The Makran Sea is a complex marine environment.The purpose of this research is screening of emulsifier-producing bacteria in this marine environment and optimization of emulsifier production by the best-producing stra...The Makran Sea is a complex marine environment.The purpose of this research is screening of emulsifier-producing bacteria in this marine environment and optimization of emulsifier production by the best-producing strain.Marine samples(seawater and sediments)were collected from four different zones in the Makran Sea.The emulsification activity index(E_(24))and Bacterial Ad-hesion To Hydrocarbons(BATH)were used to select the best emulsifier-producing strains.The prevalent strains were identified by PCR.The optimization of the emulsifier production medium by the best strain was done by two-level factorial design.Seventeen emulsifier-producing strains were isolated from sediments and seawater in the Makran Sea.The strains M6,BS-2,and J6 were select-ed between all isolates because they have 83%,91%,and 85%emulsification activity(E_(24))respectively.The results of sequencing confirmed that these three strains(M6,BS-2,and J6)belong to Cobetia marina,Shewanella alga,and Thalassospira permensis re-spectively.Maximum emulsifier production occurred at crude oil concentration(4%,v/v),peptone(2.5 g/L),yeast extract(1.5 g/L),molasses(2%),and at a temperature of 25℃.The results of this research confirmed that the Makran Sea has the potential to reach ro-bust marine bacteria with different biotechnological applications.展开更多
Responsive nanocontainers have dual functions in targeted delivery of corrosion inhibitors and emulsion development of shale oil in oil and gas fields,exhibiting potential for simultaneously achieving metal protection...Responsive nanocontainers have dual functions in targeted delivery of corrosion inhibitors and emulsion development of shale oil in oil and gas fields,exhibiting potential for simultaneously achieving metal protection and efficient oil and gas development from a material perspective.Here,we propose the preparation of a pH-responsive nanocontainer,HMSNs-g-PDEAEMA(poly[2-(N,N-diethyl amino)ethyl-methacrylate](PDEAEMA)grafted onto hollow mesoporous spherical silica(HMSNs)),to integrate the delivery of 2-mercaptobenzothiazole(MBT)for targeted corrosion inhibition and the emulsification of oil as Pickering emulsifiers.Under acidic conditions(reduced pH value caused by localized corrosion or high concentration acidic gases),PDEAEMA chains are protonated and extended by electrostatic repulsion,exposing pores on HMSNs surface and allowing the controlled release of loaded MBT molecules.Once transforming into a neutral or alkaline environment,the responsive release of the MBT process is inhibited.After the fluid passes through the wellbore and enters the shale layer,the HMSNs-g-PDEAEMA nanocontainers act as Pickering emulsifiers to achieve emulsification.The emulsified oil can be extracted onto the ground more efficiently,and a following pH-responsive demulsification process can be achieved.Overall,through a pH-responsive nanocontainer material,the dual function of corrosion inhibition and emulsification in oil and gas development is possible to be simultaneously achieved.展开更多
W/O/W multi-structure emulsions were prepared by two-step method,to investigate the effect of different W/O emulsifier,anionic emulsifier as well as the first phase volume ratio on the formation and stability of multi...W/O/W multi-structure emulsions were prepared by two-step method,to investigate the effect of different W/O emulsifier,anionic emulsifier as well as the first phase volume ratio on the formation and stability of multi-structure emulsions.The result indicated that ES-5300 is efficient in forming the homogeneous and stable W/O/W multi-structure emulsions which related to the emulsifier structure and low HLB value.Compared with other anionic emulsifier,sodium isostearoyl lactylate can product more stable multi-structure emulsions.However,the higher temperature stability was affected by the increasing of it.In addition,appropriate first phase volume ratio is critical to the stability of multi-structure emulsions.The multi-structure emulsions with better encapsulation efficiency and great performance in higher temperature was achieved when the first phase volume ratio equal to 1.展开更多
The microemulsified acid system composed by diesel oil, hydrochloric acid and emulsifier was investi- gated in this paper. The stability of microemulsified acid and the phase behavior of the microemulsified system Wer...The microemulsified acid system composed by diesel oil, hydrochloric acid and emulsifier was investi- gated in this paper. The stability of microemulsified acid and the phase behavior of the microemulsified system Were studied. The size distribution and the corrosion inhibition performance were also observed. The results showed that the diesel oil microemulsified acid system possessed small size and good stability under different temperature.The tolerance to CaCl2 reached 80 g·L^-1. Compared with the same concentration hydrochloric acid solution, the corrosion inhibition performance of the diesel oil microemulsified acid system was remarkable.展开更多
Objective:To explore the effect of emulsified isoflurane(EI)on apoptosis of anoxia-reoxygenation neonatal rat cardiomyocytea and relevant protein expression.Methods:Cardiac muscle anoxiareoxygenation damage model was ...Objective:To explore the effect of emulsified isoflurane(EI)on apoptosis of anoxia-reoxygenation neonatal rat cardiomyocytea and relevant protein expression.Methods:Cardiac muscle anoxiareoxygenation damage model was established with culture in vitro neonatal rat cardiomyocytes.The cardiomyocytes were divided into control group,model group,fat emulsion group and EI group.The cardiomyocytes apoptosis rates and lactic dehydrogenase(LDH),superoxide dismutase(SOD)and malondialdehyde(MDA)index standardization were detected after relevant treatment The expression of apoptosis-related proteins Bel-2,Bax and Caspase-3 were detected with Western blot approach.Results:After hypoxia/reoxygenation(H/R)model was treated by EI,the cells apoptosis rate decreased and was dramatically below the fat emulsion group(P<0.05),Cardiomyocytes biochemical index detection presented that,compared with the control group that the LDH activity and MDA content dramatically increased(P<0.05),while the SOD activity notably decreased(P<0.05);compared with the H/R group,the SOD activity of the fat emulsion group and EI group increased(P<0.05);while the LDH activity and MDA content decreased(P<0.05).And the change of the EI group was more remarkable than the fat emulsion group(P<0.05).The Western blot analysis presented that,compared with the control group,the Bcl-2 protein expression of the other groups significantly decreased(P<0.05),the expressions of Bax protein and Caspase-3protein increased significantly(P<0.05);compared with H/R group,cardiomyocytes Bc1-2protein expression of EI group increased significantly(P<0.05),the expressions of Bax protein and Caspase-3 protein decreased significantly(P<0.05),and the change of EI group was more remarkable than the fat emulsion group(P<0.05).Conclusions:EI can inhabit the apoptosis of anoxia-reoxygenation damage model cardiomyocytes,and may he related to the up-regulation of expression of Bcl-2 and down-regulation of expression of Caspase-3 protein.展开更多
