To clarify the densification behavior,deformation response and strengthening mechanisms of selective laser melted(SLM)Mg-RE alloys,this study systematically investigates a representative WE43 alloy via advanced materi...To clarify the densification behavior,deformation response and strengthening mechanisms of selective laser melted(SLM)Mg-RE alloys,this study systematically investigates a representative WE43 alloy via advanced material characterization techniques.A suitable laser output mode fell into the transition mode,allowing for the fabrication of nearly full-density samples(porosity=0.85±0.021%)with favorable mechanical properties(yield strength=351 MPa,ultimate tensile strength=417 MPa,the elongation at break=6.5%and microhardness=137.9±6.15 HV_(0.1))using optimal processing parameters(P=80 W,v=250 mm/s and d=50μm).Viscoplastic self-consistent analysis and transmission electron microscopy observations reveal that the plastic deformation response of the SLM Mg-RE alloys is primarily driven by basal and prismatic slips.Starting from a random texture before deformation(maximum multiple of ultimate density,Max.MUD=3.95),plastic stretching led the grains to align with the Z-axis,finally resulting in a{0001}<1010>texture orientation after fracture(Max.MUD=8.755).Main phases of the SLM state are mainly composed ofα-Mg,Mg_(24)Y_(5) andβ'-Mg_(41)Nd_(5),with an average grain size of only 4.27μm(about a quarter of that in the extruded state),resulting in a favorable strength-toughness ratio.Except for the nano-β'phase and semi-coherent Mg_(24)Y_(5) phase(mismatch=16.12%)around the grain boundaries,a small amount of nano-ZrO_(2) and Y_(2)O_(3) particles also play a role in dispersion strengthening.The high mechanical properties of the SLM state are chiefly attributed to precipitation hardening(44.41%),solid solution strengthening(34.06%)and grain boundary strengthening(21.53%),with precipitation hardening being predominantly driven by dislocation strengthening(67.77%).High-performance SLM Mg-RE alloy components were manufactured and showcased at TCT Asia 2024,receiving favorable attention.This work underscores the significant application potential of SLM Mg-RE alloys and establishes a strong foundation for advancing their use in the biomedical fields.展开更多
Since the 21st century,the Huang–Huai–Hai River Basin(HHHRB)in China has experienced increased frequency and severity of drought–flood abrupt alternation(DFAA)events during early summer,characterized by droughts in...Since the 21st century,the Huang–Huai–Hai River Basin(HHHRB)in China has experienced increased frequency and severity of drought–flood abrupt alternation(DFAA)events during early summer,characterized by droughts in June followed by floods in July.The 2024 event was the most severe since 1981.This study demonstrates that such compound extreme events are closely linked to anomalous subseasonal evolution of large-scale atmospheric circulation.During the drought phase,the East Asian subtropical westerly jet(EAJ)shifts southward,and the western Pacific subtropical high(WPSH)exhibits anomalous strengthening with its western ridge line displaced southward.The flood phase is characterized by acceleration of the EAJ,westward extension of the WPSH,and enhanced southwestern moisture transport from the western Pacific.Beyond these typical features,the 2024 early summer circulation exhibited unique characteristics:Anomalous northeastward intensification of the WPSH facilitated merged moisture influx from both the Indian Ocean and the western Pacific along the southeast pathway into the HHHRB in July,resulting in the highest net moisture inflow at the southern boundary of the HHHRB since 1981.The synergistic effects of multiple factors primarily explain the exceptionally intense DFAA event in 2024.展开更多
In this work,the phase evolution mechanism and nanomechanical properties of(CoCrNi))(82)Al_(9)Ti_(9)high-entropy alloy(HEA)prepared by selective laser melting(SLM)in the molten pool were studied.This HEA contains mult...In this work,the phase evolution mechanism and nanomechanical properties of(CoCrNi))(82)Al_(9)Ti_(9)high-entropy alloy(HEA)prepared by selective laser melting(SLM)in the molten pool were studied.This HEA contains multiple primary elements and undergoes high-temperature gradient and rapid cooling during SLM.This leads to significant inhomogeneity of nano-scale microstructure characteristics and instability of properties.After optimizing process parameters,the microstructure evolution at the optimal parameter volume energy density of 440 J/mm^(3)was studied.A phase transition from BCC to FCC occurred in the melt micro-zone.Remelting the micro-area of the melt pool results in a temperature rise and the combustion-induced loss of Al elements.Moreover,the Ni element content increases significantly outside the melt pool.This process enhances the phase stability of FCC and facilitates phase transitions.Additionally,rapid cooling leads to the formation of distinctive ultrafine equiaxial crystals inside the melt pool,accompanied by the generation of intracrystalline needle-like nano-scale phases.Outside the melt pool,the accumulation of energy results in the formation of coarse dendrites.Therefore,the nano-hardness inside the molten pool is remarkably high at 11.79 GPa,while the outside the molten pool is reduced to 9.58 GPa.And the fracture toughness outside the melt pool also decreased.Comparing with inside the melt pool,the residual stress outside the melt pool changed from compressive to tensile stress and decreased from 603.28 to 322.84 MPa.展开更多
Typical Q235 low-carbon steel samples with different hydrogen contents(0.0004,0.0008,and 0.0013 wt.%)were prepared by adjusting the environment humidity and moisture.The effects of hydrogen on interfacial heat transfe...Typical Q235 low-carbon steel samples with different hydrogen contents(0.0004,0.0008,and 0.0013 wt.%)were prepared by adjusting the environment humidity and moisture.The effects of hydrogen on interfacial heat transfer,contact behavior,and microstructure evolution were investigated using a novel droplet solidification technique.The results revealed that when the hydrogen content increases from 0.0004 to 0.0013 wt.%,the maximum heat flux between the molten steel and cooling substrate decreases from 8.01 to 6.19 MW/m^(2),and the total heat removed in the initial 2 s reduces from 10.30 to 8.27 MJ/m^(2).Moreover,the final contact angle between the molten steel and substrate increases from 103.741°to 113.697°,and the number of pores on the droplet bottom surface increases significantly from 21 to 210 with the increase in hydrogen.The surface roughness of the droplet bottom surface increases from 20.902 to 49.181 pm.In addition,the average grain size of the droplet increases from 14.778 to 33.548 pm with the increase in the hydrogen content.The interfacial contact condition becomes worse due to the escape of hydrogen from the steel matrix during the cooling process,which leads to the reduction in the interfacial heat transfer and the increase in the grain size.展开更多
