In this paper, we use the matrix measure technique to study stable fault-tolerance control of networked control systems. State feedback networked control systems with the network-induced delay, parameter uncertainties...In this paper, we use the matrix measure technique to study stable fault-tolerance control of networked control systems. State feedback networked control systems with the network-induced delay, parameter uncertainties, sensor failures and actuator failures are considered. State feedback gain K is designed for any invariant delay τ, and some theorems and sufficient conditions for stable fault-tolerance control are given. Example is presented to illustrate the effectiveness of these theorems.展开更多
Realistic faults and failures often occur probabilistically in the lane-keeping system of autonomous electric vehicles,reducing system reliability and posing significant challenges to driving safety.To enhance the sys...Realistic faults and failures often occur probabilistically in the lane-keeping system of autonomous electric vehicles,reducing system reliability and posing significant challenges to driving safety.To enhance the system resilience,this paper proposes a novel robust fuzzy fault-tolerant control strategy that incorporates the adaptive event-trigger(AET)mechanism to realize stable,reliable,and precise lane-keeping control in the presence of multiple system uncertainties and probabilistic faults.First,to capture the uncertain and time-varying nature of tire cornering stiffness,an effective Takagi-Sugeno(T-S)fuzzy tire model is developed.Then,by employing the distribution-based probabilistic approach,two sets of unrelated random variables,random sensor and actuator faults in the control system,are modeled.Next,to improve communication efficiency and address ineluctable network-induced delays,an AET control framework with a well-designed triggering condition is established.Subsequently,a robust fuzzy output feedback fault-tolerant lane-keeping controller that satisfies the H∞per-formance is designed by using the Lyapunov-Krasovski functional method.Furthermore,the mean-square ex-ponential stability of the closed-loop system is rigorously guaranteed.Finally,real-time simulations based on Carsim/Simulink co-simulation platform under dynamic driving conditions demonstrate the feasibility and ef-fectiveness of the proposed control strategy.展开更多
This paper investigates the consensus tracking control problem for high order nonlinear multi-agent systems subject to non-affine faults,partial measurable states,uncertain control coefficients,and unknown external di...This paper investigates the consensus tracking control problem for high order nonlinear multi-agent systems subject to non-affine faults,partial measurable states,uncertain control coefficients,and unknown external disturbances.Under the directed topology conditions,an observer-based finite-time control strategy based on adaptive backstepping and is proposed,in which a neural network-based state observer is employed to approximate the unmeasurable system state variables.To address the complexity explosion problem associated with the backstepping method,a finite-time command filter is incorporated,with error compensation signals designed to mitigate the filter-induced errors.Additionally,the Butterworth low-pass filter is introduced to avoid the algebraic ring problem in the design of the controller.The finite-time stability of the closed-loop system is rigorously analyzed with the finite-time Lyapunov stability criterion,validating that all closed-loop signals of the system remain bounded within a finite time.Finally,the effectiveness of the proposed control strategy is verified through a simulation example.展开更多
The operating environment of the diesel engine air path system is complex and may be affected by external random disturbances.Potentially leading to faults.This paper addresses the fault-tolerant control problem of th...The operating environment of the diesel engine air path system is complex and may be affected by external random disturbances.Potentially leading to faults.This paper addresses the fault-tolerant control problem of the diesel engine air path system,assuming that the system may simultaneously be affected by actuator faults and external random disturbances,a disturbance observer-based sliding mode controller is designed.Through the linear matrix inequality technique for solving observer and controller gains,optimal gain matrices can be obtained,eliminating the manual adjustment process of controller parameters and reducing the chattering phenomenon of the sliding mode surface.Finally,the effectiveness of the proposed method is verified through simulation analysis.展开更多
The cross-domain capabilities of aerial-aquatic vehicles(AAVs)hold significant potential for future airsea integrated combat operations.However,the failure rate of AAVs is higher than that of unmanned systems operatin...The cross-domain capabilities of aerial-aquatic vehicles(AAVs)hold significant potential for future airsea integrated combat operations.However,the failure rate of AAVs is higher than that of unmanned systems operating in a single medium.To ensure the reliable and stable completion of tasks by AAVs,this paper proposes a tiltable quadcopter AAV to mitigate the potential issue of rotor failure,which can lead to high-speed spinning or damage during cross-media transitions.Experimental validation demonstrates that this tiltable quadcopter AAV can transform into a dual-rotor or triple-rotor configuration after losing one or two rotors,allowing it to perform cross-domain movements with enhanced stability and maintain task completion.This enhancement significantly improves its fault tolerance and task reliability.展开更多
