The concept of the liquid Li17Pb83 and Helium gas dual-cooled Fuel Breeding Blanket (FBB) for the Fusion-Driven sub-critical System (FDS) is presented and analyzed. Taking self-sustaining tritium (TBR >1.05) and an...The concept of the liquid Li17Pb83 and Helium gas dual-cooled Fuel Breeding Blanket (FBB) for the Fusion-Driven sub-critical System (FDS) is presented and analyzed. Taking self-sustaining tritium (TBR >1.05) and annual output of 100 kg or more fissile 239Pu (FBR > 0.238) as objective parameters, and based on the three-dimensional Monte Carlo neutron-photon transport code MCNP/4A, a neutronics-optimizated calculation of different cases was carried out and the concept is proved feasible. In addition, the total breeding ratio ( BR = TBR + FBR ) is listed corresponding to different cases.展开更多
This paper derives new and exact closed-form expressions for the average symbol error rate(SER) of square M-ary quadrature amplitude modulation(M-QAM) in wireless communication systems over theα-μfading channels sub...This paper derives new and exact closed-form expressions for the average symbol error rate(SER) of square M-ary quadrature amplitude modulation(M-QAM) in wireless communication systems over theα-μfading channels subject to an additive non-Gaussian noise. The obtained expressions take into account static and mobile wireless receivers. In addition, a closed-form expression for the outage probability in mobile networks is obtained. Please note that all derived expressions in this paper a valid for integer and non-integer values of the fading parameters. Analytical results are presented to study the impact of noise shaping parameter, severity of fading, and mobility on the average SER. Monte-Carlo simulations results are also provided to validate the accuracy of the analytical results.展开更多
This paper proposes a steady-state errors correction(SSEC)method for eliminating measurement errors.This method is based on the detections of error signal E(s)and output C(s)which generate an expected output R(s).In c...This paper proposes a steady-state errors correction(SSEC)method for eliminating measurement errors.This method is based on the detections of error signal E(s)and output C(s)which generate an expected output R(s).In comparison with the conventional solutions which are based on detecting the expected output R(s)and output C(s)to obtain error signal E(s),the measurement errors are eliminated even the error might be at a significant level.Moreover,it is possible that the individual debugging by regulating the coefficient K for every member of the multiple objectives achieves the optimization of the open loop gain.Therefore,this simple method can be applied to the weak coupling and multiple objectives system,which is usually controlled by complex controller.The principle of eliminating measurement errors is derived analytically,and the advantages comparing with the conventional solutions are depicted.Based on the SSEC method analysis,an application of this method for an active power filter(APF)is investigated and the effectiveness and viability of the scheme are demonstrated through the simulation and experimental verifications.展开更多
An N-gram Chinese language model incorporating linguistic rules is presented. By constructing elements lattice, rules information is incorporated in statistical frame. To facilitate the hybrid modeling, novel methods ...An N-gram Chinese language model incorporating linguistic rules is presented. By constructing elements lattice, rules information is incorporated in statistical frame. To facilitate the hybrid modeling, novel methods such as MI-based rule evaluating, weighted rule quantification and element-based n-gram probability approximation are presented. Dynamic Viterbi algorithm is adopted to search the best path in lattice. To strengthen the model, transformation-based error-driven rules learning is adopted. Applying proposed model to Chinese Pinyin-to-character conversion, high performance has been achieved in accuracy, flexibility and robustness simultaneously. Tests show correct rate achieves 94.81% instead of 90.53% using bi-gram Markov model alone. Many long-distance dependency and recursion in language can be processed effectively.展开更多
In this paper, a fully third-order accurate projection method for solving the incompressible Navier-Stokes equations is proposed. To construct the scheme, a continuous projection procedure is firstly presented. We the...In this paper, a fully third-order accurate projection method for solving the incompressible Navier-Stokes equations is proposed. To construct the scheme, a continuous projection procedure is firstly presented. We then derive a sufficient condition for the continuous projection equations to be temporally third-order accurate approximations of the original Navier-Stokes equations by means of the localtruncation-error-analysis technique. The continuous projection equations are discretized temporally and spatially to third-order accuracy on the staggered grids, resulting in a fully third-order discrete projection scheme. The possibility to design higher-order projection methods is thus demonstrated in the present paper. A heuristic stability analysis is performed on this projection method showing the probability of its being stable. The stability of the present scheme is further verified through numerical tests. The third-order accuracy of the present projection method is validated by several numerical test cases.展开更多
