The complex behaviors of expansive soils,particularly their volumetric changes driven by moisture variations,pose significant challenges in urban geotechnical engineering.Although vegetation-induced moisture changes a...The complex behaviors of expansive soils,particularly their volumetric changes driven by moisture variations,pose significant challenges in urban geotechnical engineering.Although vegetation-induced moisture changes are known to affect ground movement,quantitative characterization of tree–soil interactions remains limited due to insufficient field data and unclear relationships between tree water uptake and soil response.This study investigates the mechanical behavior of expansive clay soils influenced by two Lophostemon confertus samples during a 14-month field monitoring program in Melbourne,Australia.The research methodology integrates measurements of soil displacement,total soil suction,moisture content,and tree water consumption through instrumentation and monitoring systems.Field measurements suggest that tree roots reached the limits of their water extraction capacity when total soil suction exceeded 2880 kPa within the active root zone.The spatial extent of tree-induced soil desiccation reached 0.6–0.7 times the tree height laterally and penetrated to depths of 2.5–3.3 m vertically.The mature sample,with an 86%greater crown area and a threefold larger sapwood area,exhibited 142%higher water consumption(35 kL),demonstrating the scalability of tree–soil interaction mechanisms.A multiple linear regression model was developed to quantify the coupled relationships between soil movement and key variables,achieving a high adjusted R2 value of 0.97,which provides engineers and practitioners with a practical tool for estimating ground movement near trees.These findings offer valuable insights for infrastructure design in tree-adjacent environments and can inform computational models and design codes to enable more accurate site assessments and sustainable urban development.展开更多
The study aims to develop an empirical model to predict the rainfall intensity in Al-Diwaniyah City,Iraq,according to a statistical analysis based on probability and the specific rainfall return period.Rainfall data w...The study aims to develop an empirical model to predict the rainfall intensity in Al-Diwaniyah City,Iraq,according to a statistical analysis based on probability and the specific rainfall return period.Rainfall data were collected daily for 25 years starting in 2000.Daily rainfall data were converted to rainfall intensity for five duration periods ranging from one to five hours.The extreme values were checked,and data that deviated from the group trend were removed for each period,and then arranged in descending order using the Weibull formula to calculate the probability.Statistically,the model performance with a return period of two years is considered good when compared with observed results and other methods such as Talbot and Sherman with a coefficient of determination(R2)>0.97 and Nash-Sutcliffe efficiency(NSE)>0.80.The results showed that a mathematical equation was obtained that describes the relationship between rainfall intensity,probability,and rainfall duration,which can be used for a confined return period with a 50% probability.Therefore,decision-makers can rely on the model to improve the performance of the city’s current drainage system during flood periods in the future.展开更多
Due to the complexity of feedstock,it is challenging to build a general model for light olefins production.This work was intended to simulate the formation of ethylene,propene and 1,3-butadiene in alkanes pyrolysis by...Due to the complexity of feedstock,it is challenging to build a general model for light olefins production.This work was intended to simulate the formation of ethylene,propene and 1,3-butadiene in alkanes pyrolysis by referring the effects of normal/cyclo-structures.First,the pyrolysis of n-pentane,n-hexane,n-heptane,n-octane,n-nonane,n-decane,cyclohexane,methylcyclohexane,n-hexane and cyclohexane mixtures,and n-heptane and methylcyclohexane mixtures were carried out at 650–800℃,and a particular attention was paid to the measurement of ethylene,propene and 1,3-butadiene.Then,pseudo-first order kinetics was taken to characterize the pyrolysis process,and the effects of feedstock composition were studied.It was found that chain length and cyclo-alkane content can be qualitatively and quantitively represented by carbon atom number and pseudo-cyclohexane content,which made a significant difference on light olefins formation.Furthermore,the inverse proportional/quadratic function,linear function and exponential function were proposed to simulate the effects of chain length,cycloalkane content and reaction temperature on light olefins formation,respectively.Although the obtained empirical model well reproduced feedstock conversion,ethylene yield and propene yield in normal/cycloalkanes pyrolysis,it exhibited limitations in simulating 1,3-butadiene formation.Finally,the accuracy and flexibility of the present model was validated by predicting light olefins formation in the pyrolysis of multiple hydrocarbon mixtures.The prediction data well agreed with the experiment data for feedstock conversion,ethylene yield and propene yield,and overall characterized the changing trend of 1,3-butadiene yield along with reaction temperature,indicating that the present model could basically reflect light olefins production in the pyrolysis process even for complex feedstock.展开更多
Statistical prediction is often required in reservoir simulation to quantify production uncertainty or assess potential risks.Most existing uncertainty quantification procedures aim to decompose the input random field...Statistical prediction is often required in reservoir simulation to quantify production uncertainty or assess potential risks.Most existing uncertainty quantification procedures aim to decompose the input random field to independent random variables,and may suffer from the curse of dimensionality if the correlation scale is small compared to the domain size.In this work,we develop and test a new approach,K-means clustering assisted empirical modeling,for efficiently estimating waterflooding performance for multiple geological realizations.This method performs single-phase flow simulations in a large number of realizations,and uses K-means clustering to select only a few representatives,on which the two-phase flow simulations are implemented.The empirical models are then adopted to describe the relation between the single-phase solutions and the two-phase solutions using these representatives.Finally,the two-phase solutions in all realizations can be predicted using the empirical models readily.The method is applied to both 2D and 3D synthetic models and is shown to perform well in the P10,P50 and P90 of production rates,as well as the probability distributions as illustrated by cumulative density functions.It is able to capture the ensemble statistics of the Monte Carlo simulation results with a large number of realizations,and the computational cost is significantly reduced.展开更多
An integrated approach to easily calculate pollutant loads from agricultural watersheds is suggested and verified in this research. The basic concepts of this empirical tool were based on the assumption that variation...An integrated approach to easily calculate pollutant loads from agricultural watersheds is suggested and verified in this research. The basic concepts of this empirical tool were based on the assumption that variations in event mean concentrations（EMCs） of pollutants from a given agricultural watershed during rainstorms were only attributable to the rainfall pattern.Fifty one sets of EMC values were obtained from nine different watersheds located in the rural areas of Korea, and these data were used to develop predictive tools for the EMCs in rainfall runoff. The results of statistical tests of these formulas show that they are fairly good in predicting actual EMC values of some parameters, and useful in terms of calculating pollutant loads for any rainfall event time span such as daily, weekly, monthly, and yearly. This model was further checked in for its field applicability in a reservoir receiving stormwater after a cleanup of the sediments, covering 17 consecutive rainfall events from 1 July to 15 August in2007. Overall the predicted values matched the observed values, indicating the feasibility of this empirical tool as a simple and useful solution in evaluating timely distribution of nonpoint source pollution loads from small rural watersheds of Korea.展开更多
