The harmful algal bloom primarily caused by Microcystis aeruginosa(M.aeruginosa)has become one of the serious biological pollution issues in actual water,which has received intense attention worldwide.Over the past ye...The harmful algal bloom primarily caused by Microcystis aeruginosa(M.aeruginosa)has become one of the serious biological pollution issues in actual water,which has received intense attention worldwide.Over the past years,increasing number of publications have reported that metal-organic frameworks(MOFs)based functional materials exhibited significant inhibition against M.aeruginosa via multiple mechanisms,but no review papers systematically presented progresses regarding MOFs-based materials for M.aeruginosa control up to now.With this review paper,we summarized the state-of-the-art studies of MOFsbased materials for M.aeruginosa removal,comparing and discussing the design strategies of MOFs-based materials and their antimicrobial mechanisms.Meanwhile,we discussed methods for evaluating the water purification performances of MOFs-based materials against M.aeruginosa.Finally,the perspectives for design of novel MOFs-based functional materials and application scenarios were proposed to provide an outlook on areas where greater efforts should be made in the future.展开更多
The formation water sample in oil and gas fields may be polluted in processes of testing, trial production, collection, storage, transportation and analysis, making the properties of formation water not be reflected t...The formation water sample in oil and gas fields may be polluted in processes of testing, trial production, collection, storage, transportation and analysis, making the properties of formation water not be reflected truly. This paper discusses identification methods and the data credibility evaluation method for formation water in oil and gas fields of petroliferous basins within China. The results of the study show that: (1) the identification methods of formation water include the basic methods of single factors such as physical characteristics, water composition characteristics, water type characteristics, and characteristic coefficients, as well as the comprehensive evaluation method of data credibility proposed on this basis, which mainly relies on the correlation analysis sodium chloride coefficient and desulfurization coefficient and combines geological background evaluation;(2) The basic identifying methods for formation water enable the preliminary identification of hydrochemical data and the preliminary screening of data on site, the proposed comprehensive method realizes the evaluation by classifying the CaCl2-type water into types A-I to A-VI and the NaHCO3-type water into types B-I to B-IV, so that researchers can make in-depth evaluation on the credibility of hydrochemical data and analysis of influencing factors;(3) When the basic methods are used to identify the formation water, the formation water containing anions such as CO_(3)^(2-), OH- and NO_(3)^(-), or the formation water with the sodium chloride coefficient and desulphurization coefficient not matching the geological setting, are all invaded with surface water or polluted by working fluid;(4) When the comprehensive method is used, the data credibility of A-I, A-II, B-I and B-II formation water can be evaluated effectively and accurately only if the geological setting analysis in respect of the factors such as formation environment, sampling conditions, condensate water, acid fluid, leaching of ancient weathering crust, and ancient atmospheric fresh water, is combined, although such formation water is believed with high credibility.展开更多
Algorithms are the primary component of Artificial Intelligence(AI).The algorithm is the process in AI that imitates the human mind to solve problems.Currently evaluating the performance of AI is achieved by evaluatin...Algorithms are the primary component of Artificial Intelligence(AI).The algorithm is the process in AI that imitates the human mind to solve problems.Currently evaluating the performance of AI is achieved by evaluating AI algorithms by metric scores on data sets.However the evaluation of algorithms in AI is challenging because the evaluation of the same type of algorithm has many data sets and evaluation metrics.Different algorithms may have individual strengths and weaknesses in evaluation metric scores on separate data sets,lacking the credibility and validity of the evaluation.Moreover,evaluation of algorithms requires repeated experiments on different data sets,reducing the attention of researchers to the research of the algorithms itself.Crucially,this approach to evaluating comparative metric scores does not take into account the algorithm’s ability to solve problems.And the classical algorithm evaluation of time and space complexity is not suitable for evaluating AI algorithms.Because classical algorithms input is infinite numbers,whereas AI algorithms input is a data set,which is limited and multifarious.According to the AI algorithm evaluation without response to the problem solving capability,this paper summarizes the features of AI algorithm evaluation and proposes an AI evaluation method that incorporates the problem-solving capabilities of algorithms.展开更多
[Objectives]The paper was to screen new varieties of long cowpea that are suitable for autumn cultivation in Hunan,as well as to develop a comprehensive evaluation method to assess their adaptability and performance.[...[Objectives]The paper was to screen new varieties of long cowpea that are suitable for autumn cultivation in Hunan,as well as to develop a comprehensive evaluation method to assess their adaptability and performance.[Methods]A total of 48 long cowpea varieties were introduced,and a range of comprehensive evaluation methods was employed to assess these varieties through the collection and analysis of field data.[Results]The square Euclidean distance of 14 allowed for the classification of all varieties into eight distinct groups.Groups II,III,and V belong to the autumn dominant group within this region,while groups I and VIII belong to the intermediate group.Additionally,groups IV,VI,and VII belong to the autumn inferior group in this area.Through a comparative analysis of various comprehensive evaluation methods,it was determined that the common factor comprehensive evaluation,grey correlation method,and fuzzy evaluation method were appropriate for application in the selection of long cowpea varieties.Furthermore,the evaluation outcomes were largely consistent with the cluster pedigree diagram.[Conclusions]Through comprehensive index method,ten varieties demonstrating superior performance in autumn cultivation have been identified,including C20,C42,C29,C40,C3,C14,C18,C25,C15,and C47.The selected varieties exhibit several advantageous traits,such as a reduced growth duration,a lower position of initial flower nodes,a decreased number of branches,predominantly green young pods,elongated pod strips,thicker pod structures,an increased number of pods per plant,and higher overall yields.These characteristics render them particularly valuable for extensive cultivation.展开更多
