Based on Pomeron exchange model, elastic production of vector meson in electro-proton interaction is investigated with both linear and non-linear Pomeron trajectory. A numerical calculation for J/psi production is per...Based on Pomeron exchange model, elastic production of vector meson in electro-proton interaction is investigated with both linear and non-linear Pomeron trajectory. A numerical calculation for J/psi production is performed. The effect of the energy scale so and photon virtuality Q(2) on differential cross section are also predicted. A good agreement with experimental data is obtained. Our conclusions are that the Pomeron exchange model is a successful description of J/psi electro-production, the dependence of the differential cross sections on Q2 is negligible, the linear trajectory is a good approximation to non-linearity of the Pomeron trajectory, and the value of the energy scale parameter so is dependent on the momentum transfer, namely its effect is moderate at low momentum transfer but it causes no difference at high momentum transfer vertical bar t vertical bar >= 1.25 GeV2.展开更多
Based on Pomeron exchange model, J/ψ and φ production in electro-proton interaction are investigated with both linear and non-linear Pomeron trajectory. The experimental differential cross sections measured as a fun...Based on Pomeron exchange model, J/ψ and φ production in electro-proton interaction are investigated with both linear and non-linear Pomeron trajectory. The experimental differential cross sections measured as a function of the kinematic variable Q^2,W and t are reproduced successfully in the model. Our conclusions are that the Pomeron exchange model is a successful description of J/ψ and φ electro-productions on the proton, and that the linear trajectory is a good approximation to non-linearity of the Pomeron trajectory.展开更多
Based on the Pomeron exchange model, elastic production of φ meson in electron-proton interaction is investigated with both linear and non-linear Pomeron trajectories. The numerical calculations of the differential c...Based on the Pomeron exchange model, elastic production of φ meson in electron-proton interaction is investigated with both linear and non-linear Pomeron trajectories. The numerical calculations of the differential cross section for e + p → e' + p+ φ are performed. The theoretical predictions show that the dependence of the differentialcross section on virtual photon virtuality, Q2, is of moderation, the change of the energy scale parameter so causes moderate effect on the differential cross section, and the linear trajectory is a good approximation to non-linearity of the Pomeron trajectory, in particular, at small momentum transfer region | t |≤ 0.2 GeV2.展开更多
In this talk, I present the results on the pole structure of pion-nucleon scattering in an analytic model based on meson exchange. The analytic properties of scattering amplitudes provide important information. Beside...In this talk, I present the results on the pole structure of pion-nucleon scattering in an analytic model based on meson exchange. The analytic properties of scattering amplitudes provide important information. Besides the cuts, the poles and zeros on the different Riemann sheets determine the global behavior of the amplitude on the physical axis. Pole positions and residues allow for a parameterization of resonances in a well-defined way, free of assumptions for the background and energy dependence of the resonance part. This is a necessary condition to relate resonance contributions in different reactions.展开更多
In order to investigate the high-temperature evaporation characteristics of multicomponent liquid fuel,three kinds of blended fuel:n-heptane/n-decane/RP-3 aviation kerosene-ethanol were experimentally studied with and...In order to investigate the high-temperature evaporation characteristics of multicomponent liquid fuel,three kinds of blended fuel:n-heptane/n-decane/RP-3 aviation kerosene-ethanol were experimentally studied with and without forced convection.Further,based on zerodiffusion and infinite diffusion concept,this study expanded Thick Exchange Layer evaporation model with Natural Convection effect(NC-TEL)to multicomponent liquid fuels.The experimental results show that the droplet evaporation rate increases significantly with the increase of ambient temperature.Higher temperature leads to more significant relationships between the composition ratio and the evaporation rate.The effect of forced convection is not obviously under the circumstance in this paper.Then,the evaporation models were validated by experimental data.In general,the new NC-TEL model behaves better than the Ranz-Marshall(R-M)model,and the prediction accuracy at high temperature is improved by 8%to 35%.In lower temperature conditions,the prediction of zero-diffusion NC-TEL model is better than the infinite diffusion NC-TEL model.In high-temperature conditions,for n-heptane-ethanol droplet,the predictions of NC-TEL model are accurate,but for n-decane/RP-3 aviation kerosene-ethanol,the predictions are lower than experimental results.This may be caused by the micro-explosion phenomenon and the Marangoni phenomenon.展开更多
Due to the deterioration of serious energy dilemma,energy-conservation and emission–reduction have been the strategic target in the past decades,thus people have identified the vital importance of higher energy effic...Due to the deterioration of serious energy dilemma,energy-conservation and emission–reduction have been the strategic target in the past decades,thus people have identified the vital importance of higher energy efficiency and the influence of lower carbon development.Since work exchange network is a significant part of energy recovery system,its optima design will have dramatically significant effect on energy consumption reduction in chemical process system.With an extension of the developed transshipment model in isothermal process,a novel step-wise methodology for synthesis of direct work exchange network(WEN)in adiabatic process involving heat integration is first proposed in this paper,where a nonlinear programming(NLP)model is formulated by regarding the minimum utility consumption as objective function and optimizing the initial WEN in accordance with the presented matching rules to get the optimized WEN configuration at first.Furthermore,we focus on the work exchange network synthesis with heat integration to attain the minimal total annual cost(TAC)with the introduction of heat-exchange equipment that is achieved by the following strategies in sequence:introducing heat-exchange equipment directly,adjusting the work quantity of the adjacent utility compressors or expanders,and approximating upper/lower pressure limits consequently to obtain considerable cost savings of expanders or compressors and work utility.Finally,a case taken from the literature is studied to illustrate the feasibility and effectiveness of the proposed method.展开更多
