Spiral bevel gears are critical transmission components,and are widely used in the aerospace field.This paper proposes a new multi-DOF envelope forming process for fabricating spiral bevel gears.Firstly,the multi-DOF ...Spiral bevel gears are critical transmission components,and are widely used in the aerospace field.This paper proposes a new multi-DOF envelope forming process for fabricating spiral bevel gears.Firstly,the multi-DOF envelope forming principle of spiral bevel gears is proposed.Secondly,the design methods for the envelope tool geometry and movement are proposed based on the envelope geometry and movement relationships.Thirdly,the metal flow and tooth filling laws are revealed through 3D FE simulation of the multi-DOF envelope forming process of a typical spiral bevel gear.Fourthly,a new method for separating the envelope tool and the formed spiral bevel gear with back taper tooth is proposed to avoid their interference.Finally,experiments on multi-DOF envelope forming of this typical spiral bevel gear are conducted using new heavy load multi-DOF envelope forming equipment.The simulation and experimental results show the feasibility of the proposed multi-DOF envelope forming process for fabricating spiral bevel gears with back taper tooth and the corresponding process design methods.展开更多
UAV shipboard landing poses significant challenges in terms of safety and efficiency,due to the oscillatory ship motion caused by wave interactions and wind gusts,especially in rough sea states.To solve this issue,a f...UAV shipboard landing poses significant challenges in terms of safety and efficiency,due to the oscillatory ship motion caused by wave interactions and wind gusts,especially in rough sea states.To solve this issue,a flight envelope constrained fixed-time control strategy is proposed to achieve a reliable UAV landing on a maneuvering ship.Firstly,a sliding data window autoregressive model is designed to predict the ship's roll and pitch motions,which are accordingly utilized to identify an appropriate quiescent period for safe landing.Subsequently,a barrier-function-based nonsingular terminal sliding mode controller is developed to eliminate the tracking errors within the identified quiescent period,while ensuring the errors remain bounded to satisfy flight envelope constraints.In particular,lumped disturbance components are estimated by integrating a fixed-time disturbance observer and compensated in the controller.The key advantage of the proposed approach is that it well balances the control requirements between precise landing position and safe landing attitude,guaranteeing both steady-state performance and transient behavior of the tracking error.Finally,comparative Gazebo simulations in different sea state scenarios are conducted to verify the satisfactory control performance.展开更多
To improve braking performance and achieve lightweight in transport equipment,it is necessary to implement overall plastic forming manufacturing of the brake pad baseboard(BPB),which is the core safety component of th...To improve braking performance and achieve lightweight in transport equipment,it is necessary to implement overall plastic forming manufacturing of the brake pad baseboard(BPB),which is the core safety component of the brake system.This study presents an innovative multi-DOF envelope forming(MDFEF)process to realize the plastic forming of BPB with thin skin and high reinforcing ribs.The MDFEF principle for BPB,and the design methods for the envelope mold are first presented.Through FE simulations,the behavior of metal flow,uneven growth pattern of reinforcing ribs,evolution of equivalent strain and evolution of forming force in MDFEF of BPB are investigated.To realize MDFEF,an innovative MDFEF equipment driven by parallel linkages is exploited.The force states of linkages in MDFEF are calculated,and the reasonable mold position is determined to reduce the maximum force on the linkages and improve the service performance of MDFEF equipment.The MDFEF experiments of BPB are conducted and qualified BPB is obtained,which demonstrates that the presented MDFEF process and equipment are applicable to manufacture BPB with thin skin and high reinforcing ribs.展开更多
To achieve the manufacturing of Thin-Wall and High-Rib Components(TWHRC)with high precision,a novel heavy load Multi-DOF Envelope Forming Press(MEFP)with Parallel Kinematic Mechanism(PKM),driven by six Permanent Magne...To achieve the manufacturing of Thin-Wall and High-Rib Components(TWHRC)with high precision,a novel heavy load Multi-DOF Envelope Forming Press(MEFP)with Parallel Kinematic Mechanism(PKM),driven by six Permanent Magnet Synchronous Motors(PMSMs),is developed.However,on account of the heavy forming load,the PMSM parameters are in great variation.Meanwhile,the PMSM is always in a transient state caused by fast time-varying forming load,resulting in low identification precision of varied PMSM parameters and control precision of PMSM under traditional parameter identification methods.To solve this problem,a novel Sliding Mode Control Method with Enhanced PMSM Parameter Identification(SMCMEPPI)for heavy load MEFP is proposed.Firstly,the kinematic model of MEFP is established.Secondly,the variation law of PMSM parameters under heavy load is revealed.Thirdly,an enhanced PMSM parameter identification method is proposed,in which the q axis current of PMSM is used to represent the changing rate of forming load and the adjustment factor is first proposed to remove improper input of PMSM parameter identification online.Fourthly,the Electromechanical Coupling Dynamic Model(ECDM)of MEFP,which includes identified PMSM parameters,is developed.Finally,based on the developed ECDM,a novel SMCMEPPI is proposed to realize the high-precision control of heavy load MEFP.The experimental results indicate that the proposed SMCMEPPI can significantly improve the control precision of heavy load MEFP.展开更多
The stratospheric airship is affected by harsh conditions in the stratosphere environment.To ensure the safety of the airship,it is necessary to detect the material state of the airship envelope.Since digital image co...The stratospheric airship is affected by harsh conditions in the stratosphere environment.To ensure the safety of the airship,it is necessary to detect the material state of the airship envelope.Since digital image correlation possesses non-contact strain measurement ability,this paper explores the infuence of different shapes of the subset on measurement accuracy.Through the results,it is found that increasing the aspect ratio of subsets can improve the strain accuracy measured in the c-direction,and reducing the aspect ratio can improve the strain accuracy measured in the y-direction.This trend becomes more obvious as the strain increases.Based on this discovery,a subset adaptive algorithm is proposed.The feasibility of the algorithm is verified by experiments,and the precision of strain measurement can be effectively improved by adjusting the threshold value.Therefore,the algorithm can be utilized to increase the measurement accuracy in the larger strain direction without changing the size of the subset.展开更多