As China continues to develop its ecological civilization,it is crucial to quantitatively assess the ecological value to understand its potential impact on regional sustainable development.While previous studies have ...As China continues to develop its ecological civilization,it is crucial to quantitatively assess the ecological value to understand its potential impact on regional sustainable development.While previous studies have highlighted the importance of ecological value,they have not fully reflected the value of ecological restoration work or considered social costs and benefits,lacking a people-centered approach.Hence,this study analyzes the essence of ecological value from the perspective of sustainable development.By studying emblematic ecological restoration areas such as the Saihanba Mechanized Forest Farm in Chengde City,it aims to identify the significance of ecological restoration efforts in enhancing regional sustainable development capacity.The results underscore the necessity of comprehensively considering the value chain from ecological construction to ecological output,highlighting the value of ecological restoration in the ecological construction process as well as the well-being of people in the ecological output process.This approach assigns more economic and humanistic attributes to ecological value,thereby better serving the development of ecological restoration areas.展开更多
[Objective] This study was to provide references for the evaluation of water quality in aquaculture ponds by evaluating the pond water quality using fuzzy comprehensive evaluation method based on entropy weight. [Meth...[Objective] This study was to provide references for the evaluation of water quality in aquaculture ponds by evaluating the pond water quality using fuzzy comprehensive evaluation method based on entropy weight. [Method] The fuzzy compre- hensive evaluation method based on entropy weight was used to evaluate the water quality in the ponds with Ukraine scale carp （Cyprinus carpio） as the main cultivated fish. The average size of the fish was 71.4 g/ind, and totally three groups of pond were set with the population density of 6 000, 9 000, 12 000 ind/hm2. [Result] According to the GB3838-2002 Environmental Quality Standards for Surface Water of China, the water quality of 6 000 ind/hm2 group was Grade I, and the water quality of 9 000 and 12 000 ind/hm2 were Grade V. [Conclusion] With the increasing of feeding density, the pond water quality would worsen, however, there is no difference on water quality between 9 000 and 12 000 ind/hm2 groups.展开更多
In the process of designing self-elevating drilling unit, it is important, yet complicated, to use comparison and filtering to select the optimum scheme from the feasible ones. In this research, an index system and me...In the process of designing self-elevating drilling unit, it is important, yet complicated, to use comparison and filtering to select the optimum scheme from the feasible ones. In this research, an index system and methodology for the evaluation of self-elevating drilling unit was proposed. Based on this, a multi-objective combinatorial optimization model was developed, using the improved grey relation Analysis （GRA）, in which the analytic hierarchy process （AHP） was used to determine the weights of the evaluating indices. It considered the connections within the indices, reflecting the objective nature of things, and also considered the subjective interests of ship owners and the needs of designers. The evaluation index system and evaluation method can be used in the selection of an optimal scheme and advanced assessment. A case study shows the index system and evaluation method are scientific, reasonable, and easy to put into practice. At the same time, such an evaluation index system and evaluation method will be helpful for making decisions for other mobile platforms.展开更多
Actual sea condition testing and inspection and evaluation method research are carried out for tidal energy devices to provide scientific and effective technical support for the ocean high-tech achievement transformat...Actual sea condition testing and inspection and evaluation method research are carried out for tidal energy devices to provide scientific and effective technical support for the ocean high-tech achievement transformation and marine renewable energy development. By analyzing three core indicators, including the power output characteristics of the tidal current device, the generating capacity, energy conversion efficiency, proposed the test contents and evaluation methods of indicators are proposed in this paper; and based on the research of wind farms, power quality testing and assessment methods of offshore tidal energy device are proposed; given the security access to the test contents of tidal current energy device, tidal current energy device running conditions in the testing ground are comprehensively assessed.展开更多
The deformation characteristic of bland in deep drawing is discussed. It is pointed out that the friction and lubrication conditions in for drawing are different from that in mechanical motion or machine work or other...The deformation characteristic of bland in deep drawing is discussed. It is pointed out that the friction and lubrication conditions in for drawing are different from that in mechanical motion or machine work or other plastic process. The common test methods in laboratories are analyzed. It shows that though all those test methods can test the friction coefficient, the probe test method is most suitable for the research of friction and lubrication and the process in deep drawing, for this method is identical with the actual work condition either from the test principle or deformation status of the blank. Last the successful application in the deep drawing simulator newly developed the the probe method are intro- duced in detail.展开更多
