A new statistical method, the fuzzy analytical method, was introduced in the optimization processes of liposome preparation. It took the full advantage of the information from orthogonal experiments to obtain the opti...A new statistical method, the fuzzy analytical method, was introduced in the optimization processes of liposome preparation. It took the full advantage of the information from orthogonal experiments to obtain the optimal liposome preparation conditions by considering all the evaluation indexes. Liposomes were made by the modified reverse-phase evaporation method and the properties of liposomes including size, encapsulation efficiency and physical stability were selected as the evaluation indexes to indicate the quality of liposomes. The experimental data of these properties were analyzed by three different methods including direct observation, variance analysis and fuzzy analytical method. The optimal preparation conditions obtained from these methods were validated with further experiments. The results of all possible combinations of levels for all factors in orthogonal experiments were acquired by the fuzzy analytical method. All evaluation indexes were taken into account and the optimal preparation condition was obtained. The optimal preparation conditions from direct observation and fuzzy analytical method were different and further validation studies indicated that the optimal conditions obtained from the fuzzy analytical method were in agreement with that from traditional statistical analysis. Fuzzy analytical method avoided the problem resulted from the traditional method, in which different levels of the same factor were obtained when considering different evaluation indexes. More information could be obtained from the fuzzy analytical method and the blind area within the experimental range was eliminated. As a result, fuzzy analytical method can be applied in the optimization processes of liposome preparation.展开更多
In this paper,the mission and the thermal environment of the Solar Close Observations and Proximity Experiments(SCOPE)spacecraft are analyzed,and an advanced thermal management system(ATMS)is designed for it.The relat...In this paper,the mission and the thermal environment of the Solar Close Observations and Proximity Experiments(SCOPE)spacecraft are analyzed,and an advanced thermal management system(ATMS)is designed for it.The relationship and functions of the integrated database,the intelligent thermal control system and the efficient liquid cooling system in the ATMS are elaborated upon.For the complex thermal field regulation system and extreme space thermal environment,a modular simulation and thermal field planning method are proposed,and the feasibility of the planning algorithm is verified by numerical simulation.A solar array liquid cooling system is developed,and the system simulation results indicate that the temperatures of the solar arrays meet the requirements as the spacecraft flies by perihelion and aphelion.The advanced thermal management study supports the development of the SCOPE program and provides a reference for the thermal management in other deep-space exploration programs.展开更多
In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment metho...In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment method. Dynamic analysis of a milling machine, which is newly designed for producing turbine blades, has been conducted by utilizing the modal synthesis method. The finite element model is verified and updated by experimental modal analysis （EMA） of the machine tool. The result gained by modal synthesis method is compared with whole-model finite element method （FEM） result as well. According to the orthogonal experiment method, four configuration parameters of machine tool are considered as four factors for dynamic characteristics. The influence of configuration parameters on the first three natural frequencies is obtained by range analysis. It is pointed out that configuration parameter is the most important factor affecting the fundamental frequency of machine tools, and configuration parameter has less effect on lower-order modes of the system than others. The combination of configuration parameters which makes the fundamental frequency reach the maximum value is provided. Through demonstration, the conclusion can be drawn that the influence of configuration parameters on the natural frequencies of machine tools can be analyzed explicitly by the orthogonal experiment method, which offers a new method for estimating the dynamic characteristics of machine tools.展开更多
This paper studies the excavation collapse at the Xianghu subway station on Hangzhou metro line 1.The objective is to present an overview of this case study and discuss the cause of the failure.Through field investiga...This paper studies the excavation collapse at the Xianghu subway station on Hangzhou metro line 1.The objective is to present an overview of this case study and discuss the cause of the failure.Through field investigation and preliminary analysis,the reasons for the excavation collapse were the misuse of the soil parameters,over excavation,incorrect installation of steel struts,invalid monitoring data,and inadequate ground improvement.Finally,a small strain constitutive model was used for further analysis.In order to estimate damage efficiently,the orthogonal array(OA) was introduced for screening the key factor in the numerical experiments.Six estimated indexes including deformations and internal forces of the excavation were taken,and the effectiveness of four factors which may cause the collapse was evaluated.Through numerical experiments and interaction analysis,it is found that the deformation and internal force can be well controlled by jet grouting of the subsoil under the final cutting surface,but increasing the improvement ratio of the jet grouting cannot help optimize the excavation behavior efficiently,and without jet grouting and the fourth level struts,the deformation and internal force of the excavation in this case will far surpass the allowable value.展开更多
In order to obtain the surge margin of an aero-engine during its operation,an engine surge experiment is required.A multi-dimensional simulation method for an aero-engine is established in this paper.The simulation of...In order to obtain the surge margin of an aero-engine during its operation,an engine surge experiment is required.A multi-dimensional simulation method for an aero-engine is established in this paper.The simulation of a surge experiment using high-pressure air-injection is then carried out on a turbo-shaft engine to obtain the surge boundary using this method.More specifically,firstly,a body-force model is employed to calculate the compressor performance owing to its capability of capturing the main three-dimensional features of compressor surge and avoiding excessive simulation time required by the traditional fully-three-dimensional Reynolds Averaged Navier-Stokes(RANS)method.Then,a one-dimensional model combining a lumped-parameter plenum model is used for the combustor to account for the propagation of pressure waves and the heat-release process,and a zero-dimensional throttle model is used to mimic the choking effect at the turbine nozzle.Finally,the air-injection system is modeled by imposing an injection boundary condition,which can be used conveniently in changing injection parameters.Based on the established method,the influences of different test parameters,such as the air-injection location,the pressure,the orifice size,the number of injection orifices,and the injection time duration on the surge characteristics and boundary are further studied,which offer effective guidance to optimize an actual experimental design.展开更多