Animal models have been a crucial tool in neuroscience research for decades,providing insights into the biomedical and evolutionary mechanisms of the nervous system,disease,and behavior.However,their use has raised co...Animal models have been a crucial tool in neuroscience research for decades,providing insights into the biomedical and evolutionary mechanisms of the nervous system,disease,and behavior.However,their use has raised concerns on several ethical,clinical,and scientific considerations.The welfare of animals and the 3R principles(replacement,reduction,refinement)are the focus of the ethical concerns,targeting the importance of reducing the stress and suffering of these models.Several laws and guidelines are applied and developed to protect animal rights during experimenting.Concurrently,in the clinic and biomedical fields,discussions on the relevance of animal model findings on human organisms have increased.Latest data suggest that in a considerable amount of time the animal model results are not translatable in humans,costing time and money.Alternative methods,such as in vitro(cell culture,microscopy,organoids,and micro physiological systems)techniques and in silico(computational)modeling,have emerged as potential replacements for animal models,providing more accurate data in a minimized cost.By adopting alternative methods and promoting ethical considerations in research practices,we can achieve the 3R goals while upholding our responsibility to both humans and other animals.Our goal is to present a thorough review of animal models used in neuroscience from the biomedical,evolutionary,and ethical perspectives.The novelty of this research lies in integrating diverse points of views to provide an understanding of the advantages and disadvantages of animal models in neuroscience and in discussing potential alternative methods.展开更多
High/medium entropy alloys(HEAs/MEAs)with high electrocatalytic activity have attracted great attention in water electrolysis applications.However,facile synthesis of self-supporting high/medium entropy alloys electro...High/medium entropy alloys(HEAs/MEAs)with high electrocatalytic activity have attracted great attention in water electrolysis applications.However,facile synthesis of self-supporting high/medium entropy alloys electrocatalysts with rich active sites through classical metallurgical methods is still a challenge.Here,a self-supporting porous FeCoNi MEA electrocatalyst with nanosheets-shaped surface for oxygen evolution reaction(OER)was prepared by a one-step electrochemical process from the metal oxides in molten CaCl_(2).The formation of the FeCoNi MEA is attributed to the oxides electro-reduction,high-temperature diffusion and solid solution.Additionally,the morphology and structure of the FeCoNi MEA can be precisely controlled by adjusting the electrolysis time and temperature.The electronic structure regulation and the reduced energy barrier of OER from the“cocktail effect”,the abundant exposed active sites brought by surface ultrathin nanosheets,the good electronic conductivity and electrochemical stability from the self-supporting structure enable the FeCoNi MEA electrode shows high-performance OER electrocatalysis,exhibiting a low overpotential of 233 mV at a current density of 10 mA cm^(-2),a low Tafel slope of 29.8 mV dec^(-1),and an excellent stability for over 500 h without any obvious structural destruction.This work demonstrates a facile one-step electrochemical metallurgical approach for fabricating self-supporting HEAs/MEAs electrocatalysts with nanosized surface for the application in water electrolysis.展开更多
The utilization of iron coke provides a green pathway for low-carbon ironmaking.To uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the micro...The utilization of iron coke provides a green pathway for low-carbon ironmaking.To uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the microstructure of iron coke was investigated.Furthermore,a comparative study of the gasification reactions between iron coke and coke was conducted through non-isothermal thermogravimetric method.The findings indicate that compared to coke,iron coke exhibits an augmentation in micropores and specific surface area,and the micropores further extend and interconnect.This provides more adsorption sites for CO_(2) molecules during the gasification process,resulting in a reduction in the initial gasification temperature of iron coke.Accelerating the heating rate in non-isothermal gasification can enhance the reactivity of iron coke.The metallic iron reduced from iron ore is embedded in the carbon matrix,reducing the orderliness of the carbon structure,which is primarily responsible for the heightened reactivity of the carbon atoms.The kinetic study indicates that the random pore model can effectively represent the gasification process of iron coke due to its rich pore structure.Moreover,as the proportion of iron ore increases,the activation energy for the carbon gasification gradually decreases,from 246.2 kJ/mol for coke to 192.5 kJ/mol for iron coke 15wt%.展开更多
Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching,adjusting dielectric/magnetic resonance and promoting electromagnetic(EM)wave absorption,but still exist a significan...Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching,adjusting dielectric/magnetic resonance and promoting electromagnetic(EM)wave absorption,but still exist a significant challenging in regulating local phase evolution.Herein,accordion-shaped Co/Co_(3)O_(4)@N-doped carbon nanosheets(Co/Co_(3)O_(4)@NC)with gradient magnetic heterointerfaces have been fabricated via the cooperative high-temperature carbonization and lowtemperature oxidation process.The results indicate that the surface epitaxial growth of crystal Co_(3)O_(4) domains on local Co nanoparticles realizes the adjustment of magnetic-heteroatomic components,which are beneficial for optimizing impedance matching and interfacial polarization.Moreover,gradient magnetic heterointerfaces simultaneously realize magnetic coupling,and long-range magnetic diffraction.Specifically,the synthesized Co/Co_(3)O_(4)@NC absorbents display the strong electromagnetic wave attenuation capability of−53.5 dB at a thickness of 3.0 mm with an effective absorption bandwidth of 5.36 GHz,both are superior to those of single magnetic domains embedded in carbon matrix.This design concept provides us an inspiration in optimizing interfacial polarization,regulating magnetic coupling and promoting electromagnetic wave absorption.展开更多
轨道交通LTE-M(Long Term Evolution-Metro,基于轨道交通的长期演进)同频干扰检测关乎列控信号传输的可靠性,提出一种基于INFO(weIghted meaNoFvectOrs,基于向量加权平均)算法的盲源分离方法,即INFO-BSS。该方法以混合信号的最大化负熵...轨道交通LTE-M(Long Term Evolution-Metro,基于轨道交通的长期演进)同频干扰检测关乎列控信号传输的可靠性,提出一种基于INFO(weIghted meaNoFvectOrs,基于向量加权平均)算法的盲源分离方法,即INFO-BSS。该方法以混合信号的最大化负熵为目标函数,用INFO优化算法替代牛顿迭代法,解决了牛顿迭代法初始参数易设置不当以及容易陷入局部最优的问题。仿真结果对比表明,在不同分辨率带宽、不同信干比等条件下,INFO-BSS的检测性能都要优于常规算法。展开更多
The corrosion inhibition efficacy of titanate(CaTiO_(3))for carbon anodes in molten salts was investigated through various analytical techniques,including linear sweep voltammetry,X-ray diffraction,scanning electron m...The corrosion inhibition efficacy of titanate(CaTiO_(3))for carbon anodes in molten salts was investigated through various analytical techniques,including linear sweep voltammetry,X-ray diffraction,scanning electron microscopy,and energy dispersion spectroscopy.The results demonstrate that the addition of CaTiO_(3)corrosion inhibitor efficiently passivates the carbon anode and leads to the formation of a dense CaTiO_(3)layer during the electrolysis process in molten CaCl_(2)-CaO.Subsequently,the passivated carbon anode effectively undergoes the oxygen evolution reaction,with an optimal current density for passivation identified at 400 m A/cm^(2).Comprehensive investigations,including CaTiO_(3)solubility tests in molten CaCl_(2)-CaO and numerical modeling of the stability of complex ionic structures,provide compelling evidence supporting“complexation-precipitation”passivation mechanism.This mechanism involves the initial formation of a complex containing TiO_(2)·nCaO by CaTiO_(3)and CaO,which subsequently decomposes to yield CaTiO_(3),firmly coating the surface of the carbon anode.In practical applications,the integration of CaTiO_(3)corrosion inhibitor with the carbon anode leads to the successful preparation of the FeCoNiCrMn high-entropy alloy without carbon contamination in the molten CaCl_(2)-CaO.展开更多
Binary composites(ZIF-67/rGO)were synthesized by one-step precipitation method using cobalt nitrate hexahydrate as metal source,2-methylimidazole as organic ligand,and reduced graphene oxide(rGO)as carbon carrier.Then...Binary composites(ZIF-67/rGO)were synthesized by one-step precipitation method using cobalt nitrate hexahydrate as metal source,2-methylimidazole as organic ligand,and reduced graphene oxide(rGO)as carbon carrier.Then Ru3+was introduced for ion exchange,and the porous Ru-doped Co_(3)O_(4)/rGO(Ru-Co_(3)O_(4)/rGO)composite electrocatalyst was prepared by annealing.The phase structure,morphology,and valence state of the catalyst were analyzed by X-ray powder diffraction(XRD),scanning electron microscope(SEM),transmission electron microscopy(TEM),and X-ray photoelectron spectroscopy(XPS).In 1 mol·L^(-1)KOH,the oxygen evolution reaction(OER)performance of the catalyst was measured by linear sweep voltammetry,cyclic voltammetry,and chronoamperometry.The results show that the combination of Ru doping and rGO provides a fast channel for collaborative electron transfer.At the same time,rGO as a carbon carrier can improve the electrical conductivity of Ru-Co_(3)O_(4)particles,and the uniformly dispersed nanoparticles enable the reactants to diffuse freely on the catalyst.The results showed that the electrochemical performance of Ru-Co_(3)O_(4)/rGO was much better than that of Co_(3)O_(4)/rGO,and the overpotential of Ru-Co_(3)O_(4)/rGO was 363.5 mV at the current density of 50 mA·cm^(-2).展开更多
Brazing filler metals are widely applied,which serve as an industrial adhesive in the joining of dissimilar structures.With the continuous emergence of new structures and materials,the demand for novel brazing filler ...Brazing filler metals are widely applied,which serve as an industrial adhesive in the joining of dissimilar structures.With the continuous emergence of new structures and materials,the demand for novel brazing filler metals is ever-increasing.It is of great significance to investigate the optimized composition design methods and to establish systematic design guidelines for brazing filler metals.This study elucidated the fundamental rules for the composition design of brazing filler metals from a three-dimensional perspective encompassing the basic properties of applied brazing filler metals,formability and processability,and overall cost.The basic properties of brazing filler metals refer to their mechanical properties,physicochemical properties,electromagnetic properties,corrosion resistance,and the wettability and fluidity during brazing.The formability and processability of brazing filler metals include the processes of smelting and casting,extrusion,rolling,drawing and ring-making,as well as the processes of granulation,powder production,and the molding of amorphous and microcrystalline structures.The cost of brazing filler metals corresponds to the sum of materials value and manufacturing cost.Improving the comprehensive properties of brazing filler metals requires a comprehensive and systematic consideration of design indicators.Highlighting the unique characteristics of brazing filler metals should focus on relevant technical indicators.Binary or ternary eutectic structures can effectively enhance the flow spreading ability of brazing filler metals,and solid solution structures contribute to the formability.By employing the proposed design guidelines,typical Ag based,Cu based,Zn based brazing filler metals,and Sn based solders were designed and successfully applied in major scientific and engineering projects.展开更多
