The Uludağ Range of northwest Türkiye forms a key tectonic boundary between the North Anatolian Fault Zone and the Western Anatolia Extensional Region, where active deformation is expressed across a network of st...The Uludağ Range of northwest Türkiye forms a key tectonic boundary between the North Anatolian Fault Zone and the Western Anatolia Extensional Region, where active deformation is expressed across a network of strike-slip and normal faults. To investigate how fault segmentation and kinematics control landscape evolution in this complex orogen, we integrate high-resolution morphometric analysis with paleoseismological data. We extracted key morphometric indices-including Δ-relief, Δ-elevation, Δ-gradient, Δχ, hypsometric integral, channel concavity(m/n), normalized channel steepness(ksn), and knickpoint distribution-from 10-meter DEMs using open-source geomorphic toolkits. Our results demonstrate pronounced spatial variability in geomorphic signatures and tectonic activity across four divide segments(DS). DS01, associated with the right-lateral Ulubat Fault, exhibits exceptional morphometric stability and minimal disequilibrium, in line with long earthquake recurrence intervals and low Holocene slip rates. In contrast, DS02 and DS03-bounded by the Bursa and Soğukpınar faults-display χ-based divide migration and subtle landscape adjustment. DS04, influenced by the İnegöl and Oylat faults, is characterized by elevated channel steepness, dense knickpoint clustering, and southward divide migration, collectively indicating ongoing uplift and transient drainage adjustment. The strong correspondence between morphometric disequilibrium and documented earthquake recurrence patterns highlights the critical value of integrating geomorphic and paleoseismological datasets. Our findings demonstrate that only through the convergence and cross-validation of multiple independent metrics can the segmented imprint of active deformation be reliably detected-particularly where landscape response is temporally offset from fault activity. The methodological framework developed here provides a robust template for quantifying active structures and their geomorphic consequences and can be widely applied to other tectonically complex mountain belts for seismic hazard assessment and landscape evolution studies.展开更多
This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region...This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10--14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low （2-4 mm/a） and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7-9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and theologically layered. The upper crust seems to be decoupled from the lower crust through a decollement zone at a depth of 15-20 kin, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this decollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.展开更多
A recent correlation of stream geomorphic indices to fault activity has revealed that stream geomorphologies in bedrock mountain areas are good records of local fault movements. The Daqingshan piedmont fault is one of...A recent correlation of stream geomorphic indices to fault activity has revealed that stream geomorphologies in bedrock mountain areas are good records of local fault movements. The Daqingshan piedmont fault is one of the main active faults in the fault system on the northern margin of the Hetao Basin and has produced frequent large-scale earthquakes since the Late Pleistocene. In the present study, following the segmentation regime of previous studies, we divide the fault zone into five segments, namely, the Baotou, Tuyouqi West, Tuzuoqi West, Bikeqi, and Hohhot segments, and we discuss the relationship between the drainage basin geomorphology and the piedmont fault activity in the Daqingshan area using 30 m spatial resolution Shuttle Radar Topography Mission(SRTM) digital elevation model(DEM) data. We use a range of geomorphic indices to examine the drainage basins in the Daqingshan area, including the channel steepness index(ksn), slope, hypsometric integral(HI), relief degree of land surface(RDLS), and stream lengthgradient index(SL), extracted with ArcGIS and MATLAB, and we also consider local lithologic and climate aspects. Furthermore, we compare the geomorphic indices with the slip rates of individual segments of the Daqingshan piedmont fault and paleoseismic data. The results show that the geomorphic indices of drainage basins in the Daqingshan area are primarily affected by the piedmont fault activity in the Daqingshan area. The geomorphic indices also demonstrate that piedmont fault activity has been the most intense in the middle segment of this fault system since the Late Quaternary and decreases towards the two sides.展开更多
The detailed geological mapping, conducted in the Damxung-Yangbajain basin, shows that there are many types of deposits formed since the Pliocene. The oldest sediments are formed during the Pliocene. The most prominen...The detailed geological mapping, conducted in the Damxung-Yangbajain basin, shows that there are many types of deposits formed since the Pliocene. The oldest sediments are formed during the Pliocene. The most prominent sediments are three sets of moraines and fluvioglacial deposits. The ESR, U-series and OSL dates indicate they are formed about 700-500 ka B.P., 250-125 ka B.P. and 75-12 ka B.P. respectively and indicate that there are three glacial periods since the mid-Pleistocene in the Nyainqentanglha Range. Along the southeast side of the Nyainqentanglha Range, the main southeast dipping fault zone which bounds the Damxung-Yangbajain Graben on its western edge was mapped. The fault zone consists of three secondary fault zones and their initiation ages that the fault zones became active gradually decrease southeastward. Prominent faulting occurred in about 700-500 ka B.P., 350-220 ka B.P., -140 ka B.P. and 70-50 ka B.P. since the mid-Pleistocene. The height of fault scarps which offset the sediments formed since the mid-Pleistocene suggest that the vertical slip rates change between 0.4 -2 mm/a and the cumulative average vertical movement at rates of 1.1±0.3 mm/a during the Quaternary period and the Holocene vertical throw rate is 1.4±0.6 mm/a along the fault zones on the western side of the Damxung-Yangbajain Graben.展开更多
