With the continuous development of society, the application standards for various related technical equipment in the coal mining industry are getting higher and higher. As one of the more commonly used equipment in th...With the continuous development of society, the application standards for various related technical equipment in the coal mining industry are getting higher and higher. As one of the more commonly used equipment in the coal mining industry, explosion-proof diesel engines continue to promote the normal operation of coal mines. However, at the same time, its existing problems are becoming more and more obvious. Only by studying these problems and determining the future development trend of explosion-proof diesel engines can we better promote their application in the coal mining industry. Therefore, this article will carry out specific research and analysis on explosion-proof diesel engines through the overview, application status, existing problems of explosion-proof diesel engines for coal mines, and future development trends of explosion-proof diesel engines for coal mines, hoping to provide better application and development of explosion-proof diesel engines with doing something about it.展开更多
Fuel injection properties,including the injection rate(temporal aspects)and spray behavior(spatial aspects),play a crucial role in the combustion efficiency and emissions of diesel engines.This study investigates the ...Fuel injection properties,including the injection rate(temporal aspects)and spray behavior(spatial aspects),play a crucial role in the combustion efficiency and emissions of diesel engines.This study investigates the effects of different ethanol-biodiesel-diesel(EBD)blends on the injection performance in diesel engines.Experimental tests are conducted to examine key injection parameters,such as spray penetration distance,spray cone angle,and droplet size,alongside an analysis of coupling leakage.The main findings are as follows:(1)The injection behavior of ethanol and diesel differs significantly.The addition of ethanol reduces the density,viscosity,and modulus of elasticity of the fuel mixture.While the injection advance angle,penetration distance,and Sauter mean diameter show minimal changes,the spray cone angle and coupling leakage increase notably.These alterations may disrupt the“fuelair-chamber”matching characteristics of the original engine,potentially affecting performance.(2)In contrast,the injection performance of biodiesel ismore similar to that of diesel.As biodiesel content increases,the density,viscosity,and modulus of elasticity of the blended fuel also grow.Though changes in injection timing,penetration distance,and spray cone angle remain minimal,the Sauter mean diameter experiences a slight increase.The“air-fuel chamber”compatibility of the original engine is largely unaffected,though fuel atomization slightly deteriorates.Blending up to 20%biodiesel and 30%ethanol with diesel effectively compensates for the shortcomings of using single fuels,maintaining favorable injection dynamics while enhancing lubrication and sealing performance of engine components.展开更多
Limiting environmental pollution from exhaust emissions from internal combustion engines includes many measures,including encouraging biofuel use because biofuel is environmentally friendly and renewable.A mixture of ...Limiting environmental pollution from exhaust emissions from internal combustion engines includes many measures,including encouraging biofuel use because biofuel is environmentally friendly and renewable.A mixture of diesel fuel and vegetable oil is a form of biofuel.However,some properties of the mixed fuel,such as viscosity and density,are higher than those of traditional diesel fuel,affecting the injection and combustion process and reducing power and non-optimal toxic emissions,especially soot emissions.This study uses Kiva-3V software to simulate the combustion process of a diesel-vegetable oil mixture in the combustion chamber of a fishing vessel diesel engine with changes in fuel injection timing.The results show that when increasing the fuel injection timing of a diesel-vegetable oil mixture about 1–2 degrees of crankshaft rotation angle before the top dead center compared to diesel fuel injection timing,the engine power increases,and soot emissions decrease compared to no adjustment.The above simulation research results will help orient the experiments conveniently and reduce costs in the future experimental research process to quantify the fuel system adjustment of fishing vessels’diesel engines when using biofuels,including diesel-vegetable oil mixtures.Thus,the engine’s economic indicators will improve,and emissions that pollute the environment will be limited.展开更多
Modifications in fuel spray characteristics fundamentally influence fuel–air mixing dynamics in diesel engines,thereby significantly affecting combustion performance and emission profiles.This study explores the oper...Modifications in fuel spray characteristics fundamentally influence fuel–air mixing dynamics in diesel engines,thereby significantly affecting combustion performance and emission profiles.This study explores the operational behavior of RP-5 aviation kerosene/diesel blended fuels in marine diesel engines.A spray visualization platform based on Mie scattering technology was developed to comparatively analyze the spray characteristics,ignition behavior,and soot emissions of RP-5 aviation kerosene,conventional-35#diesel,and their blends at varying mixing ratios(D100H0,D90H10,D70H30,D50H50,D30H70,D0H100).The findings demonstrate that,under constant injection pressure,aviation kerosene combustion results in a more uniform temperature field,characterized by lower core flame temperatures,broader high-temperature regions,and reduced soot concentrations with spatially homogeneous distribution and no pronounced peaks.In terms of spray dynamics,increasing the proportion of aviation kerosene leads to a marked widening of the spray cone angle.Meanwhile,spray penetration length exhibits a non-monotonic trend—initially decreasing and subsequently increasing—as the kerosene blending ratio rises.展开更多
