As a novel lightweight metallic material with excellent heat and corrosion resistance,elastic disordered microporous metal rubber(EDMMR)functions as an effective damping and support element in high-temperature environ...As a novel lightweight metallic material with excellent heat and corrosion resistance,elastic disordered microporous metal rubber(EDMMR)functions as an effective damping and support element in high-temperature environments where traditional polymer rubber fails.In this paper,a multi-scale finite element model for EDMMR is constructed using virtual manufacturing technology(VMT).Thermo-mechanical coupling analysis reveals a distinct inward expansion and dissipation phenomenon in EDMMR under high-temperature conditions,distinguishing it from porous materials.This phenomenon has the potential to impact the overall dimensions of EDMMR through transmission and accumulation processes.The experimental results demonstrate a random distribution of internal micro springs in EDMMR,considering the contact composition of spring microelements and the pore structure.By incorporating material elasticity,a predictive method for the thermal expansion coefficient of EDMMR based on the Schapery model is proposed.Additionally,standardized processes are employed to manufacture multiple sets of cylindrical EDMMR samples with similar dimensions but varying porosities.Thermal expansion tests are conducted on these samples,and the accuracy of the predicted thermal expansion coefficient is quantitatively validated through residual analysis.This research indicates that EDMMR maintains good structural stability in high-temperature environments.The thermal expansion rate of the material exhibits an opposite trend to the variation of elastic modulus with temperature,as the porosity rate changes.展开更多
Mg alloys have the defects of low stiffness,low strength,and high coefficient of thermal expansion(CTE).The composites strategy and its architecture design are effective approaches to improve the comprehensive perform...Mg alloys have the defects of low stiffness,low strength,and high coefficient of thermal expansion(CTE).The composites strategy and its architecture design are effective approaches to improve the comprehensive performance of materials,but the processing difficulty,especially in ceramics forming,limits the control and innovation of material architecture.Here,combined with 3D printing and squeeze infiltration technology,two precisely controllable architectures of AZ91/Al_(2)O_(3)interpenetrating phase composites(IPC)with ceramic scaffold were prepared.The interface,properties and impact of different architecture on IPC performance were studied by experiments and finite element simulation.The metallurgical bonding of the interface was realized with the formation of MgAl_(2)O_(4)reaction layer.The IPC with 1 mm circular hole scaffold(1C-IPC)exhibited significantly improved elastic modulus of 164 GPa,high compressive strength of 680 MPa,and good CTE of 12.91×10^(-6)K^(−1),which were 3.64 times,1.98 times and 55%of the Mg matrix,respectively.Their elastic modulus,compressive strength,and CTE were superior to the vast majority of Mg alloys and Mg based composites.The reinforcement and matrix were bicontinuous and interpenetrating each other,which played a critical role in ensuring the potent strengthening effect of the Al_(2)O_(3)reinforcement by efficient load transfer.Under the same volume fraction of reinforcements,compared to IPC with 1 mm hexagonal hole scaffold(1H-IPC),the elastic modulus and compressive strength of 1C-IPC increased by 15%and 28%,respectively,which was due to the reduced stress concentration and more uniform stress distribution of 1C-IPC.It shows great potential of architecture design in improving the performance of composites.This study provides architectural design strategy and feasible preparation method for the development of high performance materials.展开更多
On the basis of the uniform design method, six kinds of martensitic hot work die steels were designed. The phase transformation temperatures including Ac1 , Ac3 , and Ms were measured by DIL805A quenching dilatometer....On the basis of the uniform design method, six kinds of martensitic hot work die steels were designed. The phase transformation temperatures including Ac1 , Ac3 , and Ms were measured by DIL805A quenching dilatometer. The influences of the main elements on phase transformation temperatures were analyzed by quadratic stepwise regression analysis, and three corresponding equations were obtained. These equations, in which the interactions of the elements were considered, showed more effectiveness than the traditional ones. In addition, the thermal expansion coefficients of these steels in annealed state and quenched state were also obtained during the tests. The influences of chemical composition and temperature on the thermal expansion coefficient were analyzed; the equations obtained were verified by using several kinds of steels. The predicted values were in accordance with the results of the experiments.展开更多
The formulas for atomic displacements and Hamiltonian of a thin crystal film in phonon occupation number representation are obtained with the aid of Green's function theory. On the basis of these results, the form...The formulas for atomic displacements and Hamiltonian of a thin crystal film in phonon occupation number representation are obtained with the aid of Green's function theory. On the basis of these results, the formulas for thermal expansion coefficients of the thin crystal film are derived with the perturbation theory, and the numerical calculations are carried out. The results show that the thinner films have larger thermal expansion coefficients.展开更多