The existing researches of the evaluation method of ride comfort of vehicle mainly focus on the level of human feelings to vibration. The level of human feelings to vibration is influenced by many factors, however, th...The existing researches of the evaluation method of ride comfort of vehicle mainly focus on the level of human feelings to vibration. The level of human feelings to vibration is influenced by many factors, however, the ride comfort according to the common principle of probability and statistics and simple binary logic is tmable to reflect these uncertainties. The random fuzzy evaluation model from people subjective response to vibration is adopted in the paper, these uncertainties are analyzed from the angle of psychological physics. Discussing the traditional evaluation of ride comfort during vehicle vibration, a fuzzily random evaluation model on the basis of annoyance rate is proposed for the human body＇s subjective response to vibration, with relevant fuzzy membership function and probability distribution given. A half-car four degrees of freedom suspension vibration model is described, subject to irregular excitations from the road surface, with the aid of software Matlab/Simulink. A new kind of evaluation method for ride comfort of vehicles is proposed in the paper, i.e., the annoyance rate evaluation method. The genetic algorithm and neural network control theory are used to control the system. Simulation results are obtained, such as the comparison of comfort reaction to vibration environments between before and after control, relationship of annoyance rate to vibration frequency and weighted acceleration, based on ISO 2631 / 1 （1982）, ISO 2631-1 （1997） and annoyance rate evaluation method, respectively. Simulated assessment results indicate that the proposed active suspension systems prove to be effective in the vibration isolation of the suspension system, and the subjective response of human being can be promoted from very uncomfortable to a little uncomfortable. Furthermore, the novel evaluation method based on annoyance rate can further estimate quantitatively the number of passengers who feel discomfort due to vibration. A new analysis method of vehicle comfort is presented.展开更多
Internal erosion occurs when fine particles escape from the soil driven by seepage flow,which is considered to be the crucial factor causing the failure of earth structures filled with gravelly soil.The objective of t...Internal erosion occurs when fine particles escape from the soil driven by seepage flow,which is considered to be the crucial factor causing the failure of earth structures filled with gravelly soil.The objective of this paper is to suggest an appropriate method to assess internal erosion potential of gravelly soil.By analyzing the sensitivity of soil material to internal erosion,the variable(Dc15/df85)max and the content of coarse particles(Pc)are selected as the evaluation indexes(Dc15 and df85 are the diameters of 15%mass passing in the coarse component and 85%mass passing in the fine component,respectively).A series of gravelly soils with different particle size distributions are tested for internal erosion by the self-made permeameter.Based on the test results,an evaluation method for the internal erosion of gravelly soil is proposed.Gravelly soil is prone to internal erosion when 60%≤Pc<95%and(Dc15/df85)max≥9.5.The proposed method shows good accuracy in evaluating the internal erosion of 36 soil samples from other studies,which confirms the reliability of the method.The proposed method makes it possible to accurately assess internal erosion of gravelly soil,and an alternative method is provided for engineers to determine whether there is a risk of internal erosion in earth structures consisting of gravelly soil.展开更多
Taking a high-speed train in China as an example,using computer simulation technology and comparing with the test data,the three current methods including linear stability analysis method,nonlinear stability analysis ...Taking a high-speed train in China as an example,using computer simulation technology and comparing with the test data,the three current methods including linear stability analysis method,nonlinear stability analysis method and the field testing criterion are studied to evaluate stability of high-speed trains.A new stability evaluation method is proposed which can be used to evaluate lateral stability of high-speed vehicle based on the codes of UIC 515and UIC 518.From the viewpoint of taking the most unfavorable track conditions into account and improving the safety margin,the new method uses the root mean square of bogie lateral acceleration as a criterion to evaluate the lateral stability of high-speed trains.Numerical example shows that the proposed method not only considers the forced vibration caused by track irregularities in the actual practice,but also takes the instability self-excited vibration into account,so it can realize early warning of bogie slight unstable oscillation,meanwhile the method itself does not involve complex algorithms which has the possibility of engineering applications.展开更多
The fuzzy integration evaluation method （FIEM） is studied in order to select the best orbital elements from the multi-group initial orbits determined by a satellite TT＆C （Tracking, Telemetry and Control） center w...The fuzzy integration evaluation method （FIEM） is studied in order to select the best orbital elements from the multi-group initial orbits determined by a satellite TT＆C （Tracking, Telemetry and Control） center with all kinds of data sources. By employing FIEM together with the experience of TT＆C experts, the index system to evaluate the selection of the best initial orbits is established after the data sources and orbit determination theories are studied. Besides, the concrete steps in employing the method are presented. Moreover, by taking the objects to be evaluated as evaluation experts, the problem of how to generate evaluation matrices is solved. Through practical application, the method to select the best initial orbital elements has been proved to be flexible and effective The originality of the method is to find a new evaluation criterion （comparing the actually tracked orbits） replacing the traditional one （comparing the nominal orbits） for selecting the best orbital elements.展开更多