In order to study the application of gyratory compaction molding method in emulsified asphalt cold recycled mixture and optimize the relevant technical parameters, the study was carried out according to splitting stre...In order to study the application of gyratory compaction molding method in emulsified asphalt cold recycled mixture and optimize the relevant technical parameters, the study was carried out according to splitting strength, stability and water stability test;the design of the experiment involved changing gyration number, emulsified asphalt and water content, molded specimen temperature and other factors to analyze the volume parameters, mechanical properties and water stability. The results show that both the maximum dry density and dry and wet splitting strength ratio(DWSSR) of emulsified asphalt cold reclaimed mixture are improved by the rotary compacting method, while the porosity and the optimal dosage of water are reduced. Furthermore, with the increase of compaction times, the porosity and splitting strength index both change exponentially. DWSSR and porosity are consistent with quadratic functions. The use of gyratory compaction for 70 times at 25 °C and the optimum dosage of emulsified asphalt can be determined based on the splitting strength ratio. The high-temperature stability and water damage resistance of the pavement can be improved by the use of rotary compacting method effectively, and the early strength and road performance are higher than the regulatory requirements.展开更多
The desensitization degree of emulsion explosives （EE） was calculated with the peak pressure of explosion shock waves tested in water. To an explosive, the less the desensitization degree, the better the compression...The desensitization degree of emulsion explosives （EE） was calculated with the peak pressure of explosion shock waves tested in water. To an explosive, the less the desensitization degree, the better the compression resistance, so the compression resistance of an explosive can be compared and analyzed quantificationally with the desensitization degree. The influence of an emulsifier on the pressure desensitization of EE was studied, including the content and category of emulsifiers. Three kinds of emulsifiers （Span-80, compound emulsifier, and T-152） were used in the tests. The experimental results show that both the content and category of emulsifiers make a great effect on the pressure desensitization of EE. The desensitization degree of EE reduces with the emulsifier content being increased, but there is an optimal content of an emulsifier for the compression resistance of EE. While the content of Span-80 reaches 4wt%, the desensitization degree of EE becomes a minimal value, and augments somewhat if the emulsifier content is increased more. That is to say, the compression resistance of EE becomes the highest while the content of Span-80 is 4wt%, and the compression resistance will decline if the content of Span-80 is increased more. The compression resistance of the explosive emulsified by compound emulsifier is the highest among all the explosives, when the content of the whole components and manufacturing engineering are kept invariable.展开更多
The epoxy resin polymer cement mortars with excellent performances were made up through modifying ordinary Portland cement with emulsified epoxy and micro fine slag.The microstructure of the epoxy resin polymer cemen...The epoxy resin polymer cement mortars with excellent performances were made up through modifying ordinary Portland cement with emulsified epoxy and micro fine slag.The microstructure of the epoxy resin polymer cement materials was studied and their hydration and hardening characteristics were discussed by means of modern analysis measures such as SEM,XRD and Hg intrusion micromeritics.The experimental results indicate that the series effects of water reducing,density,pozzolanicity,filling and solidification crosslinking through the action together with epoxy organism and micro fine slag endowed cement based materials with perfect performances.The main hydration products in the system are C S H gel and hydrated calcium aluminate.At later age,AFt can be in existence,and no Ca(OH) 2 is found.When epoxy resin is solidified,the organism is in a network structure.In the micro pore structure of hydrated cement with modified epoxy and fine slag,big harmful pores were fewer,more harmless abundant micro pores were and the possible pore radius was smaller than that of ordinary Portland cement.展开更多
The polyacrylate latexes were synthesized via pre-emulsified and semi-continuous seeded emulsion polymerization technology when conventional surfactant or polymerizable surfactant was used as emulsifiers. The resultan...The polyacrylate latexes were synthesized via pre-emulsified and semi-continuous seeded emulsion polymerization technology when conventional surfactant or polymerizable surfactant was used as emulsifiers. The resultant latexes and their films were characterized with the contact angle determinator and rheometer. Effect of the polymerizable surfactant on water resistance, stability and rheology of the latex was studied. Results show that the water resistance of film is increased first then decreased with the increase of the amount of the polymerizable surfactant. There exists the optimum value of the amount of the polymerizable surfactant for the water resistance of the film. In comparison with the latex prepared with the conventional surfactant, both the mechanical stability and the freezing-thaw stability of the latex are improved when the polymerizable surfactant is used during the course of the emulsion polymerization. The resultant latex has rheological properties of pseudo-plastic fluid and belongs to non-Newtonian fluid.展开更多
Autophagy plays essential roles in cell survival.However,the functions and regulation of the autophagy-related proteins Atg5,LC3B,and Beclin 1 during anesthetic-induced developmental neurotoxicity remain unclear.This ...Autophagy plays essential roles in cell survival.However,the functions and regulation of the autophagy-related proteins Atg5,LC3B,and Beclin 1 during anesthetic-induced developmental neurotoxicity remain unclear.This study aimed to understand the autophagy pathways and mechanisms that affect neurotoxicity,induced by the anesthetic emulsified isoflurane,in rat fetal neural stem cells.Fetal neural stem cells were cultured,in vitro,and neurotoxicity was induced by emulsified isoflurane treatment.The effects of pretreatment with the autophagy inhibitors 3-methyladenine and bafilomycin and the effects of transfection with small interfering RNA against ATG5(siRNA-Atg5)were observed.Cell viability was determined using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay,and apoptosis was assessed using flow cytometry.Ultrastructural changes were analyzed through transmission electron microscopy.The levels of the autophagy-related proteins LC3B,Beclin 1,Atg5,and P62 and the pro-apoptosis-related protein caspase-3 were analyzed using western blot assay.The inhibition of cell proliferation and that of apoptosis rate increased after treatment with emulsified isoflurane.Autophagolysosomes,monolayer membrane formation due to lysosomal degradation,were observed.The autophagy-related proteins LC3B,Beclin 1,Atg5,and P62 and caspase-3 were upregulated.These results confirm that emulsified isoflurane can induce toxicity and autophagy in fetal neural stem cells.Pre-treatment with 3-methyladenine and bafilomycin increased the apoptosis rate in emulsified isoflurane-treated fetal neural stem cells,which indicated that the complete inhibition of autophagy does not alleviate emulsified isoflurane-induced fetal neural stem cell toxicity.Atg5 expression was decreased significantly by siRNA-Atg5 transfection,and cell proliferation was inhibited.These results verify that the Atg5 autophagy pathway can be regulated to maintain appropriate levels of autophagy,which can inhibit the neurotoxicity induced by emulsified isoflurane anesthetic in fetal neural stem cells.展开更多
Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relation...Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relations between rheology and structural properties of typical emulsifiers were analyzed. Experimental results show that viscosity of emulsifiers didn＇ t change with shear rate at room temperature and appeared properties of Newtonian fluid. Viscosity of different component emulsifiers declines with temperature in different modes. The change of strain doesn＇ t affect modu- lus of emulsifiers. Loss modulus increases linearly with the increase of frequency in oscillation and storage modulus does non-linearly. The higher the temperature is, the lower change amplitude of loss modulus with frequency will be. The emulsifiers with imide and amide functionality for emulsion explosives have better shear properties at high temperature and better shapingness and stability at room temperature than other emulsifiers with ester and Sorbin Monoleate （SMO） functionality.展开更多
The slurry scaling with cationic emulsified asphalt, which is a new technique in highway construction, is rapidly extended at home and abroad. The technique should apply an excellent slow set cationic cmulsincr. Now, ...The slurry scaling with cationic emulsified asphalt, which is a new technique in highway construction, is rapidly extended at home and abroad. The technique should apply an excellent slow set cationic cmulsincr. Now, slow set emulsificrs are ligninamines which are synthesized by trimethylamine-epichlorohydrin route. Owing to high price and unstable quality, the extending of slurry sealing technique is affected seriously. We prepare the ligninaminc by a novel synthetic method. By the novel method, the cost of production is reduced by more than 30%, and the products have stable quality, high emulsifying function and broad adaptability for various asphalts. The novel synthetic method uses soda lignin, secondary amines and inexpensive aminating assistants as raw materials. The technological process of the method may use either one or two-step process, and the technological condition arc uncomplicated and easy to master.展开更多
Under repeated train-induced loads, cement and emulsified asphalt mortar(CA mortar) as a viscoelastic material has a time-dependent deformation, part of which is irreversible. This could lead to debonding between the ...Under repeated train-induced loads, cement and emulsified asphalt mortar(CA mortar) as a viscoelastic material has a time-dependent deformation, part of which is irreversible. This could lead to debonding between the mortar layer and the track slab. Based on the theory of viscoelasticity and the analytical method of the time hardening law(THL), the viscoelastic deformation behavior of CA mortar was studied. Using ABAQUS, we established a solid model of China railway track system(CRTS) Ⅰ prefabricated slab track, with CA mortar at different initial Young’s moduli under cyclic loading corresponding to the influence of actual train loads. The results reveal that the fitted parameters of the THL for CA mortar are suitable for describing its viscoelastic deformation. As the initial Young’s modulus increases, the strain difference before and after cyclic loading gradually decreases, and the displacement difference increases from 0.2 mm to 0.6 mm. The deformation mainly occurs at the end of a mortar layer with longitudinal distribution of about 2.5 times the fasteners’ spacing. It follows that the viscoelastic performance of CA mortar is one of the most important reasons that cause debonding underneath the track slab. Therefore, we suggest that the adverse effects of viscoelastic behavior of CA mortar should be considered when researching such deformation and damage.展开更多
Surfactant food emulsifiers are among the most extensively used food additives.Like all authorized food additives,emulsifiers have been evaluated by risk assessors,who consider them as safe.However,there are growing c...Surfactant food emulsifiers are among the most extensively used food additives.Like all authorized food additives,emulsifiers have been evaluated by risk assessors,who consider them as safe.However,there are growing concerns among scientists about their possible harmful effects on intestinal barriers and microbiota.It is also suggested that emulsifier consumption might be one of the main causes of the rising incidence of a number of diseases,such as allergic diseases,celiac disease,type I diabetes and Crohn’s disease.Moreover,it has recently been suggested that emulsifier consumption might contribute to the development of metabolic syndrome and can promote colitis-associated colorectal cancer also.This paper provides an overview of the current scientific knowledge on possible effects of surfactant emulsifiers on intestinal barriers and also of regulatory risk assessment approaches.Our main objective is to reveal the reasons for the discrepancies between the opinions of risk assessors and the scientific world.We would like to draw the attention of the academic world to the need of specific in vivo and/or clinical studies for each emulsifier in order to help risk assessors make adequate evaluations and rule out with certainty that authorized food emulsifiers pose a safety concern to consumers’health.展开更多
The oil-in-water emulsion drilling fluids, prepared by adding 5～12% (by volume) of mineral oil (or diesel) to water-based muds, have been widely used for stuck-pipe prevention in the Shengli Oilfield. In some cases, ...The oil-in-water emulsion drilling fluids, prepared by adding 5～12% (by volume) of mineral oil (or diesel) to water-based muds, have been widely used for stuck-pipe prevention in the Shengli Oilfield. In some cases, the emulsion stability of this kind of mud system is not strong enough to meet the requirements of drilling operations. To overcome this drawback, a solid emulsifier, which is characterized by its very small particle size and special wetting behavior (slightly water-wet), has been developed and successfully applied to improve the emulsion stability and other performances of these drilling fluids. Prior to the development of this technology, an extensive study was conducted to deal with the influence of various kinds of finely divided insoluble solid particles on oil/water emulsification. The substances used include bentonite, organophilic clay, kaolinite, barite, two kinds of calcium carbonate with different particle sizes, two kinds of silica with different wetting behaviors, and a newly developed solid emulsifier. Both the emulsion stability experiments and the drop coalescence experiments are performed to evaluate the contribution of these particles to emulsification. The measured final emulsion volume disappears after 12 hours and the half-life for water and oil drops are used as the measures of emulsion stability. The experimental data show that the type, size, concentration and wettability of the particles, and the presence of some surfactants control the type and stability of emulsions for a given oil/water system, and the fine particles of the solids emulsifier provide the most effective stabilization for water-continuous emulsions compared with other kinds of particles. Meanwhile, it can be observed that these particles also stabilize oil-continuous emulsions effectively in some cases since their wetting behavior is close to neutral. The O/W emulsion mud stabilized by the newly developed solid emulsifier has become one of the major mud systems used in directional and horizontal well drilling in the Shengli Oilfield. In addition to the improvement of emulsion stability, this solid emulsifier has the advantages of improving the lubricity of mud cake and is beneficial to the control of rheological properties and filtration.展开更多
