A Recent paper by Ma et al.,claims to estimate the state of charge of Lithium-ion batteries with a fractionalorder impedance model including a Warburg and a constant phase element(CPE)with a maximum error of 0.5%[1].T...A Recent paper by Ma et al.,claims to estimate the state of charge of Lithium-ion batteries with a fractionalorder impedance model including a Warburg and a constant phase element(CPE)with a maximum error of 0.5%[1].The proposed equivalent circuit model from[1]is reproduced in Fig.1.展开更多
Delineating life circles is an essential prerequisite for urban community life circle planning. Recent studies combined the environmental contexts with residents’ global positioning system(GPS) data to delineate the ...Delineating life circles is an essential prerequisite for urban community life circle planning. Recent studies combined the environmental contexts with residents’ global positioning system(GPS) data to delineate the life circles. This method, however, is constrained by GPS data, and it can only be applied in the GPS surveyed communities. To address this limitation, this study developed a generalizable delineation method without the constraint of behavioral data. According to previous research, the community life circle consists of the walking-accessible range and internal structure. The core task to develop the generalizable method was to estimate the spatiotemporal behavioral demand for each plot of land to acquire the internal structure of the life circle, as the range can be delineated primarily based on environmental data. Therefore, behavioral demand estimation models were established through logistic regression and machine learning techniques, including decision trees and ensemble learning. The model with the lowest error rate was chosen as the final estimation model for each type of land. Finally, we used a community without GPS data as an example to demonstrate the effectiveness of the estimation models and delineation method. This article extends the existing literature by introducing spatiotemporal behavioral demand estimation models, which learn the relationships between environmental contexts, population composition and the existing delineated results based on GPS data to delineate the internal structure of the community life circle without employing behavioral data. Furthermore, the proposed method and delineation results also contributes to facilities adjustments and location selections in life circle planning, people-oriented transformation in urban planning, and activity space estimation of the population in evaluating and improving the urban policies.展开更多
Greenhouse experiments were conducted to determine the ammonia volatilization loss with or withoutapplication of surface film-forming material (SFFM). Ammonia volatilization loss was estimated by the modeldeveloped by...Greenhouse experiments were conducted to determine the ammonia volatilization loss with or withoutapplication of surface film-forming material (SFFM). Ammonia volatilization loss was estimated by the modeldeveloped by Jayaweera and Mikkelsen. The results showed that the model could estimate and predict wellammonia volatilization loss also in case of SFFM addition. There was an emended factor B introduced tothe model calculation when SFPM was used. Simulated calculation showed that the effect of factor B onNHa loss was obvious. The value of B was governed by SFFM and the environmental conditions. Sensitivityanalysis suggested that pH was the main factor coatrolling NH3 volatilization loss from the floodwater.展开更多
An airship model is made-up of aerostatic,aerodynamic,dynamic,and propulsive forces and torques.Besides others,the computation of aerodynamic forces and torques is difficult.Usually,wind tunnel experimentation and pot...An airship model is made-up of aerostatic,aerodynamic,dynamic,and propulsive forces and torques.Besides others,the computation of aerodynamic forces and torques is difficult.Usually,wind tunnel experimentation and potential flow theory are used for their calculations.However,the limitations of these methods pose difficulties in their accurate calculation.In this work,an online estimation scheme based on unscented Kalman filter(UKF)is proposed for their calculation.The proposed method introduces six auxiliary states for the complete aerodynamic model.UKF uses an extended model and provides an estimate of a complete state vector along with auxiliary states.The proposed method uses the minimum auxiliary state variables for the approximation of the complete aerodynamic model that makes it computationally less intensive.UKF estimation performance is evaluated by developing a nonlinear simulation environment for University of Engineering and Technology,Taxila(UETT)airship.Estimator performance is validated by performing the error analysis based on estimation error and 2-σ uncertainty bound.For the same problem,the extended Kalman filter(EKF)is also implemented and its results are compared with UKF.The simulation results show that UKF successfully estimates the forces and torques due to the aerodynamic model with small estimation error and the comparative analysis with EKF shows that UKF improves the estimation results and also it is more suitable for the under-consideration problem.展开更多
Monitoring and evaluating the nutritional status of vegetation under stress from exhausted coal mining sites by hyper-spectral remote sensing is important in future ecological restoration engineering. The Wangpingcun ...Monitoring and evaluating the nutritional status of vegetation under stress from exhausted coal mining sites by hyper-spectral remote sensing is important in future ecological restoration engineering. The Wangpingcun coal mine, located in the Mentougou district of Beijing, was chosen as a case study. The ecological damage was analyzed by 3S technology, field investigation and from chemical data. The derivative spectra of the diagnostic absorption bands are derived from the spectra measured in the field and used as characteristic spectral variables. A correlation analysis was conducted for the nitrogen content of the vegetation samples and the fast derivative spectrum and the estimation model of nitrogen content established by a multiple stepwise linear regression method. The spatial distribution of nitrogen content was extracted by a parameter mapping method from the Hyperion data which revealed the distribution of the nitrogen content. In addition, the estimation model was evaluated for two evaluation indicators which are important for the precision of the model. Experimental results indicate that by linear regression and parameter mapping, the estimation model precision was Very high. The coefficient of determination, R2, was 0.795 and the standard deviation of residual （SDR） 0.19. The nitrogen content of most samples was about 1.03% and the nitrogen content in the study site seems inversely proportional to the distance from the piles of coal waste. Therefore, we can conclude that inversely modeling nitrogen content by hyper-spectral remote sensing in exhausted coal mining sites is feasible and our study can be taken as reference in species selection and in subseauent management and maintenance in ecological restoration.展开更多
