Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer ...Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.展开更多
Aromatic nitro compounds present substantial health and environmental concerns due to their toxic nature and potential explosive properties.Consequently,the development of host–vip molecular recognition systems for...Aromatic nitro compounds present substantial health and environmental concerns due to their toxic nature and potential explosive properties.Consequently,the development of host–vip molecular recognition systems for these compounds serves a dual-purpose:enabling the fabrication of high-performance sensors for detection and guiding the design of efficient adsorbents for environmental remediation.This study investigated the host–vip recognition behavior of perethylated pillar[n]arenes toward two aromatic nitro molecules,1-chloro-2,4-dinitrobenzene and picric acid.Various techniques including^(1)H NMR,2D NOESY NMR,and UV-vis spectroscopy were employed to explore the binding behavior between pillararenes and aromatic nitro vips in solution.Moreover,valuable single crystal structures were obtained to elucidate the distinct solid-state assembly behaviors of these vips with different pillararenes.The assembled solid-state supramolecular structures observed encompassed a 1:1 host–vip inclusion complex,an external binding complex,and an exo-wall tessellation complex.Furthermore,based on the findings from these systems,a pillararene-based test paper was developed for efficient picric acid detection,and the removal of picric acid from solution was also achieved using pillararenes powder.This research provides novel insights into the development of diverse host–vip systems toward hazardous compounds,offering potential applications in environmental protection and explosive detection domains.展开更多
While the moisture content of soil affects significantly the blast impulse of shallow buried explosives,the role of surface-covering water(SCW)on soil in such blast impulse remains elusive.A combined experimental and ...While the moisture content of soil affects significantly the blast impulse of shallow buried explosives,the role of surface-covering water(SCW)on soil in such blast impulse remains elusive.A combined experimental and numerical study has been carried out to characterize the effect of SCW on transferred impulse and loading magnitude of shallow buried explosives.Firstly,blast tests of shallow buried explosives were conducted,with and without the SCW,to quantitatively assess the blast loading impulse.Subsequently,finite element(FE)simulations were performed and validated against experimental measurement,with good agreement achieved.The validated FE model was then employed to predict the dynamic response of a fully-clamped metallic circular target,subjected to the explosive impact of shallow buried explosives with SCW,and explore the corresponding physical mechanisms.It was demonstrated that shallow buried explosives in saturated soil generate a greater impulse transferred towards the target relative to those in dry soil.The deformation displacement of the target plate is doubled.Increasing the height of SCW results in enhanced center peak deflection of the loaded target,accompanied by subsequent fall,due to the variation of deformation pattern of the loaded target from concentrated load to uniform load.Meanwhile,the presence of SCW increases the blast impulse transferred towards the target by three times.In addition,there exists a threshold value of the burial depth that maximizes the impact impulse.This threshold exhibits a strong sensitivity to SCW height,decreasing with increasing SCW height.An empirical formula for predicting threshold has been provided.Similar conclusions can be drawn for different explosive masses.The results provide technical guidance on blast loading intensity and its spatial distribution considering shallow buried explosives in coast-land battlefields,which can ultimately contribute to better protective designs.展开更多
Cu/Al composite plates were fabricated using rolling and underwater explosive welding techniques,separately,to compare their interfacial microstructures and mechanical performance.Interface morphology,grain orientatio...Cu/Al composite plates were fabricated using rolling and underwater explosive welding techniques,separately,to compare their interfacial microstructures and mechanical performance.Interface morphology,grain orientation,grain boundary characteristics,and phase distribution were analyzed through optical microscope,scanning electron microscope,and electron backscattered diffractometer.Mechanical properties were assessed using tensile shear tests,90°bending tests,and hardness measurements.Vickers hardness and nanoindentation test results further provided information on the hardness distributions.Results indicate that the diffusion layer in rolled Cu/Al composites is relatively fragile,while that produced by underwater explosive welding features a diffusion layer of approximately 18μm in thickness,which is metallurgically bonded through atomic diffusion.The tensile shear strength of these composites ranges from 64.45 MPa to 70.84 MPa,and in the 90°three-point bending test,the underwater-explosive-welded samples exhibit superior flexural performance.This study elucidates the effects of different manufacturing methods on the interfacial properties and mechanical performance of Cu/Al composites,offering essential insights for the selection of manufacturing methods and applications.展开更多
To further reduce the explosive thickness and to improve the bonding quality of titanium/steel composite plates,explosive welding experiments of TA1/Q235 were conducted using a low detonation velocity explosive(53#)un...To further reduce the explosive thickness and to improve the bonding quality of titanium/steel composite plates,explosive welding experiments of TA1/Q235 were conducted using a low detonation velocity explosive(53#)under the guidance of the explosive welding lower limit principle with the flyer plate thicknesses of 1,2,and 4 mm and gaps of 3,6,and 8 mm.The weldability window for titanium/steel explosive welding was calculated,and a quantitative relationship between dynamic and static process parameters was developed.Aβ-V_(p) high-speed inclined collision model was proposed,and two-dimensional numerical simulations for the explosive welding tests were performed using the smoothed particle hydrodynamics(SPH)algorithm,revealing the growth evolution mechanisms of the typical waveform morphology characteristics.Through microstructural characterization techniques,such as optical microscope,scanning electron microscope,energy dispersive spectrometer,and electron backscattered diffractometer,and mechanical property tests in terms of shear strength,bending performance,and impact toughness,the microstructure and mechanical properties of the interfaces of explosively welded TA1/Q235 composite plates were investigated.Results show that the quality of interface bonding is excellent,presenting typical waveform morphology with an average interface shear strength above 330 MPa and an average impact toughness exceeding 81 J.All samples can be bent to 180°without significant delamination or cracking defects.展开更多
