mapping is 78.5% when all features are adopted. The proposed approach is a creditable option for hierarchical mapping of gully feature information, which is suitable for the application in hily Loess Plateau region.展开更多
The feature map is a characteristic of high computational efficiency,but it is seldom used in path planning due to its lack of expression of environmental details.To solve this problem,a global path planning algorithm...The feature map is a characteristic of high computational efficiency,but it is seldom used in path planning due to its lack of expression of environmental details.To solve this problem,a global path planning algorithm based on the feature map is proposed based on the directionality of line segment features.First,the robot searches the path along the direction of the target position but turns to search in the direction parallel to the obstacle,which it approaches until the line between the robot and the target position does not intersect with obstacles.Then it turns to the target position,keep searching the path.Meanwhile,the problems of the direction selection of turning point,corner point and obstacle circumvention in the searching process are analysed and corresponding solutions are put forth.Finally,a path optimisation algorithm with variable parameters is proposed,making the optimised path shorter and smoother.Simulation experiments demonstrate that the proposed algorithm is superior to A*algorithm in terms of computation time and path length,especially of the computation efficiency.展开更多
Feature recognition is a process of extracting machining features which has engineering meaning from solid model, and it is a key technology of CAD/CAPP/CAM integration. This paper presents an effective and efficient ...Feature recognition is a process of extracting machining features which has engineering meaning from solid model, and it is a key technology of CAD/CAPP/CAM integration. This paper presents an effective and efficient methodology of recognizing machining feature. In this approach, features are classified into two categories： pocket feature and predefined feature. Different feature type adopts its special hint and heuristic rule, and is helpful to recognize intersection feature. Feature classification optimizes search algorithm and shortens search scope dramatically. Meanwhile, extension and split algorithm is used to handle intersecting feature. Moreover, feature mapping based on machining knowledge is introduced to support downstream application better. Finally, case studies with complex intersecting features prove that the developed approach has stronger recognizing ability.展开更多
Amino acids are the dominant organic components of processed animal proteins,however there has been limited investigation of differences in their composition between various protein sources.Information on these differ...Amino acids are the dominant organic components of processed animal proteins,however there has been limited investigation of differences in their composition between various protein sources.Information on these differences will not only be helpful for their further utilization but also provide fundamental information for developing species-specific identification methods.In this study,self-organizing feature maps(SOFM) were used to visualize amino acid composition of fish meal,and meat and bone meal(MBM) produced from poultry,ruminants and swine.SOFM display the similarities and differences in amino acid composition between protein sources and effectively improve data transparency.Amino acid composition was shown to be useful for distinguishing fish meal from MBM due to their large concentration differences between glycine,lysine and proline.However,the amino acid composition of the three MBMs was quite similar.The SOFM results were consistent with those obtained by analysis of variance and principal component analysis but more straightforward.SOFM was shown to have a robust sample linkage capacity and to be able to act as a powerful means to link different sample for further data mining.展开更多
An improved model based on you only look once version 8(YOLOv8)is proposed to solve the problem of low detection accuracy due to the diversity of object sizes in optical remote sensing images.Firstly,the feature pyram...An improved model based on you only look once version 8(YOLOv8)is proposed to solve the problem of low detection accuracy due to the diversity of object sizes in optical remote sensing images.Firstly,the feature pyramid network(FPN)structure of the original YOLOv8 mode is replaced by the generalized-FPN(GFPN)structure in GiraffeDet to realize the"cross-layer"and"cross-scale"adaptive feature fusion,to enrich the semantic information and spatial information on the feature map to improve the target detection ability of the model.Secondly,a pyramid-pool module of multi atrous spatial pyramid pooling(MASPP)is designed by using the idea of atrous convolution and feature pyramid structure to extract multi-scale features,so as to improve the processing ability of the model for multi-scale objects.The experimental results show that the detection accuracy of the improved YOLOv8 model on DIOR dataset is 92%and mean average precision(mAP)is 87.9%,respectively 3.5%and 1.7%higher than those of the original model.It is proved the detection and classification ability of the proposed model on multi-dimensional optical remote sensing target has been improved.展开更多