Desktop 3D printers have revolutionized how designers and makers prototype and manufacture certain products.Highly popular fuse deposition modeling(FDM)desktop printers have enabled a shift to low-cost consumer goods ...Desktop 3D printers have revolutionized how designers and makers prototype and manufacture certain products.Highly popular fuse deposition modeling(FDM)desktop printers have enabled a shift to low-cost consumer goods markets,through reduced capital equipment investment and consumable material costs.However,with this drive to reduce costs,the computer numerical control(CNC)systems implemented in FDM printers are often compromised by poor accuracy and contouring errors.This condition is most critical as users begin to use 3D-printed components in load-bearing applications or to perform mechanical functions.Improved methods of low-cost 3D printer calibration are needed before their open-design potential can be realized in applications,including 3D-printed orthotics and prosthetics.This paper applies methodologies associated with high-precision CNC machining systems,namely,kinematic error modeling and compensation coupled with standardized test methods from ISO230-4,such as the ballbar for kinematic and dynamic error measurements,to examine the influence and feasibility for use on low-cost CNC/3D printing platforms.Recently,the U.S.Food and Drug Administration's"Technical considerations for additive manufactured medical devices"highlighted the need to develop standards specific to additive manufacturing in regulated manufacturing environments.This paper shows the benefits of the methods described within ISO230-4 for error assessment,alongside applying kinematic error modeling and compensation to the popular kinematic configuration of an Ultimaker 3D printer.A Renishaw ballbar QC10 is used to quantify the Ultimaker's errors and thereby populate the error model.This method quantifies machine errors and populates these in a mathematical model of the CNC system.Then,a post-processor can be used to compensate the printing code.Subsequently,the ballbar is used to demonstrate the dramatic impact of the error compensation model on the accuracy and contouring of the Ultimaker printer with 58%reduction in overall circularity error and 90%reduction in squareness error.展开更多
Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and effic...Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and efficiency of the SWA in Ku-band. Firstly, the roughness is simulated using the electromechanical coupled（EC） model. The relationship between roughness and the antenna＇s radiation properties is obtained. For verification, an antenna proto- type is manufactured and tested, and the simulation method is introduced. According to the prototype, a contrasting experiment dealing with the flatness of the radiating plane is conducted to test the simulation method. The advantage of the EC model is validated by comparisons of the EC model and two classical roughness models （sine wave and fractal function）, which shows that the EC model gives a more accurate description model for roughness, the maxi- mum error is 13%. The existence of roughness strongly broadens the beamwidth and raises the side-lobe level of SWA, which is 1.2 times greater than the ideal antenna. In addition, effect of the EC model＇s evaluation indices is investigated, the most affected scale of the roughness is found, which is 1/10 of the working wavelength. The proposed research provides the instruction for antenna designing and manufacturing.展开更多
Generalized Jacobi polynomials with indexes α,β∈ R are introduced and some basic properties are established. As examples of applications,the second- and fourth-order elliptic boundary value problems with Dirichlet ...Generalized Jacobi polynomials with indexes α,β∈ R are introduced and some basic properties are established. As examples of applications,the second- and fourth-order elliptic boundary value problems with Dirichlet or Robin boundary conditions are considered,and the generalized Jacobi spectral schemes are proposed. For the diagonalization of discrete systems,the Jacobi-Sobolev orthogonal basis functions are constructed,which allow the exact solutions and the approximate solutions to be represented in the forms of infinite and truncated Jacobi series. Error estimates are obtained and numerical results are provided to illustrate the effectiveness and the spectral accuracy.展开更多