Misfire is a common fault in compression ignition engines,characterized by the absence or flame loss due to insufficient fuel in the cylinders.This fault is difficult to diagnose and resolve due to its multiple potent...Misfire is a common fault in compression ignition engines,characterized by the absence or flame loss due to insufficient fuel in the cylinders.This fault is difficult to diagnose and resolve due to its multiple potential causes.This study focuses on identifying misfires in a 12-cylinder V-type marine diesel engine by analyzing vibration data collected from 15 accelerometers mounted on the engine block.Three machine learning algorithms—K-Nearest Neighbors(K-NNs),support vector machines(SVMs),and random forests(RFs)—were employed to classify engine conditions using 18 time-domain features.Results showed that the K-NN,SVM and RF algorithms achieved F1 scores of 99.87%,100%,and 99.87%,respectively,when using 18 time-domain features and all 15 accelerometers mounted on the engine block.Additionally,the study evaluated classification performance while reducing the number of accelerometers and features using two methods:Relief-F and general combinatory analysis(GCA).Although the GCA method yields better results when using only two accelerometers and nine features for misfire classification,its overall process required substantially more computational time compared to Relief-F.The best result obtained with Relief-F was achieved using 3 accelerometers and 18 features.Therefore,Relief-F proved to be more practical and take less overall computational time within the proposed framework.展开更多
Chinese diesel trucks are the main contributors to NOx and particulate matter(PM)vehicle emissions.An increase in diesel trucks could aggravate air pollution and damage human health.The Chinese government has recently...Chinese diesel trucks are the main contributors to NOx and particulate matter(PM)vehicle emissions.An increase in diesel trucks could aggravate air pollution and damage human health.The Chinese government has recently implemented a series of emission control technologies andmeasures for air quality improvement.This paper summarizes recent control technologies and measures for diesel truck emissions in China and introduces the comprehensive application of control technologies and measures in Beijing-Tianjin-Hebei and surrounding regions.Remote onlinemonitoring technology has been adopted according to the China VI standard for heavy-duty diesel trucks,and control measures such as transportation structure adjustment and heavy pollution enterprise classification control continue to support the battle action plan for pollution control.Perspectives and suggestions are provided for promoting pollution control and supervision of diesel truck emissions:adhere to the concept of overall management and control,vigorously promote the application of systematic and technological means in emission monitoring,continuously facilitate cargo transportation structure adjustment and promote new energy freight vehicles.This paper aims to accelerate the implementation of control technologies and measures throughout China.China is endeavouring to control diesel truck exhaust pollution.China is willing to cooperate with the world to protect the global ecological environment.展开更多
Biodiesel is a clean and renewable energy,and it is an effective measure to optimize engine combustion fueled with biodiesel to meet the increasingly strict toxic and CO_(2) emission regulations of internal combustion...Biodiesel is a clean and renewable energy,and it is an effective measure to optimize engine combustion fueled with biodiesel to meet the increasingly strict toxic and CO_(2) emission regulations of internal combustion engines.A suitable-scale chemical kinetic mechanism is very crucial for the accurate and rapid prediction of engine combustion and emissions.However,most previous researchers developed the mechanism of blend fuels through the separate simplification and merging of the reduced mechanisms of diesel and biodiesel rather than considering their cross-reaction.In this study,a new reduced chemical reaction kinetics mechanism of diesel and biodiesel was constructed through the adoption of directed relationship graph (DRG),directed relationship graph with error propagation,and full-species sensitivity analysis (FSSA).N-heptane and methyl decanoate (MD) were selected as surrogates of traditional diesel and biodiesel,respectively.In this mechanism,the interactions between the intermediate products of both fuels were considered based on the cross-reaction theory.Reaction pathways were revealed,and the key species involved in the oxidation of n-heptane and MD were identified through sensitivity analyses.The reduced mechanism of n-heptane/MD consisting of 288 species and 800 reactions was developed and sufficiently verified by published experimental data.Prediction maps of ignition delay time were established at a wide range of parameter matrices (temperature from 600 to 1 700 K,pressure from 10 bar to 80 bar,equivalence ratio from 0.5 to 1.5) and different substitution ratios to identify the occurrence regions of the crossreaction.Concentration and sensitivity analyses were then conducted to further investigate the effects of cross-reactions.The results indicate temperature as the primary factor causing cross-reactivity.In addition,the reduced mechanism with cross-reactions was more accurate than that without cross-reactions.At 700–1 000 K,the cross-reactions inhibited the consumption of n-heptane/MD,which resulted in a prolonged ignition delay time.At this point,the elementary reaction,NC_(7)H_(16)+OH<=>C_(7)H_(15)-2+H_(2)O,played a dominant role in fuel consumption.Specifically,the contribution of the MD consumption reaction to ignition decreased,and the increased generation time of OH,HO_(2),and H_(2)O_(2) was directly responsible for the increased ignition delay.展开更多
The addition of cold flow improvers(CFIs)is considered as the optimum strategy to improve the cold flow properties(CFPs)of diesel fuels,but this strategy is always limited by the required large dosage.To obtain low-do...The addition of cold flow improvers(CFIs)is considered as the optimum strategy to improve the cold flow properties(CFPs)of diesel fuels,but this strategy is always limited by the required large dosage.To obtain low-dosage and high-efficiency CFIs for diesel,1,2,3,6-tetrahydrophthalic anhydride(THPA)was introduced as a third and polar monomer to enhance the depressive effects of alkyl methacrylatetrans anethole copolymers(C_(14)MC-TA).The terpolymers of alkyl methacrylate-trans anethole-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-TA-THPA)were synthesized and compared with the binary copolymers of C_(14)MC-TA and alkyl methacrylate-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-THPA).Results showed that C_(14)MC-THPA achieved the best depressive effects on the cold filter plugging point(CFPP)and solid point(SP)by 11℃and 16℃at a dosage of 1250 mg/L and monomer ratio of 6:1,while 1500mg/L C_(14)MC-TA(1:1)reached the optimal depressive effects on the CFPP and SP by 12℃and 18℃.THPA introduction significantly improved the depressive effects of C_(14)MC-TA.Lower dosages of C_(14)MCTA-THPA in diesel exerted better improvement effects on the CFPP and SP than that of C_(14)MC-TA and C_(14)MC-THPA.When the monomer ratio and dosage were 6:0.6:0.4 and 1000 mg/L,the improvement effect of C_(14)MC-TA-THPA on diesel reached the optimum level,and the CFPP and SP were reduced by 13℃and 19℃,respectively.A 3D nonlinear surface diagram fitted by a mathematical model was also used for the first time to better understand the relationships of monomer ratios,dosages,and depressive effects of CFIs in diesel.Surface analysis results showed that C_(14)MC-TA-THPA achieved the optimum depressive effects at a monomer ratio of 6:0.66:0.34 and dosage of 1000 mg/L,and the CFPP and SP decreased by 14℃ and 19℃,respectively.The predicted results were consistent with the actual ones.Additionally,the improvement mechanism of these copolymers in diesel was also explored.展开更多
