A criterion of the metastable extension of solid solubility was proposed.When the eutectic concentration arm ratio parameter of an alloy,J>10,the hypereutectic extension and the metastable solid solubility limit be...A criterion of the metastable extension of solid solubility was proposed.When the eutectic concentration arm ratio parameter of an alloy,J>10,the hypereutectic extension and the metastable solid solubility limit beyond eutectic concentration may be obtained.When J≤10, the hypoeutectic extension may be obtained.The extension parameter,C_(eq)~s/C_(cu),is directly proportional to the parameter J.Thus,it seems easy to predict the tendency of the solid solu- hility extension under rapid solidification on the basis of the eutectic phase diagram.展开更多
Al-Cu-Y alloys were prepared by molten salt electrolysis in fluoride-oxide system composed of electrolyte（Na3 AlF6-AlF3-LiF-MgF2） and oxide（Al2 O3-CuO-Y2 O3）. Cathodic reduction process of Al2 O3,CuO and Y2 O3 wer...Al-Cu-Y alloys were prepared by molten salt electrolysis in fluoride-oxide system composed of electrolyte（Na3 AlF6-AlF3-LiF-MgF2） and oxide（Al2 O3-CuO-Y2 O3）. Cathodic reduction process of Al2 O3,CuO and Y2 O3 were analyzed by cyclic voltammetry and chronoamperometry. Components and phase composition of alloy samples prepared by potentiostatic electrolysis were characterized by scanning electron microscopy and energy dispersive spectroscopy. The results show that the Al-Cu-Y alloy can be prepared in the AIF3-NaF-5 wt%LiF-5 wt%MgF2（NaF/AlF3 = 2.2, molecular ratio） eutectic system with mixed oxide（Al2 O3-CuO-Y2 O3） through 2 h at the conditions of a temperature of 1208 K, cell voltage3.0 V, cathode current density 0.7 A/cm^2. Al（Ⅲ） and Cu（Ⅱ） ions can be reduced to zero valence Al（0） and Cu（0） directly on carbonaceous electrode surface by instantaneous nucleation, respectively, the reduction process is controlled by diffusion. The reduction potential of Y（Ⅲ） ions is close to the active ions of fluoride melts, but strengthened phase AI3 Y can be formed through electrochemical reduction and alloyed process with active Al（Ⅲ） and Cu（Ⅱ） ions, meanwhile, the Al2 Cu and Al3 Y phases are distributed at the grain boundary of Al matrix.展开更多
This article presents a comprehensive overview of recent advancements in natural product extraction,focusing on the evolution from deep eutectic solvents(DESs)to deep eutectic systems(DESys)for extraction.DESs,known f...This article presents a comprehensive overview of recent advancements in natural product extraction,focusing on the evolution from deep eutectic solvents(DESs)to deep eutectic systems(DESys)for extraction.DESs,known for their environmentally friendly properties,have become crucial in extracting various natural products from plants,including micromolecules,lignin,and polysaccharides.Research into the extraction mechanism reveals that target compounds typically form hydrogen bonds with DESs,effectively becoming part of the solvent system.This insight has led to the development of the DESys extraction method,where hydrogen bond acceptors(HBAs)and hydrogen bond donors(HBDs)are directly mixed with the sample to form a DESys containing the target compounds.The shift from DES-based extraction to DESys-based extraction introduces innovative approaches where target compounds are integral to the solvent system,allowing for one-step dissolution and extraction.This methodology eliminates the need for pre-prepared DESs,simplifying processes and enhancing extraction efficiency.Additionally,strategies for DESs recycling and reuse contribute to sustainability efforts,offering cost-effective and environmentally friendly extraction solutions.The expanding applications of DES-based and DESys-based natural product extraction in cosmetics,food,industry,and environmental fields highlight their promising development potential.By delineating the transition from DES-based to DESys-based extraction of natural products,this review offers valuable insights for advancing the practice of green chemical engineering.展开更多
Growing demand for sustainable,high-performance materials is driving research to replace petroleumbased plastics with abundant biomass,especially cellulose.However,the effective modification and functionalization of c...Growing demand for sustainable,high-performance materials is driving research to replace petroleumbased plastics with abundant biomass,especially cellulose.However,the effective modification and functionalization of cellulose is often impeded by complex processing requirements and limited performance tunability.Here,an innovative“active”green medium strategy based on an ethyl cellulose/thymol eutectic system is reported,enabling in situ chemical modification of eutectic components and the construction of dynamic self-adaptive networks without external catalysts or initiators.Through precise molecular design,dynamic boroxine networks and acrylate crosslinking networks are synergistically integrated into the cellulosic bioplastic(CBP)matrix.The resulting CBP-A2B8 exhibits exceptional optical transparency(~85%),superior mechanical properties(tensile strength~30 MPa),facile thermal processability,and closed-loop recyclability.Its chemical structure and mechanical performance remain highly stable even after 20 hot-compression recycling cycles.Complete biodegradation occurs under natural environmental conditions within approximately 100 days.Furthermore,the bioplastic,when combined with silver nanowires,forms high-performance flexible transparent conductive films successfully applied in customizable electroluminescent devices.Post-lifecycle,device components(silver nanowires and CBP matrix)are efficiently separated and recycled using a straightforward solvent-based method.This eutectic system-mediated strategy offers a novel pathway for the development of sustainable,high-performance bioplastics with a closed-loop lifecycle.展开更多
Metal organic framework(MOF) assembled with coordination bonds has the disadvantage of poor stability that limits its application in the field of stationary phase,while covalent organic framework(COF)assembled through...Metal organic framework(MOF) assembled with coordination bonds has the disadvantage of poor stability that limits its application in the field of stationary phase,while covalent organic framework(COF)assembled through covalent bonds exhibits excellent structural stability.It has been shown that the stationary phases prepared by combining MOF and COF can make up for the poor stability of MOF@SiO_(2),and the MOF/COF composites have superior chromatographic separation performance.However,the traditional methods for preparing COF/MOF based stationary phases are generally solvent thermal synthesis.In this study,a green and low-cost synthesis method was proposed for the preparation of MOF/COF@SiO_(2) stationary phase.Firstly,COF@SiO_(2) was prepared in a choline chloride/ethylene glycol based deep eutectic solvent(DES).Secondly,another acid-base tunable DES prepared by mixing p-toluenesulfonic acid(PTSA)and 2-methylimidazole in different proportions was introduced as the reaction solvent and reactant for rapid synthesis of MOF/COF@SiO_(2).Compared with the toxic transition metal-based MOFs selected in most previous studies,a lightweight and non-toxic S-zone metal(calcium) based MOF was employed in this study.PTSA and calcium will form the calcium/oxygen-containing organic acid framework in acidic DES,which assembles with terephthalic acid dissolved in basic DES to form MOF.The strong hydrogen bonding effect of DES can facilitate rapid assembly of Ca-MOF.The obtained Ca-MOF/COF@SiO_(2) can be used for multi-mode chromatography to efficiently separate multiple isomeric/hydrophilic/hydrophobic analytes.The synthesis method of Ca-MOF/COF@SiO_(2) is green and mild,especially the use of acid-base tunable DES promotes the rapid synthesis of non-toxic Ca-MOF/COF@silica composites,which offers an innovative approach of greenly synthesizing novel MOF/COF stationary phases and extends their applications in the field of chromatography.展开更多
