Copolymerization is a commonly employed method for optimizing the properties of polymer materials.Incorporating ether segments into polyesters main chain to obtain polyether-polyester copolymers is an effective strate...Copolymerization is a commonly employed method for optimizing the properties of polymer materials.Incorporating ether segments into polyesters main chain to obtain polyether-polyester copolymers is an effective strategy to realize the integration of multiple properties of polyester and polyether,and to develop more high-performance,multi-purpose polymer materials.Herein,the synthesis of poly(ether-ester)s is accessible by employing the biphenyl-linked heterodinuclear salen Cr-AI complex in the presence of PPNCI for the copolymerization of epoxides and£-caprolactone(CL).Monitoring the copolymerization process reveals that catalyst 1 exhibited good performance for the copolymerization of epoxides and CL,affording copolymers with a gradient sequence structure.The dynamic thermomechanical analysis(DMA)study indicates the obtained poly(ether-ester)s possess enhanced flexibility compared with the block copolymers or blend of PPO and PCL homopolymers with the same ratio.This study provides a theoretical basis for the preparation of high-performance polymer materials.展开更多
The ring-opening alternating copolymerization(ROAC)of 3,4-dihydrocoumarin(DHC)/epoxides has been successfully developed using an imidazolium salt of 1-ethyl-3-methylimidazolium chloride(EMIMCl)as a catalyst.The result...The ring-opening alternating copolymerization(ROAC)of 3,4-dihydrocoumarin(DHC)/epoxides has been successfully developed using an imidazolium salt of 1-ethyl-3-methylimidazolium chloride(EMIMCl)as a catalyst.The resulting copolymer has a molecular weight of 13.7kg·mol^(-1),a narrow molecular weight distribution of 1.03 and a strictly alternating structure.The MALDI-TOF MS characterization and DFT calculations including electrostatic potential(ESP),hydrogen-atom abstraction(HAA),independent gradient model based on hirshfeld partition(IGMH)and atoms-in-molecules(AIM)analysis were used to investigate the metal-free catalytic process.The synergistic effect of anions and cations of EMIMCl for ROAC of DHC and epoxides was demonstrated.This study provides a metal-free catalytic system for the facile synthesis of alternating polyesters from DHC.展开更多
The asymmetric alternating copolymerization of meso-epoxide and cyclic anhydrides provides an efficient access to enantiopure polyesters.Contrary to the extensive investigation of the stereochemistry resulting from ep...The asymmetric alternating copolymerization of meso-epoxide and cyclic anhydrides provides an efficient access to enantiopure polyesters.Contrary to the extensive investigation of the stereochemistry resulting from epoxide building block,the chirality from anhydride and the configurational match with epoxide remain elusive.Herein,we discover that the bimetallic chromium catalysts have led to an obvious enhancement in terms of reactivity and enantioselectivity for the asymmetric copolymerization of meso-epoxide with various non-symmetric chiral anhydrides.Up to 97%ee was obtained during the asymmetric copolymerization of cyclohexene oxide(CHO)with(R)-methylsuccinic anhydride(R-MSA),and three-or four-carbon chiral centers were simultaneously installed in the aliphatic polyester backbone.In particular,the different combinations of stereochemistry in epoxide and anhydride building blocks considerably affect the thermal properties and crystalline behaviors of the resulting polyesters.This study uncovers an interesting method for regulating polymer crystallinity via matching the chirality of different monomers.展开更多
Introducing functional polar groups into polyolefins can significantly improve the material properties,but there are still challenges in achieving this goal,with the core difficulty being that polar groups are prone t...Introducing functional polar groups into polyolefins can significantly improve the material properties,but there are still challenges in achieving this goal,with the core difficulty being that polar groups are prone to interact with metal active species,affecting the efficiency of the copolymerization.With the rapid advancement in catalyst,a variety of copolymerization strategies are developed aimed at producing more versatile polyolefin materials.Although early transition metal catalysts play an indispensable role in the traditional polyolefin industry,their inherent strong oxophilicity becomes a significant constraint in copolymerization involving polar olefins,limiting their application scope.This review summarizes the progress made in recent years in the efficient copolymerization of non-polar olefins with polar comonomers catalyzed by groups 3 and 4 single-site catalysts.We classify the catalysts into four categories,Sc-,Ti-,Zr-,Hf-,based on the type of metal centers,and provide insights into the influence of catalyst structures and the type of comonomers on the copolymerization behavior.The introduction of polar monomers fundamentally improves the comprehensive performance of the products,greatly broadens the application scope of polyolefin materials,and meets the growing market demand for multifunctional and high-performance materials.展开更多