Efficiency of calculating a dynamic response is an important point of the compliant mechanism for posture adjustment.Dynamic modeling with low orders of a 2R1T compliant parallel mechanism is studied in the paper.The ...Efficiency of calculating a dynamic response is an important point of the compliant mechanism for posture adjustment.Dynamic modeling with low orders of a 2R1T compliant parallel mechanism is studied in the paper.The mechanism with two out-of-plane rotational and one lifting degrees of freedom(DoFs)plays an important role in posture adjustment.Based on elastic beam theory,the stiffness matrix and mass matrix of the beam element are established where the moment of inertia is considered.To improve solving efficiency,a dynamic model with low orders of the mechanism is established based on a modified modal synthesis method.Firstly,each branch of the RPR type mechanism is divided into a substructure.Subsequently,a set of hypothetical modes of each substructure is obtained based on the C-B method.Finally,dynamic equation of the whole mechanism is established by the substructure assembly.A dynamic experiment is conducted to verify the dynamic characteristics of the compliant mechanism.展开更多
Maize regional experiment is a an intermediate link for overall assessment and comprehensive evaluation on yielding ability, stable yield, stress, adaptability, and quality traits of new maize varieties in different e...Maize regional experiment is a an intermediate link for overall assessment and comprehensive evaluation on yielding ability, stable yield, stress, adaptability, and quality traits of new maize varieties in different ecological conditions. It is an essential process for determining whether the new maize varieties can pass the ex- amination and approval for extension. Besides, regional experiment is an important link connecting agricultural scientific researches and agricultural production. In addi- tion, it is a scientific basis for extension and application of new maize varieties in a region. Therefore, the maize regional experiment is of the utmost importance.展开更多
We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing f...We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing fast Fourier transform,inverse fast Fourier transform and the nonlinear leastsquare fitting on the diffraction pattern taken by a camera,the DIP method can quickly return an analytic expression,whose period is used to calculate widths of single slits.By comparing the measured results by the DIP method and the successional difference(SD)method,we find that for a single slit whose width is 60372μm,the DIP method is more accurate.Experimental results show that for single slits with widths between 40μm and 160μm,the relative error of the DIP method is less than 2.78%.Also,the DIP method can be used to measure the diameter of filament and fibres online in real time.展开更多
Carbon nanotubes (CNTs) have potential applications in many fields, chemical vapor deposition (CVD) is an effective method for CNTs preparation. By CVD, the catalytic pyrolysis temperature, pyrolysis time and the size...Carbon nanotubes (CNTs) have potential applications in many fields, chemical vapor deposition (CVD) is an effective method for CNTs preparation. By CVD, the catalytic pyrolysis temperature, pyrolysis time and the size of the raw gas flow have a great influence on yield rate of CNTs and their form. In this paper, the orthogonal experiment analysis method is used for studying the influence factors of yield rate of CNTs. Research results show that, in the suitable temperature range of preparing CNTs, there is relatively more CNTs with excellent morphology, otherwise, if the temperature is too low, the growth of CNTs will not be sufficient; if the temperature is too high, then CNTs will be generated with excessive defects; with longer growth time of suitable pyrolysis of CNTs, higher yield of CNTs will be obtained; CNTs morphology with reaction time is not proportional; too low or too high raw gas flow rate is not conducive to the growth of CNTs. We have found the optimum conditions for the CNTs preparation: pyrolysis temperature 68 degrees C, pyrolysis time 35 min, propylene flow rate of 180 mL/min. The results have a reference value for the preparation of CNTS and their composites.展开更多
Despite a multitude of theoretical discussions on China's mixed ownership reform, very few studies have addressed realistic questions concerning the implementation of the reform. The Resolutions of the Third Plenu...Despite a multitude of theoretical discussions on China's mixed ownership reform, very few studies have addressed realistic questions concerning the implementation of the reform. The Resolutions of the Third Plenum of the 18 th CPC Central Committee and other reform strategies have outlined the reform of sectors with natural monopoly, including urban public utility sectors. The question is how mixed ownership reform should be carried out in sectors of natural monopoly, or which public utilities sectors should enjoy priority of mixed ownership reform. To answer this question, this paper employs data of large public utility enterprises in China from 1998 to 2008, and estimates the natural monopoly attribute at the industry level and corporate total factor productivity(TFP) using cost function analysis method excluding the impact of product price factor. Based on the difference-indifferences-in-differences(DDD) method of natural experiment, an empirical test is carried out for the relationship among natural monopoly, mixed ownership reform and corporate productivity. Our results suggest that:(1) Statistically, mixed ownership reform cannot significantly increase corporate TFP in sectors with natural monopoly;(2) mixed ownership reform should not be carried out indiscriminately on a nationwide basis and for all public utilities sectors. Such an attempt of reform without distinguishing natural monopoly and the level of competitiveness is fraught with policy uncertainties;(3) relative to sectors with natural monopoly, corporate productivity in competitive sectors after mixed ownership reform will improve more significantly and enjoy greater "policy dividends" of institutional reform. Therefore, mixed ownership reform should be carried out first in competitive sectors.展开更多
DOE （design of experiments） is a systematic, rigorous approach to engineering problem-solving that applies principles and techniques at the data collection stage so as to ensure the generation of valid, defensible, ...DOE （design of experiments） is a systematic, rigorous approach to engineering problem-solving that applies principles and techniques at the data collection stage so as to ensure the generation of valid, defensible, and supportable engineering conclusions. This paper presents a comparison of three different experimental designs （full experimental design, fractional design and Taguchi design） aimed at studying the effects of cutting parameters variations on surface finish. The results revealed that the effects obtained by analyzing both fractional and Taguchi designs were comparable to the main effects and two-level interactions obtained by the full factorial design. Thus, we conclude that full factorial design appear to be reliable and more economical since they permit to reduce by a factor the amount of time and effort required to conduct the experimental design without losing valuable information. Thus, we conclude that full factorial design appear to be reliable and more economical and without losing valuable information.展开更多
