Serial-parallel manipulators are of great interest to academic community in recent years,especially those composed of classical parallel mechanisms.There have been many studies around 2(3RPS)and 2(3SPR)S-PMs,but unfor...Serial-parallel manipulators are of great interest to academic community in recent years,especially those composed of classical parallel mechanisms.There have been many studies around 2(3RPS)and 2(3SPR)S-PMs,but unfortunately their inverse kinematics have not yet been resolved.This paper discovers that the unknown kinematic parameters of middle platform are responsible for the unresolvable of inverse kinematics,meanwhile the unknown kinematic parameters of middle platform also have huge coupling relationships.Therefore,to break through this challenges,the huge coupling relationships are decoupled layer by layer,the kinematic parameters of middle platform are solved by combining Sylvester's elimination method,and the inverse displacements of 2(3RPS)and 2(3SPR)S-PMs are obtained subsequently.This paper not only solves the inverse kinematics of classical 2(3RPS)and 2(3SPR)S-PMs,but also reveals the essence of the inverse kinematics of general(3-DOF)+(3-DOF)6-DOF S-PMs and proposes a corresponding solution.展开更多
The existing research on rescue robots has focused mainly on reconnaissance,detection,and firefighting,and a small number of robots that can achieve human rescue have problems such as poor safety and stability and ins...The existing research on rescue robots has focused mainly on reconnaissance,detection,and firefighting,and a small number of robots that can achieve human rescue have problems such as poor safety and stability and insufficient carrying capacity.This article addresses the above issues and cleverly combines the advantages of soft robotic arms,underactuated robotic arms,and suction cups based on the principles of bionics.A new design for a robotic arm was proposed,and its working principle was explained.Then,the human rescue process was divided into two stages,and the grasping force of the robotic arm in each stage was analyzed separately.Finally,a prototype of the principle was developed,and the feasibility of the design principle of the robotic arm was verified through grasping experiments on a cross-sectional contour model of the human chest.At the same time,grasping experiments were conducted on different objects to demonstrate the potential application of the robotic arm in grasping ground objects.This research proposes a stress envelope adsorption rescue robot arm inspired by the adhesion ability of the Drosera plant and the stress envelope effect,which can apply force to the entire surface of the human body,reduce local force on the human body,ensure load-bearing capacity and adaptability,and improve the safety and stability of rescue grasping.展开更多
The quantity of space debris on Earth orbit has escalated tremendously in recent years, presenting a significant hazard to human space operations. It is urgent to develop effective measures to capture and remove vario...The quantity of space debris on Earth orbit has escalated tremendously in recent years, presenting a significant hazard to human space operations. It is urgent to develop effective measures to capture and remove various space debris. For this purpose, this paper presents a tendon-actuated flexible deployable manipulator. The flexible manipulator consists of several deployable units connected by Cardan joints and actuated by tendons. Compared with the present technologies for capturing space debris such as rigid robotic arm or flying net, this flexible manipulator is deployable, reusable, lightweight and applicable to the capture of large space debris. In order to investigate its deployment dynamics, an accurate dynamic model of the flexible manipulator is established based on the natural coordinate formulation (NCF) and the absolute nodal coordinate formulation (ANCF). Subsequently, numerical simulations are carried out to study the effects of system parameters and the base satellite on its deployment dynamics. Finally, ground experiments for both deployment and bending of the flexible manipulator are conducted to verify its effectiveness and feasibility.展开更多
The position deviation of the underwater manipulator generated by vortex-induced vibration(VIV)in the shear flow increases relative to that in the uniform flow.Thus,this study established an experimental platform to i...The position deviation of the underwater manipulator generated by vortex-induced vibration(VIV)in the shear flow increases relative to that in the uniform flow.Thus,this study established an experimental platform to investigate the vibration characteristics of the underwater manipulator under shear flow.The vibration response along the manipulator was obtained and compared with that in the uniform flow.Results indicated that the velocity,test height,and flow field were the main factors affecting the VIV of the underwater manipulator.With the increase in the reduced velocity(U_(r)),the dimensionless amplitudes increased rapidly in the in-line(IL)direction with a maximum of 0.13D.The vibration responses in the cross-flow(CF)and IL directions were concentrated at positions 2,3 and positions 1,2,with peak values of 0.46 and 0.54 mm under U_(r)=1.54,respectively.In addition,the vibration frequency increased with the reduction of velocity.The dimensionless dominant frequency in the CF and IL directions varied from 0.39-0.80 and 0.35-0.64,respectively.Moreover,the ratio of the CF and IL directions was close to 1 at a lower U_(r).The standard deviation of displacement initially increased and then decreased as the height of the test location increased.The single peak value of the standard deviation showed that VIV presented a single mode.Compared with the uniform flow,the maximum and average values of VIV displacement increased by 104%and 110%under the shear flow,respectively.展开更多
A cable-driven redundant manipulator(CDRM)characterized by redundant degrees of freedom and a lightweight,slender design can perform tasks in confined and restricted spaces efficiently.However,the complex multistage c...A cable-driven redundant manipulator(CDRM)characterized by redundant degrees of freedom and a lightweight,slender design can perform tasks in confined and restricted spaces efficiently.However,the complex multistage coupling between drive cables and passive joints in CDRM leads to a challenging dynamic model with difficult parameter identification,complicating the efforts to achieve accurate modeling and control.To address these challenges,this paper proposes a dynamic modeling and adaptive control approach tailored for CDRM systems.A multilevel kinematic model of the cable-driven redundant manipulator is presented,and a screw theory is employed to represent the cable tension and cable contact forces as spatial wrenches,which are equivalently mapped to joint torque using the principle of virtual work.This approach simplifies the mapping process while maintaining the integrity of the dynamic model.A recursive method is used to compute cable tension section-by-section for enhancing the efficiency of inverse dynamics calculations and meeting the high-frequency demands of the controller,thereby avoiding large matrix operations.An adaptive control method is proposed building on this foundation,which involves the design of a dynamic parameter adaptive controller in the joint space to simplify the linearization process of the dynamic equations along with a closed-loop controller that incorporates motor parameters in the driving space.This approach improves the control accuracy and dynamic performance of the CDRM under dynamic uncertainties.The accuracy and computational efficiency of the dynamic model are validated through simulations,and the effectiveness of the proposed control method is demonstrated through control tests.This paper presents a dynamic modeling and adaptive control approach for CDRM to enhance accuracy and performance under dynamic uncertainties.展开更多