Helicopter plays an increasingly significant role in Maritime Search and Rescue(MSAR),and it will perform MSAR mission based on response plans when an accident occurs.Thus the rationality of response plan determines t...Helicopter plays an increasingly significant role in Maritime Search and Rescue(MSAR),and it will perform MSAR mission based on response plans when an accident occurs.Thus the rationality of response plan determines the success of MSAR mission to a large extent.However,with the impact of many uncertainty factors,it is difficult to evaluate response plans comprehensively before performing them.Aiming at these problems,an evaluation framework of helicopter MSAR response plan named UMAD is proposed in this paper,which reveals the influence mechanism of uncertainty factors based on Multi-Agent method and analyzes the mission flow based on Discrete Event System(DEVS)method.Furthermore,the evaluation criterion and indicators of response plan are extracted from the aspects of safety and effectiveness.Meanwhile,the Monte Carlo method is adapted to calculate the probability distribution and robustness of response plan comprehensive result.Finally,in order to illustrate the validity of this method,it is discussed and verified by an application example of evaluating multiple response plans to the same MSAR scenario.The results show that this method can analyze the influence of uncertainty more systematically and optimize response plans more comprehensively.展开更多
China vigorously is carrying out the construction of green building and ecological city during " The 12 th five-Year plan". Now,although the identification system of design and operation have been implemente...China vigorously is carrying out the construction of green building and ecological city during " The 12 th five-Year plan". Now,although the identification system of design and operation have been implemented in the evaluation of green building,lacking of appropriate evaluation after use. The actual operation results of many buildings,which have got a green building logo,are not satisfied from the user 's perspective. In this paper,an evaluation method that combines the actual building energy consumption and users' satisfaction has been discussed,based on the post occupancy evaluation( POE) theory and the Big data technology. Through the comparison and analysis of building objective operational metrics and users subjective feelings indicators,the green buildings' POE has been achieved. Finally,the study analyzes the assessed value of green building's POE from the three-time dimensions,short-term,medium-term and long-term. And the outlook of the direction is looking forward to the follow-up study.展开更多
The cracking behavior of lightweight aggregate concrete(LWAC) was investigated by mechanical analysis, SEM and cracking-resistant test where a shrinkage-restrained ring with a clapboard was used. The relationship betw...The cracking behavior of lightweight aggregate concrete(LWAC) was investigated by mechanical analysis, SEM and cracking-resistant test where a shrinkage-restrained ring with a clapboard was used. The relationship between the ceramsite type and the cracking resistance of LWAC was built up and compared with that of normal-weight coarse aggregate concrete(NWAC). A new method was proposed to evaluate the cracking resistance of concrete, where the concepts of cracking coefficient ζt(t) and the evaluation index Acr(t) were proposed, and the development of micro-cracks and damage accumulation were recognized. For the concrete with an ascending cracking coefficient curve, the larger Acr(t) is, the lower cracking resistance of concrete is. For the concrete with a descending cracking coefficient curve, the larger Acr(t) is, the stronger the cracking resistance of concrete is. The evaluation results show that in the case of that all the three types of coarse aggregates in concrete are pre-soaked for 24 h, NWAC has the lowest cracking resistance, followed by the LWAC with lower water absorption capacity ceramsite and the LWAC with higher water absorption capacity ceramsite has the strongest cracking resistance. The proposed method has obvious advantages over the cracking age method, because it can evaluate the cracking behavior of concrete even if the concrete has not an observable crack.展开更多
This paper firstly introduced the degree of livability of a city from the social civilization,economic affluence,environmental beauty,resource carrying capacity,and life convenience. Based on the principle of the fuzz...This paper firstly introduced the degree of livability of a city from the social civilization,economic affluence,environmental beauty,resource carrying capacity,and life convenience. Based on the principle of the fuzzy comprehensive evaluation,it analyzed the connection between influencing factors,and established a comprehensive evaluation model for calculation of the livability index of a city. Finally,it obtained the relative livability of each city and the ranking of livability of each city.展开更多
Quantitative level evaluation of cold-rolled strip was significant for the shape control and the product structure optimization. Based on the probability statistics method and the shape pattern recognition method, the...Quantitative level evaluation of cold-rolled strip was significant for the shape control and the product structure optimization. Based on the probability statistics method and the shape pattern recognition method, the shape evaluation model of cold-rolled strip was established to evaluate real-time shape of the online strip. The model was embedded in the shape control system, and the online strip shape state was real-time observed whether to meet the technical indicators, so the shape level could be identified and evaluated. Based on the shape evaluation indicators, the shape component could be well controlled to improve the shape hit rate and the control stability, so that the rolled strip shape could meet the technical requirements. At a 1050 cold strip mill, the shape data of the scene typical specifications strip were online collected and real-time evaluated, and the hit of macro shape in less than 8 I was 68.44%, indicating that the mill shape control had considerable room for improvement, as well as the evaluation method was feasible and practical for quantitative evaluation of the strip shape. So the new evaluation model has important guiding significance to increase value-added and reduce product quality objection.展开更多