Whole wheat bread is widely available worldwide,but it is always associated with less desirable dough processibility,small loaf volume,firm and gritty texture,and other distinctive attributes compared to white bread.E...Whole wheat bread is widely available worldwide,but it is always associated with less desirable dough processibility,small loaf volume,firm and gritty texture,and other distinctive attributes compared to white bread.Emulsifiers are commonly used to improve dough handling and baking quality during bread production.In present study,five emulsifiers(diacetyl tartaric acid esters of mono-and diglycerides(DATEM),polysorbate 80,sodium stearoyl lactylate(SSL),soy lecithin,and sucrose esters)were added during dough preparation of the whole wheat flour at 0.2%,0.5%,and 1.0%(flour weight basis).Dough rheological behavior and bread quality attributes,such as specific loaf volume and hardness,were measured.The results showed that DATEM,sucrose esters,and SSL increased the resistance to extension of the dough,whereas soy lecithin and polysorbate 80 increased the extensibility.Soy lecithin and polysorbate 80 were the only emulsifiers that significantly increased loaf volume compared to the control.Adding higher levels(1.0%)of sucrose esters,polysorbate 80,and SSL increased the formation of amylose-lipid complex and mitigate the crumb staling during storage.The results suggested that the emulsifiers could be applied to contribute to optimum functional quality of whole wheat bread.展开更多
Widespread contamination by nitrobenzene（NB） in sediments and groundwater requires better understanding of the biogeochemical removal process of the pollutant. NB degradation, coupled with dissimilatory iron reducti...Widespread contamination by nitrobenzene（NB） in sediments and groundwater requires better understanding of the biogeochemical removal process of the pollutant. NB degradation, coupled with dissimilatory iron reduction, is one of the most efficient pollutant removal methods. However, research on NB degradation coupled to indigenous microorganism dissimilatory iron reduction stimulated by electron donors is still experimental. A model for remediation in an actual polluted site does not currently exist.Therefore, in this study, the dynamics was derived from the Michaelis–Menten model（when the mass ratio of emulsified vegetable oil and NB reached the critical value 91：1）. The effect of SO4^（2-）, NO3^-, Ca^（2＋）/Mg^（2＋）, and the grain size of aquifer media on the dynamics were studied, and the NB degradation dynamic model was then modified based on the most significant factors. Utilizing the model, the remediation time could be calculated in a contaminated site.展开更多
In recent years,with the improvement of the requirements of road performance,modified emulsified asphalts with better performance has gradually replaced the emulsified asphalt and become the primary material for road ...In recent years,with the improvement of the requirements of road performance,modified emulsified asphalts with better performance has gradually replaced the emulsified asphalt and become the primary material for road maintenance.This paper introduces the modified emulsified asphalt materials commonly used in pavement maintenance projects,definitions and modified mechanisms of polymerized styrene butadiene rubber(SBR)modified emulsified asphalt,styrene butadiene styrene block polymer(SBS)modified emulsified asphalt and waterborne epoxy resin(WER)modified emulsified asphalt are summarized.The analysis focused on comparing the effects of modifiers,preparation process,auxiliary additives,and other factors on the performance of modified emulsified asphalt.In this paper,it is considered that the greatest impact on the performance of emulsified asphalt is the modifier,emulsifier mainly affects the speed of breaking the emulsion,stabilizers on the basic performance of emulsified asphalt evaporative residue is small;and when the modifier is distributed in the asphalt in a network,the dosage at this time is the recommended optimum dosage.Finally,this study recommends that in the future,the polymer-asphalt compatibility can be improved through composite modification,chemical grafting and other methods to continue to develop broader applicability and better performance of modified emulsified asphalt.展开更多
Synthetic Aperture Radar(SAR) plays a major role in identifying oil spills on the sea surface.However,obtaining information of oil spill thickness(volume) is still a challenge.Emulsification is an important process af...Synthetic Aperture Radar(SAR) plays a major role in identifying oil spills on the sea surface.However,obtaining information of oil spill thickness(volume) is still a challenge.Emulsification is an important process affecting the thickness and normalized radar cross section(NRCS) of oil film.Experiments of crude oil emulsification with C-band fully-polarized scatterometer were conducted combining airborne hyperspectral imaging spectrometer and 3 D laser scanner observation data,to provide experimental parameters and method to support accurate remote sensing monitoring on marine oil spill.It is further proved that through quantitative homogeneous emulsified oil spill experiments,to a certain extent,the NRCS of oil film increased during the emulsification process of crude oil.The backscattering mechanism of crude oil emulsification was explored using a semi-empirical model(SEM);the change of oil film NRCS was modulated by its dielectric constant and surface roughness,in which the dielectric constant showed a dominant effect.The relationship between thickness and NRCS of oil film was studied under two experimental conditions.The differences of NRCS between oil film and adjacent seawater(Δσ~0) and the damping ratio(DR) were found to have a linear relationship with oil thickness,which were best in the vertical polarization mode(VV) at 45° incident angle during the quantitative crude oil homogeneous emulsification process.In the natural emulsification process of continuous oil spill in which oil film was mixed with both crude oil and emulsified oil,an empirical equation of oil film thickness is preliminarily established.The Δσ~0,DR,and the empirical equation of oil film thickness were applied to the marine continuous oil spill incident on a 19-3 oil platform with spaceborne SAR image and successfully explained the distribution of the relative thickness of the oil film.展开更多
Corn cob is a naturally renewable material with developed micropore and hydrophobic characteristics, which enables it to show good oil adsorption capacity. In order to improve oil adsorption capacity, corn cob was mod...Corn cob is a naturally renewable material with developed micropore and hydrophobic characteristics, which enables it to show good oil adsorption capacity. In order to improve oil adsorption capacity, corn cob was modified with lauric acid and ethanediol. The structure of raw and modified corn cob was investigated using Fourier transform infrared(FTIR) spectroscopy, scanning electron microscopy(SEM), Brunauer-Emmett-Teller(BET) method, thermogravimetric analysis(TGA) and Ze Ta potential analyzer. The effects of p H level, adsorption time, adsorbent dosage, and initial oil concentration on oil absorbency of corn cob were studied. The results indicate that the modification significantly improved the lipophilicity of corn cob, making the modified corn cob with much better adsorption capacity on oil absorbency. Compared with raw corn cob, the maximum saturated adsorption capacity of modified corn cob is 16.52 mg/g at p H 5, and the increasing percentage is found to be 141%, which indicates that the modification causes a better adsorption capacity for oil removal. In addition, due to high oil adsorption capacity, affordable price and low secondary pollution, the modified corn cob could be considered promising alternative for the traditional oil adsorbent to clean up the emulsified oily water.展开更多
基金supported by Shahid Bahonar Universi-ty of Kerman.