Pulsating flow is a common condition for under water manipulators in Bohai Bay.This study aimed to investigate the effects of pulsation frequency and amplitude on the hydrodynamic characteristics of an underwater mani...Pulsating flow is a common condition for under water manipulators in Bohai Bay.This study aimed to investigate the effects of pulsation frequency and amplitude on the hydrodynamic characteristics of an underwater manipulator with different postures using the user-defined function (UDF) method. The lift coefficient (C_(L)), drag coefficient (C_(D)), and vortex shedding of the underwater manipulator in single-and dualarm forms were obtained. Results indicated that the maximum increase in the lift and drag coefficients subjected to the pulsation parameters was 24.45%and 28%, respectively, when the fluid flowed past a single arm. Compared with the single arm, the lift and drag coefficients of the arms were higher than those of the single arm when arm 2 was located upstream. Additionally, the pulsation frequency had no obvious effect on the manipulator, but the C_(L) and C_(D) of arm 2 showed an obvious increasing trend with an increase in pulsation amplitude. Meanwhile, when arm 2 was located downstream, the C_(L) and C_(D) of arm 2 were reduced by 16.38%and 1.15%, respectively, with an increase in the pulse frequency,and the maximum increase in the lift and dragcoefficients was 33.33%and 16.78%,respectively,with increasing pulsation amplitude.Moreover, the downstream wake morphology changed significantly, and a combined vortex phenomenon appeared. Finally, a theoretical basis for examining the hydrodynamic characteristics of marine engineering equipment was established to aid future marine resource exploitation.展开更多
This paper studies motor joint control of a 4-degree-of-freedom(DoF)robotic manipulator using learning-based Adaptive Dynamic Programming(ADP)approach.The manipulator’s dynamics are modelled as an open-loop 4-link se...This paper studies motor joint control of a 4-degree-of-freedom(DoF)robotic manipulator using learning-based Adaptive Dynamic Programming(ADP)approach.The manipulator’s dynamics are modelled as an open-loop 4-link serial kinematic chain with 4 Degrees of Freedom(DoF).Decentralised optimal controllers are designed for each link using ADP approach based on a set of cost matrices and data collected from exploration trajectories.The proposed control strategy employs an off-line,off-policy iterative approach to derive four optimal control policies,one for each joint,under exploration strategies.The objective of the controller is to control the position of each joint.Simulation and experimental results show that four independent optimal controllers are found,each under similar exploration strategies,and the proposed ADP approach successfully yields optimal linear control policies despite the presence of these complexities.The experimental results conducted on the Quanser Qarm robotic platform demonstrate the effectiveness of the proposed ADP controllers in handling significant dynamic nonlinearities,such as actuation limitations,output saturation,and filter delays.展开更多
Robotic manipulators increasingly operate in complex three-dimensional workspaces where accuracy and strict limits on position,velocity,and acceleration must be satisfied.Conventional geometric planners emphasize path...Robotic manipulators increasingly operate in complex three-dimensional workspaces where accuracy and strict limits on position,velocity,and acceleration must be satisfied.Conventional geometric planners emphasize path smoothness but often ignore dynamic feasibility,motivating control-aware trajectory generation.This study presents a novel model predictive control(MPC)framework for three-dimensional trajectory planning of robotic manipulators that integrates second-order dynamic modeling and multi-objective parameter optimization.Unlike conventional interpolation techniques such as cubic splines,B-splines,and linear interpolation,which neglect physical constraints and system dynamics,the proposed method generates dynamically feasible trajectories by directly optimizing over acceleration inputs while minimizing both tracking error and control effort.A key innovation lies in the use of Pareto front analysis for tuning prediction horizon and sampling time,enabling a systematic balance between accuracy and motion smoothness.Comparative evaluation using simulated experiments demonstrates that the proposed MPC approach achieves a minimum mean absolute error(MAE)of 0.170 and reduces maximum acceleration to 0.0217,compared to 0.0385 in classical linear methods.The maximum deviation error was also reduced by approximately 27.4%relative to MPC configurations without tuned parameters.All experiments were conducted in a simulation environment,with computational times per control cycle consistently remaining below 20 milliseconds,indicating practical feasibility for real-time applications.Thiswork advances the state-of-the-art inMPC-based trajectory planning by offering a scalable and interpretable control architecture that meets physical constraints while optimizing motion efficiency,thus making it suitable for deployment in safety-critical robotic applications.展开更多
Feedforward control is one of the most effective control techniques to increase the robot’s tracking accuracy.However,most of the dynamic models used in the feedforward controllers are linearly simplified such that t...Feedforward control is one of the most effective control techniques to increase the robot’s tracking accuracy.However,most of the dynamic models used in the feedforward controllers are linearly simplified such that the nonlinear and time-varying characteristics of dynamics in the workspace are ignored.In this paper,an iterative tuning method for feedforward control of parallel manipulators by taking nonlinear dynamics into account is proposed.Based on the robot rigid-body dynamic model,a feedforward controller considering the dynamic nonlinearity is presented.An iterative tuning method is given to iteratively update the feedforward controller by minimizing the root mean square(RMS)of the joint errors at each cycle.The effectiveness and extrapolation capability of the proposed method are validated through the experiments on a 2-DOF parallel manipulator.This research proposes an iterative tuning method for feedforward control of parallel manipulators considering nonlinear dynamics,which has better extrapolation capability in the whole workspace of manipulators.展开更多
In this study,we consider a single-link flexible manipulator in the presence of an unknown Bouc-Wen type of hysteresis and intermittent actuator faults.First,an inverse hysteresis dynamics model is introduced,and then...In this study,we consider a single-link flexible manipulator in the presence of an unknown Bouc-Wen type of hysteresis and intermittent actuator faults.First,an inverse hysteresis dynamics model is introduced,and then the control input is divided into an expected input and an error compensator.Second,a novel adaptive neural network-based control scheme is proposed to cancel the unknown input hysteresis.Subsequently,by modifying the adaptive laws and local control laws,a fault-tolerant control strategy is applied to address uncertain intermittent actuator faults in a flexible manipulator system.Through the direct Lyapunov theory,the proposed scheme allows the state errors to asymptotically converge to a specified interval.Finally,the effectiveness of the proposed scheme is verified through numerical simulations and experiments.展开更多