In a teaching experiment, Japanese Grade 9 students investigated how to measure the height of an aerial balloon using different models involving angles and distances, and also to evaluate the models they developed. As...In a teaching experiment, Japanese Grade 9 students investigated how to measure the height of an aerial balloon using different models involving angles and distances, and also to evaluate the models they developed. As novices to mathematical modelling, they needed to decide which of several possible models were both valid and practicable, and the errors in measurement that are likely to arise. Opportunities to construct and use paper models, as scale reductions of the real situation, and discussing their results in small groups were effective in moving forward the thinking of many students on the dimensions mentioned above. While students were less able to identify different sources of errors, many came to appreciate the need to learn trigonometric techniques that are more suitable in dealing with problems of this kind.展开更多
Based on the outpatient interview and literature review, the initial framework of the outpatient experience of human caring scale was formed with 9 dimensions of outpatient process. The research aim was to improve the...Based on the outpatient interview and literature review, the initial framework of the outpatient experience of human caring scale was formed with 9 dimensions of outpatient process. The research aim was to improve the scale by Delphi method. Sixteen experts in medical management, human caring or medical education were invited to evaluate the importance of the dimensions and items of the scale and provided some expertise via filling out the DeLphi consultation questionnaires twice in the consulting round. In the first round, the recovery rate showing the experts＇ positivity was 80%; the coefficient of reliability （Cr） ascertaining the authority of the evaluation was 0.92; the mean and full mark ratios responding the concentration of the evaluation were 2.88-4.94 and 6.25%-93.75% respectively; the coefficients of variation （CV） and the Kendall＇s W determining the concordance of the evaluation were 5.06%-52.15% and 0.21-0.24 respectively. In the second round, the recovery rate was 93.75%; the Cr was 0.93; the mean was 3.93-4.93; the full mark ratios were 26.67%-93.33%; the Kendall＇s W was 0.14- 0.31, the CV was 5.25%-23.61%. Via the two-round Delphi study, the scale that included 10 dimensions and 61 items has been improved. Ten dimensions are pre-hospital medical service, guidance, registration, waiting, diagnosis ＆ treatment, paying, inspection ＆ assay, medicine receiving, therapy/injection/transfusion and global evaluation. It was concluded that Chinese scholars have paid high attention to human caring and outpatient experience. The experts have given high agreements about the dimensions which were established with Chinese outpatient process. The dimensions are different from the similar researches about outpatient experience study. In the future, it is necessary to survey the outpatients to test the construct validity, internal consistency reliability and others of the scale to improve the scale.展开更多
Three experiments are carried out for earthquake monitoring using electromagnetic （EM） methods in recent years. Some earthquakes occurred in chance of the measurement time period for each experiment and the anomalie...Three experiments are carried out for earthquake monitoring using electromagnetic （EM） methods in recent years. Some earthquakes occurred in chance of the measurement time period for each experiment and the anomalies were recorded before the shocks. The observation at a site 20 km away from the epicenter of Zhangbei Ms6.2 earthquake in 1998 shows that the apparent resistivity decreases in the strike direction before and/or during the earthquake and the resistivity increases in the decline direction. This anomalous variation in apparent resistivity accounts for about 20%. The apparent resistivities at a site in the epicentral area decrease in the strike and decline directions before and/or during the earthquake and increase after shocks. The experiments using artificial electromagnetic signals with super low frequency carried out in 1999 show that the resolution and stability of electric and magnetic spectra are improved. The spectra of electric and magnetic fields and apparent resistivity at the Baodi station began to anomalously change two days before the Qian＇an earthquake with 120 km distant to the station. The anomalous variation of electric and magnetic spectra is about twice as great as normal variation and the apparent resistivity changes by about 20%. The measurements in active seismic area of Yunnan province in the year 2005 indicate that the electric and magnetic spectra anomalously change by one order before the Taoyuan earthquake about 100 km away from the observatories. But the measurements at the sites in Beijing area 2 000 km away from the epicenter do not show any anomaly.展开更多
A shake-table experiment on pile foundations in liquefi able soils composed of liquefi able sand and overlying soft clay is studied. A three-dimensional(3D) effective stress fi nite element(FE) analysis is employed to...A shake-table experiment on pile foundations in liquefi able soils composed of liquefi able sand and overlying soft clay is studied. A three-dimensional(3D) effective stress fi nite element(FE) analysis is employed to simulate the experiment. A recently developed multi-surface elasto-plastic constitutive model and a fully coupled dynamic inelastic FE formulation(u-p) are used to model the liquefaction behavior of the sand. The soil domains are discretized using a solid-fl uid fully coupled(u-p) 20-8 noded brick element. The pile is simulated using beam-column elements. Upon careful calibration, very good agreement is obtained between the computed and the measured dynamic behavior of the ground and the pile. A parametric analysis is also conducted on the model to investigate the effect of pile-pinning, pile diameter, pile stiffness, ground inclination angle, superstructure mass and pile head restraints on the ground improvement. It is found that the pile foundation has a noticeable pinning effect that reduces the lateral soil displacement. It is observed that a larger pile diameter and fi xed pile head restraints contribute to decreasing the lateral pile deformation; however, a higher ground inclination angle tends to increase the lateral pile head displacements and pile stiffness, and superstructure mass seems to effectively infl uence the lateral pile displacements.展开更多
