Structural transfer zones in a half-graben rift basin play a significant role in controlling sandy sediments and providing a target for hydrocarbon exploration. Previous studies have classified the transfer zone in la...Structural transfer zones in a half-graben rift basin play a significant role in controlling sandy sediments and providing a target for hydrocarbon exploration. Previous studies have classified the transfer zone in lacustrine environments into two different patterns: synthetic approaching transfer zones and synthetic overlapping transfer zones. However, the evolution of the depositional pattern and the controlling factors of the above transfer zones are still unclear. In the Fushan Sag, the northern South China Sea, an overlapping transfer zone developed in the early Eocene Epoch, while a synthetic approaching transfer zone developed in the late Eocene, due to tectonic uplift. This evolutionary process provided an opportunity to study the stacking pattern of strata architectural variability and facies distribution in the structural transfer zone of the Eocene lacustrine basin. In this study, following the indications of the oriented sedimentary structures in core samples and heavy mineral assemblages of 18 wells, the evolution of the paleo-hydrodynamic distribution during the early and late Eocene has been reconstructed. The sequence-stratigraphy was then divided and the sand body parameters calculated, according to the seismic data and well log interpretations. During the early Eocene, the lake level was at a low stand, the faults broken displacement in the East block being over 50 m. The prograding delta and turbidites are oriented perpendicular to the structural transfer zone. According to the quantitative analysis of the flow rate and the depositional parameters, we speculate that gravity transportation of the sediment and the sediment-supply are the dominating factors during this period. Up to the late Eocene, the rising lake level and the decreased fault displacement leads the flow to divert to a NE-direction, resulting in it being parallel to the axis of the transfer zone. Thus, we speculate that the accommodation space is predominant in this period. In comparison with the above two periods, a braided river delta with an isolated sand body and turbidites developing in the deep area is prominent in the overlapping transfer zone, while a meandering river delta is characteristic of the synthetic approaching transfer zone.展开更多
Researches on ultra-high performance concrete (UHPC) have been conducted worldwide owing to its outstanding durability and strength performances. The exploitation of the mechanical properties of UHPC will render it po...Researches on ultra-high performance concrete (UHPC) have been conducted worldwide owing to its outstanding durability and strength performances. The exploitation of the mechanical properties of UHPC will render it possible to achieve economic design through substantial reduction in the cross sectional dimensions and simplification in the reinforcement arrangement. This paper investigates experimentally the load transfer in the prestressed concrete anchorage zone. To provide distinctive features of UHPC compared to ordinary concrete, the cross sectional dimensions of the member were reduced and the stress distribution, deformation and cracking pattern of the PS anchorage zone were examined experimentally according to the degree of reinforcement of the members chosen. The distributions of the bursting stress, spalling stress and longitudinal edge stress in the specimens were observed according to the various types of reinforcement. All the specimens satisfied the load-bearing capacity criterion specified by the European ETAG-013 guidelines and their stress distributions were similar to those in the PS anchorages of post-tensioned members applying ordinary concrete. The cracks propagated longitudinally with lengths up to twice the cross sectional dimensions and their width was smaller than when applying ordinary concrete owing to the bridging effect of the steel fibers in UHPC. Accordingly, the exploitation of the high strength of UHPC enabled us to secure the resistance of the anchorage with no need for particular reinforcing devices.展开更多
Results of long-term explorations in the Kongqueting region,located in an East China Sea depression,suggest that the strong fault activity during the sedimentary period of the Pinghu formation significantly influenced...Results of long-term explorations in the Kongqueting region,located in an East China Sea depression,suggest that the strong fault activity during the sedimentary period of the Pinghu formation significantly influenced the development of the sedimentary system.However,the aggregation and enrichment of the sand body under a tectonic background has become a problem that requires an immediate solution.Considering research outcomes of previous studies,this study used three-dimensional seismic and logging data to identify Y-or H-type and the en echelon distribution patterns of the fault plane,as well as identify the locations wherein the fault growth index value is greater than 1 in the study region,indicating the tectonic background of the fault transfer zone in the region.Second,the development type of the fault transfer zone was studied,and the sand body enrichment site was identified based on seismic inversion data and the development position of the fault transfer point.This helps clarify the evolution of sedimentary facies of the Pinghu formation combined with the sedimentary environment of the braided-river delta.Finally,after summarizing the coupling relationship between the synsedimentary fault systems and the sand body enrichment patterns,three sand-control models were determined,namely,the flexural-parallel,the en echelon collinear,and the torsional-reformed superimposed transfer zones.The findings of this study lay a foundation for the subsequent search of tectonic lithologic oil and gas reservoirs.展开更多