文摘The Makran Sea is a complex marine environment.The purpose of this research is screening of emulsifier-producing bacteria in this marine environment and optimization of emulsifier production by the best-producing strain.Marine samples(seawater and sediments)were collected from four different zones in the Makran Sea.The emulsification activity index(E_(24))and Bacterial Ad-hesion To Hydrocarbons(BATH)were used to select the best emulsifier-producing strains.The prevalent strains were identified by PCR.The optimization of the emulsifier production medium by the best strain was done by two-level factorial design.Seventeen emulsifier-producing strains were isolated from sediments and seawater in the Makran Sea.The strains M6,BS-2,and J6 were select-ed between all isolates because they have 83%,91%,and 85%emulsification activity(E_(24))respectively.The results of sequencing confirmed that these three strains(M6,BS-2,and J6)belong to Cobetia marina,Shewanella alga,and Thalassospira permensis re-spectively.Maximum emulsifier production occurred at crude oil concentration(4%,v/v),peptone(2.5 g/L),yeast extract(1.5 g/L),molasses(2%),and at a temperature of 25℃.The results of this research confirmed that the Makran Sea has the potential to reach ro-bust marine bacteria with different biotechnological applications.
基金financially supported by the National Natu-ral Science Foundation of China(Nos.52204066 and 52474020)the Shandong Province Youth Entrepreneurship Technology Sup-port Program for Higher Education Institutions(No.2023KJ060)the Fundamental Research Funds for the Central Universities(No.23CX06018A).
文摘Responsive nanocontainers have dual functions in targeted delivery of corrosion inhibitors and emulsion development of shale oil in oil and gas fields,exhibiting potential for simultaneously achieving metal protection and efficient oil and gas development from a material perspective.Here,we propose the preparation of a pH-responsive nanocontainer,HMSNs-g-PDEAEMA(poly[2-(N,N-diethyl amino)ethyl-methacrylate](PDEAEMA)grafted onto hollow mesoporous spherical silica(HMSNs)),to integrate the delivery of 2-mercaptobenzothiazole(MBT)for targeted corrosion inhibition and the emulsification of oil as Pickering emulsifiers.Under acidic conditions(reduced pH value caused by localized corrosion or high concentration acidic gases),PDEAEMA chains are protonated and extended by electrostatic repulsion,exposing pores on HMSNs surface and allowing the controlled release of loaded MBT molecules.Once transforming into a neutral or alkaline environment,the responsive release of the MBT process is inhibited.After the fluid passes through the wellbore and enters the shale layer,the HMSNs-g-PDEAEMA nanocontainers act as Pickering emulsifiers to achieve emulsification.The emulsified oil can be extracted onto the ground more efficiently,and a following pH-responsive demulsification process can be achieved.Overall,through a pH-responsive nanocontainer material,the dual function of corrosion inhibition and emulsification in oil and gas development is possible to be simultaneously achieved.
文摘W/O/W multi-structure emulsions were prepared by two-step method,to investigate the effect of different W/O emulsifier,anionic emulsifier as well as the first phase volume ratio on the formation and stability of multi-structure emulsions.The result indicated that ES-5300 is efficient in forming the homogeneous and stable W/O/W multi-structure emulsions which related to the emulsifier structure and low HLB value.Compared with other anionic emulsifier,sodium isostearoyl lactylate can product more stable multi-structure emulsions.However,the higher temperature stability was affected by the increasing of it.In addition,appropriate first phase volume ratio is critical to the stability of multi-structure emulsions.The multi-structure emulsions with better encapsulation efficiency and great performance in higher temperature was achieved when the first phase volume ratio equal to 1.
基金Supported by the Science Foundation for Post Doctorate of China （20060400629）.
文摘The microemulsified acid system composed by diesel oil, hydrochloric acid and emulsifier was investi- gated in this paper. The stability of microemulsified acid and the phase behavior of the microemulsified system Were studied. The size distribution and the corrosion inhibition performance were also observed. The results showed that the diesel oil microemulsified acid system possessed small size and good stability under different temperature.The tolerance to CaCl2 reached 80 g·L^-1. Compared with the same concentration hydrochloric acid solution, the corrosion inhibition performance of the diesel oil microemulsified acid system was remarkable.
基金supported by the Scientific Research Foundation of Health Department of Human Province(B2009-011)
文摘Objective:To explore the effect of emulsified isoflurane(EI)on apoptosis of anoxia-reoxygenation neonatal rat cardiomyocytea and relevant protein expression.Methods:Cardiac muscle anoxiareoxygenation damage model was established with culture in vitro neonatal rat cardiomyocytes.The cardiomyocytes were divided into control group,model group,fat emulsion group and EI group.The cardiomyocytes apoptosis rates and lactic dehydrogenase(LDH),superoxide dismutase(SOD)and malondialdehyde(MDA)index standardization were detected after relevant treatment The expression of apoptosis-related proteins Bel-2,Bax and Caspase-3 were detected with Western blot approach.Results:After hypoxia/reoxygenation(H/R)model was treated by EI,the cells apoptosis rate decreased and was dramatically below the fat emulsion group(P<0.05),Cardiomyocytes biochemical index detection presented that,compared with the control group that the LDH activity and MDA content dramatically increased(P<0.05),while the SOD activity notably decreased(P<0.05);compared with the H/R group,the SOD activity of the fat emulsion group and EI group increased(P<0.05);while the LDH activity and MDA content decreased(P<0.05).And the change of the EI group was more remarkable than the fat emulsion group(P<0.05).The Western blot analysis presented that,compared with the control group,the Bcl-2 protein expression of the other groups significantly decreased(P<0.05),the expressions of Bax protein and Caspase-3protein increased significantly(P<0.05);compared with H/R group,cardiomyocytes Bc1-2protein expression of EI group increased significantly(P<0.05),the expressions of Bax protein and Caspase-3 protein decreased significantly(P<0.05),and the change of EI group was more remarkable than the fat emulsion group(P<0.05).Conclusions:EI can inhabit the apoptosis of anoxia-reoxygenation damage model cardiomyocytes,and may he related to the up-regulation of expression of Bcl-2 and down-regulation of expression of Caspase-3 protein.