For rail rolling by universal mill, a simplified three-dimensional theoretical model was built firstly. The kinematically admissible velocity field of the web, head, and base of rail was determined respectively; moreo...For rail rolling by universal mill, a simplified three-dimensional theoretical model was built firstly. The kinematically admissible velocity field of the web, head, and base of rail was determined respectively; moreover, the corresponding strain rate field and the strength of shear strain rate were obtained. Then, the plastic deformation power of corresponding deformation zone, the power consumed on the velocity discontinuity surface, and the power generated by backward slip and forward slip were proposed. According to the upper-bound method, the roiling force of horizontal roll and two vertical rolls could be obtained. For verifying the theoretical model, the universal rolling experiments of 18 kg/m light rail was accomplished in Yanshan University Rolling Laboratory, and the experimental data of 60 kg/m heavy rail universal rolling were obtained from the Anshan Iron and Steel Group Corporation. Compared with the experimental data, the theoretical results of rolling force for 18 kg/m light rail and 60 kg/m heavy rail universal rolling were somewhat greater than experimental data, but in general did not exceed them by 15%. Thus, the simplified model was reliable and feasible for presetting and optimizing the parameters of rolling technology according to the upper-bound method.展开更多
A relatively independent and small-scale heavy rainfall event occurred to the south of a slow eastwardmoving meso-α-scale vortex. The analysis shows that a meso-β-scale system is heavily responsible for the intense ...A relatively independent and small-scale heavy rainfall event occurred to the south of a slow eastwardmoving meso-α-scale vortex. The analysis shows that a meso-β-scale system is heavily responsible for the intense precipitation. An attempt to simulate it met with some failures. In view of its small scale, short lifetime and relatively sparse observations at the initial time, an adjoint model was used to examine the sensitivity of the meso-β-scale vortex simulation with respect to initial conditions. The adjoint sensitivity indicates how small perturbations of initial model variables anywhere in the model domain can influence the central vorticity of the vortex. The largest sensitivity for both the wind and temperature perturbation is located below 700 hPa, especially at the low level. The largest sensitivity for the water vapor perturbation is located below 500 hPa, especially at the middle and low levels. The horizontal adjoint sensitivity for all variables is mainly located toward the upper reaches of the Yangtze River with respect to the simulated meso-β-scale system in Hunan and Jiangxi provinces with strong locality. The sensitivity shows that warm cyclonic perturbations in the upper reaches can have a great effect on the development of the meso-β-scale vortex. Based on adjoint sensitivity, forward sensitivity experiments were conducted to identify factors influencing the development of the meso-β-scale vortex and to explore ways of improving the prediction. A realistic prediction was achieved by using adjoint sensitivity to modify the initial conditions and implanting a warm cyclone at the initial time in the upper reaches of the river with respect to the meso-β-scale vortex, as is commonly done in tropical cyclone prediction.展开更多
In this paper, two novel numerical computation methods are introduced which have been recently developed at Research Institute for Applied Mechanics （ R/AM ）, Kyushu University, for strongly nonlinear wave-body inte...In this paper, two novel numerical computation methods are introduced which have been recently developed at Research Institute for Applied Mechanics （ R/AM ）, Kyushu University, for strongly nonlinear wave-body interaction problems, such as ship motions in rough seas and resulting green-water impact on deck. The first method is the CIP-based Cartesian grid method, in which the free surface flow is treated as a multi-phase flow which is solved using a Cartesian grid. The second method is the MPS method, which is a so-called particle method and hence no grid is used. The features and calculation procedures of these numerical methods are described. One validation computation against a newly conducted experiment on a dam break problem, which is also described in this paper, is presented.展开更多
Natural laminar flow technology can significantly reduce aircraft aerodynamic drag and has excellent technical appeal for transport aircraft development with high aerodynamic efficiency.Accurately and efficiently pred...Natural laminar flow technology can significantly reduce aircraft aerodynamic drag and has excellent technical appeal for transport aircraft development with high aerodynamic efficiency.Accurately and efficiently predicting the laminar-to-turbulent transition and revealing the maintenance mechanism of laminar flow in a transport aircraft’s flight environment are significant for developing natural laminar flow wings.In this research,we carry out natural laminar flow flight experiments with different Reynolds numbers and angles of attack.The critical N-factor is calibrated as 9.0 using flight experimental data and linear stability theory from a statistical perspective,which makes sure that the relative error of transition location is within 5%.We then implement a simplified e^(N) transition prediction method with a similar accuracy compared with linear stability theory.We compute the sensitivity information for the simplified eN method with an adjointbased method,using the automatic differentiation technique(ADjoint).The impact of Reynolds numbers and pressure distributions on TS waves is analyzed using the sensitivity information.Through the sensitivity analysis,we find that:favorable pressure gradients not only suppress the development of TS waves but also decrease their sensitivity to Reynolds numbers;there exist three special regions which are very sensitive to the pressure distribution,and the sensitivity decreases as the local favorable pressure gradient increases.The proposed sensitivity analysis method enables robust natural laminar flow wings design.展开更多
The professor Wei-hua ZHANG’s experiences in treatment of primary dysmenorrhea with"warmingunblocking needling method"was introduced in this paper.Prof.Zhang believes that obstruction is the crucial in path...The professor Wei-hua ZHANG’s experiences in treatment of primary dysmenorrhea with"warmingunblocking needling method"was introduced in this paper.Prof.Zhang believes that obstruction is the crucial in pathogenesis of primary dysmenorrhea no matter of the excess or the deficiency syndrome.Warming and unblocking principle is the essential in treatment.Hence,an unique therapeutic method is innovated,named warming-unblocking needling method,including three-layer and two-direction warming needling technique at Sanyinjiao(三阴交SP6),two-layer rotating warming-unblocking technique at Zhongji(中极CV3)and one-layer and two-direction warming needling technique at Ciliao(次髎BL32).In this set of needling procedure,acupoint is viewed as a three-dimensional hierarchical structure.A layered and multidirectional needling technique is adopted at main acupoints to enhance the sensations of diqi and to generate heat effect in the local.Additionally,moxibustion is combined to intensify warming and unblocking effect.Simultaneously,the supplementary acupoints are used in response to symptoms.All of the acupoints coordinately warm up the uterus,promote meridian circulation and stop pain.Hence,this therapeutic method achieves relatively excellent effect and deserves to be promoted in practice.展开更多
