The aim was to further research soil erosion characteristics and accurately predict soil erosion amount in karst areas. Based on field surveys and research achievements available, yellow soils, which are widely distri...The aim was to further research soil erosion characteristics and accurately predict soil erosion amount in karst areas. Based on field surveys and research achievements available, yellow soils, which are widely distributed, were chosen as test soil samples and slope, rain intensity, vegetation coverage and bare-rock ratio were taken as soil erosion factors. Artificial rain simulation instruments （needle-type） were made use of to simulate correlation of rain intensity, vegetation coverage, and bare-rock ratio with soil erosion quantity. Furthermore, multiple-factor linear regression analysis, stepwise regression analysis and multiple-factor non-linear regression analy- sis were made to establish a multiple-factor formula of soil erosion modulus with dif- ferent slopes and select regression models with high correlation coefficients. The re- sults show that a non-linear regression model reached extremely significant level or significant level （0.692〈FF〈0.988） and linear regression model achieved significant lev- el （0.523〈FF〈0.634）. The effects of erosion modulus changed from decreasing to in- creasing and the erosion factors from high to low were rain intensity, vegetation cov- erage and bare-rock ratio when slope gradient was at 6~, 16~, 26~ and 36~. The mod- el is of high accuracy for predicting gentle slope and abtupt slope, which reveals correlation of erosion modulus with erosion factors in karst areas.展开更多
Due to the impoundment of the Yangtze River, the Three Gorges Dam in China fosters high land-use dynamics. Soil erosion is expected to increase dramatically. One of the key factors in soil erosion control is the veget...Due to the impoundment of the Yangtze River, the Three Gorges Dam in China fosters high land-use dynamics. Soil erosion is expected to increase dramatically. One of the key factors in soil erosion control is the vegetation cover and crop type. However, determining these factors adequately for the use in soil erosion modeling is very time-consuming especially for large mountainous areas, such as the Xiangxi （香溪） catchment in the Three Gorges area. In our study, the crop and management factor C was calculated using the fractional vegetation cover （CFvc） based on Landsat-TM images from 2005, 2006, and 2007 and on literature studies （CLIT）. In 2007, the values of CFvc range between 0.001 and 0.98 in the Xiangxi catchment. The mean CFVC value is 0.05. CLIT values are distinctly higher, ranging from 0.08 to 0.46 with a mean value of 0.32 in the Xiangxi catchment. The mean potential soil loss amounts to 120.62 t/ha/a in the Xiangxi catchment when using CLIT for modeling. Based on CFVC, the predicted mean soil loss in the Xiangxi catchment is 11.50 t/ha/a. Therefore, CLIT appears to bemore reliable than the C factor based on the fractional vegetation cover.展开更多
Soil erosion models can be understood as a virtual laboratory that brings together data, observations and knowledge from different fields for sustainable environmental management. The present study was carried out on ...Soil erosion models can be understood as a virtual laboratory that brings together data, observations and knowledge from different fields for sustainable environmental management. The present study was carried out on Sebeya catchment which is located in the Western Province of Rwanda. The main objective of this study was to develop a Universal Soil Loss Equation type of erosion model to be used in predicting soil loss and associated crop yields for sustainable agriculture management in Sebeya catchment at the level of parcels. USLE parameters were determined on each parcel in Sebeya catchment using map overlapping techniques as applied in Geographical Information System (GIS). Applying a combination of 0, 1, 2 and 3 soil erosion control measures on each of 259,673 parcels, the simulated annual soil loss for Sebeya catchment was 849.94;143.27;88.64 and 28.59 t/ha/yr respectively. Soil Loss and Crop Yield (SOLCY) model has been developed to predict soil loss and crop yields for each main cultivated crop in Sebeya catchment. A combination of 3 soil erosion control measures such as (bench terrace + mulching + drainage channels) has been found to be the most effective in reducing soil erosion on each parcel with slope range of (16 - 60)%. Farmers and agriculture technicians can use SOLCY model. Finally, researchers should develop similar models on other catchments based on SOLCY model design concept.展开更多
Recent advances in computer with geographic information system(GIS) technologies have allowed modelers to develop physics-based models for modeling soil erosion processes in time and space.However, it has been widely ...Recent advances in computer with geographic information system(GIS) technologies have allowed modelers to develop physics-based models for modeling soil erosion processes in time and space.However, it has been widely recognized that the effect of uncertainties on model predictions may be more significant when modelers apply such models for their own modeling purposes.Sources of uncertainty involved in modeling include data, model structural, and parameter uncertainty.To deal with the uncertain parameters of a catchment-scale soil erosion model(CSEM) and assess simulation uncertainties in soil erosion, particle filtering modeling(PF) is introduced in the CSEM.The proposed method, CSEM-PF, estimates parameters of non-linear and non-Gaussian systems, such as a physics-based soil erosion model by assimilating observation data such as discharge and sediment discharge sequences at outlets.PF provides timevarying feasible parameter sets as well as uncertainty bounds of outputs while traditional automatic calibration techniques result in a time-invariant global optimal parameter set.CSEM-PF was applied to a small mountainous catchment of the Yongdamdam in Korea for soil erosion modeling and uncertainty assessment for three historical typhoon events.Finally, the most optimal parameter sets and uncertainty bounds of simulation of both discharge and sediment discharge at each time step of the study events are provided.展开更多
In this study, non-cumulative slope length(NCSL) calculation method and spatial analytical calculation(SAC) method were respectively applied to extract slope length and slope length factor from 10 sample areas, which ...In this study, non-cumulative slope length(NCSL) calculation method and spatial analytical calculation(SAC) method were respectively applied to extract slope length and slope length factor from 10 sample areas, which are located in Ansai County, north Shaanxi Province. The comparison of computation precision between variable DEM resolutions showed that NCSL was superior to SAC entirely. And the results were best when the DEM resolutions were 5 and 10 m. Besides, the results of slope length factor were nearly the same under the two conditions. So DEM of 10 m resolution can be used to extract slope length.展开更多
Soil erosion models are effective tools for assessing soil erosion indicators and simulating erosion processes.China has some of the most severe soil erosion in the world.To better apply soil erosion models to address...Soil erosion models are effective tools for assessing soil erosion indicators and simulating erosion processes.China has some of the most severe soil erosion in the world.To better apply soil erosion models to address soil erosion issues,it is necessary to understand the development process and current status of soil erosion modeling research in China.In this study,a combination of bibliometric analysis and statistical methods was used to review and organize Chinese soil erosion models(1982-2022)from various perspectives,including keywords,model operations,model classification,model spatiotemporal scales,and model geographical applications.This findings of this analysis indicate that the study of soil erosion models in China mainly focuses on large scales(regional and large river basins)using empirical models including USLE,RUSLE,and CSLE.The research areas are primarily concentrated in southeastern and central China.The research content has gradually shifted from studying soil erosion characteristics to analyzing influencing factors,spatiotemporal evolution of erosion,and erosion process and morphology stages.However,there are several issues in current Chinese soil erosion modeling research.These include a lack of validation of model application results with field measurements,limited application areas for the models,and relatively weak research on erosion process mechanisms.On this basis,it is recommended that future research should increase the observation of soil erosion processes and establish methods for data or mathematical formula conversion based on different geographical environments.Also,there is a need to strengthen research on erosion process mechanisms.The findings of this study should provide a valuable resource for researchers to future understand the development process and current issues of Chinese soil erosion models,providing insights for future research directions.展开更多