Bonded type RE3+ doped luminescent co-polymer was synthesized by solution free radical copolymerization. The influence of charge sequence, monomers and co-polymerized method on properties and structures of the co-poly...Bonded type RE3+ doped luminescent co-polymer was synthesized by solution free radical copolymerization. The influence of charge sequence, monomers and co-polymerized method on properties and structures of the co-polymers was studied. The emission intensity of the co-polymers at different RE3+ concentrations was tested. The results showed that the co-polymers of Eu-PSt and Eu-PMMA both had wide absorption peak at 200-400 nm and the strongest peak appeared at 235 nm. The fluorescent intensity of Eu3+ doped polystyrene co-polymer was stronger than that of Eu3+ doped PMMA copolymer. The characteristic emission of europium ions was observed in the co-polymers. The copolymer doped with rare earth elements showed the 'sensitization effect' for the central ions. The bonded-type rare earth copolymer not only enhanced the energy transfer efficiency, but also improved the fluorescence intensity by increasing the rigidity of main and side chain.展开更多
Miniemulsion copolymerization of butyl mathacrylate （BMA） with fluoroacrylate （HFMA, TFMA） was carried out at 70 ℃ by employing potassium persulphate （KPS） as initiator. Copolymer compositions at low conversion...Miniemulsion copolymerization of butyl mathacrylate （BMA） with fluoroacrylate （HFMA, TFMA） was carried out at 70 ℃ by employing potassium persulphate （KPS） as initiator. Copolymer compositions at low conversion levels were determined by ^1H NMR spectra techniques. The reactivity ratios were evaluated by employing Kellen-Tudos （K-T） methods, which yields the apparent reactivity ratios, rBMA = 0.74, rHFMA = 0.87 and rBMA = 0.73, rTFMA = 0.75, respectively, and Q- and e-values of HFMA and TFMA were calculated by the Alfrey-Price method. The results show that HFMA and TFMA are more active than BMA, and the cross-propagation rate constant is greater than the self-propagation one in these two copolymerizations.展开更多
In this paper, the capabilities of grafting acrylonitrile (AN) onto starch initiated by Fe(III)-TU, V(V)-TU, Cr(VI)-TU, Mn(VII)-TU redox systems were compared in the presence of sulfuric acid of different concentratio...In this paper, the capabilities of grafting acrylonitrile (AN) onto starch initiated by Fe(III)-TU, V(V)-TU, Cr(VI)-TU, Mn(VII)-TU redox systems were compared in the presence of sulfuric acid of different concentrations. It was shown that the grafting capability of Mn(VII)-TU is the highest in these initiating systems. Using Mn (VII-TU as initiator, the effects of various acids (HClO4, H2SO4, HNO3, HCl) on the graft copolymerization of acrylonitrile onto starch were discussed, and the capabilities of graft copolymerization of methyl methacrylate (MMA), acrylamide (AM), acrylic acid (AA) onto starch were investigated. The experimental results show that the order of the influences of different acids is HClO4 > H2SO4 > HNO3 > HCl, and the order of grafting capabilities of different monomers grafted onto starch is MMA > AN > AM > AA. The structure and morphology of graft, copolymers were studied with infrared spectroscopy and scanning electron microscopy. The size, shape and roughness of surface of the grafted starch granules are changed after grafting.展开更多
Rare-earth ternary catalysts Y（CCl3COO）3-ZnR2-glycerin were prepared for the copolymerization of carbon dioxide and propylene oxide （PO）, where dialkylzincs （ZnR2） were diethylzinc, di（n-propyl）zinc, di（n-bu...Rare-earth ternary catalysts Y（CCl3COO）3-ZnR2-glycerin were prepared for the copolymerization of carbon dioxide and propylene oxide （PO）, where dialkylzincs （ZnR2） were diethylzinc, di（n-propyl）zinc, di（n-butyl）zinc, di（i-propyl）zinc, di（i-butyl）zinc, di（s-butyl）zinc,respectively. The Y（CCl3COO）3-ZnR2-glycerin catalysts displayed the highest catalytic activity at the molar ratio of Y（CCl3COO）3：ZnR2：glycerin = 1：20：10. In the same copolymerization condition, catalysts containing dialkylzincs with branched alkyl group showed lower catalytic activity than that with primary alkyl group. For those catalysts including dialkylzincs with primary alkyl group, their catalytic activity decreases with increasing number of carbon atom in the alkyl group with the following sequence： Y（CCl3COO）3-ZnEt2-glycerin 〉 Y（CCl3COO）3-Zn（n- Pr）2-glycerin〉Y（CCl3COO）3-Zn（n-Bu）2-glycerin. However, the alkyl group in the dialkylzinc does not influence the insertion of PO into the propagation chain end.展开更多
In this study,novel electrochromic copolymers of 3,4-ethylenedioxythiophene(EDOT)and(E)-1,2-bis(2-fluoro-4-(4-hexylthiophen-2-yl)phenyl)diazene(M1)with different monomer feed ratios were designed and synthesized elect...In this study,novel electrochromic copolymers of 3,4-ethylenedioxythiophene(EDOT)and(E)-1,2-bis(2-fluoro-4-(4-hexylthiophen-2-yl)phenyl)diazene(M1)with different monomer feed ratios were designed and synthesized electrochemically.Electrochemical and spectroelectrochemical characterizations were performed using voltammetry and UV-Vis-NIR spectrophotometry techniques to test the applicability of copolymers for electrochromic applications.In terms of electrochemical behaviors,addition of an electron-rich EDOT unit into the azobenzenecontaining copolymer increased the electron density on the polymer chain and afforded copolymers with very low oxidation potentials at around0.30 V.While the homopolymers(P1 and PEDOT)exhibited neutral state absorptions centered at 510 and 583 nm,EDOT-bearing copolymers showed red shifted absorptions compared to those of P1 with narrower optical band gaps.In addition,the poor optical contrast and switching times of azobenzene-bearing homopolymer were significantly improved with EDOT addition into the copolymer chain.As a result of the promising electrochromic and kinetic preperties,Co P1.5-bearing single layer electrochromic device that works between purple and light greenish blue colors was constructed and characterized.展开更多
