The process of disposing of expanded polystyrene (EPS) is by burning it in municipal incinerators. This process gives off EPS microplastics, which can find their way into water, food, blood, and major organ systems. Z...The process of disposing of expanded polystyrene (EPS) is by burning it in municipal incinerators. This process gives off EPS microplastics, which can find their way into water, food, blood, and major organ systems. Zophobas morio larvae are capable of consuming and breaking down EPS within their digestive tracts by minimizing the spread of microplastics. Studies of the consumption of EPS by Z. morio larvae are typically conducted under white or no visible light treatments. This study tested whether the color of visible light influenced the consumption rate of EPS by Z. morio larvae. If Z. morio larvae consume EPS under visible light, then visible light will influence the amount of EPS consumed. If results suggest that the consumption rate is influenced by visible light colors, then Z. morio larvae could be a solution for recycling EPS. This study’s procedure placed Z. morio larvae into 25 jars under one of six visible light treatments of red, yellow, green, blue, white, and no visible light. Each jar contained a pre-weighed block of EPS and six Z. morio larvae. After two weeks, the Z. morio larvae were removed from the jars, and the difference between each pre-weighed EPS block and the weight of the same partially consumed block was recorded in three trials. The data indicates that green and blue visible light treatments resulted in the greatest amount of EPS consumed by Z. morio larvae while the red and yellow had the least amount of EPS consumed by the Z. morio larvae. In conclusion, results indicate that green and blue visible light, compared to the no visible light treatment, could be used to influence the Z. morio larvae to consume more EPS. Green and blue visible light and Z. morio larvae could make the recycling process of EPS more environmentally friendly when used in households or by local environmental organizations.展开更多
The United States Food and Drug Administration's(FDA's)August 2024 determination that an additional phase Ⅱ study will be required to consider the approval of midomafetamine for the treatment of posttraumatic...The United States Food and Drug Administration's(FDA's)August 2024 determination that an additional phase Ⅱ study will be required to consider the approval of midomafetamine for the treatment of posttraumatic stress disorder(PTSD)could delay the potential approval of this promising treatment by several years.展开更多
Severe segregation and poor rheological properties in crumb rubber(CR)modified asphalt(CRMT)were addressed by investigating the performance improvement effect of organic expanded vermiculite(OEV)as a comodifier,while ...Severe segregation and poor rheological properties in crumb rubber(CR)modified asphalt(CRMT)were addressed by investigating the performance improvement effect of organic expanded vermiculite(OEV)as a comodifier,while the modification mechanism of the resulting asphalt was also elucidated.Vermiculite was thermally treated and chemically modified to enhance its interaction with the asphalt matrix and CR,improving dispersion and interfacial properties.CR/OEV/furfural extract oil(OIL)composite modified asphalt(COMT)was prepared in this study.The compatibility and microscopic mechanism of modified asphalt were characterized by dynamic shear rheological test,multiple stress creep recovery(MSCR)test,BBR test,thermal segregation test,fluorescent scanning test,infrared spectroscopy,and gel permeation chromatography.Rheological tests showed that the modified asphalt exhibited improved high-temperature stability,with increased G*/sin(δ)values,and better low-temperature flexibility.Storage stability tests showed a reduced softening point difference,indicating enhanced homogeneity and reduced segregation.Microscopic analysis revealed that OEV effectively optimized the microstructure of the composite system by promoting the uniform dispersion of CR within the asphalt matrix.Furthermore,the macromolecular weight of COMT was increased by 31.9%,molecular weight analysis confirmed a higher proportion of large molecular weight fractions,contributing to enhanced rheological properties and compatibility.These findings demonstrated that OEV significantly improved the performance and durability of CRMT,providing a promising approach for sustainable road construction.展开更多
In order to effectively improve the horizontal bearing capacity of pile foundations,this study proposes post-expanded arm grouting technology and associated pile foundations.The horizontal bearing characteristic of th...In order to effectively improve the horizontal bearing capacity of pile foundations,this study proposes post-expanded arm grouting technology and associated pile foundations.The horizontal bearing characteristic of the post-expanded arm grouting pile was explored through model tests.The test results indicate that the post-expanded arm grouting pile can increase the contact area between the pile and soil,and can improve the strength of the soil.The horizontal bearing capacity of the post-expanded arm grouting pile was approximately 3 times that of the conventional pile.It also shows that the larger the plate diameter ratio or grouting volume,the higher the horizontal bearing capacity of the post-expanded arm grouting pile.The maximum bending moment of the post-expanded arm grouting pile was located at the pile plate,and the displacement zero point of the new pile was higher than that of the conventional pile.The soil resistance at the pile plate was significantly higher than that of conventional piles,indicating that the pile plate effectively enhances the soil resistance.The improved p-y curve model and horizontal bearing capacity calculation method for the post-expanded arm grouting pile were proposed by considering the pile plate diameter factor.This method was finally verified by experimental results.The results of this study can provide a reference for calculating the horizontal bearing capacity of the post-expanded arm grouting pile.展开更多
An estimated 3%-4%of people are living with the hepatitis B virus(HBV),and without treatment,the risk of developing cirrhosis and hepatocellular cancer(HCC)is an omnipresent threat.Prevention of HCC is a major challen...An estimated 3%-4%of people are living with the hepatitis B virus(HBV),and without treatment,the risk of developing cirrhosis and hepatocellular cancer(HCC)is an omnipresent threat.Prevention of HCC is a major challenge,as the association between viral suppression and HCC risk reduction is multifactorial,involving the progressive depletion of hepatocytes through covalently closed circular DNA integration,as well as the prevention of liver fibrosis and cirrhosis.Despite effective and cheap antiviral treatment capable of suppressing HBV replication and thereby cirrhosis and HCC,the current indications for therapy need revision and more research to expand the gamut and treat more infected people.In this review,we discuss the possible expansion of antiviral treatment in chronic hepatitis B to prevent cirrhosis and,importantly,HCC.展开更多