Hydraulic-electric systems are widely utilized in various applications.However,over time,these systems may encounter random faults such as loose cables,ambient environmental noise,or sensor aging,leading to inaccurate...Hydraulic-electric systems are widely utilized in various applications.However,over time,these systems may encounter random faults such as loose cables,ambient environmental noise,or sensor aging,leading to inaccurate sensor readings.These faults may result in system instability or compromise safety.In this paper,we propose a fault compensation control system to mitigate the effects of sensor faults and ensure system safety.Specifically,we utilize the pressure sensor within the system to implement the control process and evaluate performance based on the piston position.First,we develop a mathematical model to identify optimal parameters for the fault estimation model based on the Lyapunov stability principle.Next,we design an unknown input observer that estimates the state vector and detects pressure sensor faults using a linear matrix inequality optimization algorithm.The estimated pressure faults are incorporated into the fault compensation control system to counteract their effects via a fault residual coefficient.The discrepancy between the feedback state and the estimated state determines this coefficient.We assess the piston position’s performance through pressure control to evaluate the proposed model’s effectiveness.Finally,the system simulation results are analyzed to validate the efficiency of the proposed model.When a pressure sensor fault occurs,the proposed approach effectively minimizes position control errors,enhancing overall system stability.When a pressure sensor fault occurs,the proposed model compensates for the fault to mitigate the impact of pressure problem,thereby enhancing the position control quality of the EHA system.The fault compensation method ensures over 90%system performance,with its effectiveness becoming more evident under pressure sensor faults.展开更多
The problem of trajectory tracking for a class of differentially driven wheeled mobile robots(WMRs)under partial loss of the effectiveness of the actuated wheels is investigated in this paper.Such actuator faults may ...The problem of trajectory tracking for a class of differentially driven wheeled mobile robots(WMRs)under partial loss of the effectiveness of the actuated wheels is investigated in this paper.Such actuator faults may cause the loss of strong controllability of the WMR,such that the conventional fault-tolerant control strategies unworkable.In this paper,a new mixed-gain adaption scheme is devised,which is adopted to adapt the gain of a decoupling prescribed performance controller to adaptively compensate for the loss of the effectiveness of the actuators.Different from the existing gain adaption technique which depends on both the barrier functions and their partial derivatives,ours involves only the barrier functions.This yields a lower magnitude of the resulting control signals.Our controller accomplishes trajectory tracking of the WMR with the prescribed rate and accuracy even in the faulty case,and the control design relies on neither the information of the WMR dynamics and the actuator faults nor the tools for function approximation,parameter identification,and fault detection or estimation.The comparative simulation results justify the theoretical findings.展开更多
Three-phase grid-connected inverters(GCIs)are essential components in distributed generation systems,where the accuracy of current measurement circuits is fundamental for reliable closed-loop operation.Nevertheless,th...Three-phase grid-connected inverters(GCIs)are essential components in distributed generation systems,where the accuracy of current measurement circuits is fundamental for reliable closed-loop operation.Nevertheless,the presence of a DC offset in the measured current can disrupt the regulation of grid currents and significantly degrade system performance.In this work,a fault-tolerant control approach is introduced to counteract the impact of such offset faults through a dedicated current compensation mechanism.The proposed solution is built around two main stages:(i)detecting and isolating DC offset faults that may appear in one or multiple phases of the measured grid currents,and(ii)estimating the fault magnitude and reconstructing the corrected current signal.The offset magnitude is obtained analytically by examining the grid current projected onto the synchronous d-axis at the grid angular frequency,eliminating the need for any additional sensing hardware.Simulation and experimental investigations conducted under several fault scenarios confirm the robustness of the proposed strategy and highlight significant improvements in detection speed and diagnostic accuracy.展开更多
This article presents an adaptive fault-tolerant tracking control strategy for unknown affine nonlinear systems subject to actuator faults and external disturbances.To address the hyperparameter initialization challen...This article presents an adaptive fault-tolerant tracking control strategy for unknown affine nonlinear systems subject to actuator faults and external disturbances.To address the hyperparameter initialization challenges inherent in conventional neural network training,an improved self-organizing radial basis function neural network(SRBFNN)with an input-dependent variable structure is developed.Furthermore,a novel selforganizing RBFNN-based observer is introduced to estimate system states across all dimensions.Leveraging the reconstructed states,the proposed adaptive controller effectively compensates for all uncertainties,including estimation errors in the observer,ensuring accurate state tracking with reduced control effort.The uniform ultimate boundedness of all closed-loop signals and tracking errors is rigorously established via Lyapunov stability analysis.Finally,simulations on two different nonlinear systems comprehensively validate the effectiveness and superiority of the proposed control approach.展开更多
The aircraft braking system is critical to ensure the safe take-off and landing of the aircraft.However,the braking system is often exposed to high temperatures and strong vibration working environments,which makes th...The aircraft braking system is critical to ensure the safe take-off and landing of the aircraft.However,the braking system is often exposed to high temperatures and strong vibration working environments,which makes the sensor prone to failure.Sensor failure has the potential to compromise aircraft safety.In order to improve the safety of the aircraft braking system,a fault detection and fault-tolerant control(FDFTC)strategy for the aircraft brake pressure sensor is designed.Firstly,a model based on a bidirectional long short-term memory(Bi-LSTM)network is constructed to estimate the brake pressure.Then,the residual sequence is obtained by comparing the measured pressure with the estimated pressure.On this basis,the improved sequential probability ratio test(SPRT)method based on mathematical statistics is applied to analyze the residual sequence to detect the fault.Finally,simulation and hardware-in-the-loop(HIL)testing results indicate that the proposed FDFTC strategy can detect sensor faults in time and efficiently complete braking when faults occur.Hence,the proposed FDFTC strategy can effectively deal with the faults of the aircraft brake pressure sensor,which is of great significance to improve the reliability and safety of the aircraft.展开更多
