This paper studied the effects of liquid-solid ratio, temperature, time and pH value on the extraction rate of tea saponin from the cake of Camellia oleifera seeds by using single factor experiment with the cake of Ca...This paper studied the effects of liquid-solid ratio, temperature, time and pH value on the extraction rate of tea saponin from the cake of Camellia oleifera seeds by using single factor experiment with the cake of Camellia oleifera seeds as the raw materials, and water as the extraction solvent, and orthogonal test was used to determine the optimal extraction process conditions. The results showed that the extraction ratio of tea saponin could reach up to 95.50% when the liquidsolid ratio was 11：1, extracting temperature of 80 ℃, extraction time of 6 h, and pH value of 9.展开更多
Indonesian oil sands were systematically separated to investigate their basic composition.The extraction effects of the solvents with different Hilderbrand solubility parameters(HSPs)on the bitumen of Indonesian oil s...Indonesian oil sands were systematically separated to investigate their basic composition.The extraction effects of the solvents with different Hilderbrand solubility parameters(HSPs)on the bitumen of Indonesian oil sands were compared.Furthermore,the Hansen solubility combination parameter(HSCP)and Teas triangle were used to explore rules in the separation of oil sands bitumen via solvent extraction.Finally,the saturates,aromatics,resins,and asphaltenes(SARA)fractions of the bitumen from Indonesian oil sands were analyzed.The results showed that the Indonesian oil sands were oil-wet with a bitumen content of 24.93%.The solvent extraction for bitumen could be accurately and conveniently selected based on the solubility parameter.When the HSPs of the extraction solvent were around 18–19 and the HSCPs were closer to a certain range(δ_(d)=17.5–18.0,δ_(p)=1–3.5,and δ_(h)=2–6),the extraction effect of bitumen from Indonesian oil sands improved,and the primary component affecting the extraction rate of bitumen were asphaltenes.展开更多
Simultaneous recovery of Ni and Co from Fe(Ⅲ)and AI is a critical challenge in hydrometallurgical processes.Recognized solvent extraction systems often struggle with selectivity and effective performance in mixed met...Simultaneous recovery of Ni and Co from Fe(Ⅲ)and AI is a critical challenge in hydrometallurgical processes.Recognized solvent extraction systems often struggle with selectivity and effective performance in mixed metal ion environments.Herein,a new synergistic solvent extraction(SSX)system comprised of a novel pyridine analog,N,N-bis(pyridin-2-ylmethyl)dodecan-1-amine(BPMDA),and dinonylnaphthalene sulfonic acid(DNNSA)with tributyl phosphate as phase modifier is introduced.The SSX system demonstrates high extraction performance achieving>90%for Ni and>97%for Co in a singlestage extraction process,with high selectivity.Under optimal conditions,the selectivity sequence is observed as Co^(2+)(>97%)>Ni^(2+)(>90%)>Mn^(2+)(<20%)>Fe^(3+)(<10%)>Mg^(2+)(<5%)>Al^(3+)(<2%)>Ca^(2+)(<1%).Spectroscopic analysis evidences the preferential binding of BPMDA with Ni and Co in the presence of DNNSA,concurrently achieving a significant reduction in the co-extraction of Fe(Ⅲ)and Al.The selective complexation of Ni and Co using the SSX system offers a highly efficient and selective approach for their extraction,with promising potential for applications in recovery-based processes.展开更多
This study details a comprehensive approach focusing on the effective separation of light rare earth elements(REEs)via solvent extraction technique.A stock solution containing lanthanum,cerium,neodymium,praseodymium,a...This study details a comprehensive approach focusing on the effective separation of light rare earth elements(REEs)via solvent extraction technique.A stock solution containing lanthanum,cerium,neodymium,praseodymium,and samarium was prepared by dissolving their pure mixed oxide(reclaimed from spent Ni-MH batteries)in a diluted HCl solution.Key extractants,including bis(2,4,4-trimethylpentyl)phosphinic acid(Cyanex 272),Cyanex 572,trialkylphosphine oxide(Cyanex 923),and 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester(PC 88A),along with tributyl phosphate(TBP)as a phase modifier,were utilized to form organic systems.The extraction behavior and separability of these systems at various pH levels as well as their extraction mechanisms were investigated.The results demonstrated a direct relationship between the extraction trend and the experimental pH value,with enhanced selectivity when TBP was added.Notably,Nd and Pr exhibited similar extraction behaviors,with minor deviations from Ce,making their separation difficult to achieve.Sm extraction followed a distinct trend,allowing for its separation from other elements at pH≤2.In contrast,La exhibited a low affinity for coordination with extractants when pH was≤3.5,facilitating the separation of other elements from La,which could then be isolated in the raffinate.Among the studied organic systems,combinations of Cyanex 572 and PC 88A with TBP demonstrated superior performance in element separation.Optimum separation factors were calculated withβ_(Ce/La)=12,βNd/La=87,β_(Pr/La)=127,andβ_(Sm/La)=3191 for the former,andβ_(Sm/Ce)=54,β_(Sm/Nd)=20,andβ_(Sm/Pr)=14 for the latter.These findings provide valuable insights for selecting extraction systems and designing experiments for the effective solvent extraction separation of light REEs from their mixture.展开更多
Coal is a versatile energy resource and was a driver of the industrial revolution that transformed the economies of Europe and North America and the trajectory of civilization.In this work,a technoeconomic analysis wa...Coal is a versatile energy resource and was a driver of the industrial revolution that transformed the economies of Europe and North America and the trajectory of civilization.In this work,a technoeconomic analysis was performed for a coal-to-carbonfiber manufacture process developed at the University of Kentucky’s Center for Applied Energy Research.According to this process,coal,with decant oil as the solvent,was converted to mesophase pitch via solvent extraction,and the mesophase pitch was subsequently converted to carbon fiber.The total cost to produce carbon fibers from coal and decant oil via the solvent extraction process was estimated to be$11.50/kg for 50,000-tow pitch carbon fiber with a production volume of 3750 MT/year.The estimated carbon fiber cost was significantly lower than the current commercially available PAN-based carbon fiber price($20–$30/kg).With decant oil recycling rates of 50%and 70%in the solvent extraction process,the manufacturing cost of carbon fiber was estimated to be$9.90/kg and$9.50/kg of carbon fiber,respectively.A cradle-to-gate energy assessment revealed that carbon fiber derived from coal exhibited an embodied energy of 510 MJ/kg,significantly lower than that of conventionally produced carbon fiber from PAN.This notable difference is primarily attributed to the substantially higher conversion rate of coal-based mesophase pitch fibers into carbon fiber,surpassing PAN fibers by 1.6 times.These findings indicate that using coal for carbon fiber production through solvent extraction methods could offer a more energy-efficient and cost-competitive alternative to the traditional PAN based approach.展开更多
