Gas hydrate decomposition in sediments involves complicated multiphase flow and heat and mass transfer processes because of heat absorption by solid hydrates. Factors affecting gas hydrate decomposition in sediments i...Gas hydrate decomposition in sediments involves complicated multiphase flow and heat and mass transfer processes because of heat absorption by solid hydrates. Factors affecting gas hydrate decomposition in sediments include sediment type, mineral composition, pore size distribution, particle size, pore water composition, hydrate saturation distribution, initial formation pressure and temperature and cement characteristics. In this paper, experimental simulations of gas hydrate decomposition are carried out on an artificial core to investigate the effects of initial pressure and temperature, particle size and pore size. The experiments show that the characteristics of gas hydrate decomposition in sediments differ completely from those in a pure water system. The decomposition rate of hydrate sediments increases with the initial pressure increasing and decreasing temperatures. Furthermore, the decomposition rate of hydrate sediments decreases with decreasing particle size and increasing pore size.展开更多
The present work is intended to simulate, in a rotating annulus of stratified liquid, the me-chanical effect of the Xizang (Tibetan) Plateau on the zonal circulation. The main featuresof three flow patterns around the...The present work is intended to simulate, in a rotating annulus of stratified liquid, the me-chanical effect of the Xizang (Tibetan) Plateau on the zonal circulation. The main featuresof three flow patterns around the plateau for different Rossby number R and rotating Eulernumber E are analysed. and a division diagram of the flow pattern in (R, E) plane is given.It has been found that under the condition that similarity criterions R and E of the experimentalfluid are the same as those existing in the atmosphere for monthly mean states in spring, au-tumn and winter months, the experimental results are satisfied for the following weathersystems over the plateau and its vicinities: the low vortex, trough and shear line over thesoutheast part of the plateau, the tilted ridge over the northwest part of the plateau, the troughpatterns over the upstream and dewnstream of the plateau, the vertical circulation structure, thejets on both north and southeast sides of the plateau, and so on. This shows that the mechanicaleffect of the Tibetan Plateau on the general circulation over East Asia deserves close atten-tion.展开更多
A multi-status Markov chain model is proposed to produce daily rainfall, and based on which extreme rainfall is simulated with the generalized Pareto distribution （GPD）. The simulated daily rainfall shows high preci...A multi-status Markov chain model is proposed to produce daily rainfall, and based on which extreme rainfall is simulated with the generalized Pareto distribution （GPD）. The simulated daily rainfall shows high precision at most stations, especially in pluvial regions of East China. The analysis reveals that the multi- status Markov chain model excels the bi-status Markov chain model in simulating climatic features of extreme rainfall. Results from the selected six stations demonstrate excellent simulations in the following aspects： standard deviation of monthly precipitation, daily maximum precipitation, the monthly mean rainfall days, standard deviation of daily precipitation and mean daily precipitation, which are proved to be consistent with the observations. A comparative study involving 78 stations in East China also reveals good consistency in monthly mean rainfall days and mean daily maximum rainfall, except mean daily rainfall. Simulation results at the above 6 stations have shown satisfactory fitting capability of the extreme precipitation GPD method. Good analogy is also found between simulation and observation in threshold and return values. As the errors of the threshold decrease, so do the differences between the return and real values. All the above demonstrates the applicability of the Markov chain model to extreme rainfall simulations.展开更多
Two measurement techniques are investigated to characterize photodetector linearity. A model for the two-tone and three-tone photodetector systems is developed to thoroughly investigate the influences of setup compone...Two measurement techniques are investigated to characterize photodetector linearity. A model for the two-tone and three-tone photodetector systems is developed to thoroughly investigate the influences of setup components on the measurement results. We demonstrate that small bias shifts from the quadrature point of the modulator will induce deviation into measurement results of the two-tone system, and the simulation results correspond well to experimental and calculation results.展开更多
We take the established inductively coupled plasma(ICP) wind tunnel as a research object to investigate the thermal protection system of re-entry vehicles. A 1.2-MW high power ICP wind tunnel is studied through numeri...We take the established inductively coupled plasma(ICP) wind tunnel as a research object to investigate the thermal protection system of re-entry vehicles. A 1.2-MW high power ICP wind tunnel is studied through numerical simulation and experimental validation. The distribution characteristics and interaction mechanism of the flow field and electromagnetic field of the ICP wind tunnel are investigated using the multi-field coupling method of flow, electromagnetic, chemical, and thermodynamic field. The accuracy of the numerical simulation is validated by comparing the experimental results with the simulation results. Thereafter, the wind tunnel pressure, air velocity, electron density, Joule heating rate, Lorentz force, and electric field intensity obtained using the simulation are analyzed and discussed. The results indicate that for the 1.2-MW ICP wind tunnel, the maximum values of temperature, pressure, electron number density, and other parameters are observed during coil heating. The influence of the radial Lorentz force on the momentum transfer is stronger than that of the axial Lorentz force. The electron number density at the central axis and the amplitude and position of the Joule heating rate are affected by the radial Lorentz force. Moreover, the plasma in the wind tunnel is constantly in the subsonic flow state, and a strong eddy flow is easily generated at the inlet of the wind tunnel.展开更多
A new experiment was made on the developing of bed separations and mining subsidence from Tangshan T2192 working face by equivalent materials simulation.The overburden deformation and the developing of bed separations...A new experiment was made on the developing of bed separations and mining subsidence from Tangshan T2192 working face by equivalent materials simulation.The overburden deformation and the developing of bed separations with working face advanc- ing was simulated by a new model.The results show that the maximum value of bed separations moved forward gradually along with the working face advancing;the maxi- mum value of bed separations is 0.31～0.50 times of mining thickness.The key strata have a great influence upon surface subsidence during the overburden movement process.The mechanics parameters of new experiment are fitted with results in fields perfectly.展开更多