文摘A new statistical method, the fuzzy analytical method, was introduced in the optimization processes of liposome preparation. It took the full advantage of the information from orthogonal experiments to obtain the optimal liposome preparation conditions by considering all the evaluation indexes. Liposomes were made by the modified reverse-phase evaporation method and the properties of liposomes including size, encapsulation efficiency and physical stability were selected as the evaluation indexes to indicate the quality of liposomes. The experimental data of these properties were analyzed by three different methods including direct observation, variance analysis and fuzzy analytical method. The optimal preparation conditions obtained from these methods were validated with further experiments. The results of all possible combinations of levels for all factors in orthogonal experiments were acquired by the fuzzy analytical method. All evaluation indexes were taken into account and the optimal preparation condition was obtained. The optimal preparation conditions from direct observation and fuzzy analytical method were different and further validation studies indicated that the optimal conditions obtained from the fuzzy analytical method were in agreement with that from traditional statistical analysis. Fuzzy analytical method avoided the problem resulted from the traditional method, in which different levels of the same factor were obtained when considering different evaluation indexes. More information could be obtained from the fuzzy analytical method and the blind area within the experimental range was eliminated. As a result, fuzzy analytical method can be applied in the optimization processes of liposome preparation.
文摘In this paper,the mission and the thermal environment of the Solar Close Observations and Proximity Experiments(SCOPE)spacecraft are analyzed,and an advanced thermal management system(ATMS)is designed for it.The relationship and functions of the integrated database,the intelligent thermal control system and the efficient liquid cooling system in the ATMS are elaborated upon.For the complex thermal field regulation system and extreme space thermal environment,a modular simulation and thermal field planning method are proposed,and the feasibility of the planning algorithm is verified by numerical simulation.A solar array liquid cooling system is developed,and the system simulation results indicate that the temperatures of the solar arrays meet the requirements as the spacecraft flies by perihelion and aphelion.The advanced thermal management study supports the development of the SCOPE program and provides a reference for the thermal management in other deep-space exploration programs.
基金Important National Science & Technology Specific Projects (2009ZX04001-073)National Natural Science Foundation of China (51105025)
文摘In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment method. Dynamic analysis of a milling machine, which is newly designed for producing turbine blades, has been conducted by utilizing the modal synthesis method. The finite element model is verified and updated by experimental modal analysis （EMA） of the machine tool. The result gained by modal synthesis method is compared with whole-model finite element method （FEM） result as well. According to the orthogonal experiment method, four configuration parameters of machine tool are considered as four factors for dynamic characteristics. The influence of configuration parameters on the first three natural frequencies is obtained by range analysis. It is pointed out that configuration parameter is the most important factor affecting the fundamental frequency of machine tools, and configuration parameter has less effect on lower-order modes of the system than others. The combination of configuration parameters which makes the fundamental frequency reach the maximum value is provided. Through demonstration, the conclusion can be drawn that the influence of configuration parameters on the natural frequencies of machine tools can be analyzed explicitly by the orthogonal experiment method, which offers a new method for estimating the dynamic characteristics of machine tools.
基金Project (No. 51078377) supported by the National Natural Science Foundation of China
文摘This paper studies the excavation collapse at the Xianghu subway station on Hangzhou metro line 1.The objective is to present an overview of this case study and discuss the cause of the failure.Through field investigation and preliminary analysis,the reasons for the excavation collapse were the misuse of the soil parameters,over excavation,incorrect installation of steel struts,invalid monitoring data,and inadequate ground improvement.Finally,a small strain constitutive model was used for further analysis.In order to estimate damage efficiently,the orthogonal array(OA) was introduced for screening the key factor in the numerical experiments.Six estimated indexes including deformations and internal forces of the excavation were taken,and the effectiveness of four factors which may cause the collapse was evaluated.Through numerical experiments and interaction analysis,it is found that the deformation and internal force can be well controlled by jet grouting of the subsoil under the final cutting surface,but increasing the improvement ratio of the jet grouting cannot help optimize the excavation behavior efficiently,and without jet grouting and the fourth level struts,the deformation and internal force of the excavation in this case will far surpass the allowable value.
基金supported by the National Science and Technology Major Project(Nos.J2019-I-0011 and 2017-II0004-0016)。
文摘In order to obtain the surge margin of an aero-engine during its operation,an engine surge experiment is required.A multi-dimensional simulation method for an aero-engine is established in this paper.The simulation of a surge experiment using high-pressure air-injection is then carried out on a turbo-shaft engine to obtain the surge boundary using this method.More specifically,firstly,a body-force model is employed to calculate the compressor performance owing to its capability of capturing the main three-dimensional features of compressor surge and avoiding excessive simulation time required by the traditional fully-three-dimensional Reynolds Averaged Navier-Stokes(RANS)method.Then,a one-dimensional model combining a lumped-parameter plenum model is used for the combustor to account for the propagation of pressure waves and the heat-release process,and a zero-dimensional throttle model is used to mimic the choking effect at the turbine nozzle.Finally,the air-injection system is modeled by imposing an injection boundary condition,which can be used conveniently in changing injection parameters.Based on the established method,the influences of different test parameters,such as the air-injection location,the pressure,the orifice size,the number of injection orifices,and the injection time duration on the surge characteristics and boundary are further studied,which offer effective guidance to optimize an actual experimental design.