Usually the thermal expansion coefficients (TEC) of metals are higher than that of porcelains. In order to match the TECs in the case of coating porcelains on metals, high TEC porcelains are needed. In this research, ...Usually the thermal expansion coefficients (TEC) of metals are higher than that of porcelains. In order to match the TECs in the case of coating porcelains on metals, high TEC porcelains are needed. In this research, the high TEC phase leucite (KAlSi2 O6) in the high TEC porcelain was prepared by sol-gel method. The crystal size of leucite made by sol-gel is about 77nm through controlling the process parameters. The process from xerogel to leucite was investigated by means of DSC (differential scanning calorimetry), TG (thermogravimetry), XRD ( X-ray diffraction) and IR (infrared absorption spectrum). Leucite had been detected after the gel was treated at 900℃, this formation temperature is about 250℃ lower than that of melting method. The porcelain made from 50% of the leucite powder and 50% of low fused temperature frit has an average TEC of 19.2×10-6/℃ C from room temperature to 450℃, which is much higher than the common porcelains.展开更多
This study evaluated the adhesion of zirconia core ceramics with their corresponding veneering ceramics, having different thermal expansion coefficients （TECs）, when zirconia ceramics were coloured at green stage. Z...This study evaluated the adhesion of zirconia core ceramics with their corresponding veneering ceramics, having different thermal expansion coefficients （TECs）, when zirconia ceramics were coloured at green stage. Zirconia blocks （N=240; 6 mm x 7 mm x 7 mm） were manufactured from two materials namely, ICE Zirconia （Group 1） and Prettau Zirconia （Group 2）. In their green stage, they were randomly divided into two groups. Half of the specimens were coloured with colouring liquid （shade A2）, Three different veneering ceramics with different TEC （ICE Ceramic, GC Initial Zr and IPS e.max Ceram） were fired on both coloured and non-coloured zirconia cores. Specimens of high noble alloys （Esteticor Plus） veneered with ceramic （VM 13） （n= 16） acted as the control group. Core-veneer interface of the specimens were subjected to shear force in the Universal Testing Machine （0.5 mm-min-1）. Neither the zirconia core material （P=0.318） nor colouring （P=0.188） significantly affected the results （three-way analysis of variance, Tukey＇s test）. But the results were significantly affected by the veneering ceramic （P=0.000）. Control group exhibited significantly higher mean bond strength values （45.7__.8） MPa than all other tested groups （（27.1__.4.1）-（39.7__.4.7） and （27.4__.5.6）-（35.9___4.7） MPa with and without colouring, respectively） （P^0.001）. While in zirconia-veneer test groups, predominantly mixed type of failures were observed with the veneering ceramic covering ~ 1/3 of the substrate surface, in the metal-ceramic group, veneering ceramic was left adhered 1/3 of the metal surface. Colouring zirconia did not impair adhesion of veneering ceramic, but veneering ceramic had a significant influence on the core-veneer adhesion. Metal-ceramic adhesion was more reliable than all zirconia-veneer ceramics tested.展开更多
We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifte...We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifted by a pair of aeousto-optic modulators and then the heterodyne phase measurement technique is used. The sample measured is placed in a muffle furnace with two coaxial holes opened on the opposite furnace walls. The measurement beams hit perpendicularly and coaxially on each surface of the sample. The reference beams hit on the reference mirror and the high-refiectivity mirror, respectively. By the heterodyne configuration and computing, the influences of the vibration, distortion of the sample supporter and the effect of variations in the refractive index are measured and largely minimized. For validation, the TECs of aluminum samples are determined in the temperature range of 29-748K, confirming not only the precision within 5 × 10-7 K-1 and the accuracy within 0.4% from 298K to 448K but also the high sensitivity non-contact measurement of the lower reflectivity surface induced by the sample oxidization from 448 K to 748 K.展开更多
The accurate measurement on the compressibility and thermal expansion coefficients of density standard liquid at 2329kg/m3（DSL-2329） plays an important role in the quality control for silicon single crystal manufact...The accurate measurement on the compressibility and thermal expansion coefficients of density standard liquid at 2329kg/m3（DSL-2329） plays an important role in the quality control for silicon single crystal manufacturing. A new method is developed based on hydrostatic suspension principle in order to determine the two coefficients with high measurement accuracy. Two silicon single crystal samples with known density are immersed into a sealed vessel full of DSL-2329. The density of liquid is adjusted with varying liquid temperature and static pressure, so that the hydrostatic suspension of two silicon single crystal samples is achieved. The compression and thermal expansion coefficients are then calculated by using the data of temperature and static pressure at the suspension state. One silicon single crystal sample can be suspended at different state, as long as the liquid temperature and static pressure function linearly according to a certain mathematical relationship. A hydrostatic suspension experimental system is devised with the maximal temperature control error ±50 μK; Silicon single crystal samples can be suspended by adapting the pressure following the PID method. By using the method based on hydrostatic suspension principle, the two key coefficients can be measured at the same time, and measurement precision can be improved due to avoiding the influence of liquid surface tension. This method was further validated experimentally, where the mixture of 1, 2, 3-tribromopropane and 1,2-dibromoethane is used as DSL-2329. The compressibility and thermal expansion coefficients were measured, as 8.5′10–4 K–1 and 5.4′10–10 Pa–1, respectively.展开更多