The circumstellar envelopes(CSE) of asymptotic giant branch(AGB) stars are abundant in molecular emissions, offering valuable insights into the physical and chemical conditions of these evolving stars. In this paper, ...The circumstellar envelopes(CSE) of asymptotic giant branch(AGB) stars are abundant in molecular emissions, offering valuable insights into the physical and chemical conditions of these evolving stars. In this paper, we report observations of two molecules(CO and SO_(2)) toward four O-rich AGB stars using the James Clerk Maxwell Telescope(JCMT). We detected an unusual SO_(2) spectral feature comprising both broad and narrow components in IK Tau and AP Lyn. The broad line profiles may originate from thermal molecular emission, while the narrow profiles could come from other species(or masers) or astrophysical phenomena occurring within the CSEs of the AGB stars, such as episodic mass loss, bipolar outflows, or emissions associated with the complex physical processes near the central star. The narrow lines of SO_(2) may also arise from vibrationally excited emissions. Additionally, we observed the same U-line in both TX Cam and IK Tau, which may originate from the molecule N^(17)O. We analyzed the identified molecular lines using rotational diagrams to determine their excitation temperatures, column densities, and fractional abundances. This information aids in the constructing of reliable astrochemical models for a more detailed examination of the target stars. The narrow component of the SO_(2) line suggests unusual astrophysical phenomena, making IK Tau and AP Lyn particularly intriguing for further investigation to fully understand the physical processes at play in these sources.展开更多
Fine structure and elemental composition of envelopes of 10 taxa of Trachelomonas and Strombomonas from natural freshwater bodies in China were studied and phylogeny of both genera were discussed. The results indicate...Fine structure and elemental composition of envelopes of 10 taxa of Trachelomonas and Strombomonas from natural freshwater bodies in China were studied and phylogeny of both genera were discussed. The results indicate that iron (Fe) and silicon (Si) are the primary mineral elements of the envelopes. Composition of mineral elements was uncorrelated with envelope color, however, it was highly correlated with the microarchitecture of the envelopes. Content of Si was higher than that of Fe in all species of Strombomonas and some species of Trachelomonas with rough surface. In most species of Trachelomonas, especially those with dense and smoothy surface, content of Fe was higher than that of Si. Based on the above results, we propose to assign those species of Strombomonas into Trachelomonas and consider them as a group of the latter. These species were the most primitive among the group with envelopes in Euglenaceae.展开更多
The absence of low-frequency information in seismic data is one of the most difficult problems in elastic full waveform inversion. Without low-frequency data, it is difficult to recover the long-wavelength components ...The absence of low-frequency information in seismic data is one of the most difficult problems in elastic full waveform inversion. Without low-frequency data, it is difficult to recover the long-wavelength components of subsurface models and the inversion converges to local minima. To solve this problem, the elastic envelope inversion method is introduced. Based on the elastic envelope operator that is capable of retrieving low- frequency signals hidden in multicomponent data, the proposed method uses the envelope of multicomponent seismic signals to construct a misfit function and then recover the long- wavelength components of the subsurface model. Numerical tests verify that the elastic envelope method reduces the inversion nonlinearity and provides better starting models for the subsequent conventional elastic full waveform inversion and elastic depth migration, even when low frequencies are missing in multicomponent data and the starting model is far from the true model. Numerical tests also suggest that the proposed method is more effective in reconstructing the long-wavelength components of the S-wave velocity model. The inversion of synthetic data based on the Marmousi-2 model shows that the resolution of conventional elastic full waveform inversion improves after using the starting model obtained using the elastic envelope method. Finally, the limitations of the elastic envelope inversion method are discussed.展开更多
As in homology, the notion of injectivity is introduced in the category whose objects are Hilbert C * module over a C * algebra and whose morphism are bounded module operators. The definition of injective envelope...As in homology, the notion of injectivity is introduced in the category whose objects are Hilbert C * module over a C * algebra and whose morphism are bounded module operators. The definition of injective envelopes of an extension of a Hilbert C * modules over a C * algebra is introduced, and is characterized in terms of the injectivity and essence. It is shown that every Hilbert C * module has a unique (up to H isometrics) injective envelope if it exists. It is also shown that an extension of a Hilbert C * module is an injective envelope if and only if it is an injective and essential extension. Moreover, every Hilbert C * module over a W * algebra has a unique (up to H isometrics) injective envelope and the injective envelope of a Hilbert C * module H is maximal essential extension of H .展开更多
Iron loss and copper loss are the significant parts of electrical loss of machines,which are the major parts particularly under high frequency condition.High-speed permanent magnet synchronous machines(HS-PMSM)have th...Iron loss and copper loss are the significant parts of electrical loss of machines,which are the major parts particularly under high frequency condition.High-speed permanent magnet synchronous machines(HS-PMSM)have the benefits of high power density,high efficiency and wide speed range.Which causes the calculation for iron loss and copper loss in whole operating range complex.By analyzing the components and influencing factors of iron loss and copper loss in stator,we have deduced the calculation formula of iron loss and copper loss in whole operating range based on the analytical solution and finite element approach(EFA)solution.According to the calculation solution,taking the influence of operating temperature on the iron loss and copper loss into account,we propose a temperature correction factor and establish the calculation method for the iron loss and copper loss with temperature influences.Finally,by the conductor transposition,we restrain the circulating current under high-frequency operating condition.展开更多