Emulsion copolymerization of styrene and ethylene catalyzed by a series of neutral nickel(Ⅱ) complexes was carried out in an aqueous system to give high-molecular-weight copolymers.The copolymers and emulsions were c...Emulsion copolymerization of styrene and ethylene catalyzed by a series of neutral nickel(Ⅱ) complexes was carried out in an aqueous system to give high-molecular-weight copolymers.The copolymers and emulsions were characterized by an array of techniques including NMR,GPC,TEM,WAXD and DSC.The results indicate that the copolymers obtained are mostly block copolymers of polyethylene with random insertion of styrene units,and their M_W is in the range of 10~5-10~6.By enhancing the electron withdrawing of the s...展开更多
Copolymerization of styrene (St) with N-phenylmaleimide (NPMI) was studied with rare earth coordination catalyst Nd(naph)3-AlEt3 in toluene. Characterization of the copolymers showed that the copolymers possess an al...Copolymerization of styrene (St) with N-phenylmaleimide (NPMI) was studied with rare earth coordination catalyst Nd(naph)3-AlEt3 in toluene. Characterization of the copolymers showed that the copolymers possess an alternating structure.展开更多
Polyesters,as a class of high-performance and versatile polymer materials,often suffer from some drawbacks,such as hydrophobicity and brittleness due to their single structure nature.Thus,modifications have attracted ...Polyesters,as a class of high-performance and versatile polymer materials,often suffer from some drawbacks,such as hydrophobicity and brittleness due to their single structure nature.Thus,modifications have attracted much attention for enhancing their desirable properties,of which one efficient way is incorporating the aliphatic polyether segment into the main chain of the polyester.However,this approach is of much challenge because the obtained polyesters are problematic in either low alternating degree or low molecular weight.Herein,we describe an efficient strategy to incorporate polyether fragment into polyester by developing a novel Co-Al based heterodinuclear complex for mediating the copolymerization of propylene oxide(PO)withε-caprolactone(CL).The tracking experiments reveal that PO and CL convert into the polymer chain throughout the polymerization process.Especially,the linear increase in the molecular weight with conversion of CL indicates the controllable nature of the copolymerization.The competition polymerization,offering the monomer reactivity ratios of rCL=0.96 and rPO=1.04,suggests that the tendency of self-propagation or incorporation of monomers is nearly identical.interestingly,the obtained polymers with different ether contents exhibit tunable thermal properties with enhanced decomposition temperature for the polymer with higher ether content.The newly developed heterodinuclear complex for new polymerization provides an idea to synthesize new functional polymeric materials.展开更多
In combination with methyllithium,a 2,6-bis(amino)phenol zinc complex 1 was used in the ring-opening polymerization ofδ-valerolactone in the absence or presence of benzyl alcohol and showed high efficiency,mainly pro...In combination with methyllithium,a 2,6-bis(amino)phenol zinc complex 1 was used in the ring-opening polymerization ofδ-valerolactone in the absence or presence of benzyl alcohol and showed high efficiency,mainly producing cyclic and linear polyvalerolactones,respectively.On the basis of homopolymerization,the ring-opening copolymerization ofε-caprolactone andδ-valerolactone was investigated.The P(CL-co-VL)random copolymers,PCL-b-PVL and PVL-b-PCL diblock copolymers,were prepared by varying the feeding strategy(premixing or sequential feeding).The copolymer composition was adjusted by varying the feeding ratio of two monomers.The structure and thermal properties of obtained polymers were characterized by GPC,1 H-NMR,13 C-NMR,MALDI-TOF mass spectroscopy,and DSC,respectively.展开更多
The monodispersed polymeric particles with an unusual structure were prepared by the dispersion copolymerization of acrylonitrile/styrene（AN/St） in mixed solvents of ethanol/water by using the poly（N-isopropylacryl...The monodispersed polymeric particles with an unusual structure were prepared by the dispersion copolymerization of acrylonitrile/styrene（AN/St） in mixed solvents of ethanol/water by using the poly（N-isopropylacrylamide） （PNIPAAm） macromonomer as a reaction stabilizer. It was found that the AN monomer plays a key role in the formation of the particles with special morphology analyzed via scanning electron microscopy （SEM）. The reaction parameters have remarkable influences on the particle size and morphology. The particles possess a thermosensitive property according to the result of laser light scattering（LLS）.展开更多
i-PP/m-EPR reactor alloy were prepared through ethylene/propylene slurry copolymerization catalyzed by metallocene(rac-Et(Ind)_2ZrCl_2)supported on porous iPP particles.Polar monomer(dihydromyrcene alcohol)treated wit...i-PP/m-EPR reactor alloy were prepared through ethylene/propylene slurry copolymerization catalyzed by metallocene(rac-Et(Ind)_2ZrCl_2)supported on porous iPP particles.Polar monomer(dihydromyrcene alcohol)treated with triethyaluminum was added in the preparation of porous iPP particles to introduce hydroxyl groups and thus enhance the ability for chemically supporting the metallocene catalyst.The effects of MAO/Zr ratio and monomer composition in feed on the reaction activity and property of polymer were i...展开更多
The surface of polypropylene （iPP） is modified with glow discharge plasma of Ar, so that the modified surfaces of iPP films are obtained. The studies of scanning electron microscopy （SEM） show the surface etching ...The surface of polypropylene （iPP） is modified with glow discharge plasma of Ar, so that the modified surfaces of iPP films are obtained. The studies of scanning electron microscopy （SEM） show the surface etching pattern of iPP films. The chemical structures of iPP films are confirmed by X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared （FTIR） spectroscopy. The wetting properties of modified surfaces of iPP films are characterized by contact angle, and the free energy of surfaces is calculated. The free radical of modification surfaces of iPP is measured by chemical method. The surfaces of iPP are achieved with Ar plasma treatment followed by grafting copolymerization with styrene （St） in St. The grafting polymer of St onto iPP is characterized by FTIR. The grafting rate is dependent on plasma exposure time and discharge voltage. The studies show that homopolymerization of St is undergone at the sane time during the graftingcopolymerization of St onto/PP.展开更多
