A novel horizontal trap-door test system was devised in this study to analyze the face stability of shield tunnels in sands.The test system can be used to investigate both the longitudinal and cross sections of the fa...A novel horizontal trap-door test system was devised in this study to analyze the face stability of shield tunnels in sands.The test system can be used to investigate both the longitudinal and cross sections of the face failure simultaneously at one single apparatus and was employed to perform face stability tests on small-scaled tunnel models at single gravity.The lateral support pressures and failure zones were studied with varying sand materials and earth covers.The results demonstrate that the tunnel face moves back,the lateral active earth pressure on the tunnel face decreases rapidly to a residual value,and the lateral pressure distribution can be categorized into three stages during the failure process:1)initial state;2)pressure dissipation stage;and 3)pressure zone diminution stage.Furthermore,face failure firstly develops from a stable condition to the local failure state,and then continues to develop to the global failure state that can be divided into two sub-zones with different failure mechanisms:rotational failure zone(lower zone)and gravitational failure zone(upper zone).Further discussion shows that under the effects of soil arching,the shape of the gravitational failure zone can adopt arch shaped(most frequent)and column shaped(in shallow tunnels).Limit support pressure for face stability usually appears atδ/D=0.2%−0.5%(ratio of face displacement to tunnel diameter).展开更多
Four different types of three-body model composed of rock and coal with different strength and stiffness were established in order to study the failure characteristics of compound model such as roof-coal-floor. Throug...Four different types of three-body model composed of rock and coal with different strength and stiffness were established in order to study the failure characteristics of compound model such as roof-coal-floor. Through stress analysis of the element with variable strength and stiffness extracted from the strong-weak interface, the tri-axial compressive strength of the weak body and strong body near the interface as well as the areas away from the contact surface was found. Then, on the basis of three-dimensional fast Lagrangian method of continua and strain softening constitutive model composed of Coulomb-Mohr shear failure with tensile cut-off, stress and strain relationship of the four three-body combined models were analyzed under different confining pressures by numerical simulation. Finally, the different features of local shear zones and plastic failure areas of the four different models and their development trend with increasing confining pressure were discussed. The results show that additional stresses are derived due to the lateral deformation constraints near the strong-weak interface area, which results in the strength increasing in weak body and strength decreasing in strong body. The weakly consolidated soft rock and coal cementation exhibit significant strain softening behavior and bear compound tension-shear failure under uni-axial compression. With the increase of confining pressure, the tensile failure disappears from the model, and the failure type of composed model changes to local shear failure with different number of shearing bands and plastic failure zones. This work shows important guiding significance for the mechanism study of seismic, rock burst, and coal bump.展开更多
基金Project(51678037)supported by the National Natural Science Foundation of ChinaProject(2015CB057802)supported by the National Basic Research Program of ChinaProject(BLX2015-20)supported by the Fundamental Research Funds for the Central Universities,China。
文摘A novel horizontal trap-door test system was devised in this study to analyze the face stability of shield tunnels in sands.The test system can be used to investigate both the longitudinal and cross sections of the face failure simultaneously at one single apparatus and was employed to perform face stability tests on small-scaled tunnel models at single gravity.The lateral support pressures and failure zones were studied with varying sand materials and earth covers.The results demonstrate that the tunnel face moves back,the lateral active earth pressure on the tunnel face decreases rapidly to a residual value,and the lateral pressure distribution can be categorized into three stages during the failure process:1)initial state;2)pressure dissipation stage;and 3)pressure zone diminution stage.Furthermore,face failure firstly develops from a stable condition to the local failure state,and then continues to develop to the global failure state that can be divided into two sub-zones with different failure mechanisms:rotational failure zone(lower zone)and gravitational failure zone(upper zone).Further discussion shows that under the effects of soil arching,the shape of the gravitational failure zone can adopt arch shaped(most frequent)and column shaped(in shallow tunnels).Limit support pressure for face stability usually appears atδ/D=0.2%−0.5%(ratio of face displacement to tunnel diameter).
基金Project(51174128)supported by the National Natural Science Foundation of ChinaProject(20123718110007)supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘Four different types of three-body model composed of rock and coal with different strength and stiffness were established in order to study the failure characteristics of compound model such as roof-coal-floor. Through stress analysis of the element with variable strength and stiffness extracted from the strong-weak interface, the tri-axial compressive strength of the weak body and strong body near the interface as well as the areas away from the contact surface was found. Then, on the basis of three-dimensional fast Lagrangian method of continua and strain softening constitutive model composed of Coulomb-Mohr shear failure with tensile cut-off, stress and strain relationship of the four three-body combined models were analyzed under different confining pressures by numerical simulation. Finally, the different features of local shear zones and plastic failure areas of the four different models and their development trend with increasing confining pressure were discussed. The results show that additional stresses are derived due to the lateral deformation constraints near the strong-weak interface area, which results in the strength increasing in weak body and strength decreasing in strong body. The weakly consolidated soft rock and coal cementation exhibit significant strain softening behavior and bear compound tension-shear failure under uni-axial compression. With the increase of confining pressure, the tensile failure disappears from the model, and the failure type of composed model changes to local shear failure with different number of shearing bands and plastic failure zones. This work shows important guiding significance for the mechanism study of seismic, rock burst, and coal bump.