Curtain wall systems have evolved from aesthetic facade elements into multifunctional building envelopes that actively contribute to energy efficiency and climate responsiveness.This reviewpresents a comprehensive exa...Curtain wall systems have evolved from aesthetic facade elements into multifunctional building envelopes that actively contribute to energy efficiency and climate responsiveness.This reviewpresents a comprehensive examination of curtain walls from an energy-engineering perspective,highlighting their structural typologies(Stick and Unitized),material configurations,and integration with smart technologies such as electrochromic glazing,parametric design algorithms,and Building Management Systems(BMS).Thestudy explores the thermal,acoustic,and solar performance of curtain walls across various climatic zones,supported by comparative analyses and iconic case studies including Apple Park,Burj Khalifa,and Milad Tower.Key challenges—including installation complexity,high maintenance costs,and climate sensitivity—are critically assessed alongside proposed solutions.A central innovation of this work lies in framing curtain walls not only as passive architectural elements but as dynamic interfaces that modulate energy flows,reduce HVAC loads,and enhance occupant comfort.The reviewed data indicate that optimized curtain wall configurations—especially those integrating electrochromic glazing and BIPV modules—can achieve annual energy consumption reductions ranging fromapproximately 5%to 27%,depending on climate,control strategy,and facade typology.The findings offer a valuable reference for architects,energy engineers,and decision-makers seeking to integrate high-performance facades into future-ready building designs.展开更多
The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measu...The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.展开更多
The Shipboard Operation Envelope(SOE) is the safe boundary of the helicopter/ship dynamic interface. The night deck on a ship is usually behind the hangar, where the airflow is turbulent due to the influence of the up...The Shipboard Operation Envelope(SOE) is the safe boundary of the helicopter/ship dynamic interface. The night deck on a ship is usually behind the hangar, where the airflow is turbulent due to the influence of the upper structure, wind and ship speed. The turbulent airnow is the major adverse factor for the safety of shipboard operations. In this paper, the night deck abbot is analysed as the superposition of two penyndicular 2-D airflows.N-S equations are used to calculate the velocity field and the range of turbulent airflow using finite element method. The result is correspondent well with test. Incorporating the influence of the airflow and giving some restrictions on the movements of the ship and on the control margin of the helicopter, the operation envelopes are calculated. The operation envelopes include three types for hovering over the deck, taking-off from and landing on ship, and landing with a landing-aid system. These results are helpful to the pilot training and night safety.展开更多
Envelope analysis is an effective method for characterizing impulsive vibrations in wired condition monitoring(CM)systems. This paper depicts the implementation of envelope analysis on a wireless sensor node for obtai...Envelope analysis is an effective method for characterizing impulsive vibrations in wired condition monitoring(CM)systems. This paper depicts the implementation of envelope analysis on a wireless sensor node for obtaining a more convenient and reliable CM system. To maintain CM performances under the constraints of resources available in the cost effective Zigbee based wireless sensor network(WSN), a low cost cortex-M4 F microcontroller is employed as the core processor to implement the envelope analysis algorithm on the sensor node. The on-chip 12 bit analog-to-digital converter(ADC) working at 10 k Hz sampling rate is adopted to acquire vibration signals measured by a wide frequency band piezoelectric accelerometer. The data processing flow inside the processor is optimized to satisfy the large memory usage in implementing fast Fourier transform(FFT) and Hilbert transform(HT). Thus, the envelope spectrum can be computed from a data frame of 2048 points to achieve a frequency resolution acceptable for identifying the characteristic frequencies of different bearing faults. Experimental evaluation results show that the embedded envelope analysis algorithm can successfully diagnose the simulated bearing faults and the data transmission throughput can be reduced by at least 95% per frame compared with that of the raw data, allowing a large number of sensor nodes to be deployed in the network for real time monitoring.展开更多
The cylindrical worm processed by annular grinding wheel envelope in two degree of freedom motion state is a novel worm. This paper explains the shaping principle of such a worm. To improve meshing quality and the p...The cylindrical worm processed by annular grinding wheel envelope in two degree of freedom motion state is a novel worm. This paper explains the shaping principle of such a worm. To improve meshing quality and the properties of contact and lubrication, the multi objective optimization has been conducted for the first time to the parameters of such a worm pair by the fuzzy optimal method. The results show that, the shape of the contact line is visibly more sloped than before being optimized, lubrication angle is apparently bigger, and the distribution of contact lines is much improved.展开更多
This paper deals with an improved bonding approach of surface-bonded fiber Bragg grating (FBG) sensors for airship envelope structural health monitoring (SHM) under the strain transfer theory. A theoretical formula is...This paper deals with an improved bonding approach of surface-bonded fiber Bragg grating (FBG) sensors for airship envelope structural health monitoring (SHM) under the strain transfer theory. A theoretical formula is derived from the proposed model to predict the strain transfer relationship between the airship envelope and fiber core. Then theoretical predictions are validated by numerical analysis using the finite element method (FEM). Finally, on the basis of the theoretical approach and numerical validation, parameters that influence the strain transfer rate from the airship envelope to fiber core and the ratio of effective sensing length are analyzed, and some meaningful conclusions are provided.展开更多