The design of cost-effective and efficient metal-free carbon-based catalysts for the hydrogen evolution reaction(HER)is of great significance for increasing the production of clean hydrogen by the electrolysis of alka...The design of cost-effective and efficient metal-free carbon-based catalysts for the hydrogen evolution reaction(HER)is of great significance for increasing the production of clean hydrogen by the electrolysis of alkaline water.Precise control of the electronic structure by heteroatom doping has proven to be efficient for increasing catalytic activity.Nevertheless,both the structural characteristics and the underlying mechanism are not well understood,especially for doping with two different atoms,thus limiting the use of these catalysts.We report the production of phosphorus and nitrogen co-doped hollow carbon nanospheres(HCNs)by the copolymerization of pyrrole and aniline at a Triton X-100 micelle-interface,followed by doping with phytic acid and carbonization.The unique pore structure and defect-rich framework of the HCNs expose numerous active sites.Crucially,the combined effect of graphitic nitrogen and phosphorus-carbon bonds modulate the local electronic structure of adjacent C atoms and facilitates electron transfer.As a res-ult,the HCN carbonized at 1100°C exhibited superior HER activity and an outstanding stability(70 h at a current density of 10 mA cm^(−2))in alkaline water,because of the large number of graphitic nitrogen and phosphorus-carbon bonds.展开更多
Sulfur-doped iron-cobalt tannate nanorods(S-FeCoTA)derived from metal-organic frameworks(MOFs)as electrocatalysts were synthesized via a one-step hydrothermal method.The optimized S-FeCoTA was interlaced by loose nano...Sulfur-doped iron-cobalt tannate nanorods(S-FeCoTA)derived from metal-organic frameworks(MOFs)as electrocatalysts were synthesized via a one-step hydrothermal method.The optimized S-FeCoTA was interlaced by loose nanorods,which had many voids.The S-FeCoTA catalysts exhibited excellent electrochemical oxygen evolution reaction(OER)performance with a low overpotential of 273 mV at 10 mA·cm^(-2)and a small Tafel slope of 36 mV·dec^(-1)in 1 mol·L^(-1)KOH.The potential remained at 1.48 V(vs RHE)at 10 mA·cm^(-2)under continuous testing for 15 h,implying that S-FeCoTA had good stability.The Faraday efficiency of S-FeCoTA was 94%.The outstanding OER activity of S-FeCoTA is attributed to the synergistic effects among S,Fe,and Co,thus promoting electron transfer,reducing the reaction kinetic barrier,and enhancing the OER performance.展开更多
Several physical mechanisms of earthquake nucleation,such as pre-slip,cascade triggering,aseismic slip,and fluid-driven models,have been proposed.However,it is still not clear which model plays the most important role...Several physical mechanisms of earthquake nucleation,such as pre-slip,cascade triggering,aseismic slip,and fluid-driven models,have been proposed.However,it is still not clear which model plays the most important role in driving foreshocks and mainshock nucleation for given cases.In this study,we focus on the relationship between an intensive earthquake swarm that started beneath the Noto Peninsula in Central Japan since November 2020 and the nucleation of the 2024 M 7.6 Noto Hanto earthquake.We relocate earthquakes listed in the standard Japan Meteorological Agency(JMA)catalog since 2018 with the double-different relocation method.Relocated seismicity revealed that the 2024 M 7.6 mainshock likely ruptured a thrust fault above a parallel fault where the M 6.5 Suzu earthquake occurred in May 2023.We find possible along-strike and along-dip expansion of seismicity in the first few months at the beginning of the swarm sequence,while no obvious migration pattern in the last few days before the M 7.6 mainshock was observed.Several smaller events occurred in between the M 5.5 and M 4.6 foreshocks that occurred about 4min and 2 min before the M 7.6 mainshock.The Coulomb stress changes from the M 5.5 foreshock were negative at the hypocenter of the M 7.6 mainshock,which is inconsistent with a simple cascade triggering model.Moreover,an M 5.9 foreshock was identified in the JMA catalog 14 s before the mainshock.Results from backprojection of high-frequency teleseismic P waves show a prolonged initial rupture process near the mainshock hypocenter lasting for~25 s,before propagating bilaterally outward.Our results suggest a complex evolution process linking the earthquake swarm to the nucleation of the M 7.6 mainshock at a region of complex structures associated with the bend of a mapped large-scale reverse fault.A combination of fluid migration,aseismic slip and elastic stress triggering likely work in concert to drive both the prolonged earthquake swarm and the nucleation of the M 7.6 mainshock.展开更多
The characterization techniques were employed like transmission electron microscope,X-ray diffraction and microstructural characterization to investigate microstructural evolution and impact of precipitate-phase preci...The characterization techniques were employed like transmission electron microscope,X-ray diffraction and microstructural characterization to investigate microstructural evolution and impact of precipitate-phase precipitation on strength and toughness of a self-developed 32Si_(2)CrNi_(2)MoVNb steel during the quenching and tempering process.Research outputs indicated that the steel microstructure under the quenching state could be composed of martensite with a high dislocation density,a small amount of residual austenite,and many dispersed spherical MC carbides.In details,after tempering at 200℃,fine needle-shapedε-carbides would precipitate,which may improve yield strength and toughness of the steel.However,as compared to that after tempering at 200℃,the average length of needle-shapedε-carbides was found to increase to 144.1±4 from 134.1±3 nm after tempering at 340℃.As a result,the yield strength may increase to 1505±40 MPa,and the impact absorption energy(V-notch)may also decrease.Moreover,after tempering at 450℃,thoseε-carbides in the steel may transform into coarse rod-shaped cementite,and dislocation recoveries at such high tempering temperature may lead to decrease of strength and toughness of the steel.Finally,the following properties could be obtained:a yield strength of 1440±35 MPa,an ultimate tensile strength of 1864±50 MPa and an impact absorption energy of 45.9±4 J,by means of rational composition design and microstructural control.展开更多