Mixed polyanion phosphate Na_(4)Fe_(3)(PO_(4))_(2)P_(2)O_(7)(NFPP)is regarded as the most promising cathode material for sodium-ion batteries(SIBs),due to its high structural stability and low-cost environmental frien...Mixed polyanion phosphate Na_(4)Fe_(3)(PO_(4))_(2)P_(2)O_(7)(NFPP)is regarded as the most promising cathode material for sodium-ion batteries(SIBs),due to its high structural stability and low-cost environmental friendliness.However,its intrinsic low conductivity and sluggish Na^(+)diffusion restricted the fast-charge and low-temperature sodium storage.Herein,an NFPP composite encapsulated by in-situ pyrolytic carbon and coupled with expanded graphite(NFPP@C/EG)was constructed via a sol-gel method followed by a ballmill procedure.Due to the dual-carbon modified strategy,this NFPP@C/EG only enhanced the electronic conductivity,but also endowed more channels for Na^(+)diffusion.As cathode for SIBs,the optimized NFPP(M-NFPP@C/EG)delivers excellent rate capability(capacity of~80.5 mAh/g at 50 C)and outstanding cycling stability(11000 cycles at 50 C with capacity retention of 89.85%).Additionally,cyclic voltammetry(CV)confirmed that its sodium storage behavior is pseudocapacitance-controlled,with in-situ electrochemical impedance spectroscopy(EIS)further elucidating improvements in electrode reaction kinetics.At lower temperatures(0℃),M-NFPP@C/EG demonstrated exceptional cycling performance(8800 cycles at 10 C with capacity retention of 95.81%).Moreover,pouch cells also exhibited excellent stability.This research demonstrates the feasibility of a dual carbon modification strategy in enhancing NFPP and proposes a low-cost,high-rate,and ultra-stable cathode material for SIBs.展开更多
A binary eutectic mixture composed of tetradecanol(TD)and myristic acid(MA)was maximally absorbed into the microstructures of expanded perlite(EP)and expanded vermiculite(EVMT),respectively,through a self-made vacuum ...A binary eutectic mixture composed of tetradecanol(TD)and myristic acid(MA)was maximally absorbed into the microstructures of expanded perlite(EP)and expanded vermiculite(EVMT),respectively,through a self-made vacuum adsorption roller to prepare phase change material(PCM)particle(PCP).Then EP and EVMT-based composite PCM plates were respectively fabricated through a mold pressing method.The thermal property,chemical stability,microstructure and durability were characterized by differential scanning calorimeter(DSC),Fourier transform infrared spectroscope(FT-IR),scanning electron microscope(SEM)and thermal cycling tests,respectively.The results show that both PCPs have high latent heats with 110 J/g for EP-based PCP and more than 130 J/g for EVMT-based PCP,compact microstructure without PCM leakage,stable chemical property and good durability.The research results have proved the feasibility for the vacuum adsorption roller used in the composite PCM fabrication.Results of thermal storage performance experiment indicate that the fabricated PCM plates have better thermal inertia than common building materials,and the thermal storage performance of PCM plates has nonlinearly changed with outside air velocity and temperature increase.Therefore,PCM plates show a significant potential for the practical application of building thermal storage.展开更多
A new method for preparing expanded graphite-based composites （EGCs） was developed.The obtained samples were characterized by scanning electron microscopy （SEM）,transmission electron microscope （TEM） and nitroge...A new method for preparing expanded graphite-based composites （EGCs） was developed.The obtained samples were characterized by scanning electron microscopy （SEM）,transmission electron microscope （TEM） and nitrogen adsorption.The experimental results indicated that the EGCs was not simply mechanical mixture of EG and activated carbon,instead the activated carbon was coated on the surface of interior and external pores of the EG in the form of thin carbon layer.The thickness of the activated carbon layer was nearly one hundred nanometers by calculation.It was shown that the higher the impregnation ratio and the activation temperature were,the easier the porosity development would be.And the BET surface area and the total pore volume were as high as 1978 m2/g and 0.9917 cm3/g respectively at 350℃ with an impregnation ratio of 0.9.展开更多
A five leg inverter (FLI) control is incorporated to drive two independent rated permanent magnet synchronous motors (PMSMs) for automotive applications. Literature evidences many attempts of employing the FLI for con...A five leg inverter (FLI) control is incorporated to drive two independent rated permanent magnet synchronous motors (PMSMs) for automotive applications. Literature evidences many attempts of employing the FLI for controlling two general purpose/special motors, where variety of modulation techniques has been practiced for performance enhancement. Also in these cases one leg of inverter is common to both the motors. The expanded two arm modulation (ETAM) has been generally engaged in FLI. In ETAM the percentage voltage utilization factor (VUF) is calculated based on “α<sub>max</sub>”, where “α<sub>max</sub>” is the maximum modulation index and equal to and hence it restricts the VUF to 50%. This makes the FLI drives to use the dc link in inefficient way, which is due to the fact that conventional ETAM works with voltage reference. This paper modifies the ETAM in an ingenious way to improve the VUF further through current reference. In addition, the developed current reference expanded two arm modulation (CRETAM) minimizes the current harmonics and torque ripple as well. A detailed comparison of the CRETAM with the conventional ETAM and the competent digital counterpart, space vector pulse width modulation (SVPWM), is also presented. The enhancement in VUF, torque ripple minimization and current total harmonic distortion (THD) reduction are found in the MATLAB based simulation results.展开更多
The simultaneous γ-ray-radiation-induced grafting polymerization of acrylic acid on ex- panded polytetrafluoroethylene （ePTFE） film was investigated. It was found that the degree of grafting （DG） of poly（acrylic...The simultaneous γ-ray-radiation-induced grafting polymerization of acrylic acid on ex- panded polytetrafluoroethylene （ePTFE） film was investigated. It was found that the degree of grafting （DG） of poly（acrylic acid） （PAA） can be controlled by the monomer concentration, absorbed dose, and dose rate under an optimal inhibitor concentration of [Fe2＋]=18 mmol/L. SEM observation showed that the macroporous structure in ePTFE films would be covered gradually with the increase of the DG of PAA. The prepared ePTFE-g-PAA film was im- mersed in a neutral silver nitrate solution to fabricate an ePTFE-g-PAA/Ag hybrid film after the addition of NaBH4 as a reduction agent of Ag＋ to Ag atom. SEM, XRD, and XPS results proved that Ag nanoparticles with a size of several tens of nanometers to 100 nanometers were in situ immobilized on ePTFE film. The loading capacity of Ag nanoparticles could be tuned by the DG of PAA, and determined by thermal gravimetric analysis. The quart- titative antibacterial activity of the obtained ePTFE-g-PAA/Ag hybrid films was measured using counting plate method. It can kill all the Escherichia coli in the suspension in 1 h. Moreover, this excellent antibacterial activity can last at least for 4 h. This work provides a facile and practical way to make ePTFE meet the demanding antimicrobial requirement in more and more practical application areas.展开更多