In recent years,with high-speed development of economy and society,and fast propulsion of industrialization and urbanization process in the development zone,average annual land demand in the development zone also quic...In recent years,with high-speed development of economy and society,and fast propulsion of industrialization and urbanization process in the development zone,average annual land demand in the development zone also quickly enlarges,and the contradiction between high-speed growth of economy and shortage of land resources is apparent increasingly. Meanwhile,to guarantee crop safety and stick to 0. 12 billion hm2of farmland red line as a rigid constraint which could not be exceeded,the supply-demand contradiction of industrial land is more and more prominent. With industrial land scale continues to enlarge,land resources become more and more scarce,but there exists the phenomenon of low-efficiency land use and even idle. For land use characteristics of the development zone,taking Hefei City Economic and Technological Development Zone as an example,the countermeasures of perfecting industrial land transfer mechanism in the development zone are proposed.展开更多
The oblique transfer zone in the Fushan Sag, a syndepositional dome sandwiched between the Bailian and Huangtong sub-sags, has been the most important exploration target. The major oil observation occurs in the E_2l_1...The oblique transfer zone in the Fushan Sag, a syndepositional dome sandwiched between the Bailian and Huangtong sub-sags, has been the most important exploration target. The major oil observation occurs in the E_2l_1^(L+M) and the E_2l_3~U. 46 oil and rock samples reveal that the oil in the transfer zone is mostly contributed by the Bailian sub-sag, though the source rock conditions, hydrocarbon generation and expulsion histories of the Bailian and Huangtong sub-sags are similar. The E_2l_3~U oil, characterized by high maturity, Pr/Ph ratio and oleanane/C_(30)-hopane ratio, shows a close genetic affinity with the E_2l_3~b source rocks, while the E_2l_1^(L+M) oil, characterized by lower maturity, Pr/Ph ratio and oleanane/C_(30)-hopane ratio, is suggested to be derived from the E_2l_(1+2)~b source rocks. The homogenization temperatures of aqueous fluid inclusions, taking the burial history of the reservoirs into account, reflect that the oil charge mainly occurred from mid-Miocene to Pliocene in the oblique transfer zone. The oil transporting passages include connected sand bodies, unconformities and faults in the Fushan Sag. Of these, the faults are the most complicated and significant. The faults differ sharply in the west area, the east area and the oblique transfer zone, resulting in different influence on the oil migration and accumulation. During the main hydrocarbon charge stage, the faults in the west area are characterized by bad vertical sealing and spatially dense distribution. As a result, the oil generated by the Huangtong source rocks is mostly lost along the faults during the vertical migration in the west area. This can be the mechanism proposed to explain the little contribution of the Huangtong source rocks to the oil in the oblique transfer zone. Eventually, an oil migration and accumulation model is built in the oblique transfer zone, which may provide theoretical and practical guides for the oil exploration.展开更多
The paper was to evaluate the efficient seasons for embryo transfer of cattle in different climatic zones in China. Three climatic zones(mid-temperate zone,warm temperate zone,subtropical zone) were designed,and embry...The paper was to evaluate the efficient seasons for embryo transfer of cattle in different climatic zones in China. Three climatic zones(mid-temperate zone,warm temperate zone,subtropical zone) were designed,and embryo transfers had been carried out in spring,summer,autumn and winter from 2009 to 2011,respectively. The total number of transplant recipient cattle was 22 208. The results showed that the best seasons for embryo transfers varied with different climatic zones. In mid-temperate zone,summer and autumn were better while summer was the best,and the rate of pregnant was 50. 67%(the number of pregnant cattle was 8 005). In warm temperate zone,spring and autumn were better while autumn was the best,and the rate of pregnant was 54. 99 %(the number of pregnant cattle was 551). In subtropical zone,spring and winter were better while winter was the best,and the rate of pregnant was 56. 94 %(the number of pregnant cattle was 328). The seasonal average temperatures and relative humidity of the best seasons in different climatic zones were concentrated on the same region. In mid-temperate zone,the mean temperature ranged between 22. 4 ℃ and 24. 2 ℃,and the mean relative humidity ranged from 44% to 55. 3%. In warm zone,the mean temperature ranges were between 14. 2 ℃ and 16. 2 ℃,and the mean relative humidity ranges were from 59. 3% to 71. 6%. In sub-tropical zone,the mean temperature ranges were between 3. 26 ℃ and 7. 73 ℃,and the mean relative humidity ranges were from 72% to 80. 6%. Therefore,the optimized conditions of temperature and humidity of season in different zones could be simulated. It is possible that we apply the program to bovine production in the similar agroecological zones,which is of great significance for improving the embryo transfer efficiency of livestock in production.展开更多
Due to its rapid movement, preferential flow (PF) in the vadose zone allows much faster contaminant transport, which may have a significant impact on ground-water quality. PF can occur in heterogeneous vadose zones an...Due to its rapid movement, preferential flow (PF) in the vadose zone allows much faster contaminant transport, which may have a significant impact on ground-water quality. PF can occur in heterogeneous vadose zones and it strongly depends on hydric and hydraulic conditions like entering flow rates at surface. This study deals with the modeling of the establishment of PF, and related solute transfer during the infiltration phase in a strongly heterogeneous glaciofluvial deposit. This deposit is made of four contrasting lithofacies (sand, gravel, bimodal gravel and matrix-free gravel) and lies underneath an urban infiltration basin (Lyon, France). Previous studies have been carried out on this site and linked the regionalization of soil pollution with the lithological heterogeneity. But none of them clearly demonstrated how heterogeneity could impact flow and solute transfer and may explain such a regionalization. In this study, we model flow and solute transfer at the trench scale for both uniform and heterogeneous profiles in order to characterize the effect of lithological heterogeneity. In addition, such a modeling was performed for two different entering flow rates to depict the influence of condition at surface on PF. A key result is that heterogeneity clearly impacts unsaturated flow and solute transfer. Numerical modeling permitted pointing out the existence of PF paths associated with the sedimentary heterogeneity of the glaciofluvial deposit. For lower surface fluxes, the sand lens and matrix-free gravel were the sources of capillary barrier effects, leading to a funneled flow and a groundwater recharge characterized by earlier and more dispersed wetting fronts. Such a flow pattern enhances solutes transfer and reduces solute retention by soil. Thus, the effect of heterogeneity on solute transfer is significant, especially for the most reactive solutes.展开更多
