Formulating oil-based drilling fluids(OBDFs)with an ultra-low oil-to-water ratio(OWR≤60:40)presents a formidable stability challenge due to the maximized interfacial area and intensified stress on the interfacial fil...Formulating oil-based drilling fluids(OBDFs)with an ultra-low oil-to-water ratio(OWR≤60:40)presents a formidable stability challenge due to the maximized interfacial area and intensified stress on the interfacial film under high-temperature,high-density conditions.To address this,we engineered a synergistic stabilization system through molecular and colloidal design.A novel hyperbranched polyamide emulsifier(epoxidized soybean oil polyamide)(ESOP),synthesized from epoxidized soybean oil,exhibits superior thermal stability and interfacial activity due to its hyperbranched architecture.Combined with calcium petroleum sulfonate(CPS)and hydrophobic nanosilica(HNs),it enables a high-performance OBDF with an ultra-low OWR of 60:40.The results show that the optimized formula achieves an excellent demulsification voltage of 1290 V,an ultra-low HTHP fluid loss of 1.5 mL,a yield point of 12.9 Pa,and a superior sag factor(SF)of 0.504,outperforming both base and commercial systems.Mechanistic studies reveal a multiscale stabilization strategy involving a dense composite interfacial film,Pickering stabilization,a 3D network,and a unique thermally triggered self-reinforcement effect.This work not only provides a cost-effective OBDF formulation but,more importantly,establishes a molecular topology engineering paradigm for stabilizing complex industrial fluids under extreme conditions.展开更多
In recent years,the amount of waste generated during milling has increased dramatically,and improper disposal poses a significant environmental challenge.To mitigate environmental pollution and enhance the road perfor...In recent years,the amount of waste generated during milling has increased dramatically,and improper disposal poses a significant environmental challenge.To mitigate environmental pollution and enhance the road performance of emulsified asphalt cold recycled mixtures(ECRM),this study employed recycled asphalt pavement(RAP)and reclaimed inorganic binder stabilized aggregate(RAI)as dual recycled materials for ECRM preparation.The blending ratios of reclaimed base and surface layer mixtures significantly influence ECRM's performance,with adjusted proportions substantially improving compressive strength and dynamic modulus.Firstly,three distinct proportioning options were developed for the recycled materials.Mix designs incorporating varying RAP/RAI ratios were used to determine the optimal mix parameters:moisture content,cement dosage,and emulsified asphalt content.Subsequently,comprehensive performance evaluations were conducted through high-temperature wheel tracking tests,freeze-thaw splitting tests,uniaxial compression tests,and dynamic modulus measurements to analyze the pavement characteristics of the three ECRM formulations.Experimental results demonstrate:Compared with ECRM with a blending ratio of RAP:RAI:new aggregate=30:50:20(Option 1),the dynamic stability,freeze-thaw splitting strength ratio,compressive strength,and compressive resilient modulus of ECRM under Option 3(RAP:RAI:new aggregate=50:30:20)decreased by 31.8%,5.2%,16.4%,and 13.1%,respectively.This indicates that increasing RAP content while reducing RAI proportion enhances the tensile strength of ECRM,yet adversely affects its high-temperature stability,moisture resistance,and compressive performance.This work not only addresses the challenge of jointly utilizing asphalt pavement waste and base waste,but also provides a cost-effective and sustainable method for the stable application of milling material resources in road engineering.展开更多
Waterborne acrylic coatings are widely utilized due to their cost-effectiveness,high transparency,strong resistance to weather and chemicals,impressive mechanical properties,and excellent adhesion to various substrate...Waterborne acrylic coatings are widely utilized due to their cost-effectiveness,high transparency,strong resistance to weather and chemicals,impressive mechanical properties,and excellent adhesion to various substrates.In these coatings,a reactive emulsifier containing phosphate groups can be integrated into the molecular chain during polymerization,which enhances the coating's compactness and corrosion resistance.This work focuses on the synthesis of styrene-butyl acrylate(St-BA)latex and methyl methacrylate-butyl acrylate(MMA-BA)latex using the reactive phosphate emulsifier ANPEO_(10)-P_(1) through seed emulsion polymerization,achieving a conversion rate of approximately 99%and a solid content close to 50%.The resulting coatings from St-BA and MMA-BA latexes demonstrated long-term corrosion protection for carbon steel and aluminum alloy due to in-situ phosphatization,effectively preventing flash rust.Notably,the MMA-BA coating exhibited remarkable durability,enduring immersion for up to 1224 h(51 d)on Q 235 carbon steel before reaching the failure threshold(|Z|0.01 Hz£106Ω·cm^(2))on Q 235 carbon steel.On 5052 aluminum alloy,the St-BA coating maintained|Z|0.01 Hz>10^(8)Ω·cm^(2) for 480 h(20 d).Furthermore,the corrosion resistance of St-BA and MMA BA coatings on Q 235 steel sheet and 5052 aluminum alloy surpassed that of commercially available MMA-BA and St BA coatings after immersion in a 3.5 wt%NaCl aqueous solution.This work also delves into the anticorrosion mechanism of MMA-BA and St-BA coatings.展开更多
The trends of consuming or using eco-friendly,biodegradable products due to the change in the lifestyle of the people have led to the exploration of new sources from plants or animals.Seed mucilage(SeM)is an underexpl...The trends of consuming or using eco-friendly,biodegradable products due to the change in the lifestyle of the people have led to the exploration of new sources from plants or animals.Seed mucilage(SeM)is an underexplored component of plants that can be brought into play to deal with such problems.Mucilage,a viscous polysaccharide that can be obtained when seeds like chia,flax,garden cress,and tomato get hydrated and form a slimy,gel-like substance around the seed coat,can be utilized due to its unique characteristics.It has been used in developing many products such as bio-based films,plant-based dressing wounds with antibacterial effects,a medium for oral drug delivery,edible coatings,etc.Primarily composed of soluble fiber,it exhibits effects on human health,including blood glucose management,cholesterol,weight reduction,antioxidant(AOx),and antimicrobial activity.It offers a range of functional properties,including emulsification,stabilization,foam formation,fat replacement,encapsulating agent,flocculation,coagulation,and medium for drug release.These attributes make SeM a suitable component for applications in various sectors like food and pharmacy.Further study in this field may open more opportunities to address environmental problems and contribute to sustainability.This review explores aspects of SeM,emphasizing its functional properties and highlighting its current as well as potential applications across various sectors.展开更多
