Studies in the coastal area of Bohai Bay,China,from July 2006 to October 2007,suggest that the method of meiofaunal biomass estimation affected the meiofaunal analysis.Conventional estimation methods that use a unique...Studies in the coastal area of Bohai Bay,China,from July 2006 to October 2007,suggest that the method of meiofaunal biomass estimation affected the meiofaunal analysis.Conventional estimation methods that use a unique mean individual weight value for nematodes to calculate total biomass may cause deviation of the results.A modified estimation method,named the Subsection Count Method (SCM),was also used to calculate meiofaunal biomass.This entails only a slight increase in workload but generates results of greater accuracy.Results gained using each of these two methods were compared in the present study.The results show that the conventional method generally estimates a meiofaunal biomass.The difference between the two estimation methods was highly significant (P<0.01) for the spring and winter cruises.Furthermore,the estimation method for meiofaunal biomass affected the analysis of horizontal distribution and correlation with environmental factors.These findings highlight the importance of estimation methods for meiofaunal biomass and will hopefully stimulate further investigation and discussion of the topic.展开更多
The conventional method which assumes the soil distribution is continuous was unsuitable for estimating soil organic carbon density(SOCD) in Karst areas because of its discontinuous soil distribution. The accurate est...The conventional method which assumes the soil distribution is continuous was unsuitable for estimating soil organic carbon density(SOCD) in Karst areas because of its discontinuous soil distribution. The accurate estimation of SOCD in Karst areas is essential for carbon sequestration assessment in China. In this study, a modified method,which considers the vertical proportion of soil area in the profile when calculating the SOCD, was developed to estimate the SOCD in a typical Karst peak-cluster depression area in southwest China. In the modified method, ground-penetrating radar(GPR) technology was used to detect the distribution and thickness of soil. The accuracy of the method was confirmed through comparison with the data obtained using a validation method, in which the soil thickness was measured by excavation. In comparison with the conventional method and average-soil-depth method,the SOCD estimated using the GPR method showed the minimum relative error with respect to that obtained using the validation method. At a regional scale, the average SOCDs at depths of 0-20 cm and 0-100 cm, which were interpolated by ordinary kriging,were 1.49(ranging from 0.03-5.65) and 2.26(0.09-11.60) kgm-2based on GPR method in our study area(covering 393.6 hm2), respectively. Therefore, the modified method can be applied on the accurate estimation of SOCD in discontinuous soil areas such as Karst regions.展开更多
Accurate assessment of herbage mass(HM)in pasture is a key to budgeting forage in grazing systems worldwide.Different non-destructive techniques to measuring pasture yield are commented.The methods compared include vi...Accurate assessment of herbage mass(HM)in pasture is a key to budgeting forage in grazing systems worldwide.Different non-destructive techniques to measuring pasture yield are commented.The methods compared include visual estimations,manual and electronic pasture meters and remote sensing.All methods are associated with a moderate to high error,showing that some indirect methods of yield estimation are appropriate under most appropriate because many factors as climate variations,soil certain conditions.In general terms,no method was found as the characteristics,plant phenology,pasture management and species composition must be taken into account to make local calibrations from a general model.Best results were found modifying general methods under local calibrations and under local conditions.In order to give farmers the best method to manage adequately their own grazing systems,researchers must select the most suitable technique considering the scale of operation,the desired accuracy and the resources available.展开更多
Stem diameter distribution information is useful in forest management planning. Weibull function is flexible, and has been used in characterising diameter distributions, especially in single-species planted stands, th...Stem diameter distribution information is useful in forest management planning. Weibull function is flexible, and has been used in characterising diameter distributions, especially in single-species planted stands, the world over. We evaluated some Weibull parameter estimation methods for stem diameter characterisation in （Oban） multi-species Forest in southern Nigeria. Four study sites （Aking, Ekang, Erokut and Ekuri） were selected. Four 2 km-long transects situated at 600 m apart were laid in each location. Five 50m x 50m plots were alternately laid along each transect at 400 m apart （20 plots/location） using systematic sampling technique. Tree growth variables： diameter at breast height （Dbh）, diameters at the base, middle and merchantable limit, total height, merchantable height, stem straightness, crown length and crown diameter were measured on all trees 〉 10 cm to compute model response variables such as mean diameters, basal area and stem volume. Weibull parameters estimation methods used were： moment-based, percentile-based, hybrid and maximum-likelihood （ML）. Data were analysed using descriptive statistics, regression models and ANOVA at α0.05. Percentile-based method was the best for Weibull [location （a）, scale （b） and shape （c）] parameters estimations with mLogL = 116.66±21.89, while hybrid method was least-suitable （mLogL = 690.14±128.81） for Weibull parameters estimations. Quadratic mean diameter （Dq） was the only suitable predictor of Weibull parameters in Oban Forest.展开更多