Lightweight aggregates are increasingly used in concrete construction. They reduce concrete selfweight furnishing a structural advantage. In contrast, the mechanical properties and durability of lightweight concrete c...Lightweight aggregates are increasingly used in concrete construction. They reduce concrete selfweight furnishing a structural advantage. In contrast, the mechanical properties and durability of lightweight concrete can become the governing factor on lightweight aggregate replacement ratios. Alkali-Silica Reactison (ASR) and compressive strength of mortar samples with expanded slate, expanded glass or perlite, covering the spectrum of internal porosity and weight of lightweight aggregates, were evaluated. Scanning electron microscopy was utilized to evaluate the contribution of the aggregates’ porosity and chemical composition in inhibiting ASR. Perlite, owing to its highly porous microstructure and lower matter excelled in ASR expansion while chemical composition and denser microstructure of the heavier expanded slate resulted in more signified late ASR expansion and higher compressive strength. An attempt in visual inspection of ASR attack of alkali metal ions on silica-rich expanded glass using an ultra-accelerated exposure to sodium hydroxide solution was made</span></span><span style="font-family:Verdana;">.展开更多
Phase change material(PCM)can reduce the indoor temperature fluctuation and humidity control material can adjust relative humidity used in buildings.In this study,a kind of composite phase change material particles(CP...Phase change material(PCM)can reduce the indoor temperature fluctuation and humidity control material can adjust relative humidity used in buildings.In this study,a kind of composite phase change material particles(CPCMPs)were prepared by vacuum impregnation method with expanded perlite(EP)as supporting material and paraffin as phase change material.Thus,a PCM plate was fabricated by mould pressing method with CPCMPs and then composite phase change humidity control wallboard(CPCHCW)was prepared by spraying the diatom mud on the surface of PCM plate.The composition,thermophysical properties and microstructure were characterized using X-ray diffraction instrument(XRD),differential scanning calorimeter(DSC)and scanning electron microscope(SEM).Additionally,the hygrothermal performance of CPCHCW was characterized by temperature and humidity collaborative test.The results can be summarized as follows:(1)CPCMPs have suitable phase change parameters with melting/freezing point of 18.23°C/29.42°C and higher latent heat of 54.66 J/g/55.63 J/g;(2)the diatom mud can control the humidity of confined space with a certain volume;(3)the combination of diatom mud and PCM plate in CPCHCW can effectively adjust the indoor temperature and humidity.The above conclusions indicate the potential of CPCHCW in the application of building energy efficiency.展开更多
Deformation characteristics of light weight soil with different EPS (expanded polystyrene) sizes were investigated by consolidation tests.The results show that the confined stress-strain relation curve is in S shape,w...Deformation characteristics of light weight soil with different EPS (expanded polystyrene) sizes were investigated by consolidation tests.The results show that the confined stress-strain relation curve is in S shape,which has a good homologous relation with e-p curve and e-lgp curve,and three types of curves reflect obvious structural characteristics of light weight soil.When cement mixed ratio and EPS volume ratio are the same for different specimens,structural strength decreases with the increase of EPS size,but compressibility indexes basically keep unchanged within the structural strength.The settlement of light weight soil can be divided into instantaneous settlement and primary consolidation settlement.It has no obvious rheology property,and 90% of total consolidation deformation can be finished in 1 min.Settlement-time relation of light weight soil can be predicted by the hyperbolic model.S-lgt curve of light weight soil is not in anti-S shape.It is proved that there is no secondary consolidation section,so consolidation coefficient cannot be obtained by time logarithm method.Structural strength and unit price decrease with the increase of EPS size,but the reducing rate of the structural strength is lower than that of the unit price,so the cost of mixed soil can be reduced by increasing the EPS size.The EPS beads with 3-5 mm in diameter are suggested to be used in the construction process,and the prescription of mixed soil can be optimized.展开更多
Zero-valent iron（ZⅥ） was loaded on expanded graphite（EG） to produce a composite material（EG-ZⅥ） for efficient removal of hexavalent chromium（Cr（Ⅵ））. EG and EG-ZⅥ were characterized by X-ray diffraction（...Zero-valent iron（ZⅥ） was loaded on expanded graphite（EG） to produce a composite material（EG-ZⅥ） for efficient removal of hexavalent chromium（Cr（Ⅵ））. EG and EG-ZⅥ were characterized by X-ray diffraction（XRD）, scanning electron microscopy（SEM）,Fourier-transform infrared（FTIR） spectroscopy and Brunauer–Emmett–Teller（BET） analysis. EG-ZⅥ had a high specific surface area and contained sub-micron sized particles of zero-valent iron. Batch experiments were employed to evaluate the Cr（Ⅵ） removal performance. The results showed that the Cr（Ⅵ） removal rate was 98.80% for EG-ZⅥ,which was higher than that for both EG（10.00%） and ZⅥ（29.80%）. Furthermore, the removal rate of Cr（Ⅵ） by EG-ZⅥ showed little dependence on solution p H within a p H range of 1–9.Even at pH 11, a Cr（Ⅵ） removal rate of 62.44% was obtained after reaction for 1 hr. EG-ZⅥ could enhance the removal of Cr（Ⅵ） via chemical reduction and physical adsorption,respectively. X-ray photoelectron spectroscopy（XPS） was used to analyze the mechanisms of Cr（Ⅵ） removal, which indicated that the ZⅥ loaded on the surface was oxidized, and the removed Cr（Ⅵ） was immobilized via the formation of Cr（III） hydroxide and Cr（III）–Fe（III）hydroxide/oxyhydroxide on the surface of EG-ZⅥ.展开更多
The evaluation of the seismic stability of an expanded municipal solid waste(MSW) landfill is very important in seismic prone zones.In this paper,the pseudo-dynamic method was used to calculate the average safety fact...The evaluation of the seismic stability of an expanded municipal solid waste(MSW) landfill is very important in seismic prone zones.In this paper,the pseudo-dynamic method was used to calculate the average safety factor for the expanded landfill with a trapezoidal berm based on under-berm failure conditions.Furthermore,the effects of the variation of parameters such as the amplification factor,seismic coefficient,height of berm,angle of back slope of berm,and depth of waste mass at the back slope on the seismic stability of the landfill were studied.The results indicated that the influences of the vertical seismic coefficient,height of berm,and angle of the back slope of the berm on the seismic stability of the landfill are weakened as the amplification factor increases,but the influence of the horizontal seismic coefficient on the seismic stability of the landfill is strengthened.On the other hand,a certain ratio of the height of the waste mass above the back slope to the depth of waste mass at the back slope,or the reasonable consideration of the magnitude of the amplification factor will be conducive to the seismic design of the landfill.In addition,the results obtained by the pseudo-static and pseudo-dynamic methods were compared.展开更多