A transfer zone in rift basins preserves important information on regional tectonic evolution and plays significant roles in hydrocarbon accumulation.Based on the systematic analysis of 3D seismic data and hydrocarbon...A transfer zone in rift basins preserves important information on regional tectonic evolution and plays significant roles in hydrocarbon accumulation.Based on the systematic analysis of 3D seismic data and hydrocarbon accumulation conditions,the geometry,kinematics,and reservoir control of a large synthetic overlapping transfer zone in the south of the Wenchang A subsag in the Zhujiang(Pearl)River Mouth basin were investigated.Results indicate that the development and evolution of the transfer zone was controlled by the interaction between pre-existing faults and regional stress transformation.The intense rifting of the main faults of the transfer zone controlled the development of source rocks and faultcontrolled slope break paleogeomorphology.The strike-slip overprint since the Oligocene is conducive to the formation of a large-scale fault-anticline trap,and the secondary faults in the transfer zone contribute to the hydrocarbon transportation.The conjugate intersection area of the NE-and NW-trending faults offers more opportunity for hydrocarbon migration and accumulation.展开更多
Transfer zones are structural areas of faults interactions where fault motion or displacement can be transferred from one fault to another, regional strain maintains laterally constant. Transfer zones are widely devel...Transfer zones are structural areas of faults interactions where fault motion or displacement can be transferred from one fault to another, regional strain maintains laterally constant. Transfer zones are widely developed in rift basins and have significance on hydrocarbon accumulation. In this review article, we attempt to summarize recent advances on the types, distance-displacement curves, evolutionary stages and controlling factors of transfer zones in rift basins and their effects on sedimentary systems, reservoir properties, trap formation and hydrocarbon migration. The formation of transfer zones is genetically related to the segmented growth of normal faults. Depending on the degree of interaction between these normal faults, transfer zones in rift basins could be divided into two types: soft-linked and hard-linked, which are further subdivided into transfer slope, oblique anticline, horst and transfer fault based on the combination patterns of normal faults. In general, the development of transfer zones experiences several stages including isolated normal faulting, transfer slope forming, complicating and breaking. During the interaction and growth of segmented normal faults, stress-strain and spatial array of faults, pre-existing basement structures, and mechanical conditions of rocks have a great influence on the location and development processes of transfer zones. A transfer zone is commonly considered as a pathway for conveying sediments from provenance to basin, and it hence exerts an essential control on the distribution of sandbodies. In addition, transfer zone is the area where stresses are concentrated, which facilitates the formation of various types of structural traps, and it is also a favorable conduit for hydrocarbon migration. Consequently, there exists great hydrocarbon potentials in transfer zones to which more attention should be given.展开更多
The temperature prediction of the Clamp-conductor coupling zone plays a crucial role in ensuring the safe and stable operation of overhead transmission lines and optimizing the thermal stability margin of transmission...The temperature prediction of the Clamp-conductor coupling zone plays a crucial role in ensuring the safe and stable operation of overhead transmission lines and optimizing the thermal stability margin of transmission lines.While existing research in this field has thoroughly explored temperature rise prediction,the focus has been relatively narrow,either targeting conductors exclusively or focusing solely on clamps,with little attention given to the temperature rise in the conductor-clampcoupling zoneor the influenceof clamp temperatureonconductor temperature rise.Based on this,considering axial heat transfer between the clamp and the conductor,this study develops a thermal model to calculate temperature in the clamp-conductor interface zone.A Whale Optimization Algorithm(WOA)-based parameter identification method is employed to overcome challenges in determining model parameters.To validate model performance,a current-carrying temperature-rise experimental platform was designed to supply data for both model verification and parameter identification.By comparing the calculation results with the experimental data,the results show that the maximum average error does not exceed 1.4%,and the maximum error is only 2.79%,verifying the validity of the parameter identificationmethod and thermalmodel.Thiswork lays a theoretical foundation for predicting temperature distributions at clamp-conductor interfaces under realistic meteorological conditions and supports short-termdynamic capacity increases for overhead conductors,demonstrating significant practical relevance.展开更多