An active pipe-embedded building envelope, which is an external wall or roof with pipes embedded inside, was presented. This structure may utilize the circulating water in the pipe to transfer heat or coolth inside di...An active pipe-embedded building envelope, which is an external wall or roof with pipes embedded inside, was presented. This structure may utilize the circulating water in the pipe to transfer heat or coolth inside directly. This kind of structure is named ＂active pipe-embedded building envelope＂ due to dealing with the thermal energy actively inside the structure mass by circulating water. This structure not only deals with thermal energy before the external disturbance becomes cooling/heating load by using the circulating water, but also may use low-grade energy sources such as evaporative cooling, solar energy, and geothermal energy. In the meantime, this structure can also improve the indoor thermal comfort by tempering the internal wall surface temperature variation due to the thermal removal in the mass. This work further presents the thermal performance of this structure under a typical hot summer weather condition by comparing it with that of the conventional external wall/roof with numerical simulation. The results show that this pipe-embedded structure may reduce the external heat transfer significantly and reduce the internal wall surface temperature for improving thermal comfort. This work also presents the effects of the water temperature and the pipe spacing on the heat transfer of this structure. The internal surface heat transfer may reduce by about 2.6 W/mE when the water temperature reduces by 1℃ as far as a brick wall with pipes embedded inside is concerned. When the pipe spacing reduces by 50 mm, the internal wall surface heat flux can also reduce by about 2.3 W/m2.展开更多
By use of the two-layer adiabatic globe spectral model and the zonally averaged climatic data of winter season as initial values, 10-day integrations are carried out based on three kinds of model topography (i.e., (1)...By use of the two-layer adiabatic globe spectral model and the zonally averaged climatic data of winter season as initial values, 10-day integrations are carried out based on three kinds of model topography (i.e., (1) the averaged topography; (2) the envelope topography; (3) the modified envelope topography). The results show that the orography of the Northern Hemisphere plays an important role in the simulation of large-scale weather patterns in winter season. The simulation based on the envelope topography developed by Wallace et al. has some improvements in the Rocky Mountains area. But this scheme causes very serious horizontal expansion around the Tibetan Plateau (hereafter referred to as the TV). A modified envelope topography scheme has been worked out that increases the slope of the TP by decreasing the horizontal expansion while keeping the maximum altitude. The results show some improvements of the scheme around the TP. By analysis of the mechanical effects of the large-scale orography on the currents, the different forcings of the air flow over and around the TP and the Rocky Mountain (the RM) are investigated.展开更多
The vibration signal contains a wealth of sensitive information which reflects the running status of the equipment.It is one of the most important steps for precise diagnosis to decompose the signal and extracts the e...The vibration signal contains a wealth of sensitive information which reflects the running status of the equipment.It is one of the most important steps for precise diagnosis to decompose the signal and extracts the effective information properly.The traditional classical adaptive signal decomposition method,such as EMD,exists the problems of mode mixing,low decomposition accuracy etc.Aiming at those problems,EAED(extreme average envelope decomposition)method is presented based on EMD.EAED method has three advantages.Firstly,it is completed through midpoint envelopment method rather than using maximum and minimum envelopment respectively as used in EMD.Therefore,the average variability of the signal can be described accurately.Secondly,in order to reduce the envelope errors during the signal decomposition,replacing two envelopes with one envelope strategy is presented.Thirdly,the similar triangle principle is utilized to calculate the time of extreme average points accurately.Thus,the influence of sampling frequency on the calculation results can be significantly reduced.Experimental results show that EAED could separate out single frequency components from a complex signal gradually.EAED could not only isolate three kinds of typical bearing fault characteristic of vibration frequency components but also has fewer decomposition layers.EAED replaces quadratic enveloping to an envelope which ensuring to isolate the fault characteristic frequency under the condition of less decomposition layers.Therefore,the precision of signal decomposition is improved.展开更多
Pepper mild mottle virus(PMMoV)is a devastating viral pathogen of pepper(Capsicum annuum)but it is unclear whether and how peppers protect against PMMoV infection.The expression of the chloroplast outer membrane prote...Pepper mild mottle virus(PMMoV)is a devastating viral pathogen of pepper(Capsicum annuum)but it is unclear whether and how peppers protect against PMMoV infection.The expression of the chloroplast outer membrane protein 24(OMP24)of C.annuum was upregulated under PMMoV infection and it interacted with PMMoV coat protein(CP).Silencing of OMP24 in either C.annuum or Nicotiana benthamiana facilitated PMMoV infection,whereas overexpression of N.benthamiana OMP24 in transgenic plants inhibited PMMoV infection.Both C.annuum OMP24(CaOMP24)and N.benthamiana OMP24(NbOMP24)localized to the chloroplast and have a moderately hydrophobic transmembrane domain that is necessary for their localization.Overexpression of CaOMP24 induced stromules,perinuclear chloroplast clustering,and accumulation of reactive oxygen species(ROS),the typical defense responses of chloroplasts transferring the retrograde signaling to the nucleus to regulate resistance genes.The expression of PR1 and PR2 was also upregulated significantly in plants overexpressing OMP24.Self-interaction of OMP24 was demonstrated and was required for OMP24-mediated plant defense.Interaction with PMMoV CP interfered with the self-interaction of OMP24 and impaired OMP24-induced stromules,perinuclear chloroplast clustering and ROS accumulation.The results demonstrate the defense function of OMP24 in pepper during viral infection and suggest a possible mechanism by which PMMoV CP modulates the plant defense to facilitate viral infection.展开更多
基金the National Science and Technology Major Project of China(No.2019-VII0017e0158)the National Natural Science Foundation of China(No.U21A20131)+1 种基金the Industry-University Research Cooperation Project,China(No.HFZL2020CXY025)the National Key Laboratory of Science and Technology on Helicopter Transmission,China(No.HTL-O-21G05).