Beach groynes are structures for erosion protection along sandy coasts near inlets and can reduce the coastal erosion substantially,but open groynes cannot stop erosion completely because sand can be removed from the ...Beach groynes are structures for erosion protection along sandy coasts near inlets and can reduce the coastal erosion substantially,but open groynes cannot stop erosion completely because sand can be removed from the groyne compartments by cross-shore processes.Beach groynes should be designed with sufficient bypassing of sand to minimise erosion.Regular beach maintenance is required to keep a sufficient beach width for recreational purposes.The effectiveness of groyne compartments can be significantly improved by using T-head groynes or by using a submerged sill or breakwater in between the groynes.An economic evaluation shows that the beach maintenance costs over 50 years may be substantially higher than the construction costs of a submerged breakwater.An important parameter to be studied is the longshore transport,which requires detailed information of the wave climate,preferably based on measured data(offshore buoys)in combination with deep water wave modelling.Various models have been used to determine the net longshore sand transport and coastline changes.The design of groynes to reduce coastal erosion is illustrated by three field cases(Atlantic coast near Soulac,France;Lagos coast,Nigeria and Black Sea coast,Romania).These example cases show that beach groynes are effective structures,but sufficient bypassing of longshore sand transport is essential to minimise erosion.Regular beach fills in the groyne compartments may be required at high-energy(exposed)coasts.A submerged or emerged breakwater can be built between the groynes to protect the beach in the groyne compartments against erosion by cross-shore processes.展开更多
The revised Morgan,Morgan and Finney(rMMF)water erosion model calculates annual surface runoff and soil loss from field-sized areas.The original version of the rMMF is neither suited to calculate water erosion along i...The revised Morgan,Morgan and Finney(rMMF)water erosion model calculates annual surface runoff and soil loss from field-sized areas.The original version of the rMMF is neither suited to calculate water erosion along irregular hillslopes,nor capable to allow infiltration of once generated surface runoff at places where the runoff speed slows down,and infiltration could occur under natural conditions.The aim of this article is to describe a new hillslope version of the rMMF model that allows infiltration of surface runoff,and to show examples of soil erosion modelling along real and hypothetical hillslopes.The new hillslope version(hMMF)splits the entire hillslope into a number of sections that have individual properties,such as slope angle,slope length,soil properties and vegetation characteristics.The surface runoff along the slope is calculated by summing the volume of surface runoff generated in a particular section with the surface runoff coming from the immediate upsiope section.The related sediment transport is calculated for each section using the calculated detachment for the section,the sediment coming from the upsiope section and the transport capacity.A new variable is introduced to account for infiltration of surface runoff and allows simulating the effects of soil and water conservation structures on water erosion.The model was tested using measured data from plots in Africa,Asia,the US and Europe,as well as for a surveyed hillslope in Tunisia(Barbara watershed).Overall,the performance of the hMMF was reasonable for surface runoff and poor for soil loss when recommended input variable values are used.Calibration of the model resulted in a good performance,which shows the capability of the hMMF model to reproduce measured surface runoff and erosion amounts.In addition,realistic water erosion patterns on hillslopes with soil and water conservation can be simulated.展开更多
In oil drilling processes,sand production in the oil layer is a common issue,generally mitigated by means of sand control screens.To prevent or reduce the risk of damage of these screens and to improve the related ser...In oil drilling processes,sand production in the oil layer is a common issue,generally mitigated by means of sand control screens.To prevent or reduce the risk of damage of these screens and to improve the related service life,it is necessary to investigate the related erosion dynamics.In this study,a screen mesh model based on the flow field similarity theory is proposed to overcome the otherwise too complex geometric structure of this type of equipment.Such model is optimized using experimental data.The predicted results are in good agreement with the measured values,and the error is less than 15%.The results also show that the simplified geometric screen model and the optimized Zhang et al.erosion model have high reliability;therefore,they could effective be used to select underground screen meshes and improve the design of production process.展开更多
Soil erosion has been identified as one of the most destructive forms of land degradation,posing a threat to the sustainability of global economic,social and environmental systems.This underscores the need for sustain...Soil erosion has been identified as one of the most destructive forms of land degradation,posing a threat to the sustainability of global economic,social and environmental systems.This underscores the need for sustainable land management that takes erosion control and prevention into consideration.This requires the use of state-of-the-art erosion prediction models.The models often require extensive input of detailed spatial and temporal data,some of which are not readily available in many developing countries,particularly detailed soil data.The soil dataset Global Gridded Soil Information(SoilGrids)could potentially fill the data gap.Nevertheless,its value and accuracy for soil erosion modelling in the humid tropics is still unknown,necessitating the need to assess its value vis-à-vis field-based data.The major objective of this study was to conduct a comparative assessment of the value of SoilGrids and field-based soil data for estimating soil loss.Soil samples were collected from five physiographic positions(summit,shoulder,back slope,foot slope,and toe slope)using the soil catena approach.Samples were collected using a 5-cm steel sample ring(undisturbed)and a spade(disturbed).Data of the landform,predominant vegetation types,canopy cover,average plant height,land use,soil depth,shear strength,and soil color were recorded for each site.The soil samples were subjected to laboratory analysis for saturated hydraulic conductivity,bulk density,particle size distribution,and organic matter content.Pedotransfer functions were applied on the SoilGrids and field-based data to generate soil hydrological properties.The resultant field-based data were compared with the SoilGrids data for corresponding points/areas to determine the potential similarities of the two datasets.Both datasets were then used as inputs for soil erosion assessment using the revised Morgan-Morgan-Finney model.The results from both datasets were again compared to determine the degree of similarity.The results showed that with respect to point-based comparison,both datasets were significantly different.At the hillslope delineation level,the field-based data still consistently had a greater degree of variability,but the hillslope averages were not significantly different for both datasets.Similar results were recorded with the soil loss parameters generated from both datasets;point-based comparison showed that both datasets were significantly different,whereas the reverse was true for parcel/area-based comparison.SoilGrids data are certainly useful,especially where soil data are lacking;the utility of this dataset is,however,dependent on the scale of operation or the extent of detail required.When detailed,site-specific data are required,SoilGrids may not be a good alternative to soil survey data in the humid tropics.On the other hand,if the average soil properties of a region,area,or land parcel are required for the implementation of a particular project,plan,or program,SoilGrids data can be a very valuable alternative to soil survey data.展开更多