To enhance power supply reliability and reduce customer outage time,Mobile Emergency Power Supply Vehicles(MEPSVs),including Mobile Diesel Generator Vehicles(MDGVs)and Mobile Energy Storage Vehicles(MESVs),have become...To enhance power supply reliability and reduce customer outage time,Mobile Emergency Power Supply Vehicles(MEPSVs),including Mobile Diesel Generator Vehicles(MDGVs)and Mobile Energy Storage Vehicles(MESVs),have become indispensable sources for grid maintenance and disaster response.However,in practice,relying solely on MESVs is constrained by battery capacity,making it difficult to meet long-duration power demands.Conversely,using only MDGVs often results in low efficiency and high fuel consumption under fluctuating load conditions,posing challenges to achieving economical and efficient power supply.To address these issues,this paper investigates the parallel power supply architecture of MDGV and MESV,and develops control models for diesel generator and energy storage converter.A fuel-minimization-oriented power distribution strategy is proposed for coordinated operation,aiming to minimize fuel consumption while maintaining the energy storage state of charge(SOC)within a reasonable range.Furthermore,a voltage–frequency control strategy is employed for the energy storage converter,while active power control is applied to the diesel generator.Through adaptive operation mode switching,the proposed strategy enables efficient and cost-effective parallel operation of MDGV and MESV,ensuring long-duration power supply across a wide load range.This approach overcomes the limitations of conventional single-source power supplymethods and provides an effective control solution for the intelligent and efficient operation of emergency power supply systems.Finally,the feasibility of the proposed strategy is verified through simulation and further demonstrated by experiments on a hardware platform.展开更多
The current work includes a numerical investigation of the effect of biodiesel blends with different aluminum oxide nanoparticle concentrations on the combustion process in the cylinder of a diesel engine.IC Engine Fl...The current work includes a numerical investigation of the effect of biodiesel blends with different aluminum oxide nanoparticle concentrations on the combustion process in the cylinder of a diesel engine.IC Engine Fluent,a specialist computational tool in the ANSYS software,was used to simulate internal combustion engine dynamics and combustion processes.Numerical analysis was carried out using biodiesel blends with three Al_(2)O_(3) nanoparticles in 50,100,and 150 ppm concentrations.The tested samples are called D100,B20,B20A50,B20A100,and B20A150 accordingly.The modeling runs were carried out at various engine loads of 0,100,and 200 Nm at a rated speed of 1800 rpm.The combustion characteristics are improved due to the catalytic effect and higher surface area of nano additives.The results showed the improvements in the combustion process as the result of nanoparticle addition,which led to the higher peak cylinder pressure.The increases in the peak cylinder pressures for B20A50,B20A100,and B20A150 about B20 were 3%,5%,and 8%,respectively,at load 200 Nm.The simulation found that the maximum temperature for biodiesel blends diesel was higher than pure diesel;this was due to higher hydrocarbon values of B20.Also,nano-additives caused a decrease in temperatures in the combustion of biofuels.展开更多
This study introduces a novel core-shell structured composite,Cu/SSZ-13@CeO_(2),designed to boost the catalyst’s resistance to hydrothermal conditions.Characterization results reveal that encapsulating Cu/SSZ-13 with...This study introduces a novel core-shell structured composite,Cu/SSZ-13@CeO_(2),designed to boost the catalyst’s resistance to hydrothermal conditions.Characterization results reveal that encapsulating Cu/SSZ-13 with a ceria(CeO_(2))shell markedly enhances hydrothermal stability by maintaining the functionality of[Cu(OH)]+active sites and averting their deactivation.Furthermore,the CeO_(2) shell substantially prevents the loss of crucial Lewis and Bronsted acid sites,essential for effective SCR performance.A significant finding is the formation of a"Ce-O-Al"bond between the CeO_(2) shell and the Cu/SSZ-13 core,which plays a crucial role in reinforcing the structural stability of the zeolite framework.These insights contribute significantly to the development of robust anti-hydrothermal aging catalysts for mobile SCR applications,heralding the advancement of more efficient SCR catalyst technologies.展开更多
The emission regulations for heavy-duty diesel engines regarding nitrogen oxide(NO_(x))are becoming increasingly stringent,particularly in relation to cold start cycles.While the twostage selective catalytic reduction...The emission regulations for heavy-duty diesel engines regarding nitrogen oxide(NO_(x))are becoming increasingly stringent,particularly in relation to cold start cycles.While the twostage selective catalytic reduction(SCR)has the potential to achieve ultra-low NO_(x) emissions,several challenges remain,including the accurate prediction of ammonia(NH_(3))storage mass and the co-control of the two-stage SCR.The first step in this study involved the establishment of a rapid control prototype platform to facilitate the development and validation of a two-stage SCR control strategy.Secondly,an initial method for predicting the NH_(3) storage based on the mass conservation law was proposed,which was subsequently improved by filling and emptying experiments.The third step involved the development of a two-stage SCR co-control strategy,including obtaining the steady-state NH_(3) storage target value,dynamic correction for NH_(3) storage target value,regulation of NH_(3) storage,and control of the close-coupled SCR urea injector state.Finally,the two-stage SCR urea injection control strategy was certified under the world harmonized transient cycle(WHTC).The results demonstrate that the composite value of engine outlet NO_(x) emissions under cold and hot start WHTC cycles is 13 g/(kW·h).Meanwhile,the composite value of tailpipe NO_(x) emissions under cold and hot start WHTC cycles is 0.065 g/(kW·h),representing only 14%of the EU VI limit value of 0.46 g/(kW·h).Thus,the findings demonstrate that integrating an accurate NH_(3) storage prediction method with the two-stage SCR co-control function is crucial for heavy-duty diesel engines to achieve ultra-low NO_(x) emissions.展开更多