Perfluorooctane sulfonate（PFOS） has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the ad...Perfluorooctane sulfonate（PFOS） has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force（LDF） approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.展开更多
A model-exchange method based on feature between isomerous CAD systems is put forward in this paper.In this method,CAD model information is accessed at both feature and geometry levels and converted according to stand...A model-exchange method based on feature between isomerous CAD systems is put forward in this paper.In this method,CAD model information is accessed at both feature and geometry levels and converted according to standard feature opera- tion.The feature information including feature tree,dimensions and constraints,which will be lost in traditional data conver- sion,as well as geometry are converted completely from source CAD system to destination one.So the transferred model can be edit- ed through feature operation,which cannot be implemented by general model-exchange interface.展开更多
Using a monetary model of exchange rate determination that suggests a strong link between the nominal exchange rate and a set of monetary fundamentals, exchange rate dynamics for the Czech Republic, Hungary, and Polan...Using a monetary model of exchange rate determination that suggests a strong link between the nominal exchange rate and a set of monetary fundamentals, exchange rate dynamics for the Czech Republic, Hungary, and Poland is studied. As the cointegration relationship among exchange rate, output, and the monetary fundamentals （money supply and interest rate） is found, vector autoregressions （VAR）/vector error-correction （VEC） and two-stage least squares （2SLS） error-correction models are used in this context, since both approaches allow estimating short-run correlations between exchange rates and fundamentals while taking into account the existent long-run exchange rate constraints. Based on the quarterly data for the period of 1998-2012, it is found that for all countries, an increase in the money supply, domestic output slowdown, or stronger growth abroad are factors behind a nominal exchange rate depreciation, just as predicted by the monetary model of exchange rate. However, the effects of domestic-foreign interest rate differential are quite heterogeneous, being in line with theoretical predictions of a standard monetary model for Poland only. According to the decomposition of variance, money supply and interest rates account for 30%-46% of the exchange rate variation in the Czech Republic, from 10% to 14% in Hungary, and from 23% to 42% in Poland.展开更多
The semi-quantum two-orbital exchange model is used to investigate the effect of small rare-earth ion substitution on orthorhombic RMnO 3 with A-type antiferromagnetic order,using the Monte Carlo algorithm,exact diago...The semi-quantum two-orbital exchange model is used to investigate the effect of small rare-earth ion substitution on orthorhombic RMnO 3 with A-type antiferromagnetic order,using the Monte Carlo algorithm,exact diagonalization,and zero-temperature optimization approaches.It is revealed that the substitution results in a rich multiferroic phase diagram where the coexisting A-type antiferromagnetic phase and spiral spin phase,pure spiral spin phase,coexisting spiral spin phase,the E-type antiferromagnetic phase,and the pure E-type antiferromagnetic phase emerge in sequence.The multiferroic phase transitions modulate substantially the electric polarization,which is consistent qualitatively with recent experiments.展开更多
The homogeneous plastic flow in bulk metallic glasses （BMGs） must be elucidated by an appropriate atomistic mechanism. It is proposed that a so-called concordant shifting model, based on rearrangements of five-atom ...The homogeneous plastic flow in bulk metallic glasses （BMGs） must be elucidated by an appropriate atomistic mechanism. It is proposed that a so-called concordant shifting model, based on rearrangements of five-atom subclusters, can describe the plastic strain behaviour of BMGs in a temperature range from room temperature to the supercooled liquid region. To confirm the effectiveness of the atomic concordant shifting model, a comparative investigation between the vacancy/atom model and the concordant shifting model is carried out based on the estimation of the strain rate deduced from two models. Our findings suggest that the atomic concordant shifting model rather than the vacancy/atom exchange model can well predict the large strain rate in the superplasticity of BMGs.展开更多
This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins（SCER）. The effects of the mass ratio of methanol to acidified ...This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins（SCER）. The effects of the mass ratio of methanol to acidified oil,reaction temperature,and catalyst loading were studied to optimize the conditions for maximum conversion of free fatty acids（FFAs）. The results showed that the optimal conversion rate of FFAs was 91.87% at the mass ratio of methanol to acidified oil of 2.5：1.0,reaction temperature of 65.0 °C,catalyst loading of 5.0 g and reaction time of 8.0 h. The external and internal mass transfer resistances were negligible based on the experimental results and a pseudo-homogeneous kinetic model was proposed for the esterification. The activation energy and thermodynamic parameters including G,S and H were determined. The conversion rates of FFAs obtained from the established model were in good agreement with the experimental data.展开更多