Transportation systems are experiencing a significant transformation due to the integration of advanced technologies, including artificial intelligence and machine learning. In the context of intelligent transportatio...Transportation systems are experiencing a significant transformation due to the integration of advanced technologies, including artificial intelligence and machine learning. In the context of intelligent transportation systems (ITS) and Advanced Driver Assistance Systems (ADAS), the development of efficient and reliable traffic light detection mechanisms is crucial for enhancing road safety and traffic management. This paper presents an optimized convolutional neural network (CNN) framework designed to detect traffic lights in real-time within complex urban environments. Leveraging multi-scale pyramid feature maps, the proposed model addresses key challenges such as the detection of small, occluded, and low-resolution traffic lights amidst complex backgrounds. The integration of dilated convolutions, Region of Interest (ROI) alignment, and Soft Non-Maximum Suppression (Soft-NMS) further improves detection accuracy and reduces false positives. By optimizing computational efficiency and parameter complexity, the framework is designed to operate seamlessly on embedded systems, ensuring robust performance in real-world applications. Extensive experiments using real-world datasets demonstrate that our model significantly outperforms existing methods, providing a scalable solution for ITS and ADAS applications. This research contributes to the advancement of Artificial Intelligence-driven (AI-driven) pattern recognition in transportation systems and offers a mathematical approach to improving efficiency and safety in logistics and transportation networks.展开更多
Recently, image representations derived by convolutional neural networks(CNN) have achieved promising performance for instance retrieval, and they outperformthe traditional hand-crafted image features. However, most o...Recently, image representations derived by convolutional neural networks(CNN) have achieved promising performance for instance retrieval, and they outperformthe traditional hand-crafted image features. However, most of existing CNN-based featuresare proposed to describe the entire images, and thus they are less robust to backgroundclutter. This paper proposes a region of interest (RoI)-based deep convolutionalrepresentation for instance retrieval. It first detects the region of interests (RoIs) from animage, and then extracts a set of RoI-based CNN features from the fully-connected layerof CNN. The proposed RoI-based CNN feature describes the patterns of the detected RoIs,so that the visual matching can be implemented at image region-level to effectively identifytarget objects from cluttered backgrounds. Moreover, we test the performance of theproposed RoI-based CNN feature, when it is extracted from different convolutional layersor fully-connected layers. Also, we compare the performance of RoI-based CNN featurewith those of the state-of-the-art CNN features on two instance retrieval benchmarks.Experimental results show that the proposed RoI-based CNN feature provides superiorperformance than the state-of-the-art CNN features for in-stance retrieval.展开更多
Pattern recognition of seismic and mor- phostructural nodes plays an important role in seismic hazard assessment. This is a known fact in seismology that tectonic nodes are prone areas to large earthquake and have thi...Pattern recognition of seismic and mor- phostructural nodes plays an important role in seismic hazard assessment. This is a known fact in seismology that tectonic nodes are prone areas to large earthquake and have this potential. They are identified by morphostructural analysis. In this study, the Alborz region has considered as studied case and locations of future events are forecast based on Kohonen Self-Organized Neural Network. It has been shown how it can predict the location of earthquake, and identifies seismogenic nodes which are prone to earthquake of M5.5＋ at the West of Alborz in Iran by using International Institute Earthquake Engineering and Seismology earthquake catalogs data. First, the main faults and tectonic lineaments have been identified based on MZ （land zoning method） method. After that, by using pattern recognition, we generalized past recorded events to future in order to show the region of probable future earthquakes. In other word, hazardous nodes have determined among all nodes by new catalog generated Self-organizing feature maps （SOFM）. Our input data are extracted from catalog, consists longitude and latitude of past event between 1980-2015 with magnitude larger or equal to 4.5. It has concluded node D1 is candidate for big earthquakes in comparison with other nodes and other nodes are in lower levels of this potential.展开更多
Dear Editor,This letter focuses on the fact that small objects with few pixels disappear in feature maps with large receptive fields, as the network deepens, in object detection tasks. Therefore, the detection of dens...Dear Editor,This letter focuses on the fact that small objects with few pixels disappear in feature maps with large receptive fields, as the network deepens, in object detection tasks. Therefore, the detection of dense small objects is challenging.展开更多
There is a problem of real-time detection difficulty in road surface damage detection. This paper proposes an improved lightweight model based on you only look once version 5(YOLOv5). Firstly, this paper fully utilize...There is a problem of real-time detection difficulty in road surface damage detection. This paper proposes an improved lightweight model based on you only look once version 5(YOLOv5). Firstly, this paper fully utilized the convolutional neural network(CNN) + ghosting bottleneck(G_bneck) architecture to reduce redundant feature maps. Afterwards, we upgraded the original upsampling algorithm to content-aware reassembly of features(CARAFE) and increased the receptive field. Finally, we replaced the spatial pyramid pooling fast(SPPF) module with the basic receptive field block(Basic RFB) pooling module and added dilated convolution. After comparative experiments, we can see that the number of parameters and model size of the improved algorithm in this paper have been reduced by nearly half compared to the YOLOv5s. The frame rate per second(FPS) has been increased by 3.25 times. The mean average precision(m AP@0.5: 0.95) has increased by 8%—17% compared to other lightweight algorithms.展开更多