基金supported by the National Key Research and Development Program of China(No.2022YFC2406000)the Guangdong Basic and Applied Basic Research Foundation(2024A1515011024)+5 种基金the Guangzhou Science and Technology Project(2024A04J4943)the Guangdong Academy of Sciences Development Special Fund Project(2022GDASZH-2022010107)the Guangdong province Science and Technology Plan Projects(2023B1212120008,2023B1212060045)the GDAS Projects of International cooperation platform of Science and Technology(2022GDASZH-2022010203-003)Special Support Foundation of Guangdong Province(2023TQ07Z559)Shenzhen Basic Research Project(JCYJ20210324120001003 and JCYJ20220531091802006)。
文摘To clarify the densification behavior,deformation response and strengthening mechanisms of selective laser melted(SLM)Mg-RE alloys,this study systematically investigates a representative WE43 alloy via advanced material characterization techniques.A suitable laser output mode fell into the transition mode,allowing for the fabrication of nearly full-density samples(porosity=0.85±0.021%)with favorable mechanical properties(yield strength=351 MPa,ultimate tensile strength=417 MPa,the elongation at break=6.5%and microhardness=137.9±6.15 HV_(0.1))using optimal processing parameters(P=80 W,v=250 mm/s and d=50μm).Viscoplastic self-consistent analysis and transmission electron microscopy observations reveal that the plastic deformation response of the SLM Mg-RE alloys is primarily driven by basal and prismatic slips.Starting from a random texture before deformation(maximum multiple of ultimate density,Max.MUD=3.95),plastic stretching led the grains to align with the Z-axis,finally resulting in a{0001}<1010>texture orientation after fracture(Max.MUD=8.755).Main phases of the SLM state are mainly composed ofα-Mg,Mg_(24)Y_(5) andβ'-Mg_(41)Nd_(5),with an average grain size of only 4.27μm(about a quarter of that in the extruded state),resulting in a favorable strength-toughness ratio.Except for the nano-β'phase and semi-coherent Mg_(24)Y_(5) phase(mismatch=16.12%)around the grain boundaries,a small amount of nano-ZrO_(2) and Y_(2)O_(3) particles also play a role in dispersion strengthening.The high mechanical properties of the SLM state are chiefly attributed to precipitation hardening(44.41%),solid solution strengthening(34.06%)and grain boundary strengthening(21.53%),with precipitation hardening being predominantly driven by dislocation strengthening(67.77%).High-performance SLM Mg-RE alloy components were manufactured and showcased at TCT Asia 2024,receiving favorable attention.This work underscores the significant application potential of SLM Mg-RE alloys and establishes a strong foundation for advancing their use in the biomedical fields.
基金supported by the National Natural Science Foundation of China[grant numbers U2142207 and U2342205]the National Key R&D Program of China[grant number 2024YFC3013100]China Meteorological Administration(CMA)Youth Innovation Team[CMA2024QN06].
文摘Since the 21st century,the Huang–Huai–Hai River Basin(HHHRB)in China has experienced increased frequency and severity of drought–flood abrupt alternation(DFAA)events during early summer,characterized by droughts in June followed by floods in July.The 2024 event was the most severe since 1981.This study demonstrates that such compound extreme events are closely linked to anomalous subseasonal evolution of large-scale atmospheric circulation.During the drought phase,the East Asian subtropical westerly jet(EAJ)shifts southward,and the western Pacific subtropical high(WPSH)exhibits anomalous strengthening with its western ridge line displaced southward.The flood phase is characterized by acceleration of the EAJ,westward extension of the WPSH,and enhanced southwestern moisture transport from the western Pacific.Beyond these typical features,the 2024 early summer circulation exhibited unique characteristics:Anomalous northeastward intensification of the WPSH facilitated merged moisture influx from both the Indian Ocean and the western Pacific along the southeast pathway into the HHHRB in July,resulting in the highest net moisture inflow at the southern boundary of the HHHRB since 1981.The synergistic effects of multiple factors primarily explain the exceptionally intense DFAA event in 2024.
基金supported by the National Natural Science Foundation of China(Nos.52075360 and 52274390)the Graduate Education Innovation Project of Shanxi Province(No.2022Y217).
文摘In this work,the phase evolution mechanism and nanomechanical properties of(CoCrNi))(82)Al_(9)Ti_(9)high-entropy alloy(HEA)prepared by selective laser melting(SLM)in the molten pool were studied.This HEA contains multiple primary elements and undergoes high-temperature gradient and rapid cooling during SLM.This leads to significant inhomogeneity of nano-scale microstructure characteristics and instability of properties.After optimizing process parameters,the microstructure evolution at the optimal parameter volume energy density of 440 J/mm^(3)was studied.A phase transition from BCC to FCC occurred in the melt micro-zone.Remelting the micro-area of the melt pool results in a temperature rise and the combustion-induced loss of Al elements.Moreover,the Ni element content increases significantly outside the melt pool.This process enhances the phase stability of FCC and facilitates phase transitions.Additionally,rapid cooling leads to the formation of distinctive ultrafine equiaxial crystals inside the melt pool,accompanied by the generation of intracrystalline needle-like nano-scale phases.Outside the melt pool,the accumulation of energy results in the formation of coarse dendrites.Therefore,the nano-hardness inside the molten pool is remarkably high at 11.79 GPa,while the outside the molten pool is reduced to 9.58 GPa.And the fracture toughness outside the melt pool also decreased.Comparing with inside the melt pool,the residual stress outside the melt pool changed from compressive to tensile stress and decreased from 603.28 to 322.84 MPa.
基金The financial support for this work from the National Natural Science Foundation of China(52274342,52130408)the Hunan Scientific Technology Projects(Grant No.2020WK2003)+1 种基金the Natural Science Foundation of Hunan Province(2021JJ40731)the Postgraduate Scientific Research Innovation Project of Hunan Province(CX20220099)is gratefully acknowledged.