The nucleation can be enhanced by decreasing the superheat of molten steel, thus reducing temperature gradient on the solidification front can retard the growth of columnar crystals and enlarge the equiaxed zone in co...The nucleation can be enhanced by decreasing the superheat of molten steel, thus reducing temperature gradient on the solidification front can retard the growth of columnar crystals and enlarge the equiaxed zone in continuous casting strand. The billets with equiaxed zone more than 90% were cast with a combined mould and the heat flux was measured. The heat transfer of the combined mould and traditional mould was compared. The resuits show that under same casting conditions, the temperature gradient on the solidification front in the combined mould is smaller than that in traditional mould at a distance within 0-150 mm from the meniscus.展开更多
In this work, the morphologies of weld of 7075-T6 aluminum alloy via friction stir welding （FSW） were analyzed by optical microscopy, the temperature field was attained by numerical simulation, and the effect of tem...In this work, the morphologies of weld of 7075-T6 aluminum alloy via friction stir welding （FSW） were analyzed by optical microscopy, the temperature field was attained by numerical simulation, and the effect of temperature on material transfer behavior in the thermal-mechanical affected zone （TMAZ） at different stages was mainly investigated. The FSW process consists of three stages. It is very interesting to find that the maximum transfer displacement of material appears at the final stage of welding process, then at the stable stage and at the initial stage, which results from the difference of peak temperatures at different stages. At any stage, the material in TMAZ near the surface of weld transfers downwards, the material in the middle of weld moves upwards and the material near the bottom of weld hardly moves. In any cross section of weld, the largest transfer displacement of material appears in the middle of weld. The increase of rotational velocity and the decrease of welding speed are both beneficial to the transfer displacement of material in the middle of weld.展开更多
The influence of quench transfer time on the microstructure and mechanical properties of 7055 aluminum alloy with and without zirconium was investigated by tensile properties test,optical microscopy,scanning electron ...The influence of quench transfer time on the microstructure and mechanical properties of 7055 aluminum alloy with and without zirconium was investigated by tensile properties test,optical microscopy,scanning electron microscopy and transmission electron microscopy.For the Zr-free alloy,the strength increases to the highest value at 20 s with transfer time,and then decreases slightly.The elongation decreases slowly with transfer time within 20 s,and more rapidly after 20 s.For the Zr-containing alloy,prolonging transfer time within 20 s results in slight decrease in the strength and elongation,and rapid drop of which is observed after 20 s.For the Zr-free alloy,prolonging transfer time can increase the percentage of intergranular fracture,which is mainly caused by wide grain boundary precipitate free zone.The failure mode of the Zr-containing alloy is modified from the predominant transgranular void growth and intergranular fracture to transgranular shear and intergranular fracture with increase in the transfer time,which is attributed to the wider grain boundary precipitate free zone and coarse equilibrium η phases in the matrix.展开更多
On the process of power system black start after an accident, it can help to optimize the resources allocation and accelerate the recovery process that decomposing the power system into several independent partitions ...On the process of power system black start after an accident, it can help to optimize the resources allocation and accelerate the recovery process that decomposing the power system into several independent partitions for parallel recovery. On the basis of adequate consideration of fuzziness of black-start zone partitioning, a new algorithm based on fuzzy clustering analysis is presented. Characteristic indexes are extracted fully and accurately. The raw data matrix is made up of the electrical distance between every nodes and blackstart resources. Closure transfer method is utilized to get the dynamic clustering. The availability and feasibility of the proposed algorithm are verified on the New-England 39 bus system at last.展开更多
The cooling of a(pebble bed)spent fuel in a high-temperature gas-cooled reactor(HTGR)is adversely affected by an increase in the temperature of the used gas(air).To investigate this problem,a configuration consisting ...The cooling of a(pebble bed)spent fuel in a high-temperature gas-cooled reactor(HTGR)is adversely affected by an increase in the temperature of the used gas(air).To investigate this problem,a configuration consisting of three copper spheres arranged in tandem subjected to a forced mistflow inside a cylindrical channel is considered.The heat transfer coefficients and related variations as a function of Reynolds number are investigated accord-ingly.The experimental results show that when compared to those with only airflow,the heat transfer coefficient of the spherical elements with mistflow(j=112 kg/m2 hr,Re=55000)increases by 180%,75%,and 20%,respec-tively for thefirst,second,and third spherical element(the corresponding heat transfer enhancement ratio being 2.3,1.4,and 1.1).Additional numerical simulations reveal that the presence of stagnant zones with intense vortex formation around each spherical element contributes significantly to determine the heat transfer behavior.展开更多
The two-phase zone continuous casting(TZCC)technique was used to continuously cast high-strength aluminum alloy hollow billets,and a verified 3D model of TZCC was used to simulate the flow and temperature fields at ca...The two-phase zone continuous casting(TZCC)technique was used to continuously cast high-strength aluminum alloy hollow billets,and a verified 3D model of TZCC was used to simulate the flow and temperature fields at casting speeds of 2-6 mm·min^(-1).Hollow billets under the same conditions were prepared,and their macro/microstructures were analyzed by an optical microscope and a scanning electron microscope.During the TZCC process,a circular fluid flow appears in front of the mushy zone,and the induction heated stepped mold and convective heat transfer result in a curved solidification front with depressed region near the inner wall and a vertical temperature gradient.The deflection of the solidification front decreases and the average cooling rate in the mushy zone increases with increasing casting speed.Experimental results for a 2D12 alloy show that hot tearing periodically appears in the hollow billet accompanied by macrosegregation near the inner wall at casting speeds of 2 and 4 mm·min^(-1),while macroscopic defects of hot tearing and macrosegregation weaken and the average size of columnar crystals in the hollow billets decreases with further increasing casting speed.2D12 aluminum alloy hollow billets with no macroscopic defects,the finest columnar crystals,and excellent mechanical properties were prepared by TZCC at a casting speed of 6 mm·min^(-1),which is beneficial for the further plastic forming process.展开更多