文摘Spiral bevel gears are critical transmission components,and are widely used in the aerospace field.This paper proposes a new multi-DOF envelope forming process for fabricating spiral bevel gears.Firstly,the multi-DOF envelope forming principle of spiral bevel gears is proposed.Secondly,the design methods for the envelope tool geometry and movement are proposed based on the envelope geometry and movement relationships.Thirdly,the metal flow and tooth filling laws are revealed through 3D FE simulation of the multi-DOF envelope forming process of a typical spiral bevel gear.Fourthly,a new method for separating the envelope tool and the formed spiral bevel gear with back taper tooth is proposed to avoid their interference.Finally,experiments on multi-DOF envelope forming of this typical spiral bevel gear are conducted using new heavy load multi-DOF envelope forming equipment.The simulation and experimental results show the feasibility of the proposed multi-DOF envelope forming process for fabricating spiral bevel gears with back taper tooth and the corresponding process design methods.
文摘UAV shipboard landing poses significant challenges in terms of safety and efficiency,due to the oscillatory ship motion caused by wave interactions and wind gusts,especially in rough sea states.To solve this issue,a flight envelope constrained fixed-time control strategy is proposed to achieve a reliable UAV landing on a maneuvering ship.Firstly,a sliding data window autoregressive model is designed to predict the ship's roll and pitch motions,which are accordingly utilized to identify an appropriate quiescent period for safe landing.Subsequently,a barrier-function-based nonsingular terminal sliding mode controller is developed to eliminate the tracking errors within the identified quiescent period,while ensuring the errors remain bounded to satisfy flight envelope constraints.In particular,lumped disturbance components are estimated by integrating a fixed-time disturbance observer and compensated in the controller.The key advantage of the proposed approach is that it well balances the control requirements between precise landing position and safe landing attitude,guaranteeing both steady-state performance and transient behavior of the tracking error.Finally,comparative Gazebo simulations in different sea state scenarios are conducted to verify the satisfactory control performance.
基金Supported by National Natural Science Foundation of China(Grant No.U21A20131)Innovative Research Team Development Program of Ministry of Education of China(Grant No.IRT17R83)111 Project(Grant No.B17034)。
文摘To improve braking performance and achieve lightweight in transport equipment,it is necessary to implement overall plastic forming manufacturing of the brake pad baseboard(BPB),which is the core safety component of the brake system.This study presents an innovative multi-DOF envelope forming(MDFEF)process to realize the plastic forming of BPB with thin skin and high reinforcing ribs.The MDFEF principle for BPB,and the design methods for the envelope mold are first presented.Through FE simulations,the behavior of metal flow,uneven growth pattern of reinforcing ribs,evolution of equivalent strain and evolution of forming force in MDFEF of BPB are investigated.To realize MDFEF,an innovative MDFEF equipment driven by parallel linkages is exploited.The force states of linkages in MDFEF are calculated,and the reasonable mold position is determined to reduce the maximum force on the linkages and improve the service performance of MDFEF equipment.The MDFEF experiments of BPB are conducted and qualified BPB is obtained,which demonstrates that the presented MDFEF process and equipment are applicable to manufacture BPB with thin skin and high reinforcing ribs.
基金the National Science and Technology Major Project of China(No.2019-Ⅶ-0017-0158)the National Natural Science Foundation of China(Nos.U2037204,U21A20131)the Innovative Research Team Development Program of Ministry of Education of China(No.IRT17R83)for the support given to this research。
文摘To achieve the manufacturing of Thin-Wall and High-Rib Components(TWHRC)with high precision,a novel heavy load Multi-DOF Envelope Forming Press(MEFP)with Parallel Kinematic Mechanism(PKM),driven by six Permanent Magnet Synchronous Motors(PMSMs),is developed.However,on account of the heavy forming load,the PMSM parameters are in great variation.Meanwhile,the PMSM is always in a transient state caused by fast time-varying forming load,resulting in low identification precision of varied PMSM parameters and control precision of PMSM under traditional parameter identification methods.To solve this problem,a novel Sliding Mode Control Method with Enhanced PMSM Parameter Identification(SMCMEPPI)for heavy load MEFP is proposed.Firstly,the kinematic model of MEFP is established.Secondly,the variation law of PMSM parameters under heavy load is revealed.Thirdly,an enhanced PMSM parameter identification method is proposed,in which the q axis current of PMSM is used to represent the changing rate of forming load and the adjustment factor is first proposed to remove improper input of PMSM parameter identification online.Fourthly,the Electromechanical Coupling Dynamic Model(ECDM)of MEFP,which includes identified PMSM parameters,is developed.Finally,based on the developed ECDM,a novel SMCMEPPI is proposed to realize the high-precision control of heavy load MEFP.The experimental results indicate that the proposed SMCMEPPI can significantly improve the control precision of heavy load MEFP.