This paper investigates the issue of fault-tolerant control for swarm systems subject to switched graphs,actuator faults and obstacles.A geometric-based partial differential equation(PDE)framework is proposed to unify...This paper investigates the issue of fault-tolerant control for swarm systems subject to switched graphs,actuator faults and obstacles.A geometric-based partial differential equation(PDE)framework is proposed to unify collision-free trajectory generation and fault-tolerant control.To deal with the fault-induced force imbalances,the Riemannian metric is proposed to coordinate nominal controllers and the global one.Then,Riemannianbased trajectory length optimization is solved by gradient's dynamic model-heat flow PDE,under which a feasible trajectory satisfying motion constraints is achieved to guide the faulty system.Such virtual control force emerges autonomously through this metric adjustments.Further,the tracking error is rigorously proven to be exponential boundedness.Simulation results confirm the validity of these theoretical findings.展开更多
The paper presents a two-layer,disturbance-resistant,and fault-tolerant affine formation maneuver control scheme that accomplishes the surrounding of a dynamic target with multiple underactuated Quadrotor Unmanned Aer...The paper presents a two-layer,disturbance-resistant,and fault-tolerant affine formation maneuver control scheme that accomplishes the surrounding of a dynamic target with multiple underactuated Quadrotor Unmanned Aerial Vehicles(QUAVs).This scheme mainly consists of predefinedtime estimators and fixed-time tracking controllers,with a hybrid Laplacian matrix describing the communication among these QUAVs.At the first layer,we devise predefined time estimators for leading and following QUAVs,enabling accurate estimation of desired information.In the second layer,we initially devise a fixed-time hybrid observer to estimate unknown disturbances and actuator faults.Fixedtime translational tracking controllers are then proposed,and the intermediary control input from these controllers is used to extract the desired attitude and angular velocities for the fixed-time rotational tracking controllers.We employ an exact tracking differentiator to handle variables that are challenging to differentiate directly.The paper includes a demonstration of the control system stability through mathematical proof,as well as the presentation of simulation results and comparative simulations.展开更多
In this paper, a fault-tolerant-based online critic learning algorithm is developed to solve the optimal tracking control issue for nonaffine nonlinear systems with actuator faults.First, a novel augmented plant is co...In this paper, a fault-tolerant-based online critic learning algorithm is developed to solve the optimal tracking control issue for nonaffine nonlinear systems with actuator faults.First, a novel augmented plant is constructed by fusing the system state and the reference trajectory, which aims to transform the optimal fault-tolerant tracking control design with actuator faults into the optimal regulation problem of the conventional nonlinear error system. Subsequently, in order to ensure the normal execution of the online learning algorithm, a stability criterion condition is created to obtain an initial admissible tracking policy. Then, the constructed model neural network(NN) is pretrained to recognize the system dynamics and calculate trajectory control. The critic and action NNs are constructed to output the approximate cost function and approximate tracking control,respectively. The Hamilton-Jacobi-Bellman equation of the error system is solved online through the action-critic framework. In theoretical analysis, it is proved that all concerned signals are uniformly ultimately bounded according to the Lyapunov principle.The tracking control law can approach the optimal tracking control within a finite approximation error. Finally, two experimental examples are conducted to indicate the effectiveness and superiority of the developed fault-tolerant tracking control scheme.展开更多
Permanent-magnet synchronous machines(PMSMs)are widely used in robotics,rail transportation,and electric vehicles owing to their high power density,high efficiency,and high power factor.However,PMSMs often operate in ...Permanent-magnet synchronous machines(PMSMs)are widely used in robotics,rail transportation,and electric vehicles owing to their high power density,high efficiency,and high power factor.However,PMSMs often operate in harsh environments,where critical components such as windings and permanent magnets(PMs)are susceptible to failures.These faults can lead to a significant degradation in performance,posing substantial challenges to the reliable operation of PMSMs.This paper presents a comprehensive review of common fault types in PMSMs,along with their corresponding fault diagnosis and fault-tolerant control strategies.The underlying mechanisms of typical faults are systematically analyzed,followed by a detailed comparison of various diagnostic and fault-tolerant control methods to evaluate their respective advantages and limitations.Finally,the review concludes by identifying key research gaps in PMSM fault diagnosis and fault-tolerant control,while proposing potential future directions for advancing this field.展开更多
Considering that actual systems are often constrained by multiple factors such as state limitation,actuator saturation and actuator failure at the same time,this paper provides an effective solution for non-affine mul...Considering that actual systems are often constrained by multiple factors such as state limitation,actuator saturation and actuator failure at the same time,this paper provides an effective solution for non-affine multi-player systems,which can guarantee the required performance while saving communication cost.Initially,an auxiliary system is established to accommodate state limitations,following which the controller design is partitioned into two distinct segments,addressing different types of faults.Specifically,the discontinuous and continuous aspects of the controller are achieved by sliding-mode control(SMC)and adaptive critic design(ACD),respectively.During the implementation of ACD to solve the guaranteed value function incorporating the utility function designed for the asymmetric saturation of the control input,two adaptive schemes including adaptive eventtriggered impulsive control(AETIC)and adaptive self-triggered impulsive control(ASTIC)are introduced successively.It is proved that the system maintains exponential stability rather than asymptotic stability and the state signals keep ultimately uniformly bounded(UUB).Finally,the effectiveness of the proposed control sequence is verified by simulation comparisons.展开更多
Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybr...Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybrid control method was proposed.This method included a hybrid controller composed of a slope-based controller and a proportional-integral-derivative(PID)controller.The speed of agricultural machinery was influenced by longitudinal forces,which were divided into two parts:one part was slope-related forces and conventional resistance,and the other was hard-to-estimate forces,such as sliding friction.For the first part,a slope-based controller was designed;for the second part,a PID controller was implemented.By combining these two controllers,the system can dynamically adjust the throttle opening and the brake master cylinder pressure,ensuring steady speed travel on sloping farmland.Simulation tests at a target speed of 7 km/h demonstrated that the proposed controller maintained a stable speed,achieving a root mean square error of 0.13 km/h and a mean absolute percentage error of 1.6%.Field tests on a practical experimental platform validated the method’s effectiveness,with results showing consistent control performance across varying slope conditions.The proposed controller demonstrated superior control performance.Experimental data verified that this method can achieve precise control of the agricultural machinery’s movement speed,meeting the stability requirements for agricultural operations.展开更多
This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relativ...This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relative motion dynamics model,a prescribed time output feedback control strategy is proposed.A prescribed-time extended state observer is designed to estimate the relative velocity and external disturbances.The disturbance estimates are then used as the feedforward component of the controller.Building on this framework,a novel prescribed-time active disturbance rejection control strategy for position tracking is developed via a backstepping control design.The convergence of the extended state observer and the stability of the closed-loop system are rigorously analyzed using Lyapunov stability theory.Numerical simulations are performed to validate the effectiveness of the proposed controller.展开更多
This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper cons...This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper constructs an internal model to learn the information of the states and input of the grid-connected inverter under steady state.Second,by utilizing the internal model principle,the paper turns the tracking control problem into the robust stabilization control problem based on some appropriate coordinate transformations.Then,The paper designs a dynamics state feedback control law to deal with this robust stabilization problem,and thus the solution of the robust current tracking control problem of three-phase grid-connected inverters can be obtained.This control method can ensure the asymptotic stability of the closedloop system.Finally,the paper illustrates the effectiveness of the proposed control approach through several groups of simulations,and compares it with the feedforward control method to verify the robustness of the proposed control method to uncertain parameters.展开更多
Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion...Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.展开更多
Mode shift is a special mechanism for a power-split hybrid electric vehicle(HEV)to realise electrically variable transmission,but the sudden change of equivalent inertia caused by topological configuration recombinati...Mode shift is a special mechanism for a power-split hybrid electric vehicle(HEV)to realise electrically variable transmission,but the sudden change of equivalent inertia caused by topological configuration recombination during mode shift induces a significant torque shock.Therefore,a smooth transient process,among other concerns,typically associated with this category of vehicles,is of great importance.The present research aims to introduce a novel control strategy to manage the dynamic torque of multiple power sources and therefore im-prove ride comfort.To this end,a dynamic model of the objective power-split HEV is first built.To resolve the contention between vehicle jerk and clutch friction loss,a model predictive control(MPC)combined with control allocation(CA)is then designed for the clutch-engaged phase.To reduce the torque fluctuation caused by the inertia torques of multiple power sources,a dynamic compensation control strategy(DCcs)that coordinates motorgenerator torque to compensate for the transition torque is proposed for the brake-disengaged phase.Finally,the proposed control strategy is validated by simulation and bench test,and results show great potential in reducing shift duration,torque variation,vehicle jerk and friction loss(the simulation results show decreases of 22%,39%,83%and 53%,and the experimental results show decreases of 21%,74%,77%,and 59%,re-spectively),thereby improving shift quality.展开更多
基金Supported by National Natural Science Foundation of P. R. China (60274014)Specialized Research Fund for the Doctoral Program of Higher Education (20020487006)Education Ministry's Key Laboratory Foundation for Intelligent Manufacture Technology ( Imstsu-2002-03)
文摘In this paper, we use the matrix measure technique to study stable fault-tolerance control of networked control systems. State feedback networked control systems with the network-induced delay, parameter uncertainties, sensor failures and actuator failures are considered. State feedback gain K is designed for any invariant delay τ, and some theorems and sufficient conditions for stable fault-tolerance control are given. Example is presented to illustrate the effectiveness of these theorems.
基金Supported by National Natural Science Foundation of China(Grant Nos.52025121,52394263)National Key R&D Plan of China(Grant No.2023YFD2000301)+2 种基金Foundation of State Key Laboratory of Automobile Safety and Energy Saving of China(Grant No.KFZ2201)Jiangsu Provincial Scientific Research Center of Applied Mathematics(Grant No.BK20233002)Special Fund of Jiangsu Province for the Transformation of Scientific and Technological Achievements(Grant No.BA2021023).