Wind erosion represents a formidable environmental challenge and has serious negative impacts on soil health and agricultural productivity, particularly in arid and semi-arid areas. The complex dynamics of wind erosio...Wind erosion represents a formidable environmental challenge and has serious negative impacts on soil health and agricultural productivity, particularly in arid and semi-arid areas. The complex dynamics of wind erosion make its large-scale monitoring and quantification a daunting task. To facilitate the monitoring and quantification of wind erosion, various scientific approaches and methods have been employed. These include sophisticated wind erosion equations and models, wind tunnel experiments, and the application of radionuclides. Additionally, researchers have assessed soil physicochemical properties, used anemometers for wind speed measurement, and deployed dust collectors for particle capture. Remote sensing technologies, wind erosion monitoring stations, and evaluations of wind barriers have also been utilized. Recently, the adoption of machine learning methods has gained popularity. Despite their value, each of these techniques has limitations in capturing the full spectrum of the wind erosion process. This paper examines these limitations and assesses the effectiveness of each method in the context of wind erosion studies. It also outlines directions for future research and suggests pathways that could enhance the understanding and management of wind erosion.展开更多
Erosion is one of the most concerning issues in pipeline flow assurance for the Oil&Gas pipeline industries,which can easily lead to wall thinning,perforation leakage,and other crucial safety risks to the steady o...Erosion is one of the most concerning issues in pipeline flow assurance for the Oil&Gas pipeline industries,which can easily lead to wall thinning,perforation leakage,and other crucial safety risks to the steady operation of pipelines.In this research,a novel experimental device is designed to investigate the erosion characteristics of 304 stainless and L245 carbon steel in the gas-solid two-phase flow.Regarding the impacts on erosion rate,the typical factors such as gas velocity,impact angle,erosion time,particle material and target material are individually observed and comprehensive analyzed with the assistance of apparent morphology characterized via Scanning Electron Microscope.Experimental results show that the severest erosion occurs when the angle reaches approximate 30°whether eroded by type I or type II particles,which is observed in both two types of steel.Concretely,304 stainless steel and L245 carbon steel appear to be cut at low angles,and impacted at high angles to form erosion pits.In the steady operational state,the erosion rate is insensitive to the short erosion time and free from the influences caused by the“erosion latent period”.Based on the comparison between experimental data and numerical results generated by existing erosion models,a modified model with low tolerance(<3%),high feasibility and strong consistency is proposed to make an accurate prediction of the erosion in terms of two types of steel under various industrial conditions.展开更多
The leaching of chromium from stainless steel dust （SSD） is deleterious to the environment. To address this issue, the reduction of SSD briquettes can be employed to effectively extract chromium. The recovery rates ...The leaching of chromium from stainless steel dust （SSD） is deleterious to the environment. To address this issue, the reduction of SSD briquettes can be employed to effectively extract chromium. The recovery rates of iron, chromium, and nickel via ironbath reduction of SSD briquettes were determined using X-ray fluorescence spectroscopy, X-ray diffraction, and scanning electron microscopy measurements. First, the effects of basicity and contents of silicon, iron, CaF2, and carbon on the recovery rates of the three metals were analyzed using the slag amount prediction model, which was originally established from the A1203 balance of corundum crucible erosion behavior. Second, the effect of feeding mode, i.e., whether steel scrap and SSD briquettes were simultaneously added, on the recovery rates was discussed in detail. Third, the iron-bath reduction of SSD briquettes was thermodynamically analyzed. The results indicated that the recovery rates of the three metals are greater than 95% those of using a basicity of 1.5 and 6.0% CaF2, 15% carbon, and 7% ferrosilicon. The recovery rate of chromium increases twofold with the addition of ferrosilicon. The feeding mode of adding briquettes and steel scrap simultaneously is better for recovery of metals and separation of the metal and slag than the feeding mode of adding steel scrap firstly and then briquettes.展开更多
Soil erosion on sloping field has led to a lot of environmental prob lems. In order to reveal the seriousness of the damage of soil erosion on slopin g fields 137Cs tracer method was used to estimate soil erosion rate...Soil erosion on sloping field has led to a lot of environmental prob lems. In order to reveal the seriousness of the damage of soil erosion on slopin g fields 137Cs tracer method was used to estimate soil erosion rate. 137Cs refer ence inventory of 2200Bq/m2 in Yixing, southern Jiangsu Province, was estimated and a model for estimating erosion of cultivated soil was established in order t o avoid overestimating soil erosion rates. Then based on the soil erosion rates and measured soil physical and chemical properties, direct and indirect impacts of soil erosion on environment were further discussed. Direct impacts of erosion on environment included on-site and off-site impacts. The on-site impacts we re that soil layer became thin, soil structure was deteriorated and soil nutrien ts decreased. The off-site impacts were that water bodies were polluted. The in direct impacts of soil erosion on environment were the increase of fertilizer ap plication and energy consumption, and change of adaptability of land uses. Altho ugh erosion intensity was not serious in the study area, its environmental impac ts should not be ignored because of great soil nutrient loss and coarseness of s oil particles.展开更多
This study explores the role of a traditional tillage method,i.e.,compensatory hoeing,for sustainable agro-ecosystem management in the hilly areas of the Chongqing municipality,south-western China.To validate the effe...This study explores the role of a traditional tillage method,i.e.,compensatory hoeing,for sustainable agro-ecosystem management in the hilly areas of the Chongqing municipality,south-western China.To validate the effects of compensatory tillage on the terraced slopes,the tillage method of noncompensatory hoeing was conducted on a linear slope.To acquire information about 137 Cs inventories and soil texture,soil samples were collected by a core sampler with a 6.8-cm diameter at 5.0-m intervals along the toposequence and the linear slope in the dry season(March) of 2007.Meanwhile,a tillage erosion model was used for evaluating the spatial pattern of tillage erosion.The 137 Cs data showed that on the terraced slope,soil was lost from the upper slope,and soil deposition occurred at the toe slope positions on each terrace.As a result,abrupt changes in the 137 Cs inventories of soil were found over short distances between two sides of terrace boundaries.Results obtained from the tillage erosion model and the 137 Cs data indicate that soil redistribution mainly results from tillage erosion in the terraced landscape.Consecutive non-compensatory tillage caused soil redistribution on the linear slope,resulting in thin soil profile disappearing at the top and soil accumulating at the bottom positions of the linear slope.This result further validates that compensatory tillage could avoid the complete erosion of the thin soil layer at the summit position.Therefore,this traditional tillage.method,i.e.,compensatory tillage,has maintained the soil quality at the summit of the slope in the past decades.展开更多
