Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study invest...Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study investigates their coupled effects using inclinedflume experiments and Discrete Element Method(DEM)simulations,covering three gravel sizes(2-5 mm,5-7 mm,7-10 mm)and four ice-content levels(0%,20%,40%,60%).Run-out distance,velocity,energy components,flow regime(Savage number),and segregation indexαwere quantified.Increasing ice content significantly enhances mobility,but with diminishing marginal effectiveness.From 0%to 40%ice content,run-out distance increases by 41%-86%,whereas the additional increase from 40%to 60%contributes only 12%-23%.Particle-size ratio strongly governs segregation intensity.Fine-gravel groups reach segregation indices ofα=0.92-0.98,indicating nearly complete upward migration of ice,whereas medium-gravel and coarse-gravel groups exhibit much weaker segregation,stabilizing atα=0.68-0.74 and 0.60-0.69.Savage number analyses reveal marked flow-regime transitions.At 0%ice content,Savage numbers reach 1.0-1.5,indicating a collisional regime.Increasing ice content suppresses collisionality,with Savage numbers decreasing to 0.03-0.07 at 60%ice content,consistent with dense-regime flow.DEM energy analyses confirm this regime shift:for finegravel mixtures,collision energy decreases by 14%,while sliding-friction energy increases by 33%as ice content increases from 0%to 60%,reflecting enhanced overburden effects imposed by upward-segregated ice layers.Medium and coarse mixtures exhibit weaker or opposite energy-shift patterns,demonstrating strong size dependence.Mechanistically,large particle-size contrasts promote strong segregation and form dense basal rock layers that increase basal friction and reduce mobility.When particle sizes are similar or ice content is high,segregation remains limited,allowing ice to mix into the basal layer,thereby reducing basal friction and enhancing mobility.This research quantitatively demonstrates how composition controls particle spatial distribution,flow regime,and energy dissipation,offering new mechanistic insights into the propagation and deposition behaviors of rock-ice avalanches and improving hazard assessment in vulnerable high-mountain regions.展开更多
Pathological scarring,manifested in the form of hypertrophic scars(HTS)and keloid scars(KS),represents a major clinical challenge due to its aesthetic and functional implications for patients.Understanding the molecul...Pathological scarring,manifested in the form of hypertrophic scars(HTS)and keloid scars(KS),represents a major clinical challenge due to its aesthetic and functional implications for patients.Understanding the molecular mechanisms involved in these types of scars and developing effective treatments requires the use of controlled ex-perimental models,especially animals,to overcome the limitations of clinical studies.The aim of this sistematic review is to critically analyze the animal models used in the last five years(2020-2025)for the study of pathological scars,highlighting their advantages,limitations and applicability in the development of new therapeutic strat-egies.Murine,rabbit and porcine models,as well as alternative models,offer varied perspectives on the formation and treatment of HTS and KS,with an emphasis on histological and molecular correlations with human pathology.By synthesizing recent data,the paper highlights the essential role of preclinical research in optimizing an-tifibrotic treatments and in advancing the translation of data into the clinical sphere.Overall,animal models remain essential for bridging mechanistic insights with clinical translation,supporting the development of more effective and personalized anti-scar therapies.展开更多
Recovered samples of Jilin H5 chondrite experimentally shocked to 12-133 GPa were studied to explore the behavior of opaque minerals under shock loading using SEM-EDS,Raman spectroscopy,and TIMA.The following results ...Recovered samples of Jilin H5 chondrite experimentally shocked to 12-133 GPa were studied to explore the behavior of opaque minerals under shock loading using SEM-EDS,Raman spectroscopy,and TIMA.The following results were obtained.Firstly,at pressures lower than 53GPa,the opaque minerals still keep the unmelted state,while at 78 GPa and higher,FeNi metal and troilite form eutectic intergrowths occurring as disorderly fine veinlets filling the shock-induced fractures in silicate minerals.Secondly,single kamacite grains still maintain their contour at 12 GPa,but a part of brittle troilite grains was fragmented and squeezed into the shock-induced fractures within kamacite grains.At53 and 133 GPa,many more troilite fragments are poured in the kamacite interior to form disordered hybrid aggregates or to form squiggly strips,respectively.Similar phenomena are observed within single troilite grains,but the mineral squeezed into troilite grains is kamacite.Thirdly,chromite is a hard and refractory oxide mineral.When the shock pressure rises step by step from 12 to 133 GPa,the shock effect of chromite is only fragmentation.Its grain size decreases from tens of um at 53 GPa to a few um at 133 GPa.And,fourthly,native copper exhibits distinct redistribution behavior at high temperature.In Jilin samples shock-loaded to 12 GPa,copper initially located at troilite-kamacite interfaces partially transferred into small troilite grains containing fine FeNi particles.At 53 and 133 GPa,native copper preferentially transferred into larger troilite grains containing more particles of eutectic FeNi metal.展开更多
To meet the need for cultivating application-oriented talents in local universities,this study introduced a project-based learning approach into the reform of bioinformatics experimental teaching.The course was struct...To meet the need for cultivating application-oriented talents in local universities,this study introduced a project-based learning approach into the reform of bioinformatics experimental teaching.The course was structured around a project titled"Influenza Virus Analysis",comprising four progressive modules:database utilization and information retrieval,sequence alignment and phylogenetic analysis,functional and structural prediction,and omics data analysis.These modules were integrated into a coherent research workflow that connected fragmented knowledge and technical skills.During implementation,flipped classroom and group collaboration methods were employed,alongside the establishment of a diversified assessment system emphasizing process evaluation.Teaching practice indicates that the reform effectively enhances students professional application skills,learning experience,and scientific literacy,facilitating a shift from"tool operation"to"problem-solving"capabilities.This study provides a reference model for the reform of bioinformatics experimental teaching in local universities.展开更多
Transitioning from outcrossing to self-fertilization is a widespread reproductive strategy in plants,especially in environments where pollination is limited.Despite its prevalence,this transition has rarely been exami...Transitioning from outcrossing to self-fertilization is a widespread reproductive strategy in plants,especially in environments where pollination is limited.Despite its prevalence,this transition has rarely been examined using transplant experiments,and previous studies have overlooked the contribution of the male parent in elucidating mating diversity.In this study,six transplanted populations were generated to investigate the relationship of the pollination environment with plant mating patterns and fecundity in Primula oreodoxa,a species that exhibits both distyly(predominantly outcrossing)and homostyly(predominantly selfing),based on data from 3582 individuals and 11 SSR markers.Homostylous plants had fruit and seed sets comparable to those of distylous plants at lower elevations but exhibited a clear reproductive advantage at higher elevations,particularly compared with the S morph.As elevation increased,the populational selfing rates increased,and the genetic diversity among the progeny was reduced.Furthermore,the visitation frequency of long-tongued pollinators was negatively and positively correlated with the selfing rate and number of mates,respectively,in the L and S morphs.In contrast,short-tongued pollinator visitation showed opposite correlations with the selfing rate and number of mates in homostylous morphs.In most populations,individuals functioned consistently as both female and male,and mating occurred randomly,suggesting a breakdown of the distyly polymorphism.Overall,our results provide experimental validation of the reproductive advantages of homostyly at high elevations by revealing that pollinator visitation shapes the selfing rate and mating diversity within populations,potentially driving the divergence of mating systems along environmental gradients.展开更多