Fixture design and planning is one of the most important manufacturing activities, playing a pivotal role in deciding the lead time for product development. Fixture design, which affects the part-quality in terms of g...Fixture design and planning is one of the most important manufacturing activities, playing a pivotal role in deciding the lead time for product development. Fixture design, which affects the part-quality in terms of geometric accuracy and surface finish, can be enhanced by using the product manufacturing information(PMI) stored in the neutral standard for the exchange of product model data(STEP) file, thereby integrating design and manufacturing. The present paper proposes a unique fixture design approach, to extract the geometry information from STEP application protocol(AP) 242 files of computer aided design(CAD) models, for providing automatic suggestions of locator positions and clamping surfaces. Automatic feature extraction software "FiXplan", developed using the programming language C#, is used to extract the part feature, dimension and geometry information. The information from the STEP AP 242 file is deduced using geometric reasoning techniques, which in turn is utilized for fixture planning. The developed software is observed to be adept in identifying the primary, secondary, and tertiary locating faces and locator position configurations of prismatic components. Structural analysis of the prismatic part under different locator positions was performed using commercial finite element method software, ABAQUS, and the optimized locator position was identified on the basis of minimum deformation of the workpiece.The area-ratio(base locator enclosed area(%)/work piece base area(%)) for the ideal locator configuration was observed as 33%. Experiments were conducted on a prismatic workpiece using a specially designed fixture, for different locator configurations. The surface roughness and waviness of the machined surfaces were analysed using an Alicona non-contact optical profilometer. The best surface characteristics were obtained for the surface machined under the ideal locator positions having an area-ratio of 33%, thus validating the predicted numerical results. The efficiency, capability and applicability of the developed software is demonstrated for the finishing operation of a sensor cover – a typical prismatic component having applications in the naval industry, under different locator configurations.The best results were obtained under the proposed ideal locator configuration of area-ratio 33%.展开更多
The lattice Boltzmann model with coupled chemical reaction was proposed to simulate the ion exchange process of rare earth leaching and verified by comparison with both empirical correlation of mass transfer coefficie...The lattice Boltzmann model with coupled chemical reaction was proposed to simulate the ion exchange process of rare earth leaching and verified by comparison with both empirical correlation of mass transfer coefficient and unreacted-core shrinking model. By simulation, the zonation phenomenon of leaching reagent in the leaching column was presented, and the breakthrough curve of leaching reagent was obtained. When t=50 s, there existed the saturated and exchange zones, and the leaching reagent concentration decreased gradually from 20 to 9.3 g/L. In accordance with the breakthrough curve, the breakthrough capacity of ion-type rare earth ore and the adsorbed ion concentration of leaching reagent were derived, the time of t=25 s was the breakthrough point of ammonium ion in leaching reagent and the breakthrough capacity of the rare earth ore was 125 g/L. Besides, the chemical kinetics parameters used for the solute transfer process of rare earth leaching were obtained by the simulation and then were used to determine the rate-limiting steps of rare earth leaching process.展开更多
The liquid droplet evaporation character is important for not only combustion chamber design process but also high-accuracy spray combustion simulation. In this paper, the suspended droplets＇ evaporation character wa...The liquid droplet evaporation character is important for not only combustion chamber design process but also high-accuracy spray combustion simulation. In this paper, the suspended droplets＇ evaporation character was measured in a quiescent high-temperature environment by micro high-speed camera system. The gasoline and kerosene experimental results are consistent with the reference data. Methanol, common kerosene and aviation kerosene droplet evaporation characteristics, as well as their evaporation rate changing with temperature, were obtained. The evaporation rate experimental data were compared with the prediction result of Ranz-Marshall boiling temperature model（RMB）, Ranz-Marshall low-temperature model（RML）, drift flux model（DFM）, mass analogy model（MAM）, and stagnant film model（SFM）. The disparity between the experimental data and the model prediction results was mainly caused by the neglect of the natural convection effect, which was never introduced into the droplet evaporation concept. A new droplet evaporation model with consideration of natural convection buoyancy force effect was proposed in this paper. Under the experimental conditions in this paper, the calculation results of the new droplet evaporation model were agreed with the experimental data for kerosene, methanol and other fuels, with less than 20% relative deviations. The relative deviations between the new evaporation model predictions for kerosene and the experimental data from the references were within 10%.展开更多
The marine dynamic environment of the Bohai Sea and the Yellow Sea in the winter of 2006 is simulated by the Regional Ocean Modelling System（ROMS） marine numerical model. Using the simulated temperature and salinity...The marine dynamic environment of the Bohai Sea and the Yellow Sea in the winter of 2006 is simulated by the Regional Ocean Modelling System（ROMS） marine numerical model. Using the simulated temperature and salinity, the water exchange zone between the Bohai Sea and Yellow Sea is defined through the Spectral Mixture Model（SMM）. The influence of winter gales on the water exchange is also discussed. It is found that the Yellow Sea water masses in winter are distributed in a ＂tongue＂ shape in the Bohai Strait region, the water exchange zone presents a zonal distribution along the margin of the ＂tongue＂, with a tendency of running from northwest to southeast, and the water exchange is intensified at the tip of the ＂tongue＂. Besides, the coastal area in the northernmost Yellow Sea does not participate in the water exchange between the Bohai Sea and Yellow Sea. The result shows that the winter gale events play a role in enhancing the water exchange. It is specifically shown by the facts： the Yellow Sea warm current is enhanced to intrude the Bohai Sea by the gale process; the water exchange zone extends into the Bohai Sea; the water exchange belt in the southern part becomes wider; the mixture zone of river runoff with the Bohai Sea water upon its entry is enlarged and shifts northwards. Within two days after the gale process, the exchange zone retreats toward the Yellow Sea and the exchange zone resulted from the Huanghe River（Yellow River） runoff also shrinks back shoreward.展开更多