The sleeve sealing ball seat is one of the important components in the multistage fracturing process of horizontal wells.The erosion and wear of the surface will decrease the sealing performance of the fracturing ball...The sleeve sealing ball seat is one of the important components in the multistage fracturing process of horizontal wells.The erosion and wear of the surface will decrease the sealing performance of the fracturing ball and the ball seat.This leads to pressure leakage during the fracturing process and fracturing failure.In this paper,combined with the actual ball seat materials and working conditions during the fracturing process,the erosion tests of ductile iron and tungsten carbide materials under different erosion speeds,angles,and mortar concentrations are carried out.Then the erosion test results were analyzed by mathematical fitting,and a set of erosion models suitable for sliding sleeve setting ball seat materials were innovatively established.For the first time,this paper combines the erosion model obtained from the experiment and the computational fluid dynamics(CFD)with Fluent software to simulate the erosion of the ball seat.Based on the simulation results,the morphology of the sliding sleeve seat ball after erosion is predicted.Through analysis of the test and simulation results,it is showed that the erosion rate of tungsten carbide material is lower and the wear resistance is better under the condition of small angle erosion.This research can offer a strong basis for fracturing site selection,surface treatment methods,and prediction of failure time of ball seats.展开更多
Contour ridge systems may lead to seepage that could result in serious soil erosion. Modeling soil erosion under seepage conditions in a contour ridge system has been overlooked in most current soil erosion models. To...Contour ridge systems may lead to seepage that could result in serious soil erosion. Modeling soil erosion under seepage conditions in a contour ridge system has been overlooked in most current soil erosion models. To address the importance of seepage in soil erosion modeling, a total of 23 treatments with 3 factors, row grade, field slope and ridge height, in 5 gradients were arranged in an orthogonal rotatable central composite design. The second-order polynomial regression model for predicting the sediment yield was improved by using the measured or predicted seepage discharge as an input factor, which increased the coefficient of determination(R^2) from 0.743 to 0.915 or 0.893. The improved regression models combined with the measured seepage discharge had a lower P(0.007) compared to those combined with the predicted seepage discharge(P=0.016). With the measured seepage discharge incorporated, some significant(P<0.050) effects and interactions of influential factors on sediment yield were detected, including the row grade and its interactions with the field slope, ridge height and seepage discharge, the quadratic terms of the field slope and its interactions with the row grade and seepage discharge. In the regression model with the predicted seepage discharge as an influencing factor, only the interaction between row grade and seepage discharge significantly affected the sediment yield. The regression model incorporated with predicted seepage discharge may be expressed simply and can be used effectively when measured seepage discharge data are not available.展开更多
Studies of wind erosion based on Geographic Information System（GIS） and Remote Sensing（RS） have not attracted sufficient attention because they are limited by natural and scientific factors.Few studies have been c...Studies of wind erosion based on Geographic Information System（GIS） and Remote Sensing（RS） have not attracted sufficient attention because they are limited by natural and scientific factors.Few studies have been conducted to estimate the intensity of large-scale wind erosion in Inner Mongolia,China.In the present study,a new model based on five factors including the number of snow cover days,soil erodibility,aridity,vegetation index and wind field intensity was developed to quantitatively estimate the amount of wind erosion.The results showed that wind erosion widely existed in Inner Mongolia.It covers an area of approximately 90×104 km2,accounting for 80% of the study region.During 1985–2011,wind erosion has aggravated over the entire region of Inner Mongolia,which was indicated by enlarged zones of erosion at severe,intensive and mild levels.In Inner Mongolia,a distinct spatial differentiation of wind erosion intensity was noted.The distribution of change intensity exhibited a downward trend that decreased from severe increase in the southwest to mild decrease in the northeast of the region.Zones occupied by barren land or sparse vegetation showed the most severe erosion,followed by land occupied by open shrubbery.Grasslands would have the most dramatic potential for changes in the future because these areas showed the largest fluctuation range of change intensity.In addition,a significantly negative relation was noted between change intensity and land slope.The relation between soil type and change intensity differed with the content of Ca CO3 and the surface composition of sandy,loamy and clayey soils with particle sizes of 0–1 cm.The results have certain significance for understanding the mechanism and change process of wind erosion that has occurred during the study period.Therefore,the present study can provide a scientific basis for the prevention and treatment of wind erosion in Inner Mongolia.展开更多
Submarine landslides can cause severe damage to marine engineering structures. Their sliding velocity and runout distance are two major parameters for quantifying and analyzing the risk of submarine landslides.Current...Submarine landslides can cause severe damage to marine engineering structures. Their sliding velocity and runout distance are two major parameters for quantifying and analyzing the risk of submarine landslides.Currently, commercial calculation programs such as BING have limitations in simulating underwater soil movements. All of these processes can be consistently simulated through a smoothed particle hydrodynamics（SPH） depth integrated model. The basis of the model is a control equation that was developed to take into account the effects of soil consolidation and erosion. In this work, the frictional rheological mode has been used to perform a simulation study of submarine landslides. Time-history curves of the sliding body＇s velocity, height,and length under various conditions of water depth, slope gradient, contact friction coefficient, and erosion rate are compared; the maximum sliding distance and velocity are calculated; and patterns of variation are discussed.The findings of this study can provide a reference for disaster warnings and pipeline route selection.展开更多
基金Supported by National Science and Technology Support Program in Twelfth Five-year Plan(2012BAD05B06)Special Funds for Excellent Young Scientific Talents in Guizhou[(2011)14]~~
文摘The aim was to further research soil erosion characteristics and accurately predict soil erosion amount in karst areas. Based on field surveys and research achievements available, yellow soils, which are widely distributed, were chosen as test soil samples and slope, rain intensity, vegetation coverage and bare-rock ratio were taken as soil erosion factors. Artificial rain simulation instruments （needle-type） were made use of to simulate correlation of rain intensity, vegetation coverage, and bare-rock ratio with soil erosion quantity. Furthermore, multiple-factor linear regression analysis, stepwise regression analysis and multiple-factor non-linear regression analy- sis were made to establish a multiple-factor formula of soil erosion modulus with dif- ferent slopes and select regression models with high correlation coefficients. The re- sults show that a non-linear regression model reached extremely significant level or significant level （0.692〈FF〈0.988） and linear regression model achieved significant lev- el （0.523〈FF〈0.634）. The effects of erosion modulus changed from decreasing to in- creasing and the erosion factors from high to low were rain intensity, vegetation cov- erage and bare-rock ratio when slope gradient was at 6~, 16~, 26~ and 36~. The mod- el is of high accuracy for predicting gentle slope and abtupt slope, which reveals correlation of erosion modulus with erosion factors in karst areas.