With the recent advent of Intelligent Transporta- tion Systems （ITS）, and their associated data collection and archiving capabilities, there is now a rich data source for transportation professionals to develop capa...With the recent advent of Intelligent Transporta- tion Systems （ITS）, and their associated data collection and archiving capabilities, there is now a rich data source for transportation professionals to develop capacity values for their own jurisdictions. Unfortunately, there is no consensus on the best approach for estimating capacity from ITS data. The motivation of this paper is to compare and contrast four of the most popular capacity estimation techniques in terms of （1） data requirements, （2） modeling effort required, （3） esti- mated parameter values, （4） theoretical background, and （5） statistical differences across time and over geographically dispersed locations. Specifically, the first method is the maximum observed value, the second is a standard funda- mental diagram curve fitting approach using the popular Van Aerde model, the third method uses the breakdown identifi- cation approach, and the fourth method is the survival prob- ability based on product limit method. These four approaches were tested on two test beds： one is located in San Diego, California, U.S., and has data from 112 work days; the other is located in Shanghai, China, and consists of 81 work days. It was found that, irrespective of the estimation methodology and the definition of capacity, the estimated capacity can vary considerably over time. The second finding was that, as ex- pected, the different approaches yielded different capacity results. These estimated capacities varied by as much as 26 % at the San Diego test site and by 34 % at the Shanghai test site. It was also found that each of the methodologies has advantages and disadvantages, and the best method will be the function of the available data, the application, and the goals of the modeler. Consequently, it is critical for users of automatic capacity estimation techniques, which utilize ITS data, to understand the underlying assumptions of each of the different approaches.展开更多
Based on the main research results of estimation methods of surface solar radiation at home and abroad in recent decades, three commonly used estimation models of surface solar radiation have been introduced, and thei...Based on the main research results of estimation methods of surface solar radiation at home and abroad in recent decades, three commonly used estimation models of surface solar radiation have been introduced, and their principles, advantages and disadvantages have been analyzed to provide scientific references for further study of surface solar radiation in future.展开更多
GMM inference procedures based on the square of the modulus of the model characteristic function are developed using sample moments selected using estimating function theory and bypassing the use of empirical characte...GMM inference procedures based on the square of the modulus of the model characteristic function are developed using sample moments selected using estimating function theory and bypassing the use of empirical characteristic function of other GMM procedures in the literature. The procedures are relatively simple to implement and are less simulation-oriented than simulated methods of inferences yet have the potential of good efficiencies for models with densities without closed form. The procedures also yield better estimators than method of moment estimators for models with more than three parameters as higher order sample moments tend to be unstable.展开更多
<div style="text-align:justify;"> As a generalized sensor, the RPC model with its accuracy equally matches the physical sensor model. Moreover, the accurate positioning combining with the flexibility i...<div style="text-align:justify;"> As a generalized sensor, the RPC model with its accuracy equally matches the physical sensor model. Moreover, the accurate positioning combining with the flexibility in application leads the RPC model to be the priority in photogrammetry processing. Generally, the RPC model is calculated through a control grid. Different RPC parameters solving methods and the operation efficiency all serve as variables in the accuracy of the model. In this paper, the ridge estimation iterative method, spectrum correction iteration, and conjugate gradient method are employed to solve RPC parameters;the accuracy and efficiency of three solving methods are analyzed and compared. The results show that ridge estimation iterative method and spectrum correction iteration have obvious advantages in accuracy. The ridge estimation iterative method has fewer iteration times and time con-sumption, and spectrum correction iteration has more stable precision. </div>展开更多
Estimating cross-range velocity is a challenging task for space-borne synthetic aperture radar（SAR）, which is important for ground moving target indication（GMTI）. Because the velocity of a target is very small com...Estimating cross-range velocity is a challenging task for space-borne synthetic aperture radar（SAR）, which is important for ground moving target indication（GMTI）. Because the velocity of a target is very small compared with that of the satellite, it is difficult to correctly estimate it using a conventional monostatic platform algorithm. To overcome this problem, a novel method employing multistatic SAR is presented in this letter. The proposed hybrid method, which is based on an extended space-time model（ESTIM） of the azimuth signal, has two steps： first, a set of finite impulse response（FIR） filter banks based on a fractional Fourier transform（FrFT） is used to separate multiple targets within a range gate; second, a cross-correlation spectrum weighted subspace fitting（CSWSF） algorithm is applied to each of the separated signals in order to estimate their respective parameters. As verified through computer simulation with the constellations of Cartwheel, Pendulum and Helix, this proposed time-frequency-subspace method effectively improves the estimation precision of the cross-range velocities of multiple targets.展开更多