3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evalu...3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evaluating for C/Ph composite and Duralumin,the 2D evaluation method of the cutting surface topography of C/Ph composite loses a lot of information,the characteristics of the surface topography of C/Ph composite can be comprehensively and authentically evaluated only by 3D evaluation method.Furthermore,3D amplitude and spatial parameters were adopted to evaluate the surface.The results show that： the topography of the C/Ph composite is anisotropic,there are more valleys in the machined surface of C/Ph than that of duralumin,and there are not obvious feeding textures for C/Ph,which indicates the machining mechanism is different from the metal.In conclusion,the topography of the C/Ph composite cutting surface is anisotropic;the cutting surface of C/Ph composite needs 3D evaluation method.展开更多
Fuzzy comprehensive evaluation method was used to develop a standard model to analyze and evaluate nearness degree of water environment quality at breeding area of Shuidong Bay in China.Results showed that certain env...Fuzzy comprehensive evaluation method was used to develop a standard model to analyze and evaluate nearness degree of water environment quality at breeding area of Shuidong Bay in China.Results showed that certain environment contamination factors in some areas seriously exceeded the standard value and led to the whole water quality at the third class level.The measurements should be taken to promote the sustainable development of breeding area in Shuidong Bay.展开更多
基金supported by National Natural Science Foundation of China(Nos.22176012,52370025)the Pyramid Talent Training Project of Beijing University of Civil Engineering and Architecture(No.JDLJ20220802)+1 种基金the Doctor Graduate Scientific Research Ability Improvement Project of Beijing University of Civil Engineering and Architecture(No.DG2023014)Guangxi Key Laboratory of Urban Water Environment。
文摘The harmful algal bloom primarily caused by Microcystis aeruginosa(M.aeruginosa)has become one of the serious biological pollution issues in actual water,which has received intense attention worldwide.Over the past years,increasing number of publications have reported that metal-organic frameworks(MOFs)based functional materials exhibited significant inhibition against M.aeruginosa via multiple mechanisms,but no review papers systematically presented progresses regarding MOFs-based materials for M.aeruginosa control up to now.With this review paper,we summarized the state-of-the-art studies of MOFsbased materials for M.aeruginosa removal,comparing and discussing the design strategies of MOFs-based materials and their antimicrobial mechanisms.Meanwhile,we discussed methods for evaluating the water purification performances of MOFs-based materials against M.aeruginosa.Finally,the perspectives for design of novel MOFs-based functional materials and application scenarios were proposed to provide an outlook on areas where greater efforts should be made in the future.
基金Supported by the PetroChina Science and Technology Project(2023ZZ0202)。
文摘The formation water sample in oil and gas fields may be polluted in processes of testing, trial production, collection, storage, transportation and analysis, making the properties of formation water not be reflected truly. This paper discusses identification methods and the data credibility evaluation method for formation water in oil and gas fields of petroliferous basins within China. The results of the study show that: (1) the identification methods of formation water include the basic methods of single factors such as physical characteristics, water composition characteristics, water type characteristics, and characteristic coefficients, as well as the comprehensive evaluation method of data credibility proposed on this basis, which mainly relies on the correlation analysis sodium chloride coefficient and desulfurization coefficient and combines geological background evaluation;(2) The basic identifying methods for formation water enable the preliminary identification of hydrochemical data and the preliminary screening of data on site, the proposed comprehensive method realizes the evaluation by classifying the CaCl2-type water into types A-I to A-VI and the NaHCO3-type water into types B-I to B-IV, so that researchers can make in-depth evaluation on the credibility of hydrochemical data and analysis of influencing factors;(3) When the basic methods are used to identify the formation water, the formation water containing anions such as CO_(3)^(2-), OH- and NO_(3)^(-), or the formation water with the sodium chloride coefficient and desulphurization coefficient not matching the geological setting, are all invaded with surface water or polluted by working fluid;(4) When the comprehensive method is used, the data credibility of A-I, A-II, B-I and B-II formation water can be evaluated effectively and accurately only if the geological setting analysis in respect of the factors such as formation environment, sampling conditions, condensate water, acid fluid, leaching of ancient weathering crust, and ancient atmospheric fresh water, is combined, although such formation water is believed with high credibility.
基金funded by the General Program of the National Natural Science Foundation of China grant number[62277022].
文摘Algorithms are the primary component of Artificial Intelligence(AI).The algorithm is the process in AI that imitates the human mind to solve problems.Currently evaluating the performance of AI is achieved by evaluating AI algorithms by metric scores on data sets.However the evaluation of algorithms in AI is challenging because the evaluation of the same type of algorithm has many data sets and evaluation metrics.Different algorithms may have individual strengths and weaknesses in evaluation metric scores on separate data sets,lacking the credibility and validity of the evaluation.Moreover,evaluation of algorithms requires repeated experiments on different data sets,reducing the attention of researchers to the research of the algorithms itself.Crucially,this approach to evaluating comparative metric scores does not take into account the algorithm’s ability to solve problems.And the classical algorithm evaluation of time and space complexity is not suitable for evaluating AI algorithms.Because classical algorithms input is infinite numbers,whereas AI algorithms input is a data set,which is limited and multifarious.According to the AI algorithm evaluation without response to the problem solving capability,this paper summarizes the features of AI algorithm evaluation and proposes an AI evaluation method that incorporates the problem-solving capabilities of algorithms.
基金Supported by China Agricultural Industry Research System(CARS-23-G31)Technology Innovation Guidance Project of Changde City(CDKJJ20220265,CDKJJ2023YF33).