文摘Typical Q235 low-carbon steel samples with different hydrogen contents(0.0004,0.0008,and 0.0013 wt.%)were prepared by adjusting the environment humidity and moisture.The effects of hydrogen on interfacial heat transfer,contact behavior,and microstructure evolution were investigated using a novel droplet solidification technique.The results revealed that when the hydrogen content increases from 0.0004 to 0.0013 wt.%,the maximum heat flux between the molten steel and cooling substrate decreases from 8.01 to 6.19 MW/m^(2),and the total heat removed in the initial 2 s reduces from 10.30 to 8.27 MJ/m^(2).Moreover,the final contact angle between the molten steel and substrate increases from 103.741°to 113.697°,and the number of pores on the droplet bottom surface increases significantly from 21 to 210 with the increase in hydrogen.The surface roughness of the droplet bottom surface increases from 20.902 to 49.181 pm.In addition,the average grain size of the droplet increases from 14.778 to 33.548 pm with the increase in the hydrogen content.The interfacial contact condition becomes worse due to the escape of hydrogen from the steel matrix during the cooling process,which leads to the reduction in the interfacial heat transfer and the increase in the grain size.
文摘Animal models have been a crucial tool in neuroscience research for decades,providing insights into the biomedical and evolutionary mechanisms of the nervous system,disease,and behavior.However,their use has raised concerns on several ethical,clinical,and scientific considerations.The welfare of animals and the 3R principles(replacement,reduction,refinement)are the focus of the ethical concerns,targeting the importance of reducing the stress and suffering of these models.Several laws and guidelines are applied and developed to protect animal rights during experimenting.Concurrently,in the clinic and biomedical fields,discussions on the relevance of animal model findings on human organisms have increased.Latest data suggest that in a considerable amount of time the animal model results are not translatable in humans,costing time and money.Alternative methods,such as in vitro(cell culture,microscopy,organoids,and micro physiological systems)techniques and in silico(computational)modeling,have emerged as potential replacements for animal models,providing more accurate data in a minimized cost.By adopting alternative methods and promoting ethical considerations in research practices,we can achieve the 3R goals while upholding our responsibility to both humans and other animals.Our goal is to present a thorough review of animal models used in neuroscience from the biomedical,evolutionary,and ethical perspectives.The novelty of this research lies in integrating diverse points of views to provide an understanding of the advantages and disadvantages of animal models in neuroscience and in discussing potential alternative methods.
基金supported by the National Natural Science Foundation of China(Nos.52022054,51974181,52004155,52004157,52374307,52304331,52334009)the National Key Research and Development Program of China(No.2022YFC2906100)+4 种基金the China Postdoctoral Science Foundation(No.2022M712023)the Science and Technology Commission of Shanghai Municipality(No.21DZ1208900)the Innovation Program of Shanghai Municipal Education Commission(No.2023ZKZD48)the Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning(No.TP2019041)the“Shuguang Program”supported by the Shanghai Education Development Foundation and the Shanghai Municipal Education Commission(No.21SG42).
文摘High/medium entropy alloys(HEAs/MEAs)with high electrocatalytic activity have attracted great attention in water electrolysis applications.However,facile synthesis of self-supporting high/medium entropy alloys electrocatalysts with rich active sites through classical metallurgical methods is still a challenge.Here,a self-supporting porous FeCoNi MEA electrocatalyst with nanosheets-shaped surface for oxygen evolution reaction(OER)was prepared by a one-step electrochemical process from the metal oxides in molten CaCl_(2).The formation of the FeCoNi MEA is attributed to the oxides electro-reduction,high-temperature diffusion and solid solution.Additionally,the morphology and structure of the FeCoNi MEA can be precisely controlled by adjusting the electrolysis time and temperature.The electronic structure regulation and the reduced energy barrier of OER from the“cocktail effect”,the abundant exposed active sites brought by surface ultrathin nanosheets,the good electronic conductivity and electrochemical stability from the self-supporting structure enable the FeCoNi MEA electrode shows high-performance OER electrocatalysis,exhibiting a low overpotential of 233 mV at a current density of 10 mA cm^(-2),a low Tafel slope of 29.8 mV dec^(-1),and an excellent stability for over 500 h without any obvious structural destruction.This work demonstrates a facile one-step electrochemical metallurgical approach for fabricating self-supporting HEAs/MEAs electrocatalysts with nanosized surface for the application in water electrolysis.
基金financially supported by the National Science Foundation of China(Nos.51974212 and 52274316)the China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202116)+1 种基金the Science and Technology Major Project of Wuhan(No.2023020302020572)the Foundation of Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education(No.FMRUlab23-04)。
文摘The utilization of iron coke provides a green pathway for low-carbon ironmaking.To uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the microstructure of iron coke was investigated.Furthermore,a comparative study of the gasification reactions between iron coke and coke was conducted through non-isothermal thermogravimetric method.The findings indicate that compared to coke,iron coke exhibits an augmentation in micropores and specific surface area,and the micropores further extend and interconnect.This provides more adsorption sites for CO_(2) molecules during the gasification process,resulting in a reduction in the initial gasification temperature of iron coke.Accelerating the heating rate in non-isothermal gasification can enhance the reactivity of iron coke.The metallic iron reduced from iron ore is embedded in the carbon matrix,reducing the orderliness of the carbon structure,which is primarily responsible for the heightened reactivity of the carbon atoms.The kinetic study indicates that the random pore model can effectively represent the gasification process of iron coke due to its rich pore structure.Moreover,as the proportion of iron ore increases,the activation energy for the carbon gasification gradually decreases,from 246.2 kJ/mol for coke to 192.5 kJ/mol for iron coke 15wt%.
基金financially supported by the National Natural Science Foundation of China(52373271)Science,Technology and Innovation Commission of Shenzhen Municipality under Grant(KCXFZ20201221173004012)+1 种基金National Key Research and Development Program of Shaanxi Province(No.2023-YBNY-271)Open Testing Foundation of the Analytical&Testing Center of Northwestern Polytechnical University(2023T019).