2,2,3,3,4,4,5,5-Octafluoropentyl acrylate was grafted onto silk fiber in a two-step heterogeneous system through the vinyl bonds of acryloyloxyethyl isocyanate modified on the silk.The grafted copolylner was analyzed ...2,2,3,3,4,4,5,5-Octafluoropentyl acrylate was grafted onto silk fiber in a two-step heterogeneous system through the vinyl bonds of acryloyloxyethyl isocyanate modified on the silk.The grafted copolylner was analyzed by FTIR and WAXD,and the results revealed that the fluoroacrylate was successfully grafted onto silk fiber and the crystalline structure of silk fibroin withβ-sheet structure was not changed after graft copolymerization.The FT-IR corrected method was used to simulate the grafting yield onto sil...展开更多
FTIR spectroscopy in combination with a diamond tipped attenuated total reflectance （ATR） immersion probe was utilized to study in situ the copolymerization of butadiene （Bd） and isoprene （Ip） with neodymium-bas...FTIR spectroscopy in combination with a diamond tipped attenuated total reflectance （ATR） immersion probe was utilized to study in situ the copolymerization of butadiene （Bd） and isoprene （Ip） with neodymium-based catalyst in hexane. The relationship between the signal intensity of monomer and its concentration was investigated. The kinetic study of copolymerization of Bd and Ip was further conducted, and the monomer reactivity ratios were determined via in situ ATR FTIR. The signal band at 1010 cm^-1 was assigned to wagging vibration of Bd and its intensity was proportional to Bd concentration （[Bd]） in the range of 0.46-3.88 mol.L^-1. The signal bands at 890 and 989 cm^-1 were assigned to wagging vibration of Ip and the signal intensity was also proportional to Ip concentration （[Ip]） in the range of 0.08-4.73 mol·L^-1 at 890 cm^-1 and 0.08-7.49 mol·L^-1 at 989 cm^-1, respectively. Thus the signal band at 1010 cm^-1 was chosen to monitor Bd concentration and bands at 989 and 890 cm^-1 to monitor Ip concentration during the copolymerization, respectively. It was demonstrated that the conversions of Bd and Ip calculated from FTIR data agreed very well with those obtained gravimetrically. The poiymerization rates were first order with respect to both [Bd] and [Ip], respectively at different polymerization temperatures. The apparent propagation activation energy for Bd and Ip could be determined to be 54.4 kJ·mol^-1 and 57.7 kJ·mol^-1, respectively. The monomer reactivity ratios were calculated to be 1.08 for Bd （rBd） and 0.48 for IP （rIp） based on FTIR data. The Bd-Ip copolymer products with random sequence could be obtained with only one glass transition temperature.展开更多
Lignin isolated from enzymatic hydrolyzed corn-stalks (EH-lignin) is a renewable natural polymer noted for its versatility and applicability in a vari-ety of uses. Graft copolymerization of EH-lignin with acrylamide (...Lignin isolated from enzymatic hydrolyzed corn-stalks (EH-lignin) is a renewable natural polymer noted for its versatility and applicability in a vari-ety of uses. Graft copolymerization of EH-lignin with acrylamide (AM) and the application of this copolymer as a flocculant in dye wastewater treatment were studied in this article. The influ-ences of some factors on yield of copolymer and the grafting ratio were investigated and the structure of EH-lignin/AM graft copolymer was characterized by FT-IR. According to the yield and the grafting ratio, the optimum conditions for graft copolymerization were as follows: initiator K2S2O8-Na2S2O3 with a quantity 3 wt% of EH-lignin, mass ratio of AM to EH-lignin was 2~3, reaction time 4h and temperature at 50℃. It was found that the absorption capacity of graft copolymer to two azo-dyes was enhanced with the increase of grafting ratio. Furthermore, the residue concen-tration of EH-lignin/AM graft copolymer remained in the supernatant after flocculation was much lower than that of pure EH-lignin.展开更多
The catalytic activity of poly（styrene-acrylic acid） （PSAA） supported neodymium chloride （NdCl3） complex for the copolymerization of styrene and 4-Vinylpyridine was studied. The influence of various factors, suc...The catalytic activity of poly（styrene-acrylic acid） （PSAA） supported neodymium chloride （NdCl3） complex for the copolymerization of styrene and 4-Vinylpyridine was studied. The influence of various factors, such as Al/Nd molar ratio, reaction time, macromolecular carder （PSAA）, and ratio of styrene to 4-vinypyridine （g/g）, on the copolymerization yield of styrene and 4-Vinylpyridine was investigated. The results showed that the copolymerization of polar monomers with olefins occurred efficiently and the catalytic activity of polymer-supported catalyst was higher than that of the similar small molecular catalysts. The activity of PSAA.Nd complex increased with in- creasing Al/Nd molar ratios and decreased with increasing polymerization time. The highest activity of PSAA＇Nd was observed at 120 min, and the highest yield was found at the ratio of styrene to 4-vinylpyridine of 4：2. DSC analysis presented that the resulted polymer had only one glass transition temperature, and showed very good thermal stability.展开更多
基金the National Natural Science Foundation of China(Nos.21722402 and 21674015).