In this paper,a novel cooperative collision avoidance control strategy with relative velocity information for redundant robotic manipulators is derived to guarantee the behavioral safety of robots in the cooperative o...In this paper,a novel cooperative collision avoidance control strategy with relative velocity information for redundant robotic manipulators is derived to guarantee the behavioral safety of robots in the cooperative operational task.This strategy can generate the collision-free trajectory of the robotic links in real-time,which is to realize that the robot can avoid moving obstacles less conservatively and ensure tracking accuracy of terminal end-effector tasks in performing cooperative tasks.For the case where there is interference between the moving obstacle and the desired path of the robotic end-effector,the method inherits the null-space-based self-motion characteristics of the redundant manipulator,integrates the relative motion information,and uses the improved artificial potential field method to design the control items,which are used to generate the collision avoidance motion and carry out moving obstacles smoothly and less conservatively.At the same time,the strategy maintains the kinematic constraint relationship of dual-arm cooperatives,to meet the real-time collision avoidance task under collaborative tasks.Finally,the algorithm simulation indicates that the method can better ensure the tracking accuracy of the end-effector task and carry out moving obstacles smoothly.The experimental results show that the method can generate the real-time collision-free trajectory of the robot in the cooperative handling task,and the joint movement is continuous and stable.展开更多
Grasping is one of the most fundamental operations in modern robotics applications.While deep rein-forcement learning(DRL)has demonstrated strong potential in robotics,there is too much emphasis on maximizing the cumu...Grasping is one of the most fundamental operations in modern robotics applications.While deep rein-forcement learning(DRL)has demonstrated strong potential in robotics,there is too much emphasis on maximizing the cumulative reward in executing tasks,and the potential safety risks are often ignored.In this paper,an optimization method based on safe reinforcement learning(Safe RL)is proposed to address the robotic grasping problem under safety constraints.Specifically,considering the obstacle avoidance constraints of the system,the grasping problem of the manipulator is modeled as a Constrained Markov Decision Process(CMDP).The Lagrange multiplier and a dynamic weighted mechanism are introduced into the Proximal Policy Optimization(PPO)framework,leading to the development of the dynamic weighted Lagrange PPO(DWL-PPO)algorithm.The behavior of violating safety constraints is punished while the policy is optimized in this proposed method.In addition,the orientation control of the end-effector is included in the reward function,and a compound reward function adapted to changes in pose is designed.Ultimately,the efficacy and advantages of the suggested method are proved by extensive training and testing in the Pybullet simulator.The results of grasping experiments reveal that the recommended approach provides superior safety and efficiency compared with other advanced RL methods and achieves a good trade-off between model learning and risk aversion.展开更多
The ammunition loading system manipulator is susceptible to gear failure due to high-frequency,heavyload reciprocating motions and the absence of protective gear components.After a fault occurs,the distribution of fau...The ammunition loading system manipulator is susceptible to gear failure due to high-frequency,heavyload reciprocating motions and the absence of protective gear components.After a fault occurs,the distribution of fault characteristics under different loads is markedly inconsistent,and data is hard to label,which makes it difficult for the traditional diagnosis method based on single-condition training to generalize to different conditions.To address these issues,the paper proposes a novel transfer discriminant neural network(TDNN)for gear fault diagnosis.Specifically,an optimized joint distribution adaptive mechanism(OJDA)is designed to solve the distribution alignment problem between two domains.To improve the classification effect within the domain and the feature recognition capability for a few labeled data,metric learning is introduced to distinguish features from different fault categories.In addition,TDNN adopts a new pseudo-label training strategy to achieve label replacement by comparing the maximum probability of the pseudo-label with the test result.The proposed TDNN is verified in the experimental data set of the artillery manipulator device,and the diagnosis can achieve 99.5%,significantly outperforming other traditional adaptation methods.展开更多
This paper presents a robust finite-time visual servo control strategy for the tracking problem of omni-directional mobile manipulators(OMMs)subject to mismatched disturbances.First,the nonlinear kinematic model of vi...This paper presents a robust finite-time visual servo control strategy for the tracking problem of omni-directional mobile manipulators(OMMs)subject to mismatched disturbances.First,the nonlinear kinematic model of visual servoing for OMMs with mismatched disturbances is explicitly presented to solve the whole-body inverse kinematic problem.Second,a sliding mode observer augmented with an integral terminal sliding mode controller is proposed to handle these uncertainties and ensure that the system converges to a small region around the equilibrium point.The boundary layer technique is employed to mitigate the chattering phenomenon.Furthermore,a strict finite-time Lyapunov stability analysis is conducted.An experimental comparison between the proposed algorithm and a traditional position-based visual servo controller is carried out,and the results demonstrate the superiority of the proposed control algorithm.展开更多
Tracking control of tendon-driven manipulators has become a prevalent research area.However,the existence of flexible elastic tendons generates substantial residual vibrations,resulting in difficulties for trajectory ...Tracking control of tendon-driven manipulators has become a prevalent research area.However,the existence of flexible elastic tendons generates substantial residual vibrations,resulting in difficulties for trajectory tracking control of the manipulator.This paper proposes the radial basis function neural network adaptive hierarchical sliding mode control(RBFNNA-HSMC)method,which combines the dynamic model of the elastic tendon-driven manipulator(ETDM)with radial basis neural network adaptive control and hierarchical sliding mode control technology.The aim is to achieve trajectory tracking control of ETDM even under conditions of model inaccuracy and disturbance.The Lyapunov stability theory demonstrates the stability of the proposed RBFNNA-HSM controller.In order to assess the effectiveness and adaptability of the proposed control method,simulations and experiments were performed on a two-DOF ETDM.The RBFNNA-HSM method shows superior tracking accuracy compared to traditional modelbased HSM control.The experiment shows that the maximum tracking error for ETDM double-joint trajectory tracking is below 2.593×10-3rad and 1.624×10-3rad,respectively.展开更多