The geology and tectonics in the eastern margin of Tibetan Plateau are complex. The main tectonic framework is composed of blocks and faults. Using discontinuous global positioning system survey data for 2008–2014, t...The geology and tectonics in the eastern margin of Tibetan Plateau are complex. The main tectonic framework is composed of blocks and faults. Using discontinuous global positioning system survey data for 2008–2014, the velocity field for the Eurasia reference framework was obtained. Based on the velocity field, the present-day velocities of the blocks and boundary faults were estimated. The results reveal that the movement rates of the Chuan-Qing, South China, Chuan-Dian and Indo-China blocks are（17.02±0.60） mm/a,（8.77±1.51） mm/a,（13.85±1.31） mm/a and（6.84 ± 0.74） mm/a, respectively, and their movement directions are 99.5°, 120.3°, 142.9° and 153.3°, respectively. All blocks exhibit clockwise rotation. The displacement rates of the Xianshuihe, Longmenshan, Anninghe, Zemuhe, Xiaojiang and Red River faults are（7.30±1.25–8.30±1.26） mm/a,（10.07±0.97–11.79±0.89） mm/a,（0.96±0.74–2.98±1.73） mm/a,（2.03±0.49–3.20±0.73） mm/a,（3.45±0.40–6.02±0.50） mm/a and（6.23±0.56） mm/a, respectively. The Xianshuihe, Anninghe, Zemuhe and Xiaojiang faults show leftlateral strike-slip movement, while the Longmenshan and Red River faults show right-lateral strikeslip. These characteristics of the blocks and faults are related to the particular tectonic location and dynamic mechanism.展开更多
The Yinwashan and Xinminpu faults are located in the Jiuxi Basin in the western end of the Hexi Corridor. The determination of their activity and slip rates is of great significance for understanding the eastward exte...The Yinwashan and Xinminpu faults are located in the Jiuxi Basin in the western end of the Hexi Corridor. The determination of their activity and slip rates is of great significance for understanding the eastward extension of the Altyn Tagh fault. Based on geological and geomorphologic field survey, trench excavation, optically stimulated luminescence dating, we define the fault geometry and kinematic properties of the two faults. Based on fault scarps measurement using differential GPS and 10 Be surface exposure dating, we determined vertical slip rate of 0.09±0.01 mm/yr for the Yinwashan fault and 0.1±0.02 mm/yr for the Xinminpu fault. Using the dips observed in trenches and natural sections, we estimated horizontal shortening rates of 0.05±0.03 and 0.23±0.06 mm/yr, respectively. No significant strike slip motion is observed on these two faults, and we infer that this region was dominated by horizontal shortening in the Late Quaternary. Although the shortening rate is quite low on each individual fault, together with other faults in this area, these two faults have an essential role in transferring slip from the eastern end of the Altyn Tagh fault and in accommodating the northeastward growth of Tibetan Plateau.展开更多
Lateral migration of fault activity in Weihe basin is a popular phenomenon and its characteristics are also typical. Taking the activity migrations of Wangshun Mountain piedmont fault toward Lishan piedmont fault and ...Lateral migration of fault activity in Weihe basin is a popular phenomenon and its characteristics are also typical. Taking the activity migrations of Wangshun Mountain piedmont fault toward Lishan piedmont fault and Weinan platform front fault, Dabaopi-Niujiaojian fault toward Shenyusi-Xiaojiazhai fault, among a serial of NE-trending faults from Baoji city to Jingyang County as examples, their migration time and process are analyzed and discussed in the present paper. It is useful for further understanding the structure development and physiognomy evolution history of Weihe basin.展开更多
The Anninghe fault is one of the significant earthquake-generating fault zones in the Southwest China. Local historical record shows that a M2≥7 strong earthquake occurred in the year of 1536. On the basis of the det...The Anninghe fault is one of the significant earthquake-generating fault zones in the Southwest China. Local historical record shows that a M2≥7 strong earthquake occurred in the year of 1536. On the basis of the detailed air-photographic interpretation and field investigation, we have acquired the following knowledge： ① The average sinistral strike-slip rate since the Late Pleistocene is about 3～7 mm/a; ② There is important reverse faulting along the fault zone besides the main left-lateral strike-slip motion, and the shortening rate across the Anninghe fault zone due to the reverse faulting is about 1.7-4.0 mm/a. If the Xianshuihe fault zone is simply partitioned into the Anninghe and Daliangshan faults, we can also get a slip rate of 3-7 mm/a along the Daliangshan fault zone, which is the same as that on the Anninghe fault zone. Moreover, on the basis of our field investigation and the latest knowledge concerning the active tectonics of Tibetan crust, we create a dynamic model for the Anninghe fault zone.展开更多