To improve the accuracy of rockburst risk evaluation in mining and tunnelling engineering,the influence of intermediate principal stress σ_(2) deserves further consideration,which has been neglected in general predic...To improve the accuracy of rockburst risk evaluation in mining and tunnelling engineering,the influence of intermediate principal stress σ_(2) deserves further consideration,which has been neglected in general prediction frameworks.This study employs an integrated approach that combines true-triaxial unloading experiments with three-dimensional grain-based discrete element modeling(PFC3D-GBM)to examine the effects of σ_(2) on strain systematically burst and elucidate the underlying mechanisms.Through this dual experimental–numerical methodology,the strainburst characteristics under varying σ_(2) are analyzed in detail regarding mechanical responses,failure evolution and patterns,microscope fracture mechanisms,and energy partitioning.The results indicate that elevated σ_(2) can enhance the bearing capacity of rock,thereby necessitating a higher stress condition required for strainburst.However,it also enlarges the potential strainburst intensity,manifesting as deeper rockburst pits and more violent ejection of rock fragments.An increasing σ_(2) facilitates the microscope transgranular fractures,inhibits intergranular tensile fractures,and raises the kinetic energy conversion ratio slightly.It affects the intensity of strainburst through the following mechanisms,including the increase of energy storage limit,the intensification of Poisson effect for lateral expansion,and the enhancement of the transgranular fracturing mechanism.In practical engineering,the depth and range of support needs to be ensured under high σ_(2) conditions,and it is recommended to use prestressing techniques to control the development of significant slabbing.展开更多
4-Bromo-3-methylphenol(BMP)is an important chemical intermediate with wide applications in the fields of medicine and pesticides.The synthesis of BMP from m-cresol via bromination is easy to carry out on an industrial...4-Bromo-3-methylphenol(BMP)is an important chemical intermediate with wide applications in the fields of medicine and pesticides.The synthesis of BMP from m-cresol via bromination is easy to carry out on an industrial scale.However,due to the formation of regioisomeric impurities during bromination and the low melting point of BMP,the separation process is prone to the formation of oily substances,resulting in low yield and purity.In this work,a new cocrystallization engineering approach was proposed to separate and purify BMP.Through design of experiments,the cocrystallization process of BMP and triethylenediamine(DABCO)was optimized using a minimum-run resolution IV screening design combined with response surface methodology.In addition,the obtained 2BMP-DABCO powder was characterized by thermal analysis,powder X-ray diffraction,infrared spectroscopy,and scanning electron microscopy.Single crystals of 2BMP-DABCO were grown from acetone by slow evaporation,and detailed structural information was obtained through single-crystal X-ray diffraction.The self-assembly mechanism was further clarified by density functional theory calculations.This study provides a simple,robust,and scalable method for the production of BMP and offers a reference for the separation and purification of phenolic substances.展开更多
Experimental therapies targeting immune and stromal cells,such as mast cells,cancer-associated fibroblasts,dendritic cells,and tumor endothelial cells,in the treatment of gastrointestinal solid tumors pose new and com...Experimental therapies targeting immune and stromal cells,such as mast cells,cancer-associated fibroblasts,dendritic cells,and tumor endothelial cells,in the treatment of gastrointestinal solid tumors pose new and complex surgical and medico-legal challenges.These innovative treatments require that informed consent not be limited to simple acceptance of the medical procedure,but instead reflect a true relational and cognitive process grounded in understanding,free choice,and the ability to revoke consent at any time.In particular,it is essential that the patient understands the experimental nature of the therapy,its development stage,potential benefits and risks,as well as the implications for their health and personal dignity.In the case of stromal cell-based treatments,which may exert complex immunomodulatory effects or activate angiogenic pathways that are not yet fully understood,patients must be made fully aware that they are participating in a non-standardized therapy whose outcomes,whether beneficial or harmful,cannot yet be predicted with certainty.This requires particularly careful medical communication,using simple yet scientifically accurate explanations delivered in appropriate language,along with a final verification of the patient’s actual understanding.展开更多
The dynamic characteristics of the track system can directly affect its service performance and failure process.To explore the load characteristics and dynamic response of the track system under the dynamic loads from...The dynamic characteristics of the track system can directly affect its service performance and failure process.To explore the load characteristics and dynamic response of the track system under the dynamic loads from the rack vehicle in traction conditions,a systematic test of the track subsystem was carried out on a large-slope test line.In the test,the bending stress of the rack teeth,the wheel-rail forces,and the acceleration of crucial components in the track system were measured.Subsequently,a detailed analysis was conducted on the tested signals of the rack railway track system in the time domain and the time-frequency domains.The test results indicate that the traction force significantly affects the rack tooth bending stress and the wheel-rail forces.The vibrations of the track system under the traction conditions are mainly caused by the impacts generated from the gear-rack engagement,which are then transferred to the sleepers,the rails,and the ballast beds.Furthermore,both the maximum stress on the racks and the wheel-rail forces measured on the rails remain below their allowable values.This experimental study evaluates the load characteristics and reveals the vibration characteristics of the rack railway track system under the vehicle’s ultimate load,which is very important for the load-strengthening design of the key components such as racks and the vibration and noise reduction of the track system.展开更多
Time-delayed blasting is widely utilized in engineering to mitigate induced vibration hazards and enhance fragmentation.The underlying vibration reduction principle is the decrease of the charge weight per delay,while...Time-delayed blasting is widely utilized in engineering to mitigate induced vibration hazards and enhance fragmentation.The underlying vibration reduction principle is the decrease of the charge weight per delay,while the potential for further vibration reduction remains debated,largely due to unclear underlying mechanisms.In light of the popularization of electronic detonators and the representativeness of double-hole configurationsfor multiple blastholes,it is essential to investigate the vibration characteristics induced by time-delayed double blastholes.Therefore,a series of doubleborehole experimental blasts was conducted in an underground roadway to clarify the variation in vibration from single-hole to dual-hole conditions.Based on the experimental data and inherent limitations,an exact full-fieldtheoretical model was further employed to systematically analyze the effects of delay time,charge length,and borehole inclination angle on vibrations induced by various doublehole configurations.The experimental data and theoretical analysis reveal that the general scaled distance effectively predicts vibrations in delayed blasting but does not reflectvibration reduction.Increasing delay time causes fluctuatingPPVs,which stabilize slightly above single-hole PPVs as delay times exceed a certain value.The delayed blasting primarily reduces near-fieldfrequencies.Longer charge lengths in double boreholes increase PPV levels and attenuation rates within a certain length,and the vibration behavior of combined long and short charge lengths is governed by the long blasthole.Larger blasthole inclination angles enhance vibration amplitude and reduce PPV attenuation rates.Optimizing inclination angles is more critical than adjusting delay times,and parallel boreholes offer the best vibration control.展开更多
The recent upsurge in metro construction emphasizes the necessity of understanding the mechanical performance of metro shield tunnel subjected to the influence of ground fissures.In this study,a largescale experiment,...The recent upsurge in metro construction emphasizes the necessity of understanding the mechanical performance of metro shield tunnel subjected to the influence of ground fissures.In this study,a largescale experiment,in combination with numerical simulation,was conducted to investigate the influence of ground fissures on a metro shield tunnel.The results indicate that the lining contact pressure at the vault increases in the hanging wall while decreases in the footwall,resulting in a two-dimensional stress state of vertical shear and axial tension-compression,and simultaneous vertical dislocation and axial tilt for the segments around the ground fissure.In addition,the damage to curved bolts includes tensile yield,flexural yield,and shear twist,leading to obvious concrete lining damage,particularly at the vault,arch bottom,and hance,indicating that the joints in these positions are weak areas.The shield tunnel orthogonal to the ground fissure ultimately experiences shear failure,suggesting that the maximum actual dislocation of ground fissure that the structure can withstand is approximately 20 cm,and five segment rings in the hanging wall and six segment rings in the footwall also need to be reinforced.This study could provide a reference for metro design in ground fissure sites.展开更多