Currently,there are many limitations to classify images of small objects.In addition,there are limitations such as error detection due to external factors,and there is also a disadvantage that it is difficult to accur...Currently,there are many limitations to classify images of small objects.In addition,there are limitations such as error detection due to external factors,and there is also a disadvantage that it is difficult to accurately distinguish between various objects.This paper uses a convolutional neural network(CNN)algorithm to recognize and classify object images of very small moths and obtain precise data images.A convolution neural network algorithm is used for image data classification,and the classified image is transformed into image data to learn the topological structure of the image.To improve the accuracy of the image classification and reduce the loss rate,a parameter for finding a fast-optimal point of image classification is set by a convolutional neural network and a pixel image as a preprocessor.As a result of this study,we applied a convolution neural network algorithm to classify the images of very small moths by capturing precise images of the moths.Experimental results showed that the accuracy of classification of very small moths was more than 90%.展开更多
Electrical insulation faults produce partial discharges(PD),which can be analysed to identify specific types of defects.PD clustering is a widely used method to identify PD sources,although its success depends largely...Electrical insulation faults produce partial discharges(PD),which can be analysed to identify specific types of defects.PD clustering is a widely used method to identify PD sources,although its success depends largely on the feature maps used.In this paper,three widely used feature maps,or separation maps,are compared:chromatic,energy wavelet with principal component analysis(EW-PCA),and time-frequency(TF).To compare and evaluate,five scenarios with multi-PD environments with noise were developed.The clustering ability of the maps was evaluated using two performance indicators:intercluster distance and intracluster distance.The results indicate that the EW-PCA map performed the best in all scenarios,correctly identifying the largest number of data points and producing the clearest and most distinct clusters.The TF map created distinct clusters in several scenarios,but not all.The chromatic map created distinct clusters in all scenarios but was not as well defined as the other two separation maps.Given the results,it is important in fieldwork to use a wide range of PD clustering,accompanied by performance metrics that support a less biased decision tailored to the test object.展开更多
As an interdisciplinary comprehensive subject involving multidisciplinary knowledge,emotional analysis has become a hot topic in psychology,health medicine and computer science.It has a high comprehensive and practica...As an interdisciplinary comprehensive subject involving multidisciplinary knowledge,emotional analysis has become a hot topic in psychology,health medicine and computer science.It has a high comprehensive and practical application value.Emotion research based on the social network is a relatively new topic in the field of psychology and medical health research.The text emotion analysis of college students also has an important research significance for the emotional state of students at a certain time or a certain period,so as to understand their normal state,abnormal state and the reason of state change from the information they wrote.In view of the fact that convolutional neural network cannot make full use of the unique emotional information in sentences,and the need to label a large number of highquality training sets for emotional analysis to improve the accuracy of the model,an emotional analysismodel using the emotional dictionary andmultichannel convolutional neural network is proposed in this paper.Firstly,the input matrix of emotion dictionary is constructed according to the emotion information,and the different feature information of sentences is combined to form different network input channels,so that the model can learn the emotion information of input sentences from various feature representations in the training process.Then,the loss function is reconstructed to realize the semi supervised learning of the network.Finally,experiments are carried on COAE 2014 and self-built data sets.The proposed model can not only extract more semantic information in emotional text,but also learn the hidden emotional information in emotional text.The experimental results show that the proposed emotion analysis model can achieve a better classification performance.Compared with the best benchmark model gram-CNN,the F1 value can be increased by 0.026 in the self-built data set,and it can be increased by 0.032 in the COAE 2014 data set.展开更多