The integrated hydraulic transformer has a compact structure and no throttling loss in the process of pressure regulation.It is widely used in the common pressure rail hydrostatic transmission system.The integrated hy...The integrated hydraulic transformer has a compact structure and no throttling loss in the process of pressure regulation.It is widely used in the common pressure rail hydrostatic transmission system.The integrated hydraulic transformer is realized by designing more than three ports on the distribution plate,and the voltage transformation characteristics of the integrated hydraulic transformer with different port numbers are different.In this paper,the influence of port number on the pressure ratio of integrated hydraulic transformer was studied,and the pressure ratio characteristics of 3⁃ports,4⁃ports,and 5⁃ports integrated hydraulic transformer were obtained,and an experimental platform was built for experimental verification,which shows that the simulation results are consistent with the experimental results and provides a theoretical basis for the design of integrated hydraulic transformer.展开更多
To address the challenges in studying the pore formation and evolution processes,and unclear preservation mechanisms of deep to ultra-deep carbonate rocks,a high-temperature and high-pressure visualization simulation ...To address the challenges in studying the pore formation and evolution processes,and unclear preservation mechanisms of deep to ultra-deep carbonate rocks,a high-temperature and high-pressure visualization simulation experimental device was developed for ultra-deep carbonate reservoirs.Carbonate rock samples from the Sichuan Basin and Tarim Basin were used to simulate the dissolution-precipitation process of deep to ultra-deep carbonate reservoirs in an analogous geological setting.This unit comprises four core modules:an ultra-high temperature,high pressure triaxial stress core holder module(temperature higher than 300°C,pressure higher than 150 MPa),a multi-stage continuous flow module with temperature-pressure regulation,an ultra-high temperature-pressure sapphire window cell and an in-situ high-temperature-pressure fluid property measurement module and real-time ultra-high temperature-pressure permeability detection module.The new experimental device was used for simulation experiment,the geological insights were obtained in three aspects.First,the pore-throat structure of carbonate is controlled by lithology and initial pore-throat structure,and fluid type,concentration and dissolution duration determine the degree of dissolution.The dissolution process exhibits two evolution patterns.The dissolution scale is positively correlated to the temperature and pressure,and the pore-forming peak period aligns well with the hydrocarbon generation peak period.Second,the dissolution potential of dolomite in an open flow system is greater than that of limestone,and secondary dissolved pores formed continuously are controlled by the type and concentration of acidic fluids and the initial physical properties.These pores predominantly distribute along pre-existing pore/fracture zones.Third,in a nearly closed diagenetic system,after the chemical reaction between acidic fluids and carbonate rock reaches saturation and dynamic equilibrium,the pore structure no longer changes,keeping pre-existing pores well-preserved.These findings have important guiding significance for the evaluation of pore-throat structure and development potential of deep to ultra-deep carbonate reservoirs,and the prediction of main controlling factors and distribution of high-quality carbonate reservoirs.展开更多
[Objective]The aim was to study the simulation test of hydrodynamics process of erosion.[Method]Through the runoff scouring experiment,the property of soil erosion in Damaoqi grassland in Inner Mongolia was studied.Th...[Objective]The aim was to study the simulation test of hydrodynamics process of erosion.[Method]Through the runoff scouring experiment,the property of soil erosion in Damaoqi grassland in Inner Mongolia was studied.The process and mechanism of soil erosion were studied.[Result]The results of runoff scouring experiment on inner Damaoqi steppe showed that the mean flow velocity of change slope increased with the discharge of flow and slope gradient.The mean silt content rate,the mean sediment transport rate and the mean sheer stress all increased when the discharge of flow increased,which changed in parabolic form with the increase of slope gradient and the critical gradient is 25°.The relationship between the mean sediment transport rate and the mean sheer stress was linear.[Conclusion]The study provided theoretic basis for the report of soil erosion in grassland in China.展开更多
In the university physics teaching, the application of virtual simulation experiment technology can provide reliable technical support for teachers. If teachers only use the traditional oral teaching method, the teach...In the university physics teaching, the application of virtual simulation experiment technology can provide reliable technical support for teachers. If teachers only use the traditional oral teaching method, the teaching effect is not ideal. Because the physics subject contains many experiments, if students cannot watch the experiment process, students thinking ability and practical ability will be affected. However, under the constraints of teaching conditions, some physics experiments cannot be carried out. With the help of virtual simulation experiment technology, under the virtual simulation experiment, the simulation degree is high and the operation is relatively simple, also has the advantage of safety and risk-free, to compensate for the deficiency of the traditional teaching methods. To a certain extent, also can innovate teaching methods, students can fully observe the physical phenomenon operation process, help students to master the corresponding knowledge. This paper expounds the characteristics of virtual simulation experiment and the application principles of virtual simulation technology in university physics experiment teaching, and proposes the application strategy of this technology.展开更多
Virtual simulation experiment,as a new way to promote the digital transformation of education,has a broad development prospect and application value.The civil engineering experimental volume and space are huge,it has ...Virtual simulation experiment,as a new way to promote the digital transformation of education,has a broad development prospect and application value.The civil engineering experimental volume and space are huge,it has a long construction period,is highly dangerous,and is difficult to experiment with.In order to solve the contradiction between the traditional theory teaching of civil engineering and the engineering training of students,the construction of virtual simulation experimental teaching courses with a high degree of realism,intuition,and accuracy can be used as a useful supplement and innovation of experimental and practical teaching.This paper takes the virtual simulation experimental teaching course of urban overpasses as an example,introduces the necessity and practicability of the course construction,and describes the experimental principle structure of the course,the simulation scene design,the experimental teaching process,the experimental method,etc.The course has achieved good application results,and it has been recognized as the first-class virtual simulation teaching course of the Chongqing Municipal Government,which provides certain references to the construction of the same type of courses in the civil engineering profession.展开更多