In this study,a cleaner method for separation and recovery of V/W/Na in waste selective catalytic reduction(SCR)catalyst alkaline leaching solution was proposed.The method involved membrane electrolysis followed by io...In this study,a cleaner method for separation and recovery of V/W/Na in waste selective catalytic reduction(SCR)catalyst alkaline leaching solution was proposed.The method involved membrane electrolysis followed by ion morphology pretreatme nt and solvent extraction.An acidic V(Ⅴ)/W(Ⅵ)solution was obtained using the me mbrane electrolysis method without adding any other chemical reagents.In addition,Na was recovered in the form of NaOH by product,avoiding the generation of Na containing wastewater.The electrolysis parameters were investigated,the lowest power consumption of 3063 kW·h·t^(-1)NaOH was obtained at a current density of 125 A·m^(-2)and an initial NaOH concentration of 2 mol·L^(-1).After electrolysis,oxalic acid was added to the acidic V/W containing solution,converting V(Ⅴ)negative ion to V(Ⅳ)positive ion.Since W(Ⅵ)ion state remained in negative form,the generation of heteropolyacid ions(W_(x)V_(y)O_(z)^(n-))was prevented.It was found that under the condition of oxalic acid addition/theoretical consumption 1.2 and reaction temperature 75℃,100%V(Ⅴ)was co nverted to V(Ⅳ4).Using 10%N263+10%noctanol+80%sulfonated kerosene as extractant,the highest W(Ⅵ)/V(Ⅳ)separation coefficient of 7559.76was obtained at pH=1.8,O:A ratio=1:1 and extraction time 15 min.With 2 mol·L^(-1)NaOH as stripping reagent,the W stripping efficiency reached 98.50%at O:A ratio=2:1 after 4-stages of stripping.The enrichment of V remained in the solution was realized using P204 as extractant and 20%(mass)H_(2)SO_(4)as stripping reagent.The parameters of extraction/stripping process were investigated,using 10%P204+10%TBP+80%sulfonated kerosene as extractant,the V extraction efficiency reached 97.50%at O:A ratio=1:2after 4 stages of extraction.Using 20%H_(2)SO_(4)as the stripping reagent,the V stripping efficiency was 98.30%at an O:A ratio of 4:1 after five stage s of stripping.After the entire process,a high-purity VOSO_(4)and Na_(2)WO_(4)product solutions were obtained with V/W recovery efficiency 95.84%/98.50%,separately.This study examined a more effective and cleaner method for separating V/W/Na in Na_(2)WO_(4)/NaVO_(3)solution,which may serve as a reference for the separation and recovery of V/W/Na in waste SCR catalysts.展开更多
The extraction experiments of chromium（W） from aqueous waste solution by predispersed solvent extraction （PDSE） process with extractant （HEHPEHE） and its mixture, including acidic extractant （D2EHPA）, alkaline...The extraction experiments of chromium（W） from aqueous waste solution by predispersed solvent extraction （PDSE） process with extractant （HEHPEHE） and its mixture, including acidic extractant （D2EHPA）, alkaline extractant （TOA） and neutral extractant （TBP） were carried out respectively. It is found that the extractant HEHPEHE exhibited high extraction selectivity to chromium（III） from aqueous waste solution. The colloidal liquid aphrons （CLAs） were successfully generated using kerosene as a solvent, HEHPEHE as an extractant, sodium dodecyl benzene sulphate （SDBS） as a surfactant in aqueous phase and polyoxyethylene sorbitol anhydride monolaurate （Tween-20） in oil phase. To study the extraction efficiency and advantages of the PDSE process in the removal of chromium（III）, the effects of major factors, such as initial chromium（III） concentration, volume of colloidal gas aphrons （CGAs）, HEHPEHE volume fraction, phase ratio （solvent phase to water phase）, mass fraction of dodecyl trimethylammonium bromide （HTAB）, mass fraction of SDBS, mass fraction of Tween-20 and initial pH of aqueous waste solution were also investigated and the appropriate process conditions were obtained. Under the appropriate conditions, the extraction efficiency of chromium（III） above 99.9 % can be achieved and the treated aqueous waste solution can be discharged directly without polluting the environment.展开更多
Bottle gourd is a good source of health-beneficial bioactive substances.This research aimed at evaluating the effect of different cooking methods(pressure cooking,microwaving,and frying)and extraction solvents(methano...Bottle gourd is a good source of health-beneficial bioactive substances.This research aimed at evaluating the effect of different cooking methods(pressure cooking,microwaving,and frying)and extraction solvents(methanol,ethanol and butanol)on bottle gourd fruit phenolic compounds and antioxidant capacity.The quantitative estimation of polyphenolic compounds,flavonoids and tannins was estimated by spectrophotometric methods.The antioxidative properties were evaluated using ferric thiocyanate(FTC),thiobarbituric acid(TBA),ferric reducing antioxidant power(FRAP)and 2,2-diphenyl-1-picrylhydrazyl(DPPH)tests using the standard methods.Moreover,quantification of individual polyphenols was carried out by high-performance thin layer chromatography(HPTLC)technique.Frying and pressure-cooking thermal treatments were observed to be the best methods for retaining bioactive molecules.When compared to the raw counterpart,the retention level of total phenol content(TPC)in pressure cooked and fried samples was 23.8%and 13.3%,respectively.Similarly,antioxidant capacity in terms of FRAP was observed to increase by 47.26%after pressure cooking and 28.50%after microwave cooking in respect to the raw sample.The HPTLC results showed that this fruit has high antioxidant capacity and is rich in phenolic acid[gallic(17.83 mg g^(−1)dwb),p-coumaric(6.70 mg g^(−1)dwb)and vanillic(60.66 mg g^(−1)dwb)]and flavonoids[quercetin(24.64 mg g^(−1)dwb)and myrecetin(20.73 mg g^(−1)dwb)].The chromatography indicated destruction and transformation of new phenolic compounds due to heat treatments.The correlation analysis revealed that flavonoids were much more responsible for their antioxidant activity.Cooking methods and extraction solvents affected the retention and recovery of polyphenolic compounds available in bottle gourd fruit.These findings offer valuable information for optimizing cooking techniques to preserve and enhance the nutritional and antioxidant properties of bottle gourd,making it a valuable fruit for a healthy diet.Pressure cooking could be the most suitable cooking treatment as far as retention of bioactive compounds like phenolic acids is concerned.展开更多
To determine the chemical constituents of volatile components in saffron from the Tibet Autonomous Region and the Henan Province of China and to compare the chemical composition difference in the saffron,the total vol...To determine the chemical constituents of volatile components in saffron from the Tibet Autonomous Region and the Henan Province of China and to compare the chemical composition difference in the saffron,the total volatile components were extracted by ultrasonic-assisted solvent extraction（USE）,using five different solvents：diethyl ether,ethanol,ethyl acetate, dichloromethane and acetone,analyzed using gas chromatography-mass spectrometry（GC-MS）and compared to the standard MS data,and their relative contents were calculated by area normalization.The results showed both that USE was an efficient and rapid method for the extraction of the volatile components from saffron and that the components extracted from the same sample using different solvents were different.Comparison of the experimental results of saffron from the Tibet Autonomous Region and the Henan Province of China showed that their volatile components were different in their chemical composition and in their relative percentages.USE/GC-MS is a simple,rapid,and effective method for the analysis of volatile oil components in saffron.展开更多