基金Supported by National Natural Science Foundation of China (Grant No.51975007)。
文摘Efficiency of calculating a dynamic response is an important point of the compliant mechanism for posture adjustment.Dynamic modeling with low orders of a 2R1T compliant parallel mechanism is studied in the paper.The mechanism with two out-of-plane rotational and one lifting degrees of freedom(DoFs)plays an important role in posture adjustment.Based on elastic beam theory,the stiffness matrix and mass matrix of the beam element are established where the moment of inertia is considered.To improve solving efficiency,a dynamic model with low orders of the mechanism is established based on a modified modal synthesis method.Firstly,each branch of the RPR type mechanism is divided into a substructure.Subsequently,a set of hypothetical modes of each substructure is obtained based on the C-B method.Finally,dynamic equation of the whole mechanism is established by the substructure assembly.A dynamic experiment is conducted to verify the dynamic characteristics of the compliant mechanism.
文摘Maize regional experiment is a an intermediate link for overall assessment and comprehensive evaluation on yielding ability, stable yield, stress, adaptability, and quality traits of new maize varieties in different ecological conditions. It is an essential process for determining whether the new maize varieties can pass the ex- amination and approval for extension. Besides, regional experiment is an important link connecting agricultural scientific researches and agricultural production. In addi- tion, it is a scientific basis for extension and application of new maize varieties in a region. Therefore, the maize regional experiment is of the utmost importance.
基金National Natural Science Foundtion of China(No.11435011)Young Teachers Fund of Nanjing Institute of Technology,China(Nos.QKJ201907 and QKJ201908)+2 种基金China Scholarship Council(No.201708320319)Postgraduate Research and Practice Innovation Program of Jiangsu Province,China(No.KYZZ16-0349)Qing Lan Project of Jiangsu Province,China。
文摘We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing fast Fourier transform,inverse fast Fourier transform and the nonlinear leastsquare fitting on the diffraction pattern taken by a camera,the DIP method can quickly return an analytic expression,whose period is used to calculate widths of single slits.By comparing the measured results by the DIP method and the successional difference(SD)method,we find that for a single slit whose width is 60372μm,the DIP method is more accurate.Experimental results show that for single slits with widths between 40μm and 160μm,the relative error of the DIP method is less than 2.78%.Also,the DIP method can be used to measure the diameter of filament and fibres online in real time.
基金Funded by Beijing Excellent Talents Training Program(No.2014000020124G072)
文摘Carbon nanotubes (CNTs) have potential applications in many fields, chemical vapor deposition (CVD) is an effective method for CNTs preparation. By CVD, the catalytic pyrolysis temperature, pyrolysis time and the size of the raw gas flow have a great influence on yield rate of CNTs and their form. In this paper, the orthogonal experiment analysis method is used for studying the influence factors of yield rate of CNTs. Research results show that, in the suitable temperature range of preparing CNTs, there is relatively more CNTs with excellent morphology, otherwise, if the temperature is too low, the growth of CNTs will not be sufficient; if the temperature is too high, then CNTs will be generated with excessive defects; with longer growth time of suitable pyrolysis of CNTs, higher yield of CNTs will be obtained; CNTs morphology with reaction time is not proportional; too low or too high raw gas flow rate is not conducive to the growth of CNTs. We have found the optimum conditions for the CNTs preparation: pyrolysis temperature 68 degrees C, pyrolysis time 35 min, propylene flow rate of 180 mL/min. The results have a reference value for the preparation of CNTS and their composites.
文摘Despite a multitude of theoretical discussions on China's mixed ownership reform, very few studies have addressed realistic questions concerning the implementation of the reform. The Resolutions of the Third Plenum of the 18 th CPC Central Committee and other reform strategies have outlined the reform of sectors with natural monopoly, including urban public utility sectors. The question is how mixed ownership reform should be carried out in sectors of natural monopoly, or which public utilities sectors should enjoy priority of mixed ownership reform. To answer this question, this paper employs data of large public utility enterprises in China from 1998 to 2008, and estimates the natural monopoly attribute at the industry level and corporate total factor productivity(TFP) using cost function analysis method excluding the impact of product price factor. Based on the difference-indifferences-in-differences(DDD) method of natural experiment, an empirical test is carried out for the relationship among natural monopoly, mixed ownership reform and corporate productivity. Our results suggest that:(1) Statistically, mixed ownership reform cannot significantly increase corporate TFP in sectors with natural monopoly;(2) mixed ownership reform should not be carried out indiscriminately on a nationwide basis and for all public utilities sectors. Such an attempt of reform without distinguishing natural monopoly and the level of competitiveness is fraught with policy uncertainties;(3) relative to sectors with natural monopoly, corporate productivity in competitive sectors after mixed ownership reform will improve more significantly and enjoy greater "policy dividends" of institutional reform. Therefore, mixed ownership reform should be carried out first in competitive sectors.
文摘DOE （design of experiments） is a systematic, rigorous approach to engineering problem-solving that applies principles and techniques at the data collection stage so as to ensure the generation of valid, defensible, and supportable engineering conclusions. This paper presents a comparison of three different experimental designs （full experimental design, fractional design and Taguchi design） aimed at studying the effects of cutting parameters variations on surface finish. The results revealed that the effects obtained by analyzing both fractional and Taguchi designs were comparable to the main effects and two-level interactions obtained by the full factorial design. Thus, we conclude that full factorial design appear to be reliable and more economical since they permit to reduce by a factor the amount of time and effort required to conduct the experimental design without losing valuable information. Thus, we conclude that full factorial design appear to be reliable and more economical and without losing valuable information.