An irreversible simplified model for the air standard Diesel cycle is established in this paper. This model takes into account the finite-time evolution of the cycle’s compression and power strokes and it considers g...An irreversible simplified model for the air standard Diesel cycle is established in this paper. This model takes into account the finite-time evolution of the cycle’s compression and power strokes and it considers global losses lumped in a friction like term. The relations between the power output and the compression ratio, and between the thermal efficiency and the compression ratio are derived. Numerical example leads to loop-shaped power versus efficiency cures as is common to almost all real heat engines.展开更多
Platinum/cerium-zirconium-sulfate（Pt/Ce-Zr-SO_4^（2-）） catalysts were prepared by wetness impregnation.Catalytic activities were evaluated from the combustion of propene and CO.Sulfate（SO_4^（2-））addition improv...Platinum/cerium-zirconium-sulfate（Pt/Ce-Zr-SO_4^（2-）） catalysts were prepared by wetness impregnation.Catalytic activities were evaluated from the combustion of propene and CO.Sulfate（SO_4^（2-））addition improved the catalytic activity significantly.When using Pt/Ce-Zr-SO_4^（2-） with 10 wt%SO_4^（2-）,the temperature for 90%conversion of propene and CO decreased by 75℃ compared with Pt/Ce-Zr.The conversion exceeded 95%at 240℃ even after 0.02%sulfur dioxide poisoning for 20 h.Temperature-programmed desorption of CO and X-ray photoelectron spectroscopy analyses revealed an improvement in Pt dispersion onto the Ce-Zr-SO_4^（2-） support,and the increased number of Pt particles built up more Pt^（-）-（SO_4^（2-））^（-） couples,which resulted in excellent activity.The increased total acidity and new Bronsted acid sites on the surface provided the Pt/Ce-Zr-SO_4^（2-） with good sulfur resistance.展开更多
Aim To ivestigate the influence on the cylinder head's stress distribution and value caused by its structure's changes.Methods Three types of cylinder heads of high power diesel engines were analysed with fini...Aim To ivestigate the influence on the cylinder head's stress distribution and value caused by its structure's changes.Methods Three types of cylinder heads of high power diesel engines were analysed with finite element method using I-DEAS Master series software.The actual condition of the cylinder head was simulated with different kinds of elements.Tempera- ture method was used to exert the predeformation of the bolts to the finite element model,so the pretightening force was discribed accurately Results Stress distribution regularities of the cylinder head under different working conditions were taken On the basis,the analysing results ofthreeof design schemes were compared and the optimum structure was taken Conclusion Transition condition between the head plate and the standing board ,shape of the head plate and the jobbing sheet,etc will affect the cylinder head's bearing condition展开更多
Aim To study the diesel engine management spstem (DEMS). The DEMS can consider many engine parameters and so it can acquire the optimum system performance. Methods On the basis of analyzing the characteristics of die...Aim To study the diesel engine management spstem (DEMS). The DEMS can consider many engine parameters and so it can acquire the optimum system performance. Methods On the basis of analyzing the characteristics of diesel engine electronic system, the real-time, multi-tasks system design methods were used for the heavy duty vehicular diesel engine electronic control system . The hardware and software of DEMS were developed. Results and Conalusion By the test on dieSel engine bed, the system was verified and the foundation of the fully developed DEMS was laid.展开更多
Cu-SAPO-34/cordierite catalysts were prepared via one-step hydrothermal synthesis method and their performances to remove NO x from the diesel vehicle exhaust were evaluated. The morphology, structure, Cu content and ...Cu-SAPO-34/cordierite catalysts were prepared via one-step hydrothermal synthesis method and their performances to remove NO x from the diesel vehicle exhaust were evaluated. The morphology, structure, Cu content and valence state were characterized by SEM, XRD, ICP and XPS, respectively. The experimental results show the active component Cu of the catalysts via in situ synthesis could significantly improve the selective catalytic reduction （SCR） activities of NOx and the optimal Cu content is in the range of 0.30%-0.40%（mass fraction）. No N 2 O is detected by gas chromatograph （GC） during the evaluation process, which implies that NOx is almost entirely converted to N2 over Cu-SAPO-34/cordierite catalyst. The conversion rate of NOx to N2 by NH3 over catalyst could almost be up to 100%in the temperature range of 300-670 ℃with a space velocity of 12000 h-1 and it is still more than 60% at 300-620 ℃ under 36000 h-1. The catalysts also show the good hydrothermal and chemical stability at the atmosphere with H 2 O.展开更多
Aim The particle texture from diesel engine was imitated by use of computer. Methods The theory of fractal geometry and the diffusion limited aggregation model were used to simulate the micron texture. Results The...Aim The particle texture from diesel engine was imitated by use of computer. Methods The theory of fractal geometry and the diffusion limited aggregation model were used to simulate the micron texture. Results The fractal dimensions of granule distribution and corpuscle superficial area are quite conformed with those of measurement. Conclusion The texture parameters of engine particle cluster can be obtained precisely by use of fractal theory.展开更多
文摘With the continuous development of society, the application standards for various related technical equipment in the coal mining industry are getting higher and higher. As one of the more commonly used equipment in the coal mining industry, explosion-proof diesel engines continue to promote the normal operation of coal mines. However, at the same time, its existing problems are becoming more and more obvious. Only by studying these problems and determining the future development trend of explosion-proof diesel engines can we better promote their application in the coal mining industry. Therefore, this article will carry out specific research and analysis on explosion-proof diesel engines through the overview, application status, existing problems of explosion-proof diesel engines for coal mines, and future development trends of explosion-proof diesel engines for coal mines, hoping to provide better application and development of explosion-proof diesel engines with doing something about it.