The solvent extraction technology, was applied to recover Cu^2＋ and Ni^2＋ from plating wastewater.Lix984N was chosen as the extractant due to-its gooff extraction performance. The influence parame-ters were examlned...The solvent extraction technology, was applied to recover Cu^2＋ and Ni^2＋ from plating wastewater.Lix984N was chosen as the extractant due to-its gooff extraction performance. The influence parame-ters were examlned. The results show that the separation of Cu^2＋ and Ni＂ from sulphate medium can be realized by adjusting pH value with the help of Lix984N. For extracting Cu^2＋ and Ni^2＋, the optimal pH values are 4 and 10.5, and the maximal extraction percentages are 92.9% and 93.0%, respectively .With recovered Cu^2＋ and Ni^2＋ stripped in 170g.L^ -1 and 200 g.L^-1 H2SO4 medium, the stripping percentages of Cu^2＋ and Ni^2＋ are 92.9% and 93.0%, respectively. This method is simple and can be used to recover Cu^2＋ and Ni^2＋ from plating wastewater. And a flow sheet for separation of Cu^2＋ and Ni^2＋ is presented.展开更多
Vanadium extraction from stone-coal was investigated by oxygen pressure acid leaching and solvent extraction.The mineralogy of the stone-coal from Tongren City of Guizhou Province,China,was investigated by various det...Vanadium extraction from stone-coal was investigated by oxygen pressure acid leaching and solvent extraction.The mineralogy of the stone-coal from Tongren City of Guizhou Province,China,was investigated by various determination methods. The effects of leaching time,leaching temperature,leaching agent concentration,leaching L/S ratio,granularity of material,additive consumption were investigated based on the mineralogy.The results show that under the conditions of leaching time of 3-4 h, temperature of 150℃,sulfuric acid consumption of 25%?30%,ratio of liquid to solid of 1.2:1,the granularity less than 0.074 mm, additive consumption of 3%-5%,and oxygen pressure of 1.2 MPa,and the vanadium leaching rate can be more than 92%by the method of two-step pressurized acid leaching.The powdery V2O5 product with 99.52%in V2O5 content is obtained by the flowsheet of acid recovery,removing iron by reduction process,solvent extraction,precipitating vanadium with ammonium water,and pyrolysis from the stone-coal oxygen pressure acid-leaching solution.The total recovery efficiency of vanadium is above 85%,which is more than 20%higher than that obtained in the conventional process.Furthermore,the new process does not cause air pollution since no HCl or Cl2 is released by calcination of the raw material.展开更多
A number of synergistic solvent extraction （SSX） systems have been developed to recover nickel, cobalt, zinc and copper from sulphuric and chloride leach solutions by the solvent extraction team of CSIRO, Australia....A number of synergistic solvent extraction （SSX） systems have been developed to recover nickel, cobalt, zinc and copper from sulphuric and chloride leach solutions by the solvent extraction team of CSIRO, Australia. These in- clude （1） Versatic 10/CLXS0 system for the separation of Ni from Ca in sulphate solutions, （2） Versatic 10/4PC system for the separation of Ni and Co from Mn/Mg/Ca in sulphate solutions, （3） Cyanex 471X/HRJ-4277 system for the separation of Zn from Cd in sulphate solutions, （4） Versatic 10/LIX63 system for the separation of Co from Mn/Mg/Ca in sulphate solutions, （5） Versatic 10/LIX63/TBP system for separation of Ni and Co from Mn/Mg/Ca in sulphate solutions, （6） Versatic 10/LIX63 system for the separation of cobalt from nickel in sulphate solutions by difference in kinetics, （7） Cyanex 272/LIX84 system for the separation of Cu/Fe/Zn from Ni/Co in sulphate solutions, （8） Versatic 10/LIX63fFBP system to recover Cu/Ni from strong chloride solutions, and [9） Versatic 10/LIX63 system to separate Cu from Fe in strong chloride solutions. The synergistic effect on metal separation and efficiency is presented and possible industrial applications are demonstrated. The chemical stability of selected SSX systems is also reported.展开更多
The extraction of Sc by acid leaching with CaF2 and solvent extraction with P507 from red mud was proposed.The influence of acid leaching and solvent extraction on recovery of Sc was investigated.The CaF2 can obviousl...The extraction of Sc by acid leaching with CaF2 and solvent extraction with P507 from red mud was proposed.The influence of acid leaching and solvent extraction on recovery of Sc was investigated.The CaF2 can obviously improve the leaching efficiency of Sc and reduce the acid consumption.The leaching efficiency of Sc increases from 74%to 92%and the dosage of acid reduces under suitable conditions by adding 5%CaF2.The minerals in red mud can easily be decomposed and leached into the acid solution with CaF2 through analysis of XRD pattern.The particles of red mud become smaller and multihole.The Sc can be selectively extracted with 10%P507 at the pH value of 0.1 from the acid leaching solution.More than 98%of Sc and less than 10%of Al and Fe are extracted.The SC2O3 with purity of 99%is obtained after the process of reverse extraction with NaOH,H2SO4 dissolution,precipitation by oxalic acid and roasting at 750℃.展开更多
For the development of lithium ion recovery process from seawater, a series of experimental researches were performed. Solvent extraction of lithium ion from aqueous solution using kerosene as solvent was proposed. Li...For the development of lithium ion recovery process from seawater, a series of experimental researches were performed. Solvent extraction of lithium ion from aqueous solution using kerosene as solvent was proposed. Lithium ion is effectively extracted by thenoyltrifluoroace- tone-trioctylphosphine oxide （TTA-TOPO） in kerosene within 80 min. Extraction efficiency is severely influenced by stoichiometric parameters. Among the stoichiometric parameters, volume ratio of aqueous （A） to extraction （E） solution is the most influential parameter. After extrac- tion, lithium ion could be easily stripped from the extraction solution by acidic solutions. Stripping efficiency decreases with pH of acidic solutions, and the kind of acid does not affect the stripping efficiency. Extraction efficiency main- tains at more than 93 % even when the extraction solution is recycled three times. 65 % of lithium ion can be extracted from seawater by this solvent extraction process when magnesium ion is precipitated by NHaOH prior to solvent extraction process. Other metallic ions in seawater decrease the extraction efficiency of lithium ion.展开更多
The behaviour of vanadium（V） extracted from sulfuric acid solution was investigated using Cyanex 923 as an extractant. The effects of the concentration of Cyanex 923 and the pH of the solution were studied. The extr...The behaviour of vanadium（V） extracted from sulfuric acid solution was investigated using Cyanex 923 as an extractant. The effects of the concentration of Cyanex 923 and the pH of the solution were studied. The extraction of vanadium（V） increases with the increase of Cyanex 923 concentration and shaking time. Cyanex 923 can extract vanadium（V） from sulfuric acid solution at low pH conditions, and the best pH conditions for extraction of vanadium（V） are at pH 1.0-2.0. The species extracted into the organic phase is VO2HSO4 with one molecule of Cyanex 923. Equilibrium studies were used to assess the extraction efficiency of vanadium（V） recovery from the sulfuric acid solution.展开更多