An effective near-field - far-field (NF - FF) transformation with spherical scanning for quasi-planar antennas from irregularly spaced data is developed in this paper. Two efficient approaches for evaluating the regul...An effective near-field - far-field (NF - FF) transformation with spherical scanning for quasi-planar antennas from irregularly spaced data is developed in this paper. Two efficient approaches for evaluating the regularly spaced spherical samples from the nonuniformly distributed ones are proposed and numerically compared. Both the approaches rely on a nonredundant sampling representation of the voltage measured by the probe, based on an oblate ellipsoidal modelling of the antenna under test. The former employs the singular value decomposition method to reconstruct the NF data at the points fixed by the nonredundant sampling representation and can be applied when the irregularly acquired samples lie on nonuniform parallels. The latter is based on an iterative technique and can be used also when such a hypothesis does not hold, but requires the existence of a biunique correspondence between the uniform and nonuniform samples, associ- ating at each uniform sampling point the nearest irregular one. Once the regularly spaced spherical samples have been recovered, the NF data needed by a probe compensated NF - FF transformation with spherical scanning are efficiently evaluated by using an optimal sampling interpolation algorithm. It is so possible to accurately compensate known posi- tioning errors in the NF - FF transformation with spherical scanning for quasi-planar antennas. Some numerical tests assessing the accuracy and the robustness of the proposed approaches are reported.展开更多
Cooperative relaying has played an important role in rapid evolution of wireless communications.The cooperative performance strongly depends on the selected relays.In this paper,we concentrate on relay selection in am...Cooperative relaying has played an important role in rapid evolution of wireless communications.The cooperative performance strongly depends on the selected relays.In this paper,we concentrate on relay selection in amplify-and-forward(AF)cooperative communication system,and an optimal multi-relay selection scheme is put forward to minimize the average symbol error rate(SER)of the system.Firstly,for the minimum average SER,on the basis of the statistic channel information,we define a parameter named equivalent channel gain which describes the channel status of two phases in the cooperative process.Then,under the constraint of equal power allocation,an optimal relay selection scheme is proposed in ascending order of equivalent channel gain(ECG).The scheme implies that the suitable number of relay nodes should be selected under the different signal-to-noise ratio(SNR)ranges to minimize the average SER.Computer simulation results show that the average SER rate of the proposed scheme is lower than these of the other schemes.展开更多
Accident at Fukushima Dai-ichi nuclear power plant significantly affected the nuclear industry at time when everybody was expecting the so called nuclear renaissance. There is no question that the accident has at leas...Accident at Fukushima Dai-ichi nuclear power plant significantly affected the nuclear industry at time when everybody was expecting the so called nuclear renaissance. There is no question that the accident has at least slowed it down. Research on this accident is taking place all over the world, in this paper, we present the findings of research on Fukushima nuclear power plant accident in relation to the Czech Republic. The paper focuses on the analysis of human performance during the accident. Lessons learned from the accident and main human errors are presented. First, the brief factors affecting the human performance are discussed. They are followed by the short description of activities on units 1-3. The key human errors in the accident mitigation are then identified. On unit 1, the fuel damage was probably impossible to prevent, however, on units 2 and 3, it could be probably prevented.展开更多
基金This work was supported by the Chinese Academy of Sciences and the National Natural Science Foundation of China No.10175068.
文摘The concept of the liquid Li17Pb83 and Helium gas dual-cooled Fuel Breeding Blanket (FBB) for the Fusion-Driven sub-critical System (FDS) is presented and analyzed. Taking self-sustaining tritium (TBR >1.05) and annual output of 100 kg or more fissile 239Pu (FBR > 0.238) as objective parameters, and based on the three-dimensional Monte Carlo neutron-photon transport code MCNP/4A, a neutronics-optimizated calculation of different cases was carried out and the concept is proved feasible. In addition, the total breeding ratio ( BR = TBR + FBR ) is listed corresponding to different cases.
基金the support of SNCS Research Center and the Deanship of Scientific Research at the University of Tabukfinancial and inkind support for the project no. S-1438-0161
文摘This paper derives new and exact closed-form expressions for the average symbol error rate(SER) of square M-ary quadrature amplitude modulation(M-QAM) in wireless communication systems over theα-μfading channels subject to an additive non-Gaussian noise. The obtained expressions take into account static and mobile wireless receivers. In addition, a closed-form expression for the outage probability in mobile networks is obtained. Please note that all derived expressions in this paper a valid for integer and non-integer values of the fading parameters. Analytical results are presented to study the impact of noise shaping parameter, severity of fading, and mobility on the average SER. Monte-Carlo simulations results are also provided to validate the accuracy of the analytical results.