基金supported by Innovation Research Project for the training of high-level scientific and technological talents(Technical expert talents)of the Armed Police Force ZZKY20222415“13th Five-Year Plan”military key colleges and key disciplines-Equipment Engineering(Power)-17.
文摘Fuel injection properties,including the injection rate(temporal aspects)and spray behavior(spatial aspects),play a crucial role in the combustion efficiency and emissions of diesel engines.This study investigates the effects of different ethanol-biodiesel-diesel(EBD)blends on the injection performance in diesel engines.Experimental tests are conducted to examine key injection parameters,such as spray penetration distance,spray cone angle,and droplet size,alongside an analysis of coupling leakage.The main findings are as follows:(1)The injection behavior of ethanol and diesel differs significantly.The addition of ethanol reduces the density,viscosity,and modulus of elasticity of the fuel mixture.While the injection advance angle,penetration distance,and Sauter mean diameter show minimal changes,the spray cone angle and coupling leakage increase notably.These alterations may disrupt the“fuelair-chamber”matching characteristics of the original engine,potentially affecting performance.(2)In contrast,the injection performance of biodiesel ismore similar to that of diesel.As biodiesel content increases,the density,viscosity,and modulus of elasticity of the blended fuel also grow.Though changes in injection timing,penetration distance,and spray cone angle remain minimal,the Sauter mean diameter experiences a slight increase.The“air-fuel chamber”compatibility of the original engine is largely unaffected,though fuel atomization slightly deteriorates.Blending up to 20%biodiesel and 30%ethanol with diesel effectively compensates for the shortcomings of using single fuels,maintaining favorable injection dynamics while enhancing lubrication and sealing performance of engine components.
文摘Limiting environmental pollution from exhaust emissions from internal combustion engines includes many measures,including encouraging biofuel use because biofuel is environmentally friendly and renewable.A mixture of diesel fuel and vegetable oil is a form of biofuel.However,some properties of the mixed fuel,such as viscosity and density,are higher than those of traditional diesel fuel,affecting the injection and combustion process and reducing power and non-optimal toxic emissions,especially soot emissions.This study uses Kiva-3V software to simulate the combustion process of a diesel-vegetable oil mixture in the combustion chamber of a fishing vessel diesel engine with changes in fuel injection timing.The results show that when increasing the fuel injection timing of a diesel-vegetable oil mixture about 1–2 degrees of crankshaft rotation angle before the top dead center compared to diesel fuel injection timing,the engine power increases,and soot emissions decrease compared to no adjustment.The above simulation research results will help orient the experiments conveniently and reduce costs in the future experimental research process to quantify the fuel system adjustment of fishing vessels’diesel engines when using biofuels,including diesel-vegetable oil mixtures.Thus,the engine’s economic indicators will improve,and emissions that pollute the environment will be limited.
基金supported by Innovation Research Project for the training of high-level scientific and technological talents(Technical expert talents)of the Armed Police Force ZZKY20222415Research and Innovation Team in Marine Propulsion Technology,China Coast Guard Academy.
文摘Modifications in fuel spray characteristics fundamentally influence fuel–air mixing dynamics in diesel engines,thereby significantly affecting combustion performance and emission profiles.This study explores the operational behavior of RP-5 aviation kerosene/diesel blended fuels in marine diesel engines.A spray visualization platform based on Mie scattering technology was developed to comparatively analyze the spray characteristics,ignition behavior,and soot emissions of RP-5 aviation kerosene,conventional-35#diesel,and their blends at varying mixing ratios(D100H0,D90H10,D70H30,D50H50,D30H70,D0H100).The findings demonstrate that,under constant injection pressure,aviation kerosene combustion results in a more uniform temperature field,characterized by lower core flame temperatures,broader high-temperature regions,and reduced soot concentrations with spatially homogeneous distribution and no pronounced peaks.In terms of spray dynamics,increasing the proportion of aviation kerosene leads to a marked widening of the spray cone angle.Meanwhile,spray penetration length exhibits a non-monotonic trend—initially decreasing and subsequently increasing—as the kerosene blending ratio rises.