High-performance pure nickel N6/steel 45#composite plate(N6/45#)was prepared using explosive welding technique.The microstructure of the interface and nearby regions was characterized and analyzed by optical microscop...High-performance pure nickel N6/steel 45#composite plate(N6/45#)was prepared using explosive welding technique.The microstructure of the interface and nearby regions was characterized and analyzed by optical microscope,scanning electron microscope,electron backscatter diffraction,and mechanical property testing,and the microstructural features and mechanical properties of the explosive welding interface were explored.The results show that along the direction of explosive welding,the pure nickel N6/steel 45#composite plate interface gradually evolves from a flat bond to a typical wavy bond.The grains at the crests and troughs exhibit high heterogeneity,and the closer to the interface,the finer the grains.Recrystallization and low-stress deformation bands are formed at the bonding interface.Nanoindentation tests reveal that plastic deformation occurs in the interfacial bonding zone,and the nanohardness values in the crest regions are higher than that in the trough regions.The tensile strength of the N6/45#interface is 599.8 MPa,with an average shear strength of 326.3 MPa.No separation phenomenon is observed between N6 and 45#after the bending test.展开更多
In order to improve the quality of loading and make the ammuni- tion safe in use,a new loading technique of ordered solidification has been studied.The study shows that the adoption of this new technique makes the cha...In order to improve the quality of loading and make the ammuni- tion safe in use,a new loading technique of ordered solidification has been studied.The study shows that the adoption of this new technique makes the charge more compact and brings about a satisfactory supplement of liquid ex- plosives,thus increasing the charge density,which is most advantageous to the crimination of pores,cavities,gaps at the bottom and in loose struc- tures.The physical mechanical properties of the charge are hence greatly im- proved,and the sensitivity of the charge to environmental stimulations is much lowered.展开更多
Detonation performance is crucial for evaluating the power of high explosives(HEs),and the equation of state(EOS)that accurately describes the high-temperature,high-pressure,and high-temperature,medium-pressure states...Detonation performance is crucial for evaluating the power of high explosives(HEs),and the equation of state(EOS)that accurately describes the high-temperature,high-pressure,and high-temperature,medium-pressure states of detonation products is key to assessing the damage efficiency of these energetic materials.This article examines the limitations of the VLW EOS in representing the thermodynamic states of explosive detonation gas products under high-temperature and medium-to high-pressure conditions.A new gas EOS for detonation products,called VHL(Virial-Han-Long),is proposed.The accuracy of VHL in describing gas states under high-temperature and medium-to high-pressure conditions is verified,and its performance in evaluating explosive detonation and working capabilities is explored.The results demonstrate that VHL exhibits high precision in calculating detonation performance.Subsequently,the detonation performance of three new HEs(ICM-101,ONC,and TNAZ)was calculated and compared to traditional HEs(TATB,CL-20,and HMX).The results indicate that ONC has superior detonation performance compared to the other explosives,while ICM-101 shows a detonation velocity similar to CL-20 but with slightly lower detonation pressure.The detonation characteristics of TNAZ are comparable to those of the standard HE HMX.From the perspective of products,considering the comprehensive work performance(mechanical work and detonation heat),both ONC and ICM-101demonstrate relatively superior performance.展开更多
Information spreading has been investigated for many years,but the mechanism of why the information explosively catches on overnight is still under debate.This explosive spreading phenomenon was usually considered dri...Information spreading has been investigated for many years,but the mechanism of why the information explosively catches on overnight is still under debate.This explosive spreading phenomenon was usually considered driven separately by social reinforcement or higher-order interactions.However,due to the limitations of empirical data and theoretical analysis,how the higher-order network structure affects the explosive information spreading under the role of social reinforcement has not been fully explored.In this work,we propose an information-spreading model by considering the social reinforcement in real and synthetic higher-order networks,describable as hypergraphs.Depending on the average group size(hyperedge cardinality)and node membership(hyperdegree),we observe two different spreading behaviors:(i)The spreading progress is not sensitive to social reinforcement,resulting in the information localized in a small part of nodes;(ii)a strong social reinforcement will promote the large-scale spread of information and induce an explosive transition.Moreover,a large average group size and membership would be beneficial to the appearance of the explosive transition.Further,we display that the heterogeneity of the node membership and group size distributions benefit the information spreading.Finally,we extend the group-based approximate master equations to verify the simulation results.Our findings may help us to comprehend the rapidly information-spreading phenomenon in modern society.展开更多
Accurate characterization of three-dimensional burning crack propagation remains pivotal yet challenging for energetic material safety,as conventional diagnostics and models inadequately resolve coupled crack-pressure...Accurate characterization of three-dimensional burning crack propagation remains pivotal yet challenging for energetic material safety,as conventional diagnostics and models inadequately resolve coupled crack-pressure dynamics in confined explosives.This study combines a novel spherical confinement system(with/without sapphire windows)with synchronized high-speed imaging and 3D reconstruction to overcome optical limitations in opaque explosives.Experimental analysis of centrally ignited HMX-based PBX-1 reveals:(1)burning cracks propagate radially with equatorial acceleration and polar deceleration,(2)systematic formation of 3–4 dominant crack branches across geometries,and(3)pressure evolution exhibiting gradual accumulation(subsurface cracking)followed by exponential growth(surface burn-through),with decay governed by cavity expansion.Building on Hill's framework,we develop a model incorporating cavity volume and fracture toughness criteria,validated against PBX explosive(95%HMX-based)experiments.The model demonstrates improved prediction of pressure trends compared to prior approaches,particularly in resolving laminar-phase accumulation and crackinduced surge transitions.Results establish structural cavity volume as a critical modulator of measured pressure and reveal direction-dependent crack kinematics as fundamental features of constrained combustion.This work provides experimentally validated insights into mechanisms of reaction pressure development and burning cracks pathways during constrained PBX explosive combustion.展开更多