In this paper the main sources causing the scatter of the experimental results of the material parameters are discussed. They can be divided into two parts: one is the experimental errors which are introduced because ...In this paper the main sources causing the scatter of the experimental results of the material parameters are discussed. They can be divided into two parts: one is the experimental errors which are introduced because of the inaccuracy of experimental equipment, the experimental techniques, etc., and the form of the scatter caused by this source is called external distribution. The other is due to the irregularity and inhomogeneity of the material structure and the randomness of deformation process. The scatter caused by this source is inherent and then this form of the scatter is called internal distribution. Obviously the experimental distribution of material parameters combines these two distributions in some way; therefore, it is a sum distribution of the external distribution and the internal distribution. In view of this , a general method used to analyse the influence of the experimental errors on the experimental results is presented, and three criteria used to value this influence are defined. An example in which the fracture toughness KIC is analysed shows that this method is reasonable, convenient and effective.展开更多
A recursive method based on successive computations of perimeters of inscribed regular polygons for estimating π is formulated by employing the Pythagorean theorem alone without resorting to any trigonometric calcula...A recursive method based on successive computations of perimeters of inscribed regular polygons for estimating π is formulated by employing the Pythagorean theorem alone without resorting to any trigonometric calculations. The approach is classical but the formulation of coupled recursion relations is new. Further, use of infinite series for computing π is explored by an improved version of Leibniz’s series expansion. Finally, some remarks with reference to π are made on a relatively recently rediscovered Sumerian tablet depicting geometric figures.展开更多
Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the ...Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the earthquake catalogue.The existing earthquake catalogue contains both historical and recent instrumental data sets and it is inadequate to use only one part.Combining the large number of historical events with recent complete records and taking the magnitude uncertainty into account,Kijko’s method gives the maximum likelihood estimation of b value and annual activity rate,which might be more realistic.On the other hand,this method considers the source zone boundary uncertainty in seismic hazard analysis,which means the earthquake activity rate across a boundary of a source zone changes smoothly instead of abruptly and avoids too large a gradient in the calculated results.展开更多
This article explores the comparison between the probability method and the least squares method in the design of linear predictive models. It points out that these two approaches have distinct theoretical foundations...This article explores the comparison between the probability method and the least squares method in the design of linear predictive models. It points out that these two approaches have distinct theoretical foundations and can lead to varied or similar results in terms of precision and performance under certain assumptions. The article underlines the importance of comparing these two approaches to choose the one best suited to the context, available data and modeling objectives.展开更多
Cropland nitrate leaching is the major nitrogen(N) loss pathway, and it contributes significantly to water pollution. However, cropland nitrate leaching estimates show great uncertainty due to variations in input data...Cropland nitrate leaching is the major nitrogen(N) loss pathway, and it contributes significantly to water pollution. However, cropland nitrate leaching estimates show great uncertainty due to variations in input datasets and estimation methods. Here, we presented a re-evaluation of Chinese cropland nitrate leaching, and identified and quantified the sources of uncertainty by integrating three cropland area datasets, three N input datasets, and three estimation methods. The results revealed that nitrate leaching from Chinese cropland averaged 6.7±0.6 Tg N yr^(-1)in 2010, ranging from 2.9 to 15.8 Tg N yr^(-1)across 27 different estimates. The primary contributor to the uncertainty was the estimation method, accounting for 45.1%, followed by the interaction of N input dataset and estimation method at 24.4%. The results of this study emphasize the need for adopting a robust estimation method and improving the compatibility between the estimation method and N input dataset to effectively reduce uncertainty. This analysis provides valuable insights for accurately estimating cropland nitrate leaching and contributes to ongoing efforts that address water pollution concerns.展开更多