文摘Misfire is a common fault in compression ignition engines,characterized by the absence or flame loss due to insufficient fuel in the cylinders.This fault is difficult to diagnose and resolve due to its multiple potential causes.This study focuses on identifying misfires in a 12-cylinder V-type marine diesel engine by analyzing vibration data collected from 15 accelerometers mounted on the engine block.Three machine learning algorithms—K-Nearest Neighbors(K-NNs),support vector machines(SVMs),and random forests(RFs)—were employed to classify engine conditions using 18 time-domain features.Results showed that the K-NN,SVM and RF algorithms achieved F1 scores of 99.87%,100%,and 99.87%,respectively,when using 18 time-domain features and all 15 accelerometers mounted on the engine block.Additionally,the study evaluated classification performance while reducing the number of accelerometers and features using two methods:Relief-F and general combinatory analysis(GCA).Although the GCA method yields better results when using only two accelerometers and nine features for misfire classification,its overall process required substantially more computational time compared to Relief-F.The best result obtained with Relief-F was achieved using 3 accelerometers and 18 features.Therefore,Relief-F proved to be more practical and take less overall computational time within the proposed framework.
基金supported by the National Key Research and Development Project (No.2022YFB2602001)the National Research Program for Key Issues in Air Pollution Control (No.DQGG0207).
文摘Chinese diesel trucks are the main contributors to NOx and particulate matter(PM)vehicle emissions.An increase in diesel trucks could aggravate air pollution and damage human health.The Chinese government has recently implemented a series of emission control technologies andmeasures for air quality improvement.This paper summarizes recent control technologies and measures for diesel truck emissions in China and introduces the comprehensive application of control technologies and measures in Beijing-Tianjin-Hebei and surrounding regions.Remote onlinemonitoring technology has been adopted according to the China VI standard for heavy-duty diesel trucks,and control measures such as transportation structure adjustment and heavy pollution enterprise classification control continue to support the battle action plan for pollution control.Perspectives and suggestions are provided for promoting pollution control and supervision of diesel truck emissions:adhere to the concept of overall management and control,vigorously promote the application of systematic and technological means in emission monitoring,continuously facilitate cargo transportation structure adjustment and promote new energy freight vehicles.This paper aims to accelerate the implementation of control technologies and measures throughout China.China is endeavouring to control diesel truck exhaust pollution.China is willing to cooperate with the world to protect the global ecological environment.
基金Supported by the National Natural Science Foundation of China (Grant No. 52171298)the National Foreign Experts Program (G2023180006L)+1 种基金the Natural Science Foundation of Heilongjiang Province of China (Grant No. ZD2019E003)the Fundamental Research Funds for the Central Universities (Grant No. 3072022TS0303)。
文摘Biodiesel is a clean and renewable energy,and it is an effective measure to optimize engine combustion fueled with biodiesel to meet the increasingly strict toxic and CO_(2) emission regulations of internal combustion engines.A suitable-scale chemical kinetic mechanism is very crucial for the accurate and rapid prediction of engine combustion and emissions.However,most previous researchers developed the mechanism of blend fuels through the separate simplification and merging of the reduced mechanisms of diesel and biodiesel rather than considering their cross-reaction.In this study,a new reduced chemical reaction kinetics mechanism of diesel and biodiesel was constructed through the adoption of directed relationship graph (DRG),directed relationship graph with error propagation,and full-species sensitivity analysis (FSSA).N-heptane and methyl decanoate (MD) were selected as surrogates of traditional diesel and biodiesel,respectively.In this mechanism,the interactions between the intermediate products of both fuels were considered based on the cross-reaction theory.Reaction pathways were revealed,and the key species involved in the oxidation of n-heptane and MD were identified through sensitivity analyses.The reduced mechanism of n-heptane/MD consisting of 288 species and 800 reactions was developed and sufficiently verified by published experimental data.Prediction maps of ignition delay time were established at a wide range of parameter matrices (temperature from 600 to 1 700 K,pressure from 10 bar to 80 bar,equivalence ratio from 0.5 to 1.5) and different substitution ratios to identify the occurrence regions of the crossreaction.Concentration and sensitivity analyses were then conducted to further investigate the effects of cross-reactions.The results indicate temperature as the primary factor causing cross-reactivity.In addition,the reduced mechanism with cross-reactions was more accurate than that without cross-reactions.At 700–1 000 K,the cross-reactions inhibited the consumption of n-heptane/MD,which resulted in a prolonged ignition delay time.At this point,the elementary reaction,NC_(7)H_(16)+OH<=>C_(7)H_(15)-2+H_(2)O,played a dominant role in fuel consumption.Specifically,the contribution of the MD consumption reaction to ignition decreased,and the increased generation time of OH,HO_(2),and H_(2)O_(2) was directly responsible for the increased ignition delay.
基金supported from the Natural Science Foundation Project of Shanghai(Nos.23ZR1425300 and 22ZR1426100)Experimental Technical Team Construction Project of Shanghai Education Commission(No.10110N230080)+1 种基金National Natural Science Foundation of China(No.22075183)Research and Innovation Project of Shanghai Municipal Education Commission(No.2023ZKZD54).