基金supported by the Federal German Ministry of Education and Research (BMBF) (No. 03 G 0669)coordinated by the German Jülich Research Centre (FZJ)
文摘Due to the impoundment of the Yangtze River, the Three Gorges Dam in China fosters high land-use dynamics. Soil erosion is expected to increase dramatically. One of the key factors in soil erosion control is the vegetation cover and crop type. However, determining these factors adequately for the use in soil erosion modeling is very time-consuming especially for large mountainous areas, such as the Xiangxi （香溪） catchment in the Three Gorges area. In our study, the crop and management factor C was calculated using the fractional vegetation cover （CFvc） based on Landsat-TM images from 2005, 2006, and 2007 and on literature studies （CLIT）. In 2007, the values of CFvc range between 0.001 and 0.98 in the Xiangxi catchment. The mean CFVC value is 0.05. CLIT values are distinctly higher, ranging from 0.08 to 0.46 with a mean value of 0.32 in the Xiangxi catchment. The mean potential soil loss amounts to 120.62 t/ha/a in the Xiangxi catchment when using CLIT for modeling. Based on CFVC, the predicted mean soil loss in the Xiangxi catchment is 11.50 t/ha/a. Therefore, CLIT appears to bemore reliable than the C factor based on the fractional vegetation cover.
文摘Soil erosion models can be understood as a virtual laboratory that brings together data, observations and knowledge from different fields for sustainable environmental management. The present study was carried out on Sebeya catchment which is located in the Western Province of Rwanda. The main objective of this study was to develop a Universal Soil Loss Equation type of erosion model to be used in predicting soil loss and associated crop yields for sustainable agriculture management in Sebeya catchment at the level of parcels. USLE parameters were determined on each parcel in Sebeya catchment using map overlapping techniques as applied in Geographical Information System (GIS). Applying a combination of 0, 1, 2 and 3 soil erosion control measures on each of 259,673 parcels, the simulated annual soil loss for Sebeya catchment was 849.94;143.27;88.64 and 28.59 t/ha/yr respectively. Soil Loss and Crop Yield (SOLCY) model has been developed to predict soil loss and crop yields for each main cultivated crop in Sebeya catchment. A combination of 3 soil erosion control measures such as (bench terrace + mulching + drainage channels) has been found to be the most effective in reducing soil erosion on each parcel with slope range of (16 - 60)%. Farmers and agriculture technicians can use SOLCY model. Finally, researchers should develop similar models on other catchments based on SOLCY model design concept.
基金supported by Korea Ministry of Environment(MOE)as"GAIA Program2014000540005"
文摘Recent advances in computer with geographic information system(GIS) technologies have allowed modelers to develop physics-based models for modeling soil erosion processes in time and space.However, it has been widely recognized that the effect of uncertainties on model predictions may be more significant when modelers apply such models for their own modeling purposes.Sources of uncertainty involved in modeling include data, model structural, and parameter uncertainty.To deal with the uncertain parameters of a catchment-scale soil erosion model(CSEM) and assess simulation uncertainties in soil erosion, particle filtering modeling(PF) is introduced in the CSEM.The proposed method, CSEM-PF, estimates parameters of non-linear and non-Gaussian systems, such as a physics-based soil erosion model by assimilating observation data such as discharge and sediment discharge sequences at outlets.PF provides timevarying feasible parameter sets as well as uncertainty bounds of outputs while traditional automatic calibration techniques result in a time-invariant global optimal parameter set.CSEM-PF was applied to a small mountainous catchment of the Yongdamdam in Korea for soil erosion modeling and uncertainty assessment for three historical typhoon events.Finally, the most optimal parameter sets and uncertainty bounds of simulation of both discharge and sediment discharge at each time step of the study events are provided.
基金Supported by China Postdoctoral Science Foundation(2019T120114,2019M650756)National Natural Science Foundation of China(41801064,71790611)Central Asia Atmosphere Science Research Fund(CAAS201804)
文摘In this study, non-cumulative slope length(NCSL) calculation method and spatial analytical calculation(SAC) method were respectively applied to extract slope length and slope length factor from 10 sample areas, which are located in Ansai County, north Shaanxi Province. The comparison of computation precision between variable DEM resolutions showed that NCSL was superior to SAC entirely. And the results were best when the DEM resolutions were 5 and 10 m. Besides, the results of slope length factor were nearly the same under the two conditions. So DEM of 10 m resolution can be used to extract slope length.