文摘Copolymerization is a commonly employed method for optimizing the properties of polymer materials.Incorporating ether segments into polyesters main chain to obtain polyether-polyester copolymers is an effective strategy to realize the integration of multiple properties of polyester and polyether,and to develop more high-performance,multi-purpose polymer materials.Herein,the synthesis of poly(ether-ester)s is accessible by employing the biphenyl-linked heterodinuclear salen Cr-AI complex in the presence of PPNCI for the copolymerization of epoxides and£-caprolactone(CL).Monitoring the copolymerization process reveals that catalyst 1 exhibited good performance for the copolymerization of epoxides and CL,affording copolymers with a gradient sequence structure.The dynamic thermomechanical analysis(DMA)study indicates the obtained poly(ether-ester)s possess enhanced flexibility compared with the block copolymers or blend of PPO and PCL homopolymers with the same ratio.This study provides a theoretical basis for the preparation of high-performance polymer materials.
基金financially supported by the National Natural Science Foundation of China(No.22161040)Natural Science Foundation of Gansu(No.24JRRA125)Science Research Project of Northwest Normal University(No.NWNU-LKZD2021-3)。
文摘The ring-opening alternating copolymerization(ROAC)of 3,4-dihydrocoumarin(DHC)/epoxides has been successfully developed using an imidazolium salt of 1-ethyl-3-methylimidazolium chloride(EMIMCl)as a catalyst.The resulting copolymer has a molecular weight of 13.7kg·mol^(-1),a narrow molecular weight distribution of 1.03 and a strictly alternating structure.The MALDI-TOF MS characterization and DFT calculations including electrostatic potential(ESP),hydrogen-atom abstraction(HAA),independent gradient model based on hirshfeld partition(IGMH)and atoms-in-molecules(AIM)analysis were used to investigate the metal-free catalytic process.The synergistic effect of anions and cations of EMIMCl for ROAC of DHC and epoxides was demonstrated.This study provides a metal-free catalytic system for the facile synthesis of alternating polyesters from DHC.
基金financially supported by the National Natural Science Foundation of China(Nos.22071016 and 21920102006)。
文摘The asymmetric alternating copolymerization of meso-epoxide and cyclic anhydrides provides an efficient access to enantiopure polyesters.Contrary to the extensive investigation of the stereochemistry resulting from epoxide building block,the chirality from anhydride and the configurational match with epoxide remain elusive.Herein,we discover that the bimetallic chromium catalysts have led to an obvious enhancement in terms of reactivity and enantioselectivity for the asymmetric copolymerization of meso-epoxide with various non-symmetric chiral anhydrides.Up to 97%ee was obtained during the asymmetric copolymerization of cyclohexene oxide(CHO)with(R)-methylsuccinic anhydride(R-MSA),and three-or four-carbon chiral centers were simultaneously installed in the aliphatic polyester backbone.In particular,the different combinations of stereochemistry in epoxide and anhydride building blocks considerably affect the thermal properties and crystalline behaviors of the resulting polyesters.This study uncovers an interesting method for regulating polymer crystallinity via matching the chirality of different monomers.
基金supported by the National Natural Science Foundation of China(No.U23B6011)。
文摘Introducing functional polar groups into polyolefins can significantly improve the material properties,but there are still challenges in achieving this goal,with the core difficulty being that polar groups are prone to interact with metal active species,affecting the efficiency of the copolymerization.With the rapid advancement in catalyst,a variety of copolymerization strategies are developed aimed at producing more versatile polyolefin materials.Although early transition metal catalysts play an indispensable role in the traditional polyolefin industry,their inherent strong oxophilicity becomes a significant constraint in copolymerization involving polar olefins,limiting their application scope.This review summarizes the progress made in recent years in the efficient copolymerization of non-polar olefins with polar comonomers catalyzed by groups 3 and 4 single-site catalysts.We classify the catalysts into four categories,Sc-,Ti-,Zr-,Hf-,based on the type of metal centers,and provide insights into the influence of catalyst structures and the type of comonomers on the copolymerization behavior.The introduction of polar monomers fundamentally improves the comprehensive performance of the products,greatly broadens the application scope of polyolefin materials,and meets the growing market demand for multifunctional and high-performance materials.