文摘The addition of cold flow improvers(CFIs)is considered as the optimum strategy to improve the cold flow properties(CFPs)of diesel fuels,but this strategy is always limited by the required large dosage.To obtain low-dosage and high-efficiency CFIs for diesel,1,2,3,6-tetrahydrophthalic anhydride(THPA)was introduced as a third and polar monomer to enhance the depressive effects of alkyl methacrylatetrans anethole copolymers(C_(14)MC-TA).The terpolymers of alkyl methacrylate-trans anethole-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-TA-THPA)were synthesized and compared with the binary copolymers of C_(14)MC-TA and alkyl methacrylate-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-THPA).Results showed that C_(14)MC-THPA achieved the best depressive effects on the cold filter plugging point(CFPP)and solid point(SP)by 11℃and 16℃at a dosage of 1250 mg/L and monomer ratio of 6:1,while 1500mg/L C_(14)MC-TA(1:1)reached the optimal depressive effects on the CFPP and SP by 12℃and 18℃.THPA introduction significantly improved the depressive effects of C_(14)MC-TA.Lower dosages of C_(14)MCTA-THPA in diesel exerted better improvement effects on the CFPP and SP than that of C_(14)MC-TA and C_(14)MC-THPA.When the monomer ratio and dosage were 6:0.6:0.4 and 1000 mg/L,the improvement effect of C_(14)MC-TA-THPA on diesel reached the optimum level,and the CFPP and SP were reduced by 13℃and 19℃,respectively.A 3D nonlinear surface diagram fitted by a mathematical model was also used for the first time to better understand the relationships of monomer ratios,dosages,and depressive effects of CFIs in diesel.Surface analysis results showed that C_(14)MC-TA-THPA achieved the optimum depressive effects at a monomer ratio of 6:0.66:0.34 and dosage of 1000 mg/L,and the CFPP and SP decreased by 14℃ and 19℃,respectively.The predicted results were consistent with the actual ones.Additionally,the improvement mechanism of these copolymers in diesel was also explored.
基金funded by the Science and Technology Project of State Grid Jiangsu Electric Power Co.,Ltd.(Project No.J2024136).
文摘To enhance power supply reliability and reduce customer outage time,Mobile Emergency Power Supply Vehicles(MEPSVs),including Mobile Diesel Generator Vehicles(MDGVs)and Mobile Energy Storage Vehicles(MESVs),have become indispensable sources for grid maintenance and disaster response.However,in practice,relying solely on MESVs is constrained by battery capacity,making it difficult to meet long-duration power demands.Conversely,using only MDGVs often results in low efficiency and high fuel consumption under fluctuating load conditions,posing challenges to achieving economical and efficient power supply.To address these issues,this paper investigates the parallel power supply architecture of MDGV and MESV,and develops control models for diesel generator and energy storage converter.A fuel-minimization-oriented power distribution strategy is proposed for coordinated operation,aiming to minimize fuel consumption while maintaining the energy storage state of charge(SOC)within a reasonable range.Furthermore,a voltage–frequency control strategy is employed for the energy storage converter,while active power control is applied to the diesel generator.Through adaptive operation mode switching,the proposed strategy enables efficient and cost-effective parallel operation of MDGV and MESV,ensuring long-duration power supply across a wide load range.This approach overcomes the limitations of conventional single-source power supplymethods and provides an effective control solution for the intelligent and efficient operation of emergency power supply systems.Finally,the feasibility of the proposed strategy is verified through simulation and further demonstrated by experiments on a hardware platform.
文摘The current work includes a numerical investigation of the effect of biodiesel blends with different aluminum oxide nanoparticle concentrations on the combustion process in the cylinder of a diesel engine.IC Engine Fluent,a specialist computational tool in the ANSYS software,was used to simulate internal combustion engine dynamics and combustion processes.Numerical analysis was carried out using biodiesel blends with three Al_(2)O_(3) nanoparticles in 50,100,and 150 ppm concentrations.The tested samples are called D100,B20,B20A50,B20A100,and B20A150 accordingly.The modeling runs were carried out at various engine loads of 0,100,and 200 Nm at a rated speed of 1800 rpm.The combustion characteristics are improved due to the catalytic effect and higher surface area of nano additives.The results showed the improvements in the combustion process as the result of nanoparticle addition,which led to the higher peak cylinder pressure.The increases in the peak cylinder pressures for B20A50,B20A100,and B20A150 about B20 were 3%,5%,and 8%,respectively,at load 200 Nm.The simulation found that the maximum temperature for biodiesel blends diesel was higher than pure diesel;this was due to higher hydrocarbon values of B20.Also,nano-additives caused a decrease in temperatures in the combustion of biofuels.
基金financially supported by the National Natural Science Foundation of China(No.22176216)the National Engineering Laboratory for Mobile Source Emission Control Technology(No.NELMS2020A13)the National Key Research and Development Program of China(No.SQ2022YFB3500058).
文摘This study introduces a novel core-shell structured composite,Cu/SSZ-13@CeO_(2),designed to boost the catalyst’s resistance to hydrothermal conditions.Characterization results reveal that encapsulating Cu/SSZ-13 with a ceria(CeO_(2))shell markedly enhances hydrothermal stability by maintaining the functionality of[Cu(OH)]+active sites and averting their deactivation.Furthermore,the CeO_(2) shell substantially prevents the loss of crucial Lewis and Bronsted acid sites,essential for effective SCR performance.A significant finding is the formation of a"Ce-O-Al"bond between the CeO_(2) shell and the Cu/SSZ-13 core,which plays a crucial role in reinforcing the structural stability of the zeolite framework.These insights contribute significantly to the development of robust anti-hydrothermal aging catalysts for mobile SCR applications,heralding the advancement of more efficient SCR catalyst technologies.
基金supported by the National Natural Science Foundation of China(No.51921004).