Based on the Stratospheric Aerosol and Gas Experiment （SAGE） Ⅱ and the Halogen Occultation Experiment （HALOE） ozone profiles and the Total Ozone Mapping Spectrometer （TOMS） total ozone data sets, an empirical m...Based on the Stratospheric Aerosol and Gas Experiment （SAGE） Ⅱ and the Halogen Occultation Experiment （HALOE） ozone profiles and the Total Ozone Mapping Spectrometer （TOMS） total ozone data sets, an empirical model for estimating the vertical distribution of stratospheric ozone over China is proposed. By using this model, the vertical distribution of stratospheric （16-50 km） ozone can be estimated according to latitude, month and total ozone. Comparisons are made between the modeled ozone profiles and the SAGEII/HALOE monthly mean ozone measurements, and the results show that the model calculated ozone concentrations conform well with the SAGEII/HALOE measured values, with the differences being less than 15% between 16 km and 18 km, less than 5% between 19 km and 40 km, and less than 10% between 41 km and 50 kin. Comparisons of the model results with balloon-borne ozonesonde measurements performed in Beijing also show good agreement, within 5%, at altitudes between 19 km and 30 km.展开更多
This paper presents an empirical model for estimating the zonal mean aerosol extinction profiles in the stratosphere over 10°-wide latitude bands between 60°S and 60°N, on the basis of Stratospheric Aer...This paper presents an empirical model for estimating the zonal mean aerosol extinction profiles in the stratosphere over 10°-wide latitude bands between 60°S and 60°N, on the basis of Stratospheric Aerosol and Gas Experiment(SAGE) II aerosol extinction measurements at 1.02, 0.525, and 0.452 μm during the volcanically quiescent period between 1998–2004. First, an empirical model is developed for calculating the stratospheric aerosol extinction profiles at 1.02 μm. Then, starting from the 1.02 μm extinction profile and an exponential spectral dependence, an empirical algorithm is developed that allows the aerosol extinction profiles at other wavelengths to be calculated. Comparisons of the model-calculated aerosol extinction profiles at the wavelengths of 1.02, 0.525, and 0.452 μm and the SAGE II measurements show that the model-calculated aerosol extinction coefficients conform well with the SAGE II values, with the relative differences generally being within 15% from 2 km above the tropopause to 40 km. The model-calculated stratospheric aerosol optical depths at the three wavelengths are also in good agreement with the corresponding optical depths derived from the SAGE II measurements, with the relative differences being within 0.9% for all latitude bands. This paper provides a useful tool in simulating zonal mean aerosol extinction profiles, which can be used as representative background stratospheric aerosols in view of atmospheric modeling and remote sensing retrievals.展开更多
The global sustainability plan for future development relies on solar radiation which is the main source of renewable energy. Thus, this work studies the performance of six models to estimate global solar radiation on...The global sustainability plan for future development relies on solar radiation which is the main source of renewable energy. Thus, this work studies the performance of six models to estimate global solar radiation on a horizontal surface for the Abeche site in Chad. The data used in this work were collected at the General Directorate of National Meteorology of Chad. The reliability and accuracy of different models for estimating global solar radiation were validated by statistical indicators to identify the most accurate model. The results show that among all the models, the Sabbagh model has the best performance in estimating the global solar radiation. The average is 6.354 kWh/m<sup>2</sup> with an average of -3.704%. This model is validated against NASA data which is widely used.展开更多
The precise correction of atmospheric zenith tropospheric delay(ZTD)is significant for the Global Navigation Satellite System(GNSS)performance regarding positioning accuracy and convergence time.In the past decades,ma...The precise correction of atmospheric zenith tropospheric delay(ZTD)is significant for the Global Navigation Satellite System(GNSS)performance regarding positioning accuracy and convergence time.In the past decades,many empirical ZTD models based on whether the gridded or scattered ZTD products have been proposed and widely used in the GNSS positioning applications.But there is no comprehensive evaluation of these models for the whole China region,which features complicated topography and climate.In this study,we completely assess the typical empirical models,the IGGtropSH model(gridded,non-meteorology),the SHAtropE model(scattered,non-meteorology),and the GPT3 model(gridded,meteorology)using the Crustal Movement Observation Network of China(CMONOC)network.In general,the results show that the three models share consistent performance with RMSE/bias of 37.45/1.63,37.13/2.20,and 38.27/1.34 mm for the GPT3,SHAtropE and IGGtropSH model,respectively.However,the models had a distinct performance regarding geographical distribution,elevation,seasonal variations,and daily variation.In the southeastern region of China,RMSE values are around 50 mm,which are much higher than that in the western region,approximately 20 mm.The SHAtropE model exhibits better performance for areas with large variations in elevation.The GPT3 model and the IGGtropSH model are more stable across different months,and the SHAtropE model based on the GNSS data exhibits superior performance across various UTC epochs.展开更多
Tropospheric zenith wet delay(ZWD)plays a vital role in the analysis of space geodetic observations.In recent years,machine learning methods have been increasingly applied to improve the accuracy of ZWD calculations.H...Tropospheric zenith wet delay(ZWD)plays a vital role in the analysis of space geodetic observations.In recent years,machine learning methods have been increasingly applied to improve the accuracy of ZWD calculations.However,a single machine learning model has limited generalization capabilities.To address these limitations,this study introduces a novel machine learning fusion(MLF)algorithm with stronger generalization capabilities to enhance ZWD modeling and prediction accuracy.The MLF algorithm utilizes a two-layer structure integrating extra trees(ET),backpropagation neural network(BPNN),and linear regression models.By comparing the root mean square error(RMSE)of these models,we found that both ET-based and MLF-based models outperform RF-based and BPNN-based models in terms of internal and external accuracy,across both surface meteorological data-based and blind models.The improvement in exte rnal accuracy is particularly significant in the blind models.Our re sults show that the MLF(with an RMSE of 3.93 cm)and ET(3.99 cm)models outperform the traditional GPT3model(4.07 cm),while the RF(4.21 cm)and BPNN(4.14 cm)have worse external accuracies than the GPT3 model.It is worth noting that the BPNN suffered from overfitting during external accuracy tests,which was avoided by the MLF.In summary,regardless of the availability of surface meteorological data,the MLF-based empirical models demonstrate superior internal and external accuracy compared to the other tested models in this study.展开更多