Dear Editor,H_(∞)This letter develops a new framework for the robust stability and performance conditions as well as the relevant controller synthesis with respect to uncertain robot manipulators.There often exist mo...Dear Editor,H_(∞)This letter develops a new framework for the robust stability and performance conditions as well as the relevant controller synthesis with respect to uncertain robot manipulators.There often exist model uncertainties between the nominal model and the real robot manipulator and disturbances. Hence, dealing with their effects plays a crucial role in leading to high tracking performances, as discussed in [1]–[5].展开更多
1Introduction Embodied Artificial Intelligence(Embodied AI)has recently become a key research focus[1].It emphasizes agents'abilities to perceive,comprehend,and act in physical worlds to complete tasks.Simulation ...1Introduction Embodied Artificial Intelligence(Embodied AI)has recently become a key research focus[1].It emphasizes agents'abilities to perceive,comprehend,and act in physical worlds to complete tasks.Simulation platforms are essential in this area,as they simulate agent behaviors in set environments and tasks,thereby accelerating algorithm validation and optimization.However,constructing such a platform presents several challenges.展开更多
In space operation,flexible manipulators and gripper mechanisms have been widely used because of light weight and flexibility.However,the vibration caused by slender structures in manipulators and the parameter pertur...In space operation,flexible manipulators and gripper mechanisms have been widely used because of light weight and flexibility.However,the vibration caused by slender structures in manipulators and the parameter perturbation caused by the uncertainty derived from grasping mass variation cannot be ignored.The existence of vibration and parameter perturbation makes the rotation control of flexible manipulators difficult,which seriously affects the operation accuracy of manipulators.What’s more,the complex dynamic coupling brings great challenges to the dynamics modeling and vibration analysis.To solve this problem,this paper takes the space flexible manipulator with an underactuated hand(SFMUH)as the research object.The dynamics model considering flexibility,multiple nonlinear elements and disturbance torque is established by the assumed modal method(AMM)and Hamilton’s principle.A dynamic modeling simplification method is proposed by analyzing the nonlinear terms.What’s more,a sliding mode control(SMC)method combined with the radial basis function(RBF)neural network compensation is proposed.Besides,the control law is designed using a saturation function in the control method to weaken the chatter phenomenon.With the help of neural networks to identify the uncertainty composition in the SFMUH,the tracking accuracy is improved.The results of ground control experiments verify the advantages of the control method for vibration suppression of the SFMUH.展开更多
This paper proposes a new global fixed-time sliding mode control strategy for the trajectory tracking control of uncertain robotic manipulators.First,a fixed-time disturbance observer(FTDO) is designed to deal with th...This paper proposes a new global fixed-time sliding mode control strategy for the trajectory tracking control of uncertain robotic manipulators.First,a fixed-time disturbance observer(FTDO) is designed to deal with the adverse effects of model uncertainties and external disturbances in the manipulator systems.Then an adaptive scheme is used and the adaptive FTDO(AFTDO) is developed,so that the priori knowledge of the lumped disturbance is not required.Further,a new non-singular fast terminal sliding mode(NFTSM) surface is designed by using an arctan function,which helps to overcome the singularity problem and enhance the robustness of the system.Based on the estimation of the lumped disturbance by the AFTDO,a fixed-time non-singular fast terminal sliding mode controller(FTNFTSMC)is developed to guarantee the trajectory tracking errors converge to zero within a fixed time.The settling time is independent of the initial state of the system.In addition,the stability of the AFTDO and FTNFTSMC is strictly proved by using Lyapunov method.Finally,the fixed-time NFESM(FTNFTSM) algorithm is validated on a 2-link manipulator and comparisons with other existing sliding mode controllers(SMCs) are performed.The comparative results confirm that the FTNFTSMC has superior control performance.展开更多
The large manipulator outside the space cabin is a multi-degree of freedom actuator for space operations.In order to realize the automatic control and flexible operation of the space manipulator,a novel spoke structur...The large manipulator outside the space cabin is a multi-degree of freedom actuator for space operations.In order to realize the automatic control and flexible operation of the space manipulator,a novel spoke structure piezoelectric six-dimensional force/torque sensor with redundancy ability,high stiffness and good decoupling performance is innovatively proposed.Based on the deformation coordination relationship,the redundancy measurement mechanism is revealed.The mathematical models of the sensor with and without branch fault are established respectively.The finite element model is established to verify the feasibility of structure and redundancy measuring principle of the sensor.Depending on the theoretical analysis and simulation analysis,the prototype of the sensor is developed.Static and dynamic calibration experiments are carried out.The actual output voltage signal of the six-dimensional force/torque sensor is collected to establish the equation between the standard input applied load and the actual output voltage signal.Based on ant colony optimized BP algorithm,performance indexes of the sensor with and without branch fault are analyzed respectively.The experimental results show that the spoke piezoelectric sixdimensional force/torque sensor with the eight-point support structure has good accuracy and reliability.Meanwhile,it has strong decoupling characteristic that can effectively shield the coupling between dimensions.The nonlinear errors and maximum interference errors of decoupled data with and without branch faults are less than 1% and 2%,respectively.The natural frequency of the sixdimensional force sensor can reach 2856.45 Hz and has good dynamic characteristics.The research content lays a theoretical and experimental foundation for the design,development and application of the new six-dimensional force/torque sensors with redundancy.Meanwhile,it will significantly improve the research level in this field,and provide a strong guarantee for the smooth implementation of force feedback control of the space station manipulator project.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.52275033)National Natural Science Youth Foundation of China(Grant No.52205033)Hebei Provincial Natural Science Foundation of China(Grant No.E2021203019)。
文摘Serial-parallel manipulators are of great interest to academic community in recent years,especially those composed of classical parallel mechanisms.There have been many studies around 2(3RPS)and 2(3SPR)S-PMs,but unfortunately their inverse kinematics have not yet been resolved.This paper discovers that the unknown kinematic parameters of middle platform are responsible for the unresolvable of inverse kinematics,meanwhile the unknown kinematic parameters of middle platform also have huge coupling relationships.Therefore,to break through this challenges,the huge coupling relationships are decoupled layer by layer,the kinematic parameters of middle platform are solved by combining Sylvester's elimination method,and the inverse displacements of 2(3RPS)and 2(3SPR)S-PMs are obtained subsequently.This paper not only solves the inverse kinematics of classical 2(3RPS)and 2(3SPR)S-PMs,but also reveals the essence of the inverse kinematics of general(3-DOF)+(3-DOF)6-DOF S-PMs and proposes a corresponding solution.