The Yangtze River Economic Belt(YREB)spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and presentday crustal deformation.Activ...The Yangtze River Economic Belt(YREB)spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and presentday crustal deformation.Active faults and seismic activity are important geological factors for the planning and development of the YREB.In this paper,the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings,using both remote-sensing data and geological survey results.The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed.The main active fault zones in the western YREB,together with the neighboring regional active faults,make up an arc fault block region comprising primarily of Sichuan-Yunnan and a“Sichuan-Yunnan arc rotational-shear active tectonic system”strong deformation region that features rotation,shear and extensional deformation.The active faults in the central-eastern YREB,with seven NE-NNE and seven NW-NWW active faults(the“7-longitudinal,7-horizontal”pattern),macroscopically make up a“chessboard tectonic system”medium-weak deformation region in the geomechanical tectonic system.They are also the main geological constraints for the crustal stability of the YREB.展开更多
The Qilian （祁连） Mountain is an active orogenic belt located at the northeastern margin of the Tibetan Plateau. During the process of continuous convergence between Indian and Eurasian plates, the Qilian Mountain g...The Qilian （祁连） Mountain is an active orogenic belt located at the northeastern margin of the Tibetan Plateau. During the process of continuous convergence between Indian and Eurasian plates, the Qilian Mountain grow correspondingly by means of reaction of old faults and generation of new ones. Here we present apatite fission-track data along a river profile crossing three minor fault （the Minle （民乐）-Damaying （大马营） fault, the Huangcheng （皇城）-Taerzhuang （塔尔庄） fault and the Kangningqiao （唐宁桥） fault） which compose the North Qilian fault （NQF） to test the timing and pat- terns of the fault activities. Apatite fission-track （AFT） results indicate that these minor faults expe- rienced two active phases in the Cretaceous and the Oligocene-Miocene. Further research indicate that the initiation timing of faulting became younger northward in both active periods and the later phase probably more active than the former phase. These tectonic activities might be highly related to the docking of the Lhasa Block to the south in the Cretaceous and uplift and expansion of the Tibetan Pla- teau in the Cenozoic.展开更多
In this paper, we focus on the characteristics of the landslides developed in the epicentral area of AD 1556 M^8.5 Huaxian Earthquake, and discuss their relations to the active normal faults in the SE Weihe Graben, Ce...In this paper, we focus on the characteristics of the landslides developed in the epicentral area of AD 1556 M^8.5 Huaxian Earthquake, and discuss their relations to the active normal faults in the SE Weihe Graben, Central China. The results from analyzing high-resolution remote-sensing imagery and digital elevation models（DEMs）, in combination with field survey, demonstrate that：（i） the landslides observed in the study area range from small-scale debris/rock falls to large-scale rock avalanches;（ii） the landslides are mostly developed upon steep slopes of ≥30°; and（iii） the step-like normal-fault scarps along the range-fronts of the Huashan Mountains as well as the thick loess sediments in the Weinan area may facilitate the occurrence of large landslides. The results presented in this study would be helpful to assess the potential landslide hazards in densely-populated areas affected by active normal faulting.展开更多
The 1605 M7½ Earthquake is the only earthquake in the history of China that has caused large-scale land subsidence into the sea,with the total area of land subsidence exceeding 100 km2.The disaster has led to the...The 1605 M7½ Earthquake is the only earthquake in the history of China that has caused large-scale land subsidence into the sea,with the total area of land subsidence exceeding 100 km2.The disaster has led to the sinking of 72 villages.There is still no clear understanding of the source seismogenic fault of this earthquake.In this work,we conducted a detailed study of the middle segment of the Maniao-Puqian fault(MPF),which is the epicenter area,through geomorphological survey,data collection,shallow seismic exploration,cross-section drilling,and chronological dating.The results showed that the middle segment of the MPF zone is composed of three nearly parallel normal faults with a dextral strike-slip:“Macun-Luodou fault(F2-1),Haixiu-Dongyuan fault(F2-2),and ChangliuZhuxihe fault(F2-3)”.And F2-2 is composed of two secondary faults,namely F2-2′and F2-2″,with a flower-shaped structure buried under the ground.It is distributed nearly east-west,dipping to the north and has experienced at least five stages of activities since the Miocene.The vertical activity rates of F2-2′and F2-2″are~2.32 and~2.5 mm/a,since the Holocene,respectively.There were eight cycles of transgression and regression since the Miocene.The fault activity resulted in the thickening of the Holocene strata with a slight dip to the south,on the hanging wall,showing V-shaped characteristics.The MPF is likely the source seismogenic fault of the M7½ earthquake that hit Qiongshan in 1605.展开更多
On the basis of a 3-dimension visco-elastic finite element model of lithosphere in North China, we numerically simulate the recent mutative figures of tectonic stress field. Annual change characteristics of stress fie...On the basis of a 3-dimension visco-elastic finite element model of lithosphere in North China, we numerically simulate the recent mutative figures of tectonic stress field. Annual change characteristics of stress field are： 1 ） Maximum principal tensile stress is about 3 -9 kPaa-1 and its azimuth lie in NNW-SSE. 2） Maximum principal compressive stress is about 1 - 6 kPaa-1 and its azimuth lie in NEE-SWW. 3 ） Maximum principal tensile stress is higher both in the west region and Liaoning Province. 4） Variation of tectonic stress field benefits fault movement in the west part and northeast part of North China. 5 ）Annual accumulative rates of Coulomb fracture stress in Tanlu fault belt have segmentation patterns： Jiashan-Guangji segment is the high- est （6 kPaa - 1 ） , Anshan-Liaodongwan segment is the second （5 kPaa - l ） , and others are relatively lower （ 3 - 4 kPaa-1 ）.展开更多