Pinus radiata(D.Don)dominates New Zealand's forestry industry,constituting 91%of plantations,and is among the world's most important plantation species.Given the socio-economic and environmental importance of ...Pinus radiata(D.Don)dominates New Zealand's forestry industry,constituting 91%of plantations,and is among the world's most important plantation species.Given the socio-economic and environmental importance of this species,it is important to have accurate and precise projections over time to make efficient decisions for forest management and greenfield investments in afforestation projects,especially for permanent carbon forests.Future projections of any natural resource systems rely on modeling;however,the acceleration of climate change makes future projections of yield less certain.These challenges also impact national expectations of the contribution planted forests will provide to address climate change and meet international commitments under the Paris Agreement.Using a large national-scale set of contemporary ground-measured data(2013–2023),this study investigates the performance of two growth models developed over 30 years ago that are widely used by NZ plantation growers:1)the Pumice Plateau Model 1988(PPM88)and 2)the 300-index(including a model variant of regional drift).Model simulations were made using the FORECASTER modeling suite with geographic boundaries to adjust for drift in space and time.Basal area(BA,m^(2)⋅ha^(-1))and volume(m^(3)⋅ha^(-1))were simulated,and standard errors and goodness-of-fit metrics calculated up to a typical rotation age of 30 years.Model residuals were then separated and analysed for the main plantation growing regions.The models overpredicted observed growth by between 6.8%and 16.2%,but model predictions and errors varied significantly between regions.The results of this study provided clear evidence of divergence between the outputs of both models and the measured data.Finally,this study suggests future measures to address challenges posed by these discrepancies that will provide better information for forest management and investment decisions in a changing climate.展开更多
Bathymetric mapping using quantitative remote sensing techniques is a crucial research domain for accurately retrieving oceanic depths.This study uses GF5-AHSI hyperspectral remote sensing data to evaluate the accurac...Bathymetric mapping using quantitative remote sensing techniques is a crucial research domain for accurately retrieving oceanic depths.This study uses GF5-AHSI hyperspectral remote sensing data to evaluate the accuracy of three semi-empirical models for shallow water depth retrieval:single-band,multi-band,and band-ratio models.The methodology involved parameter extraction,optimal band selection,and combining bands to create the models.A Pearson correlation analysis was conducted to assess parameter sensitivity,optimizing the models for water depth retrieval.The models’precision was evaluated by comparing their outputs with actual underwater topography measurements from Meizhou Bay,Fujian Province.Error margins in estimated water depths ranged from 10%to 50%across the three models,with accuracy generally improving at greater depths.Among the models,the band-ratio model showed the highest reliability,followed by the multi-band model,and the single-band model was the least reliable.However,in depths greater than 30 m,the single-band model’s error margin could be reduced to within 10%,surpassing the performance of the multi-band and band-ratio models.A spectral reflectance sensitivity test revealed variations in reflectance across different water depths,with a slight increase in the nearinfrared band due to water turbidity.To further improve model accuracy,strategies must be implemented to mitigate the interference of suspended sediments and reduce noise,thereby enhancing the reliability of water depth retrieval.展开更多
A new comprehensive empirical large signal model for 4H-SiC MESFETs is proposed. An enhanced drain current model,along with an improved charge conservation capacitance model,is presented by the improvement of the chan...A new comprehensive empirical large signal model for 4H-SiC MESFETs is proposed. An enhanced drain current model,along with an improved charge conservation capacitance model,is presented by the improvement of the channel length modulation and the hyperbolic tangent function coefficient based on the Materka model. The Levenberg-Marquardt method is used to optimize the parameter extraction. A comparison of simulation resuits with experimental data is made,and good agreements of I-V curves, Pout （output power）, PAE （power added efficiency） ,and gain at the bias of Vos = 20V, Ips = 80mA as well as the operational frequency of 1.8GHz are obtained.展开更多
Understanding the anisotropic creep behaviors of shale under direct shearing is a challenging issue.In this context,we conducted shear-creep and steady-creep tests on shale with five bedding orientations (i.e.0°,...Understanding the anisotropic creep behaviors of shale under direct shearing is a challenging issue.In this context,we conducted shear-creep and steady-creep tests on shale with five bedding orientations (i.e.0°,30°,45°,60°,and 90°),under multiple levels of direct shearing for the first time.The results show that the anisotropic creep of shale exhibits a significant stress-dependent behavior.Under a low shear stress,the creep compliance of shale increases linearly with the logarithm of time at all bedding orientations,and the increase depends on the bedding orientation and creep time.Under high shear stress conditions,the creep compliance of shale is minimal when the bedding orientation is 0°,and the steady-creep rate of shale increases significantly with increasing bedding orientations of 30°,45°,60°,and 90°.The stress-strain values corresponding to the inception of the accelerated creep stage show an increasing and then decreasing trend with the bedding orientation.A semilogarithmic model that could reflect the stress dependence of the steady-creep rate while considering the hardening and damage process is proposed.The model minimizes the deviation of the calculated steady-state creep rate from the observed value and reveals the behavior of the bedding orientation's influence on the steady-creep rate.The applicability of the five classical empirical creep models is quantitatively evaluated.It shows that the logarithmic model can well explain the experimental creep strain and creep rate,and it can accurately predict long-term shear creep deformation.Based on an improved logarithmic model,the variations in creep parameters with shear stress and bedding orientations are discussed.With abovementioned findings,a mathematical method for constructing an anisotropic shear creep model of shale is proposed,which can characterize the nonlinear dependence of the anisotropic shear creep behavior of shale on the bedding orientation.展开更多
The through-flow analysis is an important part in the compressor design process.In this part,lots of empirical models are used to predict the compressor aerodynamic performances.These models are all based on the early...The through-flow analysis is an important part in the compressor design process.In this part,lots of empirical models are used to predict the compressor aerodynamic performances.These models are all based on the early experimental results of low-load and low-speed compressors;so,they may not be suitable for modern compressor performance estimations.In this study,several empirical models were reviewed,and two new models to estimate the minimum blade profile loss and minimum-loss deviation angle were established using mathematical statistics.Then,the original models with poor accuracy were replaced by these two models in through-flow program.Next,three compressors(Rotor 67,Stage 35,and a 4-stage repeating stage)were simulated using both the original and new models.The final results show that the new models have better accuracy in estimating the performance parameters than the original models.This indicates that it is feasible to use mathematical statistical methods to establish the empirical models,and this method provides an idea for the improvement of other empirical models in through-flow program.展开更多