基金jointly supported by the Natural Science Basic Research Program of Shaanxi Province,China(2021JZ-17)Agricultural Key-scientific and Core-technological Project of Shaanxi Province,China(2024NYGG011)the Shaanxi Agricultural Collaborative Innovation and Extension Alliance,China(LMR202204)。
文摘Soil erosion models are effective tools for assessing soil erosion indicators and simulating erosion processes.China has some of the most severe soil erosion in the world.To better apply soil erosion models to address soil erosion issues,it is necessary to understand the development process and current status of soil erosion modeling research in China.In this study,a combination of bibliometric analysis and statistical methods was used to review and organize Chinese soil erosion models(1982-2022)from various perspectives,including keywords,model operations,model classification,model spatiotemporal scales,and model geographical applications.This findings of this analysis indicate that the study of soil erosion models in China mainly focuses on large scales(regional and large river basins)using empirical models including USLE,RUSLE,and CSLE.The research areas are primarily concentrated in southeastern and central China.The research content has gradually shifted from studying soil erosion characteristics to analyzing influencing factors,spatiotemporal evolution of erosion,and erosion process and morphology stages.However,there are several issues in current Chinese soil erosion modeling research.These include a lack of validation of model application results with field measurements,limited application areas for the models,and relatively weak research on erosion process mechanisms.On this basis,it is recommended that future research should increase the observation of soil erosion processes and establish methods for data or mathematical formula conversion based on different geographical environments.Also,there is a need to strengthen research on erosion process mechanisms.The findings of this study should provide a valuable resource for researchers to future understand the development process and current issues of Chinese soil erosion models,providing insights for future research directions.
文摘Beach groynes are structures for erosion protection along sandy coasts near inlets and can reduce the coastal erosion substantially,but open groynes cannot stop erosion completely because sand can be removed from the groyne compartments by cross-shore processes.Beach groynes should be designed with sufficient bypassing of sand to minimise erosion.Regular beach maintenance is required to keep a sufficient beach width for recreational purposes.The effectiveness of groyne compartments can be significantly improved by using T-head groynes or by using a submerged sill or breakwater in between the groynes.An economic evaluation shows that the beach maintenance costs over 50 years may be substantially higher than the construction costs of a submerged breakwater.An important parameter to be studied is the longshore transport,which requires detailed information of the wave climate,preferably based on measured data(offshore buoys)in combination with deep water wave modelling.Various models have been used to determine the net longshore sand transport and coastline changes.The design of groynes to reduce coastal erosion is illustrated by three field cases(Atlantic coast near Soulac,France;Lagos coast,Nigeria and Black Sea coast,Romania).These example cases show that beach groynes are effective structures,but sufficient bypassing of longshore sand transport is essential to minimise erosion.Regular beach fills in the groyne compartments may be required at high-energy(exposed)coasts.A submerged or emerged breakwater can be built between the groynes to protect the beach in the groyne compartments against erosion by cross-shore processes.
文摘The revised Morgan,Morgan and Finney(rMMF)water erosion model calculates annual surface runoff and soil loss from field-sized areas.The original version of the rMMF is neither suited to calculate water erosion along irregular hillslopes,nor capable to allow infiltration of once generated surface runoff at places where the runoff speed slows down,and infiltration could occur under natural conditions.The aim of this article is to describe a new hillslope version of the rMMF model that allows infiltration of surface runoff,and to show examples of soil erosion modelling along real and hypothetical hillslopes.The new hillslope version(hMMF)splits the entire hillslope into a number of sections that have individual properties,such as slope angle,slope length,soil properties and vegetation characteristics.The surface runoff along the slope is calculated by summing the volume of surface runoff generated in a particular section with the surface runoff coming from the immediate upsiope section.The related sediment transport is calculated for each section using the calculated detachment for the section,the sediment coming from the upsiope section and the transport capacity.A new variable is introduced to account for infiltration of surface runoff and allows simulating the effects of soil and water conservation structures on water erosion.The model was tested using measured data from plots in Africa,Asia,the US and Europe,as well as for a surveyed hillslope in Tunisia(Barbara watershed).Overall,the performance of the hMMF was reasonable for surface runoff and poor for soil loss when recommended input variable values are used.Calibration of the model resulted in a good performance,which shows the capability of the hMMF model to reproduce measured surface runoff and erosion amounts.In addition,realistic water erosion patterns on hillslopes with soil and water conservation can be simulated.
基金the Foundation of the National Natural Science Foundation of China(No.51974033)Educational Commission of Hubei Province of China(Q20191310,D20171305).
文摘In oil drilling processes,sand production in the oil layer is a common issue,generally mitigated by means of sand control screens.To prevent or reduce the risk of damage of these screens and to improve the related service life,it is necessary to investigate the related erosion dynamics.In this study,a screen mesh model based on the flow field similarity theory is proposed to overcome the otherwise too complex geometric structure of this type of equipment.Such model is optimized using experimental data.The predicted results are in good agreement with the measured values,and the error is less than 15%.The results also show that the simplified geometric screen model and the optimized Zhang et al.erosion model have high reliability;therefore,they could effective be used to select underground screen meshes and improve the design of production process.
文摘Soil erosion has been identified as one of the most destructive forms of land degradation,posing a threat to the sustainability of global economic,social and environmental systems.This underscores the need for sustainable land management that takes erosion control and prevention into consideration.This requires the use of state-of-the-art erosion prediction models.The models often require extensive input of detailed spatial and temporal data,some of which are not readily available in many developing countries,particularly detailed soil data.The soil dataset Global Gridded Soil Information(SoilGrids)could potentially fill the data gap.Nevertheless,its value and accuracy for soil erosion modelling in the humid tropics is still unknown,necessitating the need to assess its value vis-à-vis field-based data.The major objective of this study was to conduct a comparative assessment of the value of SoilGrids and field-based soil data for estimating soil loss.Soil samples were collected from five physiographic positions(summit,shoulder,back slope,foot slope,and toe slope)using the soil catena approach.Samples were collected using a 5-cm steel sample ring(undisturbed)and a spade(disturbed).Data of the landform,predominant vegetation types,canopy cover,average plant height,land use,soil depth,shear strength,and soil color were recorded for each site.The soil samples were subjected to laboratory analysis for saturated hydraulic conductivity,bulk density,particle size distribution,and organic matter content.Pedotransfer functions were applied on the SoilGrids and field-based data to generate soil hydrological properties.The resultant field-based data were compared with the SoilGrids data for corresponding points/areas to determine the potential similarities of the two datasets.Both datasets were then used as inputs for soil erosion assessment using the revised Morgan-Morgan-Finney model.The results from both datasets were again compared to determine the degree of similarity.The results showed that with respect to point-based comparison,both datasets were significantly different.At the hillslope delineation level,the field-based data still consistently had a greater degree of variability,but the hillslope averages were not significantly different for both datasets.Similar results were recorded with the soil loss parameters generated from both datasets;point-based comparison showed that both datasets were significantly different,whereas the reverse was true for parcel/area-based comparison.SoilGrids data are certainly useful,especially where soil data are lacking;the utility of this dataset is,however,dependent on the scale of operation or the extent of detail required.When detailed,site-specific data are required,SoilGrids may not be a good alternative to soil survey data in the humid tropics.On the other hand,if the average soil properties of a region,area,or land parcel are required for the implementation of a particular project,plan,or program,SoilGrids data can be a very valuable alternative to soil survey data.