基金Projects(51708048,51704040)supported by the National Natural Science Foundation of ChinaProject(17C0050)supported by the Scientific Research Project of Hunan Provincial Department of Education for General Scholars,China+1 种基金Project(kfj160103)supported by the Open Fund of State Engineering Laboratory of Highway Maintenance Technology(Changsha University of Science&Technology),ChinaProject supported by the Open Fund of Guangxi Key Lab of Road Structure and Materials,China
文摘In order to study the application of gyratory compaction molding method in emulsified asphalt cold recycled mixture and optimize the relevant technical parameters, the study was carried out according to splitting strength, stability and water stability test;the design of the experiment involved changing gyration number, emulsified asphalt and water content, molded specimen temperature and other factors to analyze the volume parameters, mechanical properties and water stability. The results show that both the maximum dry density and dry and wet splitting strength ratio(DWSSR) of emulsified asphalt cold reclaimed mixture are improved by the rotary compacting method, while the porosity and the optimal dosage of water are reduced. Furthermore, with the increase of compaction times, the porosity and splitting strength index both change exponentially. DWSSR and porosity are consistent with quadratic functions. The use of gyratory compaction for 70 times at 25 °C and the optimum dosage of emulsified asphalt can be determined based on the splitting strength ratio. The high-temperature stability and water damage resistance of the pavement can be improved by the use of rotary compacting method effectively, and the early strength and road performance are higher than the regulatory requirements.
基金This work was financially supported by the National Natural Science Foundation of China (No.50574004).
文摘The desensitization degree of emulsion explosives （EE） was calculated with the peak pressure of explosion shock waves tested in water. To an explosive, the less the desensitization degree, the better the compression resistance, so the compression resistance of an explosive can be compared and analyzed quantificationally with the desensitization degree. The influence of an emulsifier on the pressure desensitization of EE was studied, including the content and category of emulsifiers. Three kinds of emulsifiers （Span-80, compound emulsifier, and T-152） were used in the tests. The experimental results show that both the content and category of emulsifiers make a great effect on the pressure desensitization of EE. The desensitization degree of EE reduces with the emulsifier content being increased, but there is an optimal content of an emulsifier for the compression resistance of EE. While the content of Span-80 reaches 4wt%, the desensitization degree of EE becomes a minimal value, and augments somewhat if the emulsifier content is increased more. That is to say, the compression resistance of EE becomes the highest while the content of Span-80 is 4wt%, and the compression resistance will decline if the content of Span-80 is increased more. The compression resistance of the explosive emulsified by compound emulsifier is the highest among all the explosives, when the content of the whole components and manufacturing engineering are kept invariable.
文摘The epoxy resin polymer cement mortars with excellent performances were made up through modifying ordinary Portland cement with emulsified epoxy and micro fine slag.The microstructure of the epoxy resin polymer cement materials was studied and their hydration and hardening characteristics were discussed by means of modern analysis measures such as SEM,XRD and Hg intrusion micromeritics.The experimental results indicate that the series effects of water reducing,density,pozzolanicity,filling and solidification crosslinking through the action together with epoxy organism and micro fine slag endowed cement based materials with perfect performances.The main hydration products in the system are C S H gel and hydrated calcium aluminate.At later age,AFt can be in existence,and no Ca(OH) 2 is found.When epoxy resin is solidified,the organism is in a network structure.In the micro pore structure of hydrated cement with modified epoxy and fine slag,big harmful pores were fewer,more harmless abundant micro pores were and the possible pore radius was smaller than that of ordinary Portland cement.
基金Zhejiang Provincial Natural Science Foundation of China(No.Y4100152)
文摘The polyacrylate latexes were synthesized via pre-emulsified and semi-continuous seeded emulsion polymerization technology when conventional surfactant or polymerizable surfactant was used as emulsifiers. The resultant latexes and their films were characterized with the contact angle determinator and rheometer. Effect of the polymerizable surfactant on water resistance, stability and rheology of the latex was studied. Results show that the water resistance of film is increased first then decreased with the increase of the amount of the polymerizable surfactant. There exists the optimum value of the amount of the polymerizable surfactant for the water resistance of the film. In comparison with the latex prepared with the conventional surfactant, both the mechanical stability and the freezing-thaw stability of the latex are improved when the polymerizable surfactant is used during the course of the emulsion polymerization. The resultant latex has rheological properties of pseudo-plastic fluid and belongs to non-Newtonian fluid.
基金financially supported by the National Natural Science Foundation of China,No.81401279(to ZYY)the Natural Science Foundation of Shanghai,China,No.18ZR1443100(to ZYY)+2 种基金the Innovation Center of Translational Medicine Collaboration,Shanghai Jiao Tong University School of Medicine of China,No.TM201729(to ZYY)the Youth Talent Fund of International Peace Maternity and Child Health Hospital,Shanghai Jiao Tong University School of Medicine of China in 2014(to ZYY)the“WUXIN”Project of International Peace Maternity and Child Health Hospital,Shanghai Jiao Tong University School of Medicine of China in 2019,No.2018-38(to ZYY)。
文摘Autophagy plays essential roles in cell survival.However,the functions and regulation of the autophagy-related proteins Atg5,LC3B,and Beclin 1 during anesthetic-induced developmental neurotoxicity remain unclear.This study aimed to understand the autophagy pathways and mechanisms that affect neurotoxicity,induced by the anesthetic emulsified isoflurane,in rat fetal neural stem cells.Fetal neural stem cells were cultured,in vitro,and neurotoxicity was induced by emulsified isoflurane treatment.The effects of pretreatment with the autophagy inhibitors 3-methyladenine and bafilomycin and the effects of transfection with small interfering RNA against ATG5(siRNA-Atg5)were observed.Cell viability was determined using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay,and apoptosis was assessed using flow cytometry.Ultrastructural changes were analyzed through transmission electron microscopy.The levels of the autophagy-related proteins LC3B,Beclin 1,Atg5,and P62 and the pro-apoptosis-related protein caspase-3 were analyzed using western blot assay.The inhibition of cell proliferation and that of apoptosis rate increased after treatment with emulsified isoflurane.Autophagolysosomes,monolayer membrane formation due to lysosomal degradation,were observed.The autophagy-related proteins LC3B,Beclin 1,Atg5,and P62 and caspase-3 were upregulated.These results confirm that emulsified isoflurane can induce toxicity and autophagy in fetal neural stem cells.Pre-treatment with 3-methyladenine and bafilomycin increased the apoptosis rate in emulsified isoflurane-treated fetal neural stem cells,which indicated that the complete inhibition of autophagy does not alleviate emulsified isoflurane-induced fetal neural stem cell toxicity.Atg5 expression was decreased significantly by siRNA-Atg5 transfection,and cell proliferation was inhibited.These results verify that the Atg5 autophagy pathway can be regulated to maintain appropriate levels of autophagy,which can inhibit the neurotoxicity induced by emulsified isoflurane anesthetic in fetal neural stem cells.