With the rapid development of information technology and the increasing complexity of the financial market,the teaching methods and means of the Securities Investment course in universities are facing new challenges a...With the rapid development of information technology and the increasing complexity of the financial market,the teaching methods and means of the Securities Investment course in universities are facing new challenges and opportunities.The purpose of this paper is to discuss the application and construction path of virtual simulation experimental teaching in the Securities Investment course.Firstly,it analyses the problems existing in the teaching of traditional securities investment courses,such as the disconnection between theory and practice and the single teaching mode.In order to solve these problems,this paper puts forward the necessity of introducing virtual simulation experimental teaching and details the specific application path of virtual simulation experimental teaching in the Securities Investment course.展开更多
Most of the existing studies on tunnel blast wave are based on spherical or grouped charges, however,conventional weapons are mostly cylindrical rather than spherical. In order to analyze the impact of cylindrical cha...Most of the existing studies on tunnel blast wave are based on spherical or grouped charges, however,conventional weapons are mostly cylindrical rather than spherical. In order to analyze the impact of cylindrical charges on the tunnel blast wave loads and to develop a quantitative calculation method, this study carried out experimental and numerical research. Initially, external explosion experiments were conducted using both 35 kg spherical charges and cylindrical charges with aspect ratio of 4.8 at two different distances from the tunnel entrance. Comparative analysis of the blast wave parameters in the tunnel revealed that the explosive equivalent of the cylindrical charges was significantly higher than that of the spherical charges. To address this, an equivalent coefficient κ based on the spherical charges was proposed for the cylindrical charges. Subsequently, numerical simulations were conducted for the experimental conditions, and the numerical simulation results match the experiments well. Through numerical calculations, the reliability of the equivalent coefficient κ under the experimental conditions was verified, and comparison analysis indicated that the explosion energy of cylindrical charges spreads more radially, resulting in more explosion energy entering the tunnel, which is the fundamental reason for the increase in tunnel blast wave loads. Additionally, analyzing the explosion energy ratio entering the tunnel is an effective method for calculating the equivalent coefficient κ. Finally, through more than one hundred sets of numerical calculation results, the impact of the proportional distance λ and the ratio of charge mass to the tunnel cross-section dimension φ on the equivalence coefficients κ was investigated. An empirical formula for the equivalence coefficient κ was derived through fitting, and the accuracy of the formula was validated through literature experimental results. The research findings of this paper will provide valuable guidance for the calculation of blast wave loads in tunnel.展开更多
In this study,the hydraulic behavior and sand transport efficiency of the siphon automatic sand discharge device were studied by software simulation tests.By simulating the actual situation,this study analyzed how fac...In this study,the hydraulic behavior and sand transport efficiency of the siphon automatic sand discharge device were studied by software simulation tests.By simulating the actual situation,this study analyzed how factors such as the difference in water level,sediment concentration,and pipeline layout affected the sediment discharge effect.The results show that the sediment discharge device can effectively discharge sediment under diverse operating conditions and show adaptability to different environmental conditions,which indicates that it is suitable for various types of reservoir environments.展开更多
In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates t...In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates the vertical growth process of strike-slip faults through field outcrop observations in the Keping area,interpretation of seismic data from the Fuman Oilfield,Tarim Basim,NW China,and structural physical simulation experiments.The results are obtained mainly in four aspects.First,field outcrops and ultra-deep seismic profiles indicate a three-layer structure within the strike-slip fault,consisting of fault core,fracture zone and primary rock.The fault core can be classified into three parts vertically:fracture-cavity unit,fault clay and breccia zone.The distribution of fracture-cavity units demonstrates a distinct pattern of vertical stratification,owing to the structural characteristics and growth process of the slip-strike fault.Second,the ultra-deep seismic profiles show multiple fracture-cavity units in the strike-slip fault zone.These units can be classified into four types:top fractured,middle connected,deep terminated,and intra-layer fractured.Third,structural physical simulation experiments and ultra-deep seismic data interpretation reveal that the strike-slip faults have evolved vertically in three stages:segmental rupture,vertical growth,and connection and extension.The particle image velocimetry detection demonstrates that the initial fracture of the fault zone occurred at the top or bottom and then evolved into cavities gradually along with the fault growth,accompanied by the emergence of new fractures in the middle part of the strata,which subsequently connected with the deep and shallow cavities to form a complete fault zone.Fourth,the ultra-deep carbonate strata primarily develop three types of fractured-cavity reservoirs:flower-shaped fracture,large and deep fault and staggered overlap.The first two types are larger in size with better reservoir conditions,suggesting a significant exploration potential.展开更多
Thiadiamondoids(TDs)have recently attracted increasing attention as molecular proxies for thermochemical sulfate reduction(TSR)reactions in reservoirs.However,their formation mechanisms,as well as the generation and e...Thiadiamondoids(TDs)have recently attracted increasing attention as molecular proxies for thermochemical sulfate reduction(TSR)reactions in reservoirs.However,their formation mechanisms,as well as the generation and evolution processes,remain poorly understood.In this study,simulation experiments with a duration of 160 h were conducted on the model compound 1,3-dimethyladamantane(1,3-DMA)using the CaSO_(4),MgSO_(4),and elemental S systems,with measurements at the 10th,20th,40th,80th and 160th hours during the simulation process being presented.The results indicate that at the end of simulation,the MgSO_(4) system exhibited the lowest residual amounts of 1,3-DMA,suggesting the highest degree of TSR.Four types of non-hydrocarbon compounds with adamantane structures were detected in the liquid products in the three experiment systems:adamantanones,adamantanols,adamantanethiols(ATs),and thiaadamantanes(TAs).Among these,adamantanones exhibited the highest concentrations in the three simulation systems.In addition,TAs were dominated by C_(3)-TAs in the CaSO_(4) and MgSO_(4) systems and by C_(2)-TAs in the elemental S system.The simulation experiments revealed a strong correlation between the concentrations of TAs and adamantanones,suggesting that adamantanones might be the intermediates for TAs.Combined with the synthesis mechanism of TAs from thiaadamamantane-4,8-dione,TDs might have two different genetic mechanisms:(a)low temperature cationic carbon ion rearrangement from diagenesis to early catagenesis stage,and(b)a free sulfur radical mechanism in high-temperature TSR process during middle-late catagenesis.TAs exhibited different generation and evolution processes across different experiment systems.Notably,the MgSO_(4) system revealed that TAs undergo generation,accumulation,and destruction process,corresponding to Easy%Ro values of 0.89%-0.98%,0.98%-1.21%,and>1.21%,respectively.Among these three simulation systems,dibenzothiophenes(DBTs)concentrations consistently trended upwards,indicating TAs have lower thermal stability than DBTs.展开更多