基金sponsored by the National Natural Science Foundation of China(No.41572080)the Major State Science and Technology Research Program(No.2016ZX05024002-002)China Scholarship Council(CSC)(No.201906400071)。
文摘Structural transfer zones in a half-graben rift basin play a significant role in controlling sandy sediments and providing a target for hydrocarbon exploration. Previous studies have classified the transfer zone in lacustrine environments into two different patterns: synthetic approaching transfer zones and synthetic overlapping transfer zones. However, the evolution of the depositional pattern and the controlling factors of the above transfer zones are still unclear. In the Fushan Sag, the northern South China Sea, an overlapping transfer zone developed in the early Eocene Epoch, while a synthetic approaching transfer zone developed in the late Eocene, due to tectonic uplift. This evolutionary process provided an opportunity to study the stacking pattern of strata architectural variability and facies distribution in the structural transfer zone of the Eocene lacustrine basin. In this study, following the indications of the oriented sedimentary structures in core samples and heavy mineral assemblages of 18 wells, the evolution of the paleo-hydrodynamic distribution during the early and late Eocene has been reconstructed. The sequence-stratigraphy was then divided and the sand body parameters calculated, according to the seismic data and well log interpretations. During the early Eocene, the lake level was at a low stand, the faults broken displacement in the East block being over 50 m. The prograding delta and turbidites are oriented perpendicular to the structural transfer zone. According to the quantitative analysis of the flow rate and the depositional parameters, we speculate that gravity transportation of the sediment and the sediment-supply are the dominating factors during this period. Up to the late Eocene, the rising lake level and the decreased fault displacement leads the flow to divert to a NE-direction, resulting in it being parallel to the axis of the transfer zone. Thus, we speculate that the accommodation space is predominant in this period. In comparison with the above two periods, a braided river delta with an isolated sand body and turbidites developing in the deep area is prominent in the overlapping transfer zone, while a meandering river delta is characteristic of the synthetic approaching transfer zone.
文摘Researches on ultra-high performance concrete (UHPC) have been conducted worldwide owing to its outstanding durability and strength performances. The exploitation of the mechanical properties of UHPC will render it possible to achieve economic design through substantial reduction in the cross sectional dimensions and simplification in the reinforcement arrangement. This paper investigates experimentally the load transfer in the prestressed concrete anchorage zone. To provide distinctive features of UHPC compared to ordinary concrete, the cross sectional dimensions of the member were reduced and the stress distribution, deformation and cracking pattern of the PS anchorage zone were examined experimentally according to the degree of reinforcement of the members chosen. The distributions of the bursting stress, spalling stress and longitudinal edge stress in the specimens were observed according to the various types of reinforcement. All the specimens satisfied the load-bearing capacity criterion specified by the European ETAG-013 guidelines and their stress distributions were similar to those in the PS anchorages of post-tensioned members applying ordinary concrete. The cracks propagated longitudinally with lengths up to twice the cross sectional dimensions and their width was smaller than when applying ordinary concrete owing to the bridging effect of the steel fibers in UHPC. Accordingly, the exploitation of the high strength of UHPC enabled us to secure the resistance of the anchorage with no need for particular reinforcing devices.
基金This work was supported by the National Science and Technology Major Project of China(No.2016ZX05027002-009)the Science and Technology Project of the CNOOC,known as the‘Research on Key Technologies of Exploration and Development in Western Xihu Sag’(No.CNOOC-KJ 135 ZDXM 39 SH01).
文摘Results of long-term explorations in the Kongqueting region,located in an East China Sea depression,suggest that the strong fault activity during the sedimentary period of the Pinghu formation significantly influenced the development of the sedimentary system.However,the aggregation and enrichment of the sand body under a tectonic background has become a problem that requires an immediate solution.Considering research outcomes of previous studies,this study used three-dimensional seismic and logging data to identify Y-or H-type and the en echelon distribution patterns of the fault plane,as well as identify the locations wherein the fault growth index value is greater than 1 in the study region,indicating the tectonic background of the fault transfer zone in the region.Second,the development type of the fault transfer zone was studied,and the sand body enrichment site was identified based on seismic inversion data and the development position of the fault transfer point.This helps clarify the evolution of sedimentary facies of the Pinghu formation combined with the sedimentary environment of the braided-river delta.Finally,after summarizing the coupling relationship between the synsedimentary fault systems and the sand body enrichment patterns,three sand-control models were determined,namely,the flexural-parallel,the en echelon collinear,and the torsional-reformed superimposed transfer zones.The findings of this study lay a foundation for the subsequent search of tectonic lithologic oil and gas reservoirs.