Methane in situ explosion fracturing(MISEF)technology improves deep reservoir permeability by generating multiple radial fractures around the wellbore,with fracture propagation significantly influenced by in situ stre...Methane in situ explosion fracturing(MISEF)technology improves deep reservoir permeability by generating multiple radial fractures around the wellbore,with fracture propagation significantly influenced by in situ stress and bedding structures.However,limited experimental studies on the combined effects of triaxial stress and explosive loading,along with detailed characterization of explosive damage,hinder further optimization of this technology.This study introduces an experimental method to simulate MISEF under triaxial stress,using CH4-O2 detonation to generate controllable explosive loads.Bedding shale samples are fractured in a pseudo-triaxial core holder.Micro-computed tomography(μ-CT)and nuclear magnetic resonance(NMR)are used to quantify three-dimensional(3D)fracture characteristics and pore structure evolution.LS-DYNA simulations are employed to elucidate fracture propagation and dynamic behavior.The results show that detonation produces explosive loads with overpressures of 69.929-84.338 MPa and pressure rise rates of up to 555.624 MPa/ms,exhibiting an oscillation-attenuation characteristic.μ-CT reveals 3-5 radial fractures,with 3D fracture volume and surface area decreasing as triaxial stress rises.Hoop stress inhibits fracture propagation more than axial stress.NMR analysis shows that explosive loading converts bound fluid to movable fluid,while in situ stress suppresses this process.With increasing triaxial stress,micropore(T2<10 ms)changes are minimal,while meso/macropore and fracture(T2>10 ms)NMR signals decrease significantly.Higher triaxial stress reduces water overpressure of stress loading chambers and vibrational displacement at sample boundaries.Numerical simulations indicate that explosive loading generates hoop tensile stress,which drives the formation of radial fractures.Triaxial stress increases hoop compressive stress,suppressing fracture propagation.Fractures initiate along bedding planes,forming cross-shaped or T-shaped patterns.展开更多
The impact safety of explosive charges has been focused in these decades. The fragment impact is widely used to evaluate the response of explosive charges. In our work, the explosive detonation driving technique was u...The impact safety of explosive charges has been focused in these decades. The fragment impact is widely used to evaluate the response of explosive charges. In our work, the explosive detonation driving technique was used to generate a high velocity fragment with large mass. When the fragment masses are10 g, 16 g, 25 g, and 50 g, the highest velocity of fragments can reach 2400 m/s, 2100 m/s, 1900 m/s, and1400 m/s, respectively. The high velocity fragment with large mass was used to evaluate the safety of two kinds of CL-20 based explosive charges. The effects of the fragment mass and velocity were analyzed.Especially, the reaction extent was obtained based on visible phenomenon. The CL-20-based explosive charge containing Al had a higher safety level than that without Al. It was because Al had good ductility,and further improved the mechanical property of the material. Also, the numerical simulation was conducted to understand the reaction characteristics of the CL-20-based explosive charge. The results showed that as the fragment mass and velocity increased, the reaction became more violent.展开更多
The current work addresses the challenge of elucidating the performance of fluoroelastomers within the HMX(octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine)based polymer-bonded explosives(PBXs).To simulate the confine...The current work addresses the challenge of elucidating the performance of fluoroelastomers within the HMX(octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine)based polymer-bonded explosives(PBXs).To simulate the confined interface in PBXs,bilayer films of F2314/HMX and F2311/HMX were designed.Neutron reflectivity(NR),nanoindentation,and X-ray reflectivity(XRR)were employed to examine the layer thickness,interface characteristics,diffusion behavior,and surface morphology of the bilayers.NR measurements revealed interface thicknesses of 45Å and 98Å for F2314/HMX and F2311/HMX,respectively,indicating deeper penetration of F2311 into the HMX matrix.NR also suggested a denser polymer network with a higher scattering length density(SLD)near the HMX interface for both fluoroelastomers,while the bound layer of F2311 was notably thicker.Nanoindentation cross-checks and confirms the presence of a bound layer,highlighting the differences in stiffness and diffusion ability between the two polymers.The consistency between the NR and nanoindentation results suggests that F2311 demonstrates better flexibility and elasticity,whereas F2314 is stiffer and more plastic.Accordingly,the structures and performances of different fluoroelastomers at the HMX interface are discussed,which can provide valuable insights into the selection of binders for PBX formulations tailored to specific applications.展开更多
The detonation of fuel-rich explosives yields combustible products that persistently burn upon mixing with ambient oxygen,releasing additional energy through a phenomenon known as the afterburning effect.This process ...The detonation of fuel-rich explosives yields combustible products that persistently burn upon mixing with ambient oxygen,releasing additional energy through a phenomenon known as the afterburning effect.This process greatly influences the evolution of confined blast loading and the subsequent structural response,which is crucial in confined blast scenarios.Given the complex nature of the reaction process,accurate analysis of the afterburning effect remains challenging.Previous studies have either overlooked the mechanisms of detonation product combustion or failed to provide experimental validation.This study introduces a three-dimensional model to effectively characterize the combustion of detonation products.The model integrates chemical reaction source terms into the governing equations to consider the combustion processes.Numerical simulations and experimental tests were conducted to analyze the combustion and energy release from the detonation products of fuel-rich explosives in confined spaces.Approximately 50%of the energy was released during the combustion of detonation products in a confined TNT explosion.Although the combustion of these products was much slower than the detonation process,it aligned with the dynamic response of the structure,which enhanced the explosive yield.Excluding afterburning from the analysis reduced the center-point deformation of the structure by 30%.Following the inclusion of afterburning,the simulated quasistatic pressure increased by approximately 45%.Subsequent comparisons highlighted the merits of the proposed approach over conventional methods.This approach eliminates the reliance on empirical parameters,such as the amount and rate of energy release during afterburning,thereby laying the foundation for understanding load evolution in more complex environments,such as ships,buildings,and underground tunnels.展开更多
Realizing effective enhancement in the thermally conductive performance of polymer bonded explosives(PBXs) is vital for improving the resultant environmental adaptabilities of the PBXs composites. Herein, a kind of pr...Realizing effective enhancement in the thermally conductive performance of polymer bonded explosives(PBXs) is vital for improving the resultant environmental adaptabilities of the PBXs composites. Herein, a kind of primary-secondary thermally conductive network was designed by water-suspension granulation, surface coating, and hot-pressing procedures in the graphene-based PBXs composites to greatly increase the thermal conductive performance of the composites. The primary network with a threedimensional structure provided the heat-conducting skeleton, while the secondary network in the polymer matrix bridged the primary network to increase the network density. The enhancement efficiency in the thermally conductive performance of the composites reached the highest value of 59.70% at a primary-secondary network ratio of 3:1. Finite element analysis confirmed the synergistic enhancement effect of the primary and secondary thermally conductive networks. This study introduces an innovative approach to designing network structures for PBX composites, significantly enhancing their thermal conductivity.展开更多