As the demand for sustainable energy sources continues to rise,the need for efficient and reliable energy storage systems becomes crucial.In order to effectively store and distribute renewable energy,new and innovativ...As the demand for sustainable energy sources continues to rise,the need for efficient and reliable energy storage systems becomes crucial.In order to effectively store and distribute renewable energy,new and innovative solutions must be explored.This review examines the deep eutectic solvents(DESs)as a green,safe,and affordable solution for the electrochemical energy storage and conversion field,offering tremendous opportunities and a promising future.DESs are a class of environment-friendly solvents known for their low toxicity and unique properties,such as their good conductivity,high thermal stability,and nonflammability.This review explores the fundamentals,preparations,and various interactions that often predominate in the formation of DESs,the properties of DESs,and how DESs are better than traditional solvents involving cost-ineffective and unsafe organic electrolytes and ionic liquids as well as inefficient aqueous systems due to low energy density for electrochemical energy storage applications.Then,a particular focus is placed on the various electrochemical applications of DESs,including their role in the electrolytes in batteries/supercapacitors,electropolishing and electrodeposition of metals,synthesis of electrode materials,recycling of electrodes,and their potential for use in CO_(2)capture.The review concludes by exploring the challenges,research gaps,and future potential of DESs in electrochemical applications,providing a comprehensive overview,and highlighting key considerations for their design and use.展开更多
For the design of eutectic solvents(ESs,usually also known as deep eutectic solvents),the prediction of the solid–liquid equilibria(SLE)between candidate components is of primary relevance.In the present work,the SLE...For the design of eutectic solvents(ESs,usually also known as deep eutectic solvents),the prediction of the solid–liquid equilibria(SLE)between candidate components is of primary relevance.In the present work,the SLE prediction of binary eutectic solvent systems by the COSMO-RS model is systematically evaluated,thereby examining the applicability of this method for ES design.Experimental SLE of such systems are first collected exhaustively from the literature,following which COSMO-RS SLE calculations are accordingly carried out.By comparing the experimental and predicted eutectic points(eutectic temperature and eutectic composition)of the involved systems,the effects of salt component conformer and COSMO-RS parameterization as well as the applicability for different types of components(specifically the second component paired with the first salt one)are identified.The distinct performances of COSMO-RS SLE prediction for systems involving different types of components are further interpreted from the non-ideality and fusion enthalpy point of view.展开更多
The crystallization process of the eutectic composition of GdAlO_3-Al_2O_3 from the amorphous phase prepared by rapid-quenching of melt that leads to the formation of a cantaloupe skin-like microstructure was investig...The crystallization process of the eutectic composition of GdAlO_3-Al_2O_3 from the amorphous phase prepared by rapid-quenching of melt that leads to the formation of a cantaloupe skin-like microstructure was investigated using focused ion-beam scanning electron microscopy (FIB-SEM) and high-resolution transmission electron microscopy (HR-TEM).The amorphous films were heat-treated at temperatures between 1000 °C and 1500 °C for up to 30min to form the eutectic phases of GdAlO_3 and Al_2O_3.The GdAlO_3 and Al_2O_3 crystal phases that formed from the amorphous phase were identified by FIB-SEM and HR-TEM.Both components began to crystallize and grow from the amorphous phase separately at different temperatures.The formation process of these crystal phases was different from that of the ordinary eutectic microstructure solidified from the GdAlO_3-Al_2O_3 system.Therefore,the observed structure is termed "eutectic-like" for distinction.The microstructures formed from the amorphous phases at sufficiently high temperatures consisted of ultra-fine microstructures of individually crystallized components and were similar to ordinary eutectic microstructures.By heat-treating the amorphous films at 1500 °C for either 2 min,8min or 30min,the ultra-fine components of GdAlO_3 and Al_2O_3 were found to crystallize following a eutectic-like stage after 8min of heat treatment.展开更多
In order to confirm the eutectic composition, eutectic temperature and phases of Al-rich Al-RE（La, Ce, Pr, Nd） binary systems, the eutectic Al-RE alloys with the controversial compositions were investigated. The sca...In order to confirm the eutectic composition, eutectic temperature and phases of Al-rich Al-RE（La, Ce, Pr, Nd） binary systems, the eutectic Al-RE alloys with the controversial compositions were investigated. The scanning electron microscopy/energy dispersive spectroscopy（SEM/EDS）, differential scanning calorimetric（DSC） and cooling curve tests analysis indicated that a similar eutectic composition（~12 wt.% RE） on the Al-rich region was observed in the Al-La, Al-Ce, Al-Pr and Al-Nd alloys, and the eutectic structure of the alloys was consisted of α-Al and α-Al11RE3 phases by combining with X-ray diffraction（XRD） tests. In addition, the eutectic temperatures determined by DSC and cooling curve tests were very close and around 645 oC.展开更多
High entropy alloys are the focus of current research.An accurate description of their phase-transformation path,however,is a challenge when their phase constituent and transformation process are complex.In this study...High entropy alloys are the focus of current research.An accurate description of their phase-transformation path,however,is a challenge when their phase constituent and transformation process are complex.In this study,a FeCoNiSn x eutectic high entropy alloy(EHEA)system was investigated and a novel FeCoNiSn EHEA composed of BCC+HCP phases was reported.The transition from the hypoeutectic to the fully eutectic and then to the hypereutectic microstructure with the Sn addition was characterized by the electron backscatter diffraction(EBSD)technology,and the phase-transformation path was clari-fied by crystallographic orientation relationships.The studies reveal that the primary phase of FeCoNiSn x(x=0.2,0.4)is FCC structure,and a further Sn addition induces an obvious phase-transformation from FCC to BCC in both the primary phase and eutectic lamellar,which satisfies the Kurdjumov-Sachs(K-S)or Nishiyama-Wasserman(N-W)variant orientation relationship.The mechanical results confirm that the phase structure and microstructure transition caused by Sn addition do significantly improve the strength and hardness of FeCoNiSn x EHEAs,but have serious adverse effects on plasticity.This study would be of significance to understanding the phase-transformation process in HEAs and preparing the HEAs with aimed mechanical properties.展开更多