基金Supported by Independent Research Projects of State Key Laboratory of Explosion Science and Technology(ZDKT08-05)
文摘Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relations between rheology and structural properties of typical emulsifiers were analyzed. Experimental results show that viscosity of emulsifiers didn＇ t change with shear rate at room temperature and appeared properties of Newtonian fluid. Viscosity of different component emulsifiers declines with temperature in different modes. The change of strain doesn＇ t affect modu- lus of emulsifiers. Loss modulus increases linearly with the increase of frequency in oscillation and storage modulus does non-linearly. The higher the temperature is, the lower change amplitude of loss modulus with frequency will be. The emulsifiers with imide and amide functionality for emulsion explosives have better shear properties at high temperature and better shapingness and stability at room temperature than other emulsifiers with ester and Sorbin Monoleate （SMO） functionality.
文摘The slurry scaling with cationic emulsified asphalt, which is a new technique in highway construction, is rapidly extended at home and abroad. The technique should apply an excellent slow set cationic cmulsincr. Now, slow set emulsificrs are ligninamines which are synthesized by trimethylamine-epichlorohydrin route. Owing to high price and unstable quality, the extending of slurry sealing technique is affected seriously. We prepare the ligninaminc by a novel synthetic method. By the novel method, the cost of production is reduced by more than 30%, and the products have stable quality, high emulsifying function and broad adaptability for various asphalts. The novel synthetic method uses soda lignin, secondary amines and inexpensive aminating assistants as raw materials. The technological process of the method may use either one or two-step process, and the technological condition arc uncomplicated and easy to master.
基金Project supported by the National Natural Science Foundation of China(No.51578472)。
文摘Under repeated train-induced loads, cement and emulsified asphalt mortar(CA mortar) as a viscoelastic material has a time-dependent deformation, part of which is irreversible. This could lead to debonding between the mortar layer and the track slab. Based on the theory of viscoelasticity and the analytical method of the time hardening law(THL), the viscoelastic deformation behavior of CA mortar was studied. Using ABAQUS, we established a solid model of China railway track system(CRTS) Ⅰ prefabricated slab track, with CA mortar at different initial Young’s moduli under cyclic loading corresponding to the influence of actual train loads. The results reveal that the fitted parameters of the THL for CA mortar are suitable for describing its viscoelastic deformation. As the initial Young’s modulus increases, the strain difference before and after cyclic loading gradually decreases, and the displacement difference increases from 0.2 mm to 0.6 mm. The deformation mainly occurs at the end of a mortar layer with longitudinal distribution of about 2.5 times the fasteners’ spacing. It follows that the viscoelastic performance of CA mortar is one of the most important reasons that cause debonding underneath the track slab. Therefore, we suggest that the adverse effects of viscoelastic behavior of CA mortar should be considered when researching such deformation and damage.
文摘Surfactant food emulsifiers are among the most extensively used food additives.Like all authorized food additives,emulsifiers have been evaluated by risk assessors,who consider them as safe.However,there are growing concerns among scientists about their possible harmful effects on intestinal barriers and microbiota.It is also suggested that emulsifier consumption might be one of the main causes of the rising incidence of a number of diseases,such as allergic diseases,celiac disease,type I diabetes and Crohn’s disease.Moreover,it has recently been suggested that emulsifier consumption might contribute to the development of metabolic syndrome and can promote colitis-associated colorectal cancer also.This paper provides an overview of the current scientific knowledge on possible effects of surfactant emulsifiers on intestinal barriers and also of regulatory risk assessment approaches.Our main objective is to reveal the reasons for the discrepancies between the opinions of risk assessors and the scientific world.We would like to draw the attention of the academic world to the need of specific in vivo and/or clinical studies for each emulsifier in order to help risk assessors make adequate evaluations and rule out with certainty that authorized food emulsifiers pose a safety concern to consumers’health.
文摘The oil-in-water emulsion drilling fluids, prepared by adding 5～12% (by volume) of mineral oil (or diesel) to water-based muds, have been widely used for stuck-pipe prevention in the Shengli Oilfield. In some cases, the emulsion stability of this kind of mud system is not strong enough to meet the requirements of drilling operations. To overcome this drawback, a solid emulsifier, which is characterized by its very small particle size and special wetting behavior (slightly water-wet), has been developed and successfully applied to improve the emulsion stability and other performances of these drilling fluids. Prior to the development of this technology, an extensive study was conducted to deal with the influence of various kinds of finely divided insoluble solid particles on oil/water emulsification. The substances used include bentonite, organophilic clay, kaolinite, barite, two kinds of calcium carbonate with different particle sizes, two kinds of silica with different wetting behaviors, and a newly developed solid emulsifier. Both the emulsion stability experiments and the drop coalescence experiments are performed to evaluate the contribution of these particles to emulsification. The measured final emulsion volume disappears after 12 hours and the half-life for water and oil drops are used as the measures of emulsion stability. The experimental data show that the type, size, concentration and wettability of the particles, and the presence of some surfactants control the type and stability of emulsions for a given oil/water system, and the fine particles of the solids emulsifier provide the most effective stabilization for water-continuous emulsions compared with other kinds of particles. Meanwhile, it can be observed that these particles also stabilize oil-continuous emulsions effectively in some cases since their wetting behavior is close to neutral. The O/W emulsion mud stabilized by the newly developed solid emulsifier has become one of the major mud systems used in directional and horizontal well drilling in the Shengli Oilfield. In addition to the improvement of emulsion stability, this solid emulsifier has the advantages of improving the lubricity of mud cake and is beneficial to the control of rheological properties and filtration.
基金the USDA National Institute of Food and Agriculture Hatch project KS17HA1008USDA Agricultural Research Service Cooperative Agreement 58-3020-9-017.