In order to diagnose the common faults of railway switch control circuit,a fault diagnosis method based on density-based spatial clustering of applications with noise(DBSCAN)and self-organizing feature map(SOM)is prop...In order to diagnose the common faults of railway switch control circuit,a fault diagnosis method based on density-based spatial clustering of applications with noise(DBSCAN)and self-organizing feature map(SOM)is proposed.Firstly,the three-phase current curve of the switch machine recorded by the micro-computer monitoring system is dealt with segmentally and then the feature parameters of the three-phase current are calculated according to the action principle of the switch machine.Due to the high dimension of initial features,the DBSCAN algorithm is used to separate the sensitive features of fault diagnosis and construct the diagnostic sensitive feature set.Then,the particle swarm optimization(PSO)algorithm is used to adjust the weight of SOM network to modify the rules to avoid“dead neurons”.Finally,the PSO-SOM network fault classifier is designed to complete the classification and diagnosis of the samples to be tested.The experimental results show that this method can judge the fault mode of switch control circuit with less training samples,and the accuracy of fault diagnosis is higher than that of traditional SOM network.展开更多
文摘Due to the widespread use of the Internet,customer information is vulnerable to computer systems attack,which brings urgent need for the intrusion detection technology.Recently,network intrusion detection has been one of the most important technologies in network security detection.The accuracy of network intrusion detection has reached higher accuracy so far.However,these methods have very low efficiency in network intrusion detection,even the most popular SOM neural network method.In this paper,an efficient and fast network intrusion detection method was proposed.Firstly,the fundamental of the two different methods are introduced respectively.Then,the selforganizing feature map neural network based on K-means clustering(KSOM)algorithms was presented to improve the efficiency of network intrusion detection.Finally,the NSLKDD is used as network intrusion data set to demonstrate that the KSOM method can significantly reduce the number of clustering iteration than SOM method without substantially affecting the clustering results and the accuracy is much higher than Kmeans method.The Experimental results show that our method can relatively improve the accuracy of network intrusion and significantly reduce the number of clustering iteration.
基金supported by Jiangsu Province Nature Science Foundation of China (BK20221490)the Key Fundamental Research Funds for the Central Universities (30920041114)+2 种基金the National Natural Science Foundation of China (52175469,71601068)the Key Research and Development (Social Development) Project of Jiangsu Province(BE2019647)Jiangsu Province Social Science Foundation of China (20YSB013)。
文摘With the rapid development of digital and intelligent information systems, display of radar situation interface has become an important challenge in the field of human-computer interaction. We propose a method for the optimization of radar situation interface from error-cognition through the mapping of information characteristics. A mapping method of matrix description is adopted to analyze the association properties between error-cognition sets and design information sets. Based on the mapping relationship between the domain of error-cognition and the domain of design information, a cross-correlational analysis is carried out between error-cognition and design information.We obtain the relationship matrix between the error-cognition of correlation between design information and the degree of importance among design information. Taking the task interface of a warfare navigation display as an example, error factors and the features of design information are extracted. Based on the results, we also propose an optimization design scheme for the radar situation interface.
文摘Clustering analysis is one of the main concerns in data mining.A common approach to the clustering process is to bring together points that are close to each other and separate points that are away from each other.Therefore,measuring the distance between sample points is crucial to the effectiveness of clustering.Filtering features by label information and mea-suring the distance between samples by these features is a common supervised learning method to reconstruct distance metric.However,in many application scenarios,it is very expensive to obtain a large number of labeled samples.In this paper,to solve the clustering problem in the few supervised sample and high data dimensionality scenarios,a novel semi-supervised clustering algorithm is proposed by designing an improved prototype network that attempts to reconstruct the distance metric in the sample space with a small amount of pairwise supervised information,such as Must-Link and Cannot-Link,and then cluster the data in the new metric space.The core idea is to make the similar ones closer and the dissimilar ones further away through embedding mapping.Extensive experiments on both real-world and synthetic datasets show the effectiveness of this algorithm.Average clustering metrics on various datasets improved by 8%compared to the comparison algorithm.
文摘The performance of speaker verification systems is often compromised under real world environments. For example, variations in handset characteristics could cause severe performance degradation. This paper presents a novel method to overcome this problem by using a non linear handset mapper. Under this method, a mapper is constructed by training an elliptical basis function network using distorted speech features as inputs and the corresponding clean features as the desired outputs. During feature recuperation, clean features are recovered by feeding the distorted features to the feature mapper. The recovered features are then presented to a speaker model as if they were derived from clean speech. Experimental evaluations based on 258 speakers of the TIMIT and NTIMIT corpuses suggest that the feature mappers improve the verification performance remarkably.