Terylene artificial silk printing and dyeing wastewater(TPD wastewater), containing averaged 710 mg/L terephthalic acid(TA) as the main carbon source and the character pollutant, was subjected to expanded granular slu...Terylene artificial silk printing and dyeing wastewater(TPD wastewater), containing averaged 710 mg/L terephthalic acid(TA) as the main carbon source and the character pollutant, was subjected to expanded granular sludge bed(EGSB) process. The stability of the EGSB process was firstly conducted by laboratory experiment. TA ionization was the predominated factor influencing the acid-base balance of the system. High concentration of TA in wastewater resulted in sufficient buffering capacity to neutralize the volatile fatty acids(VFA) generated from substrate degradation and provided strong base for anaerobic system to resist the pH decrease below 6.5. VFA and UFA caused almost no inhibition on the anaerobic process and biogas production except that pH was below 6.35 and VFA was at its maximum value. Along with the granulating of the activated sludge, the efficiency of organic removal and production rate of biogas increased gradually and became more stable. After start-up, the efficiency of COD removal increased to 57%—64%, pH stabilized in a range of 7.99—8.04, and production rate of biogas was relatively high and stable. Sludge granulating, suitable influent of pH and loading were responsible for the EGSB stability. The variation of VFA concentration only resulted in neglectable rebound of pH, and the inhibition from VFA could be ignored in EGSB. The EGSB reactor was stable for TPD wastewater treatment.展开更多
MXene is a rising star of two-dimensional(2D)materials for energy relative applications,however,the traditional synthesis of MXene etched by hazard HF acid or LiF+HCl mixed solution is highly dangerous with the risk o...MXene is a rising star of two-dimensional(2D)materials for energy relative applications,however,the traditional synthesis of MXene etched by hazard HF acid or LiF+HCl mixed solution is highly dangerous with the risk of splashing or pouring liquid solutions.In this work,we developed a water-free ionothermal synthesis of 2D Ti3C2 MXene via etching pristine Ti3AlC2 MAX in low-cost choline chloride and oxalic acid based deep eutectic solvents(DES)with the presence of NH4F,thus it was highly safe and convenient to operate solid precursor and product materials at room temperature.Benefited from the low vapor pressure and solvating properties of DES,the prepared Ti3C2(denoted as DES-Ti3C2)possessed a high purity up to 98% compared with 95% for HF etched Ti3C2(denoted as HF-Ti3C2).Notably,an expanded interlayer spacing of 1.35 nm could be achieved due to the intercalation of choline cations in DES-Ti3C2,larger than that of HF-Ti3C2(0.98 nm).As a result,the DES-Ti3C2 anodes exhibited enhanced lithium storage performance,such as high reversible capacity of 208 m Ah g-1at 0.5 A g-1,and long cycle life over 400 times,outperforming most reported pure MXene anodes.The ionothermal synthesis of MXene developed here may pave a new way to safely prepare other MXene for various energy relating applications.展开更多
A Ni Fe_2O_4/expanded graphite(Ni Fe_2O_4/EG)nanocomposite was prepared via a simple and inexpensive synthesis method. Its lithium storage properties were studied with the goal of applying it as an anode in a lithium-...A Ni Fe_2O_4/expanded graphite(Ni Fe_2O_4/EG)nanocomposite was prepared via a simple and inexpensive synthesis method. Its lithium storage properties were studied with the goal of applying it as an anode in a lithium-ion battery. The obtained nanocomposite exhibited a good cycle performance, with a capacity of 601 m Ah g^(-1)at a current of 1 A g^(-1)after 800 cycles. This good performance may beattributed to the enhanced electrical conductivity and layered structure of the EG. Its high mechanical strength could postpone the disintegration of the nanocomposite structure,efficiently accommodate volume changes in the Ni Fe_2O_4-based anodes, and alleviate aggregation of Ni Fe_2O_4 nanoparticles.展开更多
Expanded bed adsorption (EBA) has been widely used in industrial downstream bioprocessing. Solid matrix is the principal pillar supporting the successful application of EBA. A novel spherical cellulose-titanium dioxid...Expanded bed adsorption (EBA) has been widely used in industrial downstream bioprocessing. Solid matrix is the principal pillar supporting the successful application of EBA. A novel spherical cellulose-titanium dioxide composite matrix was prepared through the method of water-in-oil suspension thermal regeneration. Its typical physical properties were wet density 1.18g.cm-3, diameters in the range of 100-300um, porosity 85.5%, and water content 72.3%. Expansion characteristics and liquid mixing performance of the matrix in expanded bed were investigated using water and 10% (by mass) glycerol solution as mobile phases. The results indicate that the custom-assembled matrix has a stable flow hydrodynamics and exhibits the same degree of liquid-phase mixing or column efficiency as the commercially available Streamline adsorbent.展开更多
The modified graphite anode materials have some prominent advantages over other anode materials in the industrial applications.A novel simple and gentle method is proposed to synthesize the mild expanded graphite micr...The modified graphite anode materials have some prominent advantages over other anode materials in the industrial applications.A novel simple and gentle method is proposed to synthesize the mild expanded graphite microspheres(MEGMs) from flake graphite spheres through a combined modified pressurized oxidation combined with the microwave treatment.The microstructural results demonstrate that moderately expanded MEGMs with an expansion volume between 4 and 10 ml·g^(-1)exhibit a highly microporous structure with an enlarged interlayer spacing,a decreased microcrystalline size,as well as an increased number of functional groups on the surface,resulting in the increased storage sites and spaces for lithium ions and the enhanced diffusion rate of lithium ions.When used as the anode material for lithium-ion batteries,the MEGM-T75t30 obtained by oxidation treatment at 75℃ for 30 min followed by microwave irradiation for expansion displays a high reversible capacity of 446.7 mAh·g^(-1) at 100 mA·g^(-1) after 100 cycles and excellent rate performance(330 and 116 mAh·g^(-1) at 800 and 3200 mA·g^(-1),respectively).Therefore,the MEGMs prepared by this convenient and mild method show excellent electrochemical properties and good application potential.展开更多
文摘The process of disposing of expanded polystyrene (EPS) is by burning it in municipal incinerators. This process gives off EPS microplastics, which can find their way into water, food, blood, and major organ systems. Zophobas morio larvae are capable of consuming and breaking down EPS within their digestive tracts by minimizing the spread of microplastics. Studies of the consumption of EPS by Z. morio larvae are typically conducted under white or no visible light treatments. This study tested whether the color of visible light influenced the consumption rate of EPS by Z. morio larvae. If Z. morio larvae consume EPS under visible light, then visible light will influence the amount of EPS consumed. If results suggest that the consumption rate is influenced by visible light colors, then Z. morio larvae could be a solution for recycling EPS. This study’s procedure placed Z. morio larvae into 25 jars under one of six visible light treatments of red, yellow, green, blue, white, and no visible light. Each jar contained a pre-weighed block of EPS and six Z. morio larvae. After two weeks, the Z. morio larvae were removed from the jars, and the difference between each pre-weighed EPS block and the weight of the same partially consumed block was recorded in three trials. The data indicates that green and blue visible light treatments resulted in the greatest amount of EPS consumed by Z. morio larvae while the red and yellow had the least amount of EPS consumed by the Z. morio larvae. In conclusion, results indicate that green and blue visible light, compared to the no visible light treatment, could be used to influence the Z. morio larvae to consume more EPS. Green and blue visible light and Z. morio larvae could make the recycling process of EPS more environmentally friendly when used in households or by local environmental organizations.