文摘The stratospheric airship is affected by harsh conditions in the stratosphere environment.To ensure the safety of the airship,it is necessary to detect the material state of the airship envelope.Since digital image correlation possesses non-contact strain measurement ability,this paper explores the infuence of different shapes of the subset on measurement accuracy.Through the results,it is found that increasing the aspect ratio of subsets can improve the strain accuracy measured in the c-direction,and reducing the aspect ratio can improve the strain accuracy measured in the y-direction.This trend becomes more obvious as the strain increases.Based on this discovery,a subset adaptive algorithm is proposed.The feasibility of the algorithm is verified by experiments,and the precision of strain measurement can be effectively improved by adjusting the threshold value.Therefore,the algorithm can be utilized to increase the measurement accuracy in the larger strain direction without changing the size of the subset.
基金support from the Natural Science Foundation of Xinjiang Uygur Autonomous Region, China (Grant No. 2024D01E37)the National Natural Science Foundation of China (Grant No. 12473025)+5 种基金supported by grant number ST/T000198/1 from the STFCthe sponsored by Natural Science Foundation of Xinjiang Uygur Autonomous Region, China (Grant No. 2022D01B221)the Xinjiang Tianchi Talent Project (2019)The James Clerk Maxwell Telescope is operated by the East Asian Observatory on behalf of the National Astronomical Observatory of Japan, Academia Sinica Institute of Astronomy and Astrophysics, the Korea Astronomy and Space Science Institute, the National Astronomical Research Institute of Thailand, Center for Astronomical Mega-Science as well as the National Key Research and Development Program of China (Grant No. 2017YFA0402700)support is provided by the Science and Technology Facilities Council of the United Kingdom and participating universities and organizations in the United Kingdom and Canadasupported by the JCMT M22BP013 project。
文摘The circumstellar envelopes(CSE) of asymptotic giant branch(AGB) stars are abundant in molecular emissions, offering valuable insights into the physical and chemical conditions of these evolving stars. In this paper, we report observations of two molecules(CO and SO_(2)) toward four O-rich AGB stars using the James Clerk Maxwell Telescope(JCMT). We detected an unusual SO_(2) spectral feature comprising both broad and narrow components in IK Tau and AP Lyn. The broad line profiles may originate from thermal molecular emission, while the narrow profiles could come from other species(or masers) or astrophysical phenomena occurring within the CSEs of the AGB stars, such as episodic mass loss, bipolar outflows, or emissions associated with the complex physical processes near the central star. The narrow lines of SO_(2) may also arise from vibrationally excited emissions. Additionally, we observed the same U-line in both TX Cam and IK Tau, which may originate from the molecule N^(17)O. We analyzed the identified molecular lines using rotational diagrams to determine their excitation temperatures, column densities, and fractional abundances. This information aids in the constructing of reliable astrochemical models for a more detailed examination of the target stars. The narrow component of the SO_(2) line suggests unusual astrophysical phenomena, making IK Tau and AP Lyn particularly intriguing for further investigation to fully understand the physical processes at play in these sources.
文摘Fine structure and elemental composition of envelopes of 10 taxa of Trachelomonas and Strombomonas from natural freshwater bodies in China were studied and phylogeny of both genera were discussed. The results indicate that iron (Fe) and silicon (Si) are the primary mineral elements of the envelopes. Composition of mineral elements was uncorrelated with envelope color, however, it was highly correlated with the microarchitecture of the envelopes. Content of Si was higher than that of Fe in all species of Strombomonas and some species of Trachelomonas with rough surface. In most species of Trachelomonas, especially those with dense and smoothy surface, content of Fe was higher than that of Si. Based on the above results, we propose to assign those species of Strombomonas into Trachelomonas and consider them as a group of the latter. These species were the most primitive among the group with envelopes in Euglenaceae.
文摘The absence of low-frequency information in seismic data is one of the most difficult problems in elastic full waveform inversion. Without low-frequency data, it is difficult to recover the long-wavelength components of subsurface models and the inversion converges to local minima. To solve this problem, the elastic envelope inversion method is introduced. Based on the elastic envelope operator that is capable of retrieving low- frequency signals hidden in multicomponent data, the proposed method uses the envelope of multicomponent seismic signals to construct a misfit function and then recover the long- wavelength components of the subsurface model. Numerical tests verify that the elastic envelope method reduces the inversion nonlinearity and provides better starting models for the subsequent conventional elastic full waveform inversion and elastic depth migration, even when low frequencies are missing in multicomponent data and the starting model is far from the true model. Numerical tests also suggest that the proposed method is more effective in reconstructing the long-wavelength components of the S-wave velocity model. The inversion of synthetic data based on the Marmousi-2 model shows that the resolution of conventional elastic full waveform inversion improves after using the starting model obtained using the elastic envelope method. Finally, the limitations of the elastic envelope inversion method are discussed.
文摘As in homology, the notion of injectivity is introduced in the category whose objects are Hilbert C * module over a C * algebra and whose morphism are bounded module operators. The definition of injective envelopes of an extension of a Hilbert C * modules over a C * algebra is introduced, and is characterized in terms of the injectivity and essence. It is shown that every Hilbert C * module has a unique (up to H isometrics) injective envelope if it exists. It is also shown that an extension of a Hilbert C * module is an injective envelope if and only if it is an injective and essential extension. Moreover, every Hilbert C * module over a W * algebra has a unique (up to H isometrics) injective envelope and the injective envelope of a Hilbert C * module H is maximal essential extension of H .
