A comparative study on the laser performance between bonding and non-bonding Er,Pr:GYSGG rods side-pumped by 970-nm laser diodes(LDs) is conducted for the thermal lensing compensation. The analyses of the thermal dist...A comparative study on the laser performance between bonding and non-bonding Er,Pr:GYSGG rods side-pumped by 970-nm laser diodes(LDs) is conducted for the thermal lensing compensation. The analyses of the thermal distribution and thermal focal length show that the bonding rod possesses a high cooling efficiency and weak thermal lensing effect compared with the conventional Er,Pr:GYSGG rod. Moreover, the laser characteristics of maximum output power, slope efficiency, and laser beam quality of the bonding rod with concave end-faces operated at 2.79 μm are improved under the high-repetition-rate operation. A maximum output power of 13.96 W is achieved at 150-Hz and 200-μs pulse width,corresponding to a slope efficiency of 17.7% and an electrical-to-optical efficiency of 12.9%. All results suggest that the combination of thermal bonding and concave end-face is a suitable structure for thermal lensing compensation.展开更多
The problem of end-face cavity formation in parts produced by cross-wedge rolling was studied in order to reduce material consumption.The cavity depth was measured by the displacemern method.Twenty-one different cases...The problem of end-face cavity formation in parts produced by cross-wedge rolling was studied in order to reduce material consumption.The cavity depth was measured by the displacemern method.Twenty-one different cases of rolling were analysed by finile element method to determine the effects of process parameters such as the wedge tool angle,the temperature of material,the tool velocity and the reduction ratio on the depth of end-face cavities.Relationships between these parameters are examined in order to establish depe ndencies enabling quick and simple selection of a con cavity allowance in order to remove the cavities.The equations for calculating the con cavity allowance were verified in an experimental process for manufacturing ball pins with the use of flat tools.Rolling tests were performed using a billet with its length selected in compliance with the established dependencies.The experimental results demonstrate that the proposed solution is a viable method for end-face cavity removal.展开更多
One method based on the end-face reflection as a reference was used to measure weak grating reflectivity of 0.01%-1%. For measuring ultra-weak grating reflectivity, the grating group with an identical wavelength was u...One method based on the end-face reflection as a reference was used to measure weak grating reflectivity of 0.01%-1%. For measuring ultra-weak grating reflectivity, the grating group with an identical wavelength was used. By using anhydrous alcohol and deionized water as the reflecting medium, the single- pulse FBG reflectivity of a highly doped-Ge photosensitive fiber was calculated to be about 0.747% and 0.739%, respectively; and the single-pulse FBG reflectivity of ordinary SMF fiber was about 0.016% and 0.015%, respectively. The consistent results by the two different reflecting media showed that the end-face reflection method on the grating group was feasible.展开更多
According to the analysis of the mechanism of top coal caving, the caving condition was pointed out, and many factors of caving were also determined. Then the relationship between factors and caving was studied. Based...According to the analysis of the mechanism of top coal caving, the caving condition was pointed out, and many factors of caving were also determined. Then the relationship between factors and caving was studied. Based on the above research, one effective method by using field monitoring was brought forward to determine the controlling factor. Then some related key technologies were provided, such as keeping the integrality of the top-coal, raising the horizontal resistance of supports and decreasing the real end-face distance etc.. At last one application of this method was presented, and it was proved to be an effective method.展开更多
In this paper, the law of roof-coal movement has been investigated through the field measurement, theoretical analysis and numerical calculation. Several results, which are of important values for caving process, desi...In this paper, the law of roof-coal movement has been investigated through the field measurement, theoretical analysis and numerical calculation. Several results, which are of important values for caving process, design of the supports, controlling end-face stability, raising recovery rate, realizing working face high output and other related aspects in practice, have been obtained. These results mainly include the following: roof-coal breaking curve of soft-coal seam, roof-coal movement curve of soft-coal and medium-hard coal seam, and roof-coal movement equation. The roof-coal caveability has been analyzed.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51872290,51702322,and 51802307)the National Key Research and Development Program of China(Grant No.2016YFB1102301)
文摘A comparative study on the laser performance between bonding and non-bonding Er,Pr:GYSGG rods side-pumped by 970-nm laser diodes(LDs) is conducted for the thermal lensing compensation. The analyses of the thermal distribution and thermal focal length show that the bonding rod possesses a high cooling efficiency and weak thermal lensing effect compared with the conventional Er,Pr:GYSGG rod. Moreover, the laser characteristics of maximum output power, slope efficiency, and laser beam quality of the bonding rod with concave end-faces operated at 2.79 μm are improved under the high-repetition-rate operation. A maximum output power of 13.96 W is achieved at 150-Hz and 200-μs pulse width,corresponding to a slope efficiency of 17.7% and an electrical-to-optical efficiency of 12.9%. All results suggest that the combination of thermal bonding and concave end-face is a suitable structure for thermal lensing compensation.
文摘The problem of end-face cavity formation in parts produced by cross-wedge rolling was studied in order to reduce material consumption.The cavity depth was measured by the displacemern method.Twenty-one different cases of rolling were analysed by finile element method to determine the effects of process parameters such as the wedge tool angle,the temperature of material,the tool velocity and the reduction ratio on the depth of end-face cavities.Relationships between these parameters are examined in order to establish depe ndencies enabling quick and simple selection of a con cavity allowance in order to remove the cavities.The equations for calculating the con cavity allowance were verified in an experimental process for manufacturing ball pins with the use of flat tools.Rolling tests were performed using a billet with its length selected in compliance with the established dependencies.The experimental results demonstrate that the proposed solution is a viable method for end-face cavity removal.
基金Funded by the National Natural Science Foundation of China (Nos.61205070 and 61290311)
文摘One method based on the end-face reflection as a reference was used to measure weak grating reflectivity of 0.01%-1%. For measuring ultra-weak grating reflectivity, the grating group with an identical wavelength was used. By using anhydrous alcohol and deionized water as the reflecting medium, the single- pulse FBG reflectivity of a highly doped-Ge photosensitive fiber was calculated to be about 0.747% and 0.739%, respectively; and the single-pulse FBG reflectivity of ordinary SMF fiber was about 0.016% and 0.015%, respectively. The consistent results by the two different reflecting media showed that the end-face reflection method on the grating group was feasible.
文摘According to the analysis of the mechanism of top coal caving, the caving condition was pointed out, and many factors of caving were also determined. Then the relationship between factors and caving was studied. Based on the above research, one effective method by using field monitoring was brought forward to determine the controlling factor. Then some related key technologies were provided, such as keeping the integrality of the top-coal, raising the horizontal resistance of supports and decreasing the real end-face distance etc.. At last one application of this method was presented, and it was proved to be an effective method.
文摘In this paper, the law of roof-coal movement has been investigated through the field measurement, theoretical analysis and numerical calculation. Several results, which are of important values for caving process, design of the supports, controlling end-face stability, raising recovery rate, realizing working face high output and other related aspects in practice, have been obtained. These results mainly include the following: roof-coal breaking curve of soft-coal seam, roof-coal movement curve of soft-coal and medium-hard coal seam, and roof-coal movement equation. The roof-coal caveability has been analyzed.