This paper proposes a novel method of multi-beam laser heterodyne measurement for metal linear expansion coefficient. Based on the Doppler effect and heterodyne technology, the information is loaded of length variatio...This paper proposes a novel method of multi-beam laser heterodyne measurement for metal linear expansion coefficient. Based on the Doppler effect and heterodyne technology, the information is loaded of length variation to the frequency difference of the multi-beam laser heterodyne signal by the frequency modulation of the oscillating mirror, this method can obtain many values of length variation caused by temperature variation after the multi-beam laser heterodyne signal demodulation simultaneously. Processing these values by weighted-average, it can obtain length variation accurately, and eventually obtain the value of linear expansion coefficient of metal by the calculation. This novel method is used to simulate measurement for linear expansion coefficient of metal rod under different temperatures by MATLAB, the obtained result shows that the relative measurement error of this method is just 0.4%.展开更多
Effects of the pressure direction on the thermal expansion and slag corrosion resistance were investigated and anisotropic microstructures of flaky graphite in spinel carbon bricks were examined. The experimental res...Effects of the pressure direction on the thermal expansion and slag corrosion resistance were investigated and anisotropic microstructures of flaky graphite in spinel carbon bricks were examined. The experimental results show that slag corrosion velocities in the direction parallel to the pressure direction display a decrease of 34% compared to those in the vertical direction. Meantime, the linear expansion coefficient in the direction parallel to the pressure direction is 2.45 times as large as that in the vertical pressure direction. Slag corrosion velocities of spinel carbon bricks soaked in the AOD melting slag display a 46%-47% decrease compared to those of magnesia carbon bricks. The microstructure observation shows that spinel carbon bricks have a high degree of preferred orientation.展开更多
The basic glass of Li2O-Al2O3-SiO2 system using P2O5 as nucleator was prepared by means of conventional melt quenching technology, and the heat-treatment process was determined by using differential thermal analysis. ...The basic glass of Li2O-Al2O3-SiO2 system using P2O5 as nucleator was prepared by means of conventional melt quenching technology, and the heat-treatment process was determined by using differential thermal analysis. The crystalline phases and the microstructure of the glass-ceramics were investigated by using X-ray diffraction and scanning electron microscopy. The results show that the glass based on Li2O-Al2O3-SiO2 oxides using P2O5 as nucleator can be prepared at lower melt temperature of 1 450 ℃ and the glass-ceramics with lower thermal expansion coefficient of 21.6×10-7 ℃-1 can also be obtained at 750 ℃. The glass-ceramics contain a few crystal phases in which the main crystal phase is β-quartz solid solution and the second crystal phase is β-spodumene solid solution. When the heat treatment temperature is not higher than 650 ℃, the transparent glass-ceramics containing β-quartz solid solution can be prepared. β-quartz solid solution changes into β-spodumene solid solution at about 750 ℃. And the appearance of the glass-ceramics changes from translucent, part opaque to complete opaque with increasing （temperature.）展开更多
Thermal expansion is a common phenomenon in both metals and alloys, which is important for metallic material applications in modern industry, especially in nuclear and aerospace industries. A lower thermal expansion c...Thermal expansion is a common phenomenon in both metals and alloys, which is important for metallic material applications in modern industry, especially in nuclear and aerospace industries. A lower thermal expansion coefficient may cause lower thermal stress and higher accuracy. A new Zr-based alloy is developed and presented.The XRD diffraction results demonstrate that only a close-packed hexagonal phase（α or α＇ phase） exists in the microstructure. The thermal expansion and mechanical properties are studied. According to the experimental results, the new Zr-based alloy presents a low thermal expansion coefficient and good mechanical properties.Also,its thermal expansion coefficient is stable through solution treatment.展开更多
With Al2O3, Dy2O3, and SiO2 as starting materials, the basic glass of Al2O3-Dy2O3-SiO2 system was prepared by conventional melting technology, and their thermal expansion coefficients （TECs） at different anneal time...With Al2O3, Dy2O3, and SiO2 as starting materials, the basic glass of Al2O3-Dy2O3-SiO2 system was prepared by conventional melting technology, and their thermal expansion coefficients （TECs） at different anneal time were investigated. TECs of the basic glass, which were heat-treated under different temperature, were also investigated. The result showed that TECs of the basic glass gradually approached a fixed value as the anneal time was extended, which suggested that most of the inner stress had been eliminated. After heat treatment, the contents of Dy2O3, Dy2Si2O7, and a new crystal increased up to 1200 ℃ and decreased below 1250 ℃, which was consistent with the TEC change of crystallized samples. This suggests that the crystal has a direct effect on TECs of the crystallized samples.展开更多