DNAN-based insensitive melt-cast explosives have been widely utilized in insensitive munition in recent years. When constrained DNAN-based melt-cast explosives are ignited under thermal stimulation, the base explosive...DNAN-based insensitive melt-cast explosives have been widely utilized in insensitive munition in recent years. When constrained DNAN-based melt-cast explosives are ignited under thermal stimulation, the base explosive exists in a molten liquid state, where high-temperature gases expand and react in the form of bubble clouds within the liquid explosive;this process is distinctly different from the dynamic crack propagation process observed in the case of solid explosives. In this study, a control model for the reaction evolution of burning-bubble clouds was established to describe the reaction process and quantify the reaction violence of DNAN-based melt-cast explosives, considering the size distribution and activation mechanism of the burning-bubble clouds. The feasibility of the model was verified through experimental results. The results revealed that under geometrically similar conditions, with identical confinement strength and aspect ratio, larger charge structures led to extended initial gas flow and surface burning processes, resulting in greater reaction equivalence and violence at the casing fracture.Under constant charge volume and size, a stronger casing confinement accelerated self-enhanced burning, increasing the internal pressure, reaction degree, and reaction violence. Under a constant casing thickness and radius, higher aspect ratios led to a greater reaction violence at the casing fracture.Moreover, under a constant charge volume and casing thickness, higher aspect ratios resulted in a higher internal pressure, increased reaction degree, and greater reaction violence at the casing fracture. Further,larger ullage volumes extended the reaction evolution time and increased the reaction violence under constant casing dimensions. Through a matching design of the opening threshold of the pressure relief holes and the relief structure area, a stable burning reaction could be maintained until completion,thereby achieving a control of the reaction violence. The proposed model could effectively reflect the effects of the intrinsic burning rate, casing confinement strength, charge size, ullage volume, and pressure relief structure on the reaction evolution process and reaction violence, providing a theoretical method for the thermal safety design and reaction violence evaluation of melt-cast explosives.展开更多
The new CL-20(hexanitrohexaazaisowurtzitane)type aluminized explosives in the overdrive detonation(ODD)conditions of the core problem is how to accurately represent the state of the overdrive detonation products.To th...The new CL-20(hexanitrohexaazaisowurtzitane)type aluminized explosives in the overdrive detonation(ODD)conditions of the core problem is how to accurately represent the state of the overdrive detonation products.To this end,this paper is based on the impedance matching method to test the ODD conditions of CL-20 type aluminium explosive particle velocity.Calculated the interfacial pressure of the shock wave in different media.Determined the characteristic parameters of the reaction zone of the detonation of CL-20 aluminized explosives.Calibrated the parameters of the JoneseWilkinseLee(JWL)+γ equation for the detonation products(DPs).Revealed the effect of different DPs equation of state(EOS)on the Hugoniot pressure of ODD.The results indicate that when the content of aluminum powder ranges from 0%to 30%,the duration of the ODD reaction zone and the width of the detonation reaction zone of the CL-20-based aluminized explosive are directly proportional to the content of aluminum powder.The width of the detonation reaction zone is increased by 1.97 times to 2.7 times compared to that of the reaction zone without the addition of aluminum powder.However,the energy release efficiency of the detonation reaction zone is inversely proportional to the content of aluminum powder.When the aluminum powder content was held constant,the incorporation of AP caused a 25%reduction in the energy release efficiency of the detonation reaction zone.Compared with existing ODD state equations,the JWL +γ equation is superior in calibrating overpressure Hugoniot data and the isentropic expansion in the C-J state.The deviation between calculated pressure results and experimental measurements is within 6%.展开更多
In order to find out the detonation mechanism of intermolecular explosives (IMX), the EAR15 explosive is studied by the experiments and numerical modeling. The results show that EAR15 is a nonideal explosive, since in...In order to find out the detonation mechanism of intermolecular explosives (IMX), the EAR15 explosive is studied by the experiments and numerical modeling. The results show that EAR15 is a nonideal explosive, since in the detonation reaction zone both reacted and unreacted ammonium nitrate (AN) absorb the energy through the interface, resulting in the characteristic of nonideal detonation. In our tests, only 19%-49% active AN takes part in reaction, the rest behaves as the inert at the detonation wave front.展开更多
Aim To study fuel dispersion in fuel air explosive(FAE) and computational ways of fuel dispersion velocity in the near area. Methods\ The dispersion process of fuel in FAE was analyzed by the use of results measured ...Aim To study fuel dispersion in fuel air explosive(FAE) and computational ways of fuel dispersion velocity in the near area. Methods\ The dispersion process of fuel in FAE was analyzed by the use of results measured with KODAK EKTAPRO EM Motion Analyzer and setting up mechanical models. Results\ Computational methods for fuel dispersion velocity in the acceleration stage is given and taken as a base for the study of fuel dispersion in the intermediate and the far area. Conclusion\ When the fuel flow velocity is higher than that of the explosion gas in the center cavity, the fuel divides with the explosion gas and its velocity of flow reaches a maximum. The acceleration stage ends at that time. The fuel dispersion velocity at this time is the initial conditions for numeral analyses of dispersion process in the intermediate and far areas.展开更多
In this review, excerpts from the literature of thermobaric(TBX) and enhanced blast explosives(EBX) that are concentrated on studies that include their compositions, properties, reactive metal components, modeling and...In this review, excerpts from the literature of thermobaric(TBX) and enhanced blast explosives(EBX) that are concentrated on studies that include their compositions, properties, reactive metal components, modeling and computations are presented.展开更多
基金Opening Foundation of Key Laboratory of Explosive Energy Utilization and Control,Anhui Province(BP20240104)Graduate Innovation Program of China University of Mining and Technology(2024WLJCRCZL049)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_2701)。
文摘Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.