BACKGROUND As one of the fatal diseases with high incidence,lung cancer has seriously endangered public health and safety.Elderly patients usually have poor self-care and are more likely to show a series of psychologi...BACKGROUND As one of the fatal diseases with high incidence,lung cancer has seriously endangered public health and safety.Elderly patients usually have poor self-care and are more likely to show a series of psychological problems.AIM To investigate the effectiveness of the initial check,information exchange,final accuracy check,reaction(IIFAR)information care model on the mental health status of elderly patients with lung cancer.METHODS This study is a single-centre study.We randomly recruited 60 elderly patients with lung cancer who attended our hospital from January 2021 to January 2022.These elderly patients with lung cancer were randomly divided into two groups,with the control group taking the conventional propaganda and education and the observation group taking the IIFAR information care model based on the conventional care protocol.The differences in psychological distress,anxiety and depression,life quality,fatigue,and the locus of control in psychology were compared between these two groups,and the causes of psychological distress were analyzed.RESULTS After the intervention,Distress Thermometer,Hospital Anxiety and Depression Scale(HADS)for anxiety and the HADS for depression,Revised Piper’s Fatigue Scale,and Chance Health Locus of Control scores were lower in the observation group compared to the pre-intervention period in the same group and were significantly lower in the observation group compared to those of the control group(P<0.05).After the intervention,Quality of Life Questionnaire Core 30(QLQ-C30),Internal Health Locus of Control,and Powerful Others Health Locus of Control scores were significantly higher in the observation and the control groups compared to the pre-intervention period in their same group,and QLQ-C30 scores were significantly higher in the observation group compared to those of the control group(P<0.05).CONCLUSION The IIFAR information care model can help elderly patients with lung cancer by reducing their anxiety and depression,psychological distress,and fatigue,improving their tendencies on the locus of control in psychology,and enhancing their life qualities.展开更多
With the globalization and diversification of the market and the rapid development of Information Technology(IT)and Artificial Intelligence(AI),the digital revolution of manufacturing is coming.One of the key technolo...With the globalization and diversification of the market and the rapid development of Information Technology(IT)and Artificial Intelligence(AI),the digital revolution of manufacturing is coming.One of the key technologies in digital manufacturing is product digital modeling.This paper firstly analyzes the information and features of the product digital model during each stage in the product whole lifecycle,then researches on the three critical technologies of digital modeling in digital man-ufacturing-product modeling,standard for the exchange of product model data and digital product data management.And the potential signification of the product digital model during the process of digital manufacturing is concluded-product digital model integrates primary features of each stage during the product whole lifecycle based on graphic features,applies STEP as data ex-change mechanism,and establishes PDM system to manage the large amount,complicated and dynamic product data to implement the product digital model data exchange,sharing and integration.展开更多
Denial of Service Distributed Denial of Service （DOS） attack, especially （DDoS） attack, is one of the greatest threats to Internet. Much research has been done for it by now, however, it is always concentrated in ...Denial of Service Distributed Denial of Service （DOS） attack, especially （DDoS） attack, is one of the greatest threats to Internet. Much research has been done for it by now, however, it is always concentrated in the behaviors of the network and can not deal with the problem exactly. In this paper, we start from the security of the protocol, then we propose a novel theory for security protocol analysis of Denial of Service in order to deal with the DoS attack. We first introduce the conception of weighted graph to extend the strand space model, then we extend the penetrator model and define the goal of anti-DoS attack through the conception of the DoS-stop protocol, finally we propose two kinds of DoS test model and erect the novel formal theory for security protocol analysis of Denial of Service. Our new formal theory is applied in two example protocols. It is proved that the Internet key exchange （IKE） easily suffers from the DoS attacks, and the efficient DoS- resistant secure key exchange protocol （JFK） is resistant against DoS attack for the server, respectively.展开更多
In this paper, the mathematical dynamical model of a PEMFC （proton exchange membrane fuel cells） stack, integrated with an automotive synchronous electrical power drive, developed in Matlab environment, is shown. Lo...In this paper, the mathematical dynamical model of a PEMFC （proton exchange membrane fuel cells） stack, integrated with an automotive synchronous electrical power drive, developed in Matlab environment, is shown. Lots of simulations have been executed in many load conditions. In this paper, the load conditions regarding an electrical vehicle for disabled people is reported. The innovation in this field concerns the integration, in the PEMFC stack mathematical dynamic model, of a synchronous electrical power drive for automotive purposes. Goal of the simulator design has been to create an useful tool which is able to evaluate the behaviour of the whole system so as to optimize the components choose. As regards the simulations with a synchronous electrical power drive, the complete mathematical model allows to evaluate the PEMFC stack performances and electrochemical efficiency.展开更多
文摘Based on Pomeron exchange model, elastic production of vector meson in electro-proton interaction is investigated with both linear and non-linear Pomeron trajectory. A numerical calculation for J/psi production is performed. The effect of the energy scale so and photon virtuality Q(2) on differential cross section are also predicted. A good agreement with experimental data is obtained. Our conclusions are that the Pomeron exchange model is a successful description of J/psi electro-production, the dependence of the differential cross sections on Q2 is negligible, the linear trajectory is a good approximation to non-linearity of the Pomeron trajectory, and the value of the energy scale parameter so is dependent on the momentum transfer, namely its effect is moderate at low momentum transfer but it causes no difference at high momentum transfer vertical bar t vertical bar >= 1.25 GeV2.