Increasing the electrode thickness is a significant method to decrease the weight and volume ratio of the inactive components for high energy density of the devices.In this contribution,we extracted a repeating unit i...Increasing the electrode thickness is a significant method to decrease the weight and volume ratio of the inactive components for high energy density of the devices.In this contribution,we extracted a repeating unit in the configurations and establish the empirical energy density model based on some assumptions.In this model,the effects of the electrode thickness on the energy density for lithium-ion batteries(LIBs),lithium metal batteries(LMBs),and anode-free lithium batteries(ALBs)are evaluated quantitively with the current parameters of the batteries.The results demonstrate that the structure evolutions from LIBs,LMBs to ALBs with the reduction of the anode weight contribution,the energy density can be well improved exactly.While the increase of the thickness of the electrode provide another route to furthe r enhance the energydensity by decreasing the weight contribution of inactive materials;meanwhile the effects for ALBs are higher than LMBs and LIBs due to the higher weight ratio of inactive materials.This empirical energy density model is also applied into the practical system and provide intuitional results to guide the battery design for higher energy density.展开更多
The hourly values of the ionospheric F2 layer critical frequency, foF2, recorded at Wakkanai ionosonde station （45.4°N, 141.7°E） have been collected to construct a middle-latitude single-station model for ...The hourly values of the ionospheric F2 layer critical frequency, foF2, recorded at Wakkanai ionosonde station （45.4°N, 141.7°E） have been collected to construct a middle-latitude single-station model for forecasting foF2 under geomagnetic quiet and disturbed conditions. The module for the geomagnetic quiet conditions incorporates local time, seasonal, and solar vari- ability of climatological foF2 and its upper and lower quartiles. It is the first attempt to predict the upper and lower quartiles of foF2 to account for the notable day-to-day variability in ionospheric foF2. The validation statistically verifies that the model captures the climatological variations of foF2 with higher accuracy than IRI does. The storm-time module is built to capture the geomagnetic storm induced relative deviations of foF2 from the quiet time references. In the geomagnetically disturbed module, the storm-induced deviations are described by diumal and semidiumal waves, which are modulated by a modified magnetic activity index, the Kf index, reflecting the delayed responses of foF2 to geomagnetic activity forcing. The coeffi- cients of the model in each month are determined by fitting the model formula to the observation in a least-squares way. We provide two options for the geomagnetic disturbed module, including or not including Kalman filter algorithm. The Kalman filter algorithm is introduced to optimize these coefficients in real time. Our results demonstrate that the introduction of the Kalman filter algorithm in the storm time module is promising for improving the accuracy of predication. In addition, comparisons indicate that the IRI model prediction of the F2 layer can be improved to provide better performances over this region.展开更多
Concrete structures undergo integral fragmentation under explosion loads. The fragmentation degree and particle-size distribution of concrete blocks under explosion loads must be considered during mining to ensure saf...Concrete structures undergo integral fragmentation under explosion loads. The fragmentation degree and particle-size distribution of concrete blocks under explosion loads must be considered during mining to ensure safety. In this study, the impulse is calculated based on the relationship between overpressure and time, and the impact energy of the explosion wave is obtained based on blast theory. Subsequently, the Mohr-Coulomb shear strength fracture criterion is introduced to determine the ultimate shear stress of the concrete materials, and an empirical model that can effectively calculate the energy consumption of concrete blocks under explosion loads is established. Furthermore, concrete fragments with different particle sizes under explosion scenarios are quantitatively predicted with the principle of energy conservation. Finally, explosion tests with different top standoff distances are conducted, and the concrete fragments after the explosion tests are recovered, sieved, weighed, and counted to obtain experimental data. The effectiveness of the fragment empirical model is verified by comparing the model calculation results with the experimental data. The proposed model can be used as a reference for civil blasting, protective engineering design, and explosion-damage assessment.展开更多
With the purpose to smooth the way of a correct understanding of information concepts and their evolution,in this paper,is discussed the evolution and development of the concept of information in biological systems,sh...With the purpose to smooth the way of a correct understanding of information concepts and their evolution,in this paper,is discussed the evolution and development of the concept of information in biological systems,showing that this concept was intuitively perceived even since ancient times by our predecessors,and described according to their language level of that times,but the crystallization of the real meaning of information is an achievement of our nowadays,by successive contribution of various scientific branches and personalities of the scientific community of the world,leading to a modern description/modeling of reality,in which information plays a fundamental role.It is shown that our reality can be understood as a contribution of matter/energy/information and represented/discussed as the model of the Universal Triangle of Reality(UTR),where various previous models can be suggestively inserted,as a function of their basic concern.The modern concepts on information starting from a theoretic experiment which would infringe the thermodynamics laws and reaching the theory of information and modern philosophic concepts on the world structuration allow us to show that information is a fundamental component of the material world and of the biological structures,in correlation with the structuration/destructuration processes of matter,involving absorption/release of information.Based on these concepts,is discussed the functionality of the biologic structures and is presented the informational model of the human body and living structures,as a general model of info-organization on the entire biological scale,showing that a rudimentary proto-consciousness should be operative even at the low-scale biological systems,because they work on the same principles,like the most developed bio-systems.The operability of biologic structures as informational devices is also pointed out.展开更多
Generally one dimensional （l-D） empirical salinity intrusion model is limited to natural alluvial estuary. However, this study attempts to investigate its ability to model a sheltered alluvial estuary of the Terengg...Generally one dimensional （l-D） empirical salinity intrusion model is limited to natural alluvial estuary. However, this study attempts to investigate its ability to model a sheltered alluvial estuary of the Terengganu River in Malaysia. The constructed breakwater at the mouth of the river shelters the estuary from direct influence of the open sea. The salinity density along the estuary was collected during the wet and dry seasons for scenarios before and after the constructed breakwater. Moreover, the freshwater discharges, tidal elevations and bathymetry data were also measured as model inputs. A good fit was demonstrated between simulated and observed variables, namely salinity distribution and intrusion length for both scenarios. Thus, the results show that 1-D empirical salinity model can be utilized for sheltered estuarine condition at the Terengganu Estuary, but with an appropriate determination of an initial point. Furthermore, it was observed that the salinity intrusion in the study area is largely dependent on the freshwater discharge rather than tidal elevation fluctuations. The scale of the salinity intrusion length in the study area is proportional to the river discharge of the -1/2 power. It was appeared that the two lines of the 1-D empirical salinity model and discharge power based equation fitted well to each other, with the average predicted minimum freshwater discharge of 150 m^3/s is going to be required to maintain acceptable salinity levels during high water slack （HWS） near the water intake station, which is located at 10.63 km from river mouth.展开更多
基金funded by the Australian Research Council via the ARC Linkage(Grant No.LP16160100649).