N,N-dibutyldiglycol amic acid （HL1） and N,N-dioctyldiglycol nmic acid （HLu） were synthesized and characterized by conventional spectroscopic methods. These molecules were examined as extractants for extraction-sep...N,N-dibutyldiglycol amic acid （HL1） and N,N-dioctyldiglycol nmic acid （HLu） were synthesized and characterized by conventional spectroscopic methods. These molecules were examined as extractants for extraction-separation of La（Ⅲ）, Eu（Ⅲ） and Er（Ⅲ）, as representative ions of light, middle and heavy rare earths, from aqueous chloride solutions. The analysis of the extraction equilibria revealed that the extracted species of lanthanum and europium ions by both of the extractants had a 1：3 metal to ligand ratio It was suggested that erbium ions were extracted into the organic phase via the formation ofEr（LIor Ⅱ）2Cl complexes. The effect of the organic diluents on the extraction-separation efficiency of the studied rare earths by HLI and HLⅡ was investigated by comparing the results obtained in dichloromethane and carbon tetrachloride. Regardless to the diluent used, the order of selectivity presented by the investigated extractants was Er（Ⅲ）〉Eu（Ⅲ）〉La（Ⅲ）. It is noteworthy that, a significant enhancement in separation of the studied rare earths by the extractants was achieved in their competitive extraction experiments with respect to that obtained in single component extraction experiments. Applicability of the extractants for the removal of rare earth ions from spent Ni-MH batteries was tested by removal ofLa（Ⅲ）, Eu（Ⅲ） and Er（Ⅲ） ions from simulated leach solution of such batteries.展开更多
An experimental investigation was presented on the separation of Cu（Ⅱ）, Zn（Ⅱ）, and Cd（Ⅱ） from a rich sulfate leachate of zinc slag by solvent extraction. The results of orthogonal experiments indicate that LI...An experimental investigation was presented on the separation of Cu（Ⅱ）, Zn（Ⅱ）, and Cd（Ⅱ） from a rich sulfate leachate of zinc slag by solvent extraction. The results of orthogonal experiments indicate that LIX 984N is highly selective and very efficient in the extraction of Cu（Ⅱ）, and the analysis of variance indicates that the sequence of parameters according to their influence on the separation efficiency is phase ratio 〉 LIX 984N concentration 〉 pH value 〉 extraction time. The optimal condition for copper extraction is obtained as 25% of LIX 984N concentration, 7 rain of extraction time, 3：2 of phase ratio O/A, and pH = 1.7. The separation of Zn（Ⅱ） and Cd（Ⅱ） was performed after the copper extraction from the raffinate. Comparative analysis of the separation with di-2-ethylhexyl phosphoric acid （D2EHPA）, D2EHPA-tributyl- phosophate （TBP） synergistic extracting system, and 2-ethylhexyl phosphonic acid mono 2-ethylhexyl ester （HEHEHP） was made at pH = 2.0. It is demonstrated that the extraction efficiency with D2EHPA is improved after being saponified by sodium hydroxide, and D2EHPA-TBP synergistic extracting, as well as HEHEHP, has a superior selectivity to Zn（Ⅱ） over Cd（Ⅱ）.展开更多
A P204 （D2EHPA） diluted with sulfonated kerosene was used for the selective extraction of molybdenum from an acidic Ni-Mo ore leach solution that was reduced using sodium thiosulfate. The results indicate that P204 ...A P204 （D2EHPA） diluted with sulfonated kerosene was used for the selective extraction of molybdenum from an acidic Ni-Mo ore leach solution that was reduced using sodium thiosulfate. The results indicate that P204 （D2EHPA） is an effective extractant for the extraction of molybdenum. The extraction of Mo is more than 90 % at pH of 0.5, contact time of 10 min, and organic-to- aqueous phase （O/A） ratio of 1：1 with 10 vol% P204 （D2EHPA）. Molybdenum in the loaded organic phase can be effectively stripped with ammonium acid carbonate solution, and the stripping of molybdenum with 60 g.L-1 ammonium acid carbonate solution is 94.67 % at O/A ratio of 2：1 and contact time of 10 min.展开更多
A direct solvent extraction（DSX） process for purifying nickel and cobalt from the nitric acid leach solution of nickel laterite ores was conceived and experimentally probed. The proposed process consists of two solv...A direct solvent extraction（DSX） process for purifying nickel and cobalt from the nitric acid leach solution of nickel laterite ores was conceived and experimentally probed. The proposed process consists of two solvent extraction（SX） steps but with only one extractant - bis（2,4,4-trimethylpentyl）phosphinic acid（Cyanex？ 272） - used in both steps. The first extraction step involved the removal of aluminum and zinc, whereas the second extraction step involved the separation of cobalt along with manganese from nickel. The experimental results showed essentially quantitative removal of aluminum（〉97%） and zinc（〉99%） in a single extraction stage using 20vol% Cyanex 272 at pH 2.1. Some cobalt（32%） and manganese（55%） were co-extracted but were easily scrubbed out completely from the loaded organic phase using dilute sulfuric acid at pH ≤ 1.38. Cobalt and manganese in the first extraction raffinate were extracted completely in four extraction stages at staggered pH values of 4.0, 4.4, 4.5, and 4.0 in the first, second, third, and fourth stages, respectively, using also 20vol% Cyanex 272. A small amount of nickel（up to 6.6%） was co-extracted but was easily scrubbed out completely with dilute sulfuric acid at pH 2.0. A flow diagram showing the input and output conditions and the metals separated under the deduced optimum conditions is presented.展开更多
The application of soxhlet, ultrasonic and accelerated solvent extractiontechniques to the analysis of six organochlorine pesticides (α-HCH, β-HCH, γ-HCH, o, p'-DDT,p,p'-DDT and p,p'-DDE) in Taihu Lake ...The application of soxhlet, ultrasonic and accelerated solvent extractiontechniques to the analysis of six organochlorine pesticides (α-HCH, β-HCH, γ-HCH, o, p'-DDT,p,p'-DDT and p,p'-DDE) in Taihu Lake sediment samples is described. It was found that the limits ofquantification ranged from 0.002 μg g^(-1) to 0.004 μg g^(-1), and the recoveries oforganochlorine pesticides with the three extraction techniques were acceptable ( 】80.7%). With amass selective detector, better results were obtained by accelerated solvent extraction usinghexane-acetone (1:1) as compared with soxhlet and ultrasonic extraction. It was shown that theaccelerated solvent extraction was the optimum technique for the analysis of organochlorinepesticides in sediments. The general features of the three extraction techniques are also presented.展开更多
文摘This paper studied the effects of liquid-solid ratio, temperature, time and pH value on the extraction rate of tea saponin from the cake of Camellia oleifera seeds by using single factor experiment with the cake of Camellia oleifera seeds as the raw materials, and water as the extraction solvent, and orthogonal test was used to determine the optimal extraction process conditions. The results showed that the extraction ratio of tea saponin could reach up to 95.50% when the liquidsolid ratio was 11：1, extracting temperature of 80 ℃, extraction time of 6 h, and pH value of 9.