基金Project supported by the Special Funds for Major State Research Projectsthe National Natural Science Foundation of China (50373034)
文摘Bonded type RE3+ doped luminescent co-polymer was synthesized by solution free radical copolymerization. The influence of charge sequence, monomers and co-polymerized method on properties and structures of the co-polymers was studied. The emission intensity of the co-polymers at different RE3+ concentrations was tested. The results showed that the co-polymers of Eu-PSt and Eu-PMMA both had wide absorption peak at 200-400 nm and the strongest peak appeared at 235 nm. The fluorescent intensity of Eu3+ doped polystyrene co-polymer was stronger than that of Eu3+ doped PMMA copolymer. The characteristic emission of europium ions was observed in the co-polymers. The copolymer doped with rare earth elements showed the 'sensitization effect' for the central ions. The bonded-type rare earth copolymer not only enhanced the energy transfer efficiency, but also improved the fluorescence intensity by increasing the rigidity of main and side chain.
基金supported by National Natural Science Foundation of China(Nos.20576117 and 20806067)China Postdoctoral Science Foundation(No.20070420230).
文摘Miniemulsion copolymerization of butyl mathacrylate （BMA） with fluoroacrylate （HFMA, TFMA） was carried out at 70 ℃ by employing potassium persulphate （KPS） as initiator. Copolymer compositions at low conversion levels were determined by ^1H NMR spectra techniques. The reactivity ratios were evaluated by employing Kellen-Tudos （K-T） methods, which yields the apparent reactivity ratios, rBMA = 0.74, rHFMA = 0.87 and rBMA = 0.73, rTFMA = 0.75, respectively, and Q- and e-values of HFMA and TFMA were calculated by the Alfrey-Price method. The results show that HFMA and TFMA are more active than BMA, and the cross-propagation rate constant is greater than the self-propagation one in these two copolymerizations.
文摘In this paper, the capabilities of grafting acrylonitrile (AN) onto starch initiated by Fe(III)-TU, V(V)-TU, Cr(VI)-TU, Mn(VII)-TU redox systems were compared in the presence of sulfuric acid of different concentrations. It was shown that the grafting capability of Mn(VII)-TU is the highest in these initiating systems. Using Mn (VII-TU as initiator, the effects of various acids (HClO4, H2SO4, HNO3, HCl) on the graft copolymerization of acrylonitrile onto starch were discussed, and the capabilities of graft copolymerization of methyl methacrylate (MMA), acrylamide (AM), acrylic acid (AA) onto starch were investigated. The experimental results show that the order of the influences of different acids is HClO4 > H2SO4 > HNO3 > HCl, and the order of grafting capabilities of different monomers grafted onto starch is MMA > AN > AM > AA. The structure and morphology of graft, copolymers were studied with infrared spectroscopy and scanning electron microscopy. The size, shape and roughness of surface of the grafted starch granules are changed after grafting.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.20025414 and 50003009).
文摘Rare-earth ternary catalysts Y（CCl3COO）3-ZnR2-glycerin were prepared for the copolymerization of carbon dioxide and propylene oxide （PO）, where dialkylzincs （ZnR2） were diethylzinc, di（n-propyl）zinc, di（n-butyl）zinc, di（i-propyl）zinc, di（i-butyl）zinc, di（s-butyl）zinc,respectively. The Y（CCl3COO）3-ZnR2-glycerin catalysts displayed the highest catalytic activity at the molar ratio of Y（CCl3COO）3：ZnR2：glycerin = 1：20：10. In the same copolymerization condition, catalysts containing dialkylzincs with branched alkyl group showed lower catalytic activity than that with primary alkyl group. For those catalysts including dialkylzincs with primary alkyl group, their catalytic activity decreases with increasing number of carbon atom in the alkyl group with the following sequence： Y（CCl3COO）3-ZnEt2-glycerin 〉 Y（CCl3COO）3-Zn（n- Pr）2-glycerin〉Y（CCl3COO）3-Zn（n-Bu）2-glycerin. However, the alkyl group in the dialkylzinc does not influence the insertion of PO into the propagation chain end.
文摘In this study,novel electrochromic copolymers of 3,4-ethylenedioxythiophene(EDOT)and(E)-1,2-bis(2-fluoro-4-(4-hexylthiophen-2-yl)phenyl)diazene(M1)with different monomer feed ratios were designed and synthesized electrochemically.Electrochemical and spectroelectrochemical characterizations were performed using voltammetry and UV-Vis-NIR spectrophotometry techniques to test the applicability of copolymers for electrochromic applications.In terms of electrochemical behaviors,addition of an electron-rich EDOT unit into the azobenzenecontaining copolymer increased the electron density on the polymer chain and afforded copolymers with very low oxidation potentials at around0.30 V.While the homopolymers(P1 and PEDOT)exhibited neutral state absorptions centered at 510 and 583 nm,EDOT-bearing copolymers showed red shifted absorptions compared to those of P1 with narrower optical band gaps.In addition,the poor optical contrast and switching times of azobenzene-bearing homopolymer were significantly improved with EDOT addition into the copolymer chain.As a result of the promising electrochromic and kinetic preperties,Co P1.5-bearing single layer electrochromic device that works between purple and light greenish blue colors was constructed and characterized.