The methods of estimating the minimum allowed value of IFOV (instantaneous field of view) of the detector in a rosette scan system are investigated. The common method for the estimation of IFOV is described. A new met...The methods of estimating the minimum allowed value of IFOV (instantaneous field of view) of the detector in a rosette scan system are investigated. The common method for the estimation of IFOV is described. A new method which uses the maximum distance between two neighboring petals as the estimated value of IFOV is developed and a comparison between the common method and the new method is given. It is concluded that the minimum allowed value of IFOV of rosette scanning is over estimated by the common method while this value can be calculated accurately with the new method.展开更多
The estimation of shear strength of rock mass discontinuity is always a focal, but difficult, problem in the field of geotechnical engineering. Considering the disadvantages and limitation of exist- ing estimation met...The estimation of shear strength of rock mass discontinuity is always a focal, but difficult, problem in the field of geotechnical engineering. Considering the disadvantages and limitation of exist- ing estimation methods, a new approach based on the shadow area percentage （SAP） that can be used to quantify surface roughness is proposed in this article. Firstly, by the help of laser scanning technique, the three-dimensional model of the surface of rock discontinuity was established. Secondly, a light source was simulated, and there would be some shadows produced on the model surface. Thirdly, to obtain the value of SAP of each specimen, the shadow detection technique was introduced for use. Fourthly, compared with the result from direct shear testing and based on statistics, an empirical for- mula was found among SAP, normal stress, and shear strength. Data of Yujian （~ River were used as an example, and the following conclusions have been made. （1） In the case of equal normal stress, the peak shear stress is positively proportional to the SAP. （2） The formula for estimating was derived, and the predictions of peak-shear strength made with this equation well agreed with the experimental re- suits obtained in laboratory tests.展开更多
Chemical waste compositions are important for municipal solid waste management, as they determine the pollution potentials from different waste strategies. A representative dataset for chemical characteristics of indi...Chemical waste compositions are important for municipal solid waste management, as they determine the pollution potentials from different waste strategies. A representative dataset for chemical characteristics of individual waste fractions is frequently required to assess chemical waste composition, but it is usually reported in developed countries and not in developing countries. In this study, a dataset for Chinese waste was established through careful data screening and assessment, named as CN dataset. Meanwhile, a dataset for Danish waste（DK dataset） was also summarized based on previous studies. In order to quantitatively evaluate the reliabilities of CN and DK datasets, the chemical waste compositions in four Chinese cities were estimated by utilizing both of them, respectively. It is indicated that the usage of CN datasets led to significantly lower discrepancies from the actual values based on laboratory analysis in most cases. Within the datasets, the moisture contents of food waste, paper, textiles, and plastics, the carbon content of food waste, as well as the oxygen content of plastics would induce significant divergences, which should be paid special attention when gathering the information. In addition, the fractional waste compositions in China showed similar features with other developing countries but differ significantly with developed countries. Thus the above-mentioned conclusions could also be true in other developing countries.展开更多
The Three-River Headwater Region（TRHR）, known as the ＂Water Tower of China＂, is an important ecological shelter for national security interests and regional sustainable development activities for many downstream r...The Three-River Headwater Region（TRHR）, known as the ＂Water Tower of China＂, is an important ecological shelter for national security interests and regional sustainable development activities for many downstream regions in China and a number of Southeast Asian countries. The TRHR is a high-elevation, cold environment with a unique, but typical alpine vegetation system. Net primary productivity（NPP） is a key vegetation parameter and ecological indicator that can reflect both natural environmental changes and carbon budget levels. Given the unique geographical environment and strategic location of the TRHR, many scholars have estimated NPP of the TRHR by using different methods; however, these estimates vary greatly for a number of reasons. To date, there is no paper that has reviewed and assessed NPP estimation studies conducted in the TRHR. Therefore, in this paper, we（1） summarized the related methods and results of NPP estimation in the TRHR in a systematic review of previous research;（2） discussed the suitability of existing methods for estimating NPP in the TRHR and highlighted the most significant challenges; and（3） assessed the estimated NPP results. Finally, developmental directions of NPP estimation in the TRHR were prospected.展开更多
In this study, a multivariate local quadratic polynomial regression(MLQPR) method is proposed to design a model for the sludge volume index(SVI). In MLQPR, a quadratic polynomial regression function is established to ...In this study, a multivariate local quadratic polynomial regression(MLQPR) method is proposed to design a model for the sludge volume index(SVI). In MLQPR, a quadratic polynomial regression function is established to describe the relationship between SVI and the relative variables, and the important terms of the quadratic polynomial regression function are determined by the significant test of the corresponding coefficients. Moreover, a local estimation method is introduced to adjust the weights of the quadratic polynomial regression function to improve the model accuracy. Finally, the proposed method is applied to predict the SVI values in a real wastewater treatment process(WWTP). The experimental results demonstrate that the proposed MLQPR method has faster testing speed and more accurate results than some existing methods.展开更多