基金supported by the Natural Science Foundation of Jiangsu Province(Grant number:BK20140260)Joint Project of Industry-University-Research of Jiangsu Province(Grant number:BY2018158,BY2021590)State Key Laboratory of Heavy Oil Processing.
文摘Indonesian oil sands were systematically separated to investigate their basic composition.The extraction effects of the solvents with different Hilderbrand solubility parameters(HSPs)on the bitumen of Indonesian oil sands were compared.Furthermore,the Hansen solubility combination parameter(HSCP)and Teas triangle were used to explore rules in the separation of oil sands bitumen via solvent extraction.Finally,the saturates,aromatics,resins,and asphaltenes(SARA)fractions of the bitumen from Indonesian oil sands were analyzed.The results showed that the Indonesian oil sands were oil-wet with a bitumen content of 24.93%.The solvent extraction for bitumen could be accurately and conveniently selected based on the solubility parameter.When the HSPs of the extraction solvent were around 18–19 and the HSCPs were closer to a certain range(δ_(d)=17.5–18.0,δ_(p)=1–3.5,and δ_(h)=2–6),the extraction effect of bitumen from Indonesian oil sands improved,and the primary component affecting the extraction rate of bitumen were asphaltenes.
基金supported by the National Natural Science Foundation of China(22278407,22001147,21922814,22138012,22178349)CAS Project for Young Scientists in Basic Research(YSBR-038)+2 种基金the Ministry of Science and Technology of China(2021YFC2901500)Excellent Member in Youth Innovation Promotion Association,Chinese Academy of Sciences(Y202014)Shandong Energy Institute(SEI U202306).
文摘Simultaneous recovery of Ni and Co from Fe(Ⅲ)and AI is a critical challenge in hydrometallurgical processes.Recognized solvent extraction systems often struggle with selectivity and effective performance in mixed metal ion environments.Herein,a new synergistic solvent extraction(SSX)system comprised of a novel pyridine analog,N,N-bis(pyridin-2-ylmethyl)dodecan-1-amine(BPMDA),and dinonylnaphthalene sulfonic acid(DNNSA)with tributyl phosphate as phase modifier is introduced.The SSX system demonstrates high extraction performance achieving>90%for Ni and>97%for Co in a singlestage extraction process,with high selectivity.Under optimal conditions,the selectivity sequence is observed as Co^(2+)(>97%)>Ni^(2+)(>90%)>Mn^(2+)(<20%)>Fe^(3+)(<10%)>Mg^(2+)(<5%)>Al^(3+)(<2%)>Ca^(2+)(<1%).Spectroscopic analysis evidences the preferential binding of BPMDA with Ni and Co in the presence of DNNSA,concurrently achieving a significant reduction in the co-extraction of Fe(Ⅲ)and Al.The selective complexation of Ni and Co using the SSX system offers a highly efficient and selective approach for their extraction,with promising potential for applications in recovery-based processes.
基金support from the Australian Research Council’s Industrial Transformation Research Hub funding scheme(project IH190100009).
文摘This study details a comprehensive approach focusing on the effective separation of light rare earth elements(REEs)via solvent extraction technique.A stock solution containing lanthanum,cerium,neodymium,praseodymium,and samarium was prepared by dissolving their pure mixed oxide(reclaimed from spent Ni-MH batteries)in a diluted HCl solution.Key extractants,including bis(2,4,4-trimethylpentyl)phosphinic acid(Cyanex 272),Cyanex 572,trialkylphosphine oxide(Cyanex 923),and 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester(PC 88A),along with tributyl phosphate(TBP)as a phase modifier,were utilized to form organic systems.The extraction behavior and separability of these systems at various pH levels as well as their extraction mechanisms were investigated.The results demonstrated a direct relationship between the extraction trend and the experimental pH value,with enhanced selectivity when TBP was added.Notably,Nd and Pr exhibited similar extraction behaviors,with minor deviations from Ce,making their separation difficult to achieve.Sm extraction followed a distinct trend,allowing for its separation from other elements at pH≤2.In contrast,La exhibited a low affinity for coordination with extractants when pH was≤3.5,facilitating the separation of other elements from La,which could then be isolated in the raffinate.Among the studied organic systems,combinations of Cyanex 572 and PC 88A with TBP demonstrated superior performance in element separation.Optimum separation factors were calculated withβ_(Ce/La)=12,βNd/La=87,β_(Pr/La)=127,andβ_(Sm/La)=3191 for the former,andβ_(Sm/Ce)=54,β_(Sm/Nd)=20,andβ_(Sm/Pr)=14 for the latter.These findings provide valuable insights for selecting extraction systems and designing experiments for the effective solvent extraction separation of light REEs from their mixture.
基金sponsored by the US Department of Energy Fossil Energy and Carbon Management Program,project FEAA157 under contract DE-AC05-00OR22725 with UTBattelle,LLC.