文摘Emulsion copolymerization of styrene and ethylene catalyzed by a series of neutral nickel(Ⅱ) complexes was carried out in an aqueous system to give high-molecular-weight copolymers.The copolymers and emulsions were characterized by an array of techniques including NMR,GPC,TEM,WAXD and DSC.The results indicate that the copolymers obtained are mostly block copolymers of polyethylene with random insertion of styrene units,and their M_W is in the range of 10~5-10~6.By enhancing the electron withdrawing of the s...
基金This project was supported by the National Natural Science Foundation of China. (No.29974024,20254001)
文摘Copolymerization of styrene (St) with N-phenylmaleimide (NPMI) was studied with rare earth coordination catalyst Nd(naph)3-AlEt3 in toluene. Characterization of the copolymers showed that the copolymers possess an alternating structure.
基金the National Natural Science Foundation of China(Nos.21722402 and 21674015)the Fundamental Research Funds for the Central Universities(No.DUT18ZD105).
文摘Polyesters,as a class of high-performance and versatile polymer materials,often suffer from some drawbacks,such as hydrophobicity and brittleness due to their single structure nature.Thus,modifications have attracted much attention for enhancing their desirable properties,of which one efficient way is incorporating the aliphatic polyether segment into the main chain of the polyester.However,this approach is of much challenge because the obtained polyesters are problematic in either low alternating degree or low molecular weight.Herein,we describe an efficient strategy to incorporate polyether fragment into polyester by developing a novel Co-Al based heterodinuclear complex for mediating the copolymerization of propylene oxide(PO)withε-caprolactone(CL).The tracking experiments reveal that PO and CL convert into the polymer chain throughout the polymerization process.Especially,the linear increase in the molecular weight with conversion of CL indicates the controllable nature of the copolymerization.The competition polymerization,offering the monomer reactivity ratios of rCL=0.96 and rPO=1.04,suggests that the tendency of self-propagation or incorporation of monomers is nearly identical.interestingly,the obtained polymers with different ether contents exhibit tunable thermal properties with enhanced decomposition temperature for the polymer with higher ether content.The newly developed heterodinuclear complex for new polymerization provides an idea to synthesize new functional polymeric materials.
基金financially supported by the National Key R&D Program of China (No. 2016YFC1100801)the State Key Laboratory of Chemical Engineering (No. SKL-ChE-18D01)
文摘In combination with methyllithium,a 2,6-bis(amino)phenol zinc complex 1 was used in the ring-opening polymerization ofδ-valerolactone in the absence or presence of benzyl alcohol and showed high efficiency,mainly producing cyclic and linear polyvalerolactones,respectively.On the basis of homopolymerization,the ring-opening copolymerization ofε-caprolactone andδ-valerolactone was investigated.The P(CL-co-VL)random copolymers,PCL-b-PVL and PVL-b-PCL diblock copolymers,were prepared by varying the feeding strategy(premixing or sequential feeding).The copolymer composition was adjusted by varying the feeding ratio of two monomers.The structure and thermal properties of obtained polymers were characterized by GPC,1 H-NMR,13 C-NMR,MALDI-TOF mass spectroscopy,and DSC,respectively.
文摘The monodispersed polymeric particles with an unusual structure were prepared by the dispersion copolymerization of acrylonitrile/styrene（AN/St） in mixed solvents of ethanol/water by using the poly（N-isopropylacrylamide） （PNIPAAm） macromonomer as a reaction stabilizer. It was found that the AN monomer plays a key role in the formation of the particles with special morphology analyzed via scanning electron microscopy （SEM）. The reaction parameters have remarkable influences on the particle size and morphology. The particles possess a thermosensitive property according to the result of laser light scattering（LLS）.
基金National Basic Research Program of China(No.2005CB623804)the National Natural Science Foundation of China(No.20476090).
文摘i-PP/m-EPR reactor alloy were prepared through ethylene/propylene slurry copolymerization catalyzed by metallocene(rac-Et(Ind)_2ZrCl_2)supported on porous iPP particles.Polar monomer(dihydromyrcene alcohol)treated with triethyaluminum was added in the preparation of porous iPP particles to introduce hydroxyl groups and thus enhance the ability for chemically supporting the metallocene catalyst.The effects of MAO/Zr ratio and monomer composition in feed on the reaction activity and property of polymer were i...