基金supported by the fundamental research funds of Zhejiang Sci-Tech University(No.22212286-Y)the Natural Science Foundation of Zhejiang Province(No.LQ24B040003)。
文摘Aromatic nitro compounds present substantial health and environmental concerns due to their toxic nature and potential explosive properties.Consequently,the development of host–vip molecular recognition systems for these compounds serves a dual-purpose:enabling the fabrication of high-performance sensors for detection and guiding the design of efficient adsorbents for environmental remediation.This study investigated the host–vip recognition behavior of perethylated pillar[n]arenes toward two aromatic nitro molecules,1-chloro-2,4-dinitrobenzene and picric acid.Various techniques including^(1)H NMR,2D NOESY NMR,and UV-vis spectroscopy were employed to explore the binding behavior between pillararenes and aromatic nitro vips in solution.Moreover,valuable single crystal structures were obtained to elucidate the distinct solid-state assembly behaviors of these vips with different pillararenes.The assembled solid-state supramolecular structures observed encompassed a 1:1 host–vip inclusion complex,an external binding complex,and an exo-wall tessellation complex.Furthermore,based on the findings from these systems,a pillararene-based test paper was developed for efficient picric acid detection,and the removal of picric acid from solution was also achieved using pillararenes powder.This research provides novel insights into the development of diverse host–vip systems toward hazardous compounds,offering potential applications in environmental protection and explosive detection domains.
基金supported by the National Natural Science Foundation of China(Grant Nos.12002156,11972185,12372136)Research Fund of State Key Laboratory of Mechanics and Control for Aerospace Structures(Grant No.MCMS-I-0222K01)。
文摘While the moisture content of soil affects significantly the blast impulse of shallow buried explosives,the role of surface-covering water(SCW)on soil in such blast impulse remains elusive.A combined experimental and numerical study has been carried out to characterize the effect of SCW on transferred impulse and loading magnitude of shallow buried explosives.Firstly,blast tests of shallow buried explosives were conducted,with and without the SCW,to quantitatively assess the blast loading impulse.Subsequently,finite element(FE)simulations were performed and validated against experimental measurement,with good agreement achieved.The validated FE model was then employed to predict the dynamic response of a fully-clamped metallic circular target,subjected to the explosive impact of shallow buried explosives with SCW,and explore the corresponding physical mechanisms.It was demonstrated that shallow buried explosives in saturated soil generate a greater impulse transferred towards the target relative to those in dry soil.The deformation displacement of the target plate is doubled.Increasing the height of SCW results in enhanced center peak deflection of the loaded target,accompanied by subsequent fall,due to the variation of deformation pattern of the loaded target from concentrated load to uniform load.Meanwhile,the presence of SCW increases the blast impulse transferred towards the target by three times.In addition,there exists a threshold value of the burial depth that maximizes the impact impulse.This threshold exhibits a strong sensitivity to SCW height,decreasing with increasing SCW height.An empirical formula for predicting threshold has been provided.Similar conclusions can be drawn for different explosive masses.The results provide technical guidance on blast loading intensity and its spatial distribution considering shallow buried explosives in coast-land battlefields,which can ultimately contribute to better protective designs.
基金Anhui Province Key Research and Development Plan(2022a05020021)China Coal Science and Industry Group Chongqing Research Institute Independent Research and Development Project(2023YBXM58)。
文摘Cu/Al composite plates were fabricated using rolling and underwater explosive welding techniques,separately,to compare their interfacial microstructures and mechanical performance.Interface morphology,grain orientation,grain boundary characteristics,and phase distribution were analyzed through optical microscope,scanning electron microscope,and electron backscattered diffractometer.Mechanical properties were assessed using tensile shear tests,90°bending tests,and hardness measurements.Vickers hardness and nanoindentation test results further provided information on the hardness distributions.Results indicate that the diffusion layer in rolled Cu/Al composites is relatively fragile,while that produced by underwater explosive welding features a diffusion layer of approximately 18μm in thickness,which is metallurgically bonded through atomic diffusion.The tensile shear strength of these composites ranges from 64.45 MPa to 70.84 MPa,and in the 90°three-point bending test,the underwater-explosive-welded samples exhibit superior flexural performance.This study elucidates the effects of different manufacturing methods on the interfacial properties and mechanical performance of Cu/Al composites,offering essential insights for the selection of manufacturing methods and applications.
基金Jiangsu Provincial Natural Science Foundation of China(BK20211232)2023 Major Science and Technology Projects of Nanjing City(202309011)。
文摘To further reduce the explosive thickness and to improve the bonding quality of titanium/steel composite plates,explosive welding experiments of TA1/Q235 were conducted using a low detonation velocity explosive(53#)under the guidance of the explosive welding lower limit principle with the flyer plate thicknesses of 1,2,and 4 mm and gaps of 3,6,and 8 mm.The weldability window for titanium/steel explosive welding was calculated,and a quantitative relationship between dynamic and static process parameters was developed.Aβ-V_(p) high-speed inclined collision model was proposed,and two-dimensional numerical simulations for the explosive welding tests were performed using the smoothed particle hydrodynamics(SPH)algorithm,revealing the growth evolution mechanisms of the typical waveform morphology characteristics.Through microstructural characterization techniques,such as optical microscope,scanning electron microscope,energy dispersive spectrometer,and electron backscattered diffractometer,and mechanical property tests in terms of shear strength,bending performance,and impact toughness,the microstructure and mechanical properties of the interfaces of explosively welded TA1/Q235 composite plates were investigated.Results show that the quality of interface bonding is excellent,presenting typical waveform morphology with an average interface shear strength above 330 MPa and an average impact toughness exceeding 81 J.All samples can be bent to 180°without significant delamination or cracking defects.