基金Supported by National Natural Science Foundation of China(Grant No.52475032)Central Government Guides Local Science and Technology Development Fund Projects(Grant No.246Z2001G)Hebei Provincial Natural Science Foundation Key Projects(Grant No.E2021203125).
文摘The existing research on rescue robots has focused mainly on reconnaissance,detection,and firefighting,and a small number of robots that can achieve human rescue have problems such as poor safety and stability and insufficient carrying capacity.This article addresses the above issues and cleverly combines the advantages of soft robotic arms,underactuated robotic arms,and suction cups based on the principles of bionics.A new design for a robotic arm was proposed,and its working principle was explained.Then,the human rescue process was divided into two stages,and the grasping force of the robotic arm in each stage was analyzed separately.Finally,a prototype of the principle was developed,and the feasibility of the design principle of the robotic arm was verified through grasping experiments on a cross-sectional contour model of the human chest.At the same time,grasping experiments were conducted on different objects to demonstrate the potential application of the robotic arm in grasping ground objects.This research proposes a stress envelope adsorption rescue robot arm inspired by the adhesion ability of the Drosera plant and the stress envelope effect,which can apply force to the entire surface of the human body,reduce local force on the human body,ensure load-bearing capacity and adaptability,and improve the safety and stability of rescue grasping.
基金the National Natural Science Foundation of China(Nos.11832005,12372042,12232011)Young Elite Scientists Sponsorship Program by CAST(No.2022QNRC001)+1 种基金the Fundamental Research Funds for the Central Universities(No.NS2023002)State Key Laboratory of Mechanics and Control for Aerospace Structures(Nanjing University of Aeronautics and Astronautics)(No.MCAS-S-0223K04).
文摘The quantity of space debris on Earth orbit has escalated tremendously in recent years, presenting a significant hazard to human space operations. It is urgent to develop effective measures to capture and remove various space debris. For this purpose, this paper presents a tendon-actuated flexible deployable manipulator. The flexible manipulator consists of several deployable units connected by Cardan joints and actuated by tendons. Compared with the present technologies for capturing space debris such as rigid robotic arm or flying net, this flexible manipulator is deployable, reusable, lightweight and applicable to the capture of large space debris. In order to investigate its deployment dynamics, an accurate dynamic model of the flexible manipulator is established based on the natural coordinate formulation (NCF) and the absolute nodal coordinate formulation (ANCF). Subsequently, numerical simulations are carried out to study the effects of system parameters and the base satellite on its deployment dynamics. Finally, ground experiments for both deployment and bending of the flexible manipulator are conducted to verify its effectiveness and feasibility.
基金Supported by the National Natural Science Foundation of China(No.51905211)the“20 Regulations for New Universities”of Jinan(No.202228116).
文摘The position deviation of the underwater manipulator generated by vortex-induced vibration(VIV)in the shear flow increases relative to that in the uniform flow.Thus,this study established an experimental platform to investigate the vibration characteristics of the underwater manipulator under shear flow.The vibration response along the manipulator was obtained and compared with that in the uniform flow.Results indicated that the velocity,test height,and flow field were the main factors affecting the VIV of the underwater manipulator.With the increase in the reduced velocity(U_(r)),the dimensionless amplitudes increased rapidly in the in-line(IL)direction with a maximum of 0.13D.The vibration responses in the cross-flow(CF)and IL directions were concentrated at positions 2,3 and positions 1,2,with peak values of 0.46 and 0.54 mm under U_(r)=1.54,respectively.In addition,the vibration frequency increased with the reduction of velocity.The dimensionless dominant frequency in the CF and IL directions varied from 0.39-0.80 and 0.35-0.64,respectively.Moreover,the ratio of the CF and IL directions was close to 1 at a lower U_(r).The standard deviation of displacement initially increased and then decreased as the height of the test location increased.The single peak value of the standard deviation showed that VIV presented a single mode.Compared with the uniform flow,the maximum and average values of VIV displacement increased by 104%and 110%under the shear flow,respectively.
基金Supported by National Natural Science Foundation of China(Grant No.52405040)Research Project of State Key Laboratory of Mechanical System and Vibration(Grant No.MSV202514)。
文摘A cable-driven redundant manipulator(CDRM)characterized by redundant degrees of freedom and a lightweight,slender design can perform tasks in confined and restricted spaces efficiently.However,the complex multistage coupling between drive cables and passive joints in CDRM leads to a challenging dynamic model with difficult parameter identification,complicating the efforts to achieve accurate modeling and control.To address these challenges,this paper proposes a dynamic modeling and adaptive control approach tailored for CDRM systems.A multilevel kinematic model of the cable-driven redundant manipulator is presented,and a screw theory is employed to represent the cable tension and cable contact forces as spatial wrenches,which are equivalently mapped to joint torque using the principle of virtual work.This approach simplifies the mapping process while maintaining the integrity of the dynamic model.A recursive method is used to compute cable tension section-by-section for enhancing the efficiency of inverse dynamics calculations and meeting the high-frequency demands of the controller,thereby avoiding large matrix operations.An adaptive control method is proposed building on this foundation,which involves the design of a dynamic parameter adaptive controller in the joint space to simplify the linearization process of the dynamic equations along with a closed-loop controller that incorporates motor parameters in the driving space.This approach improves the control accuracy and dynamic performance of the CDRM under dynamic uncertainties.The accuracy and computational efficiency of the dynamic model are validated through simulations,and the effectiveness of the proposed control method is demonstrated through control tests.This paper presents a dynamic modeling and adaptive control approach for CDRM to enhance accuracy and performance under dynamic uncertainties.