A simulation model developed by the authors (Huang et al., 1999) was validated against independent field measurements of methane emission from rice paddy soils in Texas of USA, Tuzu Of China and Vercelli of Italy.A si...A simulation model developed by the authors (Huang et al., 1999) was validated against independent field measurements of methane emission from rice paddy soils in Texas of USA, Tuzu Of China and Vercelli of Italy.A simplified version of the simulation model was further validated against methane emission measurements from various regions of the world, including italy, China, Indonesia, Philippines and the United States. Model validation suggested that the seasonal variation of methane emission was mainly regulated by rice growth and development and that methane emission could be predicted from rice net productivity, cultivar character, soil texture and temperature, and organic matter amendments. Model simulations in general agreed with the observations. The comparison between computed and measured methane emission resulted in correlation coefficients r2 values from 0.450 to 0.952, significant at 0.01-0.001 probability level.On the basis of available information on rice cultivated area, growth duration, grain yield, soil texture and temperature, methane emission from rice paddy soils of China's Mainland was estimated for 28 rice cultivated provinces/municipal cities by employing the validated model. The calculated daily methane emission rates, on a provincial scale, ranged from 0.12 to 0.71 g m-2 with an average of 0.26 g m-2. A total amount of 7.92 Tg CH4 per year, ranging from 5.89 to 11.17 Tg year-1, was estimated to be released from Chinese rice paddy soils. Of the total, 45% was emitted from the single-rice growing season, and 19% and 36% were from the early-rice and the late-rice growing seasons, respectively. Approximately 70% of the total was emitted in the region located at latitude between 25°and 32°N. The emissions from rice fields in Sichuan and Hunan provinces were calculated to be 2.34 Tg year-1, accounting for approximately 30% of the total.展开更多
Studies of wind erosion based on Geographic Information System（GIS） and Remote Sensing（RS） have not attracted sufficient attention because they are limited by natural and scientific factors.Few studies have been c...Studies of wind erosion based on Geographic Information System（GIS） and Remote Sensing（RS） have not attracted sufficient attention because they are limited by natural and scientific factors.Few studies have been conducted to estimate the intensity of large-scale wind erosion in Inner Mongolia,China.In the present study,a new model based on five factors including the number of snow cover days,soil erodibility,aridity,vegetation index and wind field intensity was developed to quantitatively estimate the amount of wind erosion.The results showed that wind erosion widely existed in Inner Mongolia.It covers an area of approximately 90×104 km2,accounting for 80% of the study region.During 1985–2011,wind erosion has aggravated over the entire region of Inner Mongolia,which was indicated by enlarged zones of erosion at severe,intensive and mild levels.In Inner Mongolia,a distinct spatial differentiation of wind erosion intensity was noted.The distribution of change intensity exhibited a downward trend that decreased from severe increase in the southwest to mild decrease in the northeast of the region.Zones occupied by barren land or sparse vegetation showed the most severe erosion,followed by land occupied by open shrubbery.Grasslands would have the most dramatic potential for changes in the future because these areas showed the largest fluctuation range of change intensity.In addition,a significantly negative relation was noted between change intensity and land slope.The relation between soil type and change intensity differed with the content of Ca CO3 and the surface composition of sandy,loamy and clayey soils with particle sizes of 0–1 cm.The results have certain significance for understanding the mechanism and change process of wind erosion that has occurred during the study period.Therefore,the present study can provide a scientific basis for the prevention and treatment of wind erosion in Inner Mongolia.展开更多
Prognosis is a key technology to improve reliability,safety and maintainability of products,a lot of researchers have been devoted to this technology.But to improve the predict accuracy of remaining life of products h...Prognosis is a key technology to improve reliability,safety and maintainability of products,a lot of researchers have been devoted to this technology.But to improve the predict accuracy of remaining life of products has been difficult.To predict the lifetime specification of pneumatic cylinders with high reliability and long lifetime and small specimen,this paper put forward the prognosis algorithm based on the path classification and estimation（PACE） model.PACE model is based entirely on failure data instead of failure threshold.Pneumatic cylinders normally characterize with failure mechanism wear and tear.Since the minimum working pressure increases with the number of working cycles,the minimum working pressure is chosen as degradation signal.PACE model is fundamentally composed of two operations：path classification and remaining useful life（RUL） estimation.Path classification is to classify a current degradation path as belonging to one or more of previously collected exemplary degradation paths.RUL estimation is to use the resulting memberships to estimate the remaining useful life.In order for verification and validation of PACE prognostic method,six pneumatic cylinders are tested.The test data is analyzed by PACE prognostics.It is found that the PACE based prognosis method has higher prediction accuracy and smaller variance and PACE model is significantly outperform population based prognostics especially for small specimen condition.PACE model based method solved the problem of prediction accuracy for small specimen pneumatic cylinders＇ prognosis.展开更多
For the case that two pursuers intercept an evasive target,the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target,which performs a bang For ...For the case that two pursuers intercept an evasive target,the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target,which performs a bang For the case that two pursuers intercept an evasive target,the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target,which performs a bang-bang evasive maneuver with a random switching time.Combined Fast multiple model adaptive estimation(Fast MMAE)algorithm,the cooperative guidance law takes detection configuration affecting the accuracy of interception into consideration.Introduced the detection error model related to the line-of-sight(LOS)separation angle of two interceptors,an optimal cooperative guidance law solving the optimization problem is designed to modulate the LOS separation angle to reduce the estimation error and improve the interception performance.Due to the uncertainty of the target bang-bang maneuver switching time and the effective fitting of its multi-modal motion,Fast MMAE is introduced to identify its maneuver switching time and estimate the acceleration of the target to track and intercept the target accurately.The designed cooperative optimal guidance law with Fast MMAE has better estimation ability and interception performance than the traditional guidance law and estimation method via Monte Carlo simulation.展开更多