It is known that the dense part of any liquid metal consists of ramified clusters of almost regular tetrahedrons (triangular pyramids with atoms in their vertexes) that are connected into chains by faces. Any metal ad...It is known that the dense part of any liquid metal consists of ramified clusters of almost regular tetrahedrons (triangular pyramids with atoms in their vertexes) that are connected into chains by faces. Any metal additive as a second component of liquid alloy can be both beyond these clusters as separated atoms and into them as inherent clusters. The liquid-metal alloy transfers into the second state, at the first eutectic of the solvent. This polymorphic transition of liquid matrix is discovered in the systems, Pb-K and Na-Pb, by molecular-dynamic simulating their microstructure and in experiments on scattering slow neutrons by these alloys of different compositions. In the first system, the obtained results identify both the homogeneous alloy at low concentrations of potassium in liquid lead and the alloy clustering, (Pb4K)n, at potassium concentrations following the eutectic, Pb0.91K0.09. In the second one at the concentrations of lead more than 2%, just the second state is discovered with the clusters, (Na4Pb)n. One can expect the same polymorphic transition in the eutectic, Na0.93Tl0.07, with the micro-inhomogeneity, (Na6Tl)n, and with the melting point of 64 C. This eutectic maintained by the oxygen-free technology and enriched by the isotope, 205Tl, can become the best coolant for fast nuclear reactors due to the depressed chemical activity of sodium and composition stability.展开更多
In order to obtain the suitable phase change material（PCM） with low phase change temperature and improve its heat transfer rate, experimental investigation was conducted. Firstly, different mass ratios of lauric aci...In order to obtain the suitable phase change material（PCM） with low phase change temperature and improve its heat transfer rate, experimental investigation was conducted. Firstly, different mass ratios of lauric acid（LA） and stearic acid（SA） eutectic mixtures were prepared and characterized by differential scanning calorimetry（DSC）. Then, the performance of eutectic mixture during charging process under different fin widths in vertical condition, and performance during charging and discharging processes under different inlet temperature heat transfer fluid（HTF） in horizontal condition were investigated, respectively. The results revealed that the LA-SA eutectic mixture had the suitable phase change temperature and desired latent heat for low-temperature water floor heating system. Wide fins and high inlet temperature HTF significantly enhanced the transfer rate and decreased the melting time.展开更多
As a 3D printing method,laser powder bed fusion(LPBF)technology has been extensively proven to offer significant advantages in fabricating complex structured specimens,achieving ultra-fine microstructures,and enhancin...As a 3D printing method,laser powder bed fusion(LPBF)technology has been extensively proven to offer significant advantages in fabricating complex structured specimens,achieving ultra-fine microstructures,and enhancing performances.In the domain of manufacturing melt-grown oxide ceramics,it encounters substantial challenges in suppressing crack defects during the rapid solidification process.The strategic integration of high entropy alloys(HEA),leveraging the significant ductility and toughness into ceramic powders represents a major innovation in overcoming the obstacles.The ingenious doping of HEA parti-cles preserves the eutectic microstructures of the Al_(2)O_(3)/GdAlO_(3)(GAP)/ZrO_(2)ceramic composite.The high damage tolerance of the HEA alloy under high strain rates enables the absorption of crack energy and alleviation of internal stresses during LPBF,effectively reducing crack initiation and growth.Due to in-creased curvature forces and intense Marangoni convection at the top of the molt pool,particle collision intensifies,leading to the tendency of HEA particles to agglomerate at the upper part of the molt pool.However,this phenomenon can be effectively alleviated in the remelting process of subsequent layer de-position.Furthermore,a portion of the HEA particles partially dissolves and sinks into the molten pool,acting as heterogeneous nucleation particles,inducing the formation of equiaxed eutectic and leading pri-mary phase nucleation.Some HEA particles diffuse into the lamellar ternary eutectic structures,further promoting the refinement of eutectic microstructures due to increased undercooling.The innovative dop-ing of HEA particles has effectively facilitated the fabrication of turbine-structured,conical,and cylindrical ternary eutectic ceramic composite specimens with diameters of about 70 mm,demonstrating significant developmental potential in the field of ceramic composite manufacturing.展开更多
Traditional metals often exhibit a trade-offbetween strength and plasticity,limiting their wide application of metals in aerospace,transportation,energy industry and other fields[1-3].In order to overcome this dilemma...Traditional metals often exhibit a trade-offbetween strength and plasticity,limiting their wide application of metals in aerospace,transportation,energy industry and other fields[1-3].In order to overcome this dilemma,high-entropy alloys(HEAs),proposed by Yeh et al.and Cantor et al.,are currently of great interest in the materials community due to their excellent mechanical properties[4-7].To further promote the wide application of HEAs in industrial production,Lu et al.developed a new eutectic high-entropy alloy(EHEAs)by combining the potential advantages of traditional eutectic alloys and HEAs[8-11].展开更多
The study investigated the oxidation behavior of T91 steel modified with Al(T91-Al)and Si(T91-Si)in lead-bismuth eutectic(LBE)at 450℃under oxygen-saturated conditions(10^(−7)-10^(−8)wt.%)and oxygen-controlled conditi...The study investigated the oxidation behavior of T91 steel modified with Al(T91-Al)and Si(T91-Si)in lead-bismuth eutectic(LBE)at 450℃under oxygen-saturated conditions(10^(−7)-10^(−8)wt.%)and oxygen-controlled conditions(3.2×10^(−4)wt.%).Advanced characterization techniques were employed to under-stand the thermodynamic and kinetic mechanisms of enhanced oxidation properties of the modified T91 steel.The results indicate that the oxidation resistance of the materials follows this order:T91<T91-Al<T91-Si.Noteworthy,the oxidation resistance of T91-Si material exhibited minimal correlation with dissolved oxygen.Under oxygen-controlled conditions,the oxide film of T91 and T91-Al was attacked and broken by LBE,with the former eventually peeling off.In contrast,both materials showed significant ox-ide film thickening,except T91-Si under oxygen-saturated conditions.The addition of Al improved the quality of the inner oxide film on T91-Al by generating Al_(2)O_(3),thereby slowing down the diffusion of Fe from the matrix and enhancing oxidation resistance.Conversely,Si actively participated in the oxidation process of T91-Si,slowing down the diffusion of Fe,and facilitating the diffusion of Cr,thereby strength-ening the oxide film protection.Consequently,the oxide thickness of T91-Si material was only 24%of T91 and 35%of T91-Al under saturated oxygen conditions.展开更多
The deterioration of aqueous zinc-ion batteries(AZIBs)is confronted with challenges such as unregulated Zn^(2+)diffusion,dendrite growth and severe decay in battery performance under harsh environments.Here,a design c...The deterioration of aqueous zinc-ion batteries(AZIBs)is confronted with challenges such as unregulated Zn^(2+)diffusion,dendrite growth and severe decay in battery performance under harsh environments.Here,a design concept of eutectic electrolyte is presented by mixing long chain polymer molecules,polyethylene glycol dimethyl ether(PEGDME),with H_(2)O based on zinc trifluoromethyl sulfonate(Zn(OTf)2),to reconstruct the Zn^(2+)solvated structure and in situ modified the adsorption layer on Zn electrode surface.Molecular dynamics simulations(MD),density functional theory(DFT)calculations were combined with experiment to prove that the long-chain polymer-PEGDME could effectively reduce side reactions,change the solvation structure of the electrolyte and priority absorbed on Zn(002),achieving a stable dendrite-free Zn anode.Due to the comprehensive regulation of solvation structure and zinc deposition by PEGDME,it can stably cycle for over 3200 h at room temperature at 0.5 mA/cm^(2)and 0.5 mAh/cm^(2).Even at high-temperature environments of 60℃,it can steadily work for more than 800 cycles(1600 h).Improved cyclic stability and rate performance of aqueous Zn‖VO_(2)batteries in modified electrolyte were also achieved at both room and high temperatures.Beyond that,the demonstration of stable and high-capacity Zn‖VO_(2)pouch cells also implies its practical application.展开更多