基金National Natural Science Foundation of China(No.61273172)
文摘This paper proposes a steady-state errors correction(SSEC)method for eliminating measurement errors.This method is based on the detections of error signal E(s)and output C(s)which generate an expected output R(s).In comparison with the conventional solutions which are based on detecting the expected output R(s)and output C(s)to obtain error signal E(s),the measurement errors are eliminated even the error might be at a significant level.Moreover,it is possible that the individual debugging by regulating the coefficient K for every member of the multiple objectives achieves the optimization of the open loop gain.Therefore,this simple method can be applied to the weak coupling and multiple objectives system,which is usually controlled by complex controller.The principle of eliminating measurement errors is derived analytically,and the advantages comparing with the conventional solutions are depicted.Based on the SSEC method analysis,an application of this method for an active power filter(APF)is investigated and the effectiveness and viability of the scheme are demonstrated through the simulation and experimental verifications.
文摘An N-gram Chinese language model incorporating linguistic rules is presented. By constructing elements lattice, rules information is incorporated in statistical frame. To facilitate the hybrid modeling, novel methods such as MI-based rule evaluating, weighted rule quantification and element-based n-gram probability approximation are presented. Dynamic Viterbi algorithm is adopted to search the best path in lattice. To strengthen the model, transformation-based error-driven rules learning is adopted. Applying proposed model to Chinese Pinyin-to-character conversion, high performance has been achieved in accuracy, flexibility and robustness simultaneously. Tests show correct rate achieves 94.81% instead of 90.53% using bi-gram Markov model alone. Many long-distance dependency and recursion in language can be processed effectively.
基金The project supported by the China NKBRSF(2001CB409604)
文摘In this paper, a fully third-order accurate projection method for solving the incompressible Navier-Stokes equations is proposed. To construct the scheme, a continuous projection procedure is firstly presented. We then derive a sufficient condition for the continuous projection equations to be temporally third-order accurate approximations of the original Navier-Stokes equations by means of the localtruncation-error-analysis technique. The continuous projection equations are discretized temporally and spatially to third-order accuracy on the staggered grids, resulting in a fully third-order discrete projection scheme. The possibility to design higher-order projection methods is thus demonstrated in the present paper. A heuristic stability analysis is performed on this projection method showing the probability of its being stable. The stability of the present scheme is further verified through numerical tests. The third-order accuracy of the present projection method is validated by several numerical test cases.
基金supported by Science Foundation Ireland through the I-Form Advanced Manufacturing Research Centre 16/RC/3872
文摘Desktop 3D printers have revolutionized how designers and makers prototype and manufacture certain products.Highly popular fuse deposition modeling(FDM)desktop printers have enabled a shift to low-cost consumer goods markets,through reduced capital equipment investment and consumable material costs.However,with this drive to reduce costs,the computer numerical control(CNC)systems implemented in FDM printers are often compromised by poor accuracy and contouring errors.This condition is most critical as users begin to use 3D-printed components in load-bearing applications or to perform mechanical functions.Improved methods of low-cost 3D printer calibration are needed before their open-design potential can be realized in applications,including 3D-printed orthotics and prosthetics.This paper applies methodologies associated with high-precision CNC machining systems,namely,kinematic error modeling and compensation coupled with standardized test methods from ISO230-4,such as the ballbar for kinematic and dynamic error measurements,to examine the influence and feasibility for use on low-cost CNC/3D printing platforms.Recently,the U.S.Food and Drug Administration's"Technical considerations for additive manufactured medical devices"highlighted the need to develop standards specific to additive manufacturing in regulated manufacturing environments.This paper shows the benefits of the methods described within ISO230-4 for error assessment,alongside applying kinematic error modeling and compensation to the popular kinematic configuration of an Ultimaker 3D printer.A Renishaw ballbar QC10 is used to quantify the Ultimaker's errors and thereby populate the error model.This method quantifies machine errors and populates these in a mathematical model of the CNC system.Then,a post-processor can be used to compensate the printing code.Subsequently,the ballbar is used to demonstrate the dramatic impact of the error compensation model on the accuracy and contouring of the Ultimaker printer with 58%reduction in overall circularity error and 90%reduction in squareness error.