文摘Wind erosion represents a formidable environmental challenge and has serious negative impacts on soil health and agricultural productivity, particularly in arid and semi-arid areas. The complex dynamics of wind erosion make its large-scale monitoring and quantification a daunting task. To facilitate the monitoring and quantification of wind erosion, various scientific approaches and methods have been employed. These include sophisticated wind erosion equations and models, wind tunnel experiments, and the application of radionuclides. Additionally, researchers have assessed soil physicochemical properties, used anemometers for wind speed measurement, and deployed dust collectors for particle capture. Remote sensing technologies, wind erosion monitoring stations, and evaluations of wind barriers have also been utilized. Recently, the adoption of machine learning methods has gained popularity. Despite their value, each of these techniques has limitations in capturing the full spectrum of the wind erosion process. This paper examines these limitations and assesses the effectiveness of each method in the context of wind erosion studies. It also outlines directions for future research and suggests pathways that could enhance the understanding and management of wind erosion.
基金supported by the Zhejiang Province Key Research and Development Plan(2021C03152)Zhoushan Science and Technology Project(2021C21011)+1 种基金Industrial Project of Public Technology Research of Zhejiang Province Science and Technology Department(LGG18E040001)Scientific Research Project of Zhejiang Province Education Department(Y20173854)
文摘Erosion is one of the most concerning issues in pipeline flow assurance for the Oil&Gas pipeline industries,which can easily lead to wall thinning,perforation leakage,and other crucial safety risks to the steady operation of pipelines.In this research,a novel experimental device is designed to investigate the erosion characteristics of 304 stainless and L245 carbon steel in the gas-solid two-phase flow.Regarding the impacts on erosion rate,the typical factors such as gas velocity,impact angle,erosion time,particle material and target material are individually observed and comprehensive analyzed with the assistance of apparent morphology characterized via Scanning Electron Microscope.Experimental results show that the severest erosion occurs when the angle reaches approximate 30°whether eroded by type I or type II particles,which is observed in both two types of steel.Concretely,304 stainless steel and L245 carbon steel appear to be cut at low angles,and impacted at high angles to form erosion pits.In the steady operational state,the erosion rate is insensitive to the short erosion time and free from the influences caused by the“erosion latent period”.Based on the comparison between experimental data and numerical results generated by existing erosion models,a modified model with low tolerance(<3%),high feasibility and strong consistency is proposed to make an accurate prediction of the erosion in terms of two types of steel under various industrial conditions.
基金This research was supported by the National Natural Science Foundation of China （Grant No. 51304053）, Jiangxi University of Science and Technology Doctoral Start-up Fund （No. 3401223181）.
文摘The leaching of chromium from stainless steel dust （SSD） is deleterious to the environment. To address this issue, the reduction of SSD briquettes can be employed to effectively extract chromium. The recovery rates of iron, chromium, and nickel via ironbath reduction of SSD briquettes were determined using X-ray fluorescence spectroscopy, X-ray diffraction, and scanning electron microscopy measurements. First, the effects of basicity and contents of silicon, iron, CaF2, and carbon on the recovery rates of the three metals were analyzed using the slag amount prediction model, which was originally established from the A1203 balance of corundum crucible erosion behavior. Second, the effect of feeding mode, i.e., whether steel scrap and SSD briquettes were simultaneously added, on the recovery rates was discussed in detail. Third, the iron-bath reduction of SSD briquettes was thermodynamically analyzed. The results indicated that the recovery rates of the three metals are greater than 95% those of using a basicity of 1.5 and 6.0% CaF2, 15% carbon, and 7% ferrosilicon. The recovery rate of chromium increases twofold with the addition of ferrosilicon. The feeding mode of adding briquettes and steel scrap simultaneously is better for recovery of metals and separation of the metal and slag than the feeding mode of adding steel scrap firstly and then briquettes.
文摘Soil erosion on sloping field has led to a lot of environmental prob lems. In order to reveal the seriousness of the damage of soil erosion on slopin g fields 137Cs tracer method was used to estimate soil erosion rate. 137Cs refer ence inventory of 2200Bq/m2 in Yixing, southern Jiangsu Province, was estimated and a model for estimating erosion of cultivated soil was established in order t o avoid overestimating soil erosion rates. Then based on the soil erosion rates and measured soil physical and chemical properties, direct and indirect impacts of soil erosion on environment were further discussed. Direct impacts of erosion on environment included on-site and off-site impacts. The on-site impacts we re that soil layer became thin, soil structure was deteriorated and soil nutrien ts decreased. The off-site impacts were that water bodies were polluted. The in direct impacts of soil erosion on environment were the increase of fertilizer ap plication and energy consumption, and change of adaptability of land uses. Altho ugh erosion intensity was not serious in the study area, its environmental impac ts should not be ignored because of great soil nutrient loss and coarseness of s oil particles.