文摘Presented is a new testing system based on using the factor models and self-organizing feature maps as well as the method of filtering undesirable environment influence. Testing process is described by the factor model with simplex structure, which represents the influences of genetics and environmental factors on the observed parameters - the answers to the questions of the test subjects in one case and for the time, which is spent on responding to each test question to another. The Monte Carlo method is applied to get sufficient samples for training self-organizing feature maps, which are used to estimate model goodness-of-fit measures and, consequently, ability level. A prototype of the system is implemented using the Raven＇s Progressive Matrices （Advanced Progressive Matrices） - an intelligence test of abstract reasoning. Elimination of environment influence results is performed by comparing the observed and predicted answers to the test tasks using the Kalman filter, which is adapted to solve the problem. The testing procedure is optimized by reducing the number of tasks using the distribution of measures to belong to different ability levels after performing each test task provided the required level of conclusion reliability is obtained.
文摘Inverse lithography technology(ILT)is intended to achieve optimal mask design to print a lithography target for a given lithography process.Full chip implementation of rigorous inverse lithography remains a challenging task because of enormous computational resource requirements and long computational time.To achieve full chip ILT solution,attempts have been made by using machine learning techniques based on deep convolution neural network(DCNN).The reported input for such DCNN is the rasterized images of the lithography target;such pure geometrical input requires DCNN to possess considerable number of layers to learn the optical properties of the mask,the nonlinear imaging process,and the rigorous ILT algorithm as well.To alleviate the difficulties,we have proposed the physics based optimal feature vector design for machine learning ILT in our early report.Although physics based feature vector followed by feedforward neural network can provide the solution to machine learning ILT,the feature vector is long and it can consume considerable amount of memory resource in practical implementation.To improve the resource efficiency,we proposed a hybrid approach in this study by combining first few physics based feature maps with a specially designed DCNN structure to learn the rigorous ILT algorithm.Our results show that this approach can make machine learning ILT easy,fast and more accurate.
基金Under the auspices of Priority Academic Program Development of Jiangsu Higher Education Institutions,National Natural Science Foundation of China(No.41271438,41471316,41401440,41671389)
文摘Gully feature mapping is an indispensable prerequisite for the motioning and control of gully erosion which is a widespread natural hazard. The increasing availability of high-resolution Digital Elevation Model(DEM) and remote sensing imagery, combined with developed object-based methods enables automatic gully feature mapping. But still few studies have specifically focused on gully feature mapping on different scales. In this study, an object-based approach to two-level gully feature mapping, including gully-affected areas and bank gullies, was developed and tested on 1-m DEM and Worldview-3 imagery of a catchment in the Chinese Loess Plateau. The methodology includes a sequence of data preparation, image segmentation, metric calculation, and random forest based classification. The results of the two-level mapping were based on a random forest model after investigating the effects of feature selection and class-imbalance problem. Results show that the segmentation strategy adopted in this paper which considers the topographic information and optimal parameter combination can improve the segmentation results. The distribution of the gully-affected area is closely related to topographic information, however, the spectral features are more dominant for bank gully mapping. The highest overall accuracy of the gully-affected area mapping was 93.06% with four topographic features. The highest overall accuracy of bank gully mapping is 78.5% when all features are adopted. The proposed approach is a creditable option for hierarchical mapping of gully feature information, which is suitable for the application in hily Loess Plateau region.
基金National Natural Science Foundation of China,Grant/Award Number:61803246。
文摘The feature map is a characteristic of high computational efficiency,but it is seldom used in path planning due to its lack of expression of environmental details.To solve this problem,a global path planning algorithm based on the feature map is proposed based on the directionality of line segment features.First,the robot searches the path along the direction of the target position but turns to search in the direction parallel to the obstacle,which it approaches until the line between the robot and the target position does not intersect with obstacles.Then it turns to the target position,keep searching the path.Meanwhile,the problems of the direction selection of turning point,corner point and obstacle circumvention in the searching process are analysed and corresponding solutions are put forth.Finally,a path optimisation algorithm with variable parameters is proposed,making the optimised path shorter and smoother.Simulation experiments demonstrate that the proposed algorithm is superior to A*algorithm in terms of computation time and path length,especially of the computation efficiency.