文摘[Objectives]The paper was to screen new varieties of long cowpea that are suitable for autumn cultivation in Hunan,as well as to develop a comprehensive evaluation method to assess their adaptability and performance.[Methods]A total of 48 long cowpea varieties were introduced,and a range of comprehensive evaluation methods was employed to assess these varieties through the collection and analysis of field data.[Results]The square Euclidean distance of 14 allowed for the classification of all varieties into eight distinct groups.Groups II,III,and V belong to the autumn dominant group within this region,while groups I and VIII belong to the intermediate group.Additionally,groups IV,VI,and VII belong to the autumn inferior group in this area.Through a comparative analysis of various comprehensive evaluation methods,it was determined that the common factor comprehensive evaluation,grey correlation method,and fuzzy evaluation method were appropriate for application in the selection of long cowpea varieties.Furthermore,the evaluation outcomes were largely consistent with the cluster pedigree diagram.[Conclusions]Through comprehensive index method,ten varieties demonstrating superior performance in autumn cultivation have been identified,including C20,C42,C29,C40,C3,C14,C18,C25,C15,and C47.The selected varieties exhibit several advantageous traits,such as a reduced growth duration,a lower position of initial flower nodes,a decreased number of branches,predominantly green young pods,elongated pod strips,thicker pod structures,an increased number of pods per plant,and higher overall yields.These characteristics render them particularly valuable for extensive cultivation.
基金supported by the National Key Research and Development Program of China under the theme“Research on the evaluation methods and standards of urban sustainable development” [Grant No.2022YFC3802901]Central Public-Interest Scientific Institution Basal Research Fund,CNIS“Research on the implementation of ISO 37101 for Sustainable cities and communities in China” [Grant No.512024Y-11450].
文摘As China continues to develop its ecological civilization,it is crucial to quantitatively assess the ecological value to understand its potential impact on regional sustainable development.While previous studies have highlighted the importance of ecological value,they have not fully reflected the value of ecological restoration work or considered social costs and benefits,lacking a people-centered approach.Hence,this study analyzes the essence of ecological value from the perspective of sustainable development.By studying emblematic ecological restoration areas such as the Saihanba Mechanized Forest Farm in Chengde City,it aims to identify the significance of ecological restoration efforts in enhancing regional sustainable development capacity.The results underscore the necessity of comprehensively considering the value chain from ecological construction to ecological output,highlighting the value of ecological restoration in the ecological construction process as well as the well-being of people in the ecological output process.This approach assigns more economic and humanistic attributes to ecological value,thereby better serving the development of ecological restoration areas.
基金Supported by the Major Project of Application Foundation and Advanced Technology of Tianjin (the Natural Science Foundation of Tianjin) (09JCZDJC19200),China~~
文摘[Objective] This study was to provide references for the evaluation of water quality in aquaculture ponds by evaluating the pond water quality using fuzzy comprehensive evaluation method based on entropy weight. [Method] The fuzzy compre- hensive evaluation method based on entropy weight was used to evaluate the water quality in the ponds with Ukraine scale carp （Cyprinus carpio） as the main cultivated fish. The average size of the fish was 71.4 g/ind, and totally three groups of pond were set with the population density of 6 000, 9 000, 12 000 ind/hm2. [Result] According to the GB3838-2002 Environmental Quality Standards for Surface Water of China, the water quality of 6 000 ind/hm2 group was Grade I, and the water quality of 9 000 and 12 000 ind/hm2 were Grade V. [Conclusion] With the increasing of feeding density, the pond water quality would worsen, however, there is no difference on water quality between 9 000 and 12 000 ind/hm2 groups.
基金Supported by the National 863 Plan Foundation under Grant No.2003AA414060
文摘In the process of designing self-elevating drilling unit, it is important, yet complicated, to use comparison and filtering to select the optimum scheme from the feasible ones. In this research, an index system and methodology for the evaluation of self-elevating drilling unit was proposed. Based on this, a multi-objective combinatorial optimization model was developed, using the improved grey relation Analysis （GRA）, in which the analytic hierarchy process （AHP） was used to determine the weights of the evaluating indices. It considered the connections within the indices, reflecting the objective nature of things, and also considered the subjective interests of ship owners and the needs of designers. The evaluation index system and evaluation method can be used in the selection of an optimal scheme and advanced assessment. A case study shows the index system and evaluation method are scientific, reasonable, and easy to put into practice. At the same time, such an evaluation index system and evaluation method will be helpful for making decisions for other mobile platforms.
基金supported by the Implementation Programs for Marine Renewable Energy Special Funds (GHME2012ZC02)
文摘Actual sea condition testing and inspection and evaluation method research are carried out for tidal energy devices to provide scientific and effective technical support for the ocean high-tech achievement transformation and marine renewable energy development. By analyzing three core indicators, including the power output characteristics of the tidal current device, the generating capacity, energy conversion efficiency, proposed the test contents and evaluation methods of indicators are proposed in this paper; and based on the research of wind farms, power quality testing and assessment methods of offshore tidal energy device are proposed; given the security access to the test contents of tidal current energy device, tidal current energy device running conditions in the testing ground are comprehensively assessed.
文摘The deformation characteristic of bland in deep drawing is discussed. It is pointed out that the friction and lubrication conditions in for drawing are different from that in mechanical motion or machine work or other plastic process. The common test methods in laboratories are analyzed. It shows that though all those test methods can test the friction coefficient, the probe test method is most suitable for the research of friction and lubrication and the process in deep drawing, for this method is identical with the actual work condition either from the test principle or deformation status of the blank. Last the successful application in the deep drawing simulator newly developed the the probe method are intro- duced in detail.