文摘The complex behaviors of expansive soils,particularly their volumetric changes driven by moisture variations,pose significant challenges in urban geotechnical engineering.Although vegetation-induced moisture changes are known to affect ground movement,quantitative characterization of tree–soil interactions remains limited due to insufficient field data and unclear relationships between tree water uptake and soil response.This study investigates the mechanical behavior of expansive clay soils influenced by two Lophostemon confertus samples during a 14-month field monitoring program in Melbourne,Australia.The research methodology integrates measurements of soil displacement,total soil suction,moisture content,and tree water consumption through instrumentation and monitoring systems.Field measurements suggest that tree roots reached the limits of their water extraction capacity when total soil suction exceeded 2880 kPa within the active root zone.The spatial extent of tree-induced soil desiccation reached 0.6–0.7 times the tree height laterally and penetrated to depths of 2.5–3.3 m vertically.The mature sample,with an 86%greater crown area and a threefold larger sapwood area,exhibited 142%higher water consumption(35 kL),demonstrating the scalability of tree–soil interaction mechanisms.A multiple linear regression model was developed to quantify the coupled relationships between soil movement and key variables,achieving a high adjusted R2 value of 0.97,which provides engineers and practitioners with a practical tool for estimating ground movement near trees.These findings offer valuable insights for infrastructure design in tree-adjacent environments and can inform computational models and design codes to enable more accurate site assessments and sustainable urban development.
文摘The study aims to develop an empirical model to predict the rainfall intensity in Al-Diwaniyah City,Iraq,according to a statistical analysis based on probability and the specific rainfall return period.Rainfall data were collected daily for 25 years starting in 2000.Daily rainfall data were converted to rainfall intensity for five duration periods ranging from one to five hours.The extreme values were checked,and data that deviated from the group trend were removed for each period,and then arranged in descending order using the Weibull formula to calculate the probability.Statistically,the model performance with a return period of two years is considered good when compared with observed results and other methods such as Talbot and Sherman with a coefficient of determination(R2)>0.97 and Nash-Sutcliffe efficiency(NSE)>0.80.The results showed that a mathematical equation was obtained that describes the relationship between rainfall intensity,probability,and rainfall duration,which can be used for a confined return period with a 50% probability.Therefore,decision-makers can rely on the model to improve the performance of the city’s current drainage system during flood periods in the future.
基金the financial support from the National Natural Science Foundation of China (21908010)Jilin Provincial Department of science and technology (20200201095JC)
文摘Due to the complexity of feedstock,it is challenging to build a general model for light olefins production.This work was intended to simulate the formation of ethylene,propene and 1,3-butadiene in alkanes pyrolysis by referring the effects of normal/cyclo-structures.First,the pyrolysis of n-pentane,n-hexane,n-heptane,n-octane,n-nonane,n-decane,cyclohexane,methylcyclohexane,n-hexane and cyclohexane mixtures,and n-heptane and methylcyclohexane mixtures were carried out at 650–800℃,and a particular attention was paid to the measurement of ethylene,propene and 1,3-butadiene.Then,pseudo-first order kinetics was taken to characterize the pyrolysis process,and the effects of feedstock composition were studied.It was found that chain length and cyclo-alkane content can be qualitatively and quantitively represented by carbon atom number and pseudo-cyclohexane content,which made a significant difference on light olefins formation.Furthermore,the inverse proportional/quadratic function,linear function and exponential function were proposed to simulate the effects of chain length,cycloalkane content and reaction temperature on light olefins formation,respectively.Although the obtained empirical model well reproduced feedstock conversion,ethylene yield and propene yield in normal/cycloalkanes pyrolysis,it exhibited limitations in simulating 1,3-butadiene formation.Finally,the accuracy and flexibility of the present model was validated by predicting light olefins formation in the pyrolysis of multiple hydrocarbon mixtures.The prediction data well agreed with the experiment data for feedstock conversion,ethylene yield and propene yield,and overall characterized the changing trend of 1,3-butadiene yield along with reaction temperature,indicating that the present model could basically reflect light olefins production in the pyrolysis process even for complex feedstock.
基金the funding supported by Beijing Natural Science Foundation(Grant No.3222037)the PetroChina Innovation Foundation(Grant No.2020D-5007-0203)by the Science Foundation of China University of Petroleum,Beijing(Nos.2462021YXZZ010,2462018QZDX13,and 2462020YXZZ028)
文摘Statistical prediction is often required in reservoir simulation to quantify production uncertainty or assess potential risks.Most existing uncertainty quantification procedures aim to decompose the input random field to independent random variables,and may suffer from the curse of dimensionality if the correlation scale is small compared to the domain size.In this work,we develop and test a new approach,K-means clustering assisted empirical modeling,for efficiently estimating waterflooding performance for multiple geological realizations.This method performs single-phase flow simulations in a large number of realizations,and uses K-means clustering to select only a few representatives,on which the two-phase flow simulations are implemented.The empirical models are then adopted to describe the relation between the single-phase solutions and the two-phase solutions using these representatives.Finally,the two-phase solutions in all realizations can be predicted using the empirical models readily.The method is applied to both 2D and 3D synthetic models and is shown to perform well in the P10,P50 and P90 of production rates,as well as the probability distributions as illustrated by cumulative density functions.It is able to capture the ensemble statistics of the Monte Carlo simulation results with a large number of realizations,and the computational cost is significantly reduced.
基金supported by the Eco-Star Aquatic Ecosystem Restoration Research Program, KoreaExtensive sampling programs were supported by the Sustainable Water Resource Development Research Fund, Korea
文摘An integrated approach to easily calculate pollutant loads from agricultural watersheds is suggested and verified in this research. The basic concepts of this empirical tool were based on the assumption that variations in event mean concentrations（EMCs） of pollutants from a given agricultural watershed during rainstorms were only attributable to the rainfall pattern.Fifty one sets of EMC values were obtained from nine different watersheds located in the rural areas of Korea, and these data were used to develop predictive tools for the EMCs in rainfall runoff. The results of statistical tests of these formulas show that they are fairly good in predicting actual EMC values of some parameters, and useful in terms of calculating pollutant loads for any rainfall event time span such as daily, weekly, monthly, and yearly. This model was further checked in for its field applicability in a reservoir receiving stormwater after a cleanup of the sediments, covering 17 consecutive rainfall events from 1 July to 15 August in2007. Overall the predicted values matched the observed values, indicating the feasibility of this empirical tool as a simple and useful solution in evaluating timely distribution of nonpoint source pollution loads from small rural watersheds of Korea.