Cordierite ceramics were prepared by using talc, bauxite and kaolin clay as starting materials. According to the detected resuh of XRD step-scanning from 25° to 35° by a high temperature X-ray diffractometer...Cordierite ceramics were prepared by using talc, bauxite and kaolin clay as starting materials. According to the detected resuh of XRD step-scanning from 25° to 35° by a high temperature X-ray diffractometer, 20 and d values of five peaks of cordierite crystal were ascer- rained. Then the least squares technique was used to cal- culate the crystal parameters ： at 25 ℃ , a = b = O. 981 8 nm, c =0. 927 4 nm, V=O. 774 3 nm3 ; at 600 ℃ , a =b =O. 982 0 nm, c=0.9252 nm, V=O. 773 5 nm3. The crystal volumetric coefficient of thermal expansion （CTE） and linear CTE along a and c axes were calcu- lated, αv = 2. 33 × 10-6℃-1, αa = αb, = 3. 27 × 10-6℃ -1 , αc = -4.19 ×10-6℃ -1. The average CTE of cordierite crystal is as low as O. 78 × 10-6℃ -1展开更多
In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transver...In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.展开更多
Firstly,the relation between the coefficient of thermal expansion(CTE)and the volume fraction of TiO_(2) was investigated, and also the influence of relative density of ceramic on the CTE was studied.The results show ...Firstly,the relation between the coefficient of thermal expansion(CTE)and the volume fraction of TiO_(2) was investigated, and also the influence of relative density of ceramic on the CTE was studied.The results show that the volume fraction of TiO_(2) and the relative density both make influence on the CTE of ZrO_(2)-TiO_(2) ceramic.According to the results,the ZrO_(2)-TiO_(2)(volume fraction of TiO_(2) is 27%)ceramic die with the similar CTE(8.92×10^(-6) ℃^(-1))to Ti6Al4V was fabricated.Secondly,to evaluate the dimensional accuracy of the workpiece superplastically formed,the Ti6Al4V impression experiment was performed.The result shows that the dimensional inaccuracy of workpiece is 0.003.Thirdly,in order to evaluate the practicability,the experiment of superplastic forming Ti6Al4V using ZrO_(2)-TiO_(2) cylinder ceramic die was carried out.The Ti6Al4V cylinder shows good shape retention and surface quality,and high dimensional accuracy.The ceramic dies seem to be adequate for superplastic forming the high accuracy Ti6Al4V, and the trials have confirmed the potential of the ZrO_(2)-TiO_(2) ceramic die.展开更多
By using the uptodate temperatuer-stress testing machine, the thermal expansion coefficient of concrete at early ages was studied and indicative conclusions were achieved ： temperature rising due to hydration heat is...By using the uptodate temperatuer-stress testing machine, the thermal expansion coefficient of concrete at early ages was studied and indicative conclusions were achieved ： temperature rising due to hydration heat is not directly correlated with cracking, but the temperature and stress evolation process should be taken into consideration in the same time. Proper chemical admixtures and mineral cornpasitions can improve the mechanical properties of concrete such as thermal expansion coefficient, which is very indicative in practice.展开更多
In thermodynamics,volume is an essential extensive variable.Strain-line,area,or volume change-therefore offers a direct window into correlated quantum matter:tiny length changesΔL track how the lattice responds when ...In thermodynamics,volume is an essential extensive variable.Strain-line,area,or volume change-therefore offers a direct window into correlated quantum matter:tiny length changesΔL track how the lattice responds when state variables such as magnetic field H and/or temperature T are varied,revealing phases,transitions,and dynamics.展开更多
Focusing on the ultralow expansion functionality of the crystalized glass containing the cordierite crystal phase with the molar composition 20.7MgO·20.7Al_(2)O_(3)·51.6SiO_(2)·7.0TiO_(2),we systematica...Focusing on the ultralow expansion functionality of the crystalized glass containing the cordierite crystal phase with the molar composition 20.7MgO·20.7Al_(2)O_(3)·51.6SiO_(2)·7.0TiO_(2),we systematically investigated impacts of thermal treatment protocols on T dependence of coefficients of thermal expansion(CTE).Except for the phase compositions,morphology is identified as another important factor to control the T dependence of CTE.By using X-ray diffraction and scanning electron microscope,various modes of T dependence of CTE for crystallized glasses are ascribed to their different phase compositions and microstructure with finely dispersed nanoparticles.These understanding contributes to the further modification of CTE of the crystalized glass by altering their thermal treatment scenarios.展开更多
Demand for high-performance power devices continues to grow with the continuous development of power electronics and high-end field applications.Although packaging materials based on epoxy resins and silica gels have ...Demand for high-performance power devices continues to grow with the continuous development of power electronics and high-end field applications.Although packaging materials based on epoxy resins and silica gels have been widely developed,higher operating temperatures and operating voltages are still critical to the performance of power devices.Here,a composite film containing functionalized meso-porous hollow silica particles(MH-SiO_(2))and polyimide(PI)was prepared by a template method and layer-by-layer coating strategy to address the current bottlenecks in packaging material development.The electrical breakdown strength of the prepared PI/SiO_(2) composite film was 323.41 kV/mm,while the mass fraction of MH-SiO_(2) was only 5%.This indicates that the mesoporous structure can effectively inhibit electron collisions with nano-restricted domains.The simulation results also indicate that the size variation of inorganic fillers and the interaction of organic/inorganic heterogeneous interfaces are the main reasons affecting the performance of the composites.Meanwhile,the PI/SiO_(2) composite films achieved other properties required for practical applications,such as matched coefficient of thermal ex-pansion(CTE)(23.5 ppm/℃),excellent thermal stability(T_(5)%=559.0℃)and low dielectric constant(2.27@1 M Hz).These results highlight the great potential of inorganic phase-specific structural designs for the preparation of high-performance power device packaging materials.展开更多