On the basis of analyzing the fluid phase behavior during the transformation from gas reservoir to gas storage,a mathematical model and an experimental simulation method are established to describe the oil-gas phase b...On the basis of analyzing the fluid phase behavior during the transformation from gas reservoir to gas storage,a mathematical model and an experimental simulation method are established to describe the oil-gas phase behavior during the whole injection-production process of gas storage.The underground gas storage in the Liaohe Shuang 6 gas reservoir with oil rim is taken as a typical example to verify the reliability and accuracy of the mathematical model and reveal characteristics and mechanisms of fluid phase behavior.In the gas injection stage of the gas storage,the phase behavior is characterized by mainly evaporation and extraction and secondarily dissolution and diffusion of gas in the cap to oil in the oil rim of the reservoir;the gas in gas cap increases in light component content,decreases in contents of intermediate and heavy components,and increases in density and viscosity.The oil of the ring decreases in content of heavy components,increases in contents of light and intermediate components,decreases in density and viscosity,and increases in volume factor and solution gas oil ratio.In the stable operation stage of periodic injection-production of gas storage,the phase behavior shows that the evaporation and extraction capacity of injection gas in the cap to oil rim is weakened step by step,the phase behavior gradually changes into dissolution and diffusion.The gas in gas cap decreases in content of intermediate components,increases in content of light components slowly,and becomes lighter;but changes hardly in density and viscosity.The oil in the oil rim increases in content of heavy components,decreases in content of intermediate components,rises in density and viscosity,and drops in volume factor and solution gas oil ratio.展开更多
The mechanism of fracture initiation is the basic issue for hydraulic fracture technology. Because of the huge differences in fracture initiation mechanisms for different reservoirs,some successful fracturing techniqu...The mechanism of fracture initiation is the basic issue for hydraulic fracture technology. Because of the huge differences in fracture initiation mechanisms for different reservoirs,some successful fracturing techniques applied to porosity reservoirs are ineffectual for fractured reservoirs.Laboratory tests using a process simulation device were performed to confirm the characteristics of fracture initiation and propagation in different reservoirs.The influences of crustal stress field,confining pressure,and natural fractures on the fracture initiation and propagation are discussed.Experimental results demonstrate that stress concentration around the hole would significantly increase the fracture pressure of the rock.At the same time,natural fractures in the borehole wall would eliminate the stress concentration,which leads to a decrease in the fracture initiation pressure.展开更多
Soil cracking is an important process influencing water and solutes transport in the Yuanmou Dry-hot Valley region of Southwest China. Studying the morphological development of soil cracks helps to further reveal the ...Soil cracking is an important process influencing water and solutes transport in the Yuanmou Dry-hot Valley region of Southwest China. Studying the morphological development of soil cracks helps to further reveal the close relationship between the soil cracking process and water movement in such semi-arid regions. Here we report regular changes on surface morphology of soil cracks with decreasing water in four different soils (Typ-Ustic Ferrisols,Ver-Ustic Ferrisols,Tru-Ustic Vertisols and Typ-Ustic Vertisols) through simulation experiments. Our results indicate the following: 1) Different soils ultimately have different development degrees of soil cracks,according to their various values of crack area density. Soil cracks in Typ-Ustic Ferrisols can only develop to the feeble degree,while those in the other three soils are capable of developing into the intensive degree,and even into the extremely intensive degree. 2) Soil crack complexity,as expressed by the value of the area-weighted mean of crack fractal dimension (AWMFRAC),is found to continuously decrease as a whole through the whole cracking process in all the studied soils. 3) Soil crack connectivity shows a uniform trend in the studied soils,that is to say,connectivity gradually increases with soil crack development.展开更多
It＇s very important to simulate impact load of debris flow effectively and to investigate dynamic response of architectures under dynamic impact of debris flow, which are necessary to design disaster mitigation const...It＇s very important to simulate impact load of debris flow effectively and to investigate dynamic response of architectures under dynamic impact of debris flow, which are necessary to design disaster mitigation construction. Firstly, reinforced concrete domestic architectures in mountain areas of western China had been chosen as main architecture style. The bearing load style and the destructed shape of reinforced flamed construction impacted by discontinuous viscous debris flow were studied systematically. Secondly, Jiangjia Ravine debris flow valley in Yunnan Province, China had been chosen as research region. Utilizing based data from fieldwork and practical survey, the authors simulated and calculated theoretically impact force of discontinuous viscous debris flow. Thirdly, an impact data collecting system （IMHE IDCS） was designed and developed to fulfill designed simulation experiments. Finally, a series of impact test of researched structure models had been fulfilled. During experiment, the destructed shape and course of models were observed and the dynamic displacement data and main natural frequency data of models were collected and analyzed.展开更多
基金supported by the National Basic Research Program of China (Grant No. 2009CB219507)
文摘Gas hydrate decomposition in sediments involves complicated multiphase flow and heat and mass transfer processes because of heat absorption by solid hydrates. Factors affecting gas hydrate decomposition in sediments include sediment type, mineral composition, pore size distribution, particle size, pore water composition, hydrate saturation distribution, initial formation pressure and temperature and cement characteristics. In this paper, experimental simulations of gas hydrate decomposition are carried out on an artificial core to investigate the effects of initial pressure and temperature, particle size and pore size. The experiments show that the characteristics of gas hydrate decomposition in sediments differ completely from those in a pure water system. The decomposition rate of hydrate sediments increases with the initial pressure increasing and decreasing temperatures. Furthermore, the decomposition rate of hydrate sediments decreases with decreasing particle size and increasing pore size.