Since the main power source of hybrid electric vehicle（HEV） is supplied by the power battery,the predicted performance of power battery,especially the state-of-charge（SOC） estimation has attracted great attention ...Since the main power source of hybrid electric vehicle（HEV） is supplied by the power battery,the predicted performance of power battery,especially the state-of-charge（SOC） estimation has attracted great attention in the area of HEV.However,the value of SOC estimation could not be greatly precise so that the running performance of HEV is greatly affected.A variable structure extended kalman filter（VSEKF）-based estimation method,which could be used to analyze the SOC of lithium-ion battery in the fixed driving condition,is presented.First,the general lower-order battery equivalent circuit model（GLM）,which includes column accumulation model,open circuit voltage model and the SOC output model,is established,and the off-line and online model parameters are calculated with hybrid pulse power characteristics（HPPC） test data.Next,a VSEKF estimation method of SOC,which integrates the ampere-hour（Ah） integration method and the extended Kalman filter（EKF） method,is executed with different adaptive weighting coefficients,which are determined according to the different values of open-circuit voltage obtained in the corresponding charging or discharging processes.According to the experimental analysis,the faster convergence speed and more accurate simulating results could be obtained using the VSEKF method in the running performance of HEV.The error rate of SOC estimation with the VSEKF method is focused in the range of 5% to 10% comparing with the range of 20% to 30% using the EKF method and the Ah integration method.In Summary,the accuracy of the SOC estimation in the lithium-ion battery cell and the pack of lithium-ion battery system,which is obtained utilizing the VSEKF method has been significantly improved comparing with the Ah integration method and the EKF method.The VSEKF method utilizing in the SOC estimation in the lithium-ion pack of HEV can be widely used in practical driving conditions.展开更多
In this paper, a new bias estimation method is proposed and applied in a regional ensemble Kalman filter （EnKF） based on the Weather Research and Forecasting （WRF） Model. The method is based on a homogeneous linea...In this paper, a new bias estimation method is proposed and applied in a regional ensemble Kalman filter （EnKF） based on the Weather Research and Forecasting （WRF） Model. The method is based on a homogeneous linear bias model, and the model bias is estimated using statistics at each assimilation cycle, which is different from the state augmentation methods proposed in pre- vious literatures. The new method provides a good estimation for the model bias of some specific variables, such as sea level pres- sure （SLP）. A series of numerical experiments with EnKF are performed to examine the new method under a severe weather condi- tion. Results show the positive effect of the method on the forecasting of circulation pattern and meso-scale systems, and the reduc- tion of analysis errors. The background error covarianee structures of surface variables and the effects of model system bias on EnKF are also studied under the error covariance structures and a new concept ＇correlation scale＇ is introduced. However, the new method needs further evaluation with more cases of assimilation.展开更多
The robotic airship can provide a promising aerostatic platform for many potential applications.These applications require a precise autonomous trajectory tracking control for airship.Airship has a nonlinear and uncer...The robotic airship can provide a promising aerostatic platform for many potential applications.These applications require a precise autonomous trajectory tracking control for airship.Airship has a nonlinear and uncertain dynamics.It is prone to wind disturbances that offer a challenge for a trajectory tracking control design.This paper addresses the airship trajectory tracking problem having time varying reference path.A lumped parameter estimation approach under model uncertainties and wind disturbances is opted against distributed parameters.It uses extended Kalman filter(EKF)for uncertainty and disturbance estimation.The estimated parameters are used by sliding mode controller(SMC)for ultimate control of airship trajectory tracking.This comprehensive algorithm,EKF based SMC(ESMC),is used as a robust solution to track airship trajectory.The proposed estimator provides the estimates of wind disturbances as well as model uncertainty due to the mass matrix variations and aerodynamic model inaccuracies.The stability and convergence of the proposed method are investigated using the Lyapunov stability analysis.The simulation results show that the proposed method efficiently tracks the desired trajectory.The method solves the stability,convergence,and chattering problem of SMC under model uncertainties and wind disturbances.展开更多
An improved method using kernel density estimation （KDE） and confidence level is presented for model validation with small samples. Decision making is a challenging problem because of input uncertainty and only smal...An improved method using kernel density estimation （KDE） and confidence level is presented for model validation with small samples. Decision making is a challenging problem because of input uncertainty and only small samples can be used due to the high costs of experimental measurements. However, model validation provides more confidence for decision makers when improving prediction accuracy at the same time. The confidence level method is introduced and the optimum sample variance is determined using a new method in kernel density estimation to increase the credibility of model validation. As a numerical example, the static frame model validation challenge problem presented by Sandia National Laboratories has been chosen. The optimum bandwidth is selected in kernel density estimation in order to build the probability model based on the calibration data. The model assessment is achieved using validation and accreditation experimental data respectively based on the probability model. Finally, the target structure prediction is performed using validated model, which are consistent with the results obtained by other researchers. The results demonstrate that the method using the improved confidence level and kernel density estimation is an effective approach to solve the model validation problem with small samples.展开更多
The variable-structure multiple-model（VSMM）approach,one of the multiple-model（MM）methods,is a popular and effective approach in handling problems with mode uncertainties.The model sequence set adaptation（MSA）is ...The variable-structure multiple-model（VSMM）approach,one of the multiple-model（MM）methods,is a popular and effective approach in handling problems with mode uncertainties.The model sequence set adaptation（MSA）is the key to design a better VSMM.However,MSA methods in the literature have big room to improve both theoretically and practically.To this end,we propose a feedback structure based entropy approach that could fnd the model sequence sets with the smallest size under certain conditions.The fltered data are fed back in real time and can be used by the minimum entropy（ME）based VSMM algorithms,i.e.,MEVSMM.Firstly,the full Markov chains are used to achieve optimal solutions.Secondly,the myopic method together with particle flter（PF）and the challenge match algorithm are also used to achieve sub-optimal solutions,a trade-off between practicability and optimality.The numerical results show that the proposed algorithm provides not only refned model sets but also a good robustness margin and very high accuracy.展开更多