基金This work was supported by the National Natural Science Foundation of China(51677144).
文摘Iron loss and copper loss are the significant parts of electrical loss of machines,which are the major parts particularly under high frequency condition.High-speed permanent magnet synchronous machines(HS-PMSM)have the benefits of high power density,high efficiency and wide speed range.Which causes the calculation for iron loss and copper loss in whole operating range complex.By analyzing the components and influencing factors of iron loss and copper loss in stator,we have deduced the calculation formula of iron loss and copper loss in whole operating range based on the analytical solution and finite element approach(EFA)solution.According to the calculation solution,taking the influence of operating temperature on the iron loss and copper loss into account,we propose a temperature correction factor and establish the calculation method for the iron loss and copper loss with temperature influences.Finally,by the conductor transposition,we restrain the circulating current under high-frequency operating condition.
文摘Curtain wall systems have evolved from aesthetic facade elements into multifunctional building envelopes that actively contribute to energy efficiency and climate responsiveness.This reviewpresents a comprehensive examination of curtain walls from an energy-engineering perspective,highlighting their structural typologies(Stick and Unitized),material configurations,and integration with smart technologies such as electrochromic glazing,parametric design algorithms,and Building Management Systems(BMS).Thestudy explores the thermal,acoustic,and solar performance of curtain walls across various climatic zones,supported by comparative analyses and iconic case studies including Apple Park,Burj Khalifa,and Milad Tower.Key challenges—including installation complexity,high maintenance costs,and climate sensitivity—are critically assessed alongside proposed solutions.A central innovation of this work lies in framing curtain walls not only as passive architectural elements but as dynamic interfaces that modulate energy flows,reduce HVAC loads,and enhance occupant comfort.The reviewed data indicate that optimized curtain wall configurations—especially those integrating electrochromic glazing and BIPV modules—can achieve annual energy consumption reductions ranging fromapproximately 5%to 27%,depending on climate,control strategy,and facade typology.The findings offer a valuable reference for architects,energy engineers,and decision-makers seeking to integrate high-performance facades into future-ready building designs.
文摘The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.
文摘The Shipboard Operation Envelope(SOE) is the safe boundary of the helicopter/ship dynamic interface. The night deck on a ship is usually behind the hangar, where the airflow is turbulent due to the influence of the upper structure, wind and ship speed. The turbulent airnow is the major adverse factor for the safety of shipboard operations. In this paper, the night deck abbot is analysed as the superposition of two penyndicular 2-D airflows.N-S equations are used to calculate the velocity field and the range of turbulent airflow using finite element method. The result is correspondent well with test. Incorporating the influence of the airflow and giving some restrictions on the movements of the ship and on the control margin of the helicopter, the operation envelopes are calculated. The operation envelopes include three types for hovering over the deck, taking-off from and landing on ship, and landing with a landing-aid system. These results are helpful to the pilot training and night safety.
文摘Envelope analysis is an effective method for characterizing impulsive vibrations in wired condition monitoring(CM)systems. This paper depicts the implementation of envelope analysis on a wireless sensor node for obtaining a more convenient and reliable CM system. To maintain CM performances under the constraints of resources available in the cost effective Zigbee based wireless sensor network(WSN), a low cost cortex-M4 F microcontroller is employed as the core processor to implement the envelope analysis algorithm on the sensor node. The on-chip 12 bit analog-to-digital converter(ADC) working at 10 k Hz sampling rate is adopted to acquire vibration signals measured by a wide frequency band piezoelectric accelerometer. The data processing flow inside the processor is optimized to satisfy the large memory usage in implementing fast Fourier transform(FFT) and Hilbert transform(HT). Thus, the envelope spectrum can be computed from a data frame of 2048 points to achieve a frequency resolution acceptable for identifying the characteristic frequencies of different bearing faults. Experimental evaluation results show that the embedded envelope analysis algorithm can successfully diagnose the simulated bearing faults and the data transmission throughput can be reduced by at least 95% per frame compared with that of the raw data, allowing a large number of sensor nodes to be deployed in the network for real time monitoring.
文摘The cylindrical worm processed by annular grinding wheel envelope in two degree of freedom motion state is a novel worm. This paper explains the shaping principle of such a worm. To improve meshing quality and the properties of contact and lubrication, the multi objective optimization has been conducted for the first time to the parameters of such a worm pair by the fuzzy optimal method. The results show that, the shape of the contact line is visibly more sloped than before being optimized, lubrication angle is apparently bigger, and the distribution of contact lines is much improved.
基金Project (No. 2011AA7052011) supported by the National High-Tech R&D (863) Program of China
文摘This paper deals with an improved bonding approach of surface-bonded fiber Bragg grating (FBG) sensors for airship envelope structural health monitoring (SHM) under the strain transfer theory. A theoretical formula is derived from the proposed model to predict the strain transfer relationship between the airship envelope and fiber core. Then theoretical predictions are validated by numerical analysis using the finite element method (FEM). Finally, on the basis of the theoretical approach and numerical validation, parameters that influence the strain transfer rate from the airship envelope to fiber core and the ratio of effective sensing length are analyzed, and some meaningful conclusions are provided.