文摘In a teaching experiment, Japanese Grade 9 students investigated how to measure the height of an aerial balloon using different models involving angles and distances, and also to evaluate the models they developed. As novices to mathematical modelling, they needed to decide which of several possible models were both valid and practicable, and the errors in measurement that are likely to arise. Opportunities to construct and use paper models, as scale reductions of the real situation, and discussing their results in small groups were effective in moving forward the thinking of many students on the dimensions mentioned above. While students were less able to identify different sources of errors, many came to appreciate the need to learn trigonometric techniques that are more suitable in dealing with problems of this kind.
文摘Based on the outpatient interview and literature review, the initial framework of the outpatient experience of human caring scale was formed with 9 dimensions of outpatient process. The research aim was to improve the scale by Delphi method. Sixteen experts in medical management, human caring or medical education were invited to evaluate the importance of the dimensions and items of the scale and provided some expertise via filling out the DeLphi consultation questionnaires twice in the consulting round. In the first round, the recovery rate showing the experts＇ positivity was 80%; the coefficient of reliability （Cr） ascertaining the authority of the evaluation was 0.92; the mean and full mark ratios responding the concentration of the evaluation were 2.88-4.94 and 6.25%-93.75% respectively; the coefficients of variation （CV） and the Kendall＇s W determining the concordance of the evaluation were 5.06%-52.15% and 0.21-0.24 respectively. In the second round, the recovery rate was 93.75%; the Cr was 0.93; the mean was 3.93-4.93; the full mark ratios were 26.67%-93.33%; the Kendall＇s W was 0.14- 0.31, the CV was 5.25%-23.61%. Via the two-round Delphi study, the scale that included 10 dimensions and 61 items has been improved. Ten dimensions are pre-hospital medical service, guidance, registration, waiting, diagnosis ＆ treatment, paying, inspection ＆ assay, medicine receiving, therapy/injection/transfusion and global evaluation. It was concluded that Chinese scholars have paid high attention to human caring and outpatient experience. The experts have given high agreements about the dimensions which were established with Chinese outpatient process. The dimensions are different from the similar researches about outpatient experience study. In the future, it is necessary to survey the outpatients to test the construct validity, internal consistency reliability and others of the scale to improve the scale.
基金supported by the National Natural Science Foundation of China (Grant No. 40534023)Public Professional Program of Earth-quake
文摘Three experiments are carried out for earthquake monitoring using electromagnetic （EM） methods in recent years. Some earthquakes occurred in chance of the measurement time period for each experiment and the anomalies were recorded before the shocks. The observation at a site 20 km away from the epicenter of Zhangbei Ms6.2 earthquake in 1998 shows that the apparent resistivity decreases in the strike direction before and/or during the earthquake and the resistivity increases in the decline direction. This anomalous variation in apparent resistivity accounts for about 20%. The apparent resistivities at a site in the epicentral area decrease in the strike and decline directions before and/or during the earthquake and increase after shocks. The experiments using artificial electromagnetic signals with super low frequency carried out in 1999 show that the resolution and stability of electric and magnetic spectra are improved. The spectra of electric and magnetic fields and apparent resistivity at the Baodi station began to anomalously change two days before the Qian＇an earthquake with 120 km distant to the station. The anomalous variation of electric and magnetic spectra is about twice as great as normal variation and the apparent resistivity changes by about 20%. The measurements in active seismic area of Yunnan province in the year 2005 indicate that the electric and magnetic spectra anomalously change by one order before the Taoyuan earthquake about 100 km away from the observatories. But the measurements at the sites in Beijing area 2 000 km away from the epicenter do not show any anomaly.
基金Major Research Plan of National Natural Science Foundation of China under Grant No.90815009the National Natural Science Foundation of China under Grant Nos.51108134,50378031 and 50178027
文摘A shake-table experiment on pile foundations in liquefi able soils composed of liquefi able sand and overlying soft clay is studied. A three-dimensional(3D) effective stress fi nite element(FE) analysis is employed to simulate the experiment. A recently developed multi-surface elasto-plastic constitutive model and a fully coupled dynamic inelastic FE formulation(u-p) are used to model the liquefaction behavior of the sand. The soil domains are discretized using a solid-fl uid fully coupled(u-p) 20-8 noded brick element. The pile is simulated using beam-column elements. Upon careful calibration, very good agreement is obtained between the computed and the measured dynamic behavior of the ground and the pile. A parametric analysis is also conducted on the model to investigate the effect of pile-pinning, pile diameter, pile stiffness, ground inclination angle, superstructure mass and pile head restraints on the ground improvement. It is found that the pile foundation has a noticeable pinning effect that reduces the lateral soil displacement. It is observed that a larger pile diameter and fi xed pile head restraints contribute to decreasing the lateral pile deformation; however, a higher ground inclination angle tends to increase the lateral pile head displacements and pile stiffness, and superstructure mass seems to effectively infl uence the lateral pile displacements.
基金Item Sponsored by National Natural Science Foundation of China (50775196)Provincial Natural Science Foundation of Hebei Province of China(08B017)
文摘For rail rolling by universal mill, a simplified three-dimensional theoretical model was built firstly. The kinematically admissible velocity field of the web, head, and base of rail was determined respectively; moreover, the corresponding strain rate field and the strength of shear strain rate were obtained. Then, the plastic deformation power of corresponding deformation zone, the power consumed on the velocity discontinuity surface, and the power generated by backward slip and forward slip were proposed. According to the upper-bound method, the roiling force of horizontal roll and two vertical rolls could be obtained. For verifying the theoretical model, the universal rolling experiments of 18 kg/m light rail was accomplished in Yanshan University Rolling Laboratory, and the experimental data of 60 kg/m heavy rail universal rolling were obtained from the Anshan Iron and Steel Group Corporation. Compared with the experimental data, the theoretical results of rolling force for 18 kg/m light rail and 60 kg/m heavy rail universal rolling were somewhat greater than experimental data, but in general did not exceed them by 15%. Thus, the simplified model was reliable and feasible for presetting and optimizing the parameters of rolling technology according to the upper-bound method.