基金The project supported in part by National Natural Science Foundation of China under Grant Nos. 10565001, 10647002 and the Natural Science Foundation of Guangxi under Grant No. 0481030, 0542042, and 0575020, Guangxi University under Grant No. X051001, and Guangxi University of Technology under Grant No. 05006
文摘Based on Pomeron exchange model, J/ψ and φ production in electro-proton interaction are investigated with both linear and non-linear Pomeron trajectory. The experimental differential cross sections measured as a function of the kinematic variable Q^2,W and t are reproduced successfully in the model. Our conclusions are that the Pomeron exchange model is a successful description of J/ψ and φ electro-productions on the proton, and that the linear trajectory is a good approximation to non-linearity of the Pomeron trajectory.
基金国家自然科学基金，广西自然科学基金，Guangxi University under Contract
文摘Based on the Pomeron exchange model, elastic production of φ meson in electron-proton interaction is investigated with both linear and non-linear Pomeron trajectories. The numerical calculations of the differential cross section for e + p → e' + p+ φ are performed. The theoretical predictions show that the dependence of the differentialcross section on virtual photon virtuality, Q2, is of moderation, the change of the energy scale parameter so causes moderate effect on the differential cross section, and the linear trajectory is a good approximation to non-linearity of the Pomeron trajectory, in particular, at small momentum transfer region | t |≤ 0.2 GeV2.
基金Supported by DFG (Deutsche Forschungsgemeinschaft, Gz: DO 1302/1-1)Helmholtz Association through funds provided to the virtual institute 'Spin and Strong QCD' (VH-VI-231)EU-Research Infrastructure Integrating Activity 'Study of Strongly Interacting Matter' (Hadron Physics2 (227431)) under the Seventh Framework Program of EU and by the DFG (TR 16), COSY FFE (41445282)(COSY-58)
文摘In this talk, I present the results on the pole structure of pion-nucleon scattering in an analytic model based on meson exchange. The analytic properties of scattering amplitudes provide important information. Besides the cuts, the poles and zeros on the different Riemann sheets determine the global behavior of the amplitude on the physical axis. Pole positions and residues allow for a parameterization of resonances in a well-defined way, free of assumptions for the background and energy dependence of the resonance part. This is a necessary condition to relate resonance contributions in different reactions.
基金co-supported by the National Key R&D Program of China(Nos.2017YFB0202400 and 2017YFB0202402)the National Natural Science Foundaion of China(No.91741125)。
文摘In order to investigate the high-temperature evaporation characteristics of multicomponent liquid fuel,three kinds of blended fuel:n-heptane/n-decane/RP-3 aviation kerosene-ethanol were experimentally studied with and without forced convection.Further,based on zerodiffusion and infinite diffusion concept,this study expanded Thick Exchange Layer evaporation model with Natural Convection effect(NC-TEL)to multicomponent liquid fuels.The experimental results show that the droplet evaporation rate increases significantly with the increase of ambient temperature.Higher temperature leads to more significant relationships between the composition ratio and the evaporation rate.The effect of forced convection is not obviously under the circumstance in this paper.Then,the evaporation models were validated by experimental data.In general,the new NC-TEL model behaves better than the Ranz-Marshall(R-M)model,and the prediction accuracy at high temperature is improved by 8%to 35%.In lower temperature conditions,the prediction of zero-diffusion NC-TEL model is better than the infinite diffusion NC-TEL model.In high-temperature conditions,for n-heptane-ethanol droplet,the predictions of NC-TEL model are accurate,but for n-decane/RP-3 aviation kerosene-ethanol,the predictions are lower than experimental results.This may be caused by the micro-explosion phenomenon and the Marangoni phenomenon.