文摘The United States Food and Drug Administration's(FDA's)August 2024 determination that an additional phase Ⅱ study will be required to consider the approval of midomafetamine for the treatment of posttraumatic stress disorder(PTSD)could delay the potential approval of this promising treatment by several years.
基金supported by National Key R&D Program of China(2024YFF0510200)National Natural Science Foundation of China(52478438,52174237)+2 种基金Excellent Early Career Scientists form Germany(GZ1717)Science and Technology Project of Changsha-Outstanding Innovative Youth(kq2406007)Practice Innovation and Entrepreneurship Enhancement Program for Postgraduate of Changsha University of Science&Technology(CLSJCX24006).
文摘Severe segregation and poor rheological properties in crumb rubber(CR)modified asphalt(CRMT)were addressed by investigating the performance improvement effect of organic expanded vermiculite(OEV)as a comodifier,while the modification mechanism of the resulting asphalt was also elucidated.Vermiculite was thermally treated and chemically modified to enhance its interaction with the asphalt matrix and CR,improving dispersion and interfacial properties.CR/OEV/furfural extract oil(OIL)composite modified asphalt(COMT)was prepared in this study.The compatibility and microscopic mechanism of modified asphalt were characterized by dynamic shear rheological test,multiple stress creep recovery(MSCR)test,BBR test,thermal segregation test,fluorescent scanning test,infrared spectroscopy,and gel permeation chromatography.Rheological tests showed that the modified asphalt exhibited improved high-temperature stability,with increased G*/sin(δ)values,and better low-temperature flexibility.Storage stability tests showed a reduced softening point difference,indicating enhanced homogeneity and reduced segregation.Microscopic analysis revealed that OEV effectively optimized the microstructure of the composite system by promoting the uniform dispersion of CR within the asphalt matrix.Furthermore,the macromolecular weight of COMT was increased by 31.9%,molecular weight analysis confirmed a higher proportion of large molecular weight fractions,contributing to enhanced rheological properties and compatibility.These findings demonstrated that OEV significantly improved the performance and durability of CRMT,providing a promising approach for sustainable road construction.
基金supported by the National Natural Science Foundation of China(Grant Nos.52208333 and 52378328)China Communications Construction Company Ltd.(Grant No.2023-ZJKJ-01).
文摘In order to effectively improve the horizontal bearing capacity of pile foundations,this study proposes post-expanded arm grouting technology and associated pile foundations.The horizontal bearing characteristic of the post-expanded arm grouting pile was explored through model tests.The test results indicate that the post-expanded arm grouting pile can increase the contact area between the pile and soil,and can improve the strength of the soil.The horizontal bearing capacity of the post-expanded arm grouting pile was approximately 3 times that of the conventional pile.It also shows that the larger the plate diameter ratio or grouting volume,the higher the horizontal bearing capacity of the post-expanded arm grouting pile.The maximum bending moment of the post-expanded arm grouting pile was located at the pile plate,and the displacement zero point of the new pile was higher than that of the conventional pile.The soil resistance at the pile plate was significantly higher than that of conventional piles,indicating that the pile plate effectively enhances the soil resistance.The improved p-y curve model and horizontal bearing capacity calculation method for the post-expanded arm grouting pile were proposed by considering the pile plate diameter factor.This method was finally verified by experimental results.The results of this study can provide a reference for calculating the horizontal bearing capacity of the post-expanded arm grouting pile.
文摘An estimated 3%-4%of people are living with the hepatitis B virus(HBV),and without treatment,the risk of developing cirrhosis and hepatocellular cancer(HCC)is an omnipresent threat.Prevention of HCC is a major challenge,as the association between viral suppression and HCC risk reduction is multifactorial,involving the progressive depletion of hepatocytes through covalently closed circular DNA integration,as well as the prevention of liver fibrosis and cirrhosis.Despite effective and cheap antiviral treatment capable of suppressing HBV replication and thereby cirrhosis and HCC,the current indications for therapy need revision and more research to expand the gamut and treat more infected people.In this review,we discuss the possible expansion of antiviral treatment in chronic hepatitis B to prevent cirrhosis and,importantly,HCC.