Aiming at the shortage of sufficient continuous parameters for using models to estimate farmland soil organic carbon(SOC) content, an acquisition method of factors influencing farmland SOC and an estimation method of ...Aiming at the shortage of sufficient continuous parameters for using models to estimate farmland soil organic carbon(SOC) content, an acquisition method of factors influencing farmland SOC and an estimation method of farmland SOC content with Internet of Things(IOT) are proposed in this paper. The IOT sensing device and transmission network were established in a wheat demonstration base in Yanzhou Distict of Jining City, Shandong Province, China to acquire data in real time. Using real-time data and statistics data, the dynamic changes of SOC content between October 2012 and June 2015 was simulated in the experimental area with SOC dynamic simulation model. In order to verify the estimation results, potassium dichromate external heating method was applied for measuring the SOC content. The results show that: 1) The estimated value matches the measured value in the lab very well. So the method is feasible in this paper. 2) There is a clear dynamic variation in the SOC content at 0.2 m soil depth in different growing periods of wheat. The content reached the highest level during the sowing period, and is lowest in the flowering period. 3) The SOC content at 0.2 m soil depth varies in accordance with the amount of returned straw. The larger the amount of returned straw is, the higher the SOC content.展开更多
Seismic safety evaluation is a basic work for determining the seismic resistance requirements of major construc-tion projects. The effect, especially the economic effect of the seismic safety evaluation has been gener...Seismic safety evaluation is a basic work for determining the seismic resistance requirements of major construc-tion projects. The effect, especially the economic effect of the seismic safety evaluation has been generally con-cerned. The paper gives a model for estimating the effect of seismic safety evaluation and calculates roughly the economic effect of seismic safety evaluation with some examples.展开更多
We develop an interconnect crosstalk estimation model on the assumption of linearity for CMOS device. First, we analyze the terminal response of RC model on the worst condition from theS field to the time domain. The ...We develop an interconnect crosstalk estimation model on the assumption of linearity for CMOS device. First, we analyze the terminal response of RC model on the worst condition from theS field to the time domain. The exact 3 order coefficients inS field are obtained due to the interconnect tree model. Based on this, a crosstalk peak estimation formula is presented. Unlike other crosstalk equations in the literature, this formula is only used coupled capacitance and grand capacitance as parameter. Experimental results show that, compared with the SPICE results, the estimation formulae are simple and accurate. So the model is expected to be used in such fields as layout-driven logic and high level synthesis, performance-driven floorplanning and interconnect planning.展开更多
Estimation of state-of-charge and state-of-health for batteries is one of the most important feature for modern battery management system(BMS).Robust or adaptive methods are the most investigated because a more intell...Estimation of state-of-charge and state-of-health for batteries is one of the most important feature for modern battery management system(BMS).Robust or adaptive methods are the most investigated because a more intelligent BMS could lead to sensible cost reduction of the entire battery system.We propose a new robust method,called ERMES(extendible range multi-model estimator),for determining an estimated state-of-charge(SoC),an estimated state-of-health(SoH)and a prediction of uncertainty of the estimates(state-of-uncertainty—SoU),thanks to which it is possible to monitor the validity of the estimates and adjust it,extending the robustness against a wider range of uncertainty,if necessary.Specifically,a finite number of models in state-space form are considered starting from a modified Thevenin battery model.Each model is characterized by a hypothesis of SoH value.An iterated extended Kalman filter(EKF)is then applied to each model in parallel,estimating for each one the SoC state variable.Residual errors are then considered to fuse both the estimated SoC and SoH from the bank of EKF,yielding the overall SoC and SoH estimates,respectively.In addition,a figure of uncertainty of such estimates is also provided.展开更多
Linear antenna arrays(LAs)can be used to accurately predict the direction of arrival(DOAs)of various targets of interest in a given area.However,under certain conditions,LA suffers from the problem of ambiguities amon...Linear antenna arrays(LAs)can be used to accurately predict the direction of arrival(DOAs)of various targets of interest in a given area.However,under certain conditions,LA suffers from the problem of ambiguities among the angles of targets,which may result inmisinterpretation of such targets.In order to cope up with such ambiguities,various techniques have been proposed.Unfortunately,none of them fully resolved such a problem because of rank deficiency and high computational cost.We aimed to resolve such a problem by proposing an algorithm using differential geometry.The proposed algorithm uses a specially designed doublet antenna array,which is made up of two individual linear arrays.Two angle observation models,ambiguous observation model(AOM)and estimated observation model(EOM),are derived for each individual array.The ambiguous set of angles is contained in the AOM,which is obtained from the corresponding array elements using differential geometry.The EOM for each array,on the other hand,contains estimated angles of all sources impinging signals on each array,as calculated by a direction-finding algorithm such as the genetic algorithm.The algorithm then contrasts the EOM of each array with its AOM,selecting the output of that array whose EOM has the minimum correlation with its corresponding AOM.In comparison to existing techniques,the proposed algorithm improves estimation accuracy and has greater precision in antenna aperture selection,resulting in improved resolution capabilities and the potential to be used more widely in practical scenarios.The simulation results using MATLAB authenticates the effectiveness of the proposed algorithm.展开更多
A multi-constituent water quality model is presented,Which relates carbonaceous biochemical oxygen demand (CBOD),amonia (NH3-N), nitrite(NO2-N), nitrate(NO3-N) and dissolvedoxygen(DO). The parameters are solved by Mar...A multi-constituent water quality model is presented,Which relates carbonaceous biochemical oxygen demand (CBOD),amonia (NH3-N), nitrite(NO2-N), nitrate(NO3-N) and dissolvedoxygen(DO). The parameters are solved by Marquardt Method (i. e.,Dampled Least Square Method) while initial values inoptimization are produced by Monte-Carlo Method. The Potential ofthe method as a parameter estimation aid is demonstrated for theapplication to the Liangyi Rver, JiangSu Province of China and by aspecial comparison with Gauss Method.展开更多
文摘A Recent paper by Ma et al.,claims to estimate the state of charge of Lithium-ion batteries with a fractionalorder impedance model including a Warburg and a constant phase element(CPE)with a maximum error of 0.5%[1].The proposed equivalent circuit model from[1]is reproduced in Fig.1.