The Makran Sea is a complex marine environment.The purpose of this research is screening of emulsifier-producing bacteria in this marine environment and optimization of emulsifier production by the best-producing stra...The Makran Sea is a complex marine environment.The purpose of this research is screening of emulsifier-producing bacteria in this marine environment and optimization of emulsifier production by the best-producing strain.Marine samples(seawater and sediments)were collected from four different zones in the Makran Sea.The emulsification activity index(E_(24))and Bacterial Ad-hesion To Hydrocarbons(BATH)were used to select the best emulsifier-producing strains.The prevalent strains were identified by PCR.The optimization of the emulsifier production medium by the best strain was done by two-level factorial design.Seventeen emulsifier-producing strains were isolated from sediments and seawater in the Makran Sea.The strains M6,BS-2,and J6 were select-ed between all isolates because they have 83%,91%,and 85%emulsification activity(E_(24))respectively.The results of sequencing confirmed that these three strains(M6,BS-2,and J6)belong to Cobetia marina,Shewanella alga,and Thalassospira permensis re-spectively.Maximum emulsifier production occurred at crude oil concentration(4%,v/v),peptone(2.5 g/L),yeast extract(1.5 g/L),molasses(2%),and at a temperature of 25℃.The results of this research confirmed that the Makran Sea has the potential to reach ro-bust marine bacteria with different biotechnological applications.展开更多
Responsive nanocontainers have dual functions in targeted delivery of corrosion inhibitors and emulsion development of shale oil in oil and gas fields,exhibiting potential for simultaneously achieving metal protection...Responsive nanocontainers have dual functions in targeted delivery of corrosion inhibitors and emulsion development of shale oil in oil and gas fields,exhibiting potential for simultaneously achieving metal protection and efficient oil and gas development from a material perspective.Here,we propose the preparation of a pH-responsive nanocontainer,HMSNs-g-PDEAEMA(poly[2-(N,N-diethyl amino)ethyl-methacrylate](PDEAEMA)grafted onto hollow mesoporous spherical silica(HMSNs)),to integrate the delivery of 2-mercaptobenzothiazole(MBT)for targeted corrosion inhibition and the emulsification of oil as Pickering emulsifiers.Under acidic conditions(reduced pH value caused by localized corrosion or high concentration acidic gases),PDEAEMA chains are protonated and extended by electrostatic repulsion,exposing pores on HMSNs surface and allowing the controlled release of loaded MBT molecules.Once transforming into a neutral or alkaline environment,the responsive release of the MBT process is inhibited.After the fluid passes through the wellbore and enters the shale layer,the HMSNs-g-PDEAEMA nanocontainers act as Pickering emulsifiers to achieve emulsification.The emulsified oil can be extracted onto the ground more efficiently,and a following pH-responsive demulsification process can be achieved.Overall,through a pH-responsive nanocontainer material,the dual function of corrosion inhibition and emulsification in oil and gas development is possible to be simultaneously achieved.展开更多
W/O/W multi-structure emulsions were prepared by two-step method,to investigate the effect of different W/O emulsifier,anionic emulsifier as well as the first phase volume ratio on the formation and stability of multi...W/O/W multi-structure emulsions were prepared by two-step method,to investigate the effect of different W/O emulsifier,anionic emulsifier as well as the first phase volume ratio on the formation and stability of multi-structure emulsions.The result indicated that ES-5300 is efficient in forming the homogeneous and stable W/O/W multi-structure emulsions which related to the emulsifier structure and low HLB value.Compared with other anionic emulsifier,sodium isostearoyl lactylate can product more stable multi-structure emulsions.However,the higher temperature stability was affected by the increasing of it.In addition,appropriate first phase volume ratio is critical to the stability of multi-structure emulsions.The multi-structure emulsions with better encapsulation efficiency and great performance in higher temperature was achieved when the first phase volume ratio equal to 1.展开更多
[Objective] The properties of butachlor microemulsion were studied for developing a new formulation of new pesticides.[Method]AT method was used to determine the pseudo-ternary phase diagram to confirm the formulation...[Objective] The properties of butachlor microemulsion were studied for developing a new formulation of new pesticides.[Method]AT method was used to determine the pseudo-ternary phase diagram to confirm the formulation of butachlor microemulsion.Through the measurement of electrical conductivity,the W/O and O/W types in microemulsion region of butachlor/emulsifier/water system were confirmed and the change of phase behavior during preparation process was discussed.[Result]The dilution stability,low temperature stability,heat stability,ageing stability,density and viscosity etc.of butachlor microemulsion met the requirement of the experiments,which demonstrated the qualified quality of butachlor.The density decreased linearly with the increase of temperature and the change of viscosity with temperature conformed to Andrade equation.[Conclusion]The research was helpful to the application of butachlor microemulsion in pesticide formulation.展开更多
Objective:To explore the effect of emulsified isoflurane(EI)on apoptosis of anoxia-reoxygenation neonatal rat cardiomyocytea and relevant protein expression.Methods:Cardiac muscle anoxiareoxygenation damage model was ...Objective:To explore the effect of emulsified isoflurane(EI)on apoptosis of anoxia-reoxygenation neonatal rat cardiomyocytea and relevant protein expression.Methods:Cardiac muscle anoxiareoxygenation damage model was established with culture in vitro neonatal rat cardiomyocytes.The cardiomyocytes were divided into control group,model group,fat emulsion group and EI group.The cardiomyocytes apoptosis rates and lactic dehydrogenase(LDH),superoxide dismutase(SOD)and malondialdehyde(MDA)index standardization were detected after relevant treatment The expression of apoptosis-related proteins Bel-2,Bax and Caspase-3 were detected with Western blot approach.Results:After hypoxia/reoxygenation(H/R)model was treated by EI,the cells apoptosis rate decreased and was dramatically below the fat emulsion group(P<0.05),Cardiomyocytes biochemical index detection presented that,compared with the control group that the LDH activity and MDA content dramatically increased(P<0.05),while the SOD activity notably decreased(P<0.05);compared with the H/R group,the SOD activity of the fat emulsion group and EI group increased(P<0.05);while the LDH activity and MDA content decreased(P<0.05).And the change of the EI group was more remarkable than the fat emulsion group(P<0.05).The Western blot analysis presented that,compared with the control group,the Bcl-2 protein expression of the other groups significantly decreased(P<0.05),the expressions of Bax protein and Caspase-3protein increased significantly(P<0.05);compared with H/R group,cardiomyocytes Bc1-2protein expression of EI group increased significantly(P<0.05),the expressions of Bax protein and Caspase-3 protein decreased significantly(P<0.05),and the change of EI group was more remarkable than the fat emulsion group(P<0.05).Conclusions:EI can inhabit the apoptosis of anoxia-reoxygenation damage model cardiomyocytes,and may he related to the up-regulation of expression of Bcl-2 and down-regulation of expression of Caspase-3 protein.展开更多