基金supported by the National Natural Sciences Foundation of China (Grant No. 40475014) the National Basic Re-search Program of China (Grant No. 2006CB403702).
文摘Based on the Stratospheric Aerosol and Gas Experiment （SAGE） Ⅱ and the Halogen Occultation Experiment （HALOE） ozone profiles and the Total Ozone Mapping Spectrometer （TOMS） total ozone data sets, an empirical model for estimating the vertical distribution of stratospheric ozone over China is proposed. By using this model, the vertical distribution of stratospheric （16-50 km） ozone can be estimated according to latitude, month and total ozone. Comparisons are made between the modeled ozone profiles and the SAGEII/HALOE monthly mean ozone measurements, and the results show that the model calculated ozone concentrations conform well with the SAGEII/HALOE measured values, with the differences being less than 15% between 16 km and 18 km, less than 5% between 19 km and 40 km, and less than 10% between 41 km and 50 kin. Comparisons of the model results with balloon-borne ozonesonde measurements performed in Beijing also show good agreement, within 5%, at altitudes between 19 km and 30 km.
基金supported by the National Natural Science Foundation of China (Grant No. 41275047)the National Basic Research Program of China (Grant No. 2013CB955801)the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDA05100300)
文摘This paper presents an empirical model for estimating the zonal mean aerosol extinction profiles in the stratosphere over 10°-wide latitude bands between 60°S and 60°N, on the basis of Stratospheric Aerosol and Gas Experiment(SAGE) II aerosol extinction measurements at 1.02, 0.525, and 0.452 μm during the volcanically quiescent period between 1998–2004. First, an empirical model is developed for calculating the stratospheric aerosol extinction profiles at 1.02 μm. Then, starting from the 1.02 μm extinction profile and an exponential spectral dependence, an empirical algorithm is developed that allows the aerosol extinction profiles at other wavelengths to be calculated. Comparisons of the model-calculated aerosol extinction profiles at the wavelengths of 1.02, 0.525, and 0.452 μm and the SAGE II measurements show that the model-calculated aerosol extinction coefficients conform well with the SAGE II values, with the relative differences generally being within 15% from 2 km above the tropopause to 40 km. The model-calculated stratospheric aerosol optical depths at the three wavelengths are also in good agreement with the corresponding optical depths derived from the SAGE II measurements, with the relative differences being within 0.9% for all latitude bands. This paper provides a useful tool in simulating zonal mean aerosol extinction profiles, which can be used as representative background stratospheric aerosols in view of atmospheric modeling and remote sensing retrievals.
文摘The global sustainability plan for future development relies on solar radiation which is the main source of renewable energy. Thus, this work studies the performance of six models to estimate global solar radiation on a horizontal surface for the Abeche site in Chad. The data used in this work were collected at the General Directorate of National Meteorology of Chad. The reliability and accuracy of different models for estimating global solar radiation were validated by statistical indicators to identify the most accurate model. The results show that among all the models, the Sabbagh model has the best performance in estimating the global solar radiation. The average is 6.354 kWh/m<sup>2</sup> with an average of -3.704%. This model is validated against NASA data which is widely used.
基金supported by the National Natural Science Foundation of China(42204022,52174160,52274169)Open Fund of Hubei Luojia Laboratory(230100031)+2 种基金the Open Fund of State Laboratory of Information Engineering in Surveying,Mapping and Remote Sensing,Wuhan University(23P02)the Fundamental Research Funds for the Central Universities(2023ZKPYDC10)China University of Mining and Technology-Beijing Innovation Training Program for College Students(202302014,202202023)。
文摘The precise correction of atmospheric zenith tropospheric delay(ZTD)is significant for the Global Navigation Satellite System(GNSS)performance regarding positioning accuracy and convergence time.In the past decades,many empirical ZTD models based on whether the gridded or scattered ZTD products have been proposed and widely used in the GNSS positioning applications.But there is no comprehensive evaluation of these models for the whole China region,which features complicated topography and climate.In this study,we completely assess the typical empirical models,the IGGtropSH model(gridded,non-meteorology),the SHAtropE model(scattered,non-meteorology),and the GPT3 model(gridded,meteorology)using the Crustal Movement Observation Network of China(CMONOC)network.In general,the results show that the three models share consistent performance with RMSE/bias of 37.45/1.63,37.13/2.20,and 38.27/1.34 mm for the GPT3,SHAtropE and IGGtropSH model,respectively.However,the models had a distinct performance regarding geographical distribution,elevation,seasonal variations,and daily variation.In the southeastern region of China,RMSE values are around 50 mm,which are much higher than that in the western region,approximately 20 mm.The SHAtropE model exhibits better performance for areas with large variations in elevation.The GPT3 model and the IGGtropSH model are more stable across different months,and the SHAtropE model based on the GNSS data exhibits superior performance across various UTC epochs.
基金funded by National Natural Science Foundation of China Key Program(12431014)Key Project of Hunan Education Department(22A0126)+1 种基金Natural Science Foundation of Hunan Province(2022JJ30555)Postgraduate Scientific Research Innovation Project of Xiangtan University(XDCX2024Y172)。
文摘Tropospheric zenith wet delay(ZWD)plays a vital role in the analysis of space geodetic observations.In recent years,machine learning methods have been increasingly applied to improve the accuracy of ZWD calculations.However,a single machine learning model has limited generalization capabilities.To address these limitations,this study introduces a novel machine learning fusion(MLF)algorithm with stronger generalization capabilities to enhance ZWD modeling and prediction accuracy.The MLF algorithm utilizes a two-layer structure integrating extra trees(ET),backpropagation neural network(BPNN),and linear regression models.By comparing the root mean square error(RMSE)of these models,we found that both ET-based and MLF-based models outperform RF-based and BPNN-based models in terms of internal and external accuracy,across both surface meteorological data-based and blind models.The improvement in exte rnal accuracy is particularly significant in the blind models.Our re sults show that the MLF(with an RMSE of 3.93 cm)and ET(3.99 cm)models outperform the traditional GPT3model(4.07 cm),while the RF(4.21 cm)and BPNN(4.14 cm)have worse external accuracies than the GPT3 model.It is worth noting that the BPNN suffered from overfitting during external accuracy tests,which was avoided by the MLF.In summary,regardless of the availability of surface meteorological data,the MLF-based empirical models demonstrate superior internal and external accuracy compared to the other tested models in this study.