文摘Coal is a versatile energy resource and was a driver of the industrial revolution that transformed the economies of Europe and North America and the trajectory of civilization.In this work,a technoeconomic analysis was performed for a coal-to-carbonfiber manufacture process developed at the University of Kentucky’s Center for Applied Energy Research.According to this process,coal,with decant oil as the solvent,was converted to mesophase pitch via solvent extraction,and the mesophase pitch was subsequently converted to carbon fiber.The total cost to produce carbon fibers from coal and decant oil via the solvent extraction process was estimated to be$11.50/kg for 50,000-tow pitch carbon fiber with a production volume of 3750 MT/year.The estimated carbon fiber cost was significantly lower than the current commercially available PAN-based carbon fiber price($20–$30/kg).With decant oil recycling rates of 50%and 70%in the solvent extraction process,the manufacturing cost of carbon fiber was estimated to be$9.90/kg and$9.50/kg of carbon fiber,respectively.A cradle-to-gate energy assessment revealed that carbon fiber derived from coal exhibited an embodied energy of 510 MJ/kg,significantly lower than that of conventionally produced carbon fiber from PAN.This notable difference is primarily attributed to the substantially higher conversion rate of coal-based mesophase pitch fibers into carbon fiber,surpassing PAN fibers by 1.6 times.These findings indicate that using coal for carbon fiber production through solvent extraction methods could offer a more energy-efficient and cost-competitive alternative to the traditional PAN based approach.
基金the support the National Natural Science Foundation of China(5210440)S&T Program of Hebei(23311501D)Program of HBIS Group under HG2023222。
文摘In this study,a cleaner method for separation and recovery of V/W/Na in waste selective catalytic reduction(SCR)catalyst alkaline leaching solution was proposed.The method involved membrane electrolysis followed by ion morphology pretreatme nt and solvent extraction.An acidic V(Ⅴ)/W(Ⅵ)solution was obtained using the me mbrane electrolysis method without adding any other chemical reagents.In addition,Na was recovered in the form of NaOH by product,avoiding the generation of Na containing wastewater.The electrolysis parameters were investigated,the lowest power consumption of 3063 kW·h·t^(-1)NaOH was obtained at a current density of 125 A·m^(-2)and an initial NaOH concentration of 2 mol·L^(-1).After electrolysis,oxalic acid was added to the acidic V/W containing solution,converting V(Ⅴ)negative ion to V(Ⅳ)positive ion.Since W(Ⅵ)ion state remained in negative form,the generation of heteropolyacid ions(W_(x)V_(y)O_(z)^(n-))was prevented.It was found that under the condition of oxalic acid addition/theoretical consumption 1.2 and reaction temperature 75℃,100%V(Ⅴ)was co nverted to V(Ⅳ4).Using 10%N263+10%noctanol+80%sulfonated kerosene as extractant,the highest W(Ⅵ)/V(Ⅳ)separation coefficient of 7559.76was obtained at pH=1.8,O:A ratio=1:1 and extraction time 15 min.With 2 mol·L^(-1)NaOH as stripping reagent,the W stripping efficiency reached 98.50%at O:A ratio=2:1 after 4-stages of stripping.The enrichment of V remained in the solution was realized using P204 as extractant and 20%(mass)H_(2)SO_(4)as stripping reagent.The parameters of extraction/stripping process were investigated,using 10%P204+10%TBP+80%sulfonated kerosene as extractant,the V extraction efficiency reached 97.50%at O:A ratio=1:2after 4 stages of extraction.Using 20%H_(2)SO_(4)as the stripping reagent,the V stripping efficiency was 98.30%at an O:A ratio of 4:1 after five stage s of stripping.After the entire process,a high-purity VOSO_(4)and Na_(2)WO_(4)product solutions were obtained with V/W recovery efficiency 95.84%/98.50%,separately.This study examined a more effective and cleaner method for separating V/W/Na in Na_(2)WO_(4)/NaVO_(3)solution,which may serve as a reference for the separation and recovery of V/W/Na in waste SCR catalysts.
基金Project (NCET-07-0577) supported by New Century Excellent Talents of Ministry of Education, China
文摘The extraction experiments of chromium（W） from aqueous waste solution by predispersed solvent extraction （PDSE） process with extractant （HEHPEHE） and its mixture, including acidic extractant （D2EHPA）, alkaline extractant （TOA） and neutral extractant （TBP） were carried out respectively. It is found that the extractant HEHPEHE exhibited high extraction selectivity to chromium（III） from aqueous waste solution. The colloidal liquid aphrons （CLAs） were successfully generated using kerosene as a solvent, HEHPEHE as an extractant, sodium dodecyl benzene sulphate （SDBS） as a surfactant in aqueous phase and polyoxyethylene sorbitol anhydride monolaurate （Tween-20） in oil phase. To study the extraction efficiency and advantages of the PDSE process in the removal of chromium（III）, the effects of major factors, such as initial chromium（III） concentration, volume of colloidal gas aphrons （CGAs）, HEHPEHE volume fraction, phase ratio （solvent phase to water phase）, mass fraction of dodecyl trimethylammonium bromide （HTAB）, mass fraction of SDBS, mass fraction of Tween-20 and initial pH of aqueous waste solution were also investigated and the appropriate process conditions were obtained. Under the appropriate conditions, the extraction efficiency of chromium（III） above 99.9 % can be achieved and the treated aqueous waste solution can be discharged directly without polluting the environment.
基金supported by the University Grant Commission(UGC)of India.
文摘Bottle gourd is a good source of health-beneficial bioactive substances.This research aimed at evaluating the effect of different cooking methods(pressure cooking,microwaving,and frying)and extraction solvents(methanol,ethanol and butanol)on bottle gourd fruit phenolic compounds and antioxidant capacity.The quantitative estimation of polyphenolic compounds,flavonoids and tannins was estimated by spectrophotometric methods.The antioxidative properties were evaluated using ferric thiocyanate(FTC),thiobarbituric acid(TBA),ferric reducing antioxidant power(FRAP)and 2,2-diphenyl-1-picrylhydrazyl(DPPH)tests using the standard methods.Moreover,quantification of individual polyphenols was carried out by high-performance thin layer chromatography(HPTLC)technique.Frying and pressure-cooking thermal treatments were observed to be the best methods for retaining bioactive molecules.When compared to the raw counterpart,the retention level of total phenol content(TPC)in pressure cooked and fried samples was 23.8%and 13.3%,respectively.Similarly,antioxidant capacity in terms of FRAP was observed to increase by 47.26%after pressure cooking and 28.50%after microwave cooking in respect to the raw sample.The HPTLC results showed that this fruit has high antioxidant capacity and is rich in phenolic acid[gallic(17.83 mg g^(−1)dwb),p-coumaric(6.70 mg g^(−1)dwb)and vanillic(60.66 mg g^(−1)dwb)]and flavonoids[quercetin(24.64 mg g^(−1)dwb)and myrecetin(20.73 mg g^(−1)dwb)].The chromatography indicated destruction and transformation of new phenolic compounds due to heat treatments.The correlation analysis revealed that flavonoids were much more responsible for their antioxidant activity.Cooking methods and extraction solvents affected the retention and recovery of polyphenolic compounds available in bottle gourd fruit.These findings offer valuable information for optimizing cooking techniques to preserve and enhance the nutritional and antioxidant properties of bottle gourd,making it a valuable fruit for a healthy diet.Pressure cooking could be the most suitable cooking treatment as far as retention of bioactive compounds like phenolic acids is concerned.