基金supported by National University Basic Scientific Research Fund of China(Grant No.N100403009)National Natural Science Foundation of China(Grant No.50875041)
文摘The existing researches of the evaluation method of ride comfort of vehicle mainly focus on the level of human feelings to vibration. The level of human feelings to vibration is influenced by many factors, however, the ride comfort according to the common principle of probability and statistics and simple binary logic is tmable to reflect these uncertainties. The random fuzzy evaluation model from people subjective response to vibration is adopted in the paper, these uncertainties are analyzed from the angle of psychological physics. Discussing the traditional evaluation of ride comfort during vehicle vibration, a fuzzily random evaluation model on the basis of annoyance rate is proposed for the human body＇s subjective response to vibration, with relevant fuzzy membership function and probability distribution given. A half-car four degrees of freedom suspension vibration model is described, subject to irregular excitations from the road surface, with the aid of software Matlab/Simulink. A new kind of evaluation method for ride comfort of vehicles is proposed in the paper, i.e., the annoyance rate evaluation method. The genetic algorithm and neural network control theory are used to control the system. Simulation results are obtained, such as the comparison of comfort reaction to vibration environments between before and after control, relationship of annoyance rate to vibration frequency and weighted acceleration, based on ISO 2631 / 1 （1982）, ISO 2631-1 （1997） and annoyance rate evaluation method, respectively. Simulated assessment results indicate that the proposed active suspension systems prove to be effective in the vibration isolation of the suspension system, and the subjective response of human being can be promoted from very uncomfortable to a little uncomfortable. Furthermore, the novel evaluation method based on annoyance rate can further estimate quantitatively the number of passengers who feel discomfort due to vibration. A new analysis method of vehicle comfort is presented.
基金financially supported by the National Natural Science Foundation of China(Grant No.41790432)Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA20030301)。
文摘Internal erosion occurs when fine particles escape from the soil driven by seepage flow,which is considered to be the crucial factor causing the failure of earth structures filled with gravelly soil.The objective of this paper is to suggest an appropriate method to assess internal erosion potential of gravelly soil.By analyzing the sensitivity of soil material to internal erosion,the variable(Dc15/df85)max and the content of coarse particles(Pc)are selected as the evaluation indexes(Dc15 and df85 are the diameters of 15%mass passing in the coarse component and 85%mass passing in the fine component,respectively).A series of gravelly soils with different particle size distributions are tested for internal erosion by the self-made permeameter.Based on the test results,an evaluation method for the internal erosion of gravelly soil is proposed.Gravelly soil is prone to internal erosion when 60%≤Pc<95%and(Dc15/df85)max≥9.5.The proposed method shows good accuracy in evaluating the internal erosion of 36 soil samples from other studies,which confirms the reliability of the method.The proposed method makes it possible to accurately assess internal erosion of gravelly soil,and an alternative method is provided for engineers to determine whether there is a risk of internal erosion in earth structures consisting of gravelly soil.
基金Science and technology research and development program of the Ministry of Railways(1219YF1305)
文摘Taking a high-speed train in China as an example,using computer simulation technology and comparing with the test data,the three current methods including linear stability analysis method,nonlinear stability analysis method and the field testing criterion are studied to evaluate stability of high-speed trains.A new stability evaluation method is proposed which can be used to evaluate lateral stability of high-speed vehicle based on the codes of UIC 515and UIC 518.From the viewpoint of taking the most unfavorable track conditions into account and improving the safety margin,the new method uses the root mean square of bogie lateral acceleration as a criterion to evaluate the lateral stability of high-speed trains.Numerical example shows that the proposed method not only considers the forced vibration caused by track irregularities in the actual practice,but also takes the instability self-excited vibration into account,so it can realize early warning of bogie slight unstable oscillation,meanwhile the method itself does not involve complex algorithms which has the possibility of engineering applications.
基金This project was supported by the Evaluate Quality of Satellite TT&C Mission(C0112)
文摘The fuzzy integration evaluation method （FIEM） is studied in order to select the best orbital elements from the multi-group initial orbits determined by a satellite TT＆C （Tracking, Telemetry and Control） center with all kinds of data sources. By employing FIEM together with the experience of TT＆C experts, the index system to evaluate the selection of the best initial orbits is established after the data sources and orbit determination theories are studied. Besides, the concrete steps in employing the method are presented. Moreover, by taking the objects to be evaluated as evaluation experts, the problem of how to generate evaluation matrices is solved. Through practical application, the method to select the best initial orbital elements has been proved to be flexible and effective The originality of the method is to find a new evaluation criterion （comparing the actually tracked orbits） replacing the traditional one （comparing the nominal orbits） for selecting the best orbital elements.
基金the Research Project from Ministry of Industry and Information Technology of People’s Republic of China。
文摘Helicopter plays an increasingly significant role in Maritime Search and Rescue(MSAR),and it will perform MSAR mission based on response plans when an accident occurs.Thus the rationality of response plan determines the success of MSAR mission to a large extent.However,with the impact of many uncertainty factors,it is difficult to evaluate response plans comprehensively before performing them.Aiming at these problems,an evaluation framework of helicopter MSAR response plan named UMAD is proposed in this paper,which reveals the influence mechanism of uncertainty factors based on Multi-Agent method and analyzes the mission flow based on Discrete Event System(DEVS)method.Furthermore,the evaluation criterion and indicators of response plan are extracted from the aspects of safety and effectiveness.Meanwhile,the Monte Carlo method is adapted to calculate the probability distribution and robustness of response plan comprehensive result.Finally,in order to illustrate the validity of this method,it is discussed and verified by an application example of evaluating multiple response plans to the same MSAR scenario.The results show that this method can analyze the influence of uncertainty more systematically and optimize response plans more comprehensively.