In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates t...In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates the vertical growth process of strike-slip faults through field outcrop observations in the Keping area,interpretation of seismic data from the Fuman Oilfield,Tarim Basim,NW China,and structural physical simulation experiments.The results are obtained mainly in four aspects.First,field outcrops and ultra-deep seismic profiles indicate a three-layer structure within the strike-slip fault,consisting of fault core,fracture zone and primary rock.The fault core can be classified into three parts vertically:fracture-cavity unit,fault clay and breccia zone.The distribution of fracture-cavity units demonstrates a distinct pattern of vertical stratification,owing to the structural characteristics and growth process of the slip-strike fault.Second,the ultra-deep seismic profiles show multiple fracture-cavity units in the strike-slip fault zone.These units can be classified into four types:top fractured,middle connected,deep terminated,and intra-layer fractured.Third,structural physical simulation experiments and ultra-deep seismic data interpretation reveal that the strike-slip faults have evolved vertically in three stages:segmental rupture,vertical growth,and connection and extension.The particle image velocimetry detection demonstrates that the initial fracture of the fault zone occurred at the top or bottom and then evolved into cavities gradually along with the fault growth,accompanied by the emergence of new fractures in the middle part of the strata,which subsequently connected with the deep and shallow cavities to form a complete fault zone.Fourth,the ultra-deep carbonate strata primarily develop three types of fractured-cavity reservoirs:flower-shaped fracture,large and deep fault and staggered overlap.The first two types are larger in size with better reservoir conditions,suggesting a significant exploration potential.展开更多
Cardiac injury initiates repair mechanisms and results in cardiac remodeling and fi-brosis,which appears to be a leading cause of cardiovascular diseases.Cardiac fi-brosis is characterized by the accumulation of extra...Cardiac injury initiates repair mechanisms and results in cardiac remodeling and fi-brosis,which appears to be a leading cause of cardiovascular diseases.Cardiac fi-brosis is characterized by the accumulation of extracellular matrix proteins,mainly collagen in the cardiac interstitium.Many experimental studies have demonstrated that fibrotic injury in the heart is reversible;therefore,it is vital to understand differ-ent molecular mechanisms that are involved in the initiation,progression,and resolu-tion of cardiac fibrosis to enable the development of antifibrotic agents.Of the many experimental models,one of the recent models that has gained renewed interest is isoproterenol(ISP)-induced cardiac fibrosis.ISP is a synthetic catecholamine,sympa-thomimetic,and nonselectiveβ-adrenergic receptor agonist.The overstimulated and sustained activation ofβ-adrenergic receptors has been reported to induce biochemi-cal and physiological alterations and ultimately result in cardiac remodeling.ISP has been used for decades to induce acute myocardial infarction.However,the use of low doses and chronic administration of ISP have been shown to induce cardiac fibrosis;this practice has increased in recent years.Intraperitoneal or subcutaneous ISP has been widely used in preclinical studies to induce cardiac remodeling manifested by fibrosis and hypertrophy.The induced oxidative stress with subsequent perturbations in cellular signaling cascades through triggering the release of free radicals is consid-ered the initiating mechanism of myocardial fibrosis.ISP is consistently used to induce fibrosis in laboratory animals and in cardiomyocytes isolated from animals.In recent years,numerous phytochemicals and synthetic molecules have been evaluated in ISP-induced cardiac fibrosis.The present review exclusively provides a comprehensive summary of the pathological biochemical,histological,and molecular mechanisms of ISP in inducing cardiac fibrosis and hypertrophy.It also summarizes the application of this experimental model in the therapeutic evaluation of natural as well as syn-thetic compounds to demonstrate their potential in mitigating myocardial fibrosis and hypertrophy.展开更多
OBJECTIVE:To explore the potential molecular mechanism of Qigu capsule(芪骨胶囊,QGC) in the treatment of sarcopenia through network pharmacology and to verify it experimentally.METHODS:The active compounds of QGC and ...OBJECTIVE:To explore the potential molecular mechanism of Qigu capsule(芪骨胶囊,QGC) in the treatment of sarcopenia through network pharmacology and to verify it experimentally.METHODS:The active compounds of QGC and common targets between QGC and sarcopenia were screened from databases.Then the herbs-compounds-targets network,and protein-protein interaction(PPI) network was constructed.Gene ontology(GO) and Kyoto Encyclopedia of Genes and Genomes(KEGG) pathway enrichment analysis were performed by R software.Next,we used a dexamethasone-induced sarcopenia mouse model to evaluate the anti-sarcopenic mechanism of QGC.RESULTS:A total of 57 common targets of QGC and sarcopenia were obtained.Based on the enrichment analysis of GO and KEGG,we took the phosphatidylinositol 3-kinase(PI3K)/protein kinase B(Akt) signaling pathway as a key target to explore the mechanism of QGC on sarcopenia.Animal experiments showed that QGC could increase muscle strength and inhibit muscle fiber atrophy.In the model group,the expression of muscle ring finger-1 and Atrogin-1 were increased,while myosin heavy chain was decreased,QGC treatment reversed these changes.Moreover,compared with the model group,the expressions of pPI3K,p-Akt,p-mammalian target of rapamycin and pForkhead box O3 in the QGC group were all upregulated.CONCLUSION:QGC exerts an anti-sarcopenic effect by activating PI3K/Akt signaling pathway to regulate skeletal muscle protein metabolism.展开更多
Ultrahigh-performance concrete(UHPC)is a groundbreaking kind of concrete that distinguishes itself from conventional concrete through its unique material properties.Understanding and managing the time-dependent charac...Ultrahigh-performance concrete(UHPC)is a groundbreaking kind of concrete that distinguishes itself from conventional concrete through its unique material properties.Understanding and managing the time-dependent characteristics of these materials is essential for their effective use in various construction applications.This study presents an experimental evaluation of the compressive and bending properties of the UHPC incorporating polypropylene,steel,and glass fibers.Based on ACI-211 guidelines,the UHPC mix was designed by using three types of aggregates:limestone,andesite,and quartzite,along with 5%fiber content(at varying percentages of 0,5%,10%,15%,and 20%)relative to the cementitious materials,and three different water-to-cement(w/c)ratios(0.24,0.3,and 0.4)were used.In this research,the compressive and flexural strength tests were conducted.The results show that increasing the values of the fibers significantly enhances the compressive strength of the studied samples.Furthermore,the utilization of fibers markedly improves the bending strength of the samples,demonstrating a strong correlation with the yield resistance of the material.Also,findings show that using steel fibers increases the compressive and bending strength of the tested samples more than polypropylene and glass fibers.For instance,in UHPC samples with 0.4 w/c,the average compressive strength values are 82.2 MPa,70.3 MPa,and 67.1 MPa for steel,polypropylene,and glass fibers,respectively.Also,in the flexural strength test,the modulus of rupture is obtained as an average of 6.24 MPa,5.24 MPa and 4.83 MPa for UHPC samples with steel,polypropylene and glass fibers,respectively.展开更多
To address the challenges in studying the pore formation and evolution processes,and unclear preservation mechanisms of deep to ultra-deep carbonate rocks,a high-temperature and high-pressure visualization simulation ...To address the challenges in studying the pore formation and evolution processes,and unclear preservation mechanisms of deep to ultra-deep carbonate rocks,a high-temperature and high-pressure visualization simulation experimental device was developed for ultra-deep carbonate reservoirs.Carbonate rock samples from the Sichuan Basin and Tarim Basin were used to simulate the dissolution-precipitation process of deep to ultra-deep carbonate reservoirs in an analogous geological setting.This unit comprises four core modules:an ultra-high temperature,high pressure triaxial stress core holder module(temperature higher than 300°C,pressure higher than 150 MPa),a multi-stage continuous flow module with temperature-pressure regulation,an ultra-high temperature-pressure sapphire window cell and an in-situ high-temperature-pressure fluid property measurement module and real-time ultra-high temperature-pressure permeability detection module.The new experimental device was used for simulation experiment,the geological insights were obtained in three aspects.First,the pore-throat structure of carbonate is controlled by lithology and initial pore-throat structure,and fluid type,concentration and dissolution duration determine the degree of dissolution.The dissolution process exhibits two evolution patterns.The dissolution scale is positively correlated to the temperature and pressure,and the pore-forming peak period aligns well with the hydrocarbon generation peak period.Second,the dissolution potential of dolomite in an open flow system is greater than that of limestone,and secondary dissolved pores formed continuously are controlled by the type and concentration of acidic fluids and the initial physical properties.These pores predominantly distribute along pre-existing pore/fracture zones.Third,in a nearly closed diagenetic system,after the chemical reaction between acidic fluids and carbonate rock reaches saturation and dynamic equilibrium,the pore structure no longer changes,keeping pre-existing pores well-preserved.These findings have important guiding significance for the evaluation of pore-throat structure and development potential of deep to ultra-deep carbonate reservoirs,and the prediction of main controlling factors and distribution of high-quality carbonate reservoirs.展开更多