文摘To determine the chemical constituents of volatile components in saffron from the Tibet Autonomous Region and the Henan Province of China and to compare the chemical composition difference in the saffron,the total volatile components were extracted by ultrasonic-assisted solvent extraction（USE）,using five different solvents：diethyl ether,ethanol,ethyl acetate, dichloromethane and acetone,analyzed using gas chromatography-mass spectrometry（GC-MS）and compared to the standard MS data,and their relative contents were calculated by area normalization.The results showed both that USE was an efficient and rapid method for the extraction of the volatile components from saffron and that the components extracted from the same sample using different solvents were different.Comparison of the experimental results of saffron from the Tibet Autonomous Region and the Henan Province of China showed that their volatile components were different in their chemical composition and in their relative percentages.USE/GC-MS is a simple,rapid,and effective method for the analysis of volatile oil components in saffron.
基金Supported by the National Key Technologies Research and Development Program of China during the 1 lth Five-Year Plan Period （2007BAB22B01） and the Young Science Foundation of Jiangxi Province Education Office （GJJ11124）.
文摘The solvent extraction technology, was applied to recover Cu^2＋ and Ni^2＋ from plating wastewater.Lix984N was chosen as the extractant due to-its gooff extraction performance. The influence parame-ters were examlned. The results show that the separation of Cu^2＋ and Ni＂ from sulphate medium can be realized by adjusting pH value with the help of Lix984N. For extracting Cu^2＋ and Ni^2＋, the optimal pH values are 4 and 10.5, and the maximal extraction percentages are 92.9% and 93.0%, respectively .With recovered Cu^2＋ and Ni^2＋ stripped in 170g.L^ -1 and 200 g.L^-1 H2SO4 medium, the stripping percentages of Cu^2＋ and Ni^2＋ are 92.9% and 93.0%, respectively. This method is simple and can be used to recover Cu^2＋ and Ni^2＋ from plating wastewater. And a flow sheet for separation of Cu^2＋ and Ni^2＋ is presented.
基金Project(2006AA06Z130)supported by the High-tech Research and Development Program of ChinaProject(50874053)supported by the National Natural Science Foundation of ChinaProject(2007GA010)supported by Science and Technology Bureau of Yunnan Province,China
文摘Vanadium extraction from stone-coal was investigated by oxygen pressure acid leaching and solvent extraction.The mineralogy of the stone-coal from Tongren City of Guizhou Province,China,was investigated by various determination methods. The effects of leaching time,leaching temperature,leaching agent concentration,leaching L/S ratio,granularity of material,additive consumption were investigated based on the mineralogy.The results show that under the conditions of leaching time of 3-4 h, temperature of 150℃,sulfuric acid consumption of 25%?30%,ratio of liquid to solid of 1.2:1,the granularity less than 0.074 mm, additive consumption of 3%-5%,and oxygen pressure of 1.2 MPa,and the vanadium leaching rate can be more than 92%by the method of two-step pressurized acid leaching.The powdery V2O5 product with 99.52%in V2O5 content is obtained by the flowsheet of acid recovery,removing iron by reduction process,solvent extraction,precipitating vanadium with ammonium water,and pyrolysis from the stone-coal oxygen pressure acid-leaching solution.The total recovery efficiency of vanadium is above 85%,which is more than 20%higher than that obtained in the conventional process.Furthermore,the new process does not cause air pollution since no HCl or Cl2 is released by calcination of the raw material.
文摘A number of synergistic solvent extraction （SSX） systems have been developed to recover nickel, cobalt, zinc and copper from sulphuric and chloride leach solutions by the solvent extraction team of CSIRO, Australia. These in- clude （1） Versatic 10/CLXS0 system for the separation of Ni from Ca in sulphate solutions, （2） Versatic 10/4PC system for the separation of Ni and Co from Mn/Mg/Ca in sulphate solutions, （3） Cyanex 471X/HRJ-4277 system for the separation of Zn from Cd in sulphate solutions, （4） Versatic 10/LIX63 system for the separation of Co from Mn/Mg/Ca in sulphate solutions, （5） Versatic 10/LIX63/TBP system for separation of Ni and Co from Mn/Mg/Ca in sulphate solutions, （6） Versatic 10/LIX63 system for the separation of cobalt from nickel in sulphate solutions by difference in kinetics, （7） Cyanex 272/LIX84 system for the separation of Cu/Fe/Zn from Ni/Co in sulphate solutions, （8） Versatic 10/LIX63fFBP system to recover Cu/Ni from strong chloride solutions, and [9） Versatic 10/LIX63 system to separate Cu from Fe in strong chloride solutions. The synergistic effect on metal separation and efficiency is presented and possible industrial applications are demonstrated. The chemical stability of selected SSX systems is also reported.
基金Project supported by the National Natural Science Foundation of China(51804103,51904097)Fundamental Research Funds for the Universities of Henan Province(NSFRF180319)the Scientific and Technological Project of Henan Province(172102310679,182102310846)。
文摘The extraction of Sc by acid leaching with CaF2 and solvent extraction with P507 from red mud was proposed.The influence of acid leaching and solvent extraction on recovery of Sc was investigated.The CaF2 can obviously improve the leaching efficiency of Sc and reduce the acid consumption.The leaching efficiency of Sc increases from 74%to 92%and the dosage of acid reduces under suitable conditions by adding 5%CaF2.The minerals in red mud can easily be decomposed and leached into the acid solution with CaF2 through analysis of XRD pattern.The particles of red mud become smaller and multihole.The Sc can be selectively extracted with 10%P507 at the pH value of 0.1 from the acid leaching solution.More than 98%of Sc and less than 10%of Al and Fe are extracted.The SC2O3 with purity of 99%is obtained after the process of reverse extraction with NaOH,H2SO4 dissolution,precipitation by oxalic acid and roasting at 750℃.
基金financially supported by the Research Grant of Pukyong National University (2014)
文摘For the development of lithium ion recovery process from seawater, a series of experimental researches were performed. Solvent extraction of lithium ion from aqueous solution using kerosene as solvent was proposed. Lithium ion is effectively extracted by thenoyltrifluoroace- tone-trioctylphosphine oxide （TTA-TOPO） in kerosene within 80 min. Extraction efficiency is severely influenced by stoichiometric parameters. Among the stoichiometric parameters, volume ratio of aqueous （A） to extraction （E） solution is the most influential parameter. After extrac- tion, lithium ion could be easily stripped from the extraction solution by acidic solutions. Stripping efficiency decreases with pH of acidic solutions, and the kind of acid does not affect the stripping efficiency. Extraction efficiency main- tains at more than 93 % even when the extraction solution is recycled three times. 65 % of lithium ion can be extracted from seawater by this solvent extraction process when magnesium ion is precipitated by NHaOH prior to solvent extraction process. Other metallic ions in seawater decrease the extraction efficiency of lithium ion.