文摘The present work is intended to simulate, in a rotating annulus of stratified liquid, the me-chanical effect of the Xizang (Tibetan) Plateau on the zonal circulation. The main featuresof three flow patterns around the plateau for different Rossby number R and rotating Eulernumber E are analysed. and a division diagram of the flow pattern in (R, E) plane is given.It has been found that under the condition that similarity criterions R and E of the experimentalfluid are the same as those existing in the atmosphere for monthly mean states in spring, au-tumn and winter months, the experimental results are satisfied for the following weathersystems over the plateau and its vicinities: the low vortex, trough and shear line over thesoutheast part of the plateau, the tilted ridge over the northwest part of the plateau, the troughpatterns over the upstream and dewnstream of the plateau, the vertical circulation structure, thejets on both north and southeast sides of the plateau, and so on. This shows that the mechanicaleffect of the Tibetan Plateau on the general circulation over East Asia deserves close atten-tion.
基金the National Natural Science Foundation of China under Grant No.40875058the Major Fundamental Research Program of Natural Science Foundation of Jiangsu Higher Education Institutions of China under Grant No.07KJA17020.
文摘A multi-status Markov chain model is proposed to produce daily rainfall, and based on which extreme rainfall is simulated with the generalized Pareto distribution （GPD）. The simulated daily rainfall shows high precision at most stations, especially in pluvial regions of East China. The analysis reveals that the multi- status Markov chain model excels the bi-status Markov chain model in simulating climatic features of extreme rainfall. Results from the selected six stations demonstrate excellent simulations in the following aspects： standard deviation of monthly precipitation, daily maximum precipitation, the monthly mean rainfall days, standard deviation of daily precipitation and mean daily precipitation, which are proved to be consistent with the observations. A comparative study involving 78 stations in East China also reveals good consistency in monthly mean rainfall days and mean daily maximum rainfall, except mean daily rainfall. Simulation results at the above 6 stations have shown satisfactory fitting capability of the extreme precipitation GPD method. Good analogy is also found between simulation and observation in threshold and return values. As the errors of the threshold decrease, so do the differences between the return and real values. All the above demonstrates the applicability of the Markov chain model to extreme rainfall simulations.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61574019,61674018 and 61674020the Fund of State Key Laboratory of Information Photonics and Optical Communicationsthe Specialized Research Fund for the Doctoral Program of Higher Education of China under Grant No 20130005130001
文摘Two measurement techniques are investigated to characterize photodetector linearity. A model for the two-tone and three-tone photodetector systems is developed to thoroughly investigate the influences of setup components on the measurement results. We demonstrate that small bias shifts from the quadrature point of the modulator will induce deviation into measurement results of the two-tone system, and the simulation results correspond well to experimental and calculation results.
基金supported by the National Natural Science Foundation of China (Grant No. 11705143)the Open Foundation for Key Laboratories of National Defense Science and Technology of China (Grant No. 6142202031901)the Foundation for Research and Development of Applied Technology in Beilin District of Xi’an,China (Grant No. GX2047)。
文摘We take the established inductively coupled plasma(ICP) wind tunnel as a research object to investigate the thermal protection system of re-entry vehicles. A 1.2-MW high power ICP wind tunnel is studied through numerical simulation and experimental validation. The distribution characteristics and interaction mechanism of the flow field and electromagnetic field of the ICP wind tunnel are investigated using the multi-field coupling method of flow, electromagnetic, chemical, and thermodynamic field. The accuracy of the numerical simulation is validated by comparing the experimental results with the simulation results. Thereafter, the wind tunnel pressure, air velocity, electron density, Joule heating rate, Lorentz force, and electric field intensity obtained using the simulation are analyzed and discussed. The results indicate that for the 1.2-MW ICP wind tunnel, the maximum values of temperature, pressure, electron number density, and other parameters are observed during coil heating. The influence of the radial Lorentz force on the momentum transfer is stronger than that of the axial Lorentz force. The electron number density at the central axis and the amplitude and position of the Joule heating rate are affected by the radial Lorentz force. Moreover, the plasma in the wind tunnel is constantly in the subsonic flow state, and a strong eddy flow is easily generated at the inlet of the wind tunnel.
基金The National Natural Science Funds Committee(50174035)
文摘A new experiment was made on the developing of bed separations and mining subsidence from Tangshan T2192 working face by equivalent materials simulation.The overburden deformation and the developing of bed separations with working face advanc- ing was simulated by a new model.The results show that the maximum value of bed separations moved forward gradually along with the working face advancing;the maxi- mum value of bed separations is 0.31～0.50 times of mining thickness.The key strata have a great influence upon surface subsidence during the overburden movement process.The mechanics parameters of new experiment are fitted with results in fields perfectly.
基金the National Key Research and Development Plan Projects(Grant No.2018YFB2001200)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(Grant Nos.19KJB460026,19KJA140002)the Six Talent Peak Training Projects in Jiangsu Province(Grant No.JXQC-36).