The reasonable prior information between the parameters in the adjustment processing can significantly improve the precision of the parameter solution. Based on the principle of equality constraints, we establish the ...The reasonable prior information between the parameters in the adjustment processing can significantly improve the precision of the parameter solution. Based on the principle of equality constraints, we establish the mixed additive and multiplicative random error model with equality constraints and derive the weighted least squares iterative solution of the model. In addition, aiming at the ill-posed problem of the coefficient matrix, we also propose the ridge estimation iterative solution of ill-posed mixed additive and multiplicative random error model with equality constraints based on the principle of ridge estimation method and derive the U-curve method to determine the ridge parameter. The experimental results show that the weighted least squares iterative solution can obtain more reasonable parameter estimation and precision information than existing solutions, verifying the feasibility of applying the equality constraints to the mixed additive and multiplicative random error model. Furthermore, the ridge estimation iterative solution can obtain more accurate parameter estimation and precision information than the weighted least squares iterative solution.展开更多
基金Supported by Chinese Offshore Investigation and Assessment Project (No. 908-TJ-10,908-TJ-09)the Initial Fund for Introduced Talent of Tianjin University of Science and Technology (No. 20090413)
文摘Studies in the coastal area of Bohai Bay,China,from July 2006 to October 2007,suggest that the method of meiofaunal biomass estimation affected the meiofaunal analysis.Conventional estimation methods that use a unique mean individual weight value for nematodes to calculate total biomass may cause deviation of the results.A modified estimation method,named the Subsection Count Method (SCM),was also used to calculate meiofaunal biomass.This entails only a slight increase in workload but generates results of greater accuracy.Results gained using each of these two methods were compared in the present study.The results show that the conventional method generally estimates a meiofaunal biomass.The difference between the two estimation methods was highly significant (P<0.01) for the spring and winter cruises.Furthermore,the estimation method for meiofaunal biomass affected the analysis of horizontal distribution and correlation with environmental factors.These findings highlight the importance of estimation methods for meiofaunal biomass and will hopefully stimulate further investigation and discussion of the topic.
基金supported by National Science and Technology Support Project (Grant No. 2012BAD05B03–6)Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDA05070403)National Natural Science Foundationof China (Grant No. 41171246)
文摘The conventional method which assumes the soil distribution is continuous was unsuitable for estimating soil organic carbon density(SOCD) in Karst areas because of its discontinuous soil distribution. The accurate estimation of SOCD in Karst areas is essential for carbon sequestration assessment in China. In this study, a modified method,which considers the vertical proportion of soil area in the profile when calculating the SOCD, was developed to estimate the SOCD in a typical Karst peak-cluster depression area in southwest China. In the modified method, ground-penetrating radar(GPR) technology was used to detect the distribution and thickness of soil. The accuracy of the method was confirmed through comparison with the data obtained using a validation method, in which the soil thickness was measured by excavation. In comparison with the conventional method and average-soil-depth method,the SOCD estimated using the GPR method showed the minimum relative error with respect to that obtained using the validation method. At a regional scale, the average SOCDs at depths of 0-20 cm and 0-100 cm, which were interpolated by ordinary kriging,were 1.49(ranging from 0.03-5.65) and 2.26(0.09-11.60) kgm-2based on GPR method in our study area(covering 393.6 hm2), respectively. Therefore, the modified method can be applied on the accurate estimation of SOCD in discontinuous soil areas such as Karst regions.
文摘Accurate assessment of herbage mass(HM)in pasture is a key to budgeting forage in grazing systems worldwide.Different non-destructive techniques to measuring pasture yield are commented.The methods compared include visual estimations,manual and electronic pasture meters and remote sensing.All methods are associated with a moderate to high error,showing that some indirect methods of yield estimation are appropriate under most appropriate because many factors as climate variations,soil certain conditions.In general terms,no method was found as the characteristics,plant phenology,pasture management and species composition must be taken into account to make local calibrations from a general model.Best results were found modifying general methods under local calibrations and under local conditions.In order to give farmers the best method to manage adequately their own grazing systems,researchers must select the most suitable technique considering the scale of operation,the desired accuracy and the resources available.