文摘China vigorously is carrying out the construction of green building and ecological city during " The 12 th five-Year plan". Now,although the identification system of design and operation have been implemented in the evaluation of green building,lacking of appropriate evaluation after use. The actual operation results of many buildings,which have got a green building logo,are not satisfied from the user 's perspective. In this paper,an evaluation method that combines the actual building energy consumption and users' satisfaction has been discussed,based on the post occupancy evaluation( POE) theory and the Big data technology. Through the comparison and analysis of building objective operational metrics and users subjective feelings indicators,the green buildings' POE has been achieved. Finally,the study analyzes the assessed value of green building's POE from the three-time dimensions,short-term,medium-term and long-term. And the outlook of the direction is looking forward to the follow-up study.
基金Project(51078090)supported by the National Natural Science Foundation of China
文摘The cracking behavior of lightweight aggregate concrete(LWAC) was investigated by mechanical analysis, SEM and cracking-resistant test where a shrinkage-restrained ring with a clapboard was used. The relationship between the ceramsite type and the cracking resistance of LWAC was built up and compared with that of normal-weight coarse aggregate concrete(NWAC). A new method was proposed to evaluate the cracking resistance of concrete, where the concepts of cracking coefficient ζt(t) and the evaluation index Acr(t) were proposed, and the development of micro-cracks and damage accumulation were recognized. For the concrete with an ascending cracking coefficient curve, the larger Acr(t) is, the lower cracking resistance of concrete is. For the concrete with a descending cracking coefficient curve, the larger Acr(t) is, the stronger the cracking resistance of concrete is. The evaluation results show that in the case of that all the three types of coarse aggregates in concrete are pre-soaked for 24 h, NWAC has the lowest cracking resistance, followed by the LWAC with lower water absorption capacity ceramsite and the LWAC with higher water absorption capacity ceramsite has the strongest cracking resistance. The proposed method has obvious advantages over the cracking age method, because it can evaluate the cracking behavior of concrete even if the concrete has not an observable crack.
文摘This paper firstly introduced the degree of livability of a city from the social civilization,economic affluence,environmental beauty,resource carrying capacity,and life convenience. Based on the principle of the fuzzy comprehensive evaluation,it analyzed the connection between influencing factors,and established a comprehensive evaluation model for calculation of the livability index of a city. Finally,it obtained the relative livability of each city and the ranking of livability of each city.
基金Item Sponsored by the National Science and Technology Support Plan of China(2011BAF15B03)National Natural Science Foundation of China(51305387)Hebei Province Colleges and Universities Natural Science Research Youth Foundation of China(Q2012104)
文摘Quantitative level evaluation of cold-rolled strip was significant for the shape control and the product structure optimization. Based on the probability statistics method and the shape pattern recognition method, the shape evaluation model of cold-rolled strip was established to evaluate real-time shape of the online strip. The model was embedded in the shape control system, and the online strip shape state was real-time observed whether to meet the technical indicators, so the shape level could be identified and evaluated. Based on the shape evaluation indicators, the shape component could be well controlled to improve the shape hit rate and the control stability, so that the rolled strip shape could meet the technical requirements. At a 1050 cold strip mill, the shape data of the scene typical specifications strip were online collected and real-time evaluated, and the hit of macro shape in less than 8 I was 68.44%, indicating that the mill shape control had considerable room for improvement, as well as the evaluation method was feasible and practical for quantitative evaluation of the strip shape. So the new evaluation model has important guiding significance to increase value-added and reduce product quality objection.
基金Funded by the National Natural Science Foundation of China(No.50875036)
文摘3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evaluating for C/Ph composite and Duralumin,the 2D evaluation method of the cutting surface topography of C/Ph composite loses a lot of information,the characteristics of the surface topography of C/Ph composite can be comprehensively and authentically evaluated only by 3D evaluation method.Furthermore,3D amplitude and spatial parameters were adopted to evaluate the surface.The results show that： the topography of the C/Ph composite is anisotropic,there are more valleys in the machined surface of C/Ph than that of duralumin,and there are not obvious feeding textures for C/Ph,which indicates the machining mechanism is different from the metal.In conclusion,the topography of the C/Ph composite cutting surface is anisotropic;the cutting surface of C/Ph composite needs 3D evaluation method.
基金Supported by China Postdoctoral Science Foundation (20090460873)
文摘Fuzzy comprehensive evaluation method was used to develop a standard model to analyze and evaluate nearness degree of water environment quality at breeding area of Shuidong Bay in China.Results showed that certain environment contamination factors in some areas seriously exceeded the standard value and led to the whole water quality at the third class level.The measurements should be taken to promote the sustainable development of breeding area in Shuidong Bay.