文摘Realistic faults and failures often occur probabilistically in the lane-keeping system of autonomous electric vehicles,reducing system reliability and posing significant challenges to driving safety.To enhance the system resilience,this paper proposes a novel robust fuzzy fault-tolerant control strategy that incorporates the adaptive event-trigger(AET)mechanism to realize stable,reliable,and precise lane-keeping control in the presence of multiple system uncertainties and probabilistic faults.First,to capture the uncertain and time-varying nature of tire cornering stiffness,an effective Takagi-Sugeno(T-S)fuzzy tire model is developed.Then,by employing the distribution-based probabilistic approach,two sets of unrelated random variables,random sensor and actuator faults in the control system,are modeled.Next,to improve communication efficiency and address ineluctable network-induced delays,an AET control framework with a well-designed triggering condition is established.Subsequently,a robust fuzzy output feedback fault-tolerant lane-keeping controller that satisfies the H∞per-formance is designed by using the Lyapunov-Krasovski functional method.Furthermore,the mean-square ex-ponential stability of the closed-loop system is rigorously guaranteed.Finally,real-time simulations based on Carsim/Simulink co-simulation platform under dynamic driving conditions demonstrate the feasibility and ef-fectiveness of the proposed control strategy.
基金supported in part by the Beijing Natural Science Foundation under Grant 4252050in part by the National Science Fund for Distinguished Young Scholars under Grant 62425304in part by the Basic Science Center Programs of NSFC under Grant 62088101.
文摘This paper investigates the consensus tracking control problem for high order nonlinear multi-agent systems subject to non-affine faults,partial measurable states,uncertain control coefficients,and unknown external disturbances.Under the directed topology conditions,an observer-based finite-time control strategy based on adaptive backstepping and is proposed,in which a neural network-based state observer is employed to approximate the unmeasurable system state variables.To address the complexity explosion problem associated with the backstepping method,a finite-time command filter is incorporated,with error compensation signals designed to mitigate the filter-induced errors.Additionally,the Butterworth low-pass filter is introduced to avoid the algebraic ring problem in the design of the controller.The finite-time stability of the closed-loop system is rigorously analyzed with the finite-time Lyapunov stability criterion,validating that all closed-loop signals of the system remain bounded within a finite time.Finally,the effectiveness of the proposed control strategy is verified through a simulation example.
基金Supported by the National Key R&D Program of China(2021YFB2011300)the National Natural Science Foundation of China(52275044,52205299)+1 种基金the Zhejiang Provincial Natural Science Foundation of China(Z23E050032)the China Postdoctoral Science Foundation(2022M710304).
文摘The operating environment of the diesel engine air path system is complex and may be affected by external random disturbances.Potentially leading to faults.This paper addresses the fault-tolerant control problem of the diesel engine air path system,assuming that the system may simultaneously be affected by actuator faults and external random disturbances,a disturbance observer-based sliding mode controller is designed.Through the linear matrix inequality technique for solving observer and controller gains,optimal gain matrices can be obtained,eliminating the manual adjustment process of controller parameters and reducing the chattering phenomenon of the sliding mode surface.Finally,the effectiveness of the proposed method is verified through simulation analysis.
基金supported by Southern Marine Science and Engineering Guangdong Laboratory Grant No.SML2023SP229。
文摘The cross-domain capabilities of aerial-aquatic vehicles(AAVs)hold significant potential for future airsea integrated combat operations.However,the failure rate of AAVs is higher than that of unmanned systems operating in a single medium.To ensure the reliable and stable completion of tasks by AAVs,this paper proposes a tiltable quadcopter AAV to mitigate the potential issue of rotor failure,which can lead to high-speed spinning or damage during cross-media transitions.Experimental validation demonstrates that this tiltable quadcopter AAV can transform into a dual-rotor or triple-rotor configuration after losing one or two rotors,allowing it to perform cross-domain movements with enhanced stability and maintain task completion.This enhancement significantly improves its fault tolerance and task reliability.
基金supported by Nguyen Tat Thanh University,Ho Chi Minh City,Vietnam,provided with the facilities required to carry out this work.
文摘Hydraulic-electric systems are widely utilized in various applications.However,over time,these systems may encounter random faults such as loose cables,ambient environmental noise,or sensor aging,leading to inaccurate sensor readings.These faults may result in system instability or compromise safety.In this paper,we propose a fault compensation control system to mitigate the effects of sensor faults and ensure system safety.Specifically,we utilize the pressure sensor within the system to implement the control process and evaluate performance based on the piston position.First,we develop a mathematical model to identify optimal parameters for the fault estimation model based on the Lyapunov stability principle.Next,we design an unknown input observer that estimates the state vector and detects pressure sensor faults using a linear matrix inequality optimization algorithm.The estimated pressure faults are incorporated into the fault compensation control system to counteract their effects via a fault residual coefficient.The discrepancy between the feedback state and the estimated state determines this coefficient.We assess the piston position’s performance through pressure control to evaluate the proposed model’s effectiveness.Finally,the system simulation results are analyzed to validate the efficiency of the proposed model.When a pressure sensor fault occurs,the proposed approach effectively minimizes position control errors,enhancing overall system stability.When a pressure sensor fault occurs,the proposed model compensates for the fault to mitigate the impact of pressure problem,thereby enhancing the position control quality of the EHA system.The fault compensation method ensures over 90%system performance,with its effectiveness becoming more evident under pressure sensor faults.