基金Supported by the National Natural Science Foundation of China(21576036,21406026)
文摘Due to the deterioration of serious energy dilemma,energy-conservation and emission–reduction have been the strategic target in the past decades,thus people have identified the vital importance of higher energy efficiency and the influence of lower carbon development.Since work exchange network is a significant part of energy recovery system,its optima design will have dramatically significant effect on energy consumption reduction in chemical process system.With an extension of the developed transshipment model in isothermal process,a novel step-wise methodology for synthesis of direct work exchange network(WEN)in adiabatic process involving heat integration is first proposed in this paper,where a nonlinear programming(NLP)model is formulated by regarding the minimum utility consumption as objective function and optimizing the initial WEN in accordance with the presented matching rules to get the optimized WEN configuration at first.Furthermore,we focus on the work exchange network synthesis with heat integration to attain the minimal total annual cost(TAC)with the introduction of heat-exchange equipment that is achieved by the following strategies in sequence:introducing heat-exchange equipment directly,adjusting the work quantity of the adjacent utility compressors or expanders,and approximating upper/lower pressure limits consequently to obtain considerable cost savings of expanders or compressors and work utility.Finally,a case taken from the literature is studied to illustrate the feasibility and effectiveness of the proposed method.
基金the funding of the present study by the German Federation of Industrial Research Associations(AiF)(FKZ VP 2470101RH9)
文摘Perfluorooctane sulfonate（PFOS） has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force（LDF） approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.
基金Supported by Science&Technology Sponsoring Project of Ministry of Education(105161)
文摘A model-exchange method based on feature between isomerous CAD systems is put forward in this paper.In this method,CAD model information is accessed at both feature and geometry levels and converted according to standard feature opera- tion.The feature information including feature tree,dimensions and constraints,which will be lost in traditional data conver- sion,as well as geometry are converted completely from source CAD system to destination one.So the transferred model can be edit- ed through feature operation,which cannot be implemented by general model-exchange interface.
文摘Using a monetary model of exchange rate determination that suggests a strong link between the nominal exchange rate and a set of monetary fundamentals, exchange rate dynamics for the Czech Republic, Hungary, and Poland is studied. As the cointegration relationship among exchange rate, output, and the monetary fundamentals （money supply and interest rate） is found, vector autoregressions （VAR）/vector error-correction （VEC） and two-stage least squares （2SLS） error-correction models are used in this context, since both approaches allow estimating short-run correlations between exchange rates and fundamentals while taking into account the existent long-run exchange rate constraints. Based on the quarterly data for the period of 1998-2012, it is found that for all countries, an increase in the money supply, domestic output slowdown, or stronger growth abroad are factors behind a nominal exchange rate depreciation, just as predicted by the monetary model of exchange rate. However, the effects of domestic-foreign interest rate differential are quite heterogeneous, being in line with theoretical predictions of a standard monetary model for Poland only. According to the decomposition of variance, money supply and interest rates account for 30%-46% of the exchange rate variation in the Czech Republic, from 10% to 14% in Hungary, and from 23% to 42% in Poland.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 51031004,11004027,and 11074113)the National Basic Research Program of China (Grant Nos. 2011CB922101 and 2009CB929501)the Priority Academic Program Development of Jiangsu Provincial Higher Education Institutions,China
文摘The semi-quantum two-orbital exchange model is used to investigate the effect of small rare-earth ion substitution on orthorhombic RMnO 3 with A-type antiferromagnetic order,using the Monte Carlo algorithm,exact diagonalization,and zero-temperature optimization approaches.It is revealed that the substitution results in a rich multiferroic phase diagram where the coexisting A-type antiferromagnetic phase and spiral spin phase,pure spiral spin phase,coexisting spiral spin phase,the E-type antiferromagnetic phase,and the pure E-type antiferromagnetic phase emerge in sequence.The multiferroic phase transitions modulate substantially the electric polarization,which is consistent qualitatively with recent experiments.
基金supported by the grants from the Ministry of Science and Technology of China(No.2015CB856800)the National Natural Science Foundation of China(Nos.51171098 and 51222102)
文摘The homogeneous plastic flow in bulk metallic glasses （BMGs） must be elucidated by an appropriate atomistic mechanism. It is proposed that a so-called concordant shifting model, based on rearrangements of five-atom subclusters, can describe the plastic strain behaviour of BMGs in a temperature range from room temperature to the supercooled liquid region. To confirm the effectiveness of the atomic concordant shifting model, a comparative investigation between the vacancy/atom model and the concordant shifting model is carried out based on the estimation of the strain rate deduced from two models. Our findings suggest that the atomic concordant shifting model rather than the vacancy/atom exchange model can well predict the large strain rate in the superplasticity of BMGs.
基金support from the Natural Science Foundation of Shandong Province (Grant no.ZR2013BL010)the Research Excellence Award of Shandong University of Technology and the Zibo Technology Research and Development Program of China (Grant no.2013GG04110)
文摘This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins（SCER）. The effects of the mass ratio of methanol to acidified oil,reaction temperature,and catalyst loading were studied to optimize the conditions for maximum conversion of free fatty acids（FFAs）. The results showed that the optimal conversion rate of FFAs was 91.87% at the mass ratio of methanol to acidified oil of 2.5：1.0,reaction temperature of 65.0 °C,catalyst loading of 5.0 g and reaction time of 8.0 h. The external and internal mass transfer resistances were negligible based on the experimental results and a pseudo-homogeneous kinetic model was proposed for the esterification. The activation energy and thermodynamic parameters including G,S and H were determined. The conversion rates of FFAs obtained from the established model were in good agreement with the experimental data.