In order to study the application of gyratory compaction molding method in emulsified asphalt cold recycled mixture and optimize the relevant technical parameters, the study was carried out according to splitting stre...In order to study the application of gyratory compaction molding method in emulsified asphalt cold recycled mixture and optimize the relevant technical parameters, the study was carried out according to splitting strength, stability and water stability test;the design of the experiment involved changing gyration number, emulsified asphalt and water content, molded specimen temperature and other factors to analyze the volume parameters, mechanical properties and water stability. The results show that both the maximum dry density and dry and wet splitting strength ratio(DWSSR) of emulsified asphalt cold reclaimed mixture are improved by the rotary compacting method, while the porosity and the optimal dosage of water are reduced. Furthermore, with the increase of compaction times, the porosity and splitting strength index both change exponentially. DWSSR and porosity are consistent with quadratic functions. The use of gyratory compaction for 70 times at 25 °C and the optimum dosage of emulsified asphalt can be determined based on the splitting strength ratio. The high-temperature stability and water damage resistance of the pavement can be improved by the use of rotary compacting method effectively, and the early strength and road performance are higher than the regulatory requirements.展开更多
This study characterized and compared the physical and emulsifying properties of pea protein(PP)and its modified proteins(ultrasound treated-PP(PPU),flaxseed gum(FG)treated PP(PPFG)and ultrasound treated-PPFG(PPFGU))....This study characterized and compared the physical and emulsifying properties of pea protein(PP)and its modified proteins(ultrasound treated-PP(PPU),flaxseed gum(FG)treated PP(PPFG)and ultrasound treated-PPFG(PPFGU)).The results showed FG triggered the formation of loosely attached complex with PP via physical modification under gentle magnetic stirring at pH 7.0,while ultrasound played an important role in reducing protein size,increasing surface hydrophobicity and molecular fluidity onto oil-water interface.So ultrasound further enhanced the interaction of PP with FG,and produced the PPFGU complex with smaller droplet size,higherζ-potential and lower turbidity.Further,combination of FG and ultrasound improved the physical properties of PP with higher viscosity,stiffer gels(defined as higher elastic modulus),stronger hydrophobic properties,better thermal stability,and fast protein absorption rate.Therefore,the PPFGU coarse emulsion performed highest emulsifying activity index(EAI)and emulsion stability index(ESI)that the stabilized nanoemulsion obtained smallest droplet size,higherζ-potential,and longest storage stability.The combination of FG and ultrasonic treatment will be an effective approach to improving the emulsifying property and thermal stability of PP,which can be considered as a potential plant-based emulsifier applied in the food industry.展开更多
The desensitization degree of emulsion explosives （EE） was calculated with the peak pressure of explosion shock waves tested in water. To an explosive, the less the desensitization degree, the better the compression...The desensitization degree of emulsion explosives （EE） was calculated with the peak pressure of explosion shock waves tested in water. To an explosive, the less the desensitization degree, the better the compression resistance, so the compression resistance of an explosive can be compared and analyzed quantificationally with the desensitization degree. The influence of an emulsifier on the pressure desensitization of EE was studied, including the content and category of emulsifiers. Three kinds of emulsifiers （Span-80, compound emulsifier, and T-152） were used in the tests. The experimental results show that both the content and category of emulsifiers make a great effect on the pressure desensitization of EE. The desensitization degree of EE reduces with the emulsifier content being increased, but there is an optimal content of an emulsifier for the compression resistance of EE. While the content of Span-80 reaches 4wt%, the desensitization degree of EE becomes a minimal value, and augments somewhat if the emulsifier content is increased more. That is to say, the compression resistance of EE becomes the highest while the content of Span-80 is 4wt%, and the compression resistance will decline if the content of Span-80 is increased more. The compression resistance of the explosive emulsified by compound emulsifier is the highest among all the explosives, when the content of the whole components and manufacturing engineering are kept invariable.展开更多
The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The ...The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization. (c) 2007 Cheng You Kan. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
Autophagy plays essential roles in cell survival.However,the functions and regulation of the autophagy-related proteins Atg5,LC3B,and Beclin 1 during anesthetic-induced developmental neurotoxicity remain unclear.This ...Autophagy plays essential roles in cell survival.However,the functions and regulation of the autophagy-related proteins Atg5,LC3B,and Beclin 1 during anesthetic-induced developmental neurotoxicity remain unclear.This study aimed to understand the autophagy pathways and mechanisms that affect neurotoxicity,induced by the anesthetic emulsified isoflurane,in rat fetal neural stem cells.Fetal neural stem cells were cultured,in vitro,and neurotoxicity was induced by emulsified isoflurane treatment.The effects of pretreatment with the autophagy inhibitors 3-methyladenine and bafilomycin and the effects of transfection with small interfering RNA against ATG5(siRNA-Atg5)were observed.Cell viability was determined using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay,and apoptosis was assessed using flow cytometry.Ultrastructural changes were analyzed through transmission electron microscopy.The levels of the autophagy-related proteins LC3B,Beclin 1,Atg5,and P62 and the pro-apoptosis-related protein caspase-3 were analyzed using western blot assay.The inhibition of cell proliferation and that of apoptosis rate increased after treatment with emulsified isoflurane.Autophagolysosomes,monolayer membrane formation due to lysosomal degradation,were observed.The autophagy-related proteins LC3B,Beclin 1,Atg5,and P62 and caspase-3 were upregulated.These results confirm that emulsified isoflurane can induce toxicity and autophagy in fetal neural stem cells.Pre-treatment with 3-methyladenine and bafilomycin increased the apoptosis rate in emulsified isoflurane-treated fetal neural stem cells,which indicated that the complete inhibition of autophagy does not alleviate emulsified isoflurane-induced fetal neural stem cell toxicity.Atg5 expression was decreased significantly by siRNA-Atg5 transfection,and cell proliferation was inhibited.These results verify that the Atg5 autophagy pathway can be regulated to maintain appropriate levels of autophagy,which can inhibit the neurotoxicity induced by emulsified isoflurane anesthetic in fetal neural stem cells.展开更多