Lanzhou Institute of Seismology, China Seismological Bureau, Lanzhou 730000, China 2) Institute of Geology, China Seismological Bureau, Beijing 100029, China
The Lajishan Mountain fault zone consists of two NE_protruding arcuate faults, i.e. the northern and southern margin fault of Lajishan Mountain with the fault length of 230km and 220km respectively. The fault zone is ...The Lajishan Mountain fault zone consists of two NE_protruding arcuate faults, i.e. the northern and southern margin fault of Lajishan Mountain with the fault length of 230km and 220km respectively. The fault zone is located in the large_scale compressional structure zone and tectonic gradient zone in_between the NNW_trending right_lateral strike_slip Reshui_Riyueshan fault zone and the NWW_trending left_lateral strike_slip northern margin of west Qinling Ranges fault zone is also an important boundary fault zone, separating the Xining_Minhe basin and the Xunhua_Hualong basin at the southern and northern sides of the Lajishan Mountain respectively. Geologic geomorphic evidences of new activity revealed by field investigations indicate that the latest movement of the Lajishan fault zone was in late Epipleistocene (only a few segments were active in early Holocene) and is mainly of compressive thrusting with slightly left_lateral strike_slip component. The above movement has possibly resulted in the occurrence of about 20 moderate earthquakes of magnitude around 5.0. The Lajishan region can therefore be regarded as a seismotectonic window to reflect tectonic movement and earthquake activity.展开更多
Objective The lateral extrusion eastward of the Tibetan Plateau leads to the formation of the Sichuan–Yunnan block, which is the most representative active block in the southeastern margin of the Tibetan Plateau, cha...Objective The lateral extrusion eastward of the Tibetan Plateau leads to the formation of the Sichuan–Yunnan block, which is the most representative active block in the southeastern margin of the Tibetan Plateau, characterized by strong and frequent seismicity(Li Ping et al., 1975; Zhang Peizhen et al., 2003; Li Yong et al., 2017). Its eastern boundary is composed of sinistral faults including the Xianshuihe, Xiaojiang faults, etc., and the western展开更多
The Luhuatai fault is one of the important buried tectonics in the Yinchuan basin. Based on the results of shallow seismic exploration, we conducted composite drilling section exploration and dating of the samples fro...The Luhuatai fault is one of the important buried tectonics in the Yinchuan basin. Based on the results of shallow seismic exploration, we conducted composite drilling section exploration and dating of the samples from boreholes. Some useful data was obtained, such as the depth of the upper breaking point, the latest activity age, displacement in the late Quaternary, and slip rates, etc. This study shows that the activity is different between the north and south segment along the Luhuatai fault. The north segment is a Holocene fault, while the south segment is a late mid-Pleistocene fault. From north to south along the north segment of Luhuatai fault, the activity has been enhanced, and the faulting is stronger in late Pleistocene than Holocene.展开更多
By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are disc...By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are discussed in different time intervals and fault segments.The results suggest that the intensity of activity along the fault zone is not strong,but the differences between different time intervals and fault segments since the late Pleistocene have been obvious.The average rates range from 0.23 mm/a to 1.62 mm/a.The largest average rate is 1.40 mm/a,which occurred in the early and middle of late Pleistocene along the western segment of the fault zone.Since the late stage of the late Pleistocene,the center of faulting activity of the fault zone has shifted to the middle segment,and the average slip rates range have changed from 1.30 mm/a to 1.63 mm/a.展开更多
The location and late Quaternary activity of the Central-North Segment of the Taihang Mountains Piedmont fault zone have been studied by shallow seismic survey and combined drill exploration.Our results show that the ...The location and late Quaternary activity of the Central-North Segment of the Taihang Mountains Piedmont fault zone have been studied by shallow seismic survey and combined drill exploration.Our results show that the Baoding-Shijiazhuang fault and the Xushui fault were active in the late Pleistocene,but the south Xushui fault has been inactive since the late Pleistocene.The maximum magnitude of potential earthquake of the faults is 6.0.展开更多
The Xiannushan and Jiuwanxi are the two major fracture belts adjacent to the Three Gorges Dam Site. Apatites are selected from fracture clay and fracture\|cliff rock in the fracture belts and examined with the fission...The Xiannushan and Jiuwanxi are the two major fracture belts adjacent to the Three Gorges Dam Site. Apatites are selected from fracture clay and fracture\|cliff rock in the fracture belts and examined with the fission track dating method. Our study shows that the Xiannushan and Jiuwanxi fracture belts were tectonically active at 0.60±0.04Ma and 0.29±0.04Ma ago, respectively. Their ages are close to those obtained by the U\|series method.展开更多
基金supported by the Disaster and Emergency Management Authority of Türkiye(AFAD)under the project code UDAP-G-18-01。