基金Department of Science and Technology,Government of India for providing financial support under the scheme FIST(No.SR/FST/ETI-388/2015)。
文摘Fixture design and planning is one of the most important manufacturing activities, playing a pivotal role in deciding the lead time for product development. Fixture design, which affects the part-quality in terms of geometric accuracy and surface finish, can be enhanced by using the product manufacturing information(PMI) stored in the neutral standard for the exchange of product model data(STEP) file, thereby integrating design and manufacturing. The present paper proposes a unique fixture design approach, to extract the geometry information from STEP application protocol(AP) 242 files of computer aided design(CAD) models, for providing automatic suggestions of locator positions and clamping surfaces. Automatic feature extraction software "FiXplan", developed using the programming language C#, is used to extract the part feature, dimension and geometry information. The information from the STEP AP 242 file is deduced using geometric reasoning techniques, which in turn is utilized for fixture planning. The developed software is observed to be adept in identifying the primary, secondary, and tertiary locating faces and locator position configurations of prismatic components. Structural analysis of the prismatic part under different locator positions was performed using commercial finite element method software, ABAQUS, and the optimized locator position was identified on the basis of minimum deformation of the workpiece.The area-ratio(base locator enclosed area(%)/work piece base area(%)) for the ideal locator configuration was observed as 33%. Experiments were conducted on a prismatic workpiece using a specially designed fixture, for different locator configurations. The surface roughness and waviness of the machined surfaces were analysed using an Alicona non-contact optical profilometer. The best surface characteristics were obtained for the surface machined under the ideal locator positions having an area-ratio of 33%, thus validating the predicted numerical results. The efficiency, capability and applicability of the developed software is demonstrated for the finishing operation of a sensor cover – a typical prismatic component having applications in the naval industry, under different locator configurations.The best results were obtained under the proposed ideal locator configuration of area-ratio 33%.
基金supported by the National Natural Science Foundation of China(51674125,51776212,91434113)National Key Basic Research Program of China(2015CB251402)Chinese Academy of Sciences(QYZDB-SSW-SYS029)and Outstanding Doctoral Dissertation Project Fund of JXUST(YB2016001)
文摘The lattice Boltzmann model with coupled chemical reaction was proposed to simulate the ion exchange process of rare earth leaching and verified by comparison with both empirical correlation of mass transfer coefficient and unreacted-core shrinking model. By simulation, the zonation phenomenon of leaching reagent in the leaching column was presented, and the breakthrough curve of leaching reagent was obtained. When t=50 s, there existed the saturated and exchange zones, and the leaching reagent concentration decreased gradually from 20 to 9.3 g/L. In accordance with the breakthrough curve, the breakthrough capacity of ion-type rare earth ore and the adsorbed ion concentration of leaching reagent were derived, the time of t=25 s was the breakthrough point of ammonium ion in leaching reagent and the breakthrough capacity of the rare earth ore was 125 g/L. Besides, the chemical kinetics parameters used for the solute transfer process of rare earth leaching were obtained by the simulation and then were used to determine the rate-limiting steps of rare earth leaching process.
基金supported by the National Natural Science Foundation of China (No. 51106006)
文摘The liquid droplet evaporation character is important for not only combustion chamber design process but also high-accuracy spray combustion simulation. In this paper, the suspended droplets＇ evaporation character was measured in a quiescent high-temperature environment by micro high-speed camera system. The gasoline and kerosene experimental results are consistent with the reference data. Methanol, common kerosene and aviation kerosene droplet evaporation characteristics, as well as their evaporation rate changing with temperature, were obtained. The evaporation rate experimental data were compared with the prediction result of Ranz-Marshall boiling temperature model（RMB）, Ranz-Marshall low-temperature model（RML）, drift flux model（DFM）, mass analogy model（MAM）, and stagnant film model（SFM）. The disparity between the experimental data and the model prediction results was mainly caused by the neglect of the natural convection effect, which was never introduced into the droplet evaporation concept. A new droplet evaporation model with consideration of natural convection buoyancy force effect was proposed in this paper. Under the experimental conditions in this paper, the calculation results of the new droplet evaporation model were agreed with the experimental data for kerosene, methanol and other fuels, with less than 20% relative deviations. The relative deviations between the new evaporation model predictions for kerosene and the experimental data from the references were within 10%.