The polyacrylate latexes were synthesized via pre-emulsified and semi-continuous seeded emulsion polymerization technology when conventional surfactant or polymerizable surfactant was used as emulsifiers. The resultan...The polyacrylate latexes were synthesized via pre-emulsified and semi-continuous seeded emulsion polymerization technology when conventional surfactant or polymerizable surfactant was used as emulsifiers. The resultant latexes and their films were characterized with the contact angle determinator and rheometer. Effect of the polymerizable surfactant on water resistance, stability and rheology of the latex was studied. Results show that the water resistance of film is increased first then decreased with the increase of the amount of the polymerizable surfactant. There exists the optimum value of the amount of the polymerizable surfactant for the water resistance of the film. In comparison with the latex prepared with the conventional surfactant, both the mechanical stability and the freezing-thaw stability of the latex are improved when the polymerizable surfactant is used during the course of the emulsion polymerization. The resultant latex has rheological properties of pseudo-plastic fluid and belongs to non-Newtonian fluid.展开更多
The epoxy resin polymer cement mortars with excellent performances were made up through modifying ordinary Portland cement with emulsified epoxy and micro fine slag.The microstructure of the epoxy resin polymer cemen...The epoxy resin polymer cement mortars with excellent performances were made up through modifying ordinary Portland cement with emulsified epoxy and micro fine slag.The microstructure of the epoxy resin polymer cement materials was studied and their hydration and hardening characteristics were discussed by means of modern analysis measures such as SEM,XRD and Hg intrusion micromeritics.The experimental results indicate that the series effects of water reducing,density,pozzolanicity,filling and solidification crosslinking through the action together with epoxy organism and micro fine slag endowed cement based materials with perfect performances.The main hydration products in the system are C S H gel and hydrated calcium aluminate.At later age,AFt can be in existence,and no Ca(OH) 2 is found.When epoxy resin is solidified,the organism is in a network structure.In the micro pore structure of hydrated cement with modified epoxy and fine slag,big harmful pores were fewer,more harmless abundant micro pores were and the possible pore radius was smaller than that of ordinary Portland cement.展开更多
Under repeated train-induced loads, cement and emulsified asphalt mortar(CA mortar) as a viscoelastic material has a time-dependent deformation, part of which is irreversible. This could lead to debonding between the ...Under repeated train-induced loads, cement and emulsified asphalt mortar(CA mortar) as a viscoelastic material has a time-dependent deformation, part of which is irreversible. This could lead to debonding between the mortar layer and the track slab. Based on the theory of viscoelasticity and the analytical method of the time hardening law(THL), the viscoelastic deformation behavior of CA mortar was studied. Using ABAQUS, we established a solid model of China railway track system(CRTS) Ⅰ prefabricated slab track, with CA mortar at different initial Young’s moduli under cyclic loading corresponding to the influence of actual train loads. The results reveal that the fitted parameters of the THL for CA mortar are suitable for describing its viscoelastic deformation. As the initial Young’s modulus increases, the strain difference before and after cyclic loading gradually decreases, and the displacement difference increases from 0.2 mm to 0.6 mm. The deformation mainly occurs at the end of a mortar layer with longitudinal distribution of about 2.5 times the fasteners’ spacing. It follows that the viscoelastic performance of CA mortar is one of the most important reasons that cause debonding underneath the track slab. Therefore, we suggest that the adverse effects of viscoelastic behavior of CA mortar should be considered when researching such deformation and damage.展开更多
The microemulsified acid system composed by diesel oil, hydrochloric acid and emulsifier was investi- gated in this paper. The stability of microemulsified acid and the phase behavior of the microemulsified system Wer...The microemulsified acid system composed by diesel oil, hydrochloric acid and emulsifier was investi- gated in this paper. The stability of microemulsified acid and the phase behavior of the microemulsified system Were studied. The size distribution and the corrosion inhibition performance were also observed. The results showed that the diesel oil microemulsified acid system possessed small size and good stability under different temperature.The tolerance to CaCl2 reached 80 g·L^-1. Compared with the same concentration hydrochloric acid solution, the corrosion inhibition performance of the diesel oil microemulsified acid system was remarkable.展开更多
In this study,various nonionic surfactants(NS) with different ethylene oxide(EO) numbers and tail lengths and its binary blends with anionic surfactants(AS) were used as emulsifiers for naphthenic oil to form the micr...In this study,various nonionic surfactants(NS) with different ethylene oxide(EO) numbers and tail lengths and its binary blends with anionic surfactants(AS) were used as emulsifiers for naphthenic oil to form the microemulsion metalworking fluids(MWFs),and the effects of them on the stability of the emulsion system were investigated by formulation triangle method.The results indicated that binary complex surfactants of NS and AS as emulsifiers exhibited better emulsifying effect than that of single NS.NS with different EO numbers and tail lengths presented various emulsifying effects.NS(EO=10)exhibited the greatest number of stable formulations,especially the TX-10,but no linear relationship existed between the number of stable formulations and the tail length of NS.In addition,aromatic primary alcohol ethoxy late(APAE) series surfactants containing benzene groups similar to the cycloalkanes in the naphthenic oil so that presented the best emulsifying affect and the greatest number of stable formulations.The co-surfactant of sodium dodecyl benzene sulfonate(SDBS) binary blends with NS exerted the best synergistic effect,and the stable formulations numbers were ranged from 5 to 7,next sodium stearate(SS) comes last followed by sodium dodecyl sulfate(SDS-1) and sodium dodecyl sulfonate(SDS-2).展开更多
基金supported by the Key Research and Development Program Project of Hubei Province(2023BCB070).