基金Supported by National Natural Science Foundation of China(Grant Nos.U2330202,52175162,51805086,51975123)Fujian Provincial Technological Innovation Key Research and Industrialization Projects(Grant Nos.2023XQ005,2024XQ010)Project of Guangdong Provincial Science and Technology Bureau of Jiangmen City(Grant No.2023780200030009506)。
文摘As a novel lightweight metallic material with excellent heat and corrosion resistance,elastic disordered microporous metal rubber(EDMMR)functions as an effective damping and support element in high-temperature environments where traditional polymer rubber fails.In this paper,a multi-scale finite element model for EDMMR is constructed using virtual manufacturing technology(VMT).Thermo-mechanical coupling analysis reveals a distinct inward expansion and dissipation phenomenon in EDMMR under high-temperature conditions,distinguishing it from porous materials.This phenomenon has the potential to impact the overall dimensions of EDMMR through transmission and accumulation processes.The experimental results demonstrate a random distribution of internal micro springs in EDMMR,considering the contact composition of spring microelements and the pore structure.By incorporating material elasticity,a predictive method for the thermal expansion coefficient of EDMMR based on the Schapery model is proposed.Additionally,standardized processes are employed to manufacture multiple sets of cylindrical EDMMR samples with similar dimensions but varying porosities.Thermal expansion tests are conducted on these samples,and the accuracy of the predicted thermal expansion coefficient is quantitatively validated through residual analysis.This research indicates that EDMMR maintains good structural stability in high-temperature environments.The thermal expansion rate of the material exhibits an opposite trend to the variation of elastic modulus with temperature,as the porosity rate changes.
基金supported by the National Key Research and Development Program of China(No.2022YFB3708400)the National Natural Science Foundation of China(No.52305158)+1 种基金the Young Elite Scientists Sponsorship Program by CAST(No.2022QNRC001)the Science Innovation Foundation of Shanghai Academy of Spaceflight Technology(No.USCAST2021-18).
文摘Mg alloys have the defects of low stiffness,low strength,and high coefficient of thermal expansion(CTE).The composites strategy and its architecture design are effective approaches to improve the comprehensive performance of materials,but the processing difficulty,especially in ceramics forming,limits the control and innovation of material architecture.Here,combined with 3D printing and squeeze infiltration technology,two precisely controllable architectures of AZ91/Al_(2)O_(3)interpenetrating phase composites(IPC)with ceramic scaffold were prepared.The interface,properties and impact of different architecture on IPC performance were studied by experiments and finite element simulation.The metallurgical bonding of the interface was realized with the formation of MgAl_(2)O_(4)reaction layer.The IPC with 1 mm circular hole scaffold(1C-IPC)exhibited significantly improved elastic modulus of 164 GPa,high compressive strength of 680 MPa,and good CTE of 12.91×10^(-6)K^(−1),which were 3.64 times,1.98 times and 55%of the Mg matrix,respectively.Their elastic modulus,compressive strength,and CTE were superior to the vast majority of Mg alloys and Mg based composites.The reinforcement and matrix were bicontinuous and interpenetrating each other,which played a critical role in ensuring the potent strengthening effect of the Al_(2)O_(3)reinforcement by efficient load transfer.Under the same volume fraction of reinforcements,compared to IPC with 1 mm hexagonal hole scaffold(1H-IPC),the elastic modulus and compressive strength of 1C-IPC increased by 15%and 28%,respectively,which was due to the reduced stress concentration and more uniform stress distribution of 1C-IPC.It shows great potential of architecture design in improving the performance of composites.This study provides architectural design strategy and feasible preparation method for the development of high performance materials.
基金Item Sponsored by Shanghai Leading Academic Discipline Project(T0101)Science and Technology Commission of Shanghai Municipality(065211028)
文摘On the basis of the uniform design method, six kinds of martensitic hot work die steels were designed. The phase transformation temperatures including Ac1 , Ac3 , and Ms were measured by DIL805A quenching dilatometer. The influences of the main elements on phase transformation temperatures were analyzed by quadratic stepwise regression analysis, and three corresponding equations were obtained. These equations, in which the interactions of the elements were considered, showed more effectiveness than the traditional ones. In addition, the thermal expansion coefficients of these steels in annealed state and quenched state were also obtained during the tests. The influences of chemical composition and temperature on the thermal expansion coefficient were analyzed; the equations obtained were verified by using several kinds of steels. The predicted values were in accordance with the results of the experiments.
文摘The formulas for atomic displacements and Hamiltonian of a thin crystal film in phonon occupation number representation are obtained with the aid of Green's function theory. On the basis of these results, the formulas for thermal expansion coefficients of the thin crystal film are derived with the perturbation theory, and the numerical calculations are carried out. The results show that the thinner films have larger thermal expansion coefficients.