基金supported by the National Key Research and Development Program of China(No.2022YFB2502000)the National Natural Science Foundation of China(Nos.U21A20332,51771076,U21A200970,52301266)the Science and Technology Planning Project of Guangzhou(No.2024A04J3332)。
文摘Mixed polyanion phosphate Na_(4)Fe_(3)(PO_(4))_(2)P_(2)O_(7)(NFPP)is regarded as the most promising cathode material for sodium-ion batteries(SIBs),due to its high structural stability and low-cost environmental friendliness.However,its intrinsic low conductivity and sluggish Na^(+)diffusion restricted the fast-charge and low-temperature sodium storage.Herein,an NFPP composite encapsulated by in-situ pyrolytic carbon and coupled with expanded graphite(NFPP@C/EG)was constructed via a sol-gel method followed by a ballmill procedure.Due to the dual-carbon modified strategy,this NFPP@C/EG only enhanced the electronic conductivity,but also endowed more channels for Na^(+)diffusion.As cathode for SIBs,the optimized NFPP(M-NFPP@C/EG)delivers excellent rate capability(capacity of~80.5 mAh/g at 50 C)and outstanding cycling stability(11000 cycles at 50 C with capacity retention of 89.85%).Additionally,cyclic voltammetry(CV)confirmed that its sodium storage behavior is pseudocapacitance-controlled,with in-situ electrochemical impedance spectroscopy(EIS)further elucidating improvements in electrode reaction kinetics.At lower temperatures(0℃),M-NFPP@C/EG demonstrated exceptional cycling performance(8800 cycles at 10 C with capacity retention of 95.81%).Moreover,pouch cells also exhibited excellent stability.This research demonstrates the feasibility of a dual carbon modification strategy in enhancing NFPP and proposes a low-cost,high-rate,and ultra-stable cathode material for SIBs.
基金Project(51408184)supported by the National Natural Science Foundation of ChinaProject(E2017202136)supported by the Natural Science Foundation of Hebei Province,China+1 种基金Project(BSBE2017-05)supported by Opening Funds of State Key Laboratory of Building Safety and Built Environment and National Engineering Research Center of Building Technology,ChinaProject(QG2018-3)supported by Hebei Provincial Department of Transportation,China
文摘A binary eutectic mixture composed of tetradecanol(TD)and myristic acid(MA)was maximally absorbed into the microstructures of expanded perlite(EP)and expanded vermiculite(EVMT),respectively,through a self-made vacuum adsorption roller to prepare phase change material(PCM)particle(PCP).Then EP and EVMT-based composite PCM plates were respectively fabricated through a mold pressing method.The thermal property,chemical stability,microstructure and durability were characterized by differential scanning calorimeter(DSC),Fourier transform infrared spectroscope(FT-IR),scanning electron microscope(SEM)and thermal cycling tests,respectively.The results show that both PCPs have high latent heats with 110 J/g for EP-based PCP and more than 130 J/g for EVMT-based PCP,compact microstructure without PCM leakage,stable chemical property and good durability.The research results have proved the feasibility for the vacuum adsorption roller used in the composite PCM fabrication.Results of thermal storage performance experiment indicate that the fabricated PCM plates have better thermal inertia than common building materials,and the thermal storage performance of PCM plates has nonlinearly changed with outside air velocity and temperature increase.Therefore,PCM plates show a significant potential for the practical application of building thermal storage.
基金Funded by the Science Foundation of Jiangsu Province (No. BK2009534)Foundation of Oil Gas Storage and Transport of Jiangsu Province (No.CY0901)
文摘A new method for preparing expanded graphite-based composites （EGCs） was developed.The obtained samples were characterized by scanning electron microscopy （SEM）,transmission electron microscope （TEM） and nitrogen adsorption.The experimental results indicated that the EGCs was not simply mechanical mixture of EG and activated carbon,instead the activated carbon was coated on the surface of interior and external pores of the EG in the form of thin carbon layer.The thickness of the activated carbon layer was nearly one hundred nanometers by calculation.It was shown that the higher the impregnation ratio and the activation temperature were,the easier the porosity development would be.And the BET surface area and the total pore volume were as high as 1978 m2/g and 0.9917 cm3/g respectively at 350℃ with an impregnation ratio of 0.9.
文摘A five leg inverter (FLI) control is incorporated to drive two independent rated permanent magnet synchronous motors (PMSMs) for automotive applications. Literature evidences many attempts of employing the FLI for controlling two general purpose/special motors, where variety of modulation techniques has been practiced for performance enhancement. Also in these cases one leg of inverter is common to both the motors. The expanded two arm modulation (ETAM) has been generally engaged in FLI. In ETAM the percentage voltage utilization factor (VUF) is calculated based on “α<sub>max</sub>”, where “α<sub>max</sub>” is the maximum modulation index and equal to and hence it restricts the VUF to 50%. This makes the FLI drives to use the dc link in inefficient way, which is due to the fact that conventional ETAM works with voltage reference. This paper modifies the ETAM in an ingenious way to improve the VUF further through current reference. In addition, the developed current reference expanded two arm modulation (CRETAM) minimizes the current harmonics and torque ripple as well. A detailed comparison of the CRETAM with the conventional ETAM and the competent digital counterpart, space vector pulse width modulation (SVPWM), is also presented. The enhancement in VUF, torque ripple minimization and current total harmonic distortion (THD) reduction are found in the MATLAB based simulation results.
文摘The simultaneous γ-ray-radiation-induced grafting polymerization of acrylic acid on ex- panded polytetrafluoroethylene （ePTFE） film was investigated. It was found that the degree of grafting （DG） of poly（acrylic acid） （PAA） can be controlled by the monomer concentration, absorbed dose, and dose rate under an optimal inhibitor concentration of [Fe2＋]=18 mmol/L. SEM observation showed that the macroporous structure in ePTFE films would be covered gradually with the increase of the DG of PAA. The prepared ePTFE-g-PAA film was im- mersed in a neutral silver nitrate solution to fabricate an ePTFE-g-PAA/Ag hybrid film after the addition of NaBH4 as a reduction agent of Ag＋ to Ag atom. SEM, XRD, and XPS results proved that Ag nanoparticles with a size of several tens of nanometers to 100 nanometers were in situ immobilized on ePTFE film. The loading capacity of Ag nanoparticles could be tuned by the DG of PAA, and determined by thermal gravimetric analysis. The quart- titative antibacterial activity of the obtained ePTFE-g-PAA/Ag hybrid films was measured using counting plate method. It can kill all the Escherichia coli in the suspension in 1 h. Moreover, this excellent antibacterial activity can last at least for 4 h. This work provides a facile and practical way to make ePTFE meet the demanding antimicrobial requirement in more and more practical application areas.