文摘Formulating oil-based drilling fluids(OBDFs)with an ultra-low oil-to-water ratio(OWR≤60:40)presents a formidable stability challenge due to the maximized interfacial area and intensified stress on the interfacial film under high-temperature,high-density conditions.To address this,we engineered a synergistic stabilization system through molecular and colloidal design.A novel hyperbranched polyamide emulsifier(epoxidized soybean oil polyamide)(ESOP),synthesized from epoxidized soybean oil,exhibits superior thermal stability and interfacial activity due to its hyperbranched architecture.Combined with calcium petroleum sulfonate(CPS)and hydrophobic nanosilica(HNs),it enables a high-performance OBDF with an ultra-low OWR of 60:40.The results show that the optimized formula achieves an excellent demulsification voltage of 1290 V,an ultra-low HTHP fluid loss of 1.5 mL,a yield point of 12.9 Pa,and a superior sag factor(SF)of 0.504,outperforming both base and commercial systems.Mechanistic studies reveal a multiscale stabilization strategy involving a dense composite interfacial film,Pickering stabilization,a 3D network,and a unique thermally triggered self-reinforcement effect.This work not only provides a cost-effective OBDF formulation but,more importantly,establishes a molecular topology engineering paradigm for stabilizing complex industrial fluids under extreme conditions.
基金sponsored by National Natural Science Foundation of China(No.52308466)SASAC Science and Technology Innovation Project(JF-23-01-0063)Shaanxi Provincial Transportation Research Project(25-84 K,25-85 K).
文摘In recent years,the amount of waste generated during milling has increased dramatically,and improper disposal poses a significant environmental challenge.To mitigate environmental pollution and enhance the road performance of emulsified asphalt cold recycled mixtures(ECRM),this study employed recycled asphalt pavement(RAP)and reclaimed inorganic binder stabilized aggregate(RAI)as dual recycled materials for ECRM preparation.The blending ratios of reclaimed base and surface layer mixtures significantly influence ECRM's performance,with adjusted proportions substantially improving compressive strength and dynamic modulus.Firstly,three distinct proportioning options were developed for the recycled materials.Mix designs incorporating varying RAP/RAI ratios were used to determine the optimal mix parameters:moisture content,cement dosage,and emulsified asphalt content.Subsequently,comprehensive performance evaluations were conducted through high-temperature wheel tracking tests,freeze-thaw splitting tests,uniaxial compression tests,and dynamic modulus measurements to analyze the pavement characteristics of the three ECRM formulations.Experimental results demonstrate:Compared with ECRM with a blending ratio of RAP:RAI:new aggregate=30:50:20(Option 1),the dynamic stability,freeze-thaw splitting strength ratio,compressive strength,and compressive resilient modulus of ECRM under Option 3(RAP:RAI:new aggregate=50:30:20)decreased by 31.8%,5.2%,16.4%,and 13.1%,respectively.This indicates that increasing RAP content while reducing RAI proportion enhances the tensile strength of ECRM,yet adversely affects its high-temperature stability,moisture resistance,and compressive performance.This work not only addresses the challenge of jointly utilizing asphalt pavement waste and base waste,but also provides a cost-effective and sustainable method for the stable application of milling material resources in road engineering.
基金Project(52373065)supported by the National Natural Science Foundation of ChinaProject(2220004002898)supported by the Zhuhai Industry University Research Cooperation and Basic and Applied Research Projects,China。
文摘Waterborne acrylic coatings are widely utilized due to their cost-effectiveness,high transparency,strong resistance to weather and chemicals,impressive mechanical properties,and excellent adhesion to various substrates.In these coatings,a reactive emulsifier containing phosphate groups can be integrated into the molecular chain during polymerization,which enhances the coating's compactness and corrosion resistance.This work focuses on the synthesis of styrene-butyl acrylate(St-BA)latex and methyl methacrylate-butyl acrylate(MMA-BA)latex using the reactive phosphate emulsifier ANPEO_(10)-P_(1) through seed emulsion polymerization,achieving a conversion rate of approximately 99%and a solid content close to 50%.The resulting coatings from St-BA and MMA-BA latexes demonstrated long-term corrosion protection for carbon steel and aluminum alloy due to in-situ phosphatization,effectively preventing flash rust.Notably,the MMA-BA coating exhibited remarkable durability,enduring immersion for up to 1224 h(51 d)on Q 235 carbon steel before reaching the failure threshold(|Z|0.01 Hz£106Ω·cm^(2))on Q 235 carbon steel.On 5052 aluminum alloy,the St-BA coating maintained|Z|0.01 Hz>10^(8)Ω·cm^(2) for 480 h(20 d).Furthermore,the corrosion resistance of St-BA and MMA BA coatings on Q 235 steel sheet and 5052 aluminum alloy surpassed that of commercially available MMA-BA and St BA coatings after immersion in a 3.5 wt%NaCl aqueous solution.This work also delves into the anticorrosion mechanism of MMA-BA and St-BA coatings.
文摘The trends of consuming or using eco-friendly,biodegradable products due to the change in the lifestyle of the people have led to the exploration of new sources from plants or animals.Seed mucilage(SeM)is an underexplored component of plants that can be brought into play to deal with such problems.Mucilage,a viscous polysaccharide that can be obtained when seeds like chia,flax,garden cress,and tomato get hydrated and form a slimy,gel-like substance around the seed coat,can be utilized due to its unique characteristics.It has been used in developing many products such as bio-based films,plant-based dressing wounds with antibacterial effects,a medium for oral drug delivery,edible coatings,etc.Primarily composed of soluble fiber,it exhibits effects on human health,including blood glucose management,cholesterol,weight reduction,antioxidant(AOx),and antimicrobial activity.It offers a range of functional properties,including emulsification,stabilization,foam formation,fat replacement,encapsulating agent,flocculation,coagulation,and medium for drug release.These attributes make SeM a suitable component for applications in various sectors like food and pharmacy.Further study in this field may open more opportunities to address environmental problems and contribute to sustainability.This review explores aspects of SeM,emphasizing its functional properties and highlighting its current as well as potential applications across various sectors.