文摘Feature recognition is a process of extracting machining features which has engineering meaning from solid model, and it is a key technology of CAD/CAPP/CAM integration. This paper presents an effective and efficient methodology of recognizing machining feature. In this approach, features are classified into two categories： pocket feature and predefined feature. Different feature type adopts its special hint and heuristic rule, and is helpful to recognize intersection feature. Feature classification optimizes search algorithm and shortens search scope dramatically. Meanwhile, extension and split algorithm is used to handle intersecting feature. Moreover, feature mapping based on machining knowledge is introduced to support downstream application better. Finally, case studies with complex intersecting features prove that the developed approach has stronger recognizing ability.
基金supported by the International Science and Technology Cooperation Project,Ministry of Science and Technology,China(2015DFG32170)
文摘Amino acids are the dominant organic components of processed animal proteins,however there has been limited investigation of differences in their composition between various protein sources.Information on these differences will not only be helpful for their further utilization but also provide fundamental information for developing species-specific identification methods.In this study,self-organizing feature maps(SOFM) were used to visualize amino acid composition of fish meal,and meat and bone meal(MBM) produced from poultry,ruminants and swine.SOFM display the similarities and differences in amino acid composition between protein sources and effectively improve data transparency.Amino acid composition was shown to be useful for distinguishing fish meal from MBM due to their large concentration differences between glycine,lysine and proline.However,the amino acid composition of the three MBMs was quite similar.The SOFM results were consistent with those obtained by analysis of variance and principal component analysis but more straightforward.SOFM was shown to have a robust sample linkage capacity and to be able to act as a powerful means to link different sample for further data mining.
基金supported by the National Natural Science Foundation of China(No.62241109)the Tianjin Science and Technology Commissioner Project(No.20YDTPJC01110)。
文摘An improved model based on you only look once version 8(YOLOv8)is proposed to solve the problem of low detection accuracy due to the diversity of object sizes in optical remote sensing images.Firstly,the feature pyramid network(FPN)structure of the original YOLOv8 mode is replaced by the generalized-FPN(GFPN)structure in GiraffeDet to realize the"cross-layer"and"cross-scale"adaptive feature fusion,to enrich the semantic information and spatial information on the feature map to improve the target detection ability of the model.Secondly,a pyramid-pool module of multi atrous spatial pyramid pooling(MASPP)is designed by using the idea of atrous convolution and feature pyramid structure to extract multi-scale features,so as to improve the processing ability of the model for multi-scale objects.The experimental results show that the detection accuracy of the improved YOLOv8 model on DIOR dataset is 92%and mean average precision(mAP)is 87.9%,respectively 3.5%and 1.7%higher than those of the original model.It is proved the detection and classification ability of the proposed model on multi-dimensional optical remote sensing target has been improved.
基金funded by the Deanship of Scientific Research at Northern Border University,Arar,Saudi Arabia through research group No.(RG-NBU-2022-1234).
文摘Transportation systems are experiencing a significant transformation due to the integration of advanced technologies, including artificial intelligence and machine learning. In the context of intelligent transportation systems (ITS) and Advanced Driver Assistance Systems (ADAS), the development of efficient and reliable traffic light detection mechanisms is crucial for enhancing road safety and traffic management. This paper presents an optimized convolutional neural network (CNN) framework designed to detect traffic lights in real-time within complex urban environments. Leveraging multi-scale pyramid feature maps, the proposed model addresses key challenges such as the detection of small, occluded, and low-resolution traffic lights amidst complex backgrounds. The integration of dilated convolutions, Region of Interest (ROI) alignment, and Soft Non-Maximum Suppression (Soft-NMS) further improves detection accuracy and reduces false positives. By optimizing computational efficiency and parameter complexity, the framework is designed to operate seamlessly on embedded systems, ensuring robust performance in real-world applications. Extensive experiments using real-world datasets demonstrate that our model significantly outperforms existing methods, providing a scalable solution for ITS and ADAS applications. This research contributes to the advancement of Artificial Intelligence-driven (AI-driven) pattern recognition in transportation systems and offers a mathematical approach to improving efficiency and safety in logistics and transportation networks.
基金supported by the National Natural Science Foundation ofChina under Grant 61602253, U1836208, U1536206, U1836110, 61672294, in part by theNational Key R&D Program of China under Grant 2018YFB1003205, in part by the PriorityAcademic Program Development of Jiangsu Higher Education Institutions (PAPD) fund, inpart by the Collaborative Innovation Center of Atmospheric Environment and EquipmentTechnology (CICAEET) fund, China, and in part by MOST under contracts 108-2634-F-259-001- through Pervasive Artificial Intelligence Research (PAIR) Labs, Taiwan.