基金financially supported by the National Natural Science Foundation of China(No.50673073)the Doctoral Foundation of Ministry of Education of China(No.20060056043)
文摘The surface of polypropylene （iPP） is modified with glow discharge plasma of Ar, so that the modified surfaces of iPP films are obtained. The studies of scanning electron microscopy （SEM） show the surface etching pattern of iPP films. The chemical structures of iPP films are confirmed by X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared （FTIR） spectroscopy. The wetting properties of modified surfaces of iPP films are characterized by contact angle, and the free energy of surfaces is calculated. The free radical of modification surfaces of iPP is measured by chemical method. The surfaces of iPP are achieved with Ar plasma treatment followed by grafting copolymerization with styrene （St） in St. The grafting polymer of St onto iPP is characterized by FTIR. The grafting rate is dependent on plasma exposure time and discharge voltage. The studies show that homopolymerization of St is undergone at the sane time during the graftingcopolymerization of St onto/PP.
基金the National Natural Science Foundation of China (No.50673071).
文摘2,2,3,3,4,4,5,5-Octafluoropentyl acrylate was grafted onto silk fiber in a two-step heterogeneous system through the vinyl bonds of acryloyloxyethyl isocyanate modified on the silk.The grafted copolylner was analyzed by FTIR and WAXD,and the results revealed that the fluoroacrylate was successfully grafted onto silk fiber and the crystalline structure of silk fibroin withβ-sheet structure was not changed after graft copolymerization.The FT-IR corrected method was used to simulate the grafting yield onto sil...
基金supported by the National 863 program(No.2006AA03Z552)the National Natural Science Foundation of China(No.50903003)China Petroleum Chemical Corp.(SINOPEC)and Program for Changjiang Scholars and Innovative Research Teams in Universities(IRT0706)
文摘FTIR spectroscopy in combination with a diamond tipped attenuated total reflectance （ATR） immersion probe was utilized to study in situ the copolymerization of butadiene （Bd） and isoprene （Ip） with neodymium-based catalyst in hexane. The relationship between the signal intensity of monomer and its concentration was investigated. The kinetic study of copolymerization of Bd and Ip was further conducted, and the monomer reactivity ratios were determined via in situ ATR FTIR. The signal band at 1010 cm^-1 was assigned to wagging vibration of Bd and its intensity was proportional to Bd concentration （[Bd]） in the range of 0.46-3.88 mol.L^-1. The signal bands at 890 and 989 cm^-1 were assigned to wagging vibration of Ip and the signal intensity was also proportional to Ip concentration （[Ip]） in the range of 0.08-4.73 mol·L^-1 at 890 cm^-1 and 0.08-7.49 mol·L^-1 at 989 cm^-1, respectively. Thus the signal band at 1010 cm^-1 was chosen to monitor Bd concentration and bands at 989 and 890 cm^-1 to monitor Ip concentration during the copolymerization, respectively. It was demonstrated that the conversions of Bd and Ip calculated from FTIR data agreed very well with those obtained gravimetrically. The poiymerization rates were first order with respect to both [Bd] and [Ip], respectively at different polymerization temperatures. The apparent propagation activation energy for Bd and Ip could be determined to be 54.4 kJ·mol^-1 and 57.7 kJ·mol^-1, respectively. The monomer reactivity ratios were calculated to be 1.08 for Bd （rBd） and 0.48 for IP （rIp） based on FTIR data. The Bd-Ip copolymer products with random sequence could be obtained with only one glass transition temperature.
文摘Lignin isolated from enzymatic hydrolyzed corn-stalks (EH-lignin) is a renewable natural polymer noted for its versatility and applicability in a vari-ety of uses. Graft copolymerization of EH-lignin with acrylamide (AM) and the application of this copolymer as a flocculant in dye wastewater treatment were studied in this article. The influ-ences of some factors on yield of copolymer and the grafting ratio were investigated and the structure of EH-lignin/AM graft copolymer was characterized by FT-IR. According to the yield and the grafting ratio, the optimum conditions for graft copolymerization were as follows: initiator K2S2O8-Na2S2O3 with a quantity 3 wt% of EH-lignin, mass ratio of AM to EH-lignin was 2~3, reaction time 4h and temperature at 50℃. It was found that the absorption capacity of graft copolymer to two azo-dyes was enhanced with the increase of grafting ratio. Furthermore, the residue concen-tration of EH-lignin/AM graft copolymer remained in the supernatant after flocculation was much lower than that of pure EH-lignin.
基金Science Technology Foundation of Jilin Province (200223)
文摘The catalytic activity of poly（styrene-acrylic acid） （PSAA） supported neodymium chloride （NdCl3） complex for the copolymerization of styrene and 4-Vinylpyridine was studied. The influence of various factors, such as Al/Nd molar ratio, reaction time, macromolecular carder （PSAA）, and ratio of styrene to 4-vinypyridine （g/g）, on the copolymerization yield of styrene and 4-Vinylpyridine was investigated. The results showed that the copolymerization of polar monomers with olefins occurred efficiently and the catalytic activity of polymer-supported catalyst was higher than that of the similar small molecular catalysts. The activity of PSAA.Nd complex increased with in- creasing Al/Nd molar ratios and decreased with increasing polymerization time. The highest activity of PSAA＇Nd was observed at 120 min, and the highest yield was found at the ratio of styrene to 4-vinylpyridine of 4：2. DSC analysis presented that the resulted polymer had only one glass transition temperature, and showed very good thermal stability.