文摘Stem diameter distribution information is useful in forest management planning. Weibull function is flexible, and has been used in characterising diameter distributions, especially in single-species planted stands, the world over. We evaluated some Weibull parameter estimation methods for stem diameter characterisation in （Oban） multi-species Forest in southern Nigeria. Four study sites （Aking, Ekang, Erokut and Ekuri） were selected. Four 2 km-long transects situated at 600 m apart were laid in each location. Five 50m x 50m plots were alternately laid along each transect at 400 m apart （20 plots/location） using systematic sampling technique. Tree growth variables： diameter at breast height （Dbh）, diameters at the base, middle and merchantable limit, total height, merchantable height, stem straightness, crown length and crown diameter were measured on all trees 〉 10 cm to compute model response variables such as mean diameters, basal area and stem volume. Weibull parameters estimation methods used were： moment-based, percentile-based, hybrid and maximum-likelihood （ML）. Data were analysed using descriptive statistics, regression models and ANOVA at α0.05. Percentile-based method was the best for Weibull [location （a）, scale （b） and shape （c）] parameters estimations with mLogL = 116.66±21.89, while hybrid method was least-suitable （mLogL = 690.14±128.81） for Weibull parameters estimations. Quadratic mean diameter （Dq） was the only suitable predictor of Weibull parameters in Oban Forest.
文摘With the recent advent of Intelligent Transporta- tion Systems （ITS）, and their associated data collection and archiving capabilities, there is now a rich data source for transportation professionals to develop capacity values for their own jurisdictions. Unfortunately, there is no consensus on the best approach for estimating capacity from ITS data. The motivation of this paper is to compare and contrast four of the most popular capacity estimation techniques in terms of （1） data requirements, （2） modeling effort required, （3） esti- mated parameter values, （4） theoretical background, and （5） statistical differences across time and over geographically dispersed locations. Specifically, the first method is the maximum observed value, the second is a standard funda- mental diagram curve fitting approach using the popular Van Aerde model, the third method uses the breakdown identifi- cation approach, and the fourth method is the survival prob- ability based on product limit method. These four approaches were tested on two test beds： one is located in San Diego, California, U.S., and has data from 112 work days; the other is located in Shanghai, China, and consists of 81 work days. It was found that, irrespective of the estimation methodology and the definition of capacity, the estimated capacity can vary considerably over time. The second finding was that, as ex- pected, the different approaches yielded different capacity results. These estimated capacities varied by as much as 26 % at the San Diego test site and by 34 % at the Shanghai test site. It was also found that each of the methodologies has advantages and disadvantages, and the best method will be the function of the available data, the application, and the goals of the modeler. Consequently, it is critical for users of automatic capacity estimation techniques, which utilize ITS data, to understand the underlying assumptions of each of the different approaches.
基金Sponsored by Applied Basic Research Project for Young Scholars of Shihezi University(2015ZRKXYQ06)Project of International Cooperation and Exchanges of China(2015DFA11660)
文摘Based on the main research results of estimation methods of surface solar radiation at home and abroad in recent decades, three commonly used estimation models of surface solar radiation have been introduced, and their principles, advantages and disadvantages have been analyzed to provide scientific references for further study of surface solar radiation in future.
文摘GMM inference procedures based on the square of the modulus of the model characteristic function are developed using sample moments selected using estimating function theory and bypassing the use of empirical characteristic function of other GMM procedures in the literature. The procedures are relatively simple to implement and are less simulation-oriented than simulated methods of inferences yet have the potential of good efficiencies for models with densities without closed form. The procedures also yield better estimators than method of moment estimators for models with more than three parameters as higher order sample moments tend to be unstable.
文摘<div style="text-align:justify;"> As a generalized sensor, the RPC model with its accuracy equally matches the physical sensor model. Moreover, the accurate positioning combining with the flexibility in application leads the RPC model to be the priority in photogrammetry processing. Generally, the RPC model is calculated through a control grid. Different RPC parameters solving methods and the operation efficiency all serve as variables in the accuracy of the model. In this paper, the ridge estimation iterative method, spectrum correction iteration, and conjugate gradient method are employed to solve RPC parameters;the accuracy and efficiency of three solving methods are analyzed and compared. The results show that ridge estimation iterative method and spectrum correction iteration have obvious advantages in accuracy. The ridge estimation iterative method has fewer iteration times and time con-sumption, and spectrum correction iteration has more stable precision. </div>
基金supported by the National Natural Science Foundation of China (No. 61271343)the Research Fund for the Doctoral Program of Higher Education of China (No. 20122302110012)the 2014 Innovation of Science and Technology Program of China Aerospace Science and Technology Corporation
文摘Estimating cross-range velocity is a challenging task for space-borne synthetic aperture radar（SAR）, which is important for ground moving target indication（GMTI）. Because the velocity of a target is very small compared with that of the satellite, it is difficult to correctly estimate it using a conventional monostatic platform algorithm. To overcome this problem, a novel method employing multistatic SAR is presented in this letter. The proposed hybrid method, which is based on an extended space-time model（ESTIM） of the azimuth signal, has two steps： first, a set of finite impulse response（FIR） filter banks based on a fractional Fourier transform（FrFT） is used to separate multiple targets within a range gate; second, a cross-correlation spectrum weighted subspace fitting（CSWSF） algorithm is applied to each of the separated signals in order to estimate their respective parameters. As verified through computer simulation with the constellations of Cartwheel, Pendulum and Helix, this proposed time-frequency-subspace method effectively improves the estimation precision of the cross-range velocities of multiple targets.