文摘Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching,adjusting dielectric/magnetic resonance and promoting electromagnetic(EM)wave absorption,but still exist a significant challenging in regulating local phase evolution.Herein,accordion-shaped Co/Co_(3)O_(4)@N-doped carbon nanosheets(Co/Co_(3)O_(4)@NC)with gradient magnetic heterointerfaces have been fabricated via the cooperative high-temperature carbonization and lowtemperature oxidation process.The results indicate that the surface epitaxial growth of crystal Co_(3)O_(4) domains on local Co nanoparticles realizes the adjustment of magnetic-heteroatomic components,which are beneficial for optimizing impedance matching and interfacial polarization.Moreover,gradient magnetic heterointerfaces simultaneously realize magnetic coupling,and long-range magnetic diffraction.Specifically,the synthesized Co/Co_(3)O_(4)@NC absorbents display the strong electromagnetic wave attenuation capability of−53.5 dB at a thickness of 3.0 mm with an effective absorption bandwidth of 5.36 GHz,both are superior to those of single magnetic domains embedded in carbon matrix.This design concept provides us an inspiration in optimizing interfacial polarization,regulating magnetic coupling and promoting electromagnetic wave absorption.
文摘轨道交通LTE-M(Long Term Evolution-Metro,基于轨道交通的长期演进)同频干扰检测关乎列控信号传输的可靠性,提出一种基于INFO(weIghted meaNoFvectOrs,基于向量加权平均)算法的盲源分离方法,即INFO-BSS。该方法以混合信号的最大化负熵为目标函数,用INFO优化算法替代牛顿迭代法,解决了牛顿迭代法初始参数易设置不当以及容易陷入局部最优的问题。仿真结果对比表明,在不同分辨率带宽、不同信干比等条件下,INFO-BSS的检测性能都要优于常规算法。
基金supported by the National Natural Science Foundation of China(Nos.52031008,51874211,21673162,51325102,U22B2071)the International Science and Technology Cooperation Program of China(No.2015DFA90750)the China Postdoctoral Science Foundation(No.2020M682468)。
文摘The corrosion inhibition efficacy of titanate(CaTiO_(3))for carbon anodes in molten salts was investigated through various analytical techniques,including linear sweep voltammetry,X-ray diffraction,scanning electron microscopy,and energy dispersion spectroscopy.The results demonstrate that the addition of CaTiO_(3)corrosion inhibitor efficiently passivates the carbon anode and leads to the formation of a dense CaTiO_(3)layer during the electrolysis process in molten CaCl_(2)-CaO.Subsequently,the passivated carbon anode effectively undergoes the oxygen evolution reaction,with an optimal current density for passivation identified at 400 m A/cm^(2).Comprehensive investigations,including CaTiO_(3)solubility tests in molten CaCl_(2)-CaO and numerical modeling of the stability of complex ionic structures,provide compelling evidence supporting“complexation-precipitation”passivation mechanism.This mechanism involves the initial formation of a complex containing TiO_(2)·nCaO by CaTiO_(3)and CaO,which subsequently decomposes to yield CaTiO_(3),firmly coating the surface of the carbon anode.In practical applications,the integration of CaTiO_(3)corrosion inhibitor with the carbon anode leads to the successful preparation of the FeCoNiCrMn high-entropy alloy without carbon contamination in the molten CaCl_(2)-CaO.
文摘Binary composites(ZIF-67/rGO)were synthesized by one-step precipitation method using cobalt nitrate hexahydrate as metal source,2-methylimidazole as organic ligand,and reduced graphene oxide(rGO)as carbon carrier.Then Ru3+was introduced for ion exchange,and the porous Ru-doped Co_(3)O_(4)/rGO(Ru-Co_(3)O_(4)/rGO)composite electrocatalyst was prepared by annealing.The phase structure,morphology,and valence state of the catalyst were analyzed by X-ray powder diffraction(XRD),scanning electron microscope(SEM),transmission electron microscopy(TEM),and X-ray photoelectron spectroscopy(XPS).In 1 mol·L^(-1)KOH,the oxygen evolution reaction(OER)performance of the catalyst was measured by linear sweep voltammetry,cyclic voltammetry,and chronoamperometry.The results show that the combination of Ru doping and rGO provides a fast channel for collaborative electron transfer.At the same time,rGO as a carbon carrier can improve the electrical conductivity of Ru-Co_(3)O_(4)particles,and the uniformly dispersed nanoparticles enable the reactants to diffuse freely on the catalyst.The results showed that the electrochemical performance of Ru-Co_(3)O_(4)/rGO was much better than that of Co_(3)O_(4)/rGO,and the overpotential of Ru-Co_(3)O_(4)/rGO was 363.5 mV at the current density of 50 mA·cm^(-2).
基金National Natural Science Foundation of China(U22A20191)。
文摘Brazing filler metals are widely applied,which serve as an industrial adhesive in the joining of dissimilar structures.With the continuous emergence of new structures and materials,the demand for novel brazing filler metals is ever-increasing.It is of great significance to investigate the optimized composition design methods and to establish systematic design guidelines for brazing filler metals.This study elucidated the fundamental rules for the composition design of brazing filler metals from a three-dimensional perspective encompassing the basic properties of applied brazing filler metals,formability and processability,and overall cost.The basic properties of brazing filler metals refer to their mechanical properties,physicochemical properties,electromagnetic properties,corrosion resistance,and the wettability and fluidity during brazing.The formability and processability of brazing filler metals include the processes of smelting and casting,extrusion,rolling,drawing and ring-making,as well as the processes of granulation,powder production,and the molding of amorphous and microcrystalline structures.The cost of brazing filler metals corresponds to the sum of materials value and manufacturing cost.Improving the comprehensive properties of brazing filler metals requires a comprehensive and systematic consideration of design indicators.Highlighting the unique characteristics of brazing filler metals should focus on relevant technical indicators.Binary or ternary eutectic structures can effectively enhance the flow spreading ability of brazing filler metals,and solid solution structures contribute to the formability.By employing the proposed design guidelines,typical Ag based,Cu based,Zn based brazing filler metals,and Sn based solders were designed and successfully applied in major scientific and engineering projects.