文摘The Uludağ Range of northwest Türkiye forms a key tectonic boundary between the North Anatolian Fault Zone and the Western Anatolia Extensional Region, where active deformation is expressed across a network of strike-slip and normal faults. To investigate how fault segmentation and kinematics control landscape evolution in this complex orogen, we integrate high-resolution morphometric analysis with paleoseismological data. We extracted key morphometric indices-including Δ-relief, Δ-elevation, Δ-gradient, Δχ, hypsometric integral, channel concavity(m/n), normalized channel steepness(ksn), and knickpoint distribution-from 10-meter DEMs using open-source geomorphic toolkits. Our results demonstrate pronounced spatial variability in geomorphic signatures and tectonic activity across four divide segments(DS). DS01, associated with the right-lateral Ulubat Fault, exhibits exceptional morphometric stability and minimal disequilibrium, in line with long earthquake recurrence intervals and low Holocene slip rates. In contrast, DS02 and DS03-bounded by the Bursa and Soğukpınar faults-display χ-based divide migration and subtle landscape adjustment. DS04, influenced by the İnegöl and Oylat faults, is characterized by elevated channel steepness, dense knickpoint clustering, and southward divide migration, collectively indicating ongoing uplift and transient drainage adjustment. The strong correspondence between morphometric disequilibrium and documented earthquake recurrence patterns highlights the critical value of integrating geomorphic and paleoseismological datasets. Our findings demonstrate that only through the convergence and cross-validation of multiple independent metrics can the segmented imprint of active deformation be reliably detected-particularly where landscape response is temporally offset from fault activity. The methodological framework developed here provides a robust template for quantifying active structures and their geomorphic consequences and can be widely applied to other tectonically complex mountain belts for seismic hazard assessment and landscape evolution studies.
基金the auspice of National Key Basic Project(973)(granted number 2008CB425702)National Science and Technology Project(granted Number SinoProbe-08)China Geological Survey project(granted number1212010670104)
文摘This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10--14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low （2-4 mm/a） and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7-9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and theologically layered. The upper crust seems to be decoupled from the lower crust through a decollement zone at a depth of 15-20 kin, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this decollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.
基金supported by a research grant from the Institute of Crustal Dynamics,China Earthquake Administration(No.ZDJ2019-21)the National Natural Science Foundation of China(Nos.41872227,41602221)。
文摘A recent correlation of stream geomorphic indices to fault activity has revealed that stream geomorphologies in bedrock mountain areas are good records of local fault movements. The Daqingshan piedmont fault is one of the main active faults in the fault system on the northern margin of the Hetao Basin and has produced frequent large-scale earthquakes since the Late Pleistocene. In the present study, following the segmentation regime of previous studies, we divide the fault zone into five segments, namely, the Baotou, Tuyouqi West, Tuzuoqi West, Bikeqi, and Hohhot segments, and we discuss the relationship between the drainage basin geomorphology and the piedmont fault activity in the Daqingshan area using 30 m spatial resolution Shuttle Radar Topography Mission(SRTM) digital elevation model(DEM) data. We use a range of geomorphic indices to examine the drainage basins in the Daqingshan area, including the channel steepness index(ksn), slope, hypsometric integral(HI), relief degree of land surface(RDLS), and stream lengthgradient index(SL), extracted with ArcGIS and MATLAB, and we also consider local lithologic and climate aspects. Furthermore, we compare the geomorphic indices with the slip rates of individual segments of the Daqingshan piedmont fault and paleoseismic data. The results show that the geomorphic indices of drainage basins in the Daqingshan area are primarily affected by the piedmont fault activity in the Daqingshan area. The geomorphic indices also demonstrate that piedmont fault activity has been the most intense in the middle segment of this fault system since the Late Quaternary and decreases towards the two sides.
文摘The detailed geological mapping, conducted in the Damxung-Yangbajain basin, shows that there are many types of deposits formed since the Pliocene. The oldest sediments are formed during the Pliocene. The most prominent sediments are three sets of moraines and fluvioglacial deposits. The ESR, U-series and OSL dates indicate they are formed about 700-500 ka B.P., 250-125 ka B.P. and 75-12 ka B.P. respectively and indicate that there are three glacial periods since the mid-Pleistocene in the Nyainqentanglha Range. Along the southeast side of the Nyainqentanglha Range, the main southeast dipping fault zone which bounds the Damxung-Yangbajain Graben on its western edge was mapped. The fault zone consists of three secondary fault zones and their initiation ages that the fault zones became active gradually decrease southeastward. Prominent faulting occurred in about 700-500 ka B.P., 350-220 ka B.P., -140 ka B.P. and 70-50 ka B.P. since the mid-Pleistocene. The height of fault scarps which offset the sediments formed since the mid-Pleistocene suggest that the vertical slip rates change between 0.4 -2 mm/a and the cumulative average vertical movement at rates of 1.1±0.3 mm/a during the Quaternary period and the Holocene vertical throw rate is 1.4±0.6 mm/a along the fault zones on the western side of the Damxung-Yangbajain Graben.