In the scenario of a steam generator tube rupture accident in a lead-cooled fast reactor,secondary circuit subcooled water under high pressure is injected into an ordinary-pressure primary vessel,where a molten lead-b...In the scenario of a steam generator tube rupture accident in a lead-cooled fast reactor,secondary circuit subcooled water under high pressure is injected into an ordinary-pressure primary vessel,where a molten lead-based alloy(typically pure lead or lead-bismuth eutectic(LBE))is used as the coolant.To clarify the pressure build-up characteristics under water-jet injection,this study conducted several experiments by injecting pressurized water into a molten LBE pool at Sun Yat-sen University.To obtain a further understanding,several new experimental parameters were adopted,including the melt temperature,water subcooling,injection pressure,injection duration,and nozzle diameter.Through detailed analyses,it was found that the pressure and temperature during the water-melt interaction exhibited a consistent variation trend with our previous water-droplet injection mode LBE experiment.Similarly,the existence of a steam explosion was confirmed,which typically results in a much stronger pressure build-up.For the non-explosion cases,increasing the injection pressure,melt-pool temperature,nozzle diameter,and water subcooling promoted pressure build-up in the melt pool.However,a limited enhancement effect was observed when increasing the injection duration,which may be owing to the continually rising pressure in the interaction vessel or the isolation effect of the generated steam cavity.Regardless of whether a steam explosion occurred,the calculated mechanical and kinetic energy conversion efficiencies of the melt were relatively small(not exceeding 4.1%and 0.7%,respectively).Moreover,the range of the conversion efficiency was similar to that of previous water-droplet experiments,although the upper limit of the jet mode was slightly lower.展开更多
Neuromyelitis optica spectrum disorders are neuroinflammatory demyelinating disorders that lead to permanent visual loss and motor dysfunction.To date,no effective treatment exists as the exact causative mechanism rem...Neuromyelitis optica spectrum disorders are neuroinflammatory demyelinating disorders that lead to permanent visual loss and motor dysfunction.To date,no effective treatment exists as the exact causative mechanism remains unknown.Therefore,experimental models of neuromyelitis optica spectrum disorders are essential for exploring its pathogenesis and in screening for therapeutic targets.Since most patients with neuromyelitis optica spectrum disorders are seropositive for IgG autoantibodies against aquaporin-4,which is highly expressed on the membrane of astrocyte endfeet,most current experimental models are based on aquaporin-4-IgG that initially targets astrocytes.These experimental models have successfully simulated many pathological features of neuromyelitis optica spectrum disorders,such as aquaporin-4 loss,astrocytopathy,granulocyte and macrophage infiltration,complement activation,demyelination,and neuronal loss;however,they do not fully capture the pathological process of human neuromyelitis optica spectrum disorders.In this review,we summarize the currently known pathogenic mechanisms and the development of associated experimental models in vitro,ex vivo,and in vivo for neuromyelitis optica spectrum disorders,suggest potential pathogenic mechanisms for further investigation,and provide guidance on experimental model choices.In addition,this review summarizes the latest information on pathologies and therapies for neuromyelitis optica spectrum disorders based on experimental models of aquaporin-4-IgG-seropositive neuromyelitis optica spectrum disorders,offering further therapeutic targets and a theoretical basis for clinical trials.展开更多
Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and th...Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and their acoustic properties were characterized to match the design path.The parallelism of the Al-Cu GM was confirmed using a three-dimensional surface profilometry machine.A one-stage light-gas gun was used to launch the Al-Cu GM,impacting an Al-LiF target at a velocity of 400 m/s.The results of the experimental strain rate demonstrate that the Al-Cu GMs can realize the precise control of the strain rate within the range of 10^(4)‒10^(5)/s in the high-speed impact experiments.展开更多
This study aimed to investigate the moment redistribution in continuous glass fiber reinforced polymer(GFRP)-concrete composite slabs caused by concrete cracking and steel bar yielding in the negative bending moment z...This study aimed to investigate the moment redistribution in continuous glass fiber reinforced polymer(GFRP)-concrete composite slabs caused by concrete cracking and steel bar yielding in the negative bending moment zone.An experimental bending moment redistribution test was conducted on continuous GFRP-concrete composite slabs,and a calculation method based on the conjugate beam method was proposed.The composite slabs were formed by combining GFRP profiles with a concrete layer and supported on steel beams to create two-span continuous composite slab specimens.Two methods,epoxy resin bonding,and stud connection,were used to connect the composite slabs with the steel beams.The experimental findings showed that the specimen connected with epoxy resin exhibited two moments redistribution phenomena during the loading process:concrete cracking and steel bar yielding at the internal support.In contrast,the composite slab connected with steel beams by studs exhibited only one-moment redistribution phenomenon throughout the loading process.As the concrete at the internal support cracked,the bending moment decreased in the internal support section and increased in the midspan section.When the steel bars yielded,the bending moment further decreased in the internal support section and increased in the mid-span section.Since GFRP profiles do not experience cracking,there was no significant decrease in the bending moment of the mid-span section.All test specimens experienced compressive failure of concrete at the mid-span section.Calculation results showed good agreement between the calculated and experimental values of bending moments in the mid-span section and internal support section.The proposed model can effectively predict the moment redistribution behavior of continuous GFRP-concrete composite slabs.展开更多
基金funded by the Natural Science Foundation of China(Grants No 42277127)。
文摘Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study investigates their coupled effects using inclinedflume experiments and Discrete Element Method(DEM)simulations,covering three gravel sizes(2-5 mm,5-7 mm,7-10 mm)and four ice-content levels(0%,20%,40%,60%).Run-out distance,velocity,energy components,flow regime(Savage number),and segregation indexαwere quantified.Increasing ice content significantly enhances mobility,but with diminishing marginal effectiveness.From 0%to 40%ice content,run-out distance increases by 41%-86%,whereas the additional increase from 40%to 60%contributes only 12%-23%.Particle-size ratio strongly governs segregation intensity.Fine-gravel groups reach segregation indices ofα=0.92-0.98,indicating nearly complete upward migration of ice,whereas medium-gravel and coarse-gravel groups exhibit much weaker segregation,stabilizing atα=0.68-0.74 and 0.60-0.69.Savage number analyses reveal marked flow-regime transitions.At 0%ice content,Savage numbers reach 1.0-1.5,indicating a collisional regime.Increasing ice content suppresses collisionality,with Savage numbers decreasing to 0.03-0.07 at 60%ice content,consistent with dense-regime flow.DEM energy analyses confirm this regime shift:for finegravel mixtures,collision energy decreases by 14%,while sliding-friction energy increases by 33%as ice content increases from 0%to 60%,reflecting enhanced overburden effects imposed by upward-segregated ice layers.Medium and coarse mixtures exhibit weaker or opposite energy-shift patterns,demonstrating strong size dependence.Mechanistically,large particle-size contrasts promote strong segregation and form dense basal rock layers that increase basal friction and reduce mobility.When particle sizes are similar or ice content is high,segregation remains limited,allowing ice to mix into the basal layer,thereby reducing basal friction and enhancing mobility.This research quantitatively demonstrates how composition controls particle spatial distribution,flow regime,and energy dissipation,offering new mechanistic insights into the propagation and deposition behaviors of rock-ice avalanches and improving hazard assessment in vulnerable high-mountain regions.