基金Natural Science Foundation of Shanxi Province(202203021221149)Key Research and Development Program of Shanxi Province(202302010101006,202202150401016)+1 种基金Scientific Research Start-up Fund for the Introduction of Talents in Shanxi Institute of Electronic Science and Technology(2023RKJ021)Key R&D Program of Linfen City(2334)。
文摘High-performance pure nickel N6/steel 45#composite plate(N6/45#)was prepared using explosive welding technique.The microstructure of the interface and nearby regions was characterized and analyzed by optical microscope,scanning electron microscope,electron backscatter diffraction,and mechanical property testing,and the microstructural features and mechanical properties of the explosive welding interface were explored.The results show that along the direction of explosive welding,the pure nickel N6/steel 45#composite plate interface gradually evolves from a flat bond to a typical wavy bond.The grains at the crests and troughs exhibit high heterogeneity,and the closer to the interface,the finer the grains.Recrystallization and low-stress deformation bands are formed at the bonding interface.Nanoindentation tests reveal that plastic deformation occurs in the interfacial bonding zone,and the nanohardness values in the crest regions are higher than that in the trough regions.The tensile strength of the N6/45#interface is 599.8 MPa,with an average shear strength of 326.3 MPa.No separation phenomenon is observed between N6 and 45#after the bending test.
文摘In order to improve the quality of loading and make the ammuni- tion safe in use,a new loading technique of ordered solidification has been studied.The study shows that the adoption of this new technique makes the charge more compact and brings about a satisfactory supplement of liquid ex- plosives,thus increasing the charge density,which is most advantageous to the crimination of pores,cavities,gaps at the bottom and in loose struc- tures.The physical mechanical properties of the charge are hence greatly im- proved,and the sensitivity of the charge to environmental stimulations is much lowered.
基金supported by the National Natural Science Foundation of China(Gant Nos.11372291 and 11902298)。
文摘Detonation performance is crucial for evaluating the power of high explosives(HEs),and the equation of state(EOS)that accurately describes the high-temperature,high-pressure,and high-temperature,medium-pressure states of detonation products is key to assessing the damage efficiency of these energetic materials.This article examines the limitations of the VLW EOS in representing the thermodynamic states of explosive detonation gas products under high-temperature and medium-to high-pressure conditions.A new gas EOS for detonation products,called VHL(Virial-Han-Long),is proposed.The accuracy of VHL in describing gas states under high-temperature and medium-to high-pressure conditions is verified,and its performance in evaluating explosive detonation and working capabilities is explored.The results demonstrate that VHL exhibits high precision in calculating detonation performance.Subsequently,the detonation performance of three new HEs(ICM-101,ONC,and TNAZ)was calculated and compared to traditional HEs(TATB,CL-20,and HMX).The results indicate that ONC has superior detonation performance compared to the other explosives,while ICM-101 shows a detonation velocity similar to CL-20 but with slightly lower detonation pressure.The detonation characteristics of TNAZ are comparable to those of the standard HE HMX.From the perspective of products,considering the comprehensive work performance(mechanical work and detonation heat),both ONC and ICM-101demonstrate relatively superior performance.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12305043 and 12165016)the Natural Science Foundation of Jiangsu Province(Grant No.BK20220511)+1 种基金the Project of Undergraduate Scientific Research(Grant No.22A684)the support from the Jiangsu Specially-Appointed Professor Program。
文摘Information spreading has been investigated for many years,but the mechanism of why the information explosively catches on overnight is still under debate.This explosive spreading phenomenon was usually considered driven separately by social reinforcement or higher-order interactions.However,due to the limitations of empirical data and theoretical analysis,how the higher-order network structure affects the explosive information spreading under the role of social reinforcement has not been fully explored.In this work,we propose an information-spreading model by considering the social reinforcement in real and synthetic higher-order networks,describable as hypergraphs.Depending on the average group size(hyperedge cardinality)and node membership(hyperdegree),we observe two different spreading behaviors:(i)The spreading progress is not sensitive to social reinforcement,resulting in the information localized in a small part of nodes;(ii)a strong social reinforcement will promote the large-scale spread of information and induce an explosive transition.Moreover,a large average group size and membership would be beneficial to the appearance of the explosive transition.Further,we display that the heterogeneity of the node membership and group size distributions benefit the information spreading.Finally,we extend the group-based approximate master equations to verify the simulation results.Our findings may help us to comprehend the rapidly information-spreading phenomenon in modern society.
基金supported by the National Natural Science Foundation of China(Grant No.12402445)the National Defense Foundation Stabilization Support Program(Grant No.JCKYS2024212108)the National Key Laboratory of Shock Wave Physics and Detonation Physics Foundation(Grant No.2024CXPTGFJJ06404)。
文摘Accurate characterization of three-dimensional burning crack propagation remains pivotal yet challenging for energetic material safety,as conventional diagnostics and models inadequately resolve coupled crack-pressure dynamics in confined explosives.This study combines a novel spherical confinement system(with/without sapphire windows)with synchronized high-speed imaging and 3D reconstruction to overcome optical limitations in opaque explosives.Experimental analysis of centrally ignited HMX-based PBX-1 reveals:(1)burning cracks propagate radially with equatorial acceleration and polar deceleration,(2)systematic formation of 3–4 dominant crack branches across geometries,and(3)pressure evolution exhibiting gradual accumulation(subsurface cracking)followed by exponential growth(surface burn-through),with decay governed by cavity expansion.Building on Hill's framework,we develop a model incorporating cavity volume and fracture toughness criteria,validated against PBX explosive(95%HMX-based)experiments.The model demonstrates improved prediction of pressure trends compared to prior approaches,particularly in resolving laminar-phase accumulation and crackinduced surge transitions.Results establish structural cavity volume as a critical modulator of measured pressure and reveal direction-dependent crack kinematics as fundamental features of constrained combustion.This work provides experimentally validated insights into mechanisms of reaction pressure development and burning cracks pathways during constrained PBX explosive combustion.