文摘Recently, image representations derived by convolutional neural networks(CNN) have achieved promising performance for instance retrieval, and they outperformthe traditional hand-crafted image features. However, most of existing CNN-based featuresare proposed to describe the entire images, and thus they are less robust to backgroundclutter. This paper proposes a region of interest (RoI)-based deep convolutionalrepresentation for instance retrieval. It first detects the region of interests (RoIs) from animage, and then extracts a set of RoI-based CNN features from the fully-connected layerof CNN. The proposed RoI-based CNN feature describes the patterns of the detected RoIs,so that the visual matching can be implemented at image region-level to effectively identifytarget objects from cluttered backgrounds. Moreover, we test the performance of theproposed RoI-based CNN feature, when it is extracted from different convolutional layersor fully-connected layers. Also, we compare the performance of RoI-based CNN featurewith those of the state-of-the-art CNN features on two instance retrieval benchmarks.Experimental results show that the proposed RoI-based CNN feature provides superiorperformance than the state-of-the-art CNN features for in-stance retrieval.
文摘Pattern recognition of seismic and mor- phostructural nodes plays an important role in seismic hazard assessment. This is a known fact in seismology that tectonic nodes are prone areas to large earthquake and have this potential. They are identified by morphostructural analysis. In this study, the Alborz region has considered as studied case and locations of future events are forecast based on Kohonen Self-Organized Neural Network. It has been shown how it can predict the location of earthquake, and identifies seismogenic nodes which are prone to earthquake of M5.5＋ at the West of Alborz in Iran by using International Institute Earthquake Engineering and Seismology earthquake catalogs data. First, the main faults and tectonic lineaments have been identified based on MZ （land zoning method） method. After that, by using pattern recognition, we generalized past recorded events to future in order to show the region of probable future earthquakes. In other word, hazardous nodes have determined among all nodes by new catalog generated Self-organizing feature maps （SOFM）. Our input data are extracted from catalog, consists longitude and latitude of past event between 1980-2015 with magnitude larger or equal to 4.5. It has concluded node D1 is candidate for big earthquakes in comparison with other nodes and other nodes are in lower levels of this potential.
基金supported in part by the National Science Foundation of China(52371372)the Project of Science and Technology Commission of Shanghai Municipality,China(22JC1401400,21190780300)the 111 Project,China(D18003)
文摘Dear Editor,This letter focuses on the fact that small objects with few pixels disappear in feature maps with large receptive fields, as the network deepens, in object detection tasks. Therefore, the detection of dense small objects is challenging.
基金supported by the Shanghai Sailing Program,China (No.20YF1447600)the Research Start-Up Project of Shanghai Institute of Technology (No.YJ2021-60)+1 种基金the Collaborative Innovation Project of Shanghai Institute of Technology (No.XTCX2020-12)the Science and Technology Talent Development Fund for Young and Middle-Aged Teachers at Shanghai Institute of Technology (No.ZQ2022-6)。
文摘There is a problem of real-time detection difficulty in road surface damage detection. This paper proposes an improved lightweight model based on you only look once version 5(YOLOv5). Firstly, this paper fully utilized the convolutional neural network(CNN) + ghosting bottleneck(G_bneck) architecture to reduce redundant feature maps. Afterwards, we upgraded the original upsampling algorithm to content-aware reassembly of features(CARAFE) and increased the receptive field. Finally, we replaced the spatial pyramid pooling fast(SPPF) module with the basic receptive field block(Basic RFB) pooling module and added dilated convolution. After comparative experiments, we can see that the number of parameters and model size of the improved algorithm in this paper have been reduced by nearly half compared to the YOLOv5s. The frame rate per second(FPS) has been increased by 3.25 times. The mean average precision(m AP@0.5: 0.95) has increased by 8%—17% compared to other lightweight algorithms.