基金the National Natural Science Foundation of China (No. 51905211)China Postdoctoral Science Foundation (Grant No. 2020M672128)+1 种基金University of Jinan Research Startup and Discipline Construction Fund (Grant No.1009435)a Project of the “20 Regulations for New Universities” funding program of Jinan (No.202228116)。
文摘Pulsating flow is a common condition for under water manipulators in Bohai Bay.This study aimed to investigate the effects of pulsation frequency and amplitude on the hydrodynamic characteristics of an underwater manipulator with different postures using the user-defined function (UDF) method. The lift coefficient (C_(L)), drag coefficient (C_(D)), and vortex shedding of the underwater manipulator in single-and dualarm forms were obtained. Results indicated that the maximum increase in the lift and drag coefficients subjected to the pulsation parameters was 24.45%and 28%, respectively, when the fluid flowed past a single arm. Compared with the single arm, the lift and drag coefficients of the arms were higher than those of the single arm when arm 2 was located upstream. Additionally, the pulsation frequency had no obvious effect on the manipulator, but the C_(L) and C_(D) of arm 2 showed an obvious increasing trend with an increase in pulsation amplitude. Meanwhile, when arm 2 was located downstream, the C_(L) and C_(D) of arm 2 were reduced by 16.38%and 1.15%, respectively, with an increase in the pulse frequency,and the maximum increase in the lift and dragcoefficients was 33.33%and 16.78%,respectively,with increasing pulsation amplitude.Moreover, the downstream wake morphology changed significantly, and a combined vortex phenomenon appeared. Finally, a theoretical basis for examining the hydrodynamic characteristics of marine engineering equipment was established to aid future marine resource exploitation.
基金supported by the DEEPCOBOT project under Grant 306640/O70 funded by the Research Council of Norway.
文摘This paper studies motor joint control of a 4-degree-of-freedom(DoF)robotic manipulator using learning-based Adaptive Dynamic Programming(ADP)approach.The manipulator’s dynamics are modelled as an open-loop 4-link serial kinematic chain with 4 Degrees of Freedom(DoF).Decentralised optimal controllers are designed for each link using ADP approach based on a set of cost matrices and data collected from exploration trajectories.The proposed control strategy employs an off-line,off-policy iterative approach to derive four optimal control policies,one for each joint,under exploration strategies.The objective of the controller is to control the position of each joint.Simulation and experimental results show that four independent optimal controllers are found,each under similar exploration strategies,and the proposed ADP approach successfully yields optimal linear control policies despite the presence of these complexities.The experimental results conducted on the Quanser Qarm robotic platform demonstrate the effectiveness of the proposed ADP controllers in handling significant dynamic nonlinearities,such as actuation limitations,output saturation,and filter delays.
基金funded by the research project“BR24992947—Development of Robots,Scientific,Technical,and Software for Flexible Robotization and Industrial Automation(RPA)in Automotive Industrial Enterprises in Kazakhstan Using Artificial Intelligence”.
文摘Robotic manipulators increasingly operate in complex three-dimensional workspaces where accuracy and strict limits on position,velocity,and acceleration must be satisfied.Conventional geometric planners emphasize path smoothness but often ignore dynamic feasibility,motivating control-aware trajectory generation.This study presents a novel model predictive control(MPC)framework for three-dimensional trajectory planning of robotic manipulators that integrates second-order dynamic modeling and multi-objective parameter optimization.Unlike conventional interpolation techniques such as cubic splines,B-splines,and linear interpolation,which neglect physical constraints and system dynamics,the proposed method generates dynamically feasible trajectories by directly optimizing over acceleration inputs while minimizing both tracking error and control effort.A key innovation lies in the use of Pareto front analysis for tuning prediction horizon and sampling time,enabling a systematic balance between accuracy and motion smoothness.Comparative evaluation using simulated experiments demonstrates that the proposed MPC approach achieves a minimum mean absolute error(MAE)of 0.170 and reduces maximum acceleration to 0.0217,compared to 0.0385 in classical linear methods.The maximum deviation error was also reduced by approximately 27.4%relative to MPC configurations without tuned parameters.All experiments were conducted in a simulation environment,with computational times per control cycle consistently remaining below 20 milliseconds,indicating practical feasibility for real-time applications.Thiswork advances the state-of-the-art inMPC-based trajectory planning by offering a scalable and interpretable control architecture that meets physical constraints while optimizing motion efficiency,thus making it suitable for deployment in safety-critical robotic applications.
基金Supported by National Natural Science Foundation of China(Grant No.52375502)EU H2020 MSCA R&I Programme(Grant No.101022696).
文摘Feedforward control is one of the most effective control techniques to increase the robot’s tracking accuracy.However,most of the dynamic models used in the feedforward controllers are linearly simplified such that the nonlinear and time-varying characteristics of dynamics in the workspace are ignored.In this paper,an iterative tuning method for feedforward control of parallel manipulators by taking nonlinear dynamics into account is proposed.Based on the robot rigid-body dynamic model,a feedforward controller considering the dynamic nonlinearity is presented.An iterative tuning method is given to iteratively update the feedforward controller by minimizing the root mean square(RMS)of the joint errors at each cycle.The effectiveness and extrapolation capability of the proposed method are validated through the experiments on a 2-DOF parallel manipulator.This research proposes an iterative tuning method for feedforward control of parallel manipulators considering nonlinear dynamics,which has better extrapolation capability in the whole workspace of manipulators.