文摘Whole wheat bread is widely available worldwide,but it is always associated with less desirable dough processibility,small loaf volume,firm and gritty texture,and other distinctive attributes compared to white bread.Emulsifiers are commonly used to improve dough handling and baking quality during bread production.In present study,five emulsifiers(diacetyl tartaric acid esters of mono-and diglycerides(DATEM),polysorbate 80,sodium stearoyl lactylate(SSL),soy lecithin,and sucrose esters)were added during dough preparation of the whole wheat flour at 0.2%,0.5%,and 1.0%(flour weight basis).Dough rheological behavior and bread quality attributes,such as specific loaf volume and hardness,were measured.The results showed that DATEM,sucrose esters,and SSL increased the resistance to extension of the dough,whereas soy lecithin and polysorbate 80 increased the extensibility.Soy lecithin and polysorbate 80 were the only emulsifiers that significantly increased loaf volume compared to the control.Adding higher levels(1.0%)of sucrose esters,polysorbate 80,and SSL increased the formation of amylose-lipid complex and mitigate the crumb staling during storage.The results suggested that the emulsifiers could be applied to contribute to optimum functional quality of whole wheat bread.
基金funded by the National Natural Science Foundation of China(Nos.41272253,41402206 and 41530636)the National Science Foundation of Jilin Province(No.20130101027JC)+2 种基金 “the 12th Five-Year Plan” science and technology research projects of education department in Jilin Province(No.2014B012)the Graduate Innovation Fund of Jilin University(No.2015065)grateful for the support of the Key Laboratory of Groundwater Resources and Environment,Ministry of Education
文摘Widespread contamination by nitrobenzene（NB） in sediments and groundwater requires better understanding of the biogeochemical removal process of the pollutant. NB degradation, coupled with dissimilatory iron reduction, is one of the most efficient pollutant removal methods. However, research on NB degradation coupled to indigenous microorganism dissimilatory iron reduction stimulated by electron donors is still experimental. A model for remediation in an actual polluted site does not currently exist.Therefore, in this study, the dynamics was derived from the Michaelis–Menten model（when the mass ratio of emulsified vegetable oil and NB reached the critical value 91：1）. The effect of SO4^（2-）, NO3^-, Ca^（2＋）/Mg^（2＋）, and the grain size of aquifer media on the dynamics were studied, and the NB degradation dynamic model was then modified based on the most significant factors. Utilizing the model, the remediation time could be calculated in a contaminated site.
基金The authors acknowledge the financial support from National Natural Science Foundation of China(No.51968006).
文摘In recent years,with the improvement of the requirements of road performance,modified emulsified asphalts with better performance has gradually replaced the emulsified asphalt and become the primary material for road maintenance.This paper introduces the modified emulsified asphalt materials commonly used in pavement maintenance projects,definitions and modified mechanisms of polymerized styrene butadiene rubber(SBR)modified emulsified asphalt,styrene butadiene styrene block polymer(SBS)modified emulsified asphalt and waterborne epoxy resin(WER)modified emulsified asphalt are summarized.The analysis focused on comparing the effects of modifiers,preparation process,auxiliary additives,and other factors on the performance of modified emulsified asphalt.In this paper,it is considered that the greatest impact on the performance of emulsified asphalt is the modifier,emulsifier mainly affects the speed of breaking the emulsion,stabilizers on the basic performance of emulsified asphalt evaporative residue is small;and when the modifier is distributed in the asphalt in a network,the dosage at this time is the recommended optimum dosage.Finally,this study recommends that in the future,the polymer-asphalt compatibility can be improved through composite modification,chemical grafting and other methods to continue to develop broader applicability and better performance of modified emulsified asphalt.
基金Supported by the National Science Foundation of China(Nos.42076197,U2106211,61890964)the Key Deployment Project of Centre for Ocean Mega-Research of Science,Chinese Academy of Sciences(No.COMS2019J05)。
文摘Synthetic Aperture Radar(SAR) plays a major role in identifying oil spills on the sea surface.However,obtaining information of oil spill thickness(volume) is still a challenge.Emulsification is an important process affecting the thickness and normalized radar cross section(NRCS) of oil film.Experiments of crude oil emulsification with C-band fully-polarized scatterometer were conducted combining airborne hyperspectral imaging spectrometer and 3 D laser scanner observation data,to provide experimental parameters and method to support accurate remote sensing monitoring on marine oil spill.It is further proved that through quantitative homogeneous emulsified oil spill experiments,to a certain extent,the NRCS of oil film increased during the emulsification process of crude oil.The backscattering mechanism of crude oil emulsification was explored using a semi-empirical model(SEM);the change of oil film NRCS was modulated by its dielectric constant and surface roughness,in which the dielectric constant showed a dominant effect.The relationship between thickness and NRCS of oil film was studied under two experimental conditions.The differences of NRCS between oil film and adjacent seawater(Δσ~0) and the damping ratio(DR) were found to have a linear relationship with oil thickness,which were best in the vertical polarization mode(VV) at 45° incident angle during the quantitative crude oil homogeneous emulsification process.In the natural emulsification process of continuous oil spill in which oil film was mixed with both crude oil and emulsified oil,an empirical equation of oil film thickness is preliminarily established.The Δσ~0,DR,and the empirical equation of oil film thickness were applied to the marine continuous oil spill incident on a 19-3 oil platform with spaceborne SAR image and successfully explained the distribution of the relative thickness of the oil film.
基金Project(51174017)supported by the National Natural Science Foundation of China
文摘Corn cob is a naturally renewable material with developed micropore and hydrophobic characteristics, which enables it to show good oil adsorption capacity. In order to improve oil adsorption capacity, corn cob was modified with lauric acid and ethanediol. The structure of raw and modified corn cob was investigated using Fourier transform infrared(FTIR) spectroscopy, scanning electron microscopy(SEM), Brunauer-Emmett-Teller(BET) method, thermogravimetric analysis(TGA) and Ze Ta potential analyzer. The effects of p H level, adsorption time, adsorbent dosage, and initial oil concentration on oil absorbency of corn cob were studied. The results indicate that the modification significantly improved the lipophilicity of corn cob, making the modified corn cob with much better adsorption capacity on oil absorbency. Compared with raw corn cob, the maximum saturated adsorption capacity of modified corn cob is 16.52 mg/g at p H 5, and the increasing percentage is found to be 141%, which indicates that the modification causes a better adsorption capacity for oil removal. In addition, due to high oil adsorption capacity, affordable price and low secondary pollution, the modified corn cob could be considered promising alternative for the traditional oil adsorbent to clean up the emulsified oily water.