文摘The integrated hydraulic transformer has a compact structure and no throttling loss in the process of pressure regulation.It is widely used in the common pressure rail hydrostatic transmission system.The integrated hydraulic transformer is realized by designing more than three ports on the distribution plate,and the voltage transformation characteristics of the integrated hydraulic transformer with different port numbers are different.In this paper,the influence of port number on the pressure ratio of integrated hydraulic transformer was studied,and the pressure ratio characteristics of 3⁃ports,4⁃ports,and 5⁃ports integrated hydraulic transformer were obtained,and an experimental platform was built for experimental verification,which shows that the simulation results are consistent with the experimental results and provides a theoretical basis for the design of integrated hydraulic transformer.
基金Supported by the Joint Fund for Enterprise Innovation and Development of the National Natural Science Foundation of China(U23B20154)General Program of the National Natural Science Foundation of China(42372169)。
文摘To address the challenges in studying the pore formation and evolution processes,and unclear preservation mechanisms of deep to ultra-deep carbonate rocks,a high-temperature and high-pressure visualization simulation experimental device was developed for ultra-deep carbonate reservoirs.Carbonate rock samples from the Sichuan Basin and Tarim Basin were used to simulate the dissolution-precipitation process of deep to ultra-deep carbonate reservoirs in an analogous geological setting.This unit comprises four core modules:an ultra-high temperature,high pressure triaxial stress core holder module(temperature higher than 300°C,pressure higher than 150 MPa),a multi-stage continuous flow module with temperature-pressure regulation,an ultra-high temperature-pressure sapphire window cell and an in-situ high-temperature-pressure fluid property measurement module and real-time ultra-high temperature-pressure permeability detection module.The new experimental device was used for simulation experiment,the geological insights were obtained in three aspects.First,the pore-throat structure of carbonate is controlled by lithology and initial pore-throat structure,and fluid type,concentration and dissolution duration determine the degree of dissolution.The dissolution process exhibits two evolution patterns.The dissolution scale is positively correlated to the temperature and pressure,and the pore-forming peak period aligns well with the hydrocarbon generation peak period.Second,the dissolution potential of dolomite in an open flow system is greater than that of limestone,and secondary dissolved pores formed continuously are controlled by the type and concentration of acidic fluids and the initial physical properties.These pores predominantly distribute along pre-existing pore/fracture zones.Third,in a nearly closed diagenetic system,after the chemical reaction between acidic fluids and carbonate rock reaches saturation and dynamic equilibrium,the pore structure no longer changes,keeping pre-existing pores well-preserved.These findings have important guiding significance for the evaluation of pore-throat structure and development potential of deep to ultra-deep carbonate reservoirs,and the prediction of main controlling factors and distribution of high-quality carbonate reservoirs.
基金Supported by the Scientific Research Program of China Institute of Water Resources and Hydropower Research (MKS2010001)
文摘[Objective]The aim was to study the simulation test of hydrodynamics process of erosion.[Method]Through the runoff scouring experiment,the property of soil erosion in Damaoqi grassland in Inner Mongolia was studied.The process and mechanism of soil erosion were studied.[Result]The results of runoff scouring experiment on inner Damaoqi steppe showed that the mean flow velocity of change slope increased with the discharge of flow and slope gradient.The mean silt content rate,the mean sediment transport rate and the mean sheer stress all increased when the discharge of flow increased,which changed in parabolic form with the increase of slope gradient and the critical gradient is 25°.The relationship between the mean sediment transport rate and the mean sheer stress was linear.[Conclusion]The study provided theoretic basis for the report of soil erosion in grassland in China.
文摘In the university physics teaching, the application of virtual simulation experiment technology can provide reliable technical support for teachers. If teachers only use the traditional oral teaching method, the teaching effect is not ideal. Because the physics subject contains many experiments, if students cannot watch the experiment process, students thinking ability and practical ability will be affected. However, under the constraints of teaching conditions, some physics experiments cannot be carried out. With the help of virtual simulation experiment technology, under the virtual simulation experiment, the simulation degree is high and the operation is relatively simple, also has the advantage of safety and risk-free, to compensate for the deficiency of the traditional teaching methods. To a certain extent, also can innovate teaching methods, students can fully observe the physical phenomenon operation process, help students to master the corresponding knowledge. This paper expounds the characteristics of virtual simulation experiment and the application principles of virtual simulation technology in university physics experiment teaching, and proposes the application strategy of this technology.
基金Chongqing Institute of Technology’s 2022 Virtual Simulation Experiment“Golden Course”Construction Project“Virtual Simulation Experiment of Urban Overpass Vehicle Passage”2023 Teaching Method Reform and“Information Technology+”Smart Teaching Special Research Project Information Technology Multi-Dimensional Research Results of“Enabling Virtual Simulation Experiment Smart Teaching Reform and Practice”。
文摘Virtual simulation experiment,as a new way to promote the digital transformation of education,has a broad development prospect and application value.The civil engineering experimental volume and space are huge,it has a long construction period,is highly dangerous,and is difficult to experiment with.In order to solve the contradiction between the traditional theory teaching of civil engineering and the engineering training of students,the construction of virtual simulation experimental teaching courses with a high degree of realism,intuition,and accuracy can be used as a useful supplement and innovation of experimental and practical teaching.This paper takes the virtual simulation experimental teaching course of urban overpasses as an example,introduces the necessity and practicability of the course construction,and describes the experimental principle structure of the course,the simulation scene design,the experimental teaching process,the experimental method,etc.The course has achieved good application results,and it has been recognized as the first-class virtual simulation teaching course of the Chongqing Municipal Government,which provides certain references to the construction of the same type of courses in the civil engineering profession.