基金funded by Scion's Strategic Science Investment Fund(SSIF)the Forest Growers Levy Trust(FGLT)through the Resilient Forests Programme(Task No.A89220)。
文摘Pinus radiata(D.Don)dominates New Zealand's forestry industry,constituting 91%of plantations,and is among the world's most important plantation species.Given the socio-economic and environmental importance of this species,it is important to have accurate and precise projections over time to make efficient decisions for forest management and greenfield investments in afforestation projects,especially for permanent carbon forests.Future projections of any natural resource systems rely on modeling;however,the acceleration of climate change makes future projections of yield less certain.These challenges also impact national expectations of the contribution planted forests will provide to address climate change and meet international commitments under the Paris Agreement.Using a large national-scale set of contemporary ground-measured data(2013–2023),this study investigates the performance of two growth models developed over 30 years ago that are widely used by NZ plantation growers:1)the Pumice Plateau Model 1988(PPM88)and 2)the 300-index(including a model variant of regional drift).Model simulations were made using the FORECASTER modeling suite with geographic boundaries to adjust for drift in space and time.Basal area(BA,m^(2)⋅ha^(-1))and volume(m^(3)⋅ha^(-1))were simulated,and standard errors and goodness-of-fit metrics calculated up to a typical rotation age of 30 years.Model residuals were then separated and analysed for the main plantation growing regions.The models overpredicted observed growth by between 6.8%and 16.2%,but model predictions and errors varied significantly between regions.The results of this study provided clear evidence of divergence between the outputs of both models and the measured data.Finally,this study suggests future measures to address challenges posed by these discrepancies that will provide better information for forest management and investment decisions in a changing climate.
基金supported by the National Natural Science Foundation of China(Grant No.42171282)the Open Project of Middle Yarlung Zangbo River Natural Resources Observation and Research Station,China(No.2024YJZKF005)+3 种基金Key Laboratory of Spatial Data Mining&Information Sharing of Ministry of Education(No.2023LSDMIS04)Spatial Information Acquisition and Application Joint Laboratory of Anhui Province(No.2024tlxykjxx002)the Zhejiang Provincial Natural Science Foundation of China(No.LY22D010002)the Tibet Autonomous Region Science and Technology Plan Projects(No.XZ202401JD0024).
文摘Bathymetric mapping using quantitative remote sensing techniques is a crucial research domain for accurately retrieving oceanic depths.This study uses GF5-AHSI hyperspectral remote sensing data to evaluate the accuracy of three semi-empirical models for shallow water depth retrieval:single-band,multi-band,and band-ratio models.The methodology involved parameter extraction,optimal band selection,and combining bands to create the models.A Pearson correlation analysis was conducted to assess parameter sensitivity,optimizing the models for water depth retrieval.The models’precision was evaluated by comparing their outputs with actual underwater topography measurements from Meizhou Bay,Fujian Province.Error margins in estimated water depths ranged from 10%to 50%across the three models,with accuracy generally improving at greater depths.Among the models,the band-ratio model showed the highest reliability,followed by the multi-band model,and the single-band model was the least reliable.However,in depths greater than 30 m,the single-band model’s error margin could be reduced to within 10%,surpassing the performance of the multi-band and band-ratio models.A spectral reflectance sensitivity test revealed variations in reflectance across different water depths,with a slight increase in the nearinfrared band due to water turbidity.To further improve model accuracy,strategies must be implemented to mitigate the interference of suspended sediments and reduce noise,thereby enhancing the reliability of water depth retrieval.
文摘A new comprehensive empirical large signal model for 4H-SiC MESFETs is proposed. An enhanced drain current model,along with an improved charge conservation capacitance model,is presented by the improvement of the channel length modulation and the hyperbolic tangent function coefficient based on the Materka model. The Levenberg-Marquardt method is used to optimize the parameter extraction. A comparison of simulation resuits with experimental data is made,and good agreements of I-V curves, Pout （output power）, PAE （power added efficiency） ,and gain at the bias of Vos = 20V, Ips = 80mA as well as the operational frequency of 1.8GHz are obtained.
基金funded by the National Natural Science Foundation of China(Grant Nos.U22A20166 and 12172230)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2023A1515012654)+1 种基金funded by the National Natural Science Foundation of China(Grant Nos.U22A20166 and 12172230)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2023A1515012654)。
文摘Understanding the anisotropic creep behaviors of shale under direct shearing is a challenging issue.In this context,we conducted shear-creep and steady-creep tests on shale with five bedding orientations (i.e.0°,30°,45°,60°,and 90°),under multiple levels of direct shearing for the first time.The results show that the anisotropic creep of shale exhibits a significant stress-dependent behavior.Under a low shear stress,the creep compliance of shale increases linearly with the logarithm of time at all bedding orientations,and the increase depends on the bedding orientation and creep time.Under high shear stress conditions,the creep compliance of shale is minimal when the bedding orientation is 0°,and the steady-creep rate of shale increases significantly with increasing bedding orientations of 30°,45°,60°,and 90°.The stress-strain values corresponding to the inception of the accelerated creep stage show an increasing and then decreasing trend with the bedding orientation.A semilogarithmic model that could reflect the stress dependence of the steady-creep rate while considering the hardening and damage process is proposed.The model minimizes the deviation of the calculated steady-state creep rate from the observed value and reveals the behavior of the bedding orientation's influence on the steady-creep rate.The applicability of the five classical empirical creep models is quantitatively evaluated.It shows that the logarithmic model can well explain the experimental creep strain and creep rate,and it can accurately predict long-term shear creep deformation.Based on an improved logarithmic model,the variations in creep parameters with shear stress and bedding orientations are discussed.With abovementioned findings,a mathematical method for constructing an anisotropic shear creep model of shale is proposed,which can characterize the nonlinear dependence of the anisotropic shear creep behavior of shale on the bedding orientation.
基金the National Natural Science Foundation of China for funding this work(Grant No.51676015).
文摘The through-flow analysis is an important part in the compressor design process.In this part,lots of empirical models are used to predict the compressor aerodynamic performances.These models are all based on the early experimental results of low-load and low-speed compressors;so,they may not be suitable for modern compressor performance estimations.In this study,several empirical models were reviewed,and two new models to estimate the minimum blade profile loss and minimum-loss deviation angle were established using mathematical statistics.Then,the original models with poor accuracy were replaced by these two models in through-flow program.Next,three compressors(Rotor 67,Stage 35,and a 4-stage repeating stage)were simulated using both the original and new models.The final results show that the new models have better accuracy in estimating the performance parameters than the original models.This indicates that it is feasible to use mathematical statistical methods to establish the empirical models,and this method provides an idea for the improvement of other empirical models in through-flow program.