文摘In this paper the main sources causing the scatter of the experimental results of the material parameters are discussed. They can be divided into two parts: one is the experimental errors which are introduced because of the inaccuracy of experimental equipment, the experimental techniques, etc., and the form of the scatter caused by this source is called external distribution. The other is due to the irregularity and inhomogeneity of the material structure and the randomness of deformation process. The scatter caused by this source is inherent and then this form of the scatter is called internal distribution. Obviously the experimental distribution of material parameters combines these two distributions in some way; therefore, it is a sum distribution of the external distribution and the internal distribution. In view of this , a general method used to analyse the influence of the experimental errors on the experimental results is presented, and three criteria used to value this influence are defined. An example in which the fracture toughness KIC is analysed shows that this method is reasonable, convenient and effective.
文摘A recursive method based on successive computations of perimeters of inscribed regular polygons for estimating π is formulated by employing the Pythagorean theorem alone without resorting to any trigonometric calculations. The approach is classical but the formulation of coupled recursion relations is new. Further, use of infinite series for computing π is explored by an improved version of Leibniz’s series expansion. Finally, some remarks with reference to π are made on a relatively recently rediscovered Sumerian tablet depicting geometric figures.
基金This project was sponsored by the State Seismological Bureau (85070102), China
文摘Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the earthquake catalogue.The existing earthquake catalogue contains both historical and recent instrumental data sets and it is inadequate to use only one part.Combining the large number of historical events with recent complete records and taking the magnitude uncertainty into account,Kijko’s method gives the maximum likelihood estimation of b value and annual activity rate,which might be more realistic.On the other hand,this method considers the source zone boundary uncertainty in seismic hazard analysis,which means the earthquake activity rate across a boundary of a source zone changes smoothly instead of abruptly and avoids too large a gradient in the calculated results.
文摘This article explores the comparison between the probability method and the least squares method in the design of linear predictive models. It points out that these two approaches have distinct theoretical foundations and can lead to varied or similar results in terms of precision and performance under certain assumptions. The article underlines the importance of comparing these two approaches to choose the one best suited to the context, available data and modeling objectives.
基金supported by the National Key Research and Development Program of China (2023YFD1902703)the National Natural Science Foundation of China (Key Program) (U23A20158)。
文摘Cropland nitrate leaching is the major nitrogen(N) loss pathway, and it contributes significantly to water pollution. However, cropland nitrate leaching estimates show great uncertainty due to variations in input datasets and estimation methods. Here, we presented a re-evaluation of Chinese cropland nitrate leaching, and identified and quantified the sources of uncertainty by integrating three cropland area datasets, three N input datasets, and three estimation methods. The results revealed that nitrate leaching from Chinese cropland averaged 6.7±0.6 Tg N yr^(-1)in 2010, ranging from 2.9 to 15.8 Tg N yr^(-1)across 27 different estimates. The primary contributor to the uncertainty was the estimation method, accounting for 45.1%, followed by the interaction of N input dataset and estimation method at 24.4%. The results of this study emphasize the need for adopting a robust estimation method and improving the compatibility between the estimation method and N input dataset to effectively reduce uncertainty. This analysis provides valuable insights for accurately estimating cropland nitrate leaching and contributes to ongoing efforts that address water pollution concerns.
文摘The methods of estimating the minimum allowed value of IFOV (instantaneous field of view) of the detector in a rosette scan system are investigated. The common method for the estimation of IFOV is described. A new method which uses the maximum distance between two neighboring petals as the estimated value of IFOV is developed and a comparison between the common method and the new method is given. It is concluded that the minimum allowed value of IFOV of rosette scanning is over estimated by the common method while this value can be calculated accurately with the new method.
基金supported by the China Geological Survey (No.1212011014030)the Major State Basic Research Development Program of China (973 Program) (No.2011CB710600)
文摘The estimation of shear strength of rock mass discontinuity is always a focal, but difficult, problem in the field of geotechnical engineering. Considering the disadvantages and limitation of exist- ing estimation methods, a new approach based on the shadow area percentage （SAP） that can be used to quantify surface roughness is proposed in this article. Firstly, by the help of laser scanning technique, the three-dimensional model of the surface of rock discontinuity was established. Secondly, a light source was simulated, and there would be some shadows produced on the model surface. Thirdly, to obtain the value of SAP of each specimen, the shadow detection technique was introduced for use. Fourthly, compared with the result from direct shear testing and based on statistics, an empirical for- mula was found among SAP, normal stress, and shear strength. Data of Yujian （~ River were used as an example, and the following conclusions have been made. （1） In the case of equal normal stress, the peak shear stress is positively proportional to the SAP. （2） The formula for estimating was derived, and the predictions of peak-shear strength made with this equation well agreed with the experimental re- suits obtained in laboratory tests.