基金supported by a geological survey project of the China Geological Survey(No.1212011140013,No.12120113009800,No.121201010000150001)
文摘The geology and tectonics in the eastern margin of Tibetan Plateau are complex. The main tectonic framework is composed of blocks and faults. Using discontinuous global positioning system survey data for 2008–2014, the velocity field for the Eurasia reference framework was obtained. Based on the velocity field, the present-day velocities of the blocks and boundary faults were estimated. The results reveal that the movement rates of the Chuan-Qing, South China, Chuan-Dian and Indo-China blocks are（17.02±0.60） mm/a,（8.77±1.51） mm/a,（13.85±1.31） mm/a and（6.84 ± 0.74） mm/a, respectively, and their movement directions are 99.5°, 120.3°, 142.9° and 153.3°, respectively. All blocks exhibit clockwise rotation. The displacement rates of the Xianshuihe, Longmenshan, Anninghe, Zemuhe, Xiaojiang and Red River faults are（7.30±1.25–8.30±1.26） mm/a,（10.07±0.97–11.79±0.89） mm/a,（0.96±0.74–2.98±1.73） mm/a,（2.03±0.49–3.20±0.73） mm/a,（3.45±0.40–6.02±0.50） mm/a and（6.23±0.56） mm/a, respectively. The Xianshuihe, Anninghe, Zemuhe and Xiaojiang faults show leftlateral strike-slip movement, while the Longmenshan and Red River faults show right-lateral strikeslip. These characteristics of the blocks and faults are related to the particular tectonic location and dynamic mechanism.
基金the Basic Research Project of Institute of Earthquake Science,CEA(No.2019IESLZ01)the National Science Foundation of China(No.41402186)。
文摘The Yinwashan and Xinminpu faults are located in the Jiuxi Basin in the western end of the Hexi Corridor. The determination of their activity and slip rates is of great significance for understanding the eastward extension of the Altyn Tagh fault. Based on geological and geomorphologic field survey, trench excavation, optically stimulated luminescence dating, we define the fault geometry and kinematic properties of the two faults. Based on fault scarps measurement using differential GPS and 10 Be surface exposure dating, we determined vertical slip rate of 0.09±0.01 mm/yr for the Yinwashan fault and 0.1±0.02 mm/yr for the Xinminpu fault. Using the dips observed in trenches and natural sections, we estimated horizontal shortening rates of 0.05±0.03 and 0.23±0.06 mm/yr, respectively. No significant strike slip motion is observed on these two faults, and we infer that this region was dominated by horizontal shortening in the Late Quaternary. Although the shortening rate is quite low on each individual fault, together with other faults in this area, these two faults have an essential role in transferring slip from the eastern end of the Altyn Tagh fault and in accommodating the northeastward growth of Tibetan Plateau.
基金Chinese Joint Seismological Science Foundation (100120) and State Key Basic Research Development and Programming Project of China (G199804070102).
文摘Lateral migration of fault activity in Weihe basin is a popular phenomenon and its characteristics are also typical. Taking the activity migrations of Wangshun Mountain piedmont fault toward Lishan piedmont fault and Weinan platform front fault, Dabaopi-Niujiaojian fault toward Shenyusi-Xiaojiazhai fault, among a serial of NE-trending faults from Baoji city to Jingyang County as examples, their migration time and process are analyzed and discussed in the present paper. It is useful for further understanding the structure development and physiognomy evolution history of Weihe basin.
基金Joint Seismological Science Foundation of China (105066)National Natural Science Foundation of China (40472109)the SASAKAWA Scientific Grant from the Japan Science Society.
文摘The Anninghe fault is one of the significant earthquake-generating fault zones in the Southwest China. Local historical record shows that a M2≥7 strong earthquake occurred in the year of 1536. On the basis of the detailed air-photographic interpretation and field investigation, we have acquired the following knowledge： ① The average sinistral strike-slip rate since the Late Pleistocene is about 3～7 mm/a; ② There is important reverse faulting along the fault zone besides the main left-lateral strike-slip motion, and the shortening rate across the Anninghe fault zone due to the reverse faulting is about 1.7-4.0 mm/a. If the Xianshuihe fault zone is simply partitioned into the Anninghe and Daliangshan faults, we can also get a slip rate of 3-7 mm/a along the Daliangshan fault zone, which is the same as that on the Anninghe fault zone. Moreover, on the basis of our field investigation and the latest knowledge concerning the active tectonics of Tibetan crust, we create a dynamic model for the Anninghe fault zone.
基金This research is funded by the China Geological Survey project(DD20160268).