Gels and conductive polymer composites,including hydrogen bonds(HBs),have emerged as promising materials for electro-magnetic wave(EMW)absorption across various applications.However,the relationship between conduction...Gels and conductive polymer composites,including hydrogen bonds(HBs),have emerged as promising materials for electro-magnetic wave(EMW)absorption across various applications.However,the relationship between conduction loss in EMW-absorbing materials and charge transfer in HB remains to be fully understood.In this study,we developed a series of deep eutectic gels to fine-tune the quantity of HB by adjusting the molar ratio of choline chloride(ChCl)and ethylene glycol(EG).Owing to the unique properties of deep eutectic gels,the effects of magnetic loss and polarization loss on EMW attenuation can be disregarded.Our results indicate that the quantity of HB initially increases and then decreases with the introduction of EG,with HB-induced conductive loss following similar pat-terns.At a ChCl and EG molar ratio of 2.4,the gel labeled G22-CE2.4 exhibited the best EMW absorption performance,characterized by an effective absorption bandwidth of 8.50 GHz and a thickness of 2.54 mm.This superior performance is attributed to the synergistic ef-fects of excellent conductive loss and impedance matching generated by the optimal number of HB.This work elucidates the role of HB in dielectric loss for the first time and provides valuable insights into the optimal design of supramolecular polymer absorbers.展开更多
Dual-phase heterogeneous structures confer eutectic high-entropy alloy(EHEA)with excellent strength-ductility synergy under quasi-static tensile loading.However,it is questionable whether the EHEAs pos-sess equally go...Dual-phase heterogeneous structures confer eutectic high-entropy alloy(EHEA)with excellent strength-ductility synergy under quasi-static tensile loading.However,it is questionable whether the EHEAs pos-sess equally good impact toughness because the phase interfaces are vulnerable to crack initiation.This work aimed to study the Charpy impact toughness and fracture behavior of AlCoCrFeNi_(2.1) EHEA.The results indicate that while maintaining high tensile strength and ductility,the AlCoCrFeNi_(2.1) EHEA also shows a satisfactory impact toughness of 25.86 J/cm^(2),superior to most other dual-phase alloys like TC4 titanium alloy or DP steel.Fractography analysis reveals characteristic regions of the fracture surface,which suggests energy absorption mechanisms primarily through ductile dimples,flat cleavage facets,secondary cracks,and microvoids,corresponding to a ductile-brittle mixed fracture mode.Detailed obser-vations of the deformed microstructure through TEM and EBSD demonstrate that FCC(L1_(2))and BCC(B2)phases underwent concurrent tearing along their phase boundaries,indicating a crucial influence of phase boundaries over crack initiation and propagation.The FCC(L1_(2))phase bore almost all plastic deformation of the sample through dislocation slip,whereas the BCC(B2)phase underwent a rapid shearing but almost no dislocation slip.Crack initiation under impact loading typically starts at the FCC(L1_(2))/BCC(B2)inter-face before propagating through the BCC(B2)phase.Additionally,this work further examines the effect of sample size and notch shape on the impact toughness of AlCoCrFeNi_(2.1) EHEA.A comparative analysis of the mechanical behavior under static and impact loading was also conducted,highlighting differences and connections in stress distribution and fracture surface morphology.The study offers valuable insights into the mechanical response and fracture behavior of AlCoCrFeNi_(2.1) EHEA under impact loading,provid-ing crucial information for its potential industrial applications.展开更多
Aqueous Zn-ion batteries(AZIBs)have been regarded as promising alternatives to Li-ion batteries due to their advantages,such as low cost,high safety,and environmental friendliness.However,AZIBs face significant challe...Aqueous Zn-ion batteries(AZIBs)have been regarded as promising alternatives to Li-ion batteries due to their advantages,such as low cost,high safety,and environmental friendliness.However,AZIBs face significant challenges in limited stability and lifetime owing to zinc dendrite growth and serious side reactions caused by water molecules in the aqueous electrolyte during cycling.To address these issues,a new eutectic electrolyte based on Zn(ClO_(4))_(2)·6H_(2)O-N-methylacetamide(ZN)is proposed in this work.Compared with aqueous electrolyte,the ZN eutectic electrolyte containing organic N-methylacetamide could regulate the solvated structure of Zn^(2+),effectively suppressing zinc dendrite growth and side reactions.As a result,the Zn//NH4 V4 O10 full cell with the eutectic ZN-1-3 electrolyte demonstrates significantly enhanced cycling stability after 1000 cycles at 1 A g^(-1).Therefore,this study not only presents a new eutectic electrolyte for zinc-ion batteries but also provides a deep understanding of the influence of Zn^(2+)solvation structure on the cycle stability,contributing to the exploration of novel electrolytes for high-performance AZIBs.展开更多
Developing high-strength and ductile metallic parts with designable shapes is an unfading research topic for material science and engineering.As a revolutionary technology,additive manufacturing(AM)pro-vides a new pat...Developing high-strength and ductile metallic parts with designable shapes is an unfading research topic for material science and engineering.As a revolutionary technology,additive manufacturing(AM)pro-vides a new pathway for producing complex-shaped metallic parts with the possibility of in situ tailoring their microstructure.However,AM is not always ideally applicable for all metals and alloys.Eutectic high entropy alloys(EHEAs)contain both the advantages of the eutectic alloys and high entropy alloys(HEAs),and EHEAs show significant potential in AM due to their excellent mechanical properties and good fluid-ity.Herein,heterogeneous and ultra-fine eutectic lamellar microstructure with directional growth along the deposition direction(DD)was obtained by adjusting the process parameters of AM to improve the strength and ductility of EHEAs.Compared with the as-cast sample,the simultaneous increment in both strength and ductility is achieved by AM.Combination of strength and ductility of the AM sample ten-sile along the DD direction(yield strength σ_(y)=1115 MPa,ultimate tensile strength σ_(UTS)=1417 MPa,ultimate tensile strain ε_(U)=23%)in this work was superior to most of the additive manufactured al-loys and comparable to the thermomechanical-treated EHEAs with the best mechanical properties.The high strength and good ductility of the AM were mainly attributed to the ultra-fine lamellar nature and fully constrained soft and hard lamellar microstructure,which produces an obvious hetero-deformation induced(HDI)strengthening and high crack buffering effect during the deformation.This work provides a new possibility to achieve high strength and ductile complex-shaped metallic parts via designing direc-tional lamellar eutectic structures by AM.展开更多
文摘A criterion of the metastable extension of solid solubility was proposed.When the eutectic concentration arm ratio parameter of an alloy,J>10,the hypereutectic extension and the metastable solid solubility limit beyond eutectic concentration may be obtained.When J≤10, the hypoeutectic extension may be obtained.The extension parameter,C_(eq)~s/C_(cu),is directly proportional to the parameter J.Thus,it seems easy to predict the tendency of the solid solu- hility extension under rapid solidification on the basis of the eutectic phase diagram.