基金supported by Shahid Bahonar Universi-ty of Kerman.
文摘The Makran Sea is a complex marine environment.The purpose of this research is screening of emulsifier-producing bacteria in this marine environment and optimization of emulsifier production by the best-producing strain.Marine samples(seawater and sediments)were collected from four different zones in the Makran Sea.The emulsification activity index(E_(24))and Bacterial Ad-hesion To Hydrocarbons(BATH)were used to select the best emulsifier-producing strains.The prevalent strains were identified by PCR.The optimization of the emulsifier production medium by the best strain was done by two-level factorial design.Seventeen emulsifier-producing strains were isolated from sediments and seawater in the Makran Sea.The strains M6,BS-2,and J6 were select-ed between all isolates because they have 83%,91%,and 85%emulsification activity(E_(24))respectively.The results of sequencing confirmed that these three strains(M6,BS-2,and J6)belong to Cobetia marina,Shewanella alga,and Thalassospira permensis re-spectively.Maximum emulsifier production occurred at crude oil concentration(4%,v/v),peptone(2.5 g/L),yeast extract(1.5 g/L),molasses(2%),and at a temperature of 25℃.The results of this research confirmed that the Makran Sea has the potential to reach ro-bust marine bacteria with different biotechnological applications.
基金financially supported by the National Natu-ral Science Foundation of China(Nos.52204066 and 52474020)the Shandong Province Youth Entrepreneurship Technology Sup-port Program for Higher Education Institutions(No.2023KJ060)the Fundamental Research Funds for the Central Universities(No.23CX06018A).
文摘Responsive nanocontainers have dual functions in targeted delivery of corrosion inhibitors and emulsion development of shale oil in oil and gas fields,exhibiting potential for simultaneously achieving metal protection and efficient oil and gas development from a material perspective.Here,we propose the preparation of a pH-responsive nanocontainer,HMSNs-g-PDEAEMA(poly[2-(N,N-diethyl amino)ethyl-methacrylate](PDEAEMA)grafted onto hollow mesoporous spherical silica(HMSNs)),to integrate the delivery of 2-mercaptobenzothiazole(MBT)for targeted corrosion inhibition and the emulsification of oil as Pickering emulsifiers.Under acidic conditions(reduced pH value caused by localized corrosion or high concentration acidic gases),PDEAEMA chains are protonated and extended by electrostatic repulsion,exposing pores on HMSNs surface and allowing the controlled release of loaded MBT molecules.Once transforming into a neutral or alkaline environment,the responsive release of the MBT process is inhibited.After the fluid passes through the wellbore and enters the shale layer,the HMSNs-g-PDEAEMA nanocontainers act as Pickering emulsifiers to achieve emulsification.The emulsified oil can be extracted onto the ground more efficiently,and a following pH-responsive demulsification process can be achieved.Overall,through a pH-responsive nanocontainer material,the dual function of corrosion inhibition and emulsification in oil and gas development is possible to be simultaneously achieved.
文摘W/O/W multi-structure emulsions were prepared by two-step method,to investigate the effect of different W/O emulsifier,anionic emulsifier as well as the first phase volume ratio on the formation and stability of multi-structure emulsions.The result indicated that ES-5300 is efficient in forming the homogeneous and stable W/O/W multi-structure emulsions which related to the emulsifier structure and low HLB value.Compared with other anionic emulsifier,sodium isostearoyl lactylate can product more stable multi-structure emulsions.However,the higher temperature stability was affected by the increasing of it.In addition,appropriate first phase volume ratio is critical to the stability of multi-structure emulsions.The multi-structure emulsions with better encapsulation efficiency and great performance in higher temperature was achieved when the first phase volume ratio equal to 1.
基金Supported by Henan Innovation Project for University Prominent Research Talents(2004KYCX010)~~
文摘[Objective] The properties of butachlor microemulsion were studied for developing a new formulation of new pesticides.[Method]AT method was used to determine the pseudo-ternary phase diagram to confirm the formulation of butachlor microemulsion.Through the measurement of electrical conductivity,the W/O and O/W types in microemulsion region of butachlor/emulsifier/water system were confirmed and the change of phase behavior during preparation process was discussed.[Result]The dilution stability,low temperature stability,heat stability,ageing stability,density and viscosity etc.of butachlor microemulsion met the requirement of the experiments,which demonstrated the qualified quality of butachlor.The density decreased linearly with the increase of temperature and the change of viscosity with temperature conformed to Andrade equation.[Conclusion]The research was helpful to the application of butachlor microemulsion in pesticide formulation.
基金supported by the Scientific Research Foundation of Health Department of Human Province(B2009-011)
文摘Objective:To explore the effect of emulsified isoflurane(EI)on apoptosis of anoxia-reoxygenation neonatal rat cardiomyocytea and relevant protein expression.Methods:Cardiac muscle anoxiareoxygenation damage model was established with culture in vitro neonatal rat cardiomyocytes.The cardiomyocytes were divided into control group,model group,fat emulsion group and EI group.The cardiomyocytes apoptosis rates and lactic dehydrogenase(LDH),superoxide dismutase(SOD)and malondialdehyde(MDA)index standardization were detected after relevant treatment The expression of apoptosis-related proteins Bel-2,Bax and Caspase-3 were detected with Western blot approach.Results:After hypoxia/reoxygenation(H/R)model was treated by EI,the cells apoptosis rate decreased and was dramatically below the fat emulsion group(P<0.05),Cardiomyocytes biochemical index detection presented that,compared with the control group that the LDH activity and MDA content dramatically increased(P<0.05),while the SOD activity notably decreased(P<0.05);compared with the H/R group,the SOD activity of the fat emulsion group and EI group increased(P<0.05);while the LDH activity and MDA content decreased(P<0.05).And the change of the EI group was more remarkable than the fat emulsion group(P<0.05).The Western blot analysis presented that,compared with the control group,the Bcl-2 protein expression of the other groups significantly decreased(P<0.05),the expressions of Bax protein and Caspase-3protein increased significantly(P<0.05);compared with H/R group,cardiomyocytes Bc1-2protein expression of EI group increased significantly(P<0.05),the expressions of Bax protein and Caspase-3 protein decreased significantly(P<0.05),and the change of EI group was more remarkable than the fat emulsion group(P<0.05).Conclusions:EI can inhabit the apoptosis of anoxia-reoxygenation damage model cardiomyocytes,and may he related to the up-regulation of expression of Bcl-2 and down-regulation of expression of Caspase-3 protein.