基金Ministry of Research,Innovation and Digitization,CCCDI-UEFISCDI,Grant/Award Number:PN-IV-P7-7.1-PED-2024-1578,within PNCDI Ⅳ.
文摘Pathological scarring,manifested in the form of hypertrophic scars(HTS)and keloid scars(KS),represents a major clinical challenge due to its aesthetic and functional implications for patients.Understanding the molecular mechanisms involved in these types of scars and developing effective treatments requires the use of controlled ex-perimental models,especially animals,to overcome the limitations of clinical studies.The aim of this sistematic review is to critically analyze the animal models used in the last five years(2020-2025)for the study of pathological scars,highlighting their advantages,limitations and applicability in the development of new therapeutic strat-egies.Murine,rabbit and porcine models,as well as alternative models,offer varied perspectives on the formation and treatment of HTS and KS,with an emphasis on histological and molecular correlations with human pathology.By synthesizing recent data,the paper highlights the essential role of preclinical research in optimizing an-tifibrotic treatments and in advancing the translation of data into the clinical sphere.Overall,animal models remain essential for bridging mechanistic insights with clinical translation,supporting the development of more effective and personalized anti-scar therapies.
基金Science and Technology Planning Project of Guangdong Province,2023B1212060048,Xiande Xie。
文摘Recovered samples of Jilin H5 chondrite experimentally shocked to 12-133 GPa were studied to explore the behavior of opaque minerals under shock loading using SEM-EDS,Raman spectroscopy,and TIMA.The following results were obtained.Firstly,at pressures lower than 53GPa,the opaque minerals still keep the unmelted state,while at 78 GPa and higher,FeNi metal and troilite form eutectic intergrowths occurring as disorderly fine veinlets filling the shock-induced fractures in silicate minerals.Secondly,single kamacite grains still maintain their contour at 12 GPa,but a part of brittle troilite grains was fragmented and squeezed into the shock-induced fractures within kamacite grains.At53 and 133 GPa,many more troilite fragments are poured in the kamacite interior to form disordered hybrid aggregates or to form squiggly strips,respectively.Similar phenomena are observed within single troilite grains,but the mineral squeezed into troilite grains is kamacite.Thirdly,chromite is a hard and refractory oxide mineral.When the shock pressure rises step by step from 12 to 133 GPa,the shock effect of chromite is only fragmentation.Its grain size decreases from tens of um at 53 GPa to a few um at 133 GPa.And,fourthly,native copper exhibits distinct redistribution behavior at high temperature.In Jilin samples shock-loaded to 12 GPa,copper initially located at troilite-kamacite interfaces partially transferred into small troilite grains containing fine FeNi particles.At 53 and 133 GPa,native copper preferentially transferred into larger troilite grains containing more particles of eutectic FeNi metal.
基金Supported by Undergraduate Higher Education Teaching Quality and Reform Projects of Guangdong Province(Yuejiao Gao Han[2024]No.9,Yuejiao Gao Han[2024]No.30)Guangdong Basic and Applied Basic Research Foundation(2023A1515110973)+1 种基金Guangdong Provincial Young Innovative Talents Project of General Colleges and Universities(2023KQNCX089)Quality Engineering and Teaching Reform Projects of Zhaoqing University(zlgc202239,zlgc202207,zlgc2024005,zlgc2024038).
文摘To meet the need for cultivating application-oriented talents in local universities,this study introduced a project-based learning approach into the reform of bioinformatics experimental teaching.The course was structured around a project titled"Influenza Virus Analysis",comprising four progressive modules:database utilization and information retrieval,sequence alignment and phylogenetic analysis,functional and structural prediction,and omics data analysis.These modules were integrated into a coherent research workflow that connected fragmented knowledge and technical skills.During implementation,flipped classroom and group collaboration methods were employed,alongside the establishment of a diversified assessment system emphasizing process evaluation.Teaching practice indicates that the reform effectively enhances students professional application skills,learning experience,and scientific literacy,facilitating a shift from"tool operation"to"problem-solving"capabilities.This study provides a reference model for the reform of bioinformatics experimental teaching in local universities.
基金funded by grants from the National Natural Science Foundation of China(31800314,32370239,U160323)the foundation of South China Botanical Garden,Chinese Academy of Sciences(QNXM-06)to SY and the Doctoral Research Foundation of China West Normal University(412994).
文摘Transitioning from outcrossing to self-fertilization is a widespread reproductive strategy in plants,especially in environments where pollination is limited.Despite its prevalence,this transition has rarely been examined using transplant experiments,and previous studies have overlooked the contribution of the male parent in elucidating mating diversity.In this study,six transplanted populations were generated to investigate the relationship of the pollination environment with plant mating patterns and fecundity in Primula oreodoxa,a species that exhibits both distyly(predominantly outcrossing)and homostyly(predominantly selfing),based on data from 3582 individuals and 11 SSR markers.Homostylous plants had fruit and seed sets comparable to those of distylous plants at lower elevations but exhibited a clear reproductive advantage at higher elevations,particularly compared with the S morph.As elevation increased,the populational selfing rates increased,and the genetic diversity among the progeny was reduced.Furthermore,the visitation frequency of long-tongued pollinators was negatively and positively correlated with the selfing rate and number of mates,respectively,in the L and S morphs.In contrast,short-tongued pollinator visitation showed opposite correlations with the selfing rate and number of mates in homostylous morphs.In most populations,individuals functioned consistently as both female and male,and mating occurred randomly,suggesting a breakdown of the distyly polymorphism.Overall,our results provide experimental validation of the reproductive advantages of homostyly at high elevations by revealing that pollinator visitation shapes the selfing rate and mating diversity within populations,potentially driving the divergence of mating systems along environmental gradients.
基金supported by the National Natural Science Foundation of China(No.42507210)the Fundamental Research Funds for the Central Universities(No.2025XJSB01)+1 种基金the State Key Laboratory for Tunnel Engineering(No.SKLTEK202421)the Foundation of Key Laboratory of Deep Coal Resource Mining(China University of Mining and Technology),Ministry of Education(No.KLDCRMMOE24KF11).