基金Project supported by the National Natural Science Foundation of China(51564015)
文摘Al-Cu-Y alloys were prepared by molten salt electrolysis in fluoride-oxide system composed of electrolyte（Na3 AlF6-AlF3-LiF-MgF2） and oxide（Al2 O3-CuO-Y2 O3）. Cathodic reduction process of Al2 O3,CuO and Y2 O3 were analyzed by cyclic voltammetry and chronoamperometry. Components and phase composition of alloy samples prepared by potentiostatic electrolysis were characterized by scanning electron microscopy and energy dispersive spectroscopy. The results show that the Al-Cu-Y alloy can be prepared in the AIF3-NaF-5 wt%LiF-5 wt%MgF2（NaF/AlF3 = 2.2, molecular ratio） eutectic system with mixed oxide（Al2 O3-CuO-Y2 O3） through 2 h at the conditions of a temperature of 1208 K, cell voltage3.0 V, cathode current density 0.7 A/cm^2. Al（Ⅲ） and Cu（Ⅱ） ions can be reduced to zero valence Al（0） and Cu（0） directly on carbonaceous electrode surface by instantaneous nucleation, respectively, the reduction process is controlled by diffusion. The reduction potential of Y（Ⅲ） ions is close to the active ions of fluoride melts, but strengthened phase AI3 Y can be formed through electrochemical reduction and alloyed process with active Al（Ⅲ） and Cu（Ⅱ） ions, meanwhile, the Al2 Cu and Al3 Y phases are distributed at the grain boundary of Al matrix.
基金supported by the Jiangsu Agricultural Science and Technology Innovation Fund,China(Grant No.SCX(20)3083)the Priority Academic Program Development of Jiangsu Higher Education InstitutionsJiangsu Collaborative Innovation Center of Biomedical Functional Materials。
文摘This article presents a comprehensive overview of recent advancements in natural product extraction,focusing on the evolution from deep eutectic solvents(DESs)to deep eutectic systems(DESys)for extraction.DESs,known for their environmentally friendly properties,have become crucial in extracting various natural products from plants,including micromolecules,lignin,and polysaccharides.Research into the extraction mechanism reveals that target compounds typically form hydrogen bonds with DESs,effectively becoming part of the solvent system.This insight has led to the development of the DESys extraction method,where hydrogen bond acceptors(HBAs)and hydrogen bond donors(HBDs)are directly mixed with the sample to form a DESys containing the target compounds.The shift from DES-based extraction to DESys-based extraction introduces innovative approaches where target compounds are integral to the solvent system,allowing for one-step dissolution and extraction.This methodology eliminates the need for pre-prepared DESs,simplifying processes and enhancing extraction efficiency.Additionally,strategies for DESs recycling and reuse contribute to sustainability efforts,offering cost-effective and environmentally friendly extraction solutions.The expanding applications of DES-based and DESys-based natural product extraction in cosmetics,food,industry,and environmental fields highlight their promising development potential.By delineating the transition from DES-based to DESys-based extraction of natural products,this review offers valuable insights for advancing the practice of green chemical engineering.
基金supported by the Jiangsu Provincial Natural Science Foundation(BK20240685)the Opening Project of Key Laboratory of Optoelectronic Chemical Materials and Devices,Ministry of Education,Jianghan University(JDGD202309)。
文摘Growing demand for sustainable,high-performance materials is driving research to replace petroleumbased plastics with abundant biomass,especially cellulose.However,the effective modification and functionalization of cellulose is often impeded by complex processing requirements and limited performance tunability.Here,an innovative“active”green medium strategy based on an ethyl cellulose/thymol eutectic system is reported,enabling in situ chemical modification of eutectic components and the construction of dynamic self-adaptive networks without external catalysts or initiators.Through precise molecular design,dynamic boroxine networks and acrylate crosslinking networks are synergistically integrated into the cellulosic bioplastic(CBP)matrix.The resulting CBP-A2B8 exhibits exceptional optical transparency(~85%),superior mechanical properties(tensile strength~30 MPa),facile thermal processability,and closed-loop recyclability.Its chemical structure and mechanical performance remain highly stable even after 20 hot-compression recycling cycles.Complete biodegradation occurs under natural environmental conditions within approximately 100 days.Furthermore,the bioplastic,when combined with silver nanowires,forms high-performance flexible transparent conductive films successfully applied in customizable electroluminescent devices.Post-lifecycle,device components(silver nanowires and CBP matrix)are efficiently separated and recycled using a straightforward solvent-based method.This eutectic system-mediated strategy offers a novel pathway for the development of sustainable,high-performance bioplastics with a closed-loop lifecycle.
基金supported by National Natural Science Foundation of China (Nos.21906124,32302202)Natural Science Foundation of Hubei Province (No.2017CFB220)Natural Science Foundation of Shandong Province (No.ZR2023MH278)。
文摘Metal organic framework(MOF) assembled with coordination bonds has the disadvantage of poor stability that limits its application in the field of stationary phase,while covalent organic framework(COF)assembled through covalent bonds exhibits excellent structural stability.It has been shown that the stationary phases prepared by combining MOF and COF can make up for the poor stability of MOF@SiO_(2),and the MOF/COF composites have superior chromatographic separation performance.However,the traditional methods for preparing COF/MOF based stationary phases are generally solvent thermal synthesis.In this study,a green and low-cost synthesis method was proposed for the preparation of MOF/COF@SiO_(2) stationary phase.Firstly,COF@SiO_(2) was prepared in a choline chloride/ethylene glycol based deep eutectic solvent(DES).Secondly,another acid-base tunable DES prepared by mixing p-toluenesulfonic acid(PTSA)and 2-methylimidazole in different proportions was introduced as the reaction solvent and reactant for rapid synthesis of MOF/COF@SiO_(2).Compared with the toxic transition metal-based MOFs selected in most previous studies,a lightweight and non-toxic S-zone metal(calcium) based MOF was employed in this study.PTSA and calcium will form the calcium/oxygen-containing organic acid framework in acidic DES,which assembles with terephthalic acid dissolved in basic DES to form MOF.The strong hydrogen bonding effect of DES can facilitate rapid assembly of Ca-MOF.The obtained Ca-MOF/COF@SiO_(2) can be used for multi-mode chromatography to efficiently separate multiple isomeric/hydrophilic/hydrophobic analytes.The synthesis method of Ca-MOF/COF@SiO_(2) is green and mild,especially the use of acid-base tunable DES promotes the rapid synthesis of non-toxic Ca-MOF/COF@silica composites,which offers an innovative approach of greenly synthesizing novel MOF/COF stationary phases and extends their applications in the field of chromatography.
文摘As the demand for sustainable energy sources continues to rise,the need for efficient and reliable energy storage systems becomes crucial.In order to effectively store and distribute renewable energy,new and innovative solutions must be explored.This review examines the deep eutectic solvents(DESs)as a green,safe,and affordable solution for the electrochemical energy storage and conversion field,offering tremendous opportunities and a promising future.DESs are a class of environment-friendly solvents known for their low toxicity and unique properties,such as their good conductivity,high thermal stability,and nonflammability.This review explores the fundamentals,preparations,and various interactions that often predominate in the formation of DESs,the properties of DESs,and how DESs are better than traditional solvents involving cost-ineffective and unsafe organic electrolytes and ionic liquids as well as inefficient aqueous systems due to low energy density for electrochemical energy storage applications.Then,a particular focus is placed on the various electrochemical applications of DESs,including their role in the electrolytes in batteries/supercapacitors,electropolishing and electrodeposition of metals,synthesis of electrode materials,recycling of electrodes,and their potential for use in CO_(2)capture.The review concludes by exploring the challenges,research gaps,and future potential of DESs in electrochemical applications,providing a comprehensive overview,and highlighting key considerations for their design and use.