基金This research was funded by the National High Technology Research and Development Program of China(Grant No.2002AA302204)Science and Technology Program of Guangdong Provrince of China(Grant No.2001A1070102).
文摘Usually the thermal expansion coefficients (TEC) of metals are higher than that of porcelains. In order to match the TECs in the case of coating porcelains on metals, high TEC porcelains are needed. In this research, the high TEC phase leucite (KAlSi2 O6) in the high TEC porcelain was prepared by sol-gel method. The crystal size of leucite made by sol-gel is about 77nm through controlling the process parameters. The process from xerogel to leucite was investigated by means of DSC (differential scanning calorimetry), TG (thermogravimetry), XRD ( X-ray diffraction) and IR (infrared absorption spectrum). Leucite had been detected after the gel was treated at 900℃, this formation temperature is about 250℃ lower than that of melting method. The porcelain made from 50% of the leucite powder and 50% of low fused temperature frit has an average TEC of 19.2×10-6/℃ C from room temperature to 450℃, which is much higher than the common porcelains.
文摘This study evaluated the adhesion of zirconia core ceramics with their corresponding veneering ceramics, having different thermal expansion coefficients （TECs）, when zirconia ceramics were coloured at green stage. Zirconia blocks （N=240; 6 mm x 7 mm x 7 mm） were manufactured from two materials namely, ICE Zirconia （Group 1） and Prettau Zirconia （Group 2）. In their green stage, they were randomly divided into two groups. Half of the specimens were coloured with colouring liquid （shade A2）, Three different veneering ceramics with different TEC （ICE Ceramic, GC Initial Zr and IPS e.max Ceram） were fired on both coloured and non-coloured zirconia cores. Specimens of high noble alloys （Esteticor Plus） veneered with ceramic （VM 13） （n= 16） acted as the control group. Core-veneer interface of the specimens were subjected to shear force in the Universal Testing Machine （0.5 mm-min-1）. Neither the zirconia core material （P=0.318） nor colouring （P=0.188） significantly affected the results （three-way analysis of variance, Tukey＇s test）. But the results were significantly affected by the veneering ceramic （P=0.000）. Control group exhibited significantly higher mean bond strength values （45.7__.8） MPa than all other tested groups （（27.1__.4.1）-（39.7__.4.7） and （27.4__.5.6）-（35.9___4.7） MPa with and without colouring, respectively） （P^0.001）. While in zirconia-veneer test groups, predominantly mixed type of failures were observed with the veneering ceramic covering ~ 1/3 of the substrate surface, in the metal-ceramic group, veneering ceramic was left adhered 1/3 of the metal surface. Colouring zirconia did not impair adhesion of veneering ceramic, but veneering ceramic had a significant influence on the core-veneer adhesion. Metal-ceramic adhesion was more reliable than all zirconia-veneer ceramics tested.
基金Supported by the National Natural Science Foundation of China under Grant No F050306
文摘We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifted by a pair of aeousto-optic modulators and then the heterodyne phase measurement technique is used. The sample measured is placed in a muffle furnace with two coaxial holes opened on the opposite furnace walls. The measurement beams hit perpendicularly and coaxially on each surface of the sample. The reference beams hit on the reference mirror and the high-refiectivity mirror, respectively. By the heterodyne configuration and computing, the influences of the vibration, distortion of the sample supporter and the effect of variations in the refractive index are measured and largely minimized. For validation, the TECs of aluminum samples are determined in the temperature range of 29-748K, confirming not only the precision within 5 × 10-7 K-1 and the accuracy within 0.4% from 298K to 448K but also the high sensitivity non-contact measurement of the lower reflectivity surface induced by the sample oxidization from 448 K to 748 K.
基金Supported by National Natural Science Foundation of China(Grant No.51105347)National Key Technology R&D Program of Ministry of Science and Technology of China(Grant No.2011BAI02B03)
文摘The accurate measurement on the compressibility and thermal expansion coefficients of density standard liquid at 2329kg/m3（DSL-2329） plays an important role in the quality control for silicon single crystal manufacturing. A new method is developed based on hydrostatic suspension principle in order to determine the two coefficients with high measurement accuracy. Two silicon single crystal samples with known density are immersed into a sealed vessel full of DSL-2329. The density of liquid is adjusted with varying liquid temperature and static pressure, so that the hydrostatic suspension of two silicon single crystal samples is achieved. The compression and thermal expansion coefficients are then calculated by using the data of temperature and static pressure at the suspension state. One silicon single crystal sample can be suspended at different state, as long as the liquid temperature and static pressure function linearly according to a certain mathematical relationship. A hydrostatic suspension experimental system is devised with the maximal temperature control error ±50 μK; Silicon single crystal samples can be suspended by adapting the pressure following the PID method. By using the method based on hydrostatic suspension principle, the two key coefficients can be measured at the same time, and measurement precision can be improved due to avoiding the influence of liquid surface tension. This method was further validated experimentally, where the mixture of 1, 2, 3-tribromopropane and 1,2-dibromoethane is used as DSL-2329. The compressibility and thermal expansion coefficients were measured, as 8.5′10–4 K–1 and 5.4′10–10 Pa–1, respectively.