文摘In recent years,with high-speed development of economy and society,and fast propulsion of industrialization and urbanization process in the development zone,average annual land demand in the development zone also quickly enlarges,and the contradiction between high-speed growth of economy and shortage of land resources is apparent increasingly. Meanwhile,to guarantee crop safety and stick to 0. 12 billion hm2of farmland red line as a rigid constraint which could not be exceeded,the supply-demand contradiction of industrial land is more and more prominent. With industrial land scale continues to enlarge,land resources become more and more scarce,but there exists the phenomenon of low-efficiency land use and even idle. For land use characteristics of the development zone,taking Hefei City Economic and Technological Development Zone as an example,the countermeasures of perfecting industrial land transfer mechanism in the development zone are proposed.
基金Project(41272122)supported by the National Natural Science Foundation of China
文摘The oblique transfer zone in the Fushan Sag, a syndepositional dome sandwiched between the Bailian and Huangtong sub-sags, has been the most important exploration target. The major oil observation occurs in the E_2l_1^(L+M) and the E_2l_3~U. 46 oil and rock samples reveal that the oil in the transfer zone is mostly contributed by the Bailian sub-sag, though the source rock conditions, hydrocarbon generation and expulsion histories of the Bailian and Huangtong sub-sags are similar. The E_2l_3~U oil, characterized by high maturity, Pr/Ph ratio and oleanane/C_(30)-hopane ratio, shows a close genetic affinity with the E_2l_3~b source rocks, while the E_2l_1^(L+M) oil, characterized by lower maturity, Pr/Ph ratio and oleanane/C_(30)-hopane ratio, is suggested to be derived from the E_2l_(1+2)~b source rocks. The homogenization temperatures of aqueous fluid inclusions, taking the burial history of the reservoirs into account, reflect that the oil charge mainly occurred from mid-Miocene to Pliocene in the oblique transfer zone. The oil transporting passages include connected sand bodies, unconformities and faults in the Fushan Sag. Of these, the faults are the most complicated and significant. The faults differ sharply in the west area, the east area and the oblique transfer zone, resulting in different influence on the oil migration and accumulation. During the main hydrocarbon charge stage, the faults in the west area are characterized by bad vertical sealing and spatially dense distribution. As a result, the oil generated by the Huangtong source rocks is mostly lost along the faults during the vertical migration in the west area. This can be the mechanism proposed to explain the little contribution of the Huangtong source rocks to the oil in the oblique transfer zone. Eventually, an oil migration and accumulation model is built in the oblique transfer zone, which may provide theoretical and practical guides for the oil exploration.
文摘The paper was to evaluate the efficient seasons for embryo transfer of cattle in different climatic zones in China. Three climatic zones(mid-temperate zone,warm temperate zone,subtropical zone) were designed,and embryo transfers had been carried out in spring,summer,autumn and winter from 2009 to 2011,respectively. The total number of transplant recipient cattle was 22 208. The results showed that the best seasons for embryo transfers varied with different climatic zones. In mid-temperate zone,summer and autumn were better while summer was the best,and the rate of pregnant was 50. 67%(the number of pregnant cattle was 8 005). In warm temperate zone,spring and autumn were better while autumn was the best,and the rate of pregnant was 54. 99 %(the number of pregnant cattle was 551). In subtropical zone,spring and winter were better while winter was the best,and the rate of pregnant was 56. 94 %(the number of pregnant cattle was 328). The seasonal average temperatures and relative humidity of the best seasons in different climatic zones were concentrated on the same region. In mid-temperate zone,the mean temperature ranged between 22. 4 ℃ and 24. 2 ℃,and the mean relative humidity ranged from 44% to 55. 3%. In warm zone,the mean temperature ranges were between 14. 2 ℃ and 16. 2 ℃,and the mean relative humidity ranges were from 59. 3% to 71. 6%. In sub-tropical zone,the mean temperature ranges were between 3. 26 ℃ and 7. 73 ℃,and the mean relative humidity ranges were from 72% to 80. 6%. Therefore,the optimized conditions of temperature and humidity of season in different zones could be simulated. It is possible that we apply the program to bovine production in the similar agroecological zones,which is of great significance for improving the embryo transfer efficiency of livestock in production.
文摘Due to its rapid movement, preferential flow (PF) in the vadose zone allows much faster contaminant transport, which may have a significant impact on ground-water quality. PF can occur in heterogeneous vadose zones and it strongly depends on hydric and hydraulic conditions like entering flow rates at surface. This study deals with the modeling of the establishment of PF, and related solute transfer during the infiltration phase in a strongly heterogeneous glaciofluvial deposit. This deposit is made of four contrasting lithofacies (sand, gravel, bimodal gravel and matrix-free gravel) and lies underneath an urban infiltration basin (Lyon, France). Previous studies have been carried out on this site and linked the regionalization of soil pollution with the lithological heterogeneity. But none of them clearly demonstrated how heterogeneity could impact flow and solute transfer and may explain such a regionalization. In this study, we model flow and solute transfer at the trench scale for both uniform and heterogeneous profiles in order to characterize the effect of lithological heterogeneity. In addition, such a modeling was performed for two different entering flow rates to depict the influence of condition at surface on PF. A key result is that heterogeneity clearly impacts unsaturated flow and solute transfer. Numerical modeling permitted pointing out the existence of PF paths associated with the sedimentary heterogeneity of the glaciofluvial deposit. For lower surface fluxes, the sand lens and matrix-free gravel were the sources of capillary barrier effects, leading to a funneled flow and a groundwater recharge characterized by earlier and more dispersed wetting fronts. Such a flow pattern enhances solutes transfer and reduces solute retention by soil. Thus, the effect of heterogeneity on solute transfer is significant, especially for the most reactive solutes.