文摘The Yangtze River Economic Belt(YREB)spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and presentday crustal deformation.Active faults and seismic activity are important geological factors for the planning and development of the YREB.In this paper,the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings,using both remote-sensing data and geological survey results.The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed.The main active fault zones in the western YREB,together with the neighboring regional active faults,make up an arc fault block region comprising primarily of Sichuan-Yunnan and a“Sichuan-Yunnan arc rotational-shear active tectonic system”strong deformation region that features rotation,shear and extensional deformation.The active faults in the central-eastern YREB,with seven NE-NNE and seven NW-NWW active faults(the“7-longitudinal,7-horizontal”pattern),macroscopically make up a“chessboard tectonic system”medium-weak deformation region in the geomechanical tectonic system.They are also the main geological constraints for the crustal stability of the YREB.
基金supported by the National Natural Science Foundation of China (NSFC) for Distinguished Young Scholars(No. 40925001)the NSFC Project (No. 41001003) and the NSFC Innovation Team Project (No. 41021091)
文摘The Qilian （祁连） Mountain is an active orogenic belt located at the northeastern margin of the Tibetan Plateau. During the process of continuous convergence between Indian and Eurasian plates, the Qilian Mountain grow correspondingly by means of reaction of old faults and generation of new ones. Here we present apatite fission-track data along a river profile crossing three minor fault （the Minle （民乐）-Damaying （大马营） fault, the Huangcheng （皇城）-Taerzhuang （塔尔庄） fault and the Kangningqiao （唐宁桥） fault） which compose the North Qilian fault （NQF） to test the timing and pat- terns of the fault activities. Apatite fission-track （AFT） results indicate that these minor faults expe- rienced two active phases in the Cretaceous and the Oligocene-Miocene. Further research indicate that the initiation timing of faulting became younger northward in both active periods and the later phase probably more active than the former phase. These tectonic activities might be highly related to the docking of the Lhasa Block to the south in the Cretaceous and uplift and expansion of the Tibetan Pla- teau in the Cenozoic.
基金supported by the National Natural Science Foundation of China (No. 41502203)the Scientific Research Foundation for Returned Overseas Scholars of China (awarded to G. Rao)+1 种基金the Natural Science Foundation of Zhejiang Province (No. LY15D02001)a Science Project (No. 23253002)from the Ministry of Education, Culture, Sports, Science and Technology of Japan
文摘In this paper, we focus on the characteristics of the landslides developed in the epicentral area of AD 1556 M^8.5 Huaxian Earthquake, and discuss their relations to the active normal faults in the SE Weihe Graben, Central China. The results from analyzing high-resolution remote-sensing imagery and digital elevation models（DEMs）, in combination with field survey, demonstrate that：（i） the landslides observed in the study area range from small-scale debris/rock falls to large-scale rock avalanches;（ii） the landslides are mostly developed upon steep slopes of ≥30°; and（iii） the step-like normal-fault scarps along the range-fronts of the Huashan Mountains as well as the thick loess sediments in the Weinan area may facilitate the occurrence of large landslides. The results presented in this study would be helpful to assess the potential landslide hazards in densely-populated areas affected by active normal faulting.
基金supported by the National Natural Science Foundation of China(No.42272222)the Basic Research Funds of Institute of Geomechanics,Chinese Academy of Geological Sciences(No.DZLXJK202211)China Geological Survey(Nos.DD20190306,DD20190546,DD20160269,DD20230249)。
文摘The 1605 M7½ Earthquake is the only earthquake in the history of China that has caused large-scale land subsidence into the sea,with the total area of land subsidence exceeding 100 km2.The disaster has led to the sinking of 72 villages.There is still no clear understanding of the source seismogenic fault of this earthquake.In this work,we conducted a detailed study of the middle segment of the Maniao-Puqian fault(MPF),which is the epicenter area,through geomorphological survey,data collection,shallow seismic exploration,cross-section drilling,and chronological dating.The results showed that the middle segment of the MPF zone is composed of three nearly parallel normal faults with a dextral strike-slip:“Macun-Luodou fault(F2-1),Haixiu-Dongyuan fault(F2-2),and ChangliuZhuxihe fault(F2-3)”.And F2-2 is composed of two secondary faults,namely F2-2′and F2-2″,with a flower-shaped structure buried under the ground.It is distributed nearly east-west,dipping to the north and has experienced at least five stages of activities since the Miocene.The vertical activity rates of F2-2′and F2-2″are~2.32 and~2.5 mm/a,since the Holocene,respectively.There were eight cycles of transgression and regression since the Miocene.The fault activity resulted in the thickening of the Holocene strata with a slight dip to the south,on the hanging wall,showing V-shaped characteristics.The MPF is likely the source seismogenic fault of the M7½ earthquake that hit Qiongshan in 1605.