文摘Lightweight aggregates are increasingly used in concrete construction. They reduce concrete selfweight furnishing a structural advantage. In contrast, the mechanical properties and durability of lightweight concrete can become the governing factor on lightweight aggregate replacement ratios. Alkali-Silica Reactison (ASR) and compressive strength of mortar samples with expanded slate, expanded glass or perlite, covering the spectrum of internal porosity and weight of lightweight aggregates, were evaluated. Scanning electron microscopy was utilized to evaluate the contribution of the aggregates’ porosity and chemical composition in inhibiting ASR. Perlite, owing to its highly porous microstructure and lower matter excelled in ASR expansion while chemical composition and denser microstructure of the heavier expanded slate resulted in more signified late ASR expansion and higher compressive strength. An attempt in visual inspection of ASR attack of alkali metal ions on silica-rich expanded glass using an ultra-accelerated exposure to sodium hydroxide solution was made</span></span><span style="font-family:Verdana;">.
基金Project(51408184)supported by the National Natural Science Foundation of ChinaProject(E2017202136)supported by the Natural Science Foundation of Hebei Province,China+1 种基金Project(BSBE2017-05)supported by the Opening Funds of State Key Laboratory of Building Safety and Built Environment and National Engineering Research Center of Building Technology,ChinaProject(QG2018-3)supported by Hebei Provincial Department of Transportation,China
文摘Phase change material(PCM)can reduce the indoor temperature fluctuation and humidity control material can adjust relative humidity used in buildings.In this study,a kind of composite phase change material particles(CPCMPs)were prepared by vacuum impregnation method with expanded perlite(EP)as supporting material and paraffin as phase change material.Thus,a PCM plate was fabricated by mould pressing method with CPCMPs and then composite phase change humidity control wallboard(CPCHCW)was prepared by spraying the diatom mud on the surface of PCM plate.The composition,thermophysical properties and microstructure were characterized using X-ray diffraction instrument(XRD),differential scanning calorimeter(DSC)and scanning electron microscope(SEM).Additionally,the hygrothermal performance of CPCHCW was characterized by temperature and humidity collaborative test.The results can be summarized as follows:(1)CPCMPs have suitable phase change parameters with melting/freezing point of 18.23°C/29.42°C and higher latent heat of 54.66 J/g/55.63 J/g;(2)the diatom mud can control the humidity of confined space with a certain volume;(3)the combination of diatom mud and PCM plate in CPCHCW can effectively adjust the indoor temperature and humidity.The above conclusions indicate the potential of CPCHCW in the application of building energy efficiency.
基金Project(2012JQ7013)supported by the Natural Science Foundation of Shaanxi Province,ChinaProject(QN2012025)supported by the Fundamental Research Funds for the Central Universities of ChinaProject(2011BSJJ084)supported by Research Foundation of Northwest A&F University,China
文摘Deformation characteristics of light weight soil with different EPS (expanded polystyrene) sizes were investigated by consolidation tests.The results show that the confined stress-strain relation curve is in S shape,which has a good homologous relation with e-p curve and e-lgp curve,and three types of curves reflect obvious structural characteristics of light weight soil.When cement mixed ratio and EPS volume ratio are the same for different specimens,structural strength decreases with the increase of EPS size,but compressibility indexes basically keep unchanged within the structural strength.The settlement of light weight soil can be divided into instantaneous settlement and primary consolidation settlement.It has no obvious rheology property,and 90% of total consolidation deformation can be finished in 1 min.Settlement-time relation of light weight soil can be predicted by the hyperbolic model.S-lgt curve of light weight soil is not in anti-S shape.It is proved that there is no secondary consolidation section,so consolidation coefficient cannot be obtained by time logarithm method.Structural strength and unit price decrease with the increase of EPS size,but the reducing rate of the structural strength is lower than that of the unit price,so the cost of mixed soil can be reduced by increasing the EPS size.The EPS beads with 3-5 mm in diameter are suggested to be used in the construction process,and the prescription of mixed soil can be optimized.
基金supported by the National Key Research and Development Program of China(No.2017YFD0801503)the Fundamental Research Funds for the Central Universities(No.PYVZ1703)the Higher Education and High-quality and World-class Universities(PY201606)
文摘Zero-valent iron（ZⅥ） was loaded on expanded graphite（EG） to produce a composite material（EG-ZⅥ） for efficient removal of hexavalent chromium（Cr（Ⅵ））. EG and EG-ZⅥ were characterized by X-ray diffraction（XRD）, scanning electron microscopy（SEM）,Fourier-transform infrared（FTIR） spectroscopy and Brunauer–Emmett–Teller（BET） analysis. EG-ZⅥ had a high specific surface area and contained sub-micron sized particles of zero-valent iron. Batch experiments were employed to evaluate the Cr（Ⅵ） removal performance. The results showed that the Cr（Ⅵ） removal rate was 98.80% for EG-ZⅥ,which was higher than that for both EG（10.00%） and ZⅥ（29.80%）. Furthermore, the removal rate of Cr（Ⅵ） by EG-ZⅥ showed little dependence on solution p H within a p H range of 1–9.Even at pH 11, a Cr（Ⅵ） removal rate of 62.44% was obtained after reaction for 1 hr. EG-ZⅥ could enhance the removal of Cr（Ⅵ） via chemical reduction and physical adsorption,respectively. X-ray photoelectron spectroscopy（XPS） was used to analyze the mechanisms of Cr（Ⅵ） removal, which indicated that the ZⅥ loaded on the surface was oxidized, and the removed Cr（Ⅵ） was immobilized via the formation of Cr（III） hydroxide and Cr（III）–Fe（III）hydroxide/oxyhydroxide on the surface of EG-ZⅥ.
文摘The evaluation of the seismic stability of an expanded municipal solid waste(MSW) landfill is very important in seismic prone zones.In this paper,the pseudo-dynamic method was used to calculate the average safety factor for the expanded landfill with a trapezoidal berm based on under-berm failure conditions.Furthermore,the effects of the variation of parameters such as the amplification factor,seismic coefficient,height of berm,angle of back slope of berm,and depth of waste mass at the back slope on the seismic stability of the landfill were studied.The results indicated that the influences of the vertical seismic coefficient,height of berm,and angle of the back slope of the berm on the seismic stability of the landfill are weakened as the amplification factor increases,but the influence of the horizontal seismic coefficient on the seismic stability of the landfill is strengthened.On the other hand,a certain ratio of the height of the waste mass above the back slope to the depth of waste mass at the back slope,or the reasonable consideration of the magnitude of the amplification factor will be conducive to the seismic design of the landfill.In addition,the results obtained by the pseudo-static and pseudo-dynamic methods were compared.