基金financially supported by the project of the National Natural Science Foundation of China(52322203)the Key Research and Development Program of Shaanxi Province(2024GHZDXM-21)。
文摘The design of cost-effective and efficient metal-free carbon-based catalysts for the hydrogen evolution reaction(HER)is of great significance for increasing the production of clean hydrogen by the electrolysis of alkaline water.Precise control of the electronic structure by heteroatom doping has proven to be efficient for increasing catalytic activity.Nevertheless,both the structural characteristics and the underlying mechanism are not well understood,especially for doping with two different atoms,thus limiting the use of these catalysts.We report the production of phosphorus and nitrogen co-doped hollow carbon nanospheres(HCNs)by the copolymerization of pyrrole and aniline at a Triton X-100 micelle-interface,followed by doping with phytic acid and carbonization.The unique pore structure and defect-rich framework of the HCNs expose numerous active sites.Crucially,the combined effect of graphitic nitrogen and phosphorus-carbon bonds modulate the local electronic structure of adjacent C atoms and facilitates electron transfer.As a res-ult,the HCN carbonized at 1100°C exhibited superior HER activity and an outstanding stability(70 h at a current density of 10 mA cm^(−2))in alkaline water,because of the large number of graphitic nitrogen and phosphorus-carbon bonds.
文摘Sulfur-doped iron-cobalt tannate nanorods(S-FeCoTA)derived from metal-organic frameworks(MOFs)as electrocatalysts were synthesized via a one-step hydrothermal method.The optimized S-FeCoTA was interlaced by loose nanorods,which had many voids.The S-FeCoTA catalysts exhibited excellent electrochemical oxygen evolution reaction(OER)performance with a low overpotential of 273 mV at 10 mA·cm^(-2)and a small Tafel slope of 36 mV·dec^(-1)in 1 mol·L^(-1)KOH.The potential remained at 1.48 V(vs RHE)at 10 mA·cm^(-2)under continuous testing for 15 h,implying that S-FeCoTA had good stability.The Faraday efficiency of S-FeCoTA was 94%.The outstanding OER activity of S-FeCoTA is attributed to the synergistic effects among S,Fe,and Co,thus promoting electron transfer,reducing the reaction kinetic barrier,and enhancing the OER performance.
基金partially supported by U.S.National Science Foundation grants EAR1925965 and RISE-2425889support from the European Research Council under the European Union Horizon 2020 research and innovation program(grant agreement no.742335,FIMAGE)。
文摘Several physical mechanisms of earthquake nucleation,such as pre-slip,cascade triggering,aseismic slip,and fluid-driven models,have been proposed.However,it is still not clear which model plays the most important role in driving foreshocks and mainshock nucleation for given cases.In this study,we focus on the relationship between an intensive earthquake swarm that started beneath the Noto Peninsula in Central Japan since November 2020 and the nucleation of the 2024 M 7.6 Noto Hanto earthquake.We relocate earthquakes listed in the standard Japan Meteorological Agency(JMA)catalog since 2018 with the double-different relocation method.Relocated seismicity revealed that the 2024 M 7.6 mainshock likely ruptured a thrust fault above a parallel fault where the M 6.5 Suzu earthquake occurred in May 2023.We find possible along-strike and along-dip expansion of seismicity in the first few months at the beginning of the swarm sequence,while no obvious migration pattern in the last few days before the M 7.6 mainshock was observed.Several smaller events occurred in between the M 5.5 and M 4.6 foreshocks that occurred about 4min and 2 min before the M 7.6 mainshock.The Coulomb stress changes from the M 5.5 foreshock were negative at the hypocenter of the M 7.6 mainshock,which is inconsistent with a simple cascade triggering model.Moreover,an M 5.9 foreshock was identified in the JMA catalog 14 s before the mainshock.Results from backprojection of high-frequency teleseismic P waves show a prolonged initial rupture process near the mainshock hypocenter lasting for~25 s,before propagating bilaterally outward.Our results suggest a complex evolution process linking the earthquake swarm to the nucleation of the M 7.6 mainshock at a region of complex structures associated with the bend of a mapped large-scale reverse fault.A combination of fluid migration,aseismic slip and elastic stress triggering likely work in concert to drive both the prolonged earthquake swarm and the nucleation of the M 7.6 mainshock.
基金the National Natural Science Foundation of China(Key Program)(52031004).
文摘The characterization techniques were employed like transmission electron microscope,X-ray diffraction and microstructural characterization to investigate microstructural evolution and impact of precipitate-phase precipitation on strength and toughness of a self-developed 32Si_(2)CrNi_(2)MoVNb steel during the quenching and tempering process.Research outputs indicated that the steel microstructure under the quenching state could be composed of martensite with a high dislocation density,a small amount of residual austenite,and many dispersed spherical MC carbides.In details,after tempering at 200℃,fine needle-shapedε-carbides would precipitate,which may improve yield strength and toughness of the steel.However,as compared to that after tempering at 200℃,the average length of needle-shapedε-carbides was found to increase to 144.1±4 from 134.1±3 nm after tempering at 340℃.As a result,the yield strength may increase to 1505±40 MPa,and the impact absorption energy(V-notch)may also decrease.Moreover,after tempering at 450℃,thoseε-carbides in the steel may transform into coarse rod-shaped cementite,and dislocation recoveries at such high tempering temperature may lead to decrease of strength and toughness of the steel.Finally,the following properties could be obtained:a yield strength of 1440±35 MPa,an ultimate tensile strength of 1864±50 MPa and an impact absorption energy of 45.9±4 J,by means of rational composition design and microstructural control.