基金the support of the Sino-German joint research project leaded by Deutsche Forschungsgemeinshaft(DFG)National Natural Science Foundation of China(NSFC)under the grants SU 189/9-1 and 21861132019,respectively
文摘For the design of eutectic solvents(ESs,usually also known as deep eutectic solvents),the prediction of the solid–liquid equilibria(SLE)between candidate components is of primary relevance.In the present work,the SLE prediction of binary eutectic solvent systems by the COSMO-RS model is systematically evaluated,thereby examining the applicability of this method for ES design.Experimental SLE of such systems are first collected exhaustively from the literature,following which COSMO-RS SLE calculations are accordingly carried out.By comparing the experimental and predicted eutectic points(eutectic temperature and eutectic composition)of the involved systems,the effects of salt component conformer and COSMO-RS parameterization as well as the applicability for different types of components(specifically the second component paired with the first salt one)are identified.The distinct performances of COSMO-RS SLE prediction for systems involving different types of components are further interpreted from the non-ideality and fusion enthalpy point of view.
基金part of the study under the "Human Resource Development Center for Economic Region Leading Industry" Projectsupported by the Ministry of Education,Science & Technology(MEST)by the National Research Foundation of Korea(NRF)
文摘The crystallization process of the eutectic composition of GdAlO_3-Al_2O_3 from the amorphous phase prepared by rapid-quenching of melt that leads to the formation of a cantaloupe skin-like microstructure was investigated using focused ion-beam scanning electron microscopy (FIB-SEM) and high-resolution transmission electron microscopy (HR-TEM).The amorphous films were heat-treated at temperatures between 1000 °C and 1500 °C for up to 30min to form the eutectic phases of GdAlO_3 and Al_2O_3.The GdAlO_3 and Al_2O_3 crystal phases that formed from the amorphous phase were identified by FIB-SEM and HR-TEM.Both components began to crystallize and grow from the amorphous phase separately at different temperatures.The formation process of these crystal phases was different from that of the ordinary eutectic microstructure solidified from the GdAlO_3-Al_2O_3 system.Therefore,the observed structure is termed "eutectic-like" for distinction.The microstructures formed from the amorphous phases at sufficiently high temperatures consisted of ultra-fine microstructures of individually crystallized components and were similar to ordinary eutectic microstructures.By heat-treating the amorphous films at 1500 °C for either 2 min,8min or 30min,the ultra-fine components of GdAlO_3 and Al_2O_3 were found to crystallize following a eutectic-like stage after 8min of heat treatment.
基金supported by the National Natural Science Foundation of China(21573077,51373055)the International Lead and Zinc Research Organization Foundation(ILZRO/IZA/CN201212)
文摘In order to confirm the eutectic composition, eutectic temperature and phases of Al-rich Al-RE（La, Ce, Pr, Nd） binary systems, the eutectic Al-RE alloys with the controversial compositions were investigated. The scanning electron microscopy/energy dispersive spectroscopy（SEM/EDS）, differential scanning calorimetric（DSC） and cooling curve tests analysis indicated that a similar eutectic composition（~12 wt.% RE） on the Al-rich region was observed in the Al-La, Al-Ce, Al-Pr and Al-Nd alloys, and the eutectic structure of the alloys was consisted of α-Al and α-Al11RE3 phases by combining with X-ray diffraction（XRD） tests. In addition, the eutectic temperatures determined by DSC and cooling curve tests were very close and around 645 oC.
基金the Natural Science Foundation of China(No.51975474)the Fundamental Research Funds for the Central Universities(No.3102019JC001)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(No.CX201907).
文摘High entropy alloys are the focus of current research.An accurate description of their phase-transformation path,however,is a challenge when their phase constituent and transformation process are complex.In this study,a FeCoNiSn x eutectic high entropy alloy(EHEA)system was investigated and a novel FeCoNiSn EHEA composed of BCC+HCP phases was reported.The transition from the hypoeutectic to the fully eutectic and then to the hypereutectic microstructure with the Sn addition was characterized by the electron backscatter diffraction(EBSD)technology,and the phase-transformation path was clari-fied by crystallographic orientation relationships.The studies reveal that the primary phase of FeCoNiSn x(x=0.2,0.4)is FCC structure,and a further Sn addition induces an obvious phase-transformation from FCC to BCC in both the primary phase and eutectic lamellar,which satisfies the Kurdjumov-Sachs(K-S)or Nishiyama-Wasserman(N-W)variant orientation relationship.The mechanical results confirm that the phase structure and microstructure transition caused by Sn addition do significantly improve the strength and hardness of FeCoNiSn x EHEAs,but have serious adverse effects on plasticity.This study would be of significance to understanding the phase-transformation process in HEAs and preparing the HEAs with aimed mechanical properties.
文摘It is known that the dense part of any liquid metal consists of ramified clusters of almost regular tetrahedrons (triangular pyramids with atoms in their vertexes) that are connected into chains by faces. Any metal additive as a second component of liquid alloy can be both beyond these clusters as separated atoms and into them as inherent clusters. The liquid-metal alloy transfers into the second state, at the first eutectic of the solvent. This polymorphic transition of liquid matrix is discovered in the systems, Pb-K and Na-Pb, by molecular-dynamic simulating their microstructure and in experiments on scattering slow neutrons by these alloys of different compositions. In the first system, the obtained results identify both the homogeneous alloy at low concentrations of potassium in liquid lead and the alloy clustering, (Pb4K)n, at potassium concentrations following the eutectic, Pb0.91K0.09. In the second one at the concentrations of lead more than 2%, just the second state is discovered with the clusters, (Na4Pb)n. One can expect the same polymorphic transition in the eutectic, Na0.93Tl0.07, with the micro-inhomogeneity, (Na6Tl)n, and with the melting point of 64 C. This eutectic maintained by the oxygen-free technology and enriched by the isotope, 205Tl, can become the best coolant for fast nuclear reactors due to the depressed chemical activity of sodium and composition stability.
基金Funded by the Key Project of National Natural Science Foundation of China(No.51432007)the National Key Research and Development Program of China(No.2016 YFC0700201)+1 种基金the Science,Technology Support Program of Hubei Province(Nos.2014BAA134 and 2015BAA107)the Postdoctoral Fund of China(2017M612629)
文摘In order to obtain the suitable phase change material（PCM） with low phase change temperature and improve its heat transfer rate, experimental investigation was conducted. Firstly, different mass ratios of lauric acid（LA） and stearic acid（SA） eutectic mixtures were prepared and characterized by differential scanning calorimetry（DSC）. Then, the performance of eutectic mixture during charging process under different fin widths in vertical condition, and performance during charging and discharging processes under different inlet temperature heat transfer fluid（HTF） in horizontal condition were investigated, respectively. The results revealed that the LA-SA eutectic mixture had the suitable phase change temperature and desired latent heat for low-temperature water floor heating system. Wide fins and high inlet temperature HTF significantly enhanced the transfer rate and decreased the melting time.
