Knowing the optimal operating parameters of Stirling engines is important for efficient combustion through adaptability to changed pressures and oxygen atmospheres. In this study, the optimum operating conditions for ...Knowing the optimal operating parameters of Stirling engines is important for efficient combustion through adaptability to changed pressures and oxygen atmospheres. In this study, the optimum operating conditions for efficient combustion in a singular Stirling engine combustor at different oxygen atmospheres were investigated and determined. Numerical simulations were performed to investigate the effects of ejection ratio and pressure on combustion performance. In an oxygen/carbon dioxide atmosphere, the results show that increasing the ejection ratio substantially alters the flame distribution in the Stirling engine combustor, increasing heat transfer and external combustion efficiency. In contrast, increasing the ejection ratio reduces the average and maximum temperatures of the Stirling engine combustor. Increased pressure affects the flame distribution in the Stirling engine combustor and impedes the flow and convective heat transfer in the combustor, reducing the overall external combustion efficiency at pressures above 6.5 MPa. In an air/carbon dioxide atmosphere, an increased ejection ratio reduces the average and maximum temperatures in the Stirling engine combustor. However, the overall flame distribution does not change substantially. The external combustion efficiency tends to increase and then decrease because of two opposing factors: the increase in the convective heat transfer coefficient and the decrease in the temperature difference. Increasing pressure inhibits forced convection heat transfer in the Stirling engine combustor, reducing external combustion efficiency, which drops from 78% to 65% when pressure increases from 0.2 MPa to 0.5 MPa.展开更多
The free piston Stirling engine external combustion system was simulated to investigate the diesel-air combustion characteristics in order to demonstrate its feasibility by computational fluid dynamics(CFD). The diffe...The free piston Stirling engine external combustion system was simulated to investigate the diesel-air combustion characteristics in order to demonstrate its feasibility by computational fluid dynamics(CFD). The different effects on combustion were distinguished by analyzing the combustion burner, the injection position of diesel oil, the front tube arrangement of Stirling heater head and the back fin. The results show that the tilted front tube arrangement of the heater head with the back fin is the best practicable technology while the distance between the diesel nozzle position and the swirler top is 0. Its total heat flux is 15.6 kW, and the average heat transfer coefficients of the front and back tubes are 127 W/(m2· K) and 192 W/(m2· K), respectively. The heat transfer is mainly through convection, and the proportion of radiative heat transfer is only 16.9%. The best combustion efficiency of the free piston Stirling engine external combustion system is 86%.展开更多
It is clarified that the important method to improve the blast temperature ofthe small and the middle blast furnaces whose production is about two-thirds of total sum of Chinafrom 1000℃ to 1250-1300℃ is to preheat b...It is clarified that the important method to improve the blast temperature ofthe small and the middle blast furnaces whose production is about two-thirds of total sum of Chinafrom 1000℃ to 1250-1300℃ is to preheat both their combustion-supporting air and coal gas. The airtemperature of blast furnaces can be reached to 1250-1300℃ by burning single blast furnace coal gasif high speed burner is applied to blast furnaces and new-type external combustion swirl-flowinghot stove is used to preheat their combustion-supporting air. The computational results of the flowand heat transfer processions in the hot stove prove that the surface of the bed of the thermalstorage balls there have not eccentric flow and the flow field and temperature field distribution iseven. The computational results of the blast temperature distribution are similar to thosedetermination experiment data. The numerical results also provide references for developing anddesigning the new-type external combustion swirl-flowing hot stoves.展开更多
Thermochemical recuperation heat recovery is an advanced waste heat utilization technology that can effectively recover exhaust waste heat from oxy-fuel Stirling engines.The novel combustor of a Stirling engine with t...Thermochemical recuperation heat recovery is an advanced waste heat utilization technology that can effectively recover exhaust waste heat from oxy-fuel Stirling engines.The novel combustor of a Stirling engine with thermochemical recuperation heat recovery system is expected to utilize both reformed gas and diesel fuels as sources of combustion.In this research,the effects of various factors,including the H_(2)O addition,fuel distribution ratio(FDR),excess oxygen coefficient,and cyclone structure on the temperature distribution in the combustor,combustion emissions,and external combustion system efficiency of the Stirling engine were experimentally investigated.With the increase of steam-to-carbon ratio(S/C),the temperature difference between the upper and lower heating tubes reduces and the circumferential temperature fluctuation decreases,and the combustion of diesel and reformed gas remains close to complete combustion.At S/C=2,the external combustion efficiency is 80.6%,indicating a 1.6%decrease compared to conventional combustion.With the increase of FDR,the temperature uniformity of the heater tube is improved,and the CO and HC emissions decrease.However,the impact of the FDR on the maximum temperature difference and temperature fluctuation across the heater is insignificant.When the FDR rises from 21%to 38%,the external combustion efficiency increases from 87.4%to92.3%.The excess oxygen coefficient plays a secondary role in influencing temperature uniformity and temperature difference,and the reformed gas and diesel fuel can be burned efficiently at a low excess oxygen coefficient of 1.04.With an increase in the cyclone angle,the heater tube temperature increases,while the maximum temperature difference at the lower part decreases,and the temperature fluctuation increases.Simultaneously,the CO and HC emissions increase,and the external combustion efficiency experiences a decrease.A cyclone angle of 30°is found to be an appropriate value for achieving optimal mixing between reformed gas and diesel fuel.The research findings present valuable new insights that can be utilized to enhance the performance optimization of Stirling engines.展开更多