基金Projects(51708048,51704040)supported by the National Natural Science Foundation of ChinaProject(17C0050)supported by the Scientific Research Project of Hunan Provincial Department of Education for General Scholars,China+1 种基金Project(kfj160103)supported by the Open Fund of State Engineering Laboratory of Highway Maintenance Technology(Changsha University of Science&Technology),ChinaProject supported by the Open Fund of Guangxi Key Lab of Road Structure and Materials,China
文摘In order to study the application of gyratory compaction molding method in emulsified asphalt cold recycled mixture and optimize the relevant technical parameters, the study was carried out according to splitting strength, stability and water stability test;the design of the experiment involved changing gyration number, emulsified asphalt and water content, molded specimen temperature and other factors to analyze the volume parameters, mechanical properties and water stability. The results show that both the maximum dry density and dry and wet splitting strength ratio(DWSSR) of emulsified asphalt cold reclaimed mixture are improved by the rotary compacting method, while the porosity and the optimal dosage of water are reduced. Furthermore, with the increase of compaction times, the porosity and splitting strength index both change exponentially. DWSSR and porosity are consistent with quadratic functions. The use of gyratory compaction for 70 times at 25 °C and the optimum dosage of emulsified asphalt can be determined based on the splitting strength ratio. The high-temperature stability and water damage resistance of the pavement can be improved by the use of rotary compacting method effectively, and the early strength and road performance are higher than the regulatory requirements.
基金financially supported by grants from the Key Scientific Research Projects of Hubei Province(2020BCA086)the National Key Research and Development Program of China(2017YFD0400200)+3 种基金Wuhan Application Fundamental Frontier Project of China(2020020601012270)the National Natural Science Foundation of China(31771938)the China Agriculture Research System of MOF and MARAthe Wuhan Achievement Transformation Project(2019030703011505)。
文摘This study characterized and compared the physical and emulsifying properties of pea protein(PP)and its modified proteins(ultrasound treated-PP(PPU),flaxseed gum(FG)treated PP(PPFG)and ultrasound treated-PPFG(PPFGU)).The results showed FG triggered the formation of loosely attached complex with PP via physical modification under gentle magnetic stirring at pH 7.0,while ultrasound played an important role in reducing protein size,increasing surface hydrophobicity and molecular fluidity onto oil-water interface.So ultrasound further enhanced the interaction of PP with FG,and produced the PPFGU complex with smaller droplet size,higherζ-potential and lower turbidity.Further,combination of FG and ultrasound improved the physical properties of PP with higher viscosity,stiffer gels(defined as higher elastic modulus),stronger hydrophobic properties,better thermal stability,and fast protein absorption rate.Therefore,the PPFGU coarse emulsion performed highest emulsifying activity index(EAI)and emulsion stability index(ESI)that the stabilized nanoemulsion obtained smallest droplet size,higherζ-potential,and longest storage stability.The combination of FG and ultrasonic treatment will be an effective approach to improving the emulsifying property and thermal stability of PP,which can be considered as a potential plant-based emulsifier applied in the food industry.
基金This work was financially supported by the National Natural Science Foundation of China (No.50574004).
文摘The desensitization degree of emulsion explosives （EE） was calculated with the peak pressure of explosion shock waves tested in water. To an explosive, the less the desensitization degree, the better the compression resistance, so the compression resistance of an explosive can be compared and analyzed quantificationally with the desensitization degree. The influence of an emulsifier on the pressure desensitization of EE was studied, including the content and category of emulsifiers. Three kinds of emulsifiers （Span-80, compound emulsifier, and T-152） were used in the tests. The experimental results show that both the content and category of emulsifiers make a great effect on the pressure desensitization of EE. The desensitization degree of EE reduces with the emulsifier content being increased, but there is an optimal content of an emulsifier for the compression resistance of EE. While the content of Span-80 reaches 4wt%, the desensitization degree of EE becomes a minimal value, and augments somewhat if the emulsifier content is increased more. That is to say, the compression resistance of EE becomes the highest while the content of Span-80 is 4wt%, and the compression resistance will decline if the content of Span-80 is increased more. The compression resistance of the explosive emulsified by compound emulsifier is the highest among all the explosives, when the content of the whole components and manufacturing engineering are kept invariable.
文摘The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization. (c) 2007 Cheng You Kan. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金financially supported by the National Natural Science Foundation of China,No.81401279(to ZYY)the Natural Science Foundation of Shanghai,China,No.18ZR1443100(to ZYY)+2 种基金the Innovation Center of Translational Medicine Collaboration,Shanghai Jiao Tong University School of Medicine of China,No.TM201729(to ZYY)the Youth Talent Fund of International Peace Maternity and Child Health Hospital,Shanghai Jiao Tong University School of Medicine of China in 2014(to ZYY)the“WUXIN”Project of International Peace Maternity and Child Health Hospital,Shanghai Jiao Tong University School of Medicine of China in 2019,No.2018-38(to ZYY)。
文摘Autophagy plays essential roles in cell survival.However,the functions and regulation of the autophagy-related proteins Atg5,LC3B,and Beclin 1 during anesthetic-induced developmental neurotoxicity remain unclear.This study aimed to understand the autophagy pathways and mechanisms that affect neurotoxicity,induced by the anesthetic emulsified isoflurane,in rat fetal neural stem cells.Fetal neural stem cells were cultured,in vitro,and neurotoxicity was induced by emulsified isoflurane treatment.The effects of pretreatment with the autophagy inhibitors 3-methyladenine and bafilomycin and the effects of transfection with small interfering RNA against ATG5(siRNA-Atg5)were observed.Cell viability was determined using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay,and apoptosis was assessed using flow cytometry.Ultrastructural changes were analyzed through transmission electron microscopy.The levels of the autophagy-related proteins LC3B,Beclin 1,Atg5,and P62 and the pro-apoptosis-related protein caspase-3 were analyzed using western blot assay.The inhibition of cell proliferation and that of apoptosis rate increased after treatment with emulsified isoflurane.Autophagolysosomes,monolayer membrane formation due to lysosomal degradation,were observed.The autophagy-related proteins LC3B,Beclin 1,Atg5,and P62 and caspase-3 were upregulated.These results confirm that emulsified isoflurane can induce toxicity and autophagy in fetal neural stem cells.Pre-treatment with 3-methyladenine and bafilomycin increased the apoptosis rate in emulsified isoflurane-treated fetal neural stem cells,which indicated that the complete inhibition of autophagy does not alleviate emulsified isoflurane-induced fetal neural stem cell toxicity.Atg5 expression was decreased significantly by siRNA-Atg5 transfection,and cell proliferation was inhibited.These results verify that the Atg5 autophagy pathway can be regulated to maintain appropriate levels of autophagy,which can inhibit the neurotoxicity induced by emulsified isoflurane anesthetic in fetal neural stem cells.