基金supported in part by the National Key Research and Development Program of China(2023YFB4706400)the National Natural Science Foundation of China(62273112,62073030,62203161)+6 种基金the Guangdong Basic and Applied Basic Research Foundation(2023B1515120018,2023B1515120019)the Open Project of Xiangjiang Laboratory(23XJ03012)the Natural Science Foundation of Hunan Province(2024JJ5087)the Natural Science Foundation of Jiangxi Province(20232BAB212024)the National Research Foundation of Korea funded by the Ministry of Science and ICT,South Korea(IRIS-2023-00207954)the Science and Technology Planning Project of Guangzhou,China(2023A03J0120)the Guangzhou University Research Project(RC2023037)
文摘In this study,we consider a single-link flexible manipulator in the presence of an unknown Bouc-Wen type of hysteresis and intermittent actuator faults.First,an inverse hysteresis dynamics model is introduced,and then the control input is divided into an expected input and an error compensator.Second,a novel adaptive neural network-based control scheme is proposed to cancel the unknown input hysteresis.Subsequently,by modifying the adaptive laws and local control laws,a fault-tolerant control strategy is applied to address uncertain intermittent actuator faults in a flexible manipulator system.Through the direct Lyapunov theory,the proposed scheme allows the state errors to asymptotically converge to a specified interval.Finally,the effectiveness of the proposed scheme is verified through numerical simulations and experiments.
基金supported in part by the Advanced Equipment Manufacturing Technology Innovation Project of Hebei Province under Grant No.22311801D,23311807D,and 236Z1816Gin part by the National Natural Science Foundation of China under Grant No.U20A20283.
文摘In this paper,a novel cooperative collision avoidance control strategy with relative velocity information for redundant robotic manipulators is derived to guarantee the behavioral safety of robots in the cooperative operational task.This strategy can generate the collision-free trajectory of the robotic links in real-time,which is to realize that the robot can avoid moving obstacles less conservatively and ensure tracking accuracy of terminal end-effector tasks in performing cooperative tasks.For the case where there is interference between the moving obstacle and the desired path of the robotic end-effector,the method inherits the null-space-based self-motion characteristics of the redundant manipulator,integrates the relative motion information,and uses the improved artificial potential field method to design the control items,which are used to generate the collision avoidance motion and carry out moving obstacles smoothly and less conservatively.At the same time,the strategy maintains the kinematic constraint relationship of dual-arm cooperatives,to meet the real-time collision avoidance task under collaborative tasks.Finally,the algorithm simulation indicates that the method can better ensure the tracking accuracy of the end-effector task and carry out moving obstacles smoothly.The experimental results show that the method can generate the real-time collision-free trajectory of the robot in the cooperative handling task,and the joint movement is continuous and stable.
文摘Grasping is one of the most fundamental operations in modern robotics applications.While deep rein-forcement learning(DRL)has demonstrated strong potential in robotics,there is too much emphasis on maximizing the cumulative reward in executing tasks,and the potential safety risks are often ignored.In this paper,an optimization method based on safe reinforcement learning(Safe RL)is proposed to address the robotic grasping problem under safety constraints.Specifically,considering the obstacle avoidance constraints of the system,the grasping problem of the manipulator is modeled as a Constrained Markov Decision Process(CMDP).The Lagrange multiplier and a dynamic weighted mechanism are introduced into the Proximal Policy Optimization(PPO)framework,leading to the development of the dynamic weighted Lagrange PPO(DWL-PPO)algorithm.The behavior of violating safety constraints is punished while the policy is optimized in this proposed method.In addition,the orientation control of the end-effector is included in the reward function,and a compound reward function adapted to changes in pose is designed.Ultimately,the efficacy and advantages of the suggested method are proved by extensive training and testing in the Pybullet simulator.The results of grasping experiments reveal that the recommended approach provides superior safety and efficiency compared with other advanced RL methods and achieves a good trade-off between model learning and risk aversion.
文摘The ammunition loading system manipulator is susceptible to gear failure due to high-frequency,heavyload reciprocating motions and the absence of protective gear components.After a fault occurs,the distribution of fault characteristics under different loads is markedly inconsistent,and data is hard to label,which makes it difficult for the traditional diagnosis method based on single-condition training to generalize to different conditions.To address these issues,the paper proposes a novel transfer discriminant neural network(TDNN)for gear fault diagnosis.Specifically,an optimized joint distribution adaptive mechanism(OJDA)is designed to solve the distribution alignment problem between two domains.To improve the classification effect within the domain and the feature recognition capability for a few labeled data,metric learning is introduced to distinguish features from different fault categories.In addition,TDNN adopts a new pseudo-label training strategy to achieve label replacement by comparing the maximum probability of the pseudo-label with the test result.The proposed TDNN is verified in the experimental data set of the artillery manipulator device,and the diagnosis can achieve 99.5%,significantly outperforming other traditional adaptation methods.
基金supported by the Artificial Intelligence Innovation and Development Special Fund of Shanghai(No.2019RGZN01041)the National Natural Science Foundation of China(No.92048205).
文摘This paper presents a robust finite-time visual servo control strategy for the tracking problem of omni-directional mobile manipulators(OMMs)subject to mismatched disturbances.First,the nonlinear kinematic model of visual servoing for OMMs with mismatched disturbances is explicitly presented to solve the whole-body inverse kinematic problem.Second,a sliding mode observer augmented with an integral terminal sliding mode controller is proposed to handle these uncertainties and ensure that the system converges to a small region around the equilibrium point.The boundary layer technique is employed to mitigate the chattering phenomenon.Furthermore,a strict finite-time Lyapunov stability analysis is conducted.An experimental comparison between the proposed algorithm and a traditional position-based visual servo controller is carried out,and the results demonstrate the superiority of the proposed control algorithm.
基金Supported by Key R&D Project of Zhejiang(Grant No.2022C02052)。
文摘Tracking control of tendon-driven manipulators has become a prevalent research area.However,the existence of flexible elastic tendons generates substantial residual vibrations,resulting in difficulties for trajectory tracking control of the manipulator.This paper proposes the radial basis function neural network adaptive hierarchical sliding mode control(RBFNNA-HSMC)method,which combines the dynamic model of the elastic tendon-driven manipulator(ETDM)with radial basis neural network adaptive control and hierarchical sliding mode control technology.The aim is to achieve trajectory tracking control of ETDM even under conditions of model inaccuracy and disturbance.The Lyapunov stability theory demonstrates the stability of the proposed RBFNNA-HSM controller.In order to assess the effectiveness and adaptability of the proposed control method,simulations and experiments were performed on a two-DOF ETDM.The RBFNNA-HSM method shows superior tracking accuracy compared to traditional modelbased HSM control.The experiment shows that the maximum tracking error for ETDM double-joint trajectory tracking is below 2.593×10-3rad and 1.624×10-3rad,respectively.