基金This work was supported by the National Natural Science Foundation of China under Grant No.40075009 and 40505011.The authors would like to thank the computer center of the College of Science at Zhejiang University for computer support of the 0rigin2K.
文摘A relatively independent and small-scale heavy rainfall event occurred to the south of a slow eastwardmoving meso-α-scale vortex. The analysis shows that a meso-β-scale system is heavily responsible for the intense precipitation. An attempt to simulate it met with some failures. In view of its small scale, short lifetime and relatively sparse observations at the initial time, an adjoint model was used to examine the sensitivity of the meso-β-scale vortex simulation with respect to initial conditions. The adjoint sensitivity indicates how small perturbations of initial model variables anywhere in the model domain can influence the central vorticity of the vortex. The largest sensitivity for both the wind and temperature perturbation is located below 700 hPa, especially at the low level. The largest sensitivity for the water vapor perturbation is located below 500 hPa, especially at the middle and low levels. The horizontal adjoint sensitivity for all variables is mainly located toward the upper reaches of the Yangtze River with respect to the simulated meso-β-scale system in Hunan and Jiangxi provinces with strong locality. The sensitivity shows that warm cyclonic perturbations in the upper reaches can have a great effect on the development of the meso-β-scale vortex. Based on adjoint sensitivity, forward sensitivity experiments were conducted to identify factors influencing the development of the meso-β-scale vortex and to explore ways of improving the prediction. A realistic prediction was achieved by using adjoint sensitivity to modify the initial conditions and implanting a warm cyclone at the initial time in the upper reaches of the river with respect to the meso-β-scale vortex, as is commonly done in tropical cyclone prediction.
文摘In this paper, two novel numerical computation methods are introduced which have been recently developed at Research Institute for Applied Mechanics （ R/AM ）, Kyushu University, for strongly nonlinear wave-body interaction problems, such as ship motions in rough seas and resulting green-water impact on deck. The first method is the CIP-based Cartesian grid method, in which the free surface flow is treated as a multi-phase flow which is solved using a Cartesian grid. The second method is the MPS method, which is a so-called particle method and hence no grid is used. The features and calculation procedures of these numerical methods are described. One validation computation against a newly conducted experiment on a dam break problem, which is also described in this paper, is presented.
基金supported by the National Natural Science Foundation of China(No.12002284)。
文摘Natural laminar flow technology can significantly reduce aircraft aerodynamic drag and has excellent technical appeal for transport aircraft development with high aerodynamic efficiency.Accurately and efficiently predicting the laminar-to-turbulent transition and revealing the maintenance mechanism of laminar flow in a transport aircraft’s flight environment are significant for developing natural laminar flow wings.In this research,we carry out natural laminar flow flight experiments with different Reynolds numbers and angles of attack.The critical N-factor is calibrated as 9.0 using flight experimental data and linear stability theory from a statistical perspective,which makes sure that the relative error of transition location is within 5%.We then implement a simplified e^(N) transition prediction method with a similar accuracy compared with linear stability theory.We compute the sensitivity information for the simplified eN method with an adjointbased method,using the automatic differentiation technique(ADjoint).The impact of Reynolds numbers and pressure distributions on TS waves is analyzed using the sensitivity information.Through the sensitivity analysis,we find that:favorable pressure gradients not only suppress the development of TS waves but also decrease their sensitivity to Reynolds numbers;there exist three special regions which are very sensitive to the pressure distribution,and the sensitivity decreases as the local favorable pressure gradient increases.The proposed sensitivity analysis method enables robust natural laminar flow wings design.
基金Supported by the Second Construction Project of National Physician Master Inheritance Studio:2015,10Shaanxi Provincial Construction Project of Wei-hua Zhang’s Inheritance Studio of Traditional Chinese Medicine(201901-2021.12):2019022Academic School Inheritance Program of Traditional Chinese Medicine Administration Bureau,Shaanxi Province(Shaanxi TCM[2018]No.40-Shaanxi Program of Guo’s Acupuncture Academic School Inheritance Studio)。
文摘The professor Wei-hua ZHANG’s experiences in treatment of primary dysmenorrhea with"warmingunblocking needling method"was introduced in this paper.Prof.Zhang believes that obstruction is the crucial in pathogenesis of primary dysmenorrhea no matter of the excess or the deficiency syndrome.Warming and unblocking principle is the essential in treatment.Hence,an unique therapeutic method is innovated,named warming-unblocking needling method,including three-layer and two-direction warming needling technique at Sanyinjiao(三阴交SP6),two-layer rotating warming-unblocking technique at Zhongji(中极CV3)and one-layer and two-direction warming needling technique at Ciliao(次髎BL32).In this set of needling procedure,acupoint is viewed as a three-dimensional hierarchical structure.A layered and multidirectional needling technique is adopted at main acupoints to enhance the sensations of diqi and to generate heat effect in the local.Additionally,moxibustion is combined to intensify warming and unblocking effect.Simultaneously,the supplementary acupoints are used in response to symptoms.All of the acupoints coordinately warm up the uterus,promote meridian circulation and stop pain.Hence,this therapeutic method achieves relatively excellent effect and deserves to be promoted in practice.