基金supported in part by the National Natural Science Foundation of China under Grants 61991404,62103093 and 62473089the Research Program of the Liaoning Liaohe Laboratory,China under Grant LLL23ZZ-05-01+5 种基金the Key Research and Development Program of Liaoning Province of China under Grant 2023JH26/10200011the 111 Project 2.0 of China under Grant B08015,the National Key Research and Development Program of China under Grant 2022YFB3305905the Xingliao Talent Program of Liaoning Province of China under Grant XLYC2203130the Natural Science Foundation of Liaoning Province of China under Grants 2024JH3/10200012 and 2023-MS-087the Open Research Project of the State Key Laboratory of Industrial Control Technology of China under Grant ICT2024B12the Fundamental Research Funds for the Central Universities of China under Grants N2108003 and N2424004.
文摘The problem of trajectory tracking for a class of differentially driven wheeled mobile robots(WMRs)under partial loss of the effectiveness of the actuated wheels is investigated in this paper.Such actuator faults may cause the loss of strong controllability of the WMR,such that the conventional fault-tolerant control strategies unworkable.In this paper,a new mixed-gain adaption scheme is devised,which is adopted to adapt the gain of a decoupling prescribed performance controller to adaptively compensate for the loss of the effectiveness of the actuators.Different from the existing gain adaption technique which depends on both the barrier functions and their partial derivatives,ours involves only the barrier functions.This yields a lower magnitude of the resulting control signals.Our controller accomplishes trajectory tracking of the WMR with the prescribed rate and accuracy even in the faulty case,and the control design relies on neither the information of the WMR dynamics and the actuator faults nor the tools for function approximation,parameter identification,and fault detection or estimation.The comparative simulation results justify the theoretical findings.
文摘Three-phase grid-connected inverters(GCIs)are essential components in distributed generation systems,where the accuracy of current measurement circuits is fundamental for reliable closed-loop operation.Nevertheless,the presence of a DC offset in the measured current can disrupt the regulation of grid currents and significantly degrade system performance.In this work,a fault-tolerant control approach is introduced to counteract the impact of such offset faults through a dedicated current compensation mechanism.The proposed solution is built around two main stages:(i)detecting and isolating DC offset faults that may appear in one or multiple phases of the measured grid currents,and(ii)estimating the fault magnitude and reconstructing the corrected current signal.The offset magnitude is obtained analytically by examining the grid current projected onto the synchronous d-axis at the grid angular frequency,eliminating the need for any additional sensing hardware.Simulation and experimental investigations conducted under several fault scenarios confirm the robustness of the proposed strategy and highlight significant improvements in detection speed and diagnostic accuracy.
基金supported in part by the National Natural Science Foundation of China(62033008,62188101,62173343,62073339)the Natural Science Foundation of Shandong Province of China(ZR2024MF072,ZR2022ZD34)the Research Fund for the Taishan Scholar Project of Shandong Province of China.
文摘This article presents an adaptive fault-tolerant tracking control strategy for unknown affine nonlinear systems subject to actuator faults and external disturbances.To address the hyperparameter initialization challenges inherent in conventional neural network training,an improved self-organizing radial basis function neural network(SRBFNN)with an input-dependent variable structure is developed.Furthermore,a novel selforganizing RBFNN-based observer is introduced to estimate system states across all dimensions.Leveraging the reconstructed states,the proposed adaptive controller effectively compensates for all uncertainties,including estimation errors in the observer,ensuring accurate state tracking with reduced control effort.The uniform ultimate boundedness of all closed-loop signals and tracking errors is rigorously established via Lyapunov stability analysis.Finally,simulations on two different nonlinear systems comprehensively validate the effectiveness and superiority of the proposed control approach.
基金Supported by National Natural Science Foundation of China(Grant No.52205045)National Key Research and Development Program of China(Grant No.2021YFB2011300)+2 种基金Aeronautical Science Foundation of China(Grant No.2022Z029051001)Zhejiang Provincial Natural Science Foundation of China(Grant No.LZ24E050006)Research Fund of State Key Laboratory of Mechanics and Control for Aerospace Structures(Nanjing University of Aeronautics and Astronautics)(Grant No.MCAS-E-0224G01).