文摘Terylene artificial silk printing and dyeing wastewater(TPD wastewater), containing averaged 710 mg/L terephthalic acid(TA) as the main carbon source and the character pollutant, was subjected to expanded granular sludge bed(EGSB) process. The stability of the EGSB process was firstly conducted by laboratory experiment. TA ionization was the predominated factor influencing the acid-base balance of the system. High concentration of TA in wastewater resulted in sufficient buffering capacity to neutralize the volatile fatty acids(VFA) generated from substrate degradation and provided strong base for anaerobic system to resist the pH decrease below 6.5. VFA and UFA caused almost no inhibition on the anaerobic process and biogas production except that pH was below 6.35 and VFA was at its maximum value. Along with the granulating of the activated sludge, the efficiency of organic removal and production rate of biogas increased gradually and became more stable. After start-up, the efficiency of COD removal increased to 57%—64%, pH stabilized in a range of 7.99—8.04, and production rate of biogas was relatively high and stable. Sludge granulating, suitable influent of pH and loading were responsible for the EGSB stability. The variation of VFA concentration only resulted in neglectable rebound of pH, and the inhibition from VFA could be ignored in EGSB. The EGSB reactor was stable for TPD wastewater treatment.
基金financially supported by the National Natural Science Foundation of China (Nos.21601029, 21601030)the Open Project Program of the State Key Laboratory of Inorganic Synthesis and Preparative Chemistry (Nos.2017-33, 2017-26)the Fundamental Research Funds for the Central Universities of China (No.N180503012)。
文摘MXene is a rising star of two-dimensional(2D)materials for energy relative applications,however,the traditional synthesis of MXene etched by hazard HF acid or LiF+HCl mixed solution is highly dangerous with the risk of splashing or pouring liquid solutions.In this work,we developed a water-free ionothermal synthesis of 2D Ti3C2 MXene via etching pristine Ti3AlC2 MAX in low-cost choline chloride and oxalic acid based deep eutectic solvents(DES)with the presence of NH4F,thus it was highly safe and convenient to operate solid precursor and product materials at room temperature.Benefited from the low vapor pressure and solvating properties of DES,the prepared Ti3C2(denoted as DES-Ti3C2)possessed a high purity up to 98% compared with 95% for HF etched Ti3C2(denoted as HF-Ti3C2).Notably,an expanded interlayer spacing of 1.35 nm could be achieved due to the intercalation of choline cations in DES-Ti3C2,larger than that of HF-Ti3C2(0.98 nm).As a result,the DES-Ti3C2 anodes exhibited enhanced lithium storage performance,such as high reversible capacity of 208 m Ah g-1at 0.5 A g-1,and long cycle life over 400 times,outperforming most reported pure MXene anodes.The ionothermal synthesis of MXene developed here may pave a new way to safely prepare other MXene for various energy relating applications.
基金support from the National Basic Research Program of China (2014CB239702)National Natural Science Foundation of China (Grant Nos. 21371121, 21506126 and 51502174)+1 种基金Shenzhen Science and Technology Research Foundation (Grant Nos. JCYJ20150324141711645,JCYJ20150324141711616 and JCYJ20150626090504916)China Postdoctoral Science Foundation (2015 M582401 and 2015 M572349)
文摘A Ni Fe_2O_4/expanded graphite(Ni Fe_2O_4/EG)nanocomposite was prepared via a simple and inexpensive synthesis method. Its lithium storage properties were studied with the goal of applying it as an anode in a lithium-ion battery. The obtained nanocomposite exhibited a good cycle performance, with a capacity of 601 m Ah g^(-1)at a current of 1 A g^(-1)after 800 cycles. This good performance may beattributed to the enhanced electrical conductivity and layered structure of the EG. Its high mechanical strength could postpone the disintegration of the nanocomposite structure,efficiently accommodate volume changes in the Ni Fe_2O_4-based anodes, and alleviate aggregation of Ni Fe_2O_4 nanoparticles.
基金Supported by the National Natural Science Foundation of China(No.20076042,No.20206029)and the Scientific Research Foundation of the State Education Ministry for the Returned Overseas Chinese Scholars(No.2002-247).
文摘Expanded bed adsorption (EBA) has been widely used in industrial downstream bioprocessing. Solid matrix is the principal pillar supporting the successful application of EBA. A novel spherical cellulose-titanium dioxide composite matrix was prepared through the method of water-in-oil suspension thermal regeneration. Its typical physical properties were wet density 1.18g.cm-3, diameters in the range of 100-300um, porosity 85.5%, and water content 72.3%. Expansion characteristics and liquid mixing performance of the matrix in expanded bed were investigated using water and 10% (by mass) glycerol solution as mobile phases. The results indicate that the custom-assembled matrix has a stable flow hydrodynamics and exhibits the same degree of liquid-phase mixing or column efficiency as the commercially available Streamline adsorbent.
基金financially supported by the National Natural Science Foundation of China(Nos.51702191,51802325 and U1510134)the Natural Science Foundation of Shanxi Province,China(No.201901D111037)+3 种基金Scientific Research Foundation for Young Scientists of Shanxi Province,China(No.201901D211585)the Science and Technology Innovation Planning Project in Universities and Colleges of Shanxi Province of China(No.2019L0012)the Unveiling Bidding Projects of Shanxi Province,China(No.20191101008)the Shanxi“1331 Project”Key Innovative Research Team。
文摘The modified graphite anode materials have some prominent advantages over other anode materials in the industrial applications.A novel simple and gentle method is proposed to synthesize the mild expanded graphite microspheres(MEGMs) from flake graphite spheres through a combined modified pressurized oxidation combined with the microwave treatment.The microstructural results demonstrate that moderately expanded MEGMs with an expansion volume between 4 and 10 ml·g^(-1)exhibit a highly microporous structure with an enlarged interlayer spacing,a decreased microcrystalline size,as well as an increased number of functional groups on the surface,resulting in the increased storage sites and spaces for lithium ions and the enhanced diffusion rate of lithium ions.When used as the anode material for lithium-ion batteries,the MEGM-T75t30 obtained by oxidation treatment at 75℃ for 30 min followed by microwave irradiation for expansion displays a high reversible capacity of 446.7 mAh·g^(-1) at 100 mA·g^(-1) after 100 cycles and excellent rate performance(330 and 116 mAh·g^(-1) at 800 and 3200 mA·g^(-1),respectively).Therefore,the MEGMs prepared by this convenient and mild method show excellent electrochemical properties and good application potential.