基金supported by research grant from Institute of Crustal Dynamics,China Earthquake Administration(No.ZDJ2009-06)special research grant from Institute of Crustal Dynamics,China Earthquake Administration(No.ZDJ2007-01)
文摘On the basis of a 3-dimension visco-elastic finite element model of lithosphere in North China, we numerically simulate the recent mutative figures of tectonic stress field. Annual change characteristics of stress field are： 1 ） Maximum principal tensile stress is about 3 -9 kPaa-1 and its azimuth lie in NNW-SSE. 2） Maximum principal compressive stress is about 1 - 6 kPaa-1 and its azimuth lie in NEE-SWW. 3 ） Maximum principal tensile stress is higher both in the west region and Liaoning Province. 4） Variation of tectonic stress field benefits fault movement in the west part and northeast part of North China. 5 ）Annual accumulative rates of Coulomb fracture stress in Tanlu fault belt have segmentation patterns： Jiashan-Guangji segment is the high- est （6 kPaa - 1 ） , Anshan-Liaodongwan segment is the second （5 kPaa - l ） , and others are relatively lower （ 3 - 4 kPaa-1 ）.
基金State Key Basic Research Development and Programming Project (G19980407-04) and the Project during the ninth Five-Year Plan of Gansu Province (GK973-2-110A).
文摘Lanzhou Institute of Seismology, China Seismological Bureau, Lanzhou 730000, China 2) Institute of Geology, China Seismological Bureau, Beijing 100029, China
文摘The Lajishan Mountain fault zone consists of two NE_protruding arcuate faults, i.e. the northern and southern margin fault of Lajishan Mountain with the fault length of 230km and 220km respectively. The fault zone is located in the large_scale compressional structure zone and tectonic gradient zone in_between the NNW_trending right_lateral strike_slip Reshui_Riyueshan fault zone and the NWW_trending left_lateral strike_slip northern margin of west Qinling Ranges fault zone is also an important boundary fault zone, separating the Xining_Minhe basin and the Xunhua_Hualong basin at the southern and northern sides of the Lajishan Mountain respectively. Geologic geomorphic evidences of new activity revealed by field investigations indicate that the latest movement of the Lajishan fault zone was in late Epipleistocene (only a few segments were active in early Holocene) and is mainly of compressive thrusting with slightly left_lateral strike_slip component. The above movement has possibly resulted in the occurrence of about 20 moderate earthquakes of magnitude around 5.0. The Lajishan region can therefore be regarded as a seismotectonic window to reflect tectonic movement and earthquake activity.
基金supported by the National Science Foundation of China (grant No. 41472204)
文摘Objective The lateral extrusion eastward of the Tibetan Plateau leads to the formation of the Sichuan–Yunnan block, which is the most representative active block in the southeastern margin of the Tibetan Plateau, characterized by strong and frequent seismicity(Li Ping et al., 1975; Zhang Peizhen et al., 2003; Li Yong et al., 2017). Its eastern boundary is composed of sinistral faults including the Xianshuihe, Xiaojiang faults, etc., and the western
基金funded by the Special R&D Fund for Earthquake Study,China (201008003)
文摘The Luhuatai fault is one of the important buried tectonics in the Yinchuan basin. Based on the results of shallow seismic exploration, we conducted composite drilling section exploration and dating of the samples from boreholes. Some useful data was obtained, such as the depth of the upper breaking point, the latest activity age, displacement in the late Quaternary, and slip rates, etc. This study shows that the activity is different between the north and south segment along the Luhuatai fault. The north segment is a Holocene fault, while the south segment is a late mid-Pleistocene fault. From north to south along the north segment of Luhuatai fault, the activity has been enhanced, and the faulting is stronger in late Pleistocene than Holocene.
基金This project was sponsored by the State Seismological Bureau (85-02-3-3), China
文摘By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are discussed in different time intervals and fault segments.The results suggest that the intensity of activity along the fault zone is not strong,but the differences between different time intervals and fault segments since the late Pleistocene have been obvious.The average rates range from 0.23 mm/a to 1.62 mm/a.The largest average rate is 1.40 mm/a,which occurred in the early and middle of late Pleistocene along the western segment of the fault zone.Since the late stage of the late Pleistocene,the center of faulting activity of the fault zone has shifted to the middle segment,and the average slip rates range have changed from 1.30 mm/a to 1.63 mm/a.
基金sponsored by Active Faults Seismic Hazard Assessment in Key Earthquake Monitoring and Defensive Region of China
文摘The location and late Quaternary activity of the Central-North Segment of the Taihang Mountains Piedmont fault zone have been studied by shallow seismic survey and combined drill exploration.Our results show that the Baoding-Shijiazhuang fault and the Xushui fault were active in the late Pleistocene,but the south Xushui fault has been inactive since the late Pleistocene.The maximum magnitude of potential earthquake of the faults is 6.0.
文摘The Xiannushan and Jiuwanxi are the two major fracture belts adjacent to the Three Gorges Dam Site. Apatites are selected from fracture clay and fracture\|cliff rock in the fracture belts and examined with the fission track dating method. Our study shows that the Xiannushan and Jiuwanxi fracture belts were tectonically active at 0.60±0.04Ma and 0.29±0.04Ma ago, respectively. Their ages are close to those obtained by the U\|series method.