基金financial support from the National Natural Science Foundation of China,Grant No.51777140。
文摘Increasing the electrode thickness is a significant method to decrease the weight and volume ratio of the inactive components for high energy density of the devices.In this contribution,we extracted a repeating unit in the configurations and establish the empirical energy density model based on some assumptions.In this model,the effects of the electrode thickness on the energy density for lithium-ion batteries(LIBs),lithium metal batteries(LMBs),and anode-free lithium batteries(ALBs)are evaluated quantitively with the current parameters of the batteries.The results demonstrate that the structure evolutions from LIBs,LMBs to ALBs with the reduction of the anode weight contribution,the energy density can be well improved exactly.While the increase of the thickness of the electrode provide another route to furthe r enhance the energydensity by decreasing the weight contribution of inactive materials;meanwhile the effects for ALBs are higher than LMBs and LIBs due to the higher weight ratio of inactive materials.This empirical energy density model is also applied into the practical system and provide intuitional results to guide the battery design for higher energy density.
基金supported by the CMA (Grant No. GYHY201106011)the National Basic Research Program of China ("973" Project) (Grant No. 2012CB- 825604)+1 种基金the National Natural Science Foundation of China (Grant Nos. 41074112, 41174137, 41174138)the Specialized Research Fund for State Key Laboratories
文摘The hourly values of the ionospheric F2 layer critical frequency, foF2, recorded at Wakkanai ionosonde station （45.4°N, 141.7°E） have been collected to construct a middle-latitude single-station model for forecasting foF2 under geomagnetic quiet and disturbed conditions. The module for the geomagnetic quiet conditions incorporates local time, seasonal, and solar vari- ability of climatological foF2 and its upper and lower quartiles. It is the first attempt to predict the upper and lower quartiles of foF2 to account for the notable day-to-day variability in ionospheric foF2. The validation statistically verifies that the model captures the climatological variations of foF2 with higher accuracy than IRI does. The storm-time module is built to capture the geomagnetic storm induced relative deviations of foF2 from the quiet time references. In the geomagnetically disturbed module, the storm-induced deviations are described by diumal and semidiumal waves, which are modulated by a modified magnetic activity index, the Kf index, reflecting the delayed responses of foF2 to geomagnetic activity forcing. The coeffi- cients of the model in each month are determined by fitting the model formula to the observation in a least-squares way. We provide two options for the geomagnetic disturbed module, including or not including Kalman filter algorithm. The Kalman filter algorithm is introduced to optimize these coefficients in real time. Our results demonstrate that the introduction of the Kalman filter algorithm in the storm time module is promising for improving the accuracy of predication. In addition, comparisons indicate that the IRI model prediction of the F2 layer can be improved to provide better performances over this region.
基金supported by the National Natural Science Foundation of China (Grant Nos. 12032006 and 12372350)。
文摘Concrete structures undergo integral fragmentation under explosion loads. The fragmentation degree and particle-size distribution of concrete blocks under explosion loads must be considered during mining to ensure safety. In this study, the impulse is calculated based on the relationship between overpressure and time, and the impact energy of the explosion wave is obtained based on blast theory. Subsequently, the Mohr-Coulomb shear strength fracture criterion is introduced to determine the ultimate shear stress of the concrete materials, and an empirical model that can effectively calculate the energy consumption of concrete blocks under explosion loads is established. Furthermore, concrete fragments with different particle sizes under explosion scenarios are quantitatively predicted with the principle of energy conservation. Finally, explosion tests with different top standoff distances are conducted, and the concrete fragments after the explosion tests are recovered, sieved, weighed, and counted to obtain experimental data. The effectiveness of the fragment empirical model is verified by comparing the model calculation results with the experimental data. The proposed model can be used as a reference for civil blasting, protective engineering design, and explosion-damage assessment.
文摘With the purpose to smooth the way of a correct understanding of information concepts and their evolution,in this paper,is discussed the evolution and development of the concept of information in biological systems,showing that this concept was intuitively perceived even since ancient times by our predecessors,and described according to their language level of that times,but the crystallization of the real meaning of information is an achievement of our nowadays,by successive contribution of various scientific branches and personalities of the scientific community of the world,leading to a modern description/modeling of reality,in which information plays a fundamental role.It is shown that our reality can be understood as a contribution of matter/energy/information and represented/discussed as the model of the Universal Triangle of Reality(UTR),where various previous models can be suggestively inserted,as a function of their basic concern.The modern concepts on information starting from a theoretic experiment which would infringe the thermodynamics laws and reaching the theory of information and modern philosophic concepts on the world structuration allow us to show that information is a fundamental component of the material world and of the biological structures,in correlation with the structuration/destructuration processes of matter,involving absorption/release of information.Based on these concepts,is discussed the functionality of the biologic structures and is presented the informational model of the human body and living structures,as a general model of info-organization on the entire biological scale,showing that a rudimentary proto-consciousness should be operative even at the low-scale biological systems,because they work on the same principles,like the most developed bio-systems.The operability of biologic structures as informational devices is also pointed out.
文摘Generally one dimensional （l-D） empirical salinity intrusion model is limited to natural alluvial estuary. However, this study attempts to investigate its ability to model a sheltered alluvial estuary of the Terengganu River in Malaysia. The constructed breakwater at the mouth of the river shelters the estuary from direct influence of the open sea. The salinity density along the estuary was collected during the wet and dry seasons for scenarios before and after the constructed breakwater. Moreover, the freshwater discharges, tidal elevations and bathymetry data were also measured as model inputs. A good fit was demonstrated between simulated and observed variables, namely salinity distribution and intrusion length for both scenarios. Thus, the results show that 1-D empirical salinity model can be utilized for sheltered estuarine condition at the Terengganu Estuary, but with an appropriate determination of an initial point. Furthermore, it was observed that the salinity intrusion in the study area is largely dependent on the freshwater discharge rather than tidal elevation fluctuations. The scale of the salinity intrusion length in the study area is proportional to the river discharge of the -1/2 power. It was appeared that the two lines of the 1-D empirical salinity model and discharge power based equation fitted well to each other, with the average predicted minimum freshwater discharge of 150 m^3/s is going to be required to maintain acceptable salinity levels during high water slack （HWS） near the water intake station, which is located at 10.63 km from river mouth.