文摘To improve the accuracy of rockburst risk evaluation in mining and tunnelling engineering,the influence of intermediate principal stress σ_(2) deserves further consideration,which has been neglected in general prediction frameworks.This study employs an integrated approach that combines true-triaxial unloading experiments with three-dimensional grain-based discrete element modeling(PFC3D-GBM)to examine the effects of σ_(2) on strain systematically burst and elucidate the underlying mechanisms.Through this dual experimental–numerical methodology,the strainburst characteristics under varying σ_(2) are analyzed in detail regarding mechanical responses,failure evolution and patterns,microscope fracture mechanisms,and energy partitioning.The results indicate that elevated σ_(2) can enhance the bearing capacity of rock,thereby necessitating a higher stress condition required for strainburst.However,it also enlarges the potential strainburst intensity,manifesting as deeper rockburst pits and more violent ejection of rock fragments.An increasing σ_(2) facilitates the microscope transgranular fractures,inhibits intergranular tensile fractures,and raises the kinetic energy conversion ratio slightly.It affects the intensity of strainburst through the following mechanisms,including the increase of energy storage limit,the intensification of Poisson effect for lateral expansion,and the enhancement of the transgranular fracturing mechanism.In practical engineering,the depth and range of support needs to be ensured under high σ_(2) conditions,and it is recommended to use prestressing techniques to control the development of significant slabbing.
基金supported by the National Natural Science Foundation of China(22177011(R.Z.Qiao),21977012(R.Z.Qiao),and 21572018(C.Li))the National High-Level Hospital Clinical Research Funding(2023-NHLHCRF-YXHZ-ZRMS-02)the Joint Project of BRCBC(Biomedical Translational Engineering Research Center of BUCT-CJFH)(XK2020-06).
文摘4-Bromo-3-methylphenol(BMP)is an important chemical intermediate with wide applications in the fields of medicine and pesticides.The synthesis of BMP from m-cresol via bromination is easy to carry out on an industrial scale.However,due to the formation of regioisomeric impurities during bromination and the low melting point of BMP,the separation process is prone to the formation of oily substances,resulting in low yield and purity.In this work,a new cocrystallization engineering approach was proposed to separate and purify BMP.Through design of experiments,the cocrystallization process of BMP and triethylenediamine(DABCO)was optimized using a minimum-run resolution IV screening design combined with response surface methodology.In addition,the obtained 2BMP-DABCO powder was characterized by thermal analysis,powder X-ray diffraction,infrared spectroscopy,and scanning electron microscopy.Single crystals of 2BMP-DABCO were grown from acetone by slow evaporation,and detailed structural information was obtained through single-crystal X-ray diffraction.The self-assembly mechanism was further clarified by density functional theory calculations.This study provides a simple,robust,and scalable method for the production of BMP and offers a reference for the separation and purification of phenolic substances.
文摘Experimental therapies targeting immune and stromal cells,such as mast cells,cancer-associated fibroblasts,dendritic cells,and tumor endothelial cells,in the treatment of gastrointestinal solid tumors pose new and complex surgical and medico-legal challenges.These innovative treatments require that informed consent not be limited to simple acceptance of the medical procedure,but instead reflect a true relational and cognitive process grounded in understanding,free choice,and the ability to revoke consent at any time.In particular,it is essential that the patient understands the experimental nature of the therapy,its development stage,potential benefits and risks,as well as the implications for their health and personal dignity.In the case of stromal cell-based treatments,which may exert complex immunomodulatory effects or activate angiogenic pathways that are not yet fully understood,patients must be made fully aware that they are participating in a non-standardized therapy whose outcomes,whether beneficial or harmful,cannot yet be predicted with certainty.This requires particularly careful medical communication,using simple yet scientifically accurate explanations delivered in appropriate language,along with a final verification of the patient’s actual understanding.
基金supported by the National Natural Science Foundation of China(No.52388102)the Sichuan Science and Technology Program(No.2024NSFTD0011)the Fundamental Research Funds for the State Key Laboratory of Rail Transit Vehicle System of Southwest Jiaotong University(No.2023TPL-T11).
文摘The dynamic characteristics of the track system can directly affect its service performance and failure process.To explore the load characteristics and dynamic response of the track system under the dynamic loads from the rack vehicle in traction conditions,a systematic test of the track subsystem was carried out on a large-slope test line.In the test,the bending stress of the rack teeth,the wheel-rail forces,and the acceleration of crucial components in the track system were measured.Subsequently,a detailed analysis was conducted on the tested signals of the rack railway track system in the time domain and the time-frequency domains.The test results indicate that the traction force significantly affects the rack tooth bending stress and the wheel-rail forces.The vibrations of the track system under the traction conditions are mainly caused by the impacts generated from the gear-rack engagement,which are then transferred to the sleepers,the rails,and the ballast beds.Furthermore,both the maximum stress on the racks and the wheel-rail forces measured on the rails remain below their allowable values.This experimental study evaluates the load characteristics and reveals the vibration characteristics of the rack railway track system under the vehicle’s ultimate load,which is very important for the load-strengthening design of the key components such as racks and the vibration and noise reduction of the track system.
基金supported by the National Natural Science Foundation of China(Grant Nos.42407267 and 52374152)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20220975).
文摘Time-delayed blasting is widely utilized in engineering to mitigate induced vibration hazards and enhance fragmentation.The underlying vibration reduction principle is the decrease of the charge weight per delay,while the potential for further vibration reduction remains debated,largely due to unclear underlying mechanisms.In light of the popularization of electronic detonators and the representativeness of double-hole configurationsfor multiple blastholes,it is essential to investigate the vibration characteristics induced by time-delayed double blastholes.Therefore,a series of doubleborehole experimental blasts was conducted in an underground roadway to clarify the variation in vibration from single-hole to dual-hole conditions.Based on the experimental data and inherent limitations,an exact full-fieldtheoretical model was further employed to systematically analyze the effects of delay time,charge length,and borehole inclination angle on vibrations induced by various doublehole configurations.The experimental data and theoretical analysis reveal that the general scaled distance effectively predicts vibrations in delayed blasting but does not reflectvibration reduction.Increasing delay time causes fluctuatingPPVs,which stabilize slightly above single-hole PPVs as delay times exceed a certain value.The delayed blasting primarily reduces near-fieldfrequencies.Longer charge lengths in double boreholes increase PPV levels and attenuation rates within a certain length,and the vibration behavior of combined long and short charge lengths is governed by the long blasthole.Larger blasthole inclination angles enhance vibration amplitude and reduce PPV attenuation rates.Optimizing inclination angles is more critical than adjusting delay times,and parallel boreholes offer the best vibration control.
基金supported by the National Key Research&Development Program of China(Grant No.2023YFC3008404)the Key Laboratory of Earth Fissures Geological Disaster,Ministry of Natural Resources,China(Grant Nos.EFGD20240609 and EFGD20240610).
文摘The recent upsurge in metro construction emphasizes the necessity of understanding the mechanical performance of metro shield tunnel subjected to the influence of ground fissures.In this study,a largescale experiment,in combination with numerical simulation,was conducted to investigate the influence of ground fissures on a metro shield tunnel.The results indicate that the lining contact pressure at the vault increases in the hanging wall while decreases in the footwall,resulting in a two-dimensional stress state of vertical shear and axial tension-compression,and simultaneous vertical dislocation and axial tilt for the segments around the ground fissure.In addition,the damage to curved bolts includes tensile yield,flexural yield,and shear twist,leading to obvious concrete lining damage,particularly at the vault,arch bottom,and hance,indicating that the joints in these positions are weak areas.The shield tunnel orthogonal to the ground fissure ultimately experiences shear failure,suggesting that the maximum actual dislocation of ground fissure that the structure can withstand is approximately 20 cm,and five segment rings in the hanging wall and six segment rings in the footwall also need to be reinforced.This study could provide a reference for metro design in ground fissure sites.