基金Project(51178201) supported by the National Natural Science Foundation of China Project(2011CDB292) supported by the Natural Science Foundation of Hubei Province,China
文摘An active pipe-embedded building envelope, which is an external wall or roof with pipes embedded inside, was presented. This structure may utilize the circulating water in the pipe to transfer heat or coolth inside directly. This kind of structure is named ＂active pipe-embedded building envelope＂ due to dealing with the thermal energy actively inside the structure mass by circulating water. This structure not only deals with thermal energy before the external disturbance becomes cooling/heating load by using the circulating water, but also may use low-grade energy sources such as evaporative cooling, solar energy, and geothermal energy. In the meantime, this structure can also improve the indoor thermal comfort by tempering the internal wall surface temperature variation due to the thermal removal in the mass. This work further presents the thermal performance of this structure under a typical hot summer weather condition by comparing it with that of the conventional external wall/roof with numerical simulation. The results show that this pipe-embedded structure may reduce the external heat transfer significantly and reduce the internal wall surface temperature for improving thermal comfort. This work also presents the effects of the water temperature and the pipe spacing on the heat transfer of this structure. The internal surface heat transfer may reduce by about 2.6 W/mE when the water temperature reduces by 1℃ as far as a brick wall with pipes embedded inside is concerned. When the pipe spacing reduces by 50 mm, the internal wall surface heat flux can also reduce by about 2.3 W/m2.
文摘By use of the two-layer adiabatic globe spectral model and the zonally averaged climatic data of winter season as initial values, 10-day integrations are carried out based on three kinds of model topography (i.e., (1) the averaged topography; (2) the envelope topography; (3) the modified envelope topography). The results show that the orography of the Northern Hemisphere plays an important role in the simulation of large-scale weather patterns in winter season. The simulation based on the envelope topography developed by Wallace et al. has some improvements in the Rocky Mountains area. But this scheme causes very serious horizontal expansion around the Tibetan Plateau (hereafter referred to as the TV). A modified envelope topography scheme has been worked out that increases the slope of the TP by decreasing the horizontal expansion while keeping the maximum altitude. The results show some improvements of the scheme around the TP. By analysis of the mechanical effects of the large-scale orography on the currents, the different forcings of the air flow over and around the TP and the Rocky Mountain (the RM) are investigated.
基金Supported by National Natural Science Foundation of China(Grant Nos.51175316,51575331)
文摘The vibration signal contains a wealth of sensitive information which reflects the running status of the equipment.It is one of the most important steps for precise diagnosis to decompose the signal and extracts the effective information properly.The traditional classical adaptive signal decomposition method,such as EMD,exists the problems of mode mixing,low decomposition accuracy etc.Aiming at those problems,EAED(extreme average envelope decomposition)method is presented based on EMD.EAED method has three advantages.Firstly,it is completed through midpoint envelopment method rather than using maximum and minimum envelopment respectively as used in EMD.Therefore,the average variability of the signal can be described accurately.Secondly,in order to reduce the envelope errors during the signal decomposition,replacing two envelopes with one envelope strategy is presented.Thirdly,the similar triangle principle is utilized to calculate the time of extreme average points accurately.Thus,the influence of sampling frequency on the calculation results can be significantly reduced.Experimental results show that EAED could separate out single frequency components from a complex signal gradually.EAED could not only isolate three kinds of typical bearing fault characteristic of vibration frequency components but also has fewer decomposition layers.EAED replaces quadratic enveloping to an envelope which ensuring to isolate the fault characteristic frequency under the condition of less decomposition layers.Therefore,the precision of signal decomposition is improved.
基金This work was financially supported by National Key R&D Program of China(2022YFD1401200)China Agriculture Research System of MOF and MARA(CARS-24-C-04)+3 种基金National Natural Science Foundation of China(32270294)Ningbo Major Special Projects of the Plan‘Science and Technology Innovation 2025’(2021Z106)the Postdoctoral Science Foundation of Anhui Province,China(2021B558)K.C.Wong Magna Fund in Ningbo University.
文摘Pepper mild mottle virus(PMMoV)is a devastating viral pathogen of pepper(Capsicum annuum)but it is unclear whether and how peppers protect against PMMoV infection.The expression of the chloroplast outer membrane protein 24(OMP24)of C.annuum was upregulated under PMMoV infection and it interacted with PMMoV coat protein(CP).Silencing of OMP24 in either C.annuum or Nicotiana benthamiana facilitated PMMoV infection,whereas overexpression of N.benthamiana OMP24 in transgenic plants inhibited PMMoV infection.Both C.annuum OMP24(CaOMP24)and N.benthamiana OMP24(NbOMP24)localized to the chloroplast and have a moderately hydrophobic transmembrane domain that is necessary for their localization.Overexpression of CaOMP24 induced stromules,perinuclear chloroplast clustering,and accumulation of reactive oxygen species(ROS),the typical defense responses of chloroplasts transferring the retrograde signaling to the nucleus to regulate resistance genes.The expression of PR1 and PR2 was also upregulated significantly in plants overexpressing OMP24.Self-interaction of OMP24 was demonstrated and was required for OMP24-mediated plant defense.Interaction with PMMoV CP interfered with the self-interaction of OMP24 and impaired OMP24-induced stromules,perinuclear chloroplast clustering and ROS accumulation.The results demonstrate the defense function of OMP24 in pepper during viral infection and suggest a possible mechanism by which PMMoV CP modulates the plant defense to facilitate viral infection.