基金Supported by the National Natural Science Foundation of China(Nos.42302155,42072169,42072235)the Natural Science Foundation of Shandong Province(No.ZR2023QD016)+2 种基金the China Postdoctoral Science Foundation(No.2022M713461)the Qingdao Postdoctoral Application Research Funds(No.QDBSH20220202067)the Fundamental Research Funds for the Central Universities(No.22CX06005A)。
文摘A transfer zone in rift basins preserves important information on regional tectonic evolution and plays significant roles in hydrocarbon accumulation.Based on the systematic analysis of 3D seismic data and hydrocarbon accumulation conditions,the geometry,kinematics,and reservoir control of a large synthetic overlapping transfer zone in the south of the Wenchang A subsag in the Zhujiang(Pearl)River Mouth basin were investigated.Results indicate that the development and evolution of the transfer zone was controlled by the interaction between pre-existing faults and regional stress transformation.The intense rifting of the main faults of the transfer zone controlled the development of source rocks and faultcontrolled slope break paleogeomorphology.The strike-slip overprint since the Oligocene is conducive to the formation of a large-scale fault-anticline trap,and the secondary faults in the transfer zone contribute to the hydrocarbon transportation.The conjugate intersection area of the NE-and NW-trending faults offers more opportunity for hydrocarbon migration and accumulation.
基金funded by the National Natural Science Foundation of China(No.42072149).
文摘Transfer zones are structural areas of faults interactions where fault motion or displacement can be transferred from one fault to another, regional strain maintains laterally constant. Transfer zones are widely developed in rift basins and have significance on hydrocarbon accumulation. In this review article, we attempt to summarize recent advances on the types, distance-displacement curves, evolutionary stages and controlling factors of transfer zones in rift basins and their effects on sedimentary systems, reservoir properties, trap formation and hydrocarbon migration. The formation of transfer zones is genetically related to the segmented growth of normal faults. Depending on the degree of interaction between these normal faults, transfer zones in rift basins could be divided into two types: soft-linked and hard-linked, which are further subdivided into transfer slope, oblique anticline, horst and transfer fault based on the combination patterns of normal faults. In general, the development of transfer zones experiences several stages including isolated normal faulting, transfer slope forming, complicating and breaking. During the interaction and growth of segmented normal faults, stress-strain and spatial array of faults, pre-existing basement structures, and mechanical conditions of rocks have a great influence on the location and development processes of transfer zones. A transfer zone is commonly considered as a pathway for conveying sediments from provenance to basin, and it hence exerts an essential control on the distribution of sandbodies. In addition, transfer zone is the area where stresses are concentrated, which facilitates the formation of various types of structural traps, and it is also a favorable conduit for hydrocarbon migration. Consequently, there exists great hydrocarbon potentials in transfer zones to which more attention should be given.
基金supported by the Technology Innovation Leading Program of Shaanxi(2024QCY-KXJ-009)the Research Plan of the EducationDepartment of Shaanxi Province(23JC028)+1 种基金supported by the National Key Laboratory of Metal Forming Technology and Heavy Equipment B2408100.W14.Key Research and Development Program of Shaanxi(2025CY-YBXM-489).
文摘The temperature prediction of the Clamp-conductor coupling zone plays a crucial role in ensuring the safe and stable operation of overhead transmission lines and optimizing the thermal stability margin of transmission lines.While existing research in this field has thoroughly explored temperature rise prediction,the focus has been relatively narrow,either targeting conductors exclusively or focusing solely on clamps,with little attention given to the temperature rise in the conductor-clampcoupling zoneor the influenceof clamp temperatureonconductor temperature rise.Based on this,considering axial heat transfer between the clamp and the conductor,this study develops a thermal model to calculate temperature in the clamp-conductor interface zone.A Whale Optimization Algorithm(WOA)-based parameter identification method is employed to overcome challenges in determining model parameters.To validate model performance,a current-carrying temperature-rise experimental platform was designed to supply data for both model verification and parameter identification.By comparing the calculation results with the experimental data,the results show that the maximum average error does not exceed 1.4%,and the maximum error is only 2.79%,verifying the validity of the parameter identificationmethod and thermalmodel.Thiswork lays a theoretical foundation for predicting temperature distributions at clamp-conductor interfaces under realistic meteorological conditions and supports short-termdynamic capacity increases for overhead conductors,demonstrating significant practical relevance.
文摘The nucleation can be enhanced by decreasing the superheat of molten steel, thus reducing temperature gradient on the solidification front can retard the growth of columnar crystals and enlarge the equiaxed zone in continuous casting strand. The billets with equiaxed zone more than 90% were cast with a combined mould and the heat flux was measured. The heat transfer of the combined mould and traditional mould was compared. The resuits show that under same casting conditions, the temperature gradient on the solidification front in the combined mould is smaller than that in traditional mould at a distance within 0-150 mm from the meniscus.