基金the National Key Research and Development Program of China(Grant No.2020YFA0711800)Jiangsu Provincial Innovation Capacity Building Program(Jiangsu Safety Emergency Equipment Technology Innovation Center(Grant No.BM2022013)the National Natural Science Foundation of China(Grant No.12372373).
文摘Methane in situ explosion fracturing(MISEF)technology improves deep reservoir permeability by generating multiple radial fractures around the wellbore,with fracture propagation significantly influenced by in situ stress and bedding structures.However,limited experimental studies on the combined effects of triaxial stress and explosive loading,along with detailed characterization of explosive damage,hinder further optimization of this technology.This study introduces an experimental method to simulate MISEF under triaxial stress,using CH4-O2 detonation to generate controllable explosive loads.Bedding shale samples are fractured in a pseudo-triaxial core holder.Micro-computed tomography(μ-CT)and nuclear magnetic resonance(NMR)are used to quantify three-dimensional(3D)fracture characteristics and pore structure evolution.LS-DYNA simulations are employed to elucidate fracture propagation and dynamic behavior.The results show that detonation produces explosive loads with overpressures of 69.929-84.338 MPa and pressure rise rates of up to 555.624 MPa/ms,exhibiting an oscillation-attenuation characteristic.μ-CT reveals 3-5 radial fractures,with 3D fracture volume and surface area decreasing as triaxial stress rises.Hoop stress inhibits fracture propagation more than axial stress.NMR analysis shows that explosive loading converts bound fluid to movable fluid,while in situ stress suppresses this process.With increasing triaxial stress,micropore(T2<10 ms)changes are minimal,while meso/macropore and fracture(T2>10 ms)NMR signals decrease significantly.Higher triaxial stress reduces water overpressure of stress loading chambers and vibrational displacement at sample boundaries.Numerical simulations indicate that explosive loading generates hoop tensile stress,which drives the formation of radial fractures.Triaxial stress increases hoop compressive stress,suppressing fracture propagation.Fractures initiate along bedding planes,forming cross-shaped or T-shaped patterns.
文摘The impact safety of explosive charges has been focused in these decades. The fragment impact is widely used to evaluate the response of explosive charges. In our work, the explosive detonation driving technique was used to generate a high velocity fragment with large mass. When the fragment masses are10 g, 16 g, 25 g, and 50 g, the highest velocity of fragments can reach 2400 m/s, 2100 m/s, 1900 m/s, and1400 m/s, respectively. The high velocity fragment with large mass was used to evaluate the safety of two kinds of CL-20 based explosive charges. The effects of the fragment mass and velocity were analyzed.Especially, the reaction extent was obtained based on visible phenomenon. The CL-20-based explosive charge containing Al had a higher safety level than that without Al. It was because Al had good ductility,and further improved the mechanical property of the material. Also, the numerical simulation was conducted to understand the reaction characteristics of the CL-20-based explosive charge. The results showed that as the fragment mass and velocity increased, the reaction became more violent.
基金supported in part by the National Natural Science Foundation of China(Nos.12335018,12105264,and 12275248)NSAF Joint Fund Project(Nos.U2230107,U1730244,U2130207)+1 种基金Innovation and Development Fund of China Academy of Engineering Physics(No.CXKS20240052)Central Guidance for Local Science and Technology Development Fund Project(No.2023ZYDF075).
文摘The current work addresses the challenge of elucidating the performance of fluoroelastomers within the HMX(octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine)based polymer-bonded explosives(PBXs).To simulate the confined interface in PBXs,bilayer films of F2314/HMX and F2311/HMX were designed.Neutron reflectivity(NR),nanoindentation,and X-ray reflectivity(XRR)were employed to examine the layer thickness,interface characteristics,diffusion behavior,and surface morphology of the bilayers.NR measurements revealed interface thicknesses of 45Å and 98Å for F2314/HMX and F2311/HMX,respectively,indicating deeper penetration of F2311 into the HMX matrix.NR also suggested a denser polymer network with a higher scattering length density(SLD)near the HMX interface for both fluoroelastomers,while the bound layer of F2311 was notably thicker.Nanoindentation cross-checks and confirms the presence of a bound layer,highlighting the differences in stiffness and diffusion ability between the two polymers.The consistency between the NR and nanoindentation results suggests that F2311 demonstrates better flexibility and elasticity,whereas F2314 is stiffer and more plastic.Accordingly,the structures and performances of different fluoroelastomers at the HMX interface are discussed,which can provide valuable insights into the selection of binders for PBX formulations tailored to specific applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.52171318 and 12202329)Joint Foundation of the Ministry of Education(Grant No.8091B022105)。
文摘The detonation of fuel-rich explosives yields combustible products that persistently burn upon mixing with ambient oxygen,releasing additional energy through a phenomenon known as the afterburning effect.This process greatly influences the evolution of confined blast loading and the subsequent structural response,which is crucial in confined blast scenarios.Given the complex nature of the reaction process,accurate analysis of the afterburning effect remains challenging.Previous studies have either overlooked the mechanisms of detonation product combustion or failed to provide experimental validation.This study introduces a three-dimensional model to effectively characterize the combustion of detonation products.The model integrates chemical reaction source terms into the governing equations to consider the combustion processes.Numerical simulations and experimental tests were conducted to analyze the combustion and energy release from the detonation products of fuel-rich explosives in confined spaces.Approximately 50%of the energy was released during the combustion of detonation products in a confined TNT explosion.Although the combustion of these products was much slower than the detonation process,it aligned with the dynamic response of the structure,which enhanced the explosive yield.Excluding afterburning from the analysis reduced the center-point deformation of the structure by 30%.Following the inclusion of afterburning,the simulated quasistatic pressure increased by approximately 45%.Subsequent comparisons highlighted the merits of the proposed approach over conventional methods.This approach eliminates the reliance on empirical parameters,such as the amount and rate of energy release during afterburning,thereby laying the foundation for understanding load evolution in more complex environments,such as ships,buildings,and underground tunnels.