基金supported by the Science Foundation of Central South University (No. 76112037) the Postdoctoral Science Foundation of Central South University
文摘The behaviour of vanadium（V） extracted from sulfuric acid solution was investigated using Cyanex 923 as an extractant. The effects of the concentration of Cyanex 923 and the pH of the solution were studied. The extraction of vanadium（V） increases with the increase of Cyanex 923 concentration and shaking time. Cyanex 923 can extract vanadium（V） from sulfuric acid solution at low pH conditions, and the best pH conditions for extraction of vanadium（V） are at pH 1.0-2.0. The species extracted into the organic phase is VO2HSO4 with one molecule of Cyanex 923. Equilibrium studies were used to assess the extraction efficiency of vanadium（V） recovery from the sulfuric acid solution.
文摘N,N-dibutyldiglycol amic acid （HL1） and N,N-dioctyldiglycol nmic acid （HLu） were synthesized and characterized by conventional spectroscopic methods. These molecules were examined as extractants for extraction-separation of La（Ⅲ）, Eu（Ⅲ） and Er（Ⅲ）, as representative ions of light, middle and heavy rare earths, from aqueous chloride solutions. The analysis of the extraction equilibria revealed that the extracted species of lanthanum and europium ions by both of the extractants had a 1：3 metal to ligand ratio It was suggested that erbium ions were extracted into the organic phase via the formation ofEr（LIor Ⅱ）2Cl complexes. The effect of the organic diluents on the extraction-separation efficiency of the studied rare earths by HLI and HLⅡ was investigated by comparing the results obtained in dichloromethane and carbon tetrachloride. Regardless to the diluent used, the order of selectivity presented by the investigated extractants was Er（Ⅲ）〉Eu（Ⅲ）〉La（Ⅲ）. It is noteworthy that, a significant enhancement in separation of the studied rare earths by the extractants was achieved in their competitive extraction experiments with respect to that obtained in single component extraction experiments. Applicability of the extractants for the removal of rare earth ions from spent Ni-MH batteries was tested by removal ofLa（Ⅲ）, Eu（Ⅲ） and Er（Ⅲ） ions from simulated leach solution of such batteries.
文摘An experimental investigation was presented on the separation of Cu（Ⅱ）, Zn（Ⅱ）, and Cd（Ⅱ） from a rich sulfate leachate of zinc slag by solvent extraction. The results of orthogonal experiments indicate that LIX 984N is highly selective and very efficient in the extraction of Cu（Ⅱ）, and the analysis of variance indicates that the sequence of parameters according to their influence on the separation efficiency is phase ratio 〉 LIX 984N concentration 〉 pH value 〉 extraction time. The optimal condition for copper extraction is obtained as 25% of LIX 984N concentration, 7 rain of extraction time, 3：2 of phase ratio O/A, and pH = 1.7. The separation of Zn（Ⅱ） and Cd（Ⅱ） was performed after the copper extraction from the raffinate. Comparative analysis of the separation with di-2-ethylhexyl phosphoric acid （D2EHPA）, D2EHPA-tributyl- phosophate （TBP） synergistic extracting system, and 2-ethylhexyl phosphonic acid mono 2-ethylhexyl ester （HEHEHP） was made at pH = 2.0. It is demonstrated that the extraction efficiency with D2EHPA is improved after being saponified by sodium hydroxide, and D2EHPA-TBP synergistic extracting, as well as HEHEHP, has a superior selectivity to Zn（Ⅱ） over Cd（Ⅱ）.
基金financially supported by the National Natural Science Foundation of China(No.51104186)
文摘A P204 （D2EHPA） diluted with sulfonated kerosene was used for the selective extraction of molybdenum from an acidic Ni-Mo ore leach solution that was reduced using sodium thiosulfate. The results indicate that P204 （D2EHPA） is an effective extractant for the extraction of molybdenum. The extraction of Mo is more than 90 % at pH of 0.5, contact time of 10 min, and organic-to- aqueous phase （O/A） ratio of 1：1 with 10 vol% P204 （D2EHPA）. Molybdenum in the loaded organic phase can be effectively stripped with ammonium acid carbonate solution, and the stripping of molybdenum with 60 g.L-1 ammonium acid carbonate solution is 94.67 % at O/A ratio of 2：1 and contact time of 10 min.
基金the Indonesia Endowment Fund for Education(LPDP)for the scholarship of Z.T.Ichlas,Shell Chemicals for supplying ShellS ol 2046 and Cytec Australia for supplying Cyanex 272
文摘A direct solvent extraction（DSX） process for purifying nickel and cobalt from the nitric acid leach solution of nickel laterite ores was conceived and experimentally probed. The proposed process consists of two solvent extraction（SX） steps but with only one extractant - bis（2,4,4-trimethylpentyl）phosphinic acid（Cyanex？ 272） - used in both steps. The first extraction step involved the removal of aluminum and zinc, whereas the second extraction step involved the separation of cobalt along with manganese from nickel. The experimental results showed essentially quantitative removal of aluminum（〉97%） and zinc（〉99%） in a single extraction stage using 20vol% Cyanex 272 at pH 2.1. Some cobalt（32%） and manganese（55%） were co-extracted but were easily scrubbed out completely from the loaded organic phase using dilute sulfuric acid at pH ≤ 1.38. Cobalt and manganese in the first extraction raffinate were extracted completely in four extraction stages at staggered pH values of 4.0, 4.4, 4.5, and 4.0 in the first, second, third, and fourth stages, respectively, using also 20vol% Cyanex 272. A small amount of nickel（up to 6.6%） was co-extracted but was easily scrubbed out completely with dilute sulfuric acid at pH 2.0. A flow diagram showing the input and output conditions and the metals separated under the deduced optimum conditions is presented.
文摘The application of soxhlet, ultrasonic and accelerated solvent extractiontechniques to the analysis of six organochlorine pesticides (α-HCH, β-HCH, γ-HCH, o, p'-DDT,p,p'-DDT and p,p'-DDE) in Taihu Lake sediment samples is described. It was found that the limits ofquantification ranged from 0.002 μg g^(-1) to 0.004 μg g^(-1), and the recoveries oforganochlorine pesticides with the three extraction techniques were acceptable ( 】80.7%). With amass selective detector, better results were obtained by accelerated solvent extraction usinghexane-acetone (1:1) as compared with soxhlet and ultrasonic extraction. It was shown that theaccelerated solvent extraction was the optimum technique for the analysis of organochlorinepesticides in sediments. The general features of the three extraction techniques are also presented.