文摘The aircraft braking system is critical to ensure the safe take-off and landing of the aircraft.However,the braking system is often exposed to high temperatures and strong vibration working environments,which makes the sensor prone to failure.Sensor failure has the potential to compromise aircraft safety.In order to improve the safety of the aircraft braking system,a fault detection and fault-tolerant control(FDFTC)strategy for the aircraft brake pressure sensor is designed.Firstly,a model based on a bidirectional long short-term memory(Bi-LSTM)network is constructed to estimate the brake pressure.Then,the residual sequence is obtained by comparing the measured pressure with the estimated pressure.On this basis,the improved sequential probability ratio test(SPRT)method based on mathematical statistics is applied to analyze the residual sequence to detect the fault.Finally,simulation and hardware-in-the-loop(HIL)testing results indicate that the proposed FDFTC strategy can detect sensor faults in time and efficiently complete braking when faults occur.Hence,the proposed FDFTC strategy can effectively deal with the faults of the aircraft brake pressure sensor,which is of great significance to improve the reliability and safety of the aircraft.
基金supported in part by the National Natural Science Foundation of China under Grant 62303144,62020106003,U22A2044in part by the Zhejiang Provincial Natural Science Foundation of China under Grant LQ23F030013.
文摘This paper investigates the issue of fault-tolerant control for swarm systems subject to switched graphs,actuator faults and obstacles.A geometric-based partial differential equation(PDE)framework is proposed to unify collision-free trajectory generation and fault-tolerant control.To deal with the fault-induced force imbalances,the Riemannian metric is proposed to coordinate nominal controllers and the global one.Then,Riemannianbased trajectory length optimization is solved by gradient's dynamic model-heat flow PDE,under which a feasible trajectory satisfying motion constraints is achieved to guide the faulty system.Such virtual control force emerges autonomously through this metric adjustments.Further,the tracking error is rigorously proven to be exponential boundedness.Simulation results confirm the validity of these theoretical findings.
基金supported by Natural Science Basic Research Plan in Shaanxi Province of China(No.2023-JC-QN-0733)Guangdong Basic and Applied Basic Research Foundation,China(No.2022A1515110753)+2 种基金China Postdoctoral Science Foundation(No.2022M722583)China Industry-UniversityResearch Innovation Foundation(No.2022IT188)National Key Laboratory of Air-based Information Perception and Fusion and the Aeronautic Science Foundation of China(No.20220001068001)。
文摘The paper presents a two-layer,disturbance-resistant,and fault-tolerant affine formation maneuver control scheme that accomplishes the surrounding of a dynamic target with multiple underactuated Quadrotor Unmanned Aerial Vehicles(QUAVs).This scheme mainly consists of predefinedtime estimators and fixed-time tracking controllers,with a hybrid Laplacian matrix describing the communication among these QUAVs.At the first layer,we devise predefined time estimators for leading and following QUAVs,enabling accurate estimation of desired information.In the second layer,we initially devise a fixed-time hybrid observer to estimate unknown disturbances and actuator faults.Fixedtime translational tracking controllers are then proposed,and the intermediary control input from these controllers is used to extract the desired attitude and angular velocities for the fixed-time rotational tracking controllers.We employ an exact tracking differentiator to handle variables that are challenging to differentiate directly.The paper includes a demonstration of the control system stability through mathematical proof,as well as the presentation of simulation results and comparative simulations.
基金supported in part by the National Natural Science Foundation of China(62222301,62373012,62473012,62021003)the National Science and Technology Major Project(2021ZD0112302,2021ZD0112301)the Beijing Natural Science Foundation(JQ19013)
文摘In this paper, a fault-tolerant-based online critic learning algorithm is developed to solve the optimal tracking control issue for nonaffine nonlinear systems with actuator faults.First, a novel augmented plant is constructed by fusing the system state and the reference trajectory, which aims to transform the optimal fault-tolerant tracking control design with actuator faults into the optimal regulation problem of the conventional nonlinear error system. Subsequently, in order to ensure the normal execution of the online learning algorithm, a stability criterion condition is created to obtain an initial admissible tracking policy. Then, the constructed model neural network(NN) is pretrained to recognize the system dynamics and calculate trajectory control. The critic and action NNs are constructed to output the approximate cost function and approximate tracking control,respectively. The Hamilton-Jacobi-Bellman equation of the error system is solved online through the action-critic framework. In theoretical analysis, it is proved that all concerned signals are uniformly ultimately bounded according to the Lyapunov principle.The tracking control law can approach the optimal tracking control within a finite approximation error. Finally, two experimental examples are conducted to indicate the effectiveness and superiority of the developed fault-tolerant tracking control scheme.
基金supported by National Natural Science Foundation of China under Project 52437003 and 52421004in part by the National Key R&D Program of China under Project 2023YFB3406000in part by Heilongjiang Provincial Natural Science Foundation under Project YQ2022E029.
文摘Permanent-magnet synchronous machines(PMSMs)are widely used in robotics,rail transportation,and electric vehicles owing to their high power density,high efficiency,and high power factor.However,PMSMs often operate in harsh environments,where critical components such as windings and permanent magnets(PMs)are susceptible to failures.These faults can lead to a significant degradation in performance,posing substantial challenges to the reliable operation of PMSMs.This paper presents a comprehensive review of common fault types in PMSMs,along with their corresponding fault diagnosis and fault-tolerant control strategies.The underlying mechanisms of typical faults are systematically analyzed,followed by a detailed comparison of various diagnostic and fault-tolerant control methods to evaluate their respective advantages and limitations.Finally,the review concludes by identifying key research gaps in PMSM fault diagnosis and fault-tolerant control,while proposing potential future directions for advancing this field.