基金Supported by the National Natural Science Foundation of China(42362026)Key R&D Project of Xinjiang Uygur Autonomous Region(2024B01015).
文摘In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates the vertical growth process of strike-slip faults through field outcrop observations in the Keping area,interpretation of seismic data from the Fuman Oilfield,Tarim Basim,NW China,and structural physical simulation experiments.The results are obtained mainly in four aspects.First,field outcrops and ultra-deep seismic profiles indicate a three-layer structure within the strike-slip fault,consisting of fault core,fracture zone and primary rock.The fault core can be classified into three parts vertically:fracture-cavity unit,fault clay and breccia zone.The distribution of fracture-cavity units demonstrates a distinct pattern of vertical stratification,owing to the structural characteristics and growth process of the slip-strike fault.Second,the ultra-deep seismic profiles show multiple fracture-cavity units in the strike-slip fault zone.These units can be classified into four types:top fractured,middle connected,deep terminated,and intra-layer fractured.Third,structural physical simulation experiments and ultra-deep seismic data interpretation reveal that the strike-slip faults have evolved vertically in three stages:segmental rupture,vertical growth,and connection and extension.The particle image velocimetry detection demonstrates that the initial fracture of the fault zone occurred at the top or bottom and then evolved into cavities gradually along with the fault growth,accompanied by the emergence of new fractures in the middle part of the strata,which subsequently connected with the deep and shallow cavities to form a complete fault zone.Fourth,the ultra-deep carbonate strata primarily develop three types of fractured-cavity reservoirs:flower-shaped fracture,large and deep fault and staggered overlap.The first two types are larger in size with better reservoir conditions,suggesting a significant exploration potential.
基金United Arab Emirates University,Grant/Award Number:12R104 and 12R121。
文摘Cardiac injury initiates repair mechanisms and results in cardiac remodeling and fi-brosis,which appears to be a leading cause of cardiovascular diseases.Cardiac fi-brosis is characterized by the accumulation of extracellular matrix proteins,mainly collagen in the cardiac interstitium.Many experimental studies have demonstrated that fibrotic injury in the heart is reversible;therefore,it is vital to understand differ-ent molecular mechanisms that are involved in the initiation,progression,and resolu-tion of cardiac fibrosis to enable the development of antifibrotic agents.Of the many experimental models,one of the recent models that has gained renewed interest is isoproterenol(ISP)-induced cardiac fibrosis.ISP is a synthetic catecholamine,sympa-thomimetic,and nonselectiveβ-adrenergic receptor agonist.The overstimulated and sustained activation ofβ-adrenergic receptors has been reported to induce biochemi-cal and physiological alterations and ultimately result in cardiac remodeling.ISP has been used for decades to induce acute myocardial infarction.However,the use of low doses and chronic administration of ISP have been shown to induce cardiac fibrosis;this practice has increased in recent years.Intraperitoneal or subcutaneous ISP has been widely used in preclinical studies to induce cardiac remodeling manifested by fibrosis and hypertrophy.The induced oxidative stress with subsequent perturbations in cellular signaling cascades through triggering the release of free radicals is consid-ered the initiating mechanism of myocardial fibrosis.ISP is consistently used to induce fibrosis in laboratory animals and in cardiomyocytes isolated from animals.In recent years,numerous phytochemicals and synthetic molecules have been evaluated in ISP-induced cardiac fibrosis.The present review exclusively provides a comprehensive summary of the pathological biochemical,histological,and molecular mechanisms of ISP in inducing cardiac fibrosis and hypertrophy.It also summarizes the application of this experimental model in the therapeutic evaluation of natural as well as syn-thetic compounds to demonstrate their potential in mitigating myocardial fibrosis and hypertrophy.
基金Shanghai Clinical Research Center for Chronic Musculoskeletal Diseases (20MC1920600)Shanghai Key Clinical Specialty "Traditional Chinese Medicine Orthopaedic Traumatology"(shslczdzk03901)+3 种基金The Second Round of Construction Project of National TCM Academic School Inheritance Studio "Shi's Trauma Department"[Letter of the People's Education of Traditional Chinese Medicine (2019) No.62]Shanghai High-level Local Universities "Chronic Muscle and Bone Damage Research and Transformation" Innovation Team [No.3 of Shanghai Education Commission (2022)]Program for Shanghai High-Level Local University Innovation Team (SZY20220315)Shanghai Shenkang Hospital Development Center Clinical Three-year Action Plan (SHDC2020CR3090B)。
文摘OBJECTIVE:To explore the potential molecular mechanism of Qigu capsule(芪骨胶囊,QGC) in the treatment of sarcopenia through network pharmacology and to verify it experimentally.METHODS:The active compounds of QGC and common targets between QGC and sarcopenia were screened from databases.Then the herbs-compounds-targets network,and protein-protein interaction(PPI) network was constructed.Gene ontology(GO) and Kyoto Encyclopedia of Genes and Genomes(KEGG) pathway enrichment analysis were performed by R software.Next,we used a dexamethasone-induced sarcopenia mouse model to evaluate the anti-sarcopenic mechanism of QGC.RESULTS:A total of 57 common targets of QGC and sarcopenia were obtained.Based on the enrichment analysis of GO and KEGG,we took the phosphatidylinositol 3-kinase(PI3K)/protein kinase B(Akt) signaling pathway as a key target to explore the mechanism of QGC on sarcopenia.Animal experiments showed that QGC could increase muscle strength and inhibit muscle fiber atrophy.In the model group,the expression of muscle ring finger-1 and Atrogin-1 were increased,while myosin heavy chain was decreased,QGC treatment reversed these changes.Moreover,compared with the model group,the expressions of pPI3K,p-Akt,p-mammalian target of rapamycin and pForkhead box O3 in the QGC group were all upregulated.CONCLUSION:QGC exerts an anti-sarcopenic effect by activating PI3K/Akt signaling pathway to regulate skeletal muscle protein metabolism.
文摘Ultrahigh-performance concrete(UHPC)is a groundbreaking kind of concrete that distinguishes itself from conventional concrete through its unique material properties.Understanding and managing the time-dependent characteristics of these materials is essential for their effective use in various construction applications.This study presents an experimental evaluation of the compressive and bending properties of the UHPC incorporating polypropylene,steel,and glass fibers.Based on ACI-211 guidelines,the UHPC mix was designed by using three types of aggregates:limestone,andesite,and quartzite,along with 5%fiber content(at varying percentages of 0,5%,10%,15%,and 20%)relative to the cementitious materials,and three different water-to-cement(w/c)ratios(0.24,0.3,and 0.4)were used.In this research,the compressive and flexural strength tests were conducted.The results show that increasing the values of the fibers significantly enhances the compressive strength of the studied samples.Furthermore,the utilization of fibers markedly improves the bending strength of the samples,demonstrating a strong correlation with the yield resistance of the material.Also,findings show that using steel fibers increases the compressive and bending strength of the tested samples more than polypropylene and glass fibers.For instance,in UHPC samples with 0.4 w/c,the average compressive strength values are 82.2 MPa,70.3 MPa,and 67.1 MPa for steel,polypropylene,and glass fibers,respectively.Also,in the flexural strength test,the modulus of rupture is obtained as an average of 6.24 MPa,5.24 MPa and 4.83 MPa for UHPC samples with steel,polypropylene and glass fibers,respectively.