基金Under the auspices of the National Natural Science Foundation of China(No.41571144)。
文摘Delineating life circles is an essential prerequisite for urban community life circle planning. Recent studies combined the environmental contexts with residents’ global positioning system(GPS) data to delineate the life circles. This method, however, is constrained by GPS data, and it can only be applied in the GPS surveyed communities. To address this limitation, this study developed a generalizable delineation method without the constraint of behavioral data. According to previous research, the community life circle consists of the walking-accessible range and internal structure. The core task to develop the generalizable method was to estimate the spatiotemporal behavioral demand for each plot of land to acquire the internal structure of the life circle, as the range can be delineated primarily based on environmental data. Therefore, behavioral demand estimation models were established through logistic regression and machine learning techniques, including decision trees and ensemble learning. The model with the lowest error rate was chosen as the final estimation model for each type of land. Finally, we used a community without GPS data as an example to demonstrate the effectiveness of the estimation models and delineation method. This article extends the existing literature by introducing spatiotemporal behavioral demand estimation models, which learn the relationships between environmental contexts, population composition and the existing delineated results based on GPS data to delineate the internal structure of the community life circle without employing behavioral data. Furthermore, the proposed method and delineation results also contributes to facilities adjustments and location selections in life circle planning, people-oriented transformation in urban planning, and activity space estimation of the population in evaluating and improving the urban policies.
文摘Greenhouse experiments were conducted to determine the ammonia volatilization loss with or withoutapplication of surface film-forming material (SFFM). Ammonia volatilization loss was estimated by the modeldeveloped by Jayaweera and Mikkelsen. The results showed that the model could estimate and predict wellammonia volatilization loss also in case of SFFM addition. There was an emended factor B introduced tothe model calculation when SFPM was used. Simulated calculation showed that the effect of factor B onNHa loss was obvious. The value of B was governed by SFFM and the environmental conditions. Sensitivityanalysis suggested that pH was the main factor coatrolling NH3 volatilization loss from the floodwater.
文摘An airship model is made-up of aerostatic,aerodynamic,dynamic,and propulsive forces and torques.Besides others,the computation of aerodynamic forces and torques is difficult.Usually,wind tunnel experimentation and potential flow theory are used for their calculations.However,the limitations of these methods pose difficulties in their accurate calculation.In this work,an online estimation scheme based on unscented Kalman filter(UKF)is proposed for their calculation.The proposed method introduces six auxiliary states for the complete aerodynamic model.UKF uses an extended model and provides an estimate of a complete state vector along with auxiliary states.The proposed method uses the minimum auxiliary state variables for the approximation of the complete aerodynamic model that makes it computationally less intensive.UKF estimation performance is evaluated by developing a nonlinear simulation environment for University of Engineering and Technology,Taxila(UETT)airship.Estimator performance is validated by performing the error analysis based on estimation error and 2-σ uncertainty bound.For the same problem,the extended Kalman filter(EKF)is also implemented and its results are compared with UKF.The simulation results show that UKF successfully estimates the forces and torques due to the aerodynamic model with small estimation error and the comparative analysis with EKF shows that UKF improves the estimation results and also it is more suitable for the under-consideration problem.
文摘Monitoring and evaluating the nutritional status of vegetation under stress from exhausted coal mining sites by hyper-spectral remote sensing is important in future ecological restoration engineering. The Wangpingcun coal mine, located in the Mentougou district of Beijing, was chosen as a case study. The ecological damage was analyzed by 3S technology, field investigation and from chemical data. The derivative spectra of the diagnostic absorption bands are derived from the spectra measured in the field and used as characteristic spectral variables. A correlation analysis was conducted for the nitrogen content of the vegetation samples and the fast derivative spectrum and the estimation model of nitrogen content established by a multiple stepwise linear regression method. The spatial distribution of nitrogen content was extracted by a parameter mapping method from the Hyperion data which revealed the distribution of the nitrogen content. In addition, the estimation model was evaluated for two evaluation indicators which are important for the precision of the model. Experimental results indicate that by linear regression and parameter mapping, the estimation model precision was Very high. The coefficient of determination, R2, was 0.795 and the standard deviation of residual （SDR） 0.19. The nitrogen content of most samples was about 1.03% and the nitrogen content in the study site seems inversely proportional to the distance from the piles of coal waste. Therefore, we can conclude that inversely modeling nitrogen content by hyper-spectral remote sensing in exhausted coal mining sites is feasible and our study can be taken as reference in species selection and in subseauent management and maintenance in ecological restoration.