基金the National Natural Science Foundation of China (No.51204111)the Education Department Foundation of Liaoning Province (No.L2012047)the State Key Lab of Advanced Welding and Joining in Harbin Institute of Technology (AWJ-M13-07)
文摘In this work, the morphologies of weld of 7075-T6 aluminum alloy via friction stir welding （FSW） were analyzed by optical microscopy, the temperature field was attained by numerical simulation, and the effect of temperature on material transfer behavior in the thermal-mechanical affected zone （TMAZ） at different stages was mainly investigated. The FSW process consists of three stages. It is very interesting to find that the maximum transfer displacement of material appears at the final stage of welding process, then at the stable stage and at the initial stage, which results from the difference of peak temperatures at different stages. At any stage, the material in TMAZ near the surface of weld transfers downwards, the material in the middle of weld moves upwards and the material near the bottom of weld hardly moves. In any cross section of weld, the largest transfer displacement of material appears in the middle of weld. The increase of rotational velocity and the decrease of welding speed are both beneficial to the transfer displacement of material in the middle of weld.
基金Project(2005CB623706) supported by the Major State Basic Research Development Program of ChinaProject(50230310) supported by the National Natural Science Foundation of China
文摘The influence of quench transfer time on the microstructure and mechanical properties of 7055 aluminum alloy with and without zirconium was investigated by tensile properties test,optical microscopy,scanning electron microscopy and transmission electron microscopy.For the Zr-free alloy,the strength increases to the highest value at 20 s with transfer time,and then decreases slightly.The elongation decreases slowly with transfer time within 20 s,and more rapidly after 20 s.For the Zr-containing alloy,prolonging transfer time within 20 s results in slight decrease in the strength and elongation,and rapid drop of which is observed after 20 s.For the Zr-free alloy,prolonging transfer time can increase the percentage of intergranular fracture,which is mainly caused by wide grain boundary precipitate free zone.The failure mode of the Zr-containing alloy is modified from the predominant transgranular void growth and intergranular fracture to transgranular shear and intergranular fracture with increase in the transfer time,which is attributed to the wider grain boundary precipitate free zone and coarse equilibrium η phases in the matrix.
文摘On the process of power system black start after an accident, it can help to optimize the resources allocation and accelerate the recovery process that decomposing the power system into several independent partitions for parallel recovery. On the basis of adequate consideration of fuzziness of black-start zone partitioning, a new algorithm based on fuzzy clustering analysis is presented. Characteristic indexes are extracted fully and accurately. The raw data matrix is made up of the electrical distance between every nodes and blackstart resources. Closure transfer method is utilized to get the dynamic clustering. The availability and feasibility of the proposed algorithm are verified on the New-England 39 bus system at last.
文摘The cooling of a(pebble bed)spent fuel in a high-temperature gas-cooled reactor(HTGR)is adversely affected by an increase in the temperature of the used gas(air).To investigate this problem,a configuration consisting of three copper spheres arranged in tandem subjected to a forced mistflow inside a cylindrical channel is considered.The heat transfer coefficients and related variations as a function of Reynolds number are investigated accord-ingly.The experimental results show that when compared to those with only airflow,the heat transfer coefficient of the spherical elements with mistflow(j=112 kg/m2 hr,Re=55000)increases by 180%,75%,and 20%,respec-tively for thefirst,second,and third spherical element(the corresponding heat transfer enhancement ratio being 2.3,1.4,and 1.1).Additional numerical simulations reveal that the presence of stagnant zones with intense vortex formation around each spherical element contributes significantly to determine the heat transfer behavior.
基金the National Natural Science Foundation of China(No.U1703131,No.51674027,No.51974027 and No.52004028)Guangdong Basic and Applied Basic Research Foundation(2019A1515111126)the Fundamental Research Funds for the Central Universities(FRF-TP-18-005C1 and FRF-TP-18-041A1).
文摘The two-phase zone continuous casting(TZCC)technique was used to continuously cast high-strength aluminum alloy hollow billets,and a verified 3D model of TZCC was used to simulate the flow and temperature fields at casting speeds of 2-6 mm·min^(-1).Hollow billets under the same conditions were prepared,and their macro/microstructures were analyzed by an optical microscope and a scanning electron microscope.During the TZCC process,a circular fluid flow appears in front of the mushy zone,and the induction heated stepped mold and convective heat transfer result in a curved solidification front with depressed region near the inner wall and a vertical temperature gradient.The deflection of the solidification front decreases and the average cooling rate in the mushy zone increases with increasing casting speed.Experimental results for a 2D12 alloy show that hot tearing periodically appears in the hollow billet accompanied by macrosegregation near the inner wall at casting speeds of 2 and 4 mm·min^(-1),while macroscopic defects of hot tearing and macrosegregation weaken and the average size of columnar crystals in the hollow billets decreases with further increasing casting speed.2D12 aluminum alloy hollow billets with no macroscopic defects,the finest columnar crystals,and excellent mechanical properties were prepared by TZCC at a casting speed of 6 mm·min^(-1),which is beneficial for the further plastic forming process.