基金Supported by the Joint Fund for Enterprise Innovation and Development of the National Natural Science Foundation of China(U23B20154)General Program of the National Natural Science Foundation of China(42372169)。
文摘To address the challenges in studying the pore formation and evolution processes,and unclear preservation mechanisms of deep to ultra-deep carbonate rocks,a high-temperature and high-pressure visualization simulation experimental device was developed for ultra-deep carbonate reservoirs.Carbonate rock samples from the Sichuan Basin and Tarim Basin were used to simulate the dissolution-precipitation process of deep to ultra-deep carbonate reservoirs in an analogous geological setting.This unit comprises four core modules:an ultra-high temperature,high pressure triaxial stress core holder module(temperature higher than 300°C,pressure higher than 150 MPa),a multi-stage continuous flow module with temperature-pressure regulation,an ultra-high temperature-pressure sapphire window cell and an in-situ high-temperature-pressure fluid property measurement module and real-time ultra-high temperature-pressure permeability detection module.The new experimental device was used for simulation experiment,the geological insights were obtained in three aspects.First,the pore-throat structure of carbonate is controlled by lithology and initial pore-throat structure,and fluid type,concentration and dissolution duration determine the degree of dissolution.The dissolution process exhibits two evolution patterns.The dissolution scale is positively correlated to the temperature and pressure,and the pore-forming peak period aligns well with the hydrocarbon generation peak period.Second,the dissolution potential of dolomite in an open flow system is greater than that of limestone,and secondary dissolved pores formed continuously are controlled by the type and concentration of acidic fluids and the initial physical properties.These pores predominantly distribute along pre-existing pore/fracture zones.Third,in a nearly closed diagenetic system,after the chemical reaction between acidic fluids and carbonate rock reaches saturation and dynamic equilibrium,the pore structure no longer changes,keeping pre-existing pores well-preserved.These findings have important guiding significance for the evaluation of pore-throat structure and development potential of deep to ultra-deep carbonate reservoirs,and the prediction of main controlling factors and distribution of high-quality carbonate reservoirs.
基金supported by Basic and Applied Basic research foundation of Guangdong province(Nos.2021A1515010343 and 2022A1515011582)the Science and Technology Program of Guangdong Province(Nos.2021A0505030026 and 2022A0505050029).
文摘In the scenario of a steam generator tube rupture accident in a lead-cooled fast reactor,secondary circuit subcooled water under high pressure is injected into an ordinary-pressure primary vessel,where a molten lead-based alloy(typically pure lead or lead-bismuth eutectic(LBE))is used as the coolant.To clarify the pressure build-up characteristics under water-jet injection,this study conducted several experiments by injecting pressurized water into a molten LBE pool at Sun Yat-sen University.To obtain a further understanding,several new experimental parameters were adopted,including the melt temperature,water subcooling,injection pressure,injection duration,and nozzle diameter.Through detailed analyses,it was found that the pressure and temperature during the water-melt interaction exhibited a consistent variation trend with our previous water-droplet injection mode LBE experiment.Similarly,the existence of a steam explosion was confirmed,which typically results in a much stronger pressure build-up.For the non-explosion cases,increasing the injection pressure,melt-pool temperature,nozzle diameter,and water subcooling promoted pressure build-up in the melt pool.However,a limited enhancement effect was observed when increasing the injection duration,which may be owing to the continually rising pressure in the interaction vessel or the isolation effect of the generated steam cavity.Regardless of whether a steam explosion occurred,the calculated mechanical and kinetic energy conversion efficiencies of the melt were relatively small(not exceeding 4.1%and 0.7%,respectively).Moreover,the range of the conversion efficiency was similar to that of previous water-droplet experiments,although the upper limit of the jet mode was slightly lower.
文摘Neuromyelitis optica spectrum disorders are neuroinflammatory demyelinating disorders that lead to permanent visual loss and motor dysfunction.To date,no effective treatment exists as the exact causative mechanism remains unknown.Therefore,experimental models of neuromyelitis optica spectrum disorders are essential for exploring its pathogenesis and in screening for therapeutic targets.Since most patients with neuromyelitis optica spectrum disorders are seropositive for IgG autoantibodies against aquaporin-4,which is highly expressed on the membrane of astrocyte endfeet,most current experimental models are based on aquaporin-4-IgG that initially targets astrocytes.These experimental models have successfully simulated many pathological features of neuromyelitis optica spectrum disorders,such as aquaporin-4 loss,astrocytopathy,granulocyte and macrophage infiltration,complement activation,demyelination,and neuronal loss;however,they do not fully capture the pathological process of human neuromyelitis optica spectrum disorders.In this review,we summarize the currently known pathogenic mechanisms and the development of associated experimental models in vitro,ex vivo,and in vivo for neuromyelitis optica spectrum disorders,suggest potential pathogenic mechanisms for further investigation,and provide guidance on experimental model choices.In addition,this review summarizes the latest information on pathologies and therapies for neuromyelitis optica spectrum disorders based on experimental models of aquaporin-4-IgG-seropositive neuromyelitis optica spectrum disorders,offering further therapeutic targets and a theoretical basis for clinical trials.
基金Natural Science Foundation of Hubei Province(2024AFB432)National Natural Science Foundation of China(52171045,12302436,52302095)Research Fund of Jianghan University(2023JCYJ05)。
文摘Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and their acoustic properties were characterized to match the design path.The parallelism of the Al-Cu GM was confirmed using a three-dimensional surface profilometry machine.A one-stage light-gas gun was used to launch the Al-Cu GM,impacting an Al-LiF target at a velocity of 400 m/s.The results of the experimental strain rate demonstrate that the Al-Cu GMs can realize the precise control of the strain rate within the range of 10^(4)‒10^(5)/s in the high-speed impact experiments.
基金supported by National Natural Science Foundation of China(Project No.51878156,received by Wen-Wei Wang) and EPC Innovation Consulting Project for Longkou Nanshan LNG Phase I Receiving Terminal(Z2000LGENT0399,received by Wen-Wei Wang and ZhaoJun Zhang).
文摘This study aimed to investigate the moment redistribution in continuous glass fiber reinforced polymer(GFRP)-concrete composite slabs caused by concrete cracking and steel bar yielding in the negative bending moment zone.An experimental bending moment redistribution test was conducted on continuous GFRP-concrete composite slabs,and a calculation method based on the conjugate beam method was proposed.The composite slabs were formed by combining GFRP profiles with a concrete layer and supported on steel beams to create two-span continuous composite slab specimens.Two methods,epoxy resin bonding,and stud connection,were used to connect the composite slabs with the steel beams.The experimental findings showed that the specimen connected with epoxy resin exhibited two moments redistribution phenomena during the loading process:concrete cracking and steel bar yielding at the internal support.In contrast,the composite slab connected with steel beams by studs exhibited only one-moment redistribution phenomenon throughout the loading process.As the concrete at the internal support cracked,the bending moment decreased in the internal support section and increased in the midspan section.When the steel bars yielded,the bending moment further decreased in the internal support section and increased in the mid-span section.Since GFRP profiles do not experience cracking,there was no significant decrease in the bending moment of the mid-span section.All test specimens experienced compressive failure of concrete at the mid-span section.Calculation results showed good agreement between the calculated and experimental values of bending moments in the mid-span section and internal support section.The proposed model can effectively predict the moment redistribution behavior of continuous GFRP-concrete composite slabs.