基金Supported by the Shanghai Rising Star Program (Grant No. 21QB1403900)the Shanghai Municipal Commission of Science and Technology (Grant No. 22170712600)。
文摘Knowing the optimal operating parameters of Stirling engines is important for efficient combustion through adaptability to changed pressures and oxygen atmospheres. In this study, the optimum operating conditions for efficient combustion in a singular Stirling engine combustor at different oxygen atmospheres were investigated and determined. Numerical simulations were performed to investigate the effects of ejection ratio and pressure on combustion performance. In an oxygen/carbon dioxide atmosphere, the results show that increasing the ejection ratio substantially alters the flame distribution in the Stirling engine combustor, increasing heat transfer and external combustion efficiency. In contrast, increasing the ejection ratio reduces the average and maximum temperatures of the Stirling engine combustor. Increased pressure affects the flame distribution in the Stirling engine combustor and impedes the flow and convective heat transfer in the combustor, reducing the overall external combustion efficiency at pressures above 6.5 MPa. In an air/carbon dioxide atmosphere, an increased ejection ratio reduces the average and maximum temperatures in the Stirling engine combustor. However, the overall flame distribution does not change substantially. The external combustion efficiency tends to increase and then decrease because of two opposing factors: the increase in the convective heat transfer coefficient and the decrease in the temperature difference. Increasing pressure inhibits forced convection heat transfer in the Stirling engine combustor, reducing external combustion efficiency, which drops from 78% to 65% when pressure increases from 0.2 MPa to 0.5 MPa.
文摘The free piston Stirling engine external combustion system was simulated to investigate the diesel-air combustion characteristics in order to demonstrate its feasibility by computational fluid dynamics(CFD). The different effects on combustion were distinguished by analyzing the combustion burner, the injection position of diesel oil, the front tube arrangement of Stirling heater head and the back fin. The results show that the tilted front tube arrangement of the heater head with the back fin is the best practicable technology while the distance between the diesel nozzle position and the swirler top is 0. Its total heat flux is 15.6 kW, and the average heat transfer coefficients of the front and back tubes are 127 W/(m2· K) and 192 W/(m2· K), respectively. The heat transfer is mainly through convection, and the proportion of radiative heat transfer is only 16.9%. The best combustion efficiency of the free piston Stirling engine external combustion system is 86%.
文摘It is clarified that the important method to improve the blast temperature ofthe small and the middle blast furnaces whose production is about two-thirds of total sum of Chinafrom 1000℃ to 1250-1300℃ is to preheat both their combustion-supporting air and coal gas. The airtemperature of blast furnaces can be reached to 1250-1300℃ by burning single blast furnace coal gasif high speed burner is applied to blast furnaces and new-type external combustion swirl-flowinghot stove is used to preheat their combustion-supporting air. The computational results of the flowand heat transfer processions in the hot stove prove that the surface of the bed of the thermalstorage balls there have not eccentric flow and the flow field and temperature field distribution iseven. The computational results of the blast temperature distribution are similar to thosedetermination experiment data. The numerical results also provide references for developing anddesigning the new-type external combustion swirl-flowing hot stoves.
基金supported by the Ministry of Science and Technology of China(Grant No.2022YFE0209000)the Shanghai Rising-Star Program(Grant No.21QB1403900)Shanghai Municipal Commission of Science and Technology(Grant No.22170712600)。
文摘Thermochemical recuperation heat recovery is an advanced waste heat utilization technology that can effectively recover exhaust waste heat from oxy-fuel Stirling engines.The novel combustor of a Stirling engine with thermochemical recuperation heat recovery system is expected to utilize both reformed gas and diesel fuels as sources of combustion.In this research,the effects of various factors,including the H_(2)O addition,fuel distribution ratio(FDR),excess oxygen coefficient,and cyclone structure on the temperature distribution in the combustor,combustion emissions,and external combustion system efficiency of the Stirling engine were experimentally investigated.With the increase of steam-to-carbon ratio(S/C),the temperature difference between the upper and lower heating tubes reduces and the circumferential temperature fluctuation decreases,and the combustion of diesel and reformed gas remains close to complete combustion.At S/C=2,the external combustion efficiency is 80.6%,indicating a 1.6%decrease compared to conventional combustion.With the increase of FDR,the temperature uniformity of the heater tube is improved,and the CO and HC emissions decrease.However,the impact of the FDR on the maximum temperature difference and temperature fluctuation across the heater is insignificant.When the FDR rises from 21%to 38%,the external combustion efficiency increases from 87.4%to92.3%.The excess oxygen coefficient plays a secondary role in influencing temperature uniformity and temperature difference,and the reformed gas and diesel fuel can be burned efficiently at a low excess oxygen coefficient of 1.04.With an increase in the cyclone angle,the heater tube temperature increases,while the maximum temperature difference at the lower part decreases,and the temperature fluctuation increases.Simultaneously,the CO and HC emissions increase,and the external combustion efficiency experiences a decrease.A cyclone angle of 30°is found to be an appropriate value for achieving optimal mixing between reformed gas and diesel fuel.The research findings present valuable new insights that can be utilized to enhance the performance optimization of Stirling engines.