基金provided by the Special Support Foundation of the Institute of Mountain Hazards and Environment (IMHE)the 100 Talents Programme of IMHE,Chinese Academy of Sciences (No. SDSQB-2011-01)
文摘This study explores the role of a traditional tillage method,i.e.,compensatory hoeing,for sustainable agro-ecosystem management in the hilly areas of the Chongqing municipality,south-western China.To validate the effects of compensatory tillage on the terraced slopes,the tillage method of noncompensatory hoeing was conducted on a linear slope.To acquire information about 137 Cs inventories and soil texture,soil samples were collected by a core sampler with a 6.8-cm diameter at 5.0-m intervals along the toposequence and the linear slope in the dry season(March) of 2007.Meanwhile,a tillage erosion model was used for evaluating the spatial pattern of tillage erosion.The 137 Cs data showed that on the terraced slope,soil was lost from the upper slope,and soil deposition occurred at the toe slope positions on each terrace.As a result,abrupt changes in the 137 Cs inventories of soil were found over short distances between two sides of terrace boundaries.Results obtained from the tillage erosion model and the 137 Cs data indicate that soil redistribution mainly results from tillage erosion in the terraced landscape.Consecutive non-compensatory tillage caused soil redistribution on the linear slope,resulting in thin soil profile disappearing at the top and soil accumulating at the bottom positions of the linear slope.This result further validates that compensatory tillage could avoid the complete erosion of the thin soil layer at the summit position.Therefore,this traditional tillage.method,i.e.,compensatory tillage,has maintained the soil quality at the summit of the slope in the past decades.
基金This research was funded by the National Natural Science Foundation of China(grant number 51675534).
文摘The sleeve sealing ball seat is one of the important components in the multistage fracturing process of horizontal wells.The erosion and wear of the surface will decrease the sealing performance of the fracturing ball and the ball seat.This leads to pressure leakage during the fracturing process and fracturing failure.In this paper,combined with the actual ball seat materials and working conditions during the fracturing process,the erosion tests of ductile iron and tungsten carbide materials under different erosion speeds,angles,and mortar concentrations are carried out.Then the erosion test results were analyzed by mathematical fitting,and a set of erosion models suitable for sliding sleeve setting ball seat materials were innovatively established.For the first time,this paper combines the erosion model obtained from the experiment and the computational fluid dynamics(CFD)with Fluent software to simulate the erosion of the ball seat.Based on the simulation results,the morphology of the sliding sleeve seat ball after erosion is predicted.Through analysis of the test and simulation results,it is showed that the erosion rate of tungsten carbide material is lower and the wear resistance is better under the condition of small angle erosion.This research can offer a strong basis for fracturing site selection,surface treatment methods,and prediction of failure time of ball seats.
基金funded by the National Natural Science Foundation of China (41701311)the Natural Science Foundation of Shandong Province (ZR2017JL019)+1 种基金the Project of Introducing and Cultivating Young Talent in the Universities of Shandong Province (LUJIAORENZI20199)the Shandong Key Research and Development Program (2018GSF117001)。
文摘Contour ridge systems may lead to seepage that could result in serious soil erosion. Modeling soil erosion under seepage conditions in a contour ridge system has been overlooked in most current soil erosion models. To address the importance of seepage in soil erosion modeling, a total of 23 treatments with 3 factors, row grade, field slope and ridge height, in 5 gradients were arranged in an orthogonal rotatable central composite design. The second-order polynomial regression model for predicting the sediment yield was improved by using the measured or predicted seepage discharge as an input factor, which increased the coefficient of determination(R^2) from 0.743 to 0.915 or 0.893. The improved regression models combined with the measured seepage discharge had a lower P(0.007) compared to those combined with the predicted seepage discharge(P=0.016). With the measured seepage discharge incorporated, some significant(P<0.050) effects and interactions of influential factors on sediment yield were detected, including the row grade and its interactions with the field slope, ridge height and seepage discharge, the quadratic terms of the field slope and its interactions with the row grade and seepage discharge. In the regression model with the predicted seepage discharge as an influencing factor, only the interaction between row grade and seepage discharge significantly affected the sediment yield. The regression model incorporated with predicted seepage discharge may be expressed simply and can be used effectively when measured seepage discharge data are not available.
基金supported by the National Natural Science Foundation of China (41201441,41371363,41301501)Foundation of Director of Institute of Remote Sensing and Digital Earth,Chinese Academy of Science (Y4SY0200CX)Guangxi Key Laboratory of Spatial Information and Geomatics (1207115-18)
文摘Studies of wind erosion based on Geographic Information System（GIS） and Remote Sensing（RS） have not attracted sufficient attention because they are limited by natural and scientific factors.Few studies have been conducted to estimate the intensity of large-scale wind erosion in Inner Mongolia,China.In the present study,a new model based on five factors including the number of snow cover days,soil erodibility,aridity,vegetation index and wind field intensity was developed to quantitatively estimate the amount of wind erosion.The results showed that wind erosion widely existed in Inner Mongolia.It covers an area of approximately 90×104 km2,accounting for 80% of the study region.During 1985–2011,wind erosion has aggravated over the entire region of Inner Mongolia,which was indicated by enlarged zones of erosion at severe,intensive and mild levels.In Inner Mongolia,a distinct spatial differentiation of wind erosion intensity was noted.The distribution of change intensity exhibited a downward trend that decreased from severe increase in the southwest to mild decrease in the northeast of the region.Zones occupied by barren land or sparse vegetation showed the most severe erosion,followed by land occupied by open shrubbery.Grasslands would have the most dramatic potential for changes in the future because these areas showed the largest fluctuation range of change intensity.In addition,a significantly negative relation was noted between change intensity and land slope.The relation between soil type and change intensity differed with the content of Ca CO3 and the surface composition of sandy,loamy and clayey soils with particle sizes of 0–1 cm.The results have certain significance for understanding the mechanism and change process of wind erosion that has occurred during the study period.Therefore,the present study can provide a scientific basis for the prevention and treatment of wind erosion in Inner Mongolia.
基金The Specialized Research Fund for the Doctoral Program of Higher Education under contract No.20120041130002the National Key Project of Science and Technology under contract No.2011ZX 05056-001-02the Fundamental Research Funds for the Central Universities under contract No.DUT14ZD220
文摘Submarine landslides can cause severe damage to marine engineering structures. Their sliding velocity and runout distance are two major parameters for quantifying and analyzing the risk of submarine landslides.Currently, commercial calculation programs such as BING have limitations in simulating underwater soil movements. All of these processes can be consistently simulated through a smoothed particle hydrodynamics（SPH） depth integrated model. The basis of the model is a control equation that was developed to take into account the effects of soil consolidation and erosion. In this work, the frictional rheological mode has been used to perform a simulation study of submarine landslides. Time-history curves of the sliding body＇s velocity, height,and length under various conditions of water depth, slope gradient, contact friction coefficient, and erosion rate are compared; the maximum sliding distance and velocity are calculated; and patterns of variation are discussed.The findings of this study can provide a reference for disaster warnings and pipeline route selection.