基金The 2024 Hankou University School-Level Teaching Reform Research Project“Research on the Application of Virtual Simulation Experimental Teaching in the Course of Securities Investment”(Project number:2024JY43)。
文摘With the rapid development of information technology and the increasing complexity of the financial market,the teaching methods and means of the Securities Investment course in universities are facing new challenges and opportunities.The purpose of this paper is to discuss the application and construction path of virtual simulation experimental teaching in the Securities Investment course.Firstly,it analyses the problems existing in the teaching of traditional securities investment courses,such as the disconnection between theory and practice and the single teaching mode.In order to solve these problems,this paper puts forward the necessity of introducing virtual simulation experimental teaching and details the specific application path of virtual simulation experimental teaching in the Securities Investment course.
文摘Most of the existing studies on tunnel blast wave are based on spherical or grouped charges, however,conventional weapons are mostly cylindrical rather than spherical. In order to analyze the impact of cylindrical charges on the tunnel blast wave loads and to develop a quantitative calculation method, this study carried out experimental and numerical research. Initially, external explosion experiments were conducted using both 35 kg spherical charges and cylindrical charges with aspect ratio of 4.8 at two different distances from the tunnel entrance. Comparative analysis of the blast wave parameters in the tunnel revealed that the explosive equivalent of the cylindrical charges was significantly higher than that of the spherical charges. To address this, an equivalent coefficient κ based on the spherical charges was proposed for the cylindrical charges. Subsequently, numerical simulations were conducted for the experimental conditions, and the numerical simulation results match the experiments well. Through numerical calculations, the reliability of the equivalent coefficient κ under the experimental conditions was verified, and comparison analysis indicated that the explosion energy of cylindrical charges spreads more radially, resulting in more explosion energy entering the tunnel, which is the fundamental reason for the increase in tunnel blast wave loads. Additionally, analyzing the explosion energy ratio entering the tunnel is an effective method for calculating the equivalent coefficient κ. Finally, through more than one hundred sets of numerical calculation results, the impact of the proportional distance λ and the ratio of charge mass to the tunnel cross-section dimension φ on the equivalence coefficients κ was investigated. An empirical formula for the equivalence coefficient κ was derived through fitting, and the accuracy of the formula was validated through literature experimental results. The research findings of this paper will provide valuable guidance for the calculation of blast wave loads in tunnel.
基金Supported by the National Undergraduate Innovation Training Program(Project No.202211437036).
文摘In this study,the hydraulic behavior and sand transport efficiency of the siphon automatic sand discharge device were studied by software simulation tests.By simulating the actual situation,this study analyzed how factors such as the difference in water level,sediment concentration,and pipeline layout affected the sediment discharge effect.The results show that the sediment discharge device can effectively discharge sediment under diverse operating conditions and show adaptability to different environmental conditions,which indicates that it is suitable for various types of reservoir environments.
基金Supported by the National Natural Science Foundation of China(42362026)Key R&D Project of Xinjiang Uygur Autonomous Region(2024B01015).
文摘In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates the vertical growth process of strike-slip faults through field outcrop observations in the Keping area,interpretation of seismic data from the Fuman Oilfield,Tarim Basim,NW China,and structural physical simulation experiments.The results are obtained mainly in four aspects.First,field outcrops and ultra-deep seismic profiles indicate a three-layer structure within the strike-slip fault,consisting of fault core,fracture zone and primary rock.The fault core can be classified into three parts vertically:fracture-cavity unit,fault clay and breccia zone.The distribution of fracture-cavity units demonstrates a distinct pattern of vertical stratification,owing to the structural characteristics and growth process of the slip-strike fault.Second,the ultra-deep seismic profiles show multiple fracture-cavity units in the strike-slip fault zone.These units can be classified into four types:top fractured,middle connected,deep terminated,and intra-layer fractured.Third,structural physical simulation experiments and ultra-deep seismic data interpretation reveal that the strike-slip faults have evolved vertically in three stages:segmental rupture,vertical growth,and connection and extension.The particle image velocimetry detection demonstrates that the initial fracture of the fault zone occurred at the top or bottom and then evolved into cavities gradually along with the fault growth,accompanied by the emergence of new fractures in the middle part of the strata,which subsequently connected with the deep and shallow cavities to form a complete fault zone.Fourth,the ultra-deep carbonate strata primarily develop three types of fractured-cavity reservoirs:flower-shaped fracture,large and deep fault and staggered overlap.The first two types are larger in size with better reservoir conditions,suggesting a significant exploration potential.
基金funded by the Natural Science Foundation of China(Grants Nos.42272167,U24B6001,and 41772153)Science&Technology Project of Sinopec(Grant Nos.P23167 and P24173).
文摘Thiadiamondoids(TDs)have recently attracted increasing attention as molecular proxies for thermochemical sulfate reduction(TSR)reactions in reservoirs.However,their formation mechanisms,as well as the generation and evolution processes,remain poorly understood.In this study,simulation experiments with a duration of 160 h were conducted on the model compound 1,3-dimethyladamantane(1,3-DMA)using the CaSO_(4),MgSO_(4),and elemental S systems,with measurements at the 10th,20th,40th,80th and 160th hours during the simulation process being presented.The results indicate that at the end of simulation,the MgSO_(4) system exhibited the lowest residual amounts of 1,3-DMA,suggesting the highest degree of TSR.Four types of non-hydrocarbon compounds with adamantane structures were detected in the liquid products in the three experiment systems:adamantanones,adamantanols,adamantanethiols(ATs),and thiaadamantanes(TAs).Among these,adamantanones exhibited the highest concentrations in the three simulation systems.In addition,TAs were dominated by C_(3)-TAs in the CaSO_(4) and MgSO_(4) systems and by C_(2)-TAs in the elemental S system.The simulation experiments revealed a strong correlation between the concentrations of TAs and adamantanones,suggesting that adamantanones might be the intermediates for TAs.Combined with the synthesis mechanism of TAs from thiaadamamantane-4,8-dione,TDs might have two different genetic mechanisms:(a)low temperature cationic carbon ion rearrangement from diagenesis to early catagenesis stage,and(b)a free sulfur radical mechanism in high-temperature TSR process during middle-late catagenesis.TAs exhibited different generation and evolution processes across different experiment systems.Notably,the MgSO_(4) system revealed that TAs undergo generation,accumulation,and destruction process,corresponding to Easy%Ro values of 0.89%-0.98%,0.98%-1.21%,and>1.21%,respectively.Among these three simulation systems,dibenzothiophenes(DBTs)concentrations consistently trended upwards,indicating TAs have lower thermal stability than DBTs.