基金Project supported by the National Natural Science Foundation of China(Grant No.60577032)
文摘This paper proposes a novel method of multi-beam laser heterodyne measurement for metal linear expansion coefficient. Based on the Doppler effect and heterodyne technology, the information is loaded of length variation to the frequency difference of the multi-beam laser heterodyne signal by the frequency modulation of the oscillating mirror, this method can obtain many values of length variation caused by temperature variation after the multi-beam laser heterodyne signal demodulation simultaneously. Processing these values by weighted-average, it can obtain length variation accurately, and eventually obtain the value of linear expansion coefficient of metal by the calculation. This novel method is used to simulate measurement for linear expansion coefficient of metal rod under different temperatures by MATLAB, the obtained result shows that the relative measurement error of this method is just 0.4%.
文摘Effects of the pressure direction on the thermal expansion and slag corrosion resistance were investigated and anisotropic microstructures of flaky graphite in spinel carbon bricks were examined. The experimental results show that slag corrosion velocities in the direction parallel to the pressure direction display a decrease of 34% compared to those in the vertical direction. Meantime, the linear expansion coefficient in the direction parallel to the pressure direction is 2.45 times as large as that in the vertical pressure direction. Slag corrosion velocities of spinel carbon bricks soaked in the AOD melting slag display a 46%-47% decrease compared to those of magnesia carbon bricks. The microstructure observation shows that spinel carbon bricks have a high degree of preferred orientation.
文摘The basic glass of Li2O-Al2O3-SiO2 system using P2O5 as nucleator was prepared by means of conventional melt quenching technology, and the heat-treatment process was determined by using differential thermal analysis. The crystalline phases and the microstructure of the glass-ceramics were investigated by using X-ray diffraction and scanning electron microscopy. The results show that the glass based on Li2O-Al2O3-SiO2 oxides using P2O5 as nucleator can be prepared at lower melt temperature of 1 450 ℃ and the glass-ceramics with lower thermal expansion coefficient of 21.6×10-7 ℃-1 can also be obtained at 750 ℃. The glass-ceramics contain a few crystal phases in which the main crystal phase is β-quartz solid solution and the second crystal phase is β-spodumene solid solution. When the heat treatment temperature is not higher than 650 ℃, the transparent glass-ceramics containing β-quartz solid solution can be prepared. β-quartz solid solution changes into β-spodumene solid solution at about 750 ℃. And the appearance of the glass-ceramics changes from translucent, part opaque to complete opaque with increasing （temperature.）
基金Supported by the Postdoctoral Science Foundation of Hebei Province under Grant No B2017003008the National Natural Science Foundation of China under Grant Nos 51531005,51671166,51571174 and 51604241the Natural Science Foundation of Hebei Province under Grant No E2016203395
文摘Thermal expansion is a common phenomenon in both metals and alloys, which is important for metallic material applications in modern industry, especially in nuclear and aerospace industries. A lower thermal expansion coefficient may cause lower thermal stress and higher accuracy. A new Zr-based alloy is developed and presented.The XRD diffraction results demonstrate that only a close-packed hexagonal phase（α or α＇ phase） exists in the microstructure. The thermal expansion and mechanical properties are studied. According to the experimental results, the new Zr-based alloy presents a low thermal expansion coefficient and good mechanical properties.Also,its thermal expansion coefficient is stable through solution treatment.
基金Project supported by the Ministry of Science and Technology of China (2006CB601104)
文摘With Al2O3, Dy2O3, and SiO2 as starting materials, the basic glass of Al2O3-Dy2O3-SiO2 system was prepared by conventional melting technology, and their thermal expansion coefficients （TECs） at different anneal time were investigated. TECs of the basic glass, which were heat-treated under different temperature, were also investigated. The result showed that TECs of the basic glass gradually approached a fixed value as the anneal time was extended, which suggested that most of the inner stress had been eliminated. After heat treatment, the contents of Dy2O3, Dy2Si2O7, and a new crystal increased up to 1200 ℃ and decreased below 1250 ℃, which was consistent with the TEC change of crystallized samples. This suggests that the crystal has a direct effect on TECs of the crystallized samples.
基金financially supported by the National Natural Science Foundation of China (Grants No.51372229)the National Five-year Support Project(Grants No.2013BAE03B01)Zhengzhou Innovation Team(Grants No.131PCXTD602)
文摘Cordierite ceramics were prepared by using talc, bauxite and kaolin clay as starting materials. According to the detected resuh of XRD step-scanning from 25° to 35° by a high temperature X-ray diffractometer, 20 and d values of five peaks of cordierite crystal were ascer- rained. Then the least squares technique was used to cal- culate the crystal parameters ： at 25 ℃ , a = b = O. 981 8 nm, c =0. 927 4 nm, V=O. 774 3 nm3 ; at 600 ℃ , a =b =O. 982 0 nm, c=0.9252 nm, V=O. 773 5 nm3. The crystal volumetric coefficient of thermal expansion （CTE） and linear CTE along a and c axes were calcu- lated, αv = 2. 33 × 10-6℃-1, αa = αb, = 3. 27 × 10-6℃ -1 , αc = -4.19 ×10-6℃ -1. The average CTE of cordierite crystal is as low as O. 78 × 10-6℃ -1
文摘In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.