基金supported by the National Environmental Protection Standard Project(2015-4)the Shanghai Technical Standard Projects(Nos.14DZ0501500,DB31ZB5-15043)
文摘Chemical waste compositions are important for municipal solid waste management, as they determine the pollution potentials from different waste strategies. A representative dataset for chemical characteristics of individual waste fractions is frequently required to assess chemical waste composition, but it is usually reported in developed countries and not in developing countries. In this study, a dataset for Chinese waste was established through careful data screening and assessment, named as CN dataset. Meanwhile, a dataset for Danish waste（DK dataset） was also summarized based on previous studies. In order to quantitatively evaluate the reliabilities of CN and DK datasets, the chemical waste compositions in four Chinese cities were estimated by utilizing both of them, respectively. It is indicated that the usage of CN datasets led to significantly lower discrepancies from the actual values based on laboratory analysis in most cases. Within the datasets, the moisture contents of food waste, paper, textiles, and plastics, the carbon content of food waste, as well as the oxygen content of plastics would induce significant divergences, which should be paid special attention when gathering the information. In addition, the fractional waste compositions in China showed similar features with other developing countries but differ significantly with developed countries. Thus the above-mentioned conclusions could also be true in other developing countries.
基金National Key Research and Development Program of China,No.2016YFC0500205National Basic Research Program of China(973 Program),No.2015CB954103,No.2015CB954101
文摘The Three-River Headwater Region（TRHR）, known as the ＂Water Tower of China＂, is an important ecological shelter for national security interests and regional sustainable development activities for many downstream regions in China and a number of Southeast Asian countries. The TRHR is a high-elevation, cold environment with a unique, but typical alpine vegetation system. Net primary productivity（NPP） is a key vegetation parameter and ecological indicator that can reflect both natural environmental changes and carbon budget levels. Given the unique geographical environment and strategic location of the TRHR, many scholars have estimated NPP of the TRHR by using different methods; however, these estimates vary greatly for a number of reasons. To date, there is no paper that has reviewed and assessed NPP estimation studies conducted in the TRHR. Therefore, in this paper, we（1） summarized the related methods and results of NPP estimation in the TRHR in a systematic review of previous research;（2） discussed the suitability of existing methods for estimating NPP in the TRHR and highlighted the most significant challenges; and（3） assessed the estimated NPP results. Finally, developmental directions of NPP estimation in the TRHR were prospected.
文摘In this study, a multivariate local quadratic polynomial regression(MLQPR) method is proposed to design a model for the sludge volume index(SVI). In MLQPR, a quadratic polynomial regression function is established to describe the relationship between SVI and the relative variables, and the important terms of the quadratic polynomial regression function are determined by the significant test of the corresponding coefficients. Moreover, a local estimation method is introduced to adjust the weights of the quadratic polynomial regression function to improve the model accuracy. Finally, the proposed method is applied to predict the SVI values in a real wastewater treatment process(WWTP). The experimental results demonstrate that the proposed MLQPR method has faster testing speed and more accurate results than some existing methods.
基金supported by the National Natural Science Foundation of China,Grant Nos.42174011,41874001 and 41664001Innovation Found Designated for Graduate Students of ECUT,Grant No.DHYC-202020。
文摘The reasonable prior information between the parameters in the adjustment processing can significantly improve the precision of the parameter solution. Based on the principle of equality constraints, we establish the mixed additive and multiplicative random error model with equality constraints and derive the weighted least squares iterative solution of the model. In addition, aiming at the ill-posed problem of the coefficient matrix, we also propose the ridge estimation iterative solution of ill-posed mixed additive and multiplicative random error model with equality constraints based on the principle of ridge estimation method and derive the U-curve method to determine the ridge parameter. The experimental results show that the weighted least squares iterative solution can obtain more reasonable parameter estimation and precision information than existing solutions, verifying the feasibility of applying the equality constraints to the mixed additive and multiplicative random error model. Furthermore, the ridge estimation iterative solution can obtain more accurate parameter estimation and precision information than the weighted least squares iterative solution.