基金Supported by Scientific Research and Technology Development Project of PetroChina(KT2019-02-04,2021DJ1001).
文摘On the basis of analyzing the fluid phase behavior during the transformation from gas reservoir to gas storage,a mathematical model and an experimental simulation method are established to describe the oil-gas phase behavior during the whole injection-production process of gas storage.The underground gas storage in the Liaohe Shuang 6 gas reservoir with oil rim is taken as a typical example to verify the reliability and accuracy of the mathematical model and reveal characteristics and mechanisms of fluid phase behavior.In the gas injection stage of the gas storage,the phase behavior is characterized by mainly evaporation and extraction and secondarily dissolution and diffusion of gas in the cap to oil in the oil rim of the reservoir;the gas in gas cap increases in light component content,decreases in contents of intermediate and heavy components,and increases in density and viscosity.The oil of the ring decreases in content of heavy components,increases in contents of light and intermediate components,decreases in density and viscosity,and increases in volume factor and solution gas oil ratio.In the stable operation stage of periodic injection-production of gas storage,the phase behavior shows that the evaporation and extraction capacity of injection gas in the cap to oil rim is weakened step by step,the phase behavior gradually changes into dissolution and diffusion.The gas in gas cap decreases in content of intermediate components,increases in content of light components slowly,and becomes lighter;but changes hardly in density and viscosity.The oil in the oil rim increases in content of heavy components,decreases in content of intermediate components,rises in density and viscosity,and drops in volume factor and solution gas oil ratio.
基金supported by the National Natural Science Foundation of China(No.50974029)the Doctoral Program of the Ministry of Education(No.20070220001)Province Natural Science Foundation of Heilongjiang of China(No.E200816)
文摘The mechanism of fracture initiation is the basic issue for hydraulic fracture technology. Because of the huge differences in fracture initiation mechanisms for different reservoirs,some successful fracturing techniques applied to porosity reservoirs are ineffectual for fractured reservoirs.Laboratory tests using a process simulation device were performed to confirm the characteristics of fracture initiation and propagation in different reservoirs.The influences of crustal stress field,confining pressure,and natural fractures on the fracture initiation and propagation are discussed.Experimental results demonstrate that stress concentration around the hole would significantly increase the fracture pressure of the rock.At the same time,natural fractures in the borehole wall would eliminate the stress concentration,which leads to a decrease in the fracture initiation pressure.
基金Under the auspices of National Natural Science Foundation of China (No. 40901009)National Key Technologies Research and Development Program in the Eleventh Five-Year Plan of China (No. 2008BAD98B02, 2006BAC01A11)+1 种基金the Western Light Program of Talents Cultivating of Chinese Academy of Sciences (2008)the Foundation of Key Laboratory of Mountain Hazards and Surface Process, Chinese Academy of Sciences
文摘Soil cracking is an important process influencing water and solutes transport in the Yuanmou Dry-hot Valley region of Southwest China. Studying the morphological development of soil cracks helps to further reveal the close relationship between the soil cracking process and water movement in such semi-arid regions. Here we report regular changes on surface morphology of soil cracks with decreasing water in four different soils (Typ-Ustic Ferrisols,Ver-Ustic Ferrisols,Tru-Ustic Vertisols and Typ-Ustic Vertisols) through simulation experiments. Our results indicate the following: 1) Different soils ultimately have different development degrees of soil cracks,according to their various values of crack area density. Soil cracks in Typ-Ustic Ferrisols can only develop to the feeble degree,while those in the other three soils are capable of developing into the intensive degree,and even into the extremely intensive degree. 2) Soil crack complexity,as expressed by the value of the area-weighted mean of crack fractal dimension (AWMFRAC),is found to continuously decrease as a whole through the whole cracking process in all the studied soils. 3) Soil crack connectivity shows a uniform trend in the studied soils,that is to say,connectivity gradually increases with soil crack development.
基金the National Natural Science Foundation of China (40201009 and 90201007)Institute of Mountain Hazards and Environment, Chinese Academy of Sciences
文摘It＇s very important to simulate impact load of debris flow effectively and to investigate dynamic response of architectures under dynamic impact of debris flow, which are necessary to design disaster mitigation construction. Firstly, reinforced concrete domestic architectures in mountain areas of western China had been chosen as main architecture style. The bearing load style and the destructed shape of reinforced flamed construction impacted by discontinuous viscous debris flow were studied systematically. Secondly, Jiangjia Ravine debris flow valley in Yunnan Province, China had been chosen as research region. Utilizing based data from fieldwork and practical survey, the authors simulated and calculated theoretically impact force of discontinuous viscous debris flow. Thirdly, an impact data collecting system （IMHE IDCS） was designed and developed to fulfill designed simulation experiments. Finally, a series of impact test of researched structure models had been fulfilled. During experiment, the destructed shape and course of models were observed and the dynamic displacement data and main natural frequency data of models were collected and analyzed.