文摘The emission regulations for heavy-duty diesel engines regarding nitrogen oxide(NO_(x))are becoming increasingly stringent,particularly in relation to cold start cycles.While the twostage selective catalytic reduction(SCR)has the potential to achieve ultra-low NO_(x) emissions,several challenges remain,including the accurate prediction of ammonia(NH_(3))storage mass and the co-control of the two-stage SCR.The first step in this study involved the establishment of a rapid control prototype platform to facilitate the development and validation of a two-stage SCR control strategy.Secondly,an initial method for predicting the NH_(3) storage based on the mass conservation law was proposed,which was subsequently improved by filling and emptying experiments.The third step involved the development of a two-stage SCR co-control strategy,including obtaining the steady-state NH_(3) storage target value,dynamic correction for NH_(3) storage target value,regulation of NH_(3) storage,and control of the close-coupled SCR urea injector state.Finally,the two-stage SCR urea injection control strategy was certified under the world harmonized transient cycle(WHTC).The results demonstrate that the composite value of engine outlet NO_(x) emissions under cold and hot start WHTC cycles is 13 g/(kW·h).Meanwhile,the composite value of tailpipe NO_(x) emissions under cold and hot start WHTC cycles is 0.065 g/(kW·h),representing only 14%of the EU VI limit value of 0.46 g/(kW·h).Thus,the findings demonstrate that integrating an accurate NH_(3) storage prediction method with the two-stage SCR co-control function is crucial for heavy-duty diesel engines to achieve ultra-low NO_(x) emissions.
文摘An irreversible simplified model for the air standard Diesel cycle is established in this paper. This model takes into account the finite-time evolution of the cycle’s compression and power strokes and it considers global losses lumped in a friction like term. The relations between the power output and the compression ratio, and between the thermal efficiency and the compression ratio are derived. Numerical example leads to loop-shaped power versus efficiency cures as is common to almost all real heat engines.
基金supported by the National Natural Science Foundation of China(21506194,21676255)the Provincial Natural Science Foundation of Zhejiang Province(LY16B070011)the Commission of Science and Technology of Zhejiang Province(2017C33106,2017C03007)~~
文摘Platinum/cerium-zirconium-sulfate（Pt/Ce-Zr-SO_4^（2-）） catalysts were prepared by wetness impregnation.Catalytic activities were evaluated from the combustion of propene and CO.Sulfate（SO_4^（2-））addition improved the catalytic activity significantly.When using Pt/Ce-Zr-SO_4^（2-） with 10 wt%SO_4^（2-）,the temperature for 90%conversion of propene and CO decreased by 75℃ compared with Pt/Ce-Zr.The conversion exceeded 95%at 240℃ even after 0.02%sulfur dioxide poisoning for 20 h.Temperature-programmed desorption of CO and X-ray photoelectron spectroscopy analyses revealed an improvement in Pt dispersion onto the Ce-Zr-SO_4^（2-） support,and the increased number of Pt particles built up more Pt^（-）-（SO_4^（2-））^（-） couples,which resulted in excellent activity.The increased total acidity and new Bronsted acid sites on the surface provided the Pt/Ce-Zr-SO_4^（2-） with good sulfur resistance.
文摘Aim To ivestigate the influence on the cylinder head's stress distribution and value caused by its structure's changes.Methods Three types of cylinder heads of high power diesel engines were analysed with finite element method using I-DEAS Master series software.The actual condition of the cylinder head was simulated with different kinds of elements.Tempera- ture method was used to exert the predeformation of the bolts to the finite element model,so the pretightening force was discribed accurately Results Stress distribution regularities of the cylinder head under different working conditions were taken On the basis,the analysing results ofthreeof design schemes were compared and the optimum structure was taken Conclusion Transition condition between the head plate and the standing board ,shape of the head plate and the jobbing sheet,etc will affect the cylinder head's bearing condition
文摘Aim To study the diesel engine management spstem (DEMS). The DEMS can consider many engine parameters and so it can acquire the optimum system performance. Methods On the basis of analyzing the characteristics of diesel engine electronic system, the real-time, multi-tasks system design methods were used for the heavy duty vehicular diesel engine electronic control system . The hardware and software of DEMS were developed. Results and Conalusion By the test on dieSel engine bed, the system was verified and the foundation of the fully developed DEMS was laid.
基金Project(20906067)supported by the National Natural Science Foundation of ChinaProject(2011M500543)supported by the Postdoctoral Science Foundation of ChinaProject supported by the Program for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi
文摘Cu-SAPO-34/cordierite catalysts were prepared via one-step hydrothermal synthesis method and their performances to remove NO x from the diesel vehicle exhaust were evaluated. The morphology, structure, Cu content and valence state were characterized by SEM, XRD, ICP and XPS, respectively. The experimental results show the active component Cu of the catalysts via in situ synthesis could significantly improve the selective catalytic reduction （SCR） activities of NOx and the optimal Cu content is in the range of 0.30%-0.40%（mass fraction）. No N 2 O is detected by gas chromatograph （GC） during the evaluation process, which implies that NOx is almost entirely converted to N2 over Cu-SAPO-34/cordierite catalyst. The conversion rate of NOx to N2 by NH3 over catalyst could almost be up to 100%in the temperature range of 300-670 ℃with a space velocity of 12000 h-1 and it is still more than 60% at 300-620 ℃ under 36000 h-1. The catalysts also show the good hydrothermal and chemical stability at the atmosphere with H 2 O.
文摘Aim The particle texture from diesel engine was imitated by use of computer. Methods The theory of fractal geometry and the diffusion limited aggregation model were used to simulate the micron texture. Results The fractal dimensions of granule distribution and corpuscle superficial area are quite conformed with those of measurement. Conclusion The texture parameters of engine particle cluster can be obtained precisely by use of fractal theory.