文摘A simulation model developed by the authors (Huang et al., 1999) was validated against independent field measurements of methane emission from rice paddy soils in Texas of USA, Tuzu Of China and Vercelli of Italy.A simplified version of the simulation model was further validated against methane emission measurements from various regions of the world, including italy, China, Indonesia, Philippines and the United States. Model validation suggested that the seasonal variation of methane emission was mainly regulated by rice growth and development and that methane emission could be predicted from rice net productivity, cultivar character, soil texture and temperature, and organic matter amendments. Model simulations in general agreed with the observations. The comparison between computed and measured methane emission resulted in correlation coefficients r2 values from 0.450 to 0.952, significant at 0.01-0.001 probability level.On the basis of available information on rice cultivated area, growth duration, grain yield, soil texture and temperature, methane emission from rice paddy soils of China's Mainland was estimated for 28 rice cultivated provinces/municipal cities by employing the validated model. The calculated daily methane emission rates, on a provincial scale, ranged from 0.12 to 0.71 g m-2 with an average of 0.26 g m-2. A total amount of 7.92 Tg CH4 per year, ranging from 5.89 to 11.17 Tg year-1, was estimated to be released from Chinese rice paddy soils. Of the total, 45% was emitted from the single-rice growing season, and 19% and 36% were from the early-rice and the late-rice growing seasons, respectively. Approximately 70% of the total was emitted in the region located at latitude between 25°and 32°N. The emissions from rice fields in Sichuan and Hunan provinces were calculated to be 2.34 Tg year-1, accounting for approximately 30% of the total.
基金supported by the National Natural Science Foundation of China (41201441,41371363,41301501)Foundation of Director of Institute of Remote Sensing and Digital Earth,Chinese Academy of Science (Y4SY0200CX)Guangxi Key Laboratory of Spatial Information and Geomatics (1207115-18)
文摘Studies of wind erosion based on Geographic Information System（GIS） and Remote Sensing（RS） have not attracted sufficient attention because they are limited by natural and scientific factors.Few studies have been conducted to estimate the intensity of large-scale wind erosion in Inner Mongolia,China.In the present study,a new model based on five factors including the number of snow cover days,soil erodibility,aridity,vegetation index and wind field intensity was developed to quantitatively estimate the amount of wind erosion.The results showed that wind erosion widely existed in Inner Mongolia.It covers an area of approximately 90×104 km2,accounting for 80% of the study region.During 1985–2011,wind erosion has aggravated over the entire region of Inner Mongolia,which was indicated by enlarged zones of erosion at severe,intensive and mild levels.In Inner Mongolia,a distinct spatial differentiation of wind erosion intensity was noted.The distribution of change intensity exhibited a downward trend that decreased from severe increase in the southwest to mild decrease in the northeast of the region.Zones occupied by barren land or sparse vegetation showed the most severe erosion,followed by land occupied by open shrubbery.Grasslands would have the most dramatic potential for changes in the future because these areas showed the largest fluctuation range of change intensity.In addition,a significantly negative relation was noted between change intensity and land slope.The relation between soil type and change intensity differed with the content of Ca CO3 and the surface composition of sandy,loamy and clayey soils with particle sizes of 0–1 cm.The results have certain significance for understanding the mechanism and change process of wind erosion that has occurred during the study period.Therefore,the present study can provide a scientific basis for the prevention and treatment of wind erosion in Inner Mongolia.
基金supported by the Laboratory of Aviation Safety Technical Analysis and Appraisal of China Academy of Civil Aviation Science and Technology(Grant No. 2009-02)
文摘Prognosis is a key technology to improve reliability,safety and maintainability of products,a lot of researchers have been devoted to this technology.But to improve the predict accuracy of remaining life of products has been difficult.To predict the lifetime specification of pneumatic cylinders with high reliability and long lifetime and small specimen,this paper put forward the prognosis algorithm based on the path classification and estimation（PACE） model.PACE model is based entirely on failure data instead of failure threshold.Pneumatic cylinders normally characterize with failure mechanism wear and tear.Since the minimum working pressure increases with the number of working cycles,the minimum working pressure is chosen as degradation signal.PACE model is fundamentally composed of two operations：path classification and remaining useful life（RUL） estimation.Path classification is to classify a current degradation path as belonging to one or more of previously collected exemplary degradation paths.RUL estimation is to use the resulting memberships to estimate the remaining useful life.In order for verification and validation of PACE prognostic method,six pneumatic cylinders are tested.The test data is analyzed by PACE prognostics.It is found that the PACE based prognosis method has higher prediction accuracy and smaller variance and PACE model is significantly outperform population based prognostics especially for small specimen condition.PACE model based method solved the problem of prediction accuracy for small specimen pneumatic cylinders＇ prognosis.
基金This work was supported by the National Natural Science Foundation(NNSF)of China under grant no.61673386,62073335the China Postdoctoral Science Foundation(2017M613201,2019T120944).
文摘For the case that two pursuers intercept an evasive target,the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target,which performs a bang For the case that two pursuers intercept an evasive target,the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target,which performs a bang-bang evasive maneuver with a random switching time.Combined Fast multiple model adaptive estimation(Fast MMAE)algorithm,the cooperative guidance law takes detection configuration affecting the accuracy of interception into consideration.Introduced the detection error model related to the line-of-sight(LOS)separation angle of two interceptors,an optimal cooperative guidance law solving the optimization problem is designed to modulate the LOS separation angle to reduce the estimation error and improve the interception performance.Due to the uncertainty of the target bang-bang maneuver switching time and the effective fitting of its multi-modal motion,Fast MMAE is introduced to identify its maneuver switching time and estimate the acceleration of the target to track and intercept the target accurately.The designed cooperative optimal guidance law with Fast MMAE has better estimation ability and interception performance than the traditional guidance law and estimation method via Monte Carlo simulation.