文摘Currently,there are many limitations to classify images of small objects.In addition,there are limitations such as error detection due to external factors,and there is also a disadvantage that it is difficult to accurately distinguish between various objects.This paper uses a convolutional neural network(CNN)algorithm to recognize and classify object images of very small moths and obtain precise data images.A convolution neural network algorithm is used for image data classification,and the classified image is transformed into image data to learn the topological structure of the image.To improve the accuracy of the image classification and reduce the loss rate,a parameter for finding a fast-optimal point of image classification is set by a convolutional neural network and a pixel image as a preprocessor.As a result of this study,we applied a convolution neural network algorithm to classify the images of very small moths by capturing precise images of the moths.Experimental results showed that the accuracy of classification of very small moths was more than 90%.
基金support of the Secretaría Nacional de Ciencia,Tecnología e Innovación(SENACYT)under Grant IDDSE19-007the Agencia Nacional de Investigación y Desarrollo(ANID)under Grants Fondecyt 1230135 and Fondef TA24I10002the Sistema Nacional de Investigación(SNI)of Panama under Grant 16-2021.
文摘Electrical insulation faults produce partial discharges(PD),which can be analysed to identify specific types of defects.PD clustering is a widely used method to identify PD sources,although its success depends largely on the feature maps used.In this paper,three widely used feature maps,or separation maps,are compared:chromatic,energy wavelet with principal component analysis(EW-PCA),and time-frequency(TF).To compare and evaluate,five scenarios with multi-PD environments with noise were developed.The clustering ability of the maps was evaluated using two performance indicators:intercluster distance and intracluster distance.The results indicate that the EW-PCA map performed the best in all scenarios,correctly identifying the largest number of data points and producing the clearest and most distinct clusters.The TF map created distinct clusters in several scenarios,but not all.The chromatic map created distinct clusters in all scenarios but was not as well defined as the other two separation maps.Given the results,it is important in fieldwork to use a wide range of PD clustering,accompanied by performance metrics that support a less biased decision tailored to the test object.
基金This paper was supported by the 2018 Science and Technology Breakthrough Project of Henan Provincial Science and Technology Department(No.182102310694).
文摘As an interdisciplinary comprehensive subject involving multidisciplinary knowledge,emotional analysis has become a hot topic in psychology,health medicine and computer science.It has a high comprehensive and practical application value.Emotion research based on the social network is a relatively new topic in the field of psychology and medical health research.The text emotion analysis of college students also has an important research significance for the emotional state of students at a certain time or a certain period,so as to understand their normal state,abnormal state and the reason of state change from the information they wrote.In view of the fact that convolutional neural network cannot make full use of the unique emotional information in sentences,and the need to label a large number of highquality training sets for emotional analysis to improve the accuracy of the model,an emotional analysismodel using the emotional dictionary andmultichannel convolutional neural network is proposed in this paper.Firstly,the input matrix of emotion dictionary is constructed according to the emotion information,and the different feature information of sentences is combined to form different network input channels,so that the model can learn the emotion information of input sentences from various feature representations in the training process.Then,the loss function is reconstructed to realize the semi supervised learning of the network.Finally,experiments are carried on COAE 2014 and self-built data sets.The proposed model can not only extract more semantic information in emotional text,but also learn the hidden emotional information in emotional text.The experimental results show that the proposed emotion analysis model can achieve a better classification performance.Compared with the best benchmark model gram-CNN,the F1 value can be increased by 0.026 in the self-built data set,and it can be increased by 0.032 in the COAE 2014 data set.
基金High Education Research Project Funding(No.2018C-11)Natural Science Fund of Gansu Province(Nos.18JR3RA107,1610RJYA034)Key Research and Development Program of Gansu Province(No.17YF1WA 158)。
文摘In order to diagnose the common faults of railway switch control circuit,a fault diagnosis method based on density-based spatial clustering of applications with noise(DBSCAN)and self-organizing feature map(SOM)is proposed.Firstly,the three-phase current curve of the switch machine recorded by the micro-computer monitoring system is dealt with segmentally and then the feature parameters of the three-phase current are calculated according to the action principle of the switch machine.Due to the high dimension of initial features,the DBSCAN algorithm is used to separate the sensitive features of fault diagnosis and construct the diagnostic sensitive feature set.Then,the particle swarm optimization(PSO)algorithm is used to adjust the weight of SOM network to modify the rules to avoid“dead neurons”.Finally,the PSO-SOM network fault classifier is designed to complete the classification and diagnosis of the samples to be tested.The experimental results show that this method can judge the fault mode of switch control circuit with less training samples,and the accuracy of fault diagnosis is higher than that of traditional SOM network.