基金supported in part by the National Natural Science Foundation of China(62273036,62403045)the Open Research Fund of the State Key Laboratory of Multimodal Artificial Intelligence Systems(MAIS2025020)Interdisciplinary Research Project for Young Teachers of USTB(Fundamental Research Funds for the Central Universities)(FRF-IDRY-23-036).
文摘Considering that actual systems are often constrained by multiple factors such as state limitation,actuator saturation and actuator failure at the same time,this paper provides an effective solution for non-affine multi-player systems,which can guarantee the required performance while saving communication cost.Initially,an auxiliary system is established to accommodate state limitations,following which the controller design is partitioned into two distinct segments,addressing different types of faults.Specifically,the discontinuous and continuous aspects of the controller are achieved by sliding-mode control(SMC)and adaptive critic design(ACD),respectively.During the implementation of ACD to solve the guaranteed value function incorporating the utility function designed for the asymmetric saturation of the control input,two adaptive schemes including adaptive eventtriggered impulsive control(AETIC)and adaptive self-triggered impulsive control(ASTIC)are introduced successively.It is proved that the system maintains exponential stability rather than asymptotic stability and the state signals keep ultimately uniformly bounded(UUB).Finally,the effectiveness of the proposed control sequence is verified by simulation comparisons.
文摘Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybrid control method was proposed.This method included a hybrid controller composed of a slope-based controller and a proportional-integral-derivative(PID)controller.The speed of agricultural machinery was influenced by longitudinal forces,which were divided into two parts:one part was slope-related forces and conventional resistance,and the other was hard-to-estimate forces,such as sliding friction.For the first part,a slope-based controller was designed;for the second part,a PID controller was implemented.By combining these two controllers,the system can dynamically adjust the throttle opening and the brake master cylinder pressure,ensuring steady speed travel on sloping farmland.Simulation tests at a target speed of 7 km/h demonstrated that the proposed controller maintained a stable speed,achieving a root mean square error of 0.13 km/h and a mean absolute percentage error of 1.6%.Field tests on a practical experimental platform validated the method’s effectiveness,with results showing consistent control performance across varying slope conditions.The proposed controller demonstrated superior control performance.Experimental data verified that this method can achieve precise control of the agricultural machinery’s movement speed,meeting the stability requirements for agricultural operations.
文摘This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relative motion dynamics model,a prescribed time output feedback control strategy is proposed.A prescribed-time extended state observer is designed to estimate the relative velocity and external disturbances.The disturbance estimates are then used as the feedforward component of the controller.Building on this framework,a novel prescribed-time active disturbance rejection control strategy for position tracking is developed via a backstepping control design.The convergence of the extended state observer and the stability of the closed-loop system are rigorously analyzed using Lyapunov stability theory.Numerical simulations are performed to validate the effectiveness of the proposed controller.
基金Supported by the Fundamental Research Funds for the Central Universities(2024ZYGXZR047)the National Natural Science Foundation of China(62373156)the Guangdong Basic and Applied Basic Research Foundation(2024A1515011736)。
文摘This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper constructs an internal model to learn the information of the states and input of the grid-connected inverter under steady state.Second,by utilizing the internal model principle,the paper turns the tracking control problem into the robust stabilization control problem based on some appropriate coordinate transformations.Then,The paper designs a dynamics state feedback control law to deal with this robust stabilization problem,and thus the solution of the robust current tracking control problem of three-phase grid-connected inverters can be obtained.This control method can ensure the asymptotic stability of the closedloop system.Finally,the paper illustrates the effectiveness of the proposed control approach through several groups of simulations,and compares it with the feedforward control method to verify the robustness of the proposed control method to uncertain parameters.
文摘Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.
基金Supported by National Natural Science Foundation of China(Grant Nos.52005039,51575043,51975048,U1764257).
文摘Mode shift is a special mechanism for a power-split hybrid electric vehicle(HEV)to realise electrically variable transmission,but the sudden change of equivalent inertia caused by topological configuration recombination during mode shift induces a significant torque shock.Therefore,a smooth transient process,among other concerns,typically associated with this category of vehicles,is of great importance.The present research aims to introduce a novel control strategy to manage the dynamic torque of multiple power sources and therefore im-prove ride comfort.To this end,a dynamic model of the objective power-split HEV is first built.To resolve the contention between vehicle jerk and clutch friction loss,a model predictive control(MPC)combined with control allocation(CA)is then designed for the clutch-engaged phase.To reduce the torque fluctuation caused by the inertia torques of multiple power sources,a dynamic compensation control strategy(DCcs)that coordinates motorgenerator torque to compensate for the transition torque is proposed for the brake-disengaged phase.Finally,the proposed control strategy is validated by simulation and bench test,and results show great potential in reducing shift duration,torque variation,vehicle jerk and friction loss(the simulation results show decreases of 22%,39%,83%and 53%,and the experimental results show decreases of 21%,74%,77%,and 59%,re-spectively),thereby improving shift quality.