基金Supported by National Key Technology R&D Program of Ministry of Science and Technology of China(Grant No.2013BAG14B01)
文摘Since the main power source of hybrid electric vehicle（HEV） is supplied by the power battery,the predicted performance of power battery,especially the state-of-charge（SOC） estimation has attracted great attention in the area of HEV.However,the value of SOC estimation could not be greatly precise so that the running performance of HEV is greatly affected.A variable structure extended kalman filter（VSEKF）-based estimation method,which could be used to analyze the SOC of lithium-ion battery in the fixed driving condition,is presented.First,the general lower-order battery equivalent circuit model（GLM）,which includes column accumulation model,open circuit voltage model and the SOC output model,is established,and the off-line and online model parameters are calculated with hybrid pulse power characteristics（HPPC） test data.Next,a VSEKF estimation method of SOC,which integrates the ampere-hour（Ah） integration method and the extended Kalman filter（EKF） method,is executed with different adaptive weighting coefficients,which are determined according to the different values of open-circuit voltage obtained in the corresponding charging or discharging processes.According to the experimental analysis,the faster convergence speed and more accurate simulating results could be obtained using the VSEKF method in the running performance of HEV.The error rate of SOC estimation with the VSEKF method is focused in the range of 5% to 10% comparing with the range of 20% to 30% using the EKF method and the Ah integration method.In Summary,the accuracy of the SOC estimation in the lithium-ion battery cell and the pack of lithium-ion battery system,which is obtained utilizing the VSEKF method has been significantly improved comparing with the Ah integration method and the EKF method.The VSEKF method utilizing in the SOC estimation in the lithium-ion pack of HEV can be widely used in practical driving conditions.
基金supported by the Provincial Science and Technology Development Program of Shandong under Grant No.2008GG10008001Key Technology Integration and Application Program of China Meteorological Administration,under Grant No.CMAGJ2011M32+1 种基金Forecaster Research Program of China Meteorological Administration,under Grant No.CMAYBY2012-031Science and Technology Research Programs of Shandong Provincial Meteorological Bureau,under Grant Nos.2012sdqxz03,2012sdqxz01,2010sdqxz01
文摘In this paper, a new bias estimation method is proposed and applied in a regional ensemble Kalman filter （EnKF） based on the Weather Research and Forecasting （WRF） Model. The method is based on a homogeneous linear bias model, and the model bias is estimated using statistics at each assimilation cycle, which is different from the state augmentation methods proposed in pre- vious literatures. The new method provides a good estimation for the model bias of some specific variables, such as sea level pres- sure （SLP）. A series of numerical experiments with EnKF are performed to examine the new method under a severe weather condi- tion. Results show the positive effect of the method on the forecasting of circulation pattern and meso-scale systems, and the reduc- tion of analysis errors. The background error covarianee structures of surface variables and the effects of model system bias on EnKF are also studied under the error covariance structures and a new concept ＇correlation scale＇ is introduced. However, the new method needs further evaluation with more cases of assimilation.
文摘The robotic airship can provide a promising aerostatic platform for many potential applications.These applications require a precise autonomous trajectory tracking control for airship.Airship has a nonlinear and uncertain dynamics.It is prone to wind disturbances that offer a challenge for a trajectory tracking control design.This paper addresses the airship trajectory tracking problem having time varying reference path.A lumped parameter estimation approach under model uncertainties and wind disturbances is opted against distributed parameters.It uses extended Kalman filter(EKF)for uncertainty and disturbance estimation.The estimated parameters are used by sliding mode controller(SMC)for ultimate control of airship trajectory tracking.This comprehensive algorithm,EKF based SMC(ESMC),is used as a robust solution to track airship trajectory.The proposed estimator provides the estimates of wind disturbances as well as model uncertainty due to the mass matrix variations and aerodynamic model inaccuracies.The stability and convergence of the proposed method are investigated using the Lyapunov stability analysis.The simulation results show that the proposed method efficiently tracks the desired trajectory.The method solves the stability,convergence,and chattering problem of SMC under model uncertainties and wind disturbances.
基金Funding of Jiangsu Innovation Program for Graduate Education (CXZZ11_0193)NUAA Research Funding (NJ2010009)
文摘An improved method using kernel density estimation （KDE） and confidence level is presented for model validation with small samples. Decision making is a challenging problem because of input uncertainty and only small samples can be used due to the high costs of experimental measurements. However, model validation provides more confidence for decision makers when improving prediction accuracy at the same time. The confidence level method is introduced and the optimum sample variance is determined using a new method in kernel density estimation to increase the credibility of model validation. As a numerical example, the static frame model validation challenge problem presented by Sandia National Laboratories has been chosen. The optimum bandwidth is selected in kernel density estimation in order to build the probability model based on the calibration data. The model assessment is achieved using validation and accreditation experimental data respectively based on the probability model. Finally, the target structure prediction is performed using validated model, which are consistent with the results obtained by other researchers. The results demonstrate that the method using the improved confidence level and kernel density estimation is an effective approach to solve the model validation problem with small samples.