基金Supported by National Natural Science Foundation of China(Grant Nos.51305322,51405364,51475348)
文摘Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and efficiency of the SWA in Ku-band. Firstly, the roughness is simulated using the electromechanical coupled（EC） model. The relationship between roughness and the antenna＇s radiation properties is obtained. For verification, an antenna proto- type is manufactured and tested, and the simulation method is introduced. According to the prototype, a contrasting experiment dealing with the flatness of the radiating plane is conducted to test the simulation method. The advantage of the EC model is validated by comparisons of the EC model and two classical roughness models （sine wave and fractal function）, which shows that the EC model gives a more accurate description model for roughness, the maxi- mum error is 13%. The existence of roughness strongly broadens the beamwidth and raises the side-lobe level of SWA, which is 1.2 times greater than the ideal antenna. In addition, effect of the EC model＇s evaluation indices is investigated, the most affected scale of the roughness is found, which is 1/10 of the working wavelength. The proposed research provides the instruction for antenna designing and manufacturing.
基金the National Natural Science Foundation of China (Nos.11571238,11601332,91130014,11471312 and 91430216).
文摘Generalized Jacobi polynomials with indexes α,β∈ R are introduced and some basic properties are established. As examples of applications,the second- and fourth-order elliptic boundary value problems with Dirichlet or Robin boundary conditions are considered,and the generalized Jacobi spectral schemes are proposed. For the diagonalization of discrete systems,the Jacobi-Sobolev orthogonal basis functions are constructed,which allow the exact solutions and the approximate solutions to be represented in the forms of infinite and truncated Jacobi series. Error estimates are obtained and numerical results are provided to illustrate the effectiveness and the spectral accuracy.
文摘An effective near-field - far-field (NF - FF) transformation with spherical scanning for quasi-planar antennas from irregularly spaced data is developed in this paper. Two efficient approaches for evaluating the regularly spaced spherical samples from the nonuniformly distributed ones are proposed and numerically compared. Both the approaches rely on a nonredundant sampling representation of the voltage measured by the probe, based on an oblate ellipsoidal modelling of the antenna under test. The former employs the singular value decomposition method to reconstruct the NF data at the points fixed by the nonredundant sampling representation and can be applied when the irregularly acquired samples lie on nonuniform parallels. The latter is based on an iterative technique and can be used also when such a hypothesis does not hold, but requires the existence of a biunique correspondence between the uniform and nonuniform samples, associ- ating at each uniform sampling point the nearest irregular one. Once the regularly spaced spherical samples have been recovered, the NF data needed by a probe compensated NF - FF transformation with spherical scanning are efficiently evaluated by using an optimal sampling interpolation algorithm. It is so possible to accurately compensate known posi- tioning errors in the NF - FF transformation with spherical scanning for quasi-planar antennas. Some numerical tests assessing the accuracy and the robustness of the proposed approaches are reported.
基金National Natural Science Foundation of China(No.61072088,No.61101113and No.61201198)Beijing Natural Science Foundation of China(No.4132019,No.4132015and No.4132007)Doctorate Subject Foundation of the Ministry of Education(No.20111103120017)
文摘Cooperative relaying has played an important role in rapid evolution of wireless communications.The cooperative performance strongly depends on the selected relays.In this paper,we concentrate on relay selection in amplify-and-forward(AF)cooperative communication system,and an optimal multi-relay selection scheme is put forward to minimize the average symbol error rate(SER)of the system.Firstly,for the minimum average SER,on the basis of the statistic channel information,we define a parameter named equivalent channel gain which describes the channel status of two phases in the cooperative process.Then,under the constraint of equal power allocation,an optimal relay selection scheme is proposed in ascending order of equivalent channel gain(ECG).The scheme implies that the suitable number of relay nodes should be selected under the different signal-to-noise ratio(SNR)ranges to minimize the average SER.Computer simulation results show that the average SER rate of the proposed scheme is lower than these of the other schemes.
文摘Accident at Fukushima Dai-ichi nuclear power plant significantly affected the nuclear industry at time when everybody was expecting the so called nuclear renaissance. There is no question that the accident has at least slowed it down. Research on this accident is taking place all over the world, in this paper, we present the findings of research on Fukushima nuclear power plant accident in relation to the Czech Republic. The paper focuses on the analysis of human performance during the accident. Lessons learned from the accident and main human errors are presented. First, the brief factors affecting the human performance are discussed. They are followed by the short description of activities on units 1-3. The key human errors in the accident mitigation are then identified. On unit 1, the fuel damage was probably impossible to prevent, however, on units 2 and 3, it could be probably prevented.