文摘Firstly,the relation between the coefficient of thermal expansion(CTE)and the volume fraction of TiO_(2) was investigated, and also the influence of relative density of ceramic on the CTE was studied.The results show that the volume fraction of TiO_(2) and the relative density both make influence on the CTE of ZrO_(2)-TiO_(2) ceramic.According to the results,the ZrO_(2)-TiO_(2)(volume fraction of TiO_(2) is 27%)ceramic die with the similar CTE(8.92×10^(-6) ℃^(-1))to Ti6Al4V was fabricated.Secondly,to evaluate the dimensional accuracy of the workpiece superplastically formed,the Ti6Al4V impression experiment was performed.The result shows that the dimensional inaccuracy of workpiece is 0.003.Thirdly,in order to evaluate the practicability,the experiment of superplastic forming Ti6Al4V using ZrO_(2)-TiO_(2) cylinder ceramic die was carried out.The Ti6Al4V cylinder shows good shape retention and surface quality,and high dimensional accuracy.The ceramic dies seem to be adequate for superplastic forming the high accuracy Ti6Al4V, and the trials have confirmed the potential of the ZrO_(2)-TiO_(2) ceramic die.
基金Founded by Hubei Key Loboratory of Roadway Bridge and Struc-ture Engineering( Wuhan University of Technology)
文摘By using the uptodate temperatuer-stress testing machine, the thermal expansion coefficient of concrete at early ages was studied and indicative conclusions were achieved ： temperature rising due to hydration heat is not directly correlated with cracking, but the temperature and stress evolation process should be taken into consideration in the same time. Proper chemical admixtures and mineral cornpasitions can improve the mechanical properties of concrete such as thermal expansion coefficient, which is very indicative in practice.
基金supported by the National Natural Science Foundation of China(12227806 and 12374081)the Open Research Fund of the Pulsed High Magnetic Field Facility(WHMFC2024007)Huazhong University of Science and Technology。
文摘In thermodynamics,volume is an essential extensive variable.Strain-line,area,or volume change-therefore offers a direct window into correlated quantum matter:tiny length changesΔL track how the lattice responds when state variables such as magnetic field H and/or temperature T are varied,revealing phases,transitions,and dynamics.
基金Funded by National Natural Science Foundation of China(No.52172007)Jiangsu Science and Technology Innovation Project for Carbon Peaking and Carbon Neutrality(No.BE2022035)。
文摘Focusing on the ultralow expansion functionality of the crystalized glass containing the cordierite crystal phase with the molar composition 20.7MgO·20.7Al_(2)O_(3)·51.6SiO_(2)·7.0TiO_(2),we systematically investigated impacts of thermal treatment protocols on T dependence of coefficients of thermal expansion(CTE).Except for the phase compositions,morphology is identified as another important factor to control the T dependence of CTE.By using X-ray diffraction and scanning electron microscope,various modes of T dependence of CTE for crystallized glasses are ascribed to their different phase compositions and microstructure with finely dispersed nanoparticles.These understanding contributes to the further modification of CTE of the crystalized glass by altering their thermal treatment scenarios.
基金supported by the National Natural Science Foundation of China(Nos.52377026 and 52301192)the Taishan Scholars and Young Experts Program of Shandong Province(No.tsqn202103057)+1 种基金the Natural Science Foundation of Shandong Province(Nos.ZR2024ME046 and ZR2024QE313)the China Postdoctoral Science Foundation(No.2024M761554).
文摘Demand for high-performance power devices continues to grow with the continuous development of power electronics and high-end field applications.Although packaging materials based on epoxy resins and silica gels have been widely developed,higher operating temperatures and operating voltages are still critical to the performance of power devices.Here,a composite film containing functionalized meso-porous hollow silica particles(MH-SiO_(2))and polyimide(PI)was prepared by a template method and layer-by-layer coating strategy to address the current bottlenecks in packaging material development.The electrical breakdown strength of the prepared PI/SiO_(2) composite film was 323.41 kV/mm,while the mass fraction of MH-SiO_(2) was only 5%.This indicates that the mesoporous structure can effectively inhibit electron collisions with nano-restricted domains.The simulation results also indicate that the size variation of inorganic fillers and the interaction of organic/inorganic heterogeneous interfaces are the main reasons affecting the performance of the composites.Meanwhile,the PI/SiO_(2) composite films achieved other properties required for practical applications,such as matched coefficient of thermal ex-pansion(CTE)(23.5 ppm/℃),excellent thermal stability(T_(5)%=559.0℃)and low dielectric constant(2.27@1 M Hz).These results highlight the great potential of inorganic phase-specific structural designs for the preparation of high-performance power device packaging materials.