基金supported by the National Natural Science Foundation of China(Nos.52130204,52174376,52202070,51822405)Guangdong Basic and Applied Basic Research Foundation(No.2021B1515120028)+6 种基金TQ Innovation Foundation(No.23-TQ09-02-ZT-01-005)Aeronautical Science Foundation of China(No.20220042053001)Science and Technology Innovation Team Plan of Shaanxi Province(No.2021TD-17)Key R&D Project of Shaanxi Province(No.2024GX-YBXM-220)Thousands Person Plan of Jiangxi Province(JXSQ2020102131)Fundamental Research Funds for the Central Universities(Nos.D5000230348,D5000220057)China Scholarship Council(Nos.202206290133,202306290190).
文摘As a 3D printing method,laser powder bed fusion(LPBF)technology has been extensively proven to offer significant advantages in fabricating complex structured specimens,achieving ultra-fine microstructures,and enhancing performances.In the domain of manufacturing melt-grown oxide ceramics,it encounters substantial challenges in suppressing crack defects during the rapid solidification process.The strategic integration of high entropy alloys(HEA),leveraging the significant ductility and toughness into ceramic powders represents a major innovation in overcoming the obstacles.The ingenious doping of HEA parti-cles preserves the eutectic microstructures of the Al_(2)O_(3)/GdAlO_(3)(GAP)/ZrO_(2)ceramic composite.The high damage tolerance of the HEA alloy under high strain rates enables the absorption of crack energy and alleviation of internal stresses during LPBF,effectively reducing crack initiation and growth.Due to in-creased curvature forces and intense Marangoni convection at the top of the molt pool,particle collision intensifies,leading to the tendency of HEA particles to agglomerate at the upper part of the molt pool.However,this phenomenon can be effectively alleviated in the remelting process of subsequent layer de-position.Furthermore,a portion of the HEA particles partially dissolves and sinks into the molten pool,acting as heterogeneous nucleation particles,inducing the formation of equiaxed eutectic and leading pri-mary phase nucleation.Some HEA particles diffuse into the lamellar ternary eutectic structures,further promoting the refinement of eutectic microstructures due to increased undercooling.The innovative dop-ing of HEA particles has effectively facilitated the fabrication of turbine-structured,conical,and cylindrical ternary eutectic ceramic composite specimens with diameters of about 70 mm,demonstrating significant developmental potential in the field of ceramic composite manufacturing.
基金financial supported by the Natural Science Foundation of Jiangsu Provincial Education Department(No.24KJB430003)the Natural Science Foundation for Young Scholars of Jiangsu Province(No.BK20240979)+3 种基金support of Natural Science Foundation for Young Scholars of Jiangsu Province(No.BK20220628)the National Natural Science Foundation for Young Scholars of China(52301130)the Changzhou Sci&Tech program(No.GJ20220153)support of the Natural Science Foundation of Jiangsu Provincial Education Department(No.21KJB430001).
文摘Traditional metals often exhibit a trade-offbetween strength and plasticity,limiting their wide application of metals in aerospace,transportation,energy industry and other fields[1-3].In order to overcome this dilemma,high-entropy alloys(HEAs),proposed by Yeh et al.and Cantor et al.,are currently of great interest in the materials community due to their excellent mechanical properties[4-7].To further promote the wide application of HEAs in industrial production,Lu et al.developed a new eutectic high-entropy alloy(EHEAs)by combining the potential advantages of traditional eutectic alloys and HEAs[8-11].
基金financial support from the National Key R&D Program of China(No.2020YFA0405901)the National Natural Science Foundation of China(Nos.52375155 and 51875398).
文摘The study investigated the oxidation behavior of T91 steel modified with Al(T91-Al)and Si(T91-Si)in lead-bismuth eutectic(LBE)at 450℃under oxygen-saturated conditions(10^(−7)-10^(−8)wt.%)and oxygen-controlled conditions(3.2×10^(−4)wt.%).Advanced characterization techniques were employed to under-stand the thermodynamic and kinetic mechanisms of enhanced oxidation properties of the modified T91 steel.The results indicate that the oxidation resistance of the materials follows this order:T91<T91-Al<T91-Si.Noteworthy,the oxidation resistance of T91-Si material exhibited minimal correlation with dissolved oxygen.Under oxygen-controlled conditions,the oxide film of T91 and T91-Al was attacked and broken by LBE,with the former eventually peeling off.In contrast,both materials showed significant ox-ide film thickening,except T91-Si under oxygen-saturated conditions.The addition of Al improved the quality of the inner oxide film on T91-Al by generating Al_(2)O_(3),thereby slowing down the diffusion of Fe from the matrix and enhancing oxidation resistance.Conversely,Si actively participated in the oxidation process of T91-Si,slowing down the diffusion of Fe,and facilitating the diffusion of Cr,thereby strength-ening the oxide film protection.Consequently,the oxide thickness of T91-Si material was only 24%of T91 and 35%of T91-Al under saturated oxygen conditions.
基金supported by the National Natural Science Foundation of China(Nos.22208221,22178221)the Natural Science Foundation of Guangdong Province(Nos.2024A1515011078,2024A1515011507)+1 种基金the Shenzhen Science and Technology Program(Nos.JCYJ20220818095805012,JCYJ20230808105109019)the Start-up Research Funding of Shenzhen University(No.868-000001032522).
文摘The deterioration of aqueous zinc-ion batteries(AZIBs)is confronted with challenges such as unregulated Zn^(2+)diffusion,dendrite growth and severe decay in battery performance under harsh environments.Here,a design concept of eutectic electrolyte is presented by mixing long chain polymer molecules,polyethylene glycol dimethyl ether(PEGDME),with H_(2)O based on zinc trifluoromethyl sulfonate(Zn(OTf)2),to reconstruct the Zn^(2+)solvated structure and in situ modified the adsorption layer on Zn electrode surface.Molecular dynamics simulations(MD),density functional theory(DFT)calculations were combined with experiment to prove that the long-chain polymer-PEGDME could effectively reduce side reactions,change the solvation structure of the electrolyte and priority absorbed on Zn(002),achieving a stable dendrite-free Zn anode.Due to the comprehensive regulation of solvation structure and zinc deposition by PEGDME,it can stably cycle for over 3200 h at room temperature at 0.5 mA/cm^(2)and 0.5 mAh/cm^(2).Even at high-temperature environments of 60℃,it can steadily work for more than 800 cycles(1600 h).Improved cyclic stability and rate performance of aqueous Zn‖VO_(2)batteries in modified electrolyte were also achieved at both room and high temperatures.Beyond that,the demonstration of stable and high-capacity Zn‖VO_(2)pouch cells also implies its practical application.