基金supported by the National Natural Science Foundation of China (Grant Nos. 22475179 and 22275173)。
文摘Realizing effective enhancement in the thermally conductive performance of polymer bonded explosives(PBXs) is vital for improving the resultant environmental adaptabilities of the PBXs composites. Herein, a kind of primary-secondary thermally conductive network was designed by water-suspension granulation, surface coating, and hot-pressing procedures in the graphene-based PBXs composites to greatly increase the thermal conductive performance of the composites. The primary network with a threedimensional structure provided the heat-conducting skeleton, while the secondary network in the polymer matrix bridged the primary network to increase the network density. The enhancement efficiency in the thermally conductive performance of the composites reached the highest value of 59.70% at a primary-secondary network ratio of 3:1. Finite element analysis confirmed the synergistic enhancement effect of the primary and secondary thermally conductive networks. This study introduces an innovative approach to designing network structures for PBX composites, significantly enhancing their thermal conductivity.
基金supported by the National Natural Science Foundation of China (Grant No. 12002044)。
文摘DNAN-based insensitive melt-cast explosives have been widely utilized in insensitive munition in recent years. When constrained DNAN-based melt-cast explosives are ignited under thermal stimulation, the base explosive exists in a molten liquid state, where high-temperature gases expand and react in the form of bubble clouds within the liquid explosive;this process is distinctly different from the dynamic crack propagation process observed in the case of solid explosives. In this study, a control model for the reaction evolution of burning-bubble clouds was established to describe the reaction process and quantify the reaction violence of DNAN-based melt-cast explosives, considering the size distribution and activation mechanism of the burning-bubble clouds. The feasibility of the model was verified through experimental results. The results revealed that under geometrically similar conditions, with identical confinement strength and aspect ratio, larger charge structures led to extended initial gas flow and surface burning processes, resulting in greater reaction equivalence and violence at the casing fracture.Under constant charge volume and size, a stronger casing confinement accelerated self-enhanced burning, increasing the internal pressure, reaction degree, and reaction violence. Under a constant casing thickness and radius, higher aspect ratios led to a greater reaction violence at the casing fracture.Moreover, under a constant charge volume and casing thickness, higher aspect ratios resulted in a higher internal pressure, increased reaction degree, and greater reaction violence at the casing fracture. Further,larger ullage volumes extended the reaction evolution time and increased the reaction violence under constant casing dimensions. Through a matching design of the opening threshold of the pressure relief holes and the relief structure area, a stable burning reaction could be maintained until completion,thereby achieving a control of the reaction violence. The proposed model could effectively reflect the effects of the intrinsic burning rate, casing confinement strength, charge size, ullage volume, and pressure relief structure on the reaction evolution process and reaction violence, providing a theoretical method for the thermal safety design and reaction violence evaluation of melt-cast explosives.
基金supported by the National Natural Science Foundation of China(NSFC,Grant Nos.11872120,12102050)Key Laboratory of Explosion Science and Technology(Grant No.QNKT22-01).
文摘The new CL-20(hexanitrohexaazaisowurtzitane)type aluminized explosives in the overdrive detonation(ODD)conditions of the core problem is how to accurately represent the state of the overdrive detonation products.To this end,this paper is based on the impedance matching method to test the ODD conditions of CL-20 type aluminium explosive particle velocity.Calculated the interfacial pressure of the shock wave in different media.Determined the characteristic parameters of the reaction zone of the detonation of CL-20 aluminized explosives.Calibrated the parameters of the JoneseWilkinseLee(JWL)+γ equation for the detonation products(DPs).Revealed the effect of different DPs equation of state(EOS)on the Hugoniot pressure of ODD.The results indicate that when the content of aluminum powder ranges from 0%to 30%,the duration of the ODD reaction zone and the width of the detonation reaction zone of the CL-20-based aluminized explosive are directly proportional to the content of aluminum powder.The width of the detonation reaction zone is increased by 1.97 times to 2.7 times compared to that of the reaction zone without the addition of aluminum powder.However,the energy release efficiency of the detonation reaction zone is inversely proportional to the content of aluminum powder.When the aluminum powder content was held constant,the incorporation of AP caused a 25%reduction in the energy release efficiency of the detonation reaction zone.Compared with existing ODD state equations,the JWL +γ equation is superior in calibrating overpressure Hugoniot data and the isentropic expansion in the C-J state.The deviation between calculated pressure results and experimental measurements is within 6%.
文摘In order to find out the detonation mechanism of intermolecular explosives (IMX), the EAR15 explosive is studied by the experiments and numerical modeling. The results show that EAR15 is a nonideal explosive, since in the detonation reaction zone both reacted and unreacted ammonium nitrate (AN) absorb the energy through the interface, resulting in the characteristic of nonideal detonation. In our tests, only 19%-49% active AN takes part in reaction, the rest behaves as the inert at the detonation wave front.
文摘Aim To study fuel dispersion in fuel air explosive(FAE) and computational ways of fuel dispersion velocity in the near area. Methods\ The dispersion process of fuel in FAE was analyzed by the use of results measured with KODAK EKTAPRO EM Motion Analyzer and setting up mechanical models. Results\ Computational methods for fuel dispersion velocity in the acceleration stage is given and taken as a base for the study of fuel dispersion in the intermediate and the far area. Conclusion\ When the fuel flow velocity is higher than that of the explosion gas in the center cavity, the fuel divides with the explosion gas and its velocity of flow reaches a maximum. The acceleration stage ends at that time. The fuel dispersion velocity at this time is the initial conditions for numeral analyses of dispersion process in the intermediate and far areas.
文摘In this review, excerpts from the literature of thermobaric(TBX) and enhanced blast explosives(EBX) that are concentrated on studies that include their compositions, properties, reactive metal components, modeling and computations are presented.