基金supported in part by National Basic Research Program of China(No.2012CB821200)in part by the National Natural Science Foundation of China(No.61174024)
文摘The variable-structure multiple-model（VSMM）approach,one of the multiple-model（MM）methods,is a popular and effective approach in handling problems with mode uncertainties.The model sequence set adaptation（MSA）is the key to design a better VSMM.However,MSA methods in the literature have big room to improve both theoretically and practically.To this end,we propose a feedback structure based entropy approach that could fnd the model sequence sets with the smallest size under certain conditions.The fltered data are fed back in real time and can be used by the minimum entropy（ME）based VSMM algorithms,i.e.,MEVSMM.Firstly,the full Markov chains are used to achieve optimal solutions.Secondly,the myopic method together with particle flter（PF）and the challenge match algorithm are also used to achieve sub-optimal solutions,a trade-off between practicability and optimality.The numerical results show that the proposed algorithm provides not only refned model sets but also a good robustness margin and very high accuracy.
基金Under the auspices of National High-tech R&D Program of China(No.2013AA102301)National Natural Science Foundation of China(No.71503148)
文摘Aiming at the shortage of sufficient continuous parameters for using models to estimate farmland soil organic carbon(SOC) content, an acquisition method of factors influencing farmland SOC and an estimation method of farmland SOC content with Internet of Things(IOT) are proposed in this paper. The IOT sensing device and transmission network were established in a wheat demonstration base in Yanzhou Distict of Jining City, Shandong Province, China to acquire data in real time. Using real-time data and statistics data, the dynamic changes of SOC content between October 2012 and June 2015 was simulated in the experimental area with SOC dynamic simulation model. In order to verify the estimation results, potassium dichromate external heating method was applied for measuring the SOC content. The results show that: 1) The estimated value matches the measured value in the lab very well. So the method is feasible in this paper. 2) There is a clear dynamic variation in the SOC content at 0.2 m soil depth in different growing periods of wheat. The content reached the highest level during the sowing period, and is lowest in the flowering period. 3) The SOC content at 0.2 m soil depth varies in accordance with the amount of returned straw. The larger the amount of returned straw is, the higher the SOC content.
文摘Seismic safety evaluation is a basic work for determining the seismic resistance requirements of major construc-tion projects. The effect, especially the economic effect of the seismic safety evaluation has been generally con-cerned. The paper gives a model for estimating the effect of seismic safety evaluation and calculates roughly the economic effect of seismic safety evaluation with some examples.
基金SupportedbytheNationalHighTechnologyResearchandDevelopmentProgramofChina (863Plan) (863 SOC Y 3 3 2 )
文摘We develop an interconnect crosstalk estimation model on the assumption of linearity for CMOS device. First, we analyze the terminal response of RC model on the worst condition from theS field to the time domain. The exact 3 order coefficients inS field are obtained due to the interconnect tree model. Based on this, a crosstalk peak estimation formula is presented. Unlike other crosstalk equations in the literature, this formula is only used coupled capacitance and grand capacitance as parameter. Experimental results show that, compared with the SPICE results, the estimation formulae are simple and accurate. So the model is expected to be used in such fields as layout-driven logic and high level synthesis, performance-driven floorplanning and interconnect planning.
文摘Estimation of state-of-charge and state-of-health for batteries is one of the most important feature for modern battery management system(BMS).Robust or adaptive methods are the most investigated because a more intelligent BMS could lead to sensible cost reduction of the entire battery system.We propose a new robust method,called ERMES(extendible range multi-model estimator),for determining an estimated state-of-charge(SoC),an estimated state-of-health(SoH)and a prediction of uncertainty of the estimates(state-of-uncertainty—SoU),thanks to which it is possible to monitor the validity of the estimates and adjust it,extending the robustness against a wider range of uncertainty,if necessary.Specifically,a finite number of models in state-space form are considered starting from a modified Thevenin battery model.Each model is characterized by a hypothesis of SoH value.An iterated extended Kalman filter(EKF)is then applied to each model in parallel,estimating for each one the SoC state variable.Residual errors are then considered to fuse both the estimated SoC and SoH from the bank of EKF,yielding the overall SoC and SoH estimates,respectively.In addition,a figure of uncertainty of such estimates is also provided.
文摘Linear antenna arrays(LAs)can be used to accurately predict the direction of arrival(DOAs)of various targets of interest in a given area.However,under certain conditions,LA suffers from the problem of ambiguities among the angles of targets,which may result inmisinterpretation of such targets.In order to cope up with such ambiguities,various techniques have been proposed.Unfortunately,none of them fully resolved such a problem because of rank deficiency and high computational cost.We aimed to resolve such a problem by proposing an algorithm using differential geometry.The proposed algorithm uses a specially designed doublet antenna array,which is made up of two individual linear arrays.Two angle observation models,ambiguous observation model(AOM)and estimated observation model(EOM),are derived for each individual array.The ambiguous set of angles is contained in the AOM,which is obtained from the corresponding array elements using differential geometry.The EOM for each array,on the other hand,contains estimated angles of all sources impinging signals on each array,as calculated by a direction-finding algorithm such as the genetic algorithm.The algorithm then contrasts the EOM of each array with its AOM,selecting the output of that array whose EOM has the minimum correlation with its corresponding AOM.In comparison to existing techniques,the proposed algorithm improves estimation accuracy and has greater precision in antenna aperture selection,resulting in improved resolution capabilities and the potential to be used more widely in practical scenarios.The simulation results using MATLAB authenticates the effectiveness of the proposed algorithm.
文摘A multi-constituent water quality model is presented,Which relates carbonaceous biochemical oxygen demand (CBOD),amonia (NH3-N), nitrite(NO2-N), nitrate(NO3-N) and dissolvedoxygen(DO). The parameters are solved by Marquardt Method (i. e.,Dampled Least Square Method) while initial values inoptimization are produced by Monte-Carlo Method. The Potential ofthe method as a parameter estimation aid is demonstrated for theapplication to the Liangyi Rver, JiangSu Province of China and by aspecial comparison with Gauss Method.