基金The National Natural Science Foundation of China under contract Nos 41206013,41376014,41430963 and41106004the Key Marine Science Foundation of the State Oceanic Administration of China for Young Scholar under contract Nos2012202,2013203 and 2012223+2 种基金the Public Science and Technology Research Funds Projects of Ocean under contract No.201205018the National Science and Technology Support Program under contract No.2014BAB12B02the Tianjin Science and Technology Support Program under contract No.14ZCZDSF00012
文摘The marine dynamic environment of the Bohai Sea and the Yellow Sea in the winter of 2006 is simulated by the Regional Ocean Modelling System（ROMS） marine numerical model. Using the simulated temperature and salinity, the water exchange zone between the Bohai Sea and Yellow Sea is defined through the Spectral Mixture Model（SMM）. The influence of winter gales on the water exchange is also discussed. It is found that the Yellow Sea water masses in winter are distributed in a ＂tongue＂ shape in the Bohai Strait region, the water exchange zone presents a zonal distribution along the margin of the ＂tongue＂, with a tendency of running from northwest to southeast, and the water exchange is intensified at the tip of the ＂tongue＂. Besides, the coastal area in the northernmost Yellow Sea does not participate in the water exchange between the Bohai Sea and Yellow Sea. The result shows that the winter gale events play a role in enhancing the water exchange. It is specifically shown by the facts： the Yellow Sea warm current is enhanced to intrude the Bohai Sea by the gale process; the water exchange zone extends into the Bohai Sea; the water exchange belt in the southern part becomes wider; the mixture zone of river runoff with the Bohai Sea water upon its entry is enlarged and shifts northwards. Within two days after the gale process, the exchange zone retreats toward the Yellow Sea and the exchange zone resulted from the Huanghe River（Yellow River） runoff also shrinks back shoreward.
文摘BACKGROUND As one of the fatal diseases with high incidence,lung cancer has seriously endangered public health and safety.Elderly patients usually have poor self-care and are more likely to show a series of psychological problems.AIM To investigate the effectiveness of the initial check,information exchange,final accuracy check,reaction(IIFAR)information care model on the mental health status of elderly patients with lung cancer.METHODS This study is a single-centre study.We randomly recruited 60 elderly patients with lung cancer who attended our hospital from January 2021 to January 2022.These elderly patients with lung cancer were randomly divided into two groups,with the control group taking the conventional propaganda and education and the observation group taking the IIFAR information care model based on the conventional care protocol.The differences in psychological distress,anxiety and depression,life quality,fatigue,and the locus of control in psychology were compared between these two groups,and the causes of psychological distress were analyzed.RESULTS After the intervention,Distress Thermometer,Hospital Anxiety and Depression Scale(HADS)for anxiety and the HADS for depression,Revised Piper’s Fatigue Scale,and Chance Health Locus of Control scores were lower in the observation group compared to the pre-intervention period in the same group and were significantly lower in the observation group compared to those of the control group(P<0.05).After the intervention,Quality of Life Questionnaire Core 30(QLQ-C30),Internal Health Locus of Control,and Powerful Others Health Locus of Control scores were significantly higher in the observation and the control groups compared to the pre-intervention period in their same group,and QLQ-C30 scores were significantly higher in the observation group compared to those of the control group(P<0.05).CONCLUSION The IIFAR information care model can help elderly patients with lung cancer by reducing their anxiety and depression,psychological distress,and fatigue,improving their tendencies on the locus of control in psychology,and enhancing their life qualities.
文摘With the globalization and diversification of the market and the rapid development of Information Technology(IT)and Artificial Intelligence(AI),the digital revolution of manufacturing is coming.One of the key technologies in digital manufacturing is product digital modeling.This paper firstly analyzes the information and features of the product digital model during each stage in the product whole lifecycle,then researches on the three critical technologies of digital modeling in digital man-ufacturing-product modeling,standard for the exchange of product model data and digital product data management.And the potential signification of the product digital model during the process of digital manufacturing is concluded-product digital model integrates primary features of each stage during the product whole lifecycle based on graphic features,applies STEP as data ex-change mechanism,and establishes PDM system to manage the large amount,complicated and dynamic product data to implement the product digital model data exchange,sharing and integration.
基金This work is supported by National Natural Science Foundation of China under contract 60902008.
文摘Denial of Service Distributed Denial of Service （DOS） attack, especially （DDoS） attack, is one of the greatest threats to Internet. Much research has been done for it by now, however, it is always concentrated in the behaviors of the network and can not deal with the problem exactly. In this paper, we start from the security of the protocol, then we propose a novel theory for security protocol analysis of Denial of Service in order to deal with the DoS attack. We first introduce the conception of weighted graph to extend the strand space model, then we extend the penetrator model and define the goal of anti-DoS attack through the conception of the DoS-stop protocol, finally we propose two kinds of DoS test model and erect the novel formal theory for security protocol analysis of Denial of Service. Our new formal theory is applied in two example protocols. It is proved that the Internet key exchange （IKE） easily suffers from the DoS attacks, and the efficient DoS- resistant secure key exchange protocol （JFK） is resistant against DoS attack for the server, respectively.
文摘In this paper, the mathematical dynamical model of a PEMFC （proton exchange membrane fuel cells） stack, integrated with an automotive synchronous electrical power drive, developed in Matlab environment, is shown. Lots of simulations have been executed in many load conditions. In this paper, the load conditions regarding an electrical vehicle for disabled people is reported. The innovation in this field concerns the integration, in the PEMFC stack mathematical dynamic model, of a synchronous electrical power drive for automotive purposes. Goal of the simulator design has been to create an useful tool which is able to evaluate the behaviour of the whole system so as to optimize the components choose. As regards the simulations with a synchronous electrical power drive, the complete mathematical model allows to evaluate the PEMFC stack performances and electrochemical efficiency.