基金Zhejiang Provincial Natural Science Foundation of China(No.Y4100152)
文摘The polyacrylate latexes were synthesized via pre-emulsified and semi-continuous seeded emulsion polymerization technology when conventional surfactant or polymerizable surfactant was used as emulsifiers. The resultant latexes and their films were characterized with the contact angle determinator and rheometer. Effect of the polymerizable surfactant on water resistance, stability and rheology of the latex was studied. Results show that the water resistance of film is increased first then decreased with the increase of the amount of the polymerizable surfactant. There exists the optimum value of the amount of the polymerizable surfactant for the water resistance of the film. In comparison with the latex prepared with the conventional surfactant, both the mechanical stability and the freezing-thaw stability of the latex are improved when the polymerizable surfactant is used during the course of the emulsion polymerization. The resultant latex has rheological properties of pseudo-plastic fluid and belongs to non-Newtonian fluid.
文摘The epoxy resin polymer cement mortars with excellent performances were made up through modifying ordinary Portland cement with emulsified epoxy and micro fine slag.The microstructure of the epoxy resin polymer cement materials was studied and their hydration and hardening characteristics were discussed by means of modern analysis measures such as SEM,XRD and Hg intrusion micromeritics.The experimental results indicate that the series effects of water reducing,density,pozzolanicity,filling and solidification crosslinking through the action together with epoxy organism and micro fine slag endowed cement based materials with perfect performances.The main hydration products in the system are C S H gel and hydrated calcium aluminate.At later age,AFt can be in existence,and no Ca(OH) 2 is found.When epoxy resin is solidified,the organism is in a network structure.In the micro pore structure of hydrated cement with modified epoxy and fine slag,big harmful pores were fewer,more harmless abundant micro pores were and the possible pore radius was smaller than that of ordinary Portland cement.
基金Project supported by the National Natural Science Foundation of China(No.51578472)。
文摘Under repeated train-induced loads, cement and emulsified asphalt mortar(CA mortar) as a viscoelastic material has a time-dependent deformation, part of which is irreversible. This could lead to debonding between the mortar layer and the track slab. Based on the theory of viscoelasticity and the analytical method of the time hardening law(THL), the viscoelastic deformation behavior of CA mortar was studied. Using ABAQUS, we established a solid model of China railway track system(CRTS) Ⅰ prefabricated slab track, with CA mortar at different initial Young’s moduli under cyclic loading corresponding to the influence of actual train loads. The results reveal that the fitted parameters of the THL for CA mortar are suitable for describing its viscoelastic deformation. As the initial Young’s modulus increases, the strain difference before and after cyclic loading gradually decreases, and the displacement difference increases from 0.2 mm to 0.6 mm. The deformation mainly occurs at the end of a mortar layer with longitudinal distribution of about 2.5 times the fasteners’ spacing. It follows that the viscoelastic performance of CA mortar is one of the most important reasons that cause debonding underneath the track slab. Therefore, we suggest that the adverse effects of viscoelastic behavior of CA mortar should be considered when researching such deformation and damage.
基金Supported by the Science Foundation for Post Doctorate of China （20060400629）.
文摘The microemulsified acid system composed by diesel oil, hydrochloric acid and emulsifier was investi- gated in this paper. The stability of microemulsified acid and the phase behavior of the microemulsified system Were studied. The size distribution and the corrosion inhibition performance were also observed. The results showed that the diesel oil microemulsified acid system possessed small size and good stability under different temperature.The tolerance to CaCl2 reached 80 g·L^-1. Compared with the same concentration hydrochloric acid solution, the corrosion inhibition performance of the diesel oil microemulsified acid system was remarkable.
基金supported from the Shanghai Association for Science and Technology Achievements Transformation Alliance Program(No.LM201851)the National Natural Science Foundation of China(Nos.21878188,21606151 and 21707092)+2 种基金Shanghai Excellent Technology Leaders Program(No.17XD1424900)"Chenguang Program"from Shanghai Education Development FoundationShanghai Municipal Education Commission(No.18CGB12)。
文摘In this study,various nonionic surfactants(NS) with different ethylene oxide(EO) numbers and tail lengths and its binary blends with anionic surfactants(AS) were used as emulsifiers for naphthenic oil to form the microemulsion metalworking fluids(MWFs),and the effects of them on the stability of the emulsion system were investigated by formulation triangle method.The results indicated that binary complex surfactants of NS and AS as emulsifiers exhibited better emulsifying effect than that of single NS.NS with different EO numbers and tail lengths presented various emulsifying effects.NS(EO=10)exhibited the greatest number of stable formulations,especially the TX-10,but no linear relationship existed between the number of stable formulations and the tail length of NS.In addition,aromatic primary alcohol ethoxy late(APAE) series surfactants containing benzene groups similar to the cycloalkanes in the naphthenic oil so that presented the best emulsifying affect and the greatest number of stable formulations.The co-surfactant of sodium dodecyl benzene sulfonate(SDBS) binary blends with NS exerted the best synergistic effect,and the stable formulations numbers were ranged from 5 to 7,next sodium stearate(SS) comes last followed by sodium dodecyl sulfate(SDS-1) and sodium dodecyl sulfonate(SDS-2).