基金support by “R&D Program for Forest Science Technology(RS-2024-0040 3460)” provided by Korea Forest Service(Korea Forestry Promotion Institute)
文摘Dear Editor,H_(∞)This letter develops a new framework for the robust stability and performance conditions as well as the relevant controller synthesis with respect to uncertain robot manipulators.There often exist model uncertainties between the nominal model and the real robot manipulator and disturbances. Hence, dealing with their effects plays a crucial role in leading to high tracking performances, as discussed in [1]–[5].
基金supported by the National Natural Science Foundation of China(Grant No.62322601).
文摘1Introduction Embodied Artificial Intelligence(Embodied AI)has recently become a key research focus[1].It emphasizes agents'abilities to perceive,comprehend,and act in physical worlds to complete tasks.Simulation platforms are essential in this area,as they simulate agent behaviors in set environments and tasks,thereby accelerating algorithm validation and optimization.However,constructing such a platform presents several challenges.
基金supported by the National Natural Science Foundation of China(No.52275090)the Fundamental Research Funds for the Central Universities(No.N2103025)+1 种基金the National Key Research and Development Program of China(No.2020YFB2007802)the Applied Basic Research Program of Liaoning Province(No.2023JH2/101300159)。
文摘In space operation,flexible manipulators and gripper mechanisms have been widely used because of light weight and flexibility.However,the vibration caused by slender structures in manipulators and the parameter perturbation caused by the uncertainty derived from grasping mass variation cannot be ignored.The existence of vibration and parameter perturbation makes the rotation control of flexible manipulators difficult,which seriously affects the operation accuracy of manipulators.What’s more,the complex dynamic coupling brings great challenges to the dynamics modeling and vibration analysis.To solve this problem,this paper takes the space flexible manipulator with an underactuated hand(SFMUH)as the research object.The dynamics model considering flexibility,multiple nonlinear elements and disturbance torque is established by the assumed modal method(AMM)and Hamilton’s principle.A dynamic modeling simplification method is proposed by analyzing the nonlinear terms.What’s more,a sliding mode control(SMC)method combined with the radial basis function(RBF)neural network compensation is proposed.Besides,the control law is designed using a saturation function in the control method to weaken the chatter phenomenon.With the help of neural networks to identify the uncertainty composition in the SFMUH,the tracking accuracy is improved.The results of ground control experiments verify the advantages of the control method for vibration suppression of the SFMUH.
基金partially supported by the National Natural Science Foundation of China (62322315,61873237)Zhejiang Provincial Natural Science Foundation of China for Distinguished Young Scholars(LR22F030003)+2 种基金the National Key Rearch and Development Funding(2018YFB1403702)the Key Rearch and Development Programs of Zhejiang Province (2023C01224)Major Project of Science and Technology Innovation in Ningbo City (2019B1003)。
文摘This paper proposes a new global fixed-time sliding mode control strategy for the trajectory tracking control of uncertain robotic manipulators.First,a fixed-time disturbance observer(FTDO) is designed to deal with the adverse effects of model uncertainties and external disturbances in the manipulator systems.Then an adaptive scheme is used and the adaptive FTDO(AFTDO) is developed,so that the priori knowledge of the lumped disturbance is not required.Further,a new non-singular fast terminal sliding mode(NFTSM) surface is designed by using an arctan function,which helps to overcome the singularity problem and enhance the robustness of the system.Based on the estimation of the lumped disturbance by the AFTDO,a fixed-time non-singular fast terminal sliding mode controller(FTNFTSMC)is developed to guarantee the trajectory tracking errors converge to zero within a fixed time.The settling time is independent of the initial state of the system.In addition,the stability of the AFTDO and FTNFTSMC is strictly proved by using Lyapunov method.Finally,the fixed-time NFESM(FTNFTSM) algorithm is validated on a 2-link manipulator and comparisons with other existing sliding mode controllers(SMCs) are performed.The comparative results confirm that the FTNFTSMC has superior control performance.
基金supported by the National Natural Science Foundation of China(No.51875250)a Project of Shandong Province Higher Educational Youth Innovation Science and Technology Program,China(No.2019KJB018)a Project of the“20 Regulations for New Universities”Funding Program of Jinan,China(No.202228116)。
文摘The large manipulator outside the space cabin is a multi-degree of freedom actuator for space operations.In order to realize the automatic control and flexible operation of the space manipulator,a novel spoke structure piezoelectric six-dimensional force/torque sensor with redundancy ability,high stiffness and good decoupling performance is innovatively proposed.Based on the deformation coordination relationship,the redundancy measurement mechanism is revealed.The mathematical models of the sensor with and without branch fault are established respectively.The finite element model is established to verify the feasibility of structure and redundancy measuring principle of the sensor.Depending on the theoretical analysis and simulation analysis,the prototype of the sensor is developed.Static and dynamic calibration experiments are carried out.The actual output voltage signal of the six-dimensional force/torque sensor is collected to establish the equation between the standard input applied load and the actual output voltage signal.Based on ant colony optimized BP algorithm,performance indexes of the sensor with and without branch fault are analyzed respectively.The experimental results show that the spoke piezoelectric sixdimensional force/torque sensor with the eight-point support structure has good accuracy and reliability.Meanwhile,it has strong decoupling characteristic that can effectively shield the coupling between dimensions.The nonlinear errors and maximum interference errors of decoupled data with and without branch faults are less than 1% and 2%,respectively.The natural frequency of the sixdimensional force sensor can reach 2856.45 Hz and has good dynamic characteristics.The research content lays a theoretical and experimental foundation for the design,development and application of the new six-dimensional force/torque sensors with redundancy.Meanwhile,it will significantly improve the research level in this field,and provide a strong guarantee for the smooth implementation of force feedback control of the space station manipulator project.