基金supported by the National Nat-ural Science Foundation of China(Nos.51872238,52074227,and 21806129)the Fundamental Research Funds for the Central Universities,China(Nos.3102018zy045 and 3102019AX11)+2 种基金the Guangdong Basic and Applied Basic Research Foundation,China(No.2024A1515010298)the Natural Science Basic Research Plan in Shaanxi Province of China(Nos.2017JQ5116 and 2020JM-118)the Key Laboratory of Icing and Anti/De-icing of CARDC(No.IADL20220401).
文摘Gels and conductive polymer composites,including hydrogen bonds(HBs),have emerged as promising materials for electro-magnetic wave(EMW)absorption across various applications.However,the relationship between conduction loss in EMW-absorbing materials and charge transfer in HB remains to be fully understood.In this study,we developed a series of deep eutectic gels to fine-tune the quantity of HB by adjusting the molar ratio of choline chloride(ChCl)and ethylene glycol(EG).Owing to the unique properties of deep eutectic gels,the effects of magnetic loss and polarization loss on EMW attenuation can be disregarded.Our results indicate that the quantity of HB initially increases and then decreases with the introduction of EG,with HB-induced conductive loss following similar pat-terns.At a ChCl and EG molar ratio of 2.4,the gel labeled G22-CE2.4 exhibited the best EMW absorption performance,characterized by an effective absorption bandwidth of 8.50 GHz and a thickness of 2.54 mm.This superior performance is attributed to the synergistic ef-fects of excellent conductive loss and impedance matching generated by the optimal number of HB.This work elucidates the role of HB in dielectric loss for the first time and provides valuable insights into the optimal design of supramolecular polymer absorbers.
基金financially supported by the Natural Science Spe-cial(Special Post)Research Foundation of Guizhou University(No.2023-46)the Youth Science and Technology Talent Development Program of Guizhou(No.QKJ[2024]24)the National Natural Science Foundation of China(Nos.52274260,52074096,and 52164017).
文摘Dual-phase heterogeneous structures confer eutectic high-entropy alloy(EHEA)with excellent strength-ductility synergy under quasi-static tensile loading.However,it is questionable whether the EHEAs pos-sess equally good impact toughness because the phase interfaces are vulnerable to crack initiation.This work aimed to study the Charpy impact toughness and fracture behavior of AlCoCrFeNi_(2.1) EHEA.The results indicate that while maintaining high tensile strength and ductility,the AlCoCrFeNi_(2.1) EHEA also shows a satisfactory impact toughness of 25.86 J/cm^(2),superior to most other dual-phase alloys like TC4 titanium alloy or DP steel.Fractography analysis reveals characteristic regions of the fracture surface,which suggests energy absorption mechanisms primarily through ductile dimples,flat cleavage facets,secondary cracks,and microvoids,corresponding to a ductile-brittle mixed fracture mode.Detailed obser-vations of the deformed microstructure through TEM and EBSD demonstrate that FCC(L1_(2))and BCC(B2)phases underwent concurrent tearing along their phase boundaries,indicating a crucial influence of phase boundaries over crack initiation and propagation.The FCC(L1_(2))phase bore almost all plastic deformation of the sample through dislocation slip,whereas the BCC(B2)phase underwent a rapid shearing but almost no dislocation slip.Crack initiation under impact loading typically starts at the FCC(L1_(2))/BCC(B2)inter-face before propagating through the BCC(B2)phase.Additionally,this work further examines the effect of sample size and notch shape on the impact toughness of AlCoCrFeNi_(2.1) EHEA.A comparative analysis of the mechanical behavior under static and impact loading was also conducted,highlighting differences and connections in stress distribution and fracture surface morphology.The study offers valuable insights into the mechanical response and fracture behavior of AlCoCrFeNi_(2.1) EHEA under impact loading,provid-ing crucial information for its potential industrial applications.
基金supported by the Natural Science Foundation of Henan Province(No.242300420021)the Major Science and Technology Projects of Henan Province(No.221100230200)+4 种基金the Open Fund of State Key Laboratory of Advanced Refractories(No.SKLAR202210)the Key Science and Technology Program of Henan Province(No.232102241020)the Undergraduate Innovation and Entrepreneurship Training Program of Henan Province(No.S202310464012)the Ph.D.Research Startup Foundation of Henan University of Science and Technology(No.400613480015)the Postdoctoral Research Startup Foundation of Henan University of Science and Technology(No.400613554001).
文摘Aqueous Zn-ion batteries(AZIBs)have been regarded as promising alternatives to Li-ion batteries due to their advantages,such as low cost,high safety,and environmental friendliness.However,AZIBs face significant challenges in limited stability and lifetime owing to zinc dendrite growth and serious side reactions caused by water molecules in the aqueous electrolyte during cycling.To address these issues,a new eutectic electrolyte based on Zn(ClO_(4))_(2)·6H_(2)O-N-methylacetamide(ZN)is proposed in this work.Compared with aqueous electrolyte,the ZN eutectic electrolyte containing organic N-methylacetamide could regulate the solvated structure of Zn^(2+),effectively suppressing zinc dendrite growth and side reactions.As a result,the Zn//NH4 V4 O10 full cell with the eutectic ZN-1-3 electrolyte demonstrates significantly enhanced cycling stability after 1000 cycles at 1 A g^(-1).Therefore,this study not only presents a new eutectic electrolyte for zinc-ion batteries but also provides a deep understanding of the influence of Zn^(2+)solvation structure on the cycle stability,contributing to the exploration of novel electrolytes for high-performance AZIBs.
基金supported by the National Key Re-search and Development Program of China(No.2024YFC2816500)the National Natural Science Foundation of China(Nos.U2341261 and 52471121)the Fundamental Research Funds for the Cen-tral Universities(No.DUT24RC(3)107).
文摘Developing high-strength and ductile metallic parts with designable shapes is an unfading research topic for material science and engineering.As a revolutionary technology,additive manufacturing(AM)pro-vides a new pathway for producing complex-shaped metallic parts with the possibility of in situ tailoring their microstructure.However,AM is not always ideally applicable for all metals and alloys.Eutectic high entropy alloys(EHEAs)contain both the advantages of the eutectic alloys and high entropy alloys(HEAs),and EHEAs show significant potential in AM due to their excellent mechanical properties and good fluid-ity.Herein,heterogeneous and ultra-fine eutectic lamellar microstructure with directional growth along the deposition direction(DD)was obtained by adjusting the process parameters of AM to improve the strength and ductility of EHEAs.Compared with the as-cast sample,the simultaneous increment in both strength and ductility is achieved by AM.Combination of strength and ductility of the AM sample ten-sile along the DD direction(yield strength σ_(y)=1115 MPa,ultimate tensile strength σ_(UTS)=1417 MPa,ultimate tensile strain ε_(U)=23%)in this work was superior to most of the additive manufactured al-loys and comparable to the thermomechanical-treated EHEAs with the best mechanical properties.The high strength and good ductility of the AM were mainly attributed to the ultra-fine lamellar nature and fully constrained soft and hard lamellar microstructure,which produces an obvious hetero-deformation induced(HDI)strengthening and high crack buffering effect during the deformation.This work provides a new possibility to achieve high strength and ductile complex-shaped metallic parts via designing direc-tional lamellar eutectic structures by AM.
